1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-04 12:24:11 +01:00
Commit Graph

5644 Commits

Author SHA1 Message Date
Laura Sebesta
423e287494 Added zoom functionality to scopes. There is a minor bias error when zooming with the legends activated.
This is due principally to the fact that retreiving the Qt coordinate in the frame
references to a slightly different system from Qwt invTranformation when the
legend is active.
2012-05-25 00:48:58 +03:00
Mike LaBranche
7fb96f1acd Bugfixes in configwidgets;
Refactor mixer type and vector set/get, named vector elements;
2012-05-24 09:38:34 -07:00
Stacey Sheldon
ac75dd7be1 Revert "bu: remove LED support from bootloader updaters"
This reverts commit 7f03a77492.
2012-05-23 00:46:19 -04:00
Stacey Sheldon
400e529703 bu: add back LED feedback
LED support was dropped from the BU images due to a lack
of proper abstraction for LED definitions between CC and
CC3D HW variants in the CopterControl board family.

Use the new LED abstraction to hide board revision details
from the BU image so it can once again flash some LEDs.
2012-05-23 00:31:08 -04:00
Stacey Sheldon
56dddee56c cc: use defines for board revisions instead of hard-coded numbers 2012-05-23 00:29:12 -04:00
Stacey Sheldon
d2615cac96 hw_defs: hide board-rev differences in LED definitions
Every board has at least one LED (HEARTBEAT).  Not all
users of LEDs need to be directly aware of which LED
configuration to choose when there may be more than one
possible configuration.

Hide the details of the differences between LEDs used in the
different HW revs for CC.  This will allow generic code to
run on CC and CC3D without being exposed to the details of
the different pins used for the LEDs.
2012-05-23 00:22:11 -04:00
Stacey Sheldon
b97aba834a cc3d leds: move pin remapping into led definition
The LED driver supports GPIO remapping.  No need to
do the remapping outside of the LED definition.
2012-05-23 00:12:51 -04:00
Stacey Sheldon
dff43d5156 board_info: add guard for multiple includes of .h file 2012-05-22 21:50:53 -04:00
Laura Sebesta
534559680b Fixed tiny bug in ChronoPlotData. 2012-05-23 01:18:30 +03:00
Corvus Corax
64c1ac3bd6 Stabilization: Bugfix: moved queue initialisation to TaskStart where it belongs 2012-05-22 22:19:31 +02:00
Corvus Corax
7f334a9773 SimPosix: make use of compile time uavobjecto initialization function generation 2012-05-22 22:06:26 +02:00
Corvus Corax
31da29a24b Reenabled full UAVObject initialization for SimPosix 2012-05-22 21:22:59 +02:00
Mike LaBranche
2db4f6b2b6 Resolves mixer/advanced tab switching issue;
semi-centralized channelNames;
renames ConfigCcpmWidget
2012-05-22 09:55:50 -07:00
Corvus Corax
3e5741abea SimPosix: Remove unneeded modules from Makefile to allow test run 2012-05-22 18:45:23 +02:00
Corvus Corax
9aca773714 SimPosix: Reenabled File IO for UAVObject saving 2012-05-22 18:32:52 +02:00
Corvus Corax
0d23e78762 PiOS.posix: added missing header definition to use FreeRTOS tasks in udp driver if applicable 2012-05-22 18:32:47 +02:00
Corvus Corax
e16a42b672 SimPosix: Fixed Module Initialisation, added missing UAVObject Initialisations (cause segfaults if not initialised) 2012-05-22 18:32:41 +02:00
Corvus Corax
5727d5714e Created new "SimPosix" board and ported PiOS.posix to revolution API and more "standard like" configuration akin to other "boards" 2012-05-22 18:32:27 +02:00
Corvus Corax
414310fcba test add of SimPosix architecture - doesnt work yet 2012-05-22 18:28:42 +02:00
Laura Sebesta
5f7944bff1 Fixed display problem for in scope for math function type. Updated
OpenPilotGCS.xml to include default of "None" for scope math type.
2012-05-22 18:14:21 +03:00
Brian Webb
55dbb4e4c0 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-05-22 06:28:06 -07:00
Brian Webb
8b98d48fc4 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-05-22 06:27:45 -07:00
Laura Sebesta
6003d2d574 Changed order of scope math functions to be more logical.
Added "Average" as  scope math function.
Changed averaging window size text edit box to be active only when math functions are selected.
Fixed bug introduced immediately prior by removing child redefinition of saveConfig.

Tried installing scroll wheel event filter for scope config plugin, but is not currently working.
2012-05-22 12:34:01 +03:00
Laura Sebesta
a210b790b4 Added combo boxes to the mouse wheel filter. 2012-05-22 12:19:20 +03:00
Stacey Sheldon
3b0508e753 bu: check compatibility btw BL and HW before installing
CC and CC3D boards share the same FW image.  This is accomplished
by checking the BOARD_REVISION field in the board_info_blob
that is stored in the BL partition in flash as we init the FW.

Make sure that the BU image only writes a BL image that has
the same BOARD_TYPE and BOARD_REVISION fields in the embedded
image as the ones currently in flash on the board.

This ensures that we never write a CC3D BL image onto a CC board
and vice versa.  This check should prevent "bricking" a board.
2012-05-22 00:33:40 -04:00
Stacey Sheldon
e063bb0490 bl: use new USB "cable connected" API to halt in BL
BL only cares about the physical cable being connected.
Use the newly provided API that matches this intent.
2012-05-22 00:24:16 -04:00
Stacey Sheldon
dab400c80d usb: decouple "available" from "cable connected"
The bootloader needs to understand whether the USB cable
is connected.  The HID and CDC drivers need to know if
the cable is connected _and_ the device has been enumerated
already.  Separate these two concepts in the API.

Combining these was resulting in the BL not properly
detecting that the cable was plugged in, and trying to boot
the firmware image immediately.  This effectively bricked
the board if you ever had an invalid firmware image.

It also happens to be the case that the BU images automatically
invalidate themselves after updating the BL so they don't run
again.  The cable detect bug + this intended behaviour of the
BU image resulted in a bricked board after upgrading the BL.
2012-05-22 00:21:24 -04:00
Brian Webb
e3593691c3 Merge remote-tracking branch 'raid/Brian-PipXtreme-V2' into Brian-PipXtreme-V2 2012-05-21 19:24:50 -07:00
Brian Webb
6e359c5933 Added PipX to Windows .inf file and updated ppm port definitions. 2012-05-21 19:22:46 -07:00
Laura Sebesta
aeca5c6741 Added Math Functions to the scope. Currently only support standard deviation. 2012-05-22 05:21:11 +03:00
Laura Sebesta
ce139a12cc Missed a final typo. 2012-05-22 01:22:47 +03:00
Laura Sebesta
f4376b3445 Corrected small typo: disbleMouseWheelEvents vs. disableMouseWheelEvents 2012-05-22 01:20:23 +03:00
Laura Sebesta
3a1b15a65b Reworked scale plot entry to have a more descriptive name and function. 2012-05-22 00:40:01 +03:00
Laura Sebesta
cae53915d3 Fixed small typo: "sequencial" vs. "sequential" 2012-05-22 00:34:29 +03:00
Mike LaBranche
64688be0a1 Refactor configwidgets for multirotor,fixedwing,heli,ground;
VehicleConfig subclasses ConfigTaskWidget and adds guiconfigdata bit storage;
Align channelbox items so 'None' is first;
2012-05-21 11:28:29 -07:00
Brian Webb
59aa47fed8 Merge remote-tracking branch 'raid/Brian-PipXtreme-V2' into Brian-PipXtreme-V2 2012-05-20 19:36:43 -07:00
Brian Webb
e57543ec29 Updated USB on PipX to latest CDC changes. 2012-05-20 19:34:43 -07:00
Brian Webb
c91b8ddb6a Merge remote-tracking branch 'raid/Brian-PipXtreme-V2' into Brian-PipXtreme-V2 2012-05-20 18:36:19 -07:00
Brian Webb
6cb13aa2ba Fixed failed merge with next. 2012-05-20 18:36:08 -07:00
Brian Webb
19c79d627a Merge remote-tracking branch 'raid/Brian-PipXtreme-V2' into Brian-PipXtreme-V2 2012-05-20 18:31:34 -07:00
Brian Webb
2f1a9e3e7d Added PPM input to the PipXtreme. Also added configurable GCSReceiver timeout. 2012-05-20 18:30:37 -07:00
Stacey Sheldon
d7d670036b usb: make sure USB device is off limits until it has been init'ed
USB device was being accessed prior to being initialized.
This resulted in a hard-fault or NMI when using any endpoint
beyond 0 or 1 which are init'ed by the BL.  This broke VCP which
is on endpoint 2 (control) and 3 (data).

This bug was introduced in 5ad37e69 which stopped checking the
transfer_possible variable.
2012-05-20 13:28:16 -04:00
Brian Webb
bc9dcd415f Reverted unnecessary changes to configtaskwidget.cpp 2012-05-19 15:05:17 -07:00
Brian Webb
723f68f763 Reverted unnecessary changes to configtaskwidget.cpp 2012-05-19 14:18:29 -07:00
Stacey Sheldon
7e6a222a8e usb serial: refactor serial number construction
Use new PIOS_USB_UTIL_AsciiToUtf8() function to compose the
USB serial number rather than repeating that code for each
board.

All boards now append "+FW" or "+BL" to their USB serial numbers
to allow the descriptors to differ between FW and BL images.
2012-05-19 16:15:47 -04:00
Stacey Sheldon
698ea8e86e usb util: Add common utility functions for USB descriptors
Make a home for generic functions related to USB.
2012-05-19 16:14:10 -04:00
Stacey Sheldon
3e0a9bc47e usb: Change supported LANGID in USB descriptor to be English US
Some versions of Windows will ignore the USB device serial number
if the string is not delivered with LANGID = English US 0x0409.

This is true regardless of the configured locale of the machine.
2012-05-19 16:12:34 -04:00
Stacey Sheldon
19367730c0 usb: remove null termination on serial number string
The serial number string descriptor was incorrectly null
terminated.  The standard clearly states that there should
not be a null terminator.

Use new #defines to ensure that our strings are sized
properly.
2012-05-19 16:06:49 -04:00
Stacey Sheldon
b905607dc7 serial: use defines for serial number lengths
Use #defined sizes for returned serial number lengths instead
of hard-coded values.
2012-05-19 16:06:48 -04:00
Stacey Sheldon
ba8d60301c usb: remove run-time selectable device descriptors
BL images now always use hid-only.

FW images can use hid-only or hid+vcp but this is selected
ONLY at compile time based on whether PIOS_INCLUDE_USB_CDC
is defined.

CC uses HID+VCP by default now.
2012-05-19 16:06:48 -04:00