Corvus Corax
ea4ef46873
added airspeed module to taskinfo
2012-04-17 18:59:27 +02:00
Corvus Corax
edf26d15e6
Airspeed: some more fixes
2012-04-17 16:38:53 +02:00
Corvus Corax
c5a6ed7486
add missing headers and makefile entries
2012-04-17 16:25:39 +02:00
Corvus Corax
cf3f0b4226
Merge branch 'james/revolution' into stac/etasv3
2012-04-17 15:57:37 +02:00
Corvus Corax
5159d2029b
new airspeed module - still needs matching PIOS driver from stac
2012-04-17 15:54:05 +02:00
Stacey Sheldon
ad75e354eb
etasv3: Add etasv3 driver to revolution
2012-04-17 09:39:47 -04:00
Stacey Sheldon
6a37e433b6
etasv3: Add driver for Eagle Tree Airspeed Sensor v3
2012-04-17 09:39:00 -04:00
Stacey Sheldon
853600a2ef
i2c: enable flexiport i2c on revolution
2012-04-17 09:38:27 -04:00
James Cotton
b0ef456ccb
Kickstart MPU6000 if there is no data
2012-04-13 20:29:41 -05:00
James Cotton
a0d1b00ade
Cover an edge condition for the MPU6000 IRQ not firing
2012-04-13 19:37:30 -05:00
James Cotton
e82323af32
Make revolution work with the FreeRTOS queue based MPU6000 driver
2012-04-03 03:41:52 -05:00
James Cotton
bb41bc1472
Add no for DIAG_TASKS to make file to make it easier not to miss.
2012-04-03 02:07:04 -05:00
James Cotton
d7cb232315
Add MPU6000 accel range to config structure. Also put in correct values.
2012-04-03 02:07:04 -05:00
James Cotton
3346e848e0
Attitude error timeout was 2 ms when sensors at 500 Hz. Caused lots of errors
...
and overwhelmed event system.
2012-04-03 02:07:04 -05:00
James Cotton
3f22ef8c66
Slow MPU6000 on CC3D to 500 Hz
2012-04-03 02:07:04 -05:00
James Cotton
35854b35f6
MPU6000 accel value coming out twice as high as it should. Need to store scale
...
in cfg structure to fix this properly.
2012-04-03 02:07:04 -05:00
James Cotton
8032130769
Slow down gyro a bit on CC to give the CPU some breathing room. Might need to
...
come down more.
2012-04-03 02:07:03 -05:00
James Cotton
a960f3d07e
Switch the MPU6000 driver to using a FreeRTOS queue. Need to update Revo code
...
to take advantage of this.
2012-04-03 02:07:03 -05:00
James Cotton
1415728762
Get the MPU6000 CC3D working. Right now the ADC system is commented out, which
...
will break regular CC.
2012-04-03 02:07:03 -05:00
James Cotton
a0b7453580
Make the firmwareIAP variable not a global
2012-04-03 02:07:03 -05:00
Stacey Sheldon
9b33be5d65
ef: pad any gaps between the BL bank and the FW bank
...
The Entire Flash (EF) image for revo has a gap between
the end of the BL bank and the start of the FW bank.
This fills the gap with 0xFF and properly aligns the
FW image in flash.
2012-04-01 22:39:27 -04:00
Stacey Sheldon
eab923fee0
revo: move fw image into 128KB sectors
...
This saves the more versatile 16KB and 64KB sectors
for other purposes.
2012-03-28 21:52:43 -04:00
a*morale
8c77b01f9f
fixed indentation
2012-03-27 10:06:27 -05:00
a*morale
df9f3667d0
Added Mixer9/Mixer10 to mixerstatus.xml
2012-03-27 10:06:21 -05:00
Stacey Sheldon
f971fc14d5
openocd: update to latest git snapshot (f1c01333)
2012-03-27 00:53:27 -04:00
Stacey Sheldon
871ad80a46
openocd: clone entire git tree before checkout
...
Using --depth 1 in the git clone resulted in the
desired commit no longer being available in the
resulting clone.
2012-03-27 00:53:27 -04:00
Stacey Sheldon
91cffb1809
f4 usb: don't skip yield from ISR
...
Function was returning prior to the code that might
need to yield from within the ISR.
2012-03-27 00:18:44 -04:00
Stacey Sheldon
d299230db8
qt_sdk: upgrade to SDK v1.2 (QT v4.8.0)
...
Qt 4.8+ is now required to build the GCS.
This version of the SDK installer has dropped support
for the --installdir option so users will need to manually
specify the path for installation as:
<top>/tools/qtsdk-v1.2
in order for the Makefile to pick up this toolchain automatically.
This update drops support for Ubuntu 9.10 (Karmic) due to an
incompatibility with the glibc that ships with that release.
Support should still be possible with Ubuntu 10.04 (Lucid) and
newer.
2012-03-27 00:18:44 -04:00
Corvus Corax
0742c88a98
enabled optional rtation of Revolution board
2012-03-26 05:25:52 +02:00
Corvus Corax
d32dd0ccd4
Fixed fmod() versus fmodf() usage in flight/...
2012-03-26 04:16:54 +02:00
Stacey Sheldon
730defb698
f4 flash: fix flash voltage range setting in bl_helper
...
F4 boards are powered by 3.3V which corresponds to
VoltageRange_3. Fix this to match actual VDD so we
get faster erase/write times.
2012-03-22 22:37:31 -04:00
James Cotton
8059004755
Make sure if an event has a null handle and the queue is full we don't try and
...
query UAVObjID
2012-03-22 10:46:30 -05:00
James Cotton
c7ff2a46c7
Merge remote-tracking branch 'origin/laurent/modelview' into revolution
...
Conflicts:
flight/CopterControl/Makefile
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
2012-03-22 02:58:24 -05:00
James Cotton
6cb3abec80
Allow firmware compiled for 0x902 to be downloaded to 0x901
2012-03-22 00:42:23 -05:00
James Cotton
1eaf6f66fb
Rename one of the boxes in the runnindevicewidget.ui to avoid warnings.
2012-03-22 00:42:22 -05:00
James Cotton
2f8049e20a
Update the bootloader hw version for the mpu6000 board and make the sensor code
...
and initialization respond appropriately. Enable hte L3GD20 and BMA180.
Let the board type determine which is used.
2012-03-22 00:41:37 -05:00
James Cotton
e7ca02c038
Initialize mag before mpu6000. Seems more reliable but I don't know why.
2012-03-21 03:42:15 -05:00
James Cotton
e4290d678b
Reenable the pressure sensor and other modules
2012-03-21 00:49:29 -05:00
James Cotton
720684c248
Flag to enable pressure/mag
2012-03-21 00:49:04 -05:00
James Cotton
a77a859e5c
Using some config switches to get this board up and running
2012-03-21 00:48:31 -05:00
James Cotton
6b88a278b3
Disable overosync by default. It was triggering event system warnings due to
...
the extra updates from altholdsmoothed. Increase queue size when reenabled.
Also AltHold is is trigger warnings because other tasks starve it during
startup.
2012-03-21 00:29:09 -05:00
James Cotton
f4663b98e4
When the event system or object manager has an error store the object ID in the
...
SystemStats.
2012-03-20 23:18:07 -05:00
Laurent Ribon
299f9fd5d3
Comment the line "VERSION = 2.2.0"
2012-03-20 00:10:31 +01:00
Laurent Ribon
b36be73ffb
Add the possibility to set VBO usage when running.(No restart required)
...
Change Zoomm sensibility (made it more sensitive)
Remobe unecessary state variable :
- load Error
- init failed (An OpenGL init failed cause a Crash)
2012-03-19 20:41:28 +01:00
Laurent Ribon
081769fb7b
Make method setVboEnable not inline.
...
There is more stuf to do.
2012-03-19 20:38:21 +01:00
James Cotton
a319a6b14c
Flags to disable mag/baro init
2012-03-14 22:35:09 -05:00
Laurent Ribon
75d1f74090
Modify the modelview gadget widget in order to make it work with the
...
latest vesrion of GLC_lib and Qt4.8
2012-03-14 20:03:39 +01:00
Laurent Ribon
8e3dc0a4d8
Update ignoring file list (Eclipse project specific files)
2012-03-14 19:59:08 +01:00
Laurent Ribon
a636abef43
Activate Modelview plugin with QT4.8
2012-03-14 19:57:50 +01:00
Laurent Ribon
5eeafa227c
Replace GLC_lib OpenPilot version to the latest GLC_lib version.
2012-03-14 19:57:11 +01:00
