zedamota
4968df183a
Working compliant VCP+HID descriptors for Windows.
2012-04-20 08:38:24 -04:00
Brian Webb
62c5036220
Added PipXStatus and PipXSetting UAVobjects and some initial support for them.
2012-04-17 17:36:05 -07:00
Stacey Sheldon
62fb009acd
gpio: stop enabling pull-ups on all GPIOs in bootloader
...
The bootloader has been enabling pull-ups on all GPIO
pins during early init. These pull-ups are disabled
immediately before jumping to the firmware. This transition
results in all servos seeing a wide pulse as the board
resets making them jerk sideways aggresively and then snap
back to neutral.
2012-04-16 14:41:25 -04:00
Stacey Sheldon
5ca4ec7934
ppm: adjust min frame pulse width for 8ch x 18ms frames
...
All channels at max when using the FrSKY 4ch D4FR in PPM
mode results in the frame pulse shrinking well below our
threshold of 3800us and we lose frame.
With all 8 channels at max, the frame pulse becomes
indistinguishable from the other channels. Using all 8
channels with the FrSKY in PPM mode is NOT recommended
even after this change.
Recommend using at most 7 active channels in this mode so
we can still find the frame pulse.
2012-04-16 14:33:28 -04:00
Brian Webb
4936cd8fd2
Added PipXStatus and PipXSettings UAVObjects and added support the sending/receiving UAVTalk objects on the PipX.
2012-04-10 20:22:53 -07:00
Brian Webb
e639d173a0
Create ID from a hashed CPU serial number.
2012-04-07 19:41:23 -07:00
Brian Webb
7b49a6b820
Added watchdog to radio com bridge in PipXtreme.
2012-04-07 19:12:49 -07:00
Brian Webb
0f9f897870
Added PPM packet to packet handler, created replacement system module for PipXtreme (PipXtreme module), removed all UAVObjects from PipXtreme, and added parsing of incoming (over USB/COM) UAVTalk stream.
2012-04-07 18:17:32 -07:00
Brian Webb
56a2006fd8
Reconfigured to run on the real PipX board.
2012-04-06 18:44:31 -07:00
Brian Webb
eeb96955f9
Fixed ADC configuration
2012-04-06 17:43:43 -07:00
Brian Webb
bc1adb2519
Some cleanup of rfm22 driver.
2012-04-06 17:36:35 -07:00
Brian Webb
fff93910e2
RFM22B device now fully interrupt driven. Packet handeling moved to RadioComBridge module.
2012-04-05 20:24:50 -07:00
James Cotton
e82323af32
Make revolution work with the FreeRTOS queue based MPU6000 driver
2012-04-03 03:41:52 -05:00
James Cotton
d7cb232315
Add MPU6000 accel range to config structure. Also put in correct values.
2012-04-03 02:07:04 -05:00
James Cotton
35854b35f6
MPU6000 accel value coming out twice as high as it should. Need to store scale
...
in cfg structure to fix this properly.
2012-04-03 02:07:04 -05:00
James Cotton
a960f3d07e
Switch the MPU6000 driver to using a FreeRTOS queue. Need to update Revo code
...
to take advantage of this.
2012-04-03 02:07:03 -05:00
James Cotton
1415728762
Get the MPU6000 CC3D working. Right now the ADC system is commented out, which
...
will break regular CC.
2012-04-03 02:07:03 -05:00
Stacey Sheldon
eab923fee0
revo: move fw image into 128KB sectors
...
This saves the more versatile 16KB and 64KB sectors
for other purposes.
2012-03-28 21:52:43 -04:00
Stacey Sheldon
91cffb1809
f4 usb: don't skip yield from ISR
...
Function was returning prior to the code that might
need to yield from within the ISR.
2012-03-27 00:18:44 -04:00
Stacey Sheldon
730defb698
f4 flash: fix flash voltage range setting in bl_helper
...
F4 boards are powered by 3.3V which corresponds to
VoltageRange_3. Fix this to match actual VDD so we
get faster erase/write times.
2012-03-22 22:37:31 -04:00
James Cotton
c7ff2a46c7
Merge remote-tracking branch 'origin/laurent/modelview' into revolution
...
Conflicts:
flight/CopterControl/Makefile
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
2012-03-22 02:58:24 -05:00
Brian Webb
823b111d60
Added Reed-Solomon error correction to PipXtreme. The code is a slight modification of rsscode ( http://rscode.sourceforge.net ). Packet acking has also been turned on as the default, so each packet is error corrected, and if errors remain, the packet is NACKed, otherwise it is ACKed. Also temporarily turned off UAVTalk parsing. This was causing the CC to be identified as a PipX due to the PipX sending UAVObjects (I believe) from the system module. The system module is going to have to be modified/replaced for the PipX.
2012-03-18 17:43:29 -07:00
Brian Webb
ecdf150946
Moved RFM22B code from PipXtreme to pios_rfm22b.c driver. The radio is now passing data.
2012-03-18 10:22:05 -07:00
Brian Webb
78b622a8d8
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into PipXtreme
2012-03-15 19:31:18 -07:00
Brian Webb
b34b849453
Added start at a modified PipX packet handler.
2012-03-15 19:29:54 -07:00
James Cotton
bbbca319d8
Merge commit 'c4df0c0ceff8ba985bb20d815f27910b9e59d992' into revolution
2012-03-11 13:14:06 -05:00
Alessio Morale
c4df0c0cef
Support for port remapping on serial ports
...
Support for receiver configuration (PPM, PWM and DSM)
There are still problems with Flexi port (not sure if related to a problem with my board) and Uart/SBUS that has the input always inverted.
2012-03-11 18:38:49 +01:00
Stacey Sheldon
3782cdc58e
bu: drop CC and PipX from BU targets since they don't build
...
The CC and PipX bootloader updater (BU) builds don't currently
work due to some recent changes in how LEDs are handled.
Remove them from the default BU targets so that the all_flight
target can build clean again.
Also fix a linker warning in OP build.
2012-03-10 20:41:15 -05:00
Stacey Sheldon
3210bd3f9c
f4 usb_dcd: disable FIFO empty IRQ while waiting for tx completion
...
CPU was being hammered with FIFO empty IRQs if we queued data but
the host wasn't actively draining the FIFO.
This was entirely unexpected so this hack should probably be
removed once we can figure out why this was happening.
This is almost certainly hiding some other issue.
2012-03-07 20:36:37 -05:00
Stacey Sheldon
c4bd286739
f4 usb_hid: track whether we have buffers queued on endpoints
...
Make sure we don't clobber our endpoint configuration by
double configuring an Rx or Tx buffer against it. Wait for
the completion of the previous operation before allowing
endpoint configuration again.
2012-03-07 20:36:36 -05:00
Brian Webb
d73895de7d
Working PipX com relay.
2012-03-07 18:05:42 -07:00
Stacey Sheldon
65fc6104e6
f4 usb_hid: ignore upper layers if USB IF not yet enabled
...
Upper (COM) layer was calling down into the HID layer before
the HID interface had been enabled. This was leading to
interacting with the endpoint Rx and Tx FIFOs prior to init.
The FIFO config was then being clobbered when we the USB IF
was eventually enabled.
2012-03-07 20:01:35 -05:00
Stacey Sheldon
1f37806eab
f4 usb_hid: fix typo in EP IN registration call
...
Code was using the size of the Rx buffer instead of the Tx
buffer when registering. Buffers are currently the same
size so wasn't causing any issues.
2012-03-07 20:01:35 -05:00
Stacey Sheldon
bc3ee6209c
f4 usbhook: drop in/out bit from EP numbers before using as index
...
USBHOOK endpoint callback arrays should not be indexed with the
0x80 (in/out) bit set. Oops.
2012-03-07 20:01:35 -05:00
Stacey Sheldon
6832a62872
f4 bl_helper: clear all flash errors as we unlock the flash
...
Error flags being set were causing flash erase operations to
fail. Not sure why these flags were set though so this might
be hiding some other problem.
2012-03-07 19:53:18 -05:00
Stacey Sheldon
4ea1156e7b
f4 bl_helper: teach bl_helper about f4 flash sector map
2012-03-07 19:53:17 -05:00
Stacey Sheldon
d1d123e4f6
revo bl: turn on USB and add support for OP DFU protocol
2012-03-07 19:53:17 -05:00
Stacey Sheldon
c854c3f4a4
usbhook: add support in API for deactivating USB
2012-03-07 19:53:17 -05:00
Stacey Sheldon
cb9c3a9b7e
usbhook: delete dead code
...
Remove old code left-over from porting from F1 to F4.
2012-03-07 19:53:17 -05:00
Stacey Sheldon
fdf54ab86c
hid: fix response to HID descriptor
...
HID driver was incorrectly giving back the HID interface
descriptor when asked for the HID descriptor. This should
let OP boards interact better with generic HID layer drivers
and also gives us nicer output in lsusb once the HID descriptor
is read.
2012-03-07 19:52:54 -05:00
James Cotton
7961aba83c
Clean up a few more compiler warnings
...
Conflicts:
flight/PiOS/Common/pios_ms5611.c
2012-03-03 13:32:56 -06:00
James Cotton
bc8b72623e
Get rid of some unused variables
2012-03-03 11:54:09 -06:00
James Cotton
f20e5da9ed
Merge branch 'next' into revolution
...
Conflicts:
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configrevowidget.h
ground/openpilotgcs/src/plugins/scope/scopegadgetwidget.cpp
2012-03-03 11:41:41 -06:00
James Cotton
e3df261213
Merge branch 'stac/revo-usb' into revolution
...
Conflicts:
flight/Revolution/System/pios_board.c
2012-03-02 13:00:13 -06:00
James Cotton
72a93dbae5
Fix from PT for OSX/Windows F4 USB HID to send the full report size even if not
...
all used.
2012-03-02 11:11:36 -06:00
Brian Webb
a0bdc58e5b
Added framework for rfm22b com device.
2012-02-28 21:30:06 -07:00
Brian Webb
992aa3bec6
Updated PipX branch to use CDC device with a VCP (not working yet).
2012-02-25 09:07:37 -07:00
Brian Webb
01f314724b
Updates to USB configuration on the PipXtreme.
2012-02-24 15:54:26 -07:00
Brian Webb
483a96c31d
Some more cleanup to PipXtreme codebase.
2012-02-24 07:49:41 -07:00
Brian Webb
b69b285f58
Fixed PipXtreme bootloader.
2012-02-23 20:40:24 -07:00
Brian Webb
182f285e60
Added missing startup file for PipXtreme.
2012-02-23 20:06:34 -07:00
Brian Webb
cf34baec69
Some cleanup on PipXtreme codebase.
2012-02-23 19:58:23 -07:00
Brian Webb
f0dfba6fc0
Re-baslined the PipX codebase using the experimental Transmitter codebase.
2012-02-21 20:29:06 -07:00
James Cotton
d018d93e88
Clean up previous commit a bit and make the sampling rate a variable (and adapt
...
the sampling time accordingly).
2012-02-13 01:49:54 -06:00
James Cotton
3acbfbe96c
Convert the pressure sensor code to most of the calculations as int64 to retain
...
precision.
2012-02-13 01:22:48 -06:00
James Cotton
d8f0494e57
Merge branch 'revolution' into revolution_overo
2012-02-11 20:02:20 -06:00
Alessio Morale
22b211167c
Ported pios_iap.c to F4
...
restored failed boot count check on pios_board.c for revo
2012-02-11 13:49:32 +01:00
Stacey Sheldon
e2939dae2a
revo usb: Add support for USB to Revo
2012-02-07 02:25:31 -05:00
Stacey Sheldon
3c1b1001f9
f4 usb: Allow USB descriptors to be const through ST APIs
2012-02-07 02:25:31 -05:00
Stacey Sheldon
56102013aa
f4 usb: correct function prototypes in bsp template
...
This file is not actually used but it should still be accurate.
2012-02-07 02:25:31 -05:00
Stacey Sheldon
57f9f6e3d1
f4 usb: configure and build ST USB OTG and USB DEV libraries
2012-02-07 02:25:31 -05:00
Stacey Sheldon
1e79ed6d54
f4 usb: fix invalid reference to stm32f4_discovery.h
2012-02-07 02:25:31 -05:00
Stacey Sheldon
04b81f13a7
f4 usb: fix invalid references to stm32f2xx.h
2012-02-07 02:25:31 -05:00
Stacey Sheldon
266b95561f
f4 usb: rename device template to real config file
2012-02-07 02:25:30 -05:00
Stacey Sheldon
a4ae844f2b
f4 usb: rename otg template to real config file
2012-02-07 02:25:30 -05:00
Stacey Sheldon
58bbe0870d
f4 usb: allow device->host data to be const
...
This allows the application code to pass const
descriptors to the Tx APIs in the STM32 USB
library.
2012-02-07 02:25:30 -05:00
Stacey Sheldon
4b911bb3be
f4 usb: remove unused device class examples
2012-02-07 02:25:30 -05:00
Stacey Sheldon
efbe8bbfdd
f4 usb: convert all line endings to LF-only
...
Line ending changes only. No functional changes.
2012-02-07 02:25:30 -05:00
Stacey Sheldon
6a43d1c7ed
f4 usb: Import pristine STM32F4 USB Library v1.1.0
...
Taken from version STM32F4-Discovery_FW_V1.1.0 of the
library from ST.
2012-02-07 02:25:30 -05:00
Brian Webb
3f66afd74a
Removed emacs mode header from pios_gcsrcvr.c
2012-02-04 08:42:16 -07:00
Stacey Sheldon
4fafbb13ed
makefile: Add EF (Entire Flash) targets for all boards
...
These new build targets will construct a flash image that
includes both a bootloader as well as a firmware image all
in one. Examples:
make ef_coptercontrol
make ef_revolution
This also adds support for a new target for writing this EF
image to boards that support a DFU interface (only F4-based
boards). This can be done by running:
make dfuutil_install
# Boot board with SBL asserted to activate STM32 DFU ROM
# Attach USB cable
make ef_revolution_dfu
Bootloader images are also now padded out to occupy the full
BL flash region.
2012-02-03 00:59:36 -05:00
Brian Webb
a314604f9b
Added failsafe to GCS Receiver device.
2012-02-02 19:59:42 -07:00
James Cotton
18a64e261f
Going a bit overkill with this - deinit who SPI block between transactions.
2012-02-02 12:32:57 -06:00
James Cotton
03cfb1453a
DeInit SPI DMA between transactions. Somehow if this doesn't happen the next
...
transaction doesn't start at the beginning again. Something is still not quite
right because first few bytes aren't getting across. Need logic analyzer.
2012-02-02 11:37:35 -06:00
James Cotton
77a6abb341
For PIOS_SPI F4 do not enable the TX irq. Also do not wait for the
...
transmission to finish either.
2012-02-02 11:24:14 -06:00
James Cotton
0a71a48c57
Sending all FF finally again
2012-02-02 10:36:09 -06:00
James Cotton
29237f97ae
For SPI slave devices we need to handle the interrupt differently since
...
transactions should already be completed. Also reset the callback so in the
case of noise on the IRQ line it will not keep firing interrupts.
I suspect we should probably disable interrupts in this handler to prevent
refiring.
2012-02-02 10:13:09 -06:00
Alessio Morale
5449408763
Merge branch 'amorale/timerprescaler' into inoutch8
2012-02-01 00:23:53 +01:00
Alessio Morale
820e8ac062
Handle different prescaler values for timers on APB1 and APB2.
...
The PIOS_MASTER_CLOCK has been removed in favor of
PIOS_SYSCLK (the master clock value,168000000 for revolution)
PIOS_PERIPHERAL_APB1_CLOCK and
PIOS_PERIPHERAL_APB2_CLOCK
Look at STM32F4xx_Revolution.h for the list of timer/peripheral and APB them belongs.
2012-01-28 20:04:55 +01:00
James Cotton
13447ac907
Fix the MPU6000 implementation
2012-01-28 00:21:58 -06:00
James Cotton
f311700804
Flashfs: Whenever failing out of a transaction unlock the semaphore
2012-01-26 14:14:50 -06:00
James Cotton
85bfa7dcf9
Flashfs: Missed calculation of the header crc for monolitihic write
2012-01-26 13:32:53 -06:00
James Cotton
ad3d470f40
Flashfs and Flash: Add new function to write a series of blocks in one flash
...
write transaction to improve efficieny.
2012-01-26 12:39:35 -06:00
James Cotton
80705cdba1
Flash: Because on CC/CC3D the flash is initialized before FreeRTOS is started
...
we cannot use the transaction lock or the delay while saving.
2012-01-26 11:50:05 -06:00
James Cotton
4fc907ad0d
Add a transaction semaphore to flash and flashfs to make sure multiple saves
...
or loads can't be attempted between threads
2012-01-26 11:36:07 -06:00
James Cotton
8b15fdd88b
Flash: Add a vTaskDelay when waiting for flash operations to complete to
...
prevent blocking the bus from accels
2012-01-26 11:26:19 -06:00
James Cotton
e69a0937bc
Flash: Wrote status instead of read it
2012-01-26 11:17:00 -06:00
James Cotton
69dc5abf0c
Flash: Get rid of some defines and directly reference the cfg structure
2012-01-26 10:56:26 -06:00
James Cotton
6d572986e5
Flashfs: Clean up some of the JEDEC commands and also format whole chip when FS
...
is wrong.
2012-01-26 10:04:49 -06:00
James Cotton
fe7b9a909a
LED: Update the LEDs on revo
2012-01-26 09:11:27 -06:00
James Cotton
20670d049b
Update pios_led for F4 targets to match the new F1 implementation. Also fix
...
type for F1 in GPIO labels.
2012-01-25 22:50:19 -06:00
James Cotton
205aabe895
L3GD20: Make this sensor push data onto a FreeRTOS queue so that the sensor
...
reading task can block according. Also now the gyro data is sent to
stabilization multiple times per update of the attitude loop.
2012-01-25 01:20:07 -06:00
James Cotton
0da20bb846
Flash: Because most of the commands are a JEDEC standard rename this file
...
pios_flash_jedec and abstract out the methods that can vary between chips.
2012-01-25 00:23:24 -06:00
James Cotton
a02cad6f52
Flashfs: Separate out the sector sizes and magic values into a runtime
...
configurable structure. This makes it easier to deal with different chip
layouts.
2012-01-24 23:56:59 -06:00
James Cotton
5ad37e691c
USB: Update the USB configuration structure to include the GPIO that is used
...
for sensing and then load different config for CC and CC3D. Updated the
bootloader as well. Also changed the PIOS_USB_CheckAvailability function to
only return the sense signal and not the transfer_possible flag as this is not
set in time for the bootloader on CC3D for some reason.
2012-01-24 22:15:43 -06:00
James Cotton
bc3703ce33
Need more irq stack for CC3D
2012-01-24 19:48:52 -06:00
James Cotton
104c091590
Correct the range constants for the L3GD20 driver
2012-01-24 19:48:14 -06:00
James Cotton
a25d52785b
Change the bus speed for the L3GD20 to 10MHz and some small cleanups
2012-01-24 19:17:49 -06:00
James Cotton
587ec5a615
Revert earlier patch on filesystem for Revolution. Need to make erase command
...
and positioning of filesystem dependent on board type.
Reverted 99123372d0
2012-01-24 16:14:41 -06:00
James Cotton
c9263cb8c0
L3GD20: Dynamically allocate buffer structure when used
2012-01-24 15:51:38 -06:00