Added debug message displaying current VBO states (enabled, supported, used) - check with mouse right-click.
Please confirm that this does not break the plugin on other systems and that VBO can be enabled and really
is used by GLC_lib on supported systems. Also changed default 3ds model path.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1850 ebee16cc-31ac-478f-84a7-5cbb03baadba
fly (EKF rate up to a limit). Also, now the algorithm selects if you are
indoor or outdoor as well as if you use a mag indoor (if you do set the z
variance higher than it calibrates to).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1841 ebee16cc-31ac-478f-84a7-5cbb03baadba
when closing gadget and also center icon on click in magic waypoint.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1821 ebee16cc-31ac-478f-84a7-5cbb03baadba
and removed the unused field from actuator settings (old setting time and all
the aircraft specific stuff).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1820 ebee16cc-31ac-478f-84a7-5cbb03baadba
update since now drive by events. This means StabilizationSettings object
changing so write down your settings.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1819 ebee16cc-31ac-478f-84a7-5cbb03baadba
Again, use the previous version to convert old config files if needed :)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1812 ebee16cc-31ac-478f-84a7-5cbb03baadba
to stop from hammering telemetry and keep OP-AHRS smooth. Also fixed bad
connection in magic waypoint.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1807 ebee16cc-31ac-478f-84a7-5cbb03baadba
approach again because ran out of numerical precision for single pass. Also
made ground force the gyro signs to be correct.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1806 ebee16cc-31ac-478f-84a7-5cbb03baadba
correct. Six point calibration otherwise is sometimes inconsistent.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1805 ebee16cc-31ac-478f-84a7-5cbb03baadba
joystick found. Changed gadget name to Controller to remove redundant UAV.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1804 ebee16cc-31ac-478f-84a7-5cbb03baadba
People will need to install SDL :(. Anyone know if we can make the joystick
aspect of this code separate and detect at build time if they have the
requirements?
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1796 ebee16cc-31ac-478f-84a7-5cbb03baadba
as a dependency. Please let me know if you have any problems.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1793 ebee16cc-31ac-478f-84a7-5cbb03baadba
You can check how this works for you and report bugs. Layout works fine with screens as small as 800x600.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1791 ebee16cc-31ac-478f-84a7-5cbb03baadba
). Splitters now have 6 pixels of grab area on each side again, without
crashing 4.7.0.
I still is ugly code, but Qt leaves us no option :) Added some comments
to make this clear.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1769 ebee16cc-31ac-478f-84a7-5cbb03baadba
Flight: Create PositionDesired (the active waypoint) UAVObject and make the FlightSituationActual no update since it not used.
Flight: New velocity desired object that passes information between the look computing the desired velocity and the PID loop to get it (updated at different rates)
UAVObjects/PositionActual: Remove unused GPS fields
UAVObjects/PositionActual VelocityActual: Split the velocity into a separate object. ALso make sure all the information telemetered around is in cm to avoid using floats.
UAVObject/GuidanceSettings: New guidance settings object for the guidance module
Flight/Posix: Add the new objects to the Posix sim
Flight/Guidance: Computes a desired velocity based on position error than runs a PID loop to control roll and pitch to achieve that velocity. All distances are in cm, and updated the PositionActual fields to reflect this and use int32.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1760 ebee16cc-31ac-478f-84a7-5cbb03baadba
determine retransmitting calibration, home location and such.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1755 ebee16cc-31ac-478f-84a7-5cbb03baadba
Calibration should take less time now too (using second moments to estimate
variance in one pass). Now need to change to multiple messages to get the
calibration in to keep the request message size minimal. Also currently
running sensor calibrate doesn't store the gyro bias so if you want to use this
you'll have to tweak it manually. I'll fix that step tomorrow.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1741 ebee16cc-31ac-478f-84a7-5cbb03baadba
The system settings UAVObject is updated, you will have to recompile your firmware. If you want to take a look and let me know, please do!
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1737 ebee16cc-31ac-478f-84a7-5cbb03baadba
http://img93.imageshack.us/img93/8520/angrymonkey3uv.gif
Also I'm not sure ZoomReal is correct, this just gets things running. There
are some quirks with the OPMap scroll bar now that need to be addressed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1731 ebee16cc-31ac-478f-84a7-5cbb03baadba
Display running for a while. I'm blaming that on the text area filling
with a million lines, though that still needs to be confirmed.
So I added a arbritrary 200 line limit, after which lines at the top
start disapearing. Seems sensible anyways :)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1730 ebee16cc-31ac-478f-84a7-5cbb03baadba
Removing some Experimental and Incomplete Modules and their UAVObjects not suited for 1.0
- they will be moved into an experimental branch:
Navigation : experimental code only
FlightSituation: experimental code only
Guidance : preliminary draft - possibly to be replaced by peabody124 position hold code if finished in time.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1729 ebee16cc-31ac-478f-84a7-5cbb03baadba
Zoom now as no limit.
Other changes:
OPMapWidget:
SetZoom(double) accepts any value. Ex:19.4
double ZoomReal() returns the true zoom.
double ZoomDigi() returns the current digital zoom.
double ZoomTotal() returns digital+true zoom.
SIGNAL:
void zoomChanged(double ZoomTotal,double ZoomReal,double ZoomDigi);
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1727 ebee16cc-31ac-478f-84a7-5cbb03baadba
Creating GuidanceModule together with PositionDesired UAVObject (as discussed),
so dschin and me can work on it :-)
Will compile and (on sim_posix) execute, but PID logic is yet untested and preliminary.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1722 ebee16cc-31ac-478f-84a7-5cbb03baadba
See also: http://forums.openpilot.org/topic/1850-existing-configuration-files-read-this-if-you-have-them/
Note: Reading binary layout (which gadgets are shown in each workspace and how they are split) still is available, since that was a later change. That'll get done somewhere in the future :)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1720 ebee16cc-31ac-478f-84a7-5cbb03baadba
