James Cotton
93b77becc0
More the system task priority down and increase the timeout for erasing the
...
flash so it says completed. However, it still blocks the system for a long
time. During an erase the heartbeat will flash at 10 Hz to indicate what's
happening.
This still blocks telemetry even after lowering hte system priority (and there
is a vTaskDelay) which makes me think that the SPI bus being locked is blocking
Sensors or somethign else. This should not be permited when the system is
armed.
The reason the system locks up during the erase is that the file system
operations occur within the event dispatcher thread. It is very bad practice
for anything to block this (i.e. callbacks should never take very long). We
should probably move the object persistence handling into the system thread or
something but that can be a separate issue.
2012-06-11 12:03:32 -05:00
James Cotton
7b8110a457
Merge branch 'MikeL' into next
2012-06-07 11:31:41 -05:00
Brian Webb
861bcc46fe
Fixed RSSI reporting on PipX.
2012-06-06 21:14:31 -07:00
Brian Webb
e9d0909a68
Further improvements in link reliability on the PipX.
2012-06-06 17:44:56 -07:00
James Cotton
5e01617cbd
Merge branch 'next' into MikeL
...
Conflicts:
ground/openpilotgcs/src/plugins/config/airframe.ui
ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
ground/openpilotgcs/src/plugins/config/configoutputwidget.h
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.h
2012-06-06 11:58:06 -05:00
Brian Webb
5876df250d
Improved lockups on dropped packets.
2012-06-05 21:10:32 -07:00
Brian Webb
0bc3c5061f
Fixed PipX connection status reporting.
2012-06-05 19:34:19 -07:00
Brian Webb
4e68f6543e
Added tracking of dropped packets to PipX and turned off visible text on signal strength meters.
2012-06-04 21:18:13 -07:00
Brian Webb
25fe50e9b1
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-06-04 18:26:05 -07:00
Mike LaBranche
0ba8345c51
Merge branch 'next' into MikeL
...
Conflicts:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_iap.c
flight/Revolution/System/inc/pios_config.h
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 16:59:31 -07:00
Mike LaBranche
bf591ebe45
Merge branch 'next' into MikeL
...
Conflicts:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_iap.c
flight/Revolution/System/inc/pios_config.h
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 15:38:57 -07:00
James Cotton
ff0a3a156e
Merge remote-tracking branch 'origin/os/AeroSimRC' into next
2012-06-04 12:25:59 -05:00
James Cotton
46a52fc5ce
Apply the virtual flybar stick scaling in stabilization.c because we need to
...
know the true stick position to dampen the gyros appropriately.
2012-06-04 12:22:39 -05:00
James Cotton
bda3f301cb
Rename VBar mode to VirtualBar
2012-06-04 12:22:39 -05:00
James Cotton
4c562b88d1
Make the amount to suppress the gyros adjustable instead of binary
2012-06-04 12:22:39 -05:00
James Cotton
59972d5570
Limit the number of degrees the vbar can deflect. This is good for fast flips
...
etc.
2012-06-04 12:22:39 -05:00
James Cotton
42ac4018b8
Woops. Fix really nasty bug in vbar mode I introduced. Also fix small bug in
...
scoping of gyro gain that made it not work.
2012-06-04 12:22:39 -05:00
James Cotton
6719ee8639
Add piro compensation option to the vbar mode
2012-06-04 12:22:39 -05:00
James Cotton
3283b99d4e
For hardcode flipping allow full stick to completely override the gyro
...
feedback.
2012-06-04 12:22:39 -05:00
James Cotton
fe978504bc
Add friendly settings for the vbar mode including the VbarTau which acts like
...
the time constant.
2012-06-04 12:22:39 -05:00
James Cotton
ff1b1a93cf
Implement a virtual flybar in a way inspired by behavior of Align 3G which
...
seems apply a leaky integrator to the swash angle. This is the similar to what
is done by Phubar (http://code.google.com/p/phubar/ ) as well although we refer
to the gyro term as the proportional and the flybar angle as the integral
2012-06-04 12:22:38 -05:00
James Cotton
1b55df733d
Create virtual flybar setting for stabilization modes
2012-06-04 12:22:38 -05:00
James Cotton
e341a37bd1
Need to add a small delay after save for the load to work correctly. Odd.
2012-06-03 17:26:10 -05:00
Brian Webb
36f62be3b9
Fixed packet error detection and improved RSSI reading.
2012-06-03 10:07:08 -07:00
James Cotton
e8cf606f16
Add the chip size to the flashfs configuration (should probably go in the chip
...
configuration)
2012-06-02 11:00:42 -05:00
James Cotton
25f85ee4fe
Add an error flag to ObjectPersistence and when saving a setting make it verify
...
that the data reads successfully.
2012-06-02 10:23:27 -05:00
Brian Webb
df8a5f8f27
Changed update period for PPM inputs on the PipX. Fixed LED code.
2012-05-31 18:56:07 -07:00
Brian Webb
7287e2f725
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-29 18:14:20 -07:00
Oleg Semyonov
b93674cf64
uavtalk: fix object access mode comments to be correct
2012-05-29 11:57:31 +03:00
Brian Webb
9a6fb60dd6
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-28 20:18:59 -07:00
Oleg Semyonov
5739dfbfc8
Merge remote-tracking branch 'origin/next' into os/aerosimrc
...
Conflicts:
shared/uavobjectdefinition/gcsreceiver.xml
2012-05-28 21:46:43 +03:00
Oleg Semyonov
910b465ac6
AeroSimRC: do not update sensor and/or attitude data if read-only flag is set
2012-05-28 19:44:34 +03:00
Oleg Semyonov
f95d29a3b8
TxPID: add GyroTau to the list of parameters (OP-637)
2012-05-28 12:48:55 +03:00
James Cotton
5a6e02a688
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into next
2012-05-25 20:37:23 -05:00
Brian Webb
b824c87056
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-25 06:26:29 -07:00
Brian Webb
701a480f01
Tuning configutation of PipX.
2012-05-24 18:08:29 -07:00
Brian Webb
f48bb90cf6
Updated PipX bootloader USB configuration to match CC.
2012-05-24 18:06:19 -07:00
Brian Webb
a434688b42
Zero out watchdog register on init.
2012-05-24 18:04:42 -07:00
Stacey Sheldon
ac75dd7be1
Revert "bu: remove LED support from bootloader updaters"
...
This reverts commit 7f03a77492
2012-05-23 00:46:19 -04:00
Stacey Sheldon
400e529703
bu: add back LED feedback
...
LED support was dropped from the BU images due to a lack
of proper abstraction for LED definitions between CC and
CC3D HW variants in the CopterControl board family.
Use the new LED abstraction to hide board revision details
from the BU image so it can once again flash some LEDs.
2012-05-23 00:31:08 -04:00
Stacey Sheldon
56dddee56c
cc: use defines for board revisions instead of hard-coded numbers
2012-05-23 00:29:12 -04:00
Stacey Sheldon
d2615cac96
hw_defs: hide board-rev differences in LED definitions
...
Every board has at least one LED (HEARTBEAT). Not all
users of LEDs need to be directly aware of which LED
configuration to choose when there may be more than one
possible configuration.
Hide the details of the differences between LEDs used in the
different HW revs for CC. This will allow generic code to
run on CC and CC3D without being exposed to the details of
the different pins used for the LEDs.
2012-05-23 00:22:11 -04:00
Stacey Sheldon
b97aba834a
cc3d leds: move pin remapping into led definition
...
The LED driver supports GPIO remapping. No need to
do the remapping outside of the LED definition.
2012-05-23 00:12:51 -04:00
Stacey Sheldon
dff43d5156
board_info: add guard for multiple includes of .h file
2012-05-22 21:50:53 -04:00
Corvus Corax
64c1ac3bd6
Stabilization: Bugfix: moved queue initialisation to TaskStart where it belongs
2012-05-22 22:19:31 +02:00
Corvus Corax
7f334a9773
SimPosix: make use of compile time uavobjecto initialization function generation
2012-05-22 22:06:26 +02:00
Corvus Corax
31da29a24b
Reenabled full UAVObject initialization for SimPosix
2012-05-22 21:22:59 +02:00
Corvus Corax
3e5741abea
SimPosix: Remove unneeded modules from Makefile to allow test run
2012-05-22 18:45:23 +02:00
Corvus Corax
9aca773714
SimPosix: Reenabled File IO for UAVObject saving
2012-05-22 18:32:52 +02:00
Corvus Corax
0d23e78762
PiOS.posix: added missing header definition to use FreeRTOS tasks in udp driver if applicable
2012-05-22 18:32:47 +02:00
