1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-04 12:24:11 +01:00
Commit Graph

152 Commits

Author SHA1 Message Date
peabody124
0e7661539e OP-238 AHRS Comms: Bring down clock rate of comms to AHRS to 2.25 MHz. Decrease
to only transmitting one object per transmission too to keep size down.
Also move to using the driver structure so the paramter is in a clear place.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2333 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-05 10:34:42 +00:00
andrew
2f38fe2269 Updated Alarms.c Modified flight alarm code to NOT set SystemAlarms to an "Uninitialised" value on startup.
This allows the UAVObjectGenerator generated code to set the default values.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2301 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-28 04:19:41 +00:00
andrew
e7e0f6740b Modified flight alarm code to set SystemAlarms to an "Uninitialised" value on startup.
This means that any defined alarms that don't have their flight module compiled in will show uninitialised rather than OK

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2295 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-27 07:30:36 +00:00
edouard
d8edab8371 Added a (fake) pios_servo module in PiOS.posix, this makes it possible to compile the Actuator module and see servo output values, or at least
what they would be on a real board. Also fixed a typo in stabilization.c which made me lose time when trying to understand the code...




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2260 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-20 16:38:17 +00:00
kokomojoe
6499da40e3 OP-185 Flight Added init function for PIOS_IAP helper functions.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1892 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 02:07:11 +00:00
zedamota
e8d6e7c557 Flight - Centralized board specific files, BL and User FW uses the same board definitions, no need to have 2.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1663 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 19:19:38 +00:00
pip
73c8194acc Added PIOS_COM_TELEM_BAUDRATE, PIOS_COM_GPS_BAUDRATE, PIOS_COM_AUX_BAUDRATE & PIOS_COM_SPEKTRUM_BAUDRATE defines in pios_board.h with '#if defines' in pios_board.c for easier baudrate changing.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1644 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:18:38 +00:00
stac
ac6989fbeb bmp085: fix configuration of EOC interrupt
The EOC EXTI interrupt configuration was incorrectly
pointing at GPIOG pin 8 rather than GPIOC pin 15.
This was preventing the EOC interrupt from working
properly.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1626 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:59 +00:00
stac
95595664c3 telemetry: fix comments around #ifdef
No functional changes.

The closing comment on some of the USB_HID related
ifdefs was outdated.  Fixed.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1541 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-05 23:10:34 +00:00
peabody124
a084d21804 Merge branch 'watchdog'
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1281 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-13 05:18:17 +00:00
stac
f74c6ffdd5 i2c: rewrite i2c layer
The STM32 I2C block has a number of errata associated with it.
These errata are primarily related to timing sensitivities between
the peripheral and the interrupt handler.  In particular, the
correct generation of the stop bit relies on the I2C IRQ running
immediately and not being held off for any reason.

NOTE: The I2C interrupts must be the highest priority IRQs in the
      system to ensure correct operation.

I2C protocol is now implemented as a formal state machine.
See: stm32_i2c_fsm.{dot,jpg} for FSM description.

I2C init is now expressed by const initializers in pios_board.c
for both OP and AHRS boards.

I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays
of an unlimited number of bus transfers to be done atomically.
The I2C adapter driver now handles all bus-level locking across the
list of transactions.  Generation of start/restart/stop conditions
are handled automatically over the list of transactions.

Timeouts have been removed from the API for now.  May be added
back later.

This driver has run error free on both the OP and AHRS boards for
up to 48hrs but it still sometimes fails earlier than that on the OP
board.  There is another possible set of improvements to the driver
that could employ the DMA engine for transfers of >= 2bytes.  This
change would reduce the timing sensitivities between the peripheral
and the driver but unfortunately, both the SPI and I2C interfaces
share the DMA1 engine.  That means only one of these two peripherals
can use the DMA engine and right now, SPI between OP and AHRS is
already using it.

Failures are currently fatal and will lock up the CPU.  This allows
useful information to be obtained in the failure cases.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:15:08 +00:00
sambas
7f6336d324 OP-22 Flight/PiOS: Spektrum reworked, input is mapped to old aux in receiver connector, works nicely with calibration plugin. Also bind works, just needs config flag to bind on powerup
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1189 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-01 10:34:07 +00:00
corvus
c8486d08e4 Fixed some bugs in OpenPilot Core.
- syntax error in pios_board_posix.c introduced with Doxygen comment blocks
- platform dependant code had been added to openpilot.c instead of pios_board.c
- redundant header inclusion (stm32... already included by PiOS)


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1171 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 14:34:48 +00:00
dankers
32e6d53b23 Small comment issue that was causing build to fail
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1170 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 11:28:18 +00:00
edouard
9145a4b1a6 Doxygen work: created "OpenPilot System" group for system libraries and core files. Changed a typo on the Osd Doxygen. Let me know if you're OK with this approach.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1169 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 07:28:21 +00:00
peabody124
7d7802593e Oops, sorry missed these files
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1160 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 08:08:50 +00:00
corvus
fa57e42efa Deleted OpenPilot.posix branch. Integrated portability modifications into main tree
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1086 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-13 16:23:41 +00:00
vassilis
9f2a01a78a Flight/Servo Fix Servo driver buffer overflow, was messing up the I2C and altitude readings, now working fine. Servo index used to be 1-8 but the Servo driver was indexing a buffer out of bounds. Changed everything to use index 0-7 for servo outputs.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1061 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 01:54:43 +00:00
stac
a3a2dbd634 spi: Add support for hardware CRC generation/checking
PIOS SPI devices may now make use of automatic CRC generation
and checking on block transfers.  Only supports CRC8 for now.

Since the SPI interface CRC calculation continues across message
boundaries (ie. not reset on every transfer), we must manually reset
the CRC registers for every transfer to allow the two sides of the
link to resynchronize.

Unfortunately, resetting the CRC registers requires disabling the
SPI peripheral which must now be done on every block transfer.

Note: The last byte of the tx buffer is never sent and is assumed to
      be a place holder for the tx CRC8.
Note: The last byte of the rx buffer is expected to hold the rx CRC8.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1011 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:42 +00:00
stac
0e6294ca27 spi: remove internal pull-up from input data lines
The input data lines between the OP and AHRS boards had internal
pull-ups enabled.  This seemed to be causing issues early on
during development of the inter-board comms.  Not sure if this
is still necessary but this is how the current code was tested.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1006 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:26 +00:00
stac
3eceef43d3 spi: Connect device specific DMA IRQ handlers
Mark the device specific DMA IRQ handlers as strongly linked
aliases for the genericly named interrupt vector symbol.

Here's how this works...
 * The address of the symbol DMA1_Channel2_IRQHandler is written
   into the DMA1/Channel2 interrupt vector by the linker script.
 * The startup_*.S file specifies Default_Handler() as a weakly
   linked alias for DMA1_Channel2_IRQHandler.
 * We now override the weakly linked alias with the strongly linked
   PIOS_SPI_sdcard_irq_handler().
 * This results in the address of PIOS_SPI_sdcard_irq_handler() being
   written to the vector table for the DMA1/Channel2 interrupt.
 * The PIOS_SPI_sdcard_irq_handler() function is now called whenever
   the DMA1/Channel2 interrupt fires.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1003 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:13 +00:00
dankers
e47f755c30 Minini removed from OpenPilot
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@965 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-01 08:57:06 +00:00
FredericG
3bc938d45e lowered I2C timoout whne using RTOS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@842 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-21 09:19:02 +00:00
FredericG
fba5164634 Enable AUX UART with ENABLE_AUX_UART in Makefile
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@838 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 18:01:21 +00:00
FredericG
e5c795e42b Remapped UART_AUX from PA9/10 (RX inputs) to PB6/7 (Servo output)
Rationale: (http://forums.openpilot.org/topic/800-rev-761-mkserial-adapt-to-com-usartx-pios-com-x/page__view__findpost__p__2203_)
  

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@836 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 17:48:59 +00:00
FredericG
eac1d8a06b No need to include telemetry.h in openpilot.c
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@835 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 17:43:00 +00:00
fredericg
4e15413fc9 MkSerial, adapt to COM_USARTX => PIOS_COM_X
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@761 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 11:18:42 +00:00
stac
771a56ca9d com/usart: generalize com driver API
- Created a pluggable COM layer
- Converted COM + USART init into static initializers
  rather than typedefs
- Generalized the USB HID COM API to match the USART
  API.
- Changed USART and COM layers to be data driven rather
  than #ifdef'ing/switching on the specifics of each port

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@760 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:24:26 +00:00
stac
8d015a57d0 pios spi: support both master and slave configs
Added support for SPI slave configurations to the pios SPI layer.

Converted the board specific configuration for the PIOS SPI layer to
use const static initializers rather than #defines (see pios_board.c).

SPI interface between the OP board and the AHRS is now operational at
a basic level, capable of moving simple single byte messages between
boards.  Multi-byte, CRC protected messages will be added on top of this.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@759 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:23:44 +00:00
fredericg
2e6e2537f5 Fix: including of Example Module did not work any more
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@724 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-07 11:12:58 +00:00
FredericG
8a7eba0675 List of modules in Makefile - Automatic init of included modules
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@716 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-05 15:17:31 +00:00
stac
d678720855 i2c: i2c errors no longer mapped to event channel
Both EVents and ERrors were mistakenly being mapped to the
EVent IRQ channel.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@659 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-24 16:33:49 +00:00
stac
874239154a Turn on -Werror on openpilot firmware build
This commit fixes all existing warnings.

All basic compiler warnings will now be treated as errors.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@658 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-24 16:33:46 +00:00
stac
6b2760da1a USB HID: basic COM functionality over USB HID
This fixes the COM interface over USB HID to the point where
it can establish and maintain solid communications with the UAVObject
Browser in the GCS.

Tested only on Linux.  The USB HID interface is still disabled for now
until it is tested successfully by a wider group.

Edit telemetry.c and set ALLOW_HID_TELEMETRY to 1 to enable telemetry
over the USB HID interface and report your results in the forum.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@656 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-24 16:33:40 +00:00
stac
69de42db49 Add AHRS attitude module and driver skeletons
- New Attitude module for AHRS (skeleton)
 - New AttitudeSettings UAVobject
 - New AttitudeActual UAVobject
 - Regenerated UAVobjects
 - Added new UAVobjects to OpenPilot and GCS builds
 - New PiOS driver for OpenPilot AHRS (stubs only)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@655 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-24 16:33:36 +00:00
stac
cc6348934f bmp085: Add missing include for altitude module
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@653 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-24 16:33:29 +00:00
stac
d02a3325d9 altitude: Add altitude module which reads BMP085
This module reads from the BMP085 pressure sensor.  It periodically
updates the pressure (kPa) and temperature (C) as well as the
calculated altitude (m).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@640 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-19 04:55:56 +00:00
sambas
0e81831399 OP-25 Flight/GPS: port speed corrected for OPGPS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@638 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-18 11:42:57 +00:00
stac
514d46f5b6 freertos: fix RTOS API calls from interrupt level
FreeRTOS has a strict requirement that even interrupt-safe API calls (ie.
those ending in "FromISR") can only be called from ISRs that are at lesser
or equal priorities to configMAX_SYSCALL_INTERRUPT_PRIORITY.  See the
"configKERNEL_INTERRUPT_PRIORITY and configMAX_SYSCALL_INTERRUPT_PRIORITY"
section at:
  http://www.freertos.org/a00110.html

The interrupt numbers used on the Cortex-M3 CPU has a somewhat backward
representation of the interrupt numbers so 255 = lowest priority and
0 = highest priority.

The calculation is further complicated by the STM32 implementation only using
the upper 4 bits of the priority value.  Only 0x00, 0x10, 0x20, ..., 0xE0, 0xF0
represent useful interrupt priorities.

FreeRTOS requires that MAX_SYSCALL and KERNEL interrupt priorities are expressed
as raw unshifted 8-bit values to be programmed directly into the BASEPRI register.

The priority values passed to the NVIC initialization, however, are expected
to be 4-bit values and are shifted up by 4 within NVIC_Init() for you.

The end result is that we need this arrangement:

[highest priority]
   NVIC_0 (Non-maskable-interrupt)
   NVIC_1
   NVIC_2
[Must NOT call FreeRTOS APIs above here]
   configMAX_SYSCALL_INTERRUPT_PRIORITY (now at 48 = 0x30 = NVIC_3)
   PIOS_IRQ_PRIO_HIGHEST (cur. NVIC_4)
   PIOS_IRQ_PRIO_HIGH    (cur. NVIC_5)
   PIOS_IRQ_PRIO_MID     (cur. NVIC_8)
   PIOS_IRQ_PRIO_LOW     (cur. NVIC_12)
   configKERNEL_INTERRUPT_PRIORITY (240 = 0xF0 = NVIC_15)
[lowest priority]

The previous config had configMAX_SYSCALL_INTERRUPT_PRIORITY set at
191 (0xBF) which is effectively NVIC_11.  This was allowing all of
the MID, HIGH and HIGHEST interrupt handlers to preempt the OS in
its critical sections.  Since some of these ISRs were calling
FreeRTOS APIs, this would result in corrupting internal data structures
within the OS.

It should be ok to move the configKERNEL_INTERRUPT_PRIORITY to a higher
priority as long as it is less than configMAX_SYSCALL_INTERRUPT_PRIORITY.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@637 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-18 04:50:38 +00:00
vassilis
6b6740109e OP-32 Flight Initial release of Actuator (ServoOut) and ManualControl (ServoIn) modules, still work in progress (not fully tested).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@632 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-17 01:58:38 +00:00
sambas
66fa56a1da OP-22 Flight/PiOS: Spektrum simple decoder works, getting seven working channels with my DX7 tx
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@630 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-16 10:04:07 +00:00
sambas
76cd72915d OP-22 Flight/PiOS: first tests done with spektrum satellite, I can read binded receiver serial stream
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@629 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-16 08:35:38 +00:00
sambas
26aecf720d OP-22 Flight/PiOS: Spektrum satellite protocol started
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@626 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-15 18:22:03 +00:00
gussy
ff73ab5a80 More updates to cross-target compatibility.
Added PIOS_I2C into AHRS code.
Added PIOS_HMC5843 Module.




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@617 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-12 08:18:49 +00:00
gussy
8f3c2dbafb Changes to PiOS to be compatible with the AHRS.
Updates to AHRS code.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@615 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-11 13:36:13 +00:00
gussy
7544aab7fe Comment out testing task.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@595 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-05 17:24:39 +00:00
stac
42c4c9b343 Lower priority of HIDTest task
Commit @583 uncomments the HIDTest task creation.  HIDTest task is configured to run at
priority 4 (== tskIDLE_PRIORITY + 4) which is higher priority than the "System" task at
priority 3 (== tskIDLE_PRIORITY + 3).

The HIDTest task never blocks so it prevents the system task (and any other task of priority
less than 4) from ever running.

This commit does not fix the root problem of HIDTest never blocking, but rather lowers
its priority to be equal to the system task so that they share the CPU.  This is a
temporary workaround.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@586 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-05 03:19:47 +00:00
gussy
a574f56961 HID Loopback test now working. GCS code now needs to be brought up to speed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@583 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-04 19:56:06 +00:00
gussy
0aba12fe1f Loopback test of HID working. Still a WIP but committing what I have to show progress.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@582 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-04 18:54:43 +00:00
vassilis
99b67388bf Flight/UAVObjects Added support for default field values (used to initialize settings with defaults)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@558 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-28 01:54:24 +00:00
vassilis
8c11a03129 Flight/Alarms Implemented Alarms library, now checking for stack overflow, out of memory, event and other errors (see the SystemAlarms object). All modules will be reporting their alarms using this library.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@554 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-27 01:55:28 +00:00
vassilis
aaef72955e OP-4 Flight/Telemetry Make objectTransaction() fully reentrant
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@547 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-25 18:34:03 +00:00
vassilis
7b99c3d7f0 Flight/System Restructure start-up code, now all initialization in done after the RTOS is started
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@541 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-25 02:21:03 +00:00
vassilis
ecb83a52d3 OP-4 Flight/Telemetry Bug fixes and improved response when telemetry is fully loaded
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@539 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-24 04:05:39 +00:00
sambas
923ee3ccaf OP-25: gpsinfo removed, cleaned things up.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@522 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-18 07:37:55 +00:00
vassilis
40beb15129 OP-4 Flight/System Created CPU utilization measurement and created object to report system information (load, heap and time)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@519 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-18 02:13:59 +00:00
sambas
6c4cd936e5 OP-25: GPS Objects working. You need to raise configTOTAL_HEAP_SIZE in FreeRTOSConfig.h if all tasks enabled.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@514 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-17 08:49:19 +00:00
vassilis
bc472102b4 OP-4 Flight/Telemetry More bug fixes after testing telemetry
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@506 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-16 01:56:08 +00:00
vassilis
5889849060 OP-4 Flight/Telemetry Various bug fixes while testing telemetry (working but not fully tested)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@500 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-15 02:15:46 +00:00
sambas
402b4e8e24 Telemetry and HID work, ugly hacks atm. Endianess needs checking. HID transmit doesn't work at all. Serialport works both ways
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@472 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-10 16:22:08 +00:00
vassilis
f4c4b1371a Flight/Settings: Remove old settings implementation (replaced with binary settings as UAVObjects)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@465 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-10 01:35:13 +00:00
sambas
23aa2ea1cd OP-25: lat, lon and alt to float, lat and lon to desimal degrees format
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@435 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-07 08:02:44 +00:00
vassilis
e2871a24e7 Flight/UAVObjects: Test harness and bug fixes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@423 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-04 02:11:51 +00:00
pete
f1694527cc Working on the PPM functionality. Getting there but it is still not 100% correct.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@411 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-30 04:48:15 +00:00
sambas
066f42a2c5 OP-25: simplified gps structure
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@404 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-28 14:36:18 +00:00
sambas
9490bcdb93 OP-25: GPS tested and working, using TrimbleGPS 5Hz, 5 lat/lon desimals
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@386 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-25 19:36:52 +00:00
gussy
41fd921b14 Updated BMP085 test code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@375 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-23 04:01:11 +00:00
gussy
a03952fb5d Small updates and clean up.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@355 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-21 00:49:48 +00:00
pete
a3486477eb Added PPM defines and created pios_ppm.c
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@325 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-17 04:00:13 +00:00
gussy
057def91e2 Small updates, removed some unused code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@314 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-14 12:02:36 +00:00
gussy
f75fa5e567 Updated ADC to use the 3 auxillary inputs on the OpenPilot board.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@312 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-14 12:00:43 +00:00
FredericG
c932e131f0 OP-11 Moved PIOS_BMP085_Init() since the OS must be running before the first I2C transfer can be issued
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@305 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-14 09:42:38 +00:00
gussy
8ba2d76cd6 OP-21: Cleaning up a few things.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@302 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-13 20:46:46 +00:00
gussy
a0a92d5a59 OP-21: Made changes to OpenPilot makefile too allow building for bootloader and non-bootloader targets. Use "USE_BOOTLOADER = YES" to build for the OpenPilot Bootloader.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@300 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-13 20:01:31 +00:00
gussy
978e07419d Small FreeRTOS fixes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@294 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-13 06:44:15 +00:00
gussy
6764a34285 Updated some FreeRTOS specific issues and fixed a few typos.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@292 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-12 16:22:56 +00:00
fredericg
47038af0c0 PIOS_DONT_USE_XXX => PIOS_INCLUDE_XXX
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@283 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-11 12:38:51 +00:00
dankers
e66c491942 Update to headers in the flight portion of the code. Just formatting.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@276 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-10 09:12:31 +00:00
gussy
4f5d7ae83a PIOS_PWM now reading 8 channels properly!
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@269 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-08 10:09:30 +00:00
gussy
1ed841946c Added "supervisor" and comments to PIOS_PWM.
Added timer usage diagram to pios_board.h
Removed bloat for extra optimisation in PIOS_DELAY.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@265 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-07 14:19:43 +00:00
gussy
075dcf5aee PIOS_PWM example code measures servo signal pulse width in microseconds (uS).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@263 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-07 12:25:11 +00:00
gussy
c409a62978 PIOS_BMP085 module finished.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@262 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-06 16:04:31 +00:00
gussy
cafed0a148 BMP085 Sensor now working completely.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@261 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-06 14:20:42 +00:00
gussy
fd889b918b Updates to BMP085 readings.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@260 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-06 10:28:08 +00:00
gussy
0e8b618953 Updated files inside OpenPilot to use the single openpilot.h header file rather than multiple headers inside each file. This resolves a few build warnings/errors and makes the code cleaner.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@257 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-06 06:17:17 +00:00
gussy
53a64f8dba Improvement OP-3; Buffer based PIOS_COM tested and working.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@255 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-06 03:49:41 +00:00
gussy
d406232eb1 Improvement OP-3; Implemented buffer based receiving functions, untested.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@254 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-06 03:13:14 +00:00
gussy
6d67d2dab2 PIOS_ADC now non-application specific.
Removed "application hooks" system from PIOS_ADC.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@245 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-04 09:25:09 +00:00
gussy
09645920ee PIOS_COM and PIOS_USART now non-application specific.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@243 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-04 07:07:27 +00:00
gussy
798ad15bba More refactoring.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@235 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-04 05:51:11 +00:00
gussy
a5d56cd537 Small re-factorings.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@230 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-03 10:55:49 +00:00
gussy
47c5211cd4 Small changes to random files.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@227 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-03 07:53:15 +00:00
fredericg
1d7f1c5cd0 fixed warnings
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@219 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-01 10:17:16 +00:00
gussy
9953188fe2 PIOS_SYS now non-application specific.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@208 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 08:44:01 +00:00
gussy
792cfef50b PIOS_SPI now non-application specific.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@207 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 08:34:44 +00:00
gussy
fcf47bf1f6 PIOS_USART now non-application specific.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@206 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 08:29:14 +00:00
gussy
95d068884a PIOS_BMP085 now non-application specific.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@205 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 07:01:18 +00:00
gussy
22f02cb460 PIOS_I2C now non-application specific.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@204 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 06:57:59 +00:00
gussy
700116abd9 PIOS_LED now non-application specific.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@203 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 06:54:43 +00:00
gussy
adcd47a31b Added ability to enable and disable PiOS modules.
Added PIOS_USB_COM.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@202 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 06:47:49 +00:00