1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-05 13:24:11 +01:00
Commit Graph

304 Commits

Author SHA1 Message Date
Oleg Semyonov
aeda61d252 usart: serial telemetry can be disabled to free USART
It was tested being merged with OP-472_CorvusCorax_CopterControl-Guidance_v3
branch, Spektrum on USART3 and GPS on USART1 and seems to work.

Currently defaults mimic original behavior, that is, if USE_SPEKTRUM
is not defined - define USE_PWM and USE_GPS. Thsi should be refactored
later to make it configurable from the Makefile.

Also it was not ported to the OP MB: it currently does not support the
S.Bus hardware and still has original behavior with the patch. But this
is one more step to dynamic configuration of ports.
2011-06-16 15:06:01 +03:00
Oleg Semyonov
d8201ec45b sbus: provide a stub based on Spektrum driver (for CC only) 2011-06-15 22:35:21 +03:00
James Cotton
0f5fe54329 FlashFS: Should clear the 0 sector when wiping flash chip, not 10 bytes in. 2011-06-11 22:31:51 -05:00
James Cotton
0a56129b35 OP-452: Made the CRC calculation run in chunks to balance efficiency and ram
usage, because Stac caught me being lazy :)
2011-06-05 09:05:59 -05:00
James Cotton
599483d5ac OP-152: Save CRC for object and header into flash and only load object if CRC
matches.  Read the flash first bytewise to compute CRC instead of buffering
which is more RAM efficient but very inefficient as it sets up many one byte
SPI transfers.

Also incremented the filesystem magic flag to trigger an automatic flash wipe
on this upgrade.
2011-06-04 18:36:38 -05:00
James Cotton
3e5d02cbaf OP-152: Abstract the CRC code out of uavtalk to allow it to be reused (PT -
feel free to test moving this to the hardware CRC unit)
2011-06-04 18:36:26 -05:00
James Cotton
524cdf7743 OP-378: Start of IMU3000 fifo reading code 2011-05-31 01:51:05 -05:00
James Cotton
b6a8293f69 OP-378: Get BMA180 interrupt working. Data gets pushed onto a fifo that is
pulled from in the INS code.
2011-05-30 03:40:51 -05:00
James Cotton
9ede84680e OP-378: Start working on IRQ driven BMA180 reading and also fixed the mag order 2011-05-26 13:57:41 -05:00
James Cotton
0a60c5b57c Merge branch 'master' into OP-378_James_INS 2011-05-26 12:19:30 -05:00
James Cotton
74b9c58f39 Make sensors return data as int16 array instead of struct 2011-05-26 02:49:25 -05:00
James Cotton
20775e806c Merge branch 'OP-378_James_INS' of ssh://git.openpilot.org/OpenPilot into OP-378_James_INS 2011-05-25 22:19:31 -05:00
Stacey Sheldon
8bd08e381a build: add support for EE bank on pipx boards
The pipxtreme boards use a sector of the on-board flash
for configuration storage.  Adjust the memory maps to
reflect this.

The board_info_blob is also extended to include the EE
bank definitions.  This should be used by the pipxtreme
firmware rather than determining it based on chip size.
2011-05-24 01:10:40 -04:00
Stacey Sheldon
9973fda23b build: define bootloader and firmware bank spans
The board-info.mk files now define the start and size
of the bootloader and the firmware banks.
2011-05-24 01:03:01 -04:00
Stacey Sheldon
96827eecff build: Make all flight sw use pios_board_info_blob
Now that every bootloader build has a board info blob,
make all fw and bl images use it.

The following MACROS are removed:
  BOARD_TYPE, BOARD_REVISION, BOOTLOADER_VERSION,
  START_OF_USER_CODE, HW_TYPE

These values are now ONLY available from the bootloader
flash via the pios_board_info_blob symbol.  These values
must not be #defined or otherwise hard-coded into the
firmware in any way.  The bootloader flash is the only
valid source for this information.

NOTE: To ensure that we have an upgrade path from an
      old bootloader (without board_info_blob) to a
      new bootloader (with board_info_blob), it is
      essential that the bu_* targets do not depend
      on (or validate) the board_info_blob being present
      in the bootloader flash.
2011-05-24 00:58:10 -04:00
David Carlson
38d416cf92 Fix Y/Z axis mixup in self-test procedure (currently not used) 2011-05-23 20:53:15 -07:00
James Cotton
50161b4ad8 OP-378: Continue updating BMA180 sensor driver. 2011-05-20 16:38:53 -05:00
James Cotton
5d78a68bee OP-378: Got BMA180 working. 2011-05-19 11:36:43 -05:00
James Cotton
3093d26cf4 OP-378: Update BMP085 driver for convention that 0 is success, < 0 is failure 2011-05-19 11:36:32 -05:00
James Cotton
750097ea73 OP-378: Small changes to get drivers working again. Fix I2C port for IMU3000
and change convention so that 0 is success, < 0 is error.
2011-05-18 23:35:45 -05:00
James Cotton
81b7fb6185 Merge branch 'master' into OP-378_James_INS 2011-05-18 12:50:29 -05:00
Stacey Sheldon
575010169a build: add pios_board_info_blob struct to bootloader flash image
The board info blob is stored in the last 128 bytes of the
bootloader's flash bank.  You can access this data from the
application firmware like this:
  #include <pios_board_info.h>

  if (pios_board_info_blob.magic == PIOS_BOARD_INFO_BLOB_MAGIC) {
    /* Check some other fields */
  }

DO NOT link pios_board_info.c into your application firmware.
Only bootloaders should provide the content for the board info
structure.  The application firmware is only a user of the data.
2011-05-16 08:30:30 -04:00
James Cotton
feb9c02780 OP-216: Small typo in flashfs code (thanks Zippe) 2011-05-15 00:18:15 -05:00
James Cotton
d312e876c4 OP-216: Some small bugs where things were stored 2011-05-14 16:11:30 -05:00
James Cotton
c689d97961 OP-216: Improved error handling 2011-05-14 14:28:11 -05:00
James Cotton
0438f5cf66 OP-216: Check for existence of file table in flash and wipe sector and create
it if missing.
2011-05-14 14:23:23 -05:00
James Cotton
7e6e7bb391 OP-499 OP-216: Simple list of objects saved in flash to prevent objId
collision.  Note, this will wipe ALL your settings.
2011-05-14 14:05:02 -05:00
sambas
d61f3d4d94 Merge branch 'OP-378_CheBuzz_INS' of ssh://git.openpilot.org/OpenPilot into OP-378_CheBuzz_INS 2011-05-07 18:26:12 +03:00
Corvus Corax
5d952f81e3 PIOS: BL_HELPER: refactored function names 2011-04-23 21:11:17 +02:00
Corvus Corax
150464344d BL_HELPER: call CRC_Ini() from within CRC check function 2011-04-23 20:55:21 +02:00
Corvus Corax
357bc369db PIOS: Bootloader Helper functions should sit in HAL, not duplicated in every single architecture. 2011-04-23 19:40:41 +02:00
David Buzz Carlson
876ca3044c Added EKF code. Most of this was bulk copy and paste from the AHRS, so a lot of verification needs to take place. Grabbing sensor data remains untested. 2011-04-20 03:37:50 -07:00
chebuzz
06443b4281 OP-378 - OP/INS - Add initial support for INS. HMC5883, BMP085, BMA180, IMU300 all added. Throrough verification has not been done on any of them. main() simply calls self-test functions on all of the hardware.
AHRS_comms still needs to be implemented.  INS/GPS functionality still needs to be implemented.  Double-check of the new drivers still needs to be done.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3162 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-14 12:46:39 +00:00
chebuzz
195e93c0d6 OP-377 PiOS/BMP085 - Update BMP085 driver to be FreeRTOS agnostic. This is required since new INS does not run FreeRTOS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3160 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-14 09:46:23 +00:00
stac
bbb3882826 bl_openpilot: bind to new COM, USART and SPI drivers
- Removed all unnecessary device instances and their cfg's.
  - SPI to SD card
  - I2C
  - Aux USART
- Moved SPI baudrate setting into cfg rather than init func.
- Abstracted forcing slave select under OPAHRS API.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2786 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-14 01:17:32 +00:00
stac
3fda65c5d3 hwinit: Convert SPI drivers to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2772 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:50 +00:00
stac
841b0d3d6d hwinit: Convert COM and USART to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2771 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:43 +00:00
peabody124
97acaa2402 CC-15 Gets settings saved to flash chip on CC using crude sector based storage.
Sector based on Object ID so could overlap :-(.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2662 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:12 +00:00
peabody124
ea91042f38 CC-6 Fixed bug in flash read write addresses
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2661 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:08 +00:00
peabody124
e27c9c0b7a CC-6 Rename Flash function to not be all upper case consistent with other PIOS
functions

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2660 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:04 +00:00
peabody124
037a63ee1d CC-1 CC-8 Cache the oversampled gyro value and use that to get rid of glitches.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2652 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:27 +00:00
sambas
ba5ebb6b13 OP-303 PIOS/Sonar: preliminary support for HCSR04 ultrasound altimeter module, tested and working :)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2610 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 19:21:22 +00:00
peabody124
c759253b77 CC-6 Flash chip working to read ID. Also tweaked how the semaphore for the SPI
bus is used to be a bit safer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2591 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-25 17:46:27 +00:00
peabody124
00a3e82c70 CC-6 PIOS/SPI: Add semaphore to SPI device structure that can be used to ensure
only one CS line is asserted.  No checks are enforced on this by the SPI code
as I cant see a clean way of it being aware of the CS lines.  We could add
another CS mode those which is driver managed per transfer and has a GPIO i
line for each device.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2579 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:17 +00:00
peabody124
d2f3e0d379 CC-6 Initial code for the flash chip on CC
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2578 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:14 +00:00
peabody124
d4b4a6ca37 CC-3 Modules/CCAttitude: Add oversamplign to the accel data
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2576 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:08 +00:00
peabody124
cf17569de7 CC-1 Modules/CCAtttitude: Calling the ADXL345 library and getting the accel and
gyro data into attitude raw.  Hardcoded calibration for now.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2474 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 08:45:40 +00:00
peabody124
940792db5c OP-265 CopterControl: Fork main OpenPilot directory
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2416 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:24 +00:00
peabody124
b173d74821 OP-237 I2C ESC support. This _will_ require you to reconfigure your
ActuatorSettings although for PWM aircrafts it should be done exactly as before

Actuator: Store the update times and maximum update time

OP-14 I2C: Start tracking short history of events and states in driver for
logging
OP-237 Flight/Actuator: Support for I2C based ESCs

OP-237 MK_ESC: Send all four motors as one atomic transfer

OP-237 Flight/Actuator: Allow channels to be mapped to MK I2C interface.  Currently
mixer channels are either PWM or MK but in the future this will change to
support more than 8 channels.

OP-16 PiOS/I2C: Further work to try and make I2C more stable, mstly special case
handline in IRQ

OP-237 I2C ESC: Support for Astect 4 channel ESCs

OP-237: When the I2C Actuator write update fails track this

OP-237 Actuator Settings: Change the way motor types are selected to keep that
information more appropriately within ActuatorSettings instead of MixerSettings

Also make motors stay at or above neutral when armed and throttle > 0

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2366 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-10 01:11:44 +00:00
zedamota
14ef24a3de OP-21/Bootloader - Maximize flash space available for user code. Bring back delay on HID send (board->pc) it still hangs when blasted with data. AHRS is now Readable.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2263 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-21 17:25:24 +00:00
zedamota
c034a35d2c OP-21/Bootloader - Changes to the IAPObject. Implements MB and AHRS user mode IAPObject. Added user mode reset command to the CLI. To many changes to bootloading system to write here, a Wiki page will have to be writen.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2238 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-15 19:06:28 +00:00
zedamota
d57441e8f4 OP-21/Bootloader - forgot to commit this too..sorry (check last commit)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2137 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-21 22:58:14 +00:00
kokomojoe
20c6e2292a OP-185 Flight helper functions for the firmware IAP object. Allows setting/clearing of back-up registers
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1890 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 02:02:37 +00:00
peabody124
3c021c09d9 Flight/PiOS: Whitespace changes
find ./flight/PiOS/inc/ \! \( -name '*~' -a -prune \) -type f    | xargs -I{}
bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss -ncs -cp1
-il0 -hnl -l150 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1777 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 07:28:45 +00:00
peabody124
a01783b2a8 OP-140 AHRS: Explicilty deal with if it is initialized or not, use that to
determine retransmitting calibration, home location and such.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1755 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 21:05:38 +00:00
zedamota
87dc0908ce OP-21/Flight Bootloader - Bug fix
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1695 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-20 16:29:34 +00:00
zedamota
3ba6372dc4 OP-21/Flight Bootloader - Clean up and linker files for the AHRS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1691 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-19 18:27:53 +00:00
zedamota
c9752a6a3a OP-21/Flight Bootloader - some changes for the bootloader to work
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1682 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-18 23:11:42 +00:00
peabody124
8e0c5136c0 AHRS/Comms: Make the polling delay 1ms instead of 20ms to make sure if a message isn't ready we don't pause for a long time.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1673 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-17 18:12:25 +00:00
zedamota
f972b78bfb OP-21/Flight Bootloader
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1641 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:07:43 +00:00
pip
89fb0b8582 Made pios_hmc5843_data_ready volatile (accessed by both interrupts and main exec loop).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1638 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:00:36 +00:00
stac
55d90970ed hmc5843: hide internal #defines and functions
Way too much was being exposed in the API for the
HMC5843.  This commit properly hides internal
details of the driver.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1629 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:21:04 +00:00
stac
0e7a801e9e hmc5843: Add support for DRDY signal from magnetometer
The DRDY signal from the magnetometer is connected to PB8
on the STM32.  This pin is now configured as an external
interrupt and is now used to signal when new data is
available from the magnetometer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1628 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:21:02 +00:00
stac
4ac001553d hmc5843: convert line endings from CRLF to LF
No functional changes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1627 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:21:00 +00:00
stac
88e73906d0 i2c: Add recovery code for i2c bus errors
I2C bus errors are now recoverable.  The bus is properly reset
and an error indication is now provided to the caller whenever
a bus error occurs during processing of the transaction list.

For now, the users of the I2C layer just retry infinitely on
failure.  The BMP085 and HMC5843 code should be changed to
report errors to its callers to allow a more sensible retry
strategy.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1625 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:57 +00:00
stac
65ad2caf8a i2c: Make transaction initiator available in txn list
The info field in the pios_i2c_txn list can now be used
to provide a const string which describes the context
for this transaction.

This is very helpful when diagnosing an error that occurs
somewhere in the middle of the I2C FSM since the FSM runs
primarily in the ISR where the original context for the
transactions is no longer available in the traceback.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1622 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:53 +00:00
zedamota
257b4d2c95 flight - BL AHRS Comms - fixes to make it compile, not tested yet.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1601 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 21:08:43 +00:00
stac
d18e0c3ef8 ahrscomms: Add low-level message code for bootloader msgs
Implement low-level utility functions for sending/receiving
the opahrs proto v0 (bootloader) messages.  These are used
by the OP firmware loader and the AHRS bootloader.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1586 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-11 23:06:31 +00:00
stac
c3c8a30bfc ahrscomms: fix return values on error
Some functions were returning -1 instead of one of the
valud enum values.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1585 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-11 23:06:29 +00:00
stac
6bf3038f3f ahrscomms: provide helper function for simple requests
This cleans up some of the boiler plate code that is
repeasted for simple (empty) requests that expect a
response.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1584 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-11 23:06:28 +00:00
stac
d1dc300081 ahrscomms: remove unused sync and switch_proto messages
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1582 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-11 23:06:25 +00:00
zedamota
aa1af2b9f3 OP-21/Flight Bootloader - Changes to make it independent of RTOS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1570 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-09 18:44:55 +00:00
stac
a19c225697 ahrscomms: reduce retries and retry delay
The number of retries and delay between retries was
increased in a previous commit.  This doesn't appear
to be necessary so I'm reverting the increases.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1432 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 02:15:02 +00:00
stac
0a7088c24a ahrs: fix type on flags, remove redundant code
No need to have boolean flags being floats.
Some of the attitude message was being populated twice.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1428 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 02:14:54 +00:00
peabody124
bd8fffe4d0 AHRS/Flight: Renamed AttitudeSettings to AhrsSettings to make it more intuitive. Added the ability to change the algorithm from GCS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1383 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 03:39:13 +00:00
peabody124
5662d85c4e OP-120 AHRS: Tightened up the communication protocol so it runs more quickly. Looks ok in gdb but GCS not crashing right now (rendering error) so I can't test it properly.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1366 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 00:21:54 +00:00
peabody124
8897c441fa OP-118 AHRS: Added AHRSCalibration object and messages associated with that to AHRS. Also made AHRS run calibration only when requested. We will create a GCS plugin that runs through computing the calibration settings. To compute the variances on the AHRS set the measure variances to true, wait ten seconds, then set it to false to read it back.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1363 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 21:46:02 +00:00
stac
26e257d340 spi: slow down OP <-> AHRS spi link
Issues have been reported with CRC errors
on the SPI link between the OP and AHRS
boards.  Slowing the link down eliminates
the errors in my testing.

If we speed this link back up in the future,
further investigation will be required to
diagnose the source of the CRC errors.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1356 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:20 +00:00
stac
f388deef34 hmc5843: standardize line endings
This file had mixed line endings.  Now they're all the same.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1353 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:14 +00:00
stac
7b2111e512 baroaltitude: rename AltitudeActual to BaroAltitude
This is to align the object names to matches the UAVObject
architecture doc.  No functional changes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1351 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:10 +00:00
peabody124
2031cfe4d0 OP-119 AHRS: Added error counters for the messages as well as changed an error on AHRS echo back for the HomeLocation message.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1344 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-20 22:52:13 +00:00
peabody124
ef0b307353 [OP-119] Flight/AHRS: Created a HomeLocation object which is updated when the GPS gets an initial 3D fix and populated with the information to convert from LLA from the GPS to NED reference frame. Also added a message for passing the MagneticNorth vector to the AHRS and removed that computation from AHRS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1337 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-19 20:38:27 +00:00
peabody124
3c4def13cc AHRS: Added message to pass GPS information into AHRS from OP. This is then converted
into NED reference frame and used in the INSGPS algorithm, although currently this
information isn't propagated back to OP.  Data structures related to the GPS position
into the algorithm and the position estimate out will likely be in flux.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1334 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-19 05:18:34 +00:00
stac
3125ecfc4e AHRSComms: altitude sensor data is now sent to AHRS
Altitude/pressure sensor data is sent to the AHRS whenever
the AltitudeActual object is updated.

Altitude, Pressure and Temperature are sent as floats.
Same as in the UAVObject that goes to the GCS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1291 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 01:02:13 +00:00
stac
c3e509c2cb attituderaw: Replace HeadingActual with AttitudeRaw
AttitudeRaw now includes:
 - magnetometers XYZ (in mG)
 - gyros XYZ (raw ADC samples)
 - accelerometers XYZ (raw ADC samples)
 - placeholder for gyro temp sensors (read as zero for now)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1289 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 23:42:14 +00:00
stac
f74c6ffdd5 i2c: rewrite i2c layer
The STM32 I2C block has a number of errata associated with it.
These errata are primarily related to timing sensitivities between
the peripheral and the interrupt handler.  In particular, the
correct generation of the stop bit relies on the I2C IRQ running
immediately and not being held off for any reason.

NOTE: The I2C interrupts must be the highest priority IRQs in the
      system to ensure correct operation.

I2C protocol is now implemented as a formal state machine.
See: stm32_i2c_fsm.{dot,jpg} for FSM description.

I2C init is now expressed by const initializers in pios_board.c
for both OP and AHRS boards.

I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays
of an unlimited number of bus transfers to be done atomically.
The I2C adapter driver now handles all bus-level locking across the
list of transactions.  Generation of start/restart/stop conditions
are handled automatically over the list of transactions.

Timeouts have been removed from the API for now.  May be added
back later.

This driver has run error free on both the OP and AHRS boards for
up to 48hrs but it still sometimes fails earlier than that on the OP
board.  There is another possible set of improvements to the driver
that could employ the DMA engine for transfers of >= 2bytes.  This
change would reduce the timing sensitivities between the peripheral
and the driver but unfortunately, both the SPI and I2C interfaces
share the DMA1 engine.  That means only one of these two peripherals
can use the DMA engine and right now, SPI between OP and AHRS is
already using it.

Failures are currently fatal and will lock up the CPU.  This allows
useful information to be obtained in the failure cases.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:15:08 +00:00
FredericG
66e22b56ce Fix in bmp085 driver. Was not checking correctly if lock on I2C succeeded => caused an assert when used in combination with other I2C devices
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1163 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 09:52:45 +00:00
peabody124
d928676f5e More documentation updates, standardizing format to include addtogroup at the beginning of headers so files are associated with modules
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1121 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 19:53:35 +00:00
peabody124
99e94228a9 More doxygen updates
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1106 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 05:31:11 +00:00
stac
17bea4cb91 ahrscomms: connect the OP board to the AHRS board
The AHRS comms module now sync's with the AHRS and
exchanges interesting data periodically.  Whenever
the link to the AHRS is down, the AHRSComms alarm is
raised.

This is fairly basic for now but provides the last
piece of the infrastructure to move data back/forth
between the OP and the AHRS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1014 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:49 +00:00
stac
29a8f05ac9 mag sensor: put some bounds on the parameters
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1012 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:45 +00:00
stac
89a6d6d912 ahrs spi: Add definition of OP<->AHRS SPI protocol
This defines the SPI message format as well as a few
initial messages for moving data across the link.

The v0 messages are place holders for firmware download
in the bootloader.

The v1 messages are to be used by the main application.

Note: This is not the final protocol definition.
      Subject to change without notice.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1004 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:15 +00:00
stac
71e491e3c1 com: mark tx buffer as const throughout API
The com layer transmit functions should provide guarantees
that they will not modify the buffer that you're transmitting.
Declaring the parameter as a pointer to const keeps the underlying
implementations honest.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1001 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:08 +00:00
stac
1169514bf9 sd card: fix SD R1 detection
SD R1 response format is defined as any byte with the MSb
cleared.  The code was testing for any byte that was not 0xFF
which can lead to misinterpreting a byte as the response.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@998 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:20:57 +00:00
stac
771a56ca9d com/usart: generalize com driver API
- Created a pluggable COM layer
- Converted COM + USART init into static initializers
  rather than typedefs
- Generalized the USB HID COM API to match the USART
  API.
- Changed USART and COM layers to be data driven rather
  than #ifdef'ing/switching on the specifics of each port

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@760 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:24:26 +00:00
stac
8d015a57d0 pios spi: support both master and slave configs
Added support for SPI slave configurations to the pios SPI layer.

Converted the board specific configuration for the PIOS SPI layer to
use const static initializers rather than #defines (see pios_board.c).

SPI interface between the OP board and the AHRS is now operational at
a basic level, capable of moving simple single byte messages between
boards.  Multi-byte, CRC protected messages will be added on top of this.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@759 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:23:44 +00:00
stac
69de42db49 Add AHRS attitude module and driver skeletons
- New Attitude module for AHRS (skeleton)
 - New AttitudeSettings UAVobject
 - New AttitudeActual UAVobject
 - Regenerated UAVobjects
 - Added new UAVobjects to OpenPilot and GCS builds
 - New PiOS driver for OpenPilot AHRS (stubs only)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@655 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-24 16:33:36 +00:00
stac
e892dcb033 bmp085: create semaphore prior to configuring irq
Since the EXTI and NVIC init routines automatically enable the IRQ when it
is configured, it is possible for the EOC interrupt to fire immediately
upon configuring the IRQ.

Since the handler for the EOC interrupt (EXTI15_10_IRQHandler) does a
xSemaphoreGiveFromISR, it is important to have the semaphore initialized
prior to enabling the interrupt.

Also, added missing include for altitude module.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@654 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-24 16:33:30 +00:00
gussy
73b5e29e02 Finalised and verified PIOS_HMC5843 library.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@624 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-15 12:50:05 +00:00
gussy
ff73ab5a80 More updates to cross-target compatibility.
Added PIOS_I2C into AHRS code.
Added PIOS_HMC5843 Module.




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@617 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-12 08:18:49 +00:00
gussy
8f3c2dbafb Changes to PiOS to be compatible with the AHRS.
Updates to AHRS code.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@615 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-11 13:36:13 +00:00
vassilis
a31215293d Flight\Telemetry Implement telemetry settings object, added functions for changing the baud rate in PiOS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@607 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-08 02:44:26 +00:00
gussy
0aba12fe1f Loopback test of HID working. Still a WIP but committing what I have to show progress.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@582 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-04 18:54:43 +00:00
fredericg
3281b1a128 OP-27 Use RTOS in LockDevice() and UnlockDevice()
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@564 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-01 14:49:51 +00:00
vassilis
8c11a03129 Flight/Alarms Implemented Alarms library, now checking for stack overflow, out of memory, event and other errors (see the SystemAlarms object). All modules will be reporting their alarms using this library.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@554 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-27 01:55:28 +00:00
vassilis
f4c4b1371a Flight/Settings: Remove old settings implementation (replaced with binary settings as UAVObjects)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@465 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-10 01:35:13 +00:00
gussy
41fd921b14 Updated BMP085 test code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@375 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-23 04:01:11 +00:00
gussy
362163d48b Added dependency checking, just in case.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@371 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-22 02:09:56 +00:00
gussy
6826706cb7 Moved external interrupts into it's own API.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@370 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-22 02:07:06 +00:00
gussy
a03952fb5d Small updates and clean up.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@355 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-21 00:49:48 +00:00
gussy
8ba2d76cd6 OP-21: Cleaning up a few things.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@302 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-13 20:46:46 +00:00
gussy
7863954f1a Added debugging port buffer handling.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@297 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-13 15:37:00 +00:00
FredericG
50215e75c6 OP-28 Some changes in the I2C API
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@296 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-13 12:23:55 +00:00
gussy
978e07419d Small FreeRTOS fixes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@294 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-13 06:44:15 +00:00
gussy
6764a34285 Updated some FreeRTOS specific issues and fixed a few typos.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@292 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-12 16:22:56 +00:00
fredericg
47038af0c0 PIOS_DONT_USE_XXX => PIOS_INCLUDE_XXX
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@283 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-11 12:38:51 +00:00
dankers
e66c491942 Update to headers in the flight portion of the code. Just formatting.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@276 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-10 09:12:31 +00:00
gussy
c409a62978 PIOS_BMP085 module finished.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@262 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-06 16:04:31 +00:00
gussy
cafed0a148 BMP085 Sensor now working completely.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@261 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-06 14:20:42 +00:00
gussy
fd889b918b Updates to BMP085 readings.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@260 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-06 10:28:08 +00:00
gussy
5e70edb021 OP-1: Small fixes to reading/writing from sensor.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@256 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-06 06:09:18 +00:00
gussy
d406232eb1 Improvement OP-3; Implemented buffer based receiving functions, untested.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@254 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-06 03:13:14 +00:00
gussy
7de6be3f59 Reading and writing to BMP085 sensor now working.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@249 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-05 10:44:11 +00:00
gussy
792406510c Small fixes. BMP085 drivers still not working.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@246 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-04 15:41:21 +00:00
gussy
09645920ee PIOS_COM and PIOS_USART now non-application specific.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@243 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-04 07:07:27 +00:00
fredericg
ad816dc070 Renamed PIOS_I2C_TransferBegin => PIOS_I2C_LockDevice because it better describes what it does
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@231 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-03 11:46:24 +00:00
gussy
fcf47bf1f6 PIOS_USART now non-application specific.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@206 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 08:29:14 +00:00
gussy
95d068884a PIOS_BMP085 now non-application specific.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@205 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 07:01:18 +00:00
gussy
adcd47a31b Added ability to enable and disable PiOS modules.
Added PIOS_USB_COM.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@202 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 06:47:49 +00:00
gussy
9bce59ef1a Small cleanup changes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@200 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 04:47:51 +00:00
gussy
4eedbd854d A few updates for including PIOS_USB_HID into PIOS_COM.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@187 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-12 10:11:17 +00:00
gussy
0a9be2dedd USB HID now working and integrated into PIOS_COM.
You can now send and receive packets (up to 63 bytes) just like using the USART port with PIOS_COM.
HID packet length will soon be increased to support maximum UAVTalk message length.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@182 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-10 03:31:51 +00:00
gussy
3b32b89839 Updated copyright headers.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@146 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-01-31 17:56:54 +00:00
gussy
efdb5c5f2b Added MSD library.
Added PIOS_USB.
Global improvements, see specific files for changes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@144 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-01-31 16:48:23 +00:00
gussy
53ea65bb2f Updated PIOS_Settings_CheckForFiles routine to work with DFS.
Startup procedure now waits for SD Card with the correct settings files on it.
Refactored a few global PIOS_SDCARD names.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@140 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-01-25 16:30:31 +00:00
gussy
b2c23c5473 Added beginnings to POIS_PWM for RC Input.
Enabled ADC, needs reworking still.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@139 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-01-25 15:23:55 +00:00
gussy
c1ab22f595 Added variety of helper functions to PIOS_SDCARD.
Made minGlue even more robust and simpler.
Fixed a small bug with the servo output code, which is now working 100%.
Enabled USART, which can now be used for debugging.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@138 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-01-24 13:03:13 +00:00
gussy
39403ee20d Now using global filesystem mounting on bootup.
Changed bootup procedure for how the SD Card is handled.
Completed, optimised and added error handling to minGlue.c

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@137 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-01-24 08:13:48 +00:00
gussy
26410ad8de Back to where we were with r133, but now with proper SD Card code.
Additions to note; PIOS_SPI, DosFS and PIOS_SDCARD.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@136 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-01-23 17:31:14 +00:00
gussy
a4853aee53 Changed to sdcard startup procedure. Now puts diagnostic information on the SD card.
This revision is a good fall-back point as a basic test that the hardware and your development environment is working.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@133 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-01-21 02:04:15 +00:00
gussy
998ab12de4 Delays fixed.
SD Card fixed and working, tested with 2Gb and 8Gb (SDHC) cards.
Changed startup_stm32f10x_HD.S to work with SysTick_Handler, needs to be changed back for FreeRTOS to work.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@132 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-01-20 23:48:04 +00:00
dankers
3e76e78f47 stdint compliance
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@123 ebee16cc-31ac-478f-84a7-5cbb03baadba
2009-12-24 03:03:24 +00:00
dankers
5b31cc8813 Move SDCard functions.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@107 ebee16cc-31ac-478f-84a7-5cbb03baadba
2009-12-23 07:39:34 +00:00
dankers
f457599d9c Comment about where defaults live.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@86 ebee16cc-31ac-478f-84a7-5cbb03baadba
2009-12-21 04:10:50 +00:00
gussy
8eaaf20a21 Optimised startup procedure for speed.
Fixed bmp085 i2c write procedure.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@64 ebee16cc-31ac-478f-84a7-5cbb03baadba
2009-12-11 00:24:03 +00:00
gussy
d306ade1a7 Conversions now use the BMP085 EOC (End Of Conversion) pin with an external interrupt, which is a much nicer way of doing things.
One major timing caveat still exists, still deciding the best way to cross that bridge.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@63 ebee16cc-31ac-478f-84a7-5cbb03baadba
2009-12-10 06:08:28 +00:00
gussy
b6cc2df29d Finished off initial revision of BMP085 drivers.
Added math.h to pios.h includes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@62 ebee16cc-31ac-478f-84a7-5cbb03baadba
2009-12-10 04:28:21 +00:00
gussy
9eeaf09b80 Fixed a few typos in PIOS_I2C.
Started work on BMP085 driver. Need more information from Bosch to continue.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@61 ebee16cc-31ac-478f-84a7-5cbb03baadba
2009-12-10 01:59:46 +00:00
gussy
f52a719c1d Updated all PIOS function names to new standard.
New standard to be used is PIOS_Module_Function().
Likewise with OpenPilot, OP_Module_Function() is to be used.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@59 ebee16cc-31ac-478f-84a7-5cbb03baadba
2009-12-08 02:13:21 +00:00
gussy
e174898bf2 Added pios_servo. Straight from ST examples.
Updated printf-stdarg to use debug port.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@53 ebee16cc-31ac-478f-84a7-5cbb03baadba
2009-12-03 21:30:53 +00:00
gussy
42591b0edf Moved pios_settings.c to /PiOS/Common since it is not platform specific.
Started to add some FreeRTOS stuff into pios.c

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@47 ebee16cc-31ac-478f-84a7-5cbb03baadba
2009-12-02 06:44:53 +00:00
gussy
58b09ed761 Changed all mention and use of "UART" to "USART".
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@41 ebee16cc-31ac-478f-84a7-5cbb03baadba
2009-12-01 17:15:33 +00:00
gussy
f1bfb2a238 More moving.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@35 ebee16cc-31ac-478f-84a7-5cbb03baadba
2009-12-01 14:29:55 +00:00
gussy
d7cd647e7e Directory re-structuring. Doesn't compile yet, need to commit first.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@33 ebee16cc-31ac-478f-84a7-5cbb03baadba
2009-12-01 14:04:30 +00:00