rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
Code Issues Releases Activity
7,338 Commits 5 Branches 8 Tags 266 MiB
4b35cdf0ef
Commit Graph

123 Commits

Author SHA1 Message Date
James Cotton
4b35cdf0ef OSX Simulation: Start populating the board and fw information 
This will allow testing the tablet to know what type of UAVOs to
expect.
 2012-10-07 13:53:19 -05:00
James Cotton
13e7733e5f Merge branch 'revo-mini' into revo 2012-09-12 02:30:10 -05:00
James Cotton
88b483f37d PIOS_MPU6000: Make the driver perform the rotation to bring it into the OP 
coordinate system

Previously there were hacks spread throughout to deal with various ways of
positioning the chips.  Now the driver structure specifies the rotation
of the chip relative to the board layout and the output X/Y/Z are already
in OP convention.

This flag seems to do the right thing for Revolution, CC3D, and RevoMini
 2012-09-11 01:46:22 -05:00
a*morale
316e02612e mapped LED1&2 ports to output 9&10 so that it is possible to use as accessory or pwm buzzer 2012-09-10 20:14:15 -05:00
James Cotton
b95a78cde5 Roll back changes on the revo target 2012-08-25 17:33:14 -05:00
James Cotton
982750a58f Merge remote-tracking branch 'revo/brian/revo_link' into revo-mini 
Conflicts:
	ground/openpilotgcs/src/plugins/plugins.pro
 2012-08-25 15:05:47 -05:00
Brian Webb
415b86879c Added the RFM22B driver to the Revo to support an RFM22B radio on the external SPI port. 2012-08-25 11:45:43 -07:00
a*morale
789746151a Fixes the selection of the oversample settings from the pios_ms5611_cfg.oversapling configuration 2012-08-25 11:29:01 +02:00
James Cotton
880eb5eb11 Fix revo for the removal of SDCard supprot 2012-08-12 14:45:06 -05:00
James Cotton
617de9c68b Revert "Disable the FLASH_FREERTOS flag for revolution so that it doesn't try and use" 
This reverts commit 7522bd07ba.
 2012-07-24 01:49:53 -05:00
James Cotton
7522bd07ba Disable the FLASH_FREERTOS flag for revolution so that it doesn't try and use 
vTaskDelay while erasing flash.
 2012-07-23 09:42:53 -05:00
James Cotton
57a554f7ea Enable the GPS UBX/NMEA support 2012-07-22 01:17:29 -05:00
James Cotton
0c054a1e62 Speed up attitude loop on Revo to 666 Hz 2012-07-21 17:25:06 -05:00
James Cotton
bcdd5a8bba Fixes to the overo module where it was thinking the fifo buffer writes failed 2012-07-20 13:45:31 -05:00
James Cotton
5091b16065 Needs work but it's sending data now 2012-07-20 11:36:49 -05:00
James Cotton
6b3e5573a0 The overosync module now uses pios_com interface. 2012-07-20 09:46:28 -05:00
James Cotton
8fc2d10ea6 Get the pios_overo driver for pios_com compiling 2012-07-20 09:32:22 -05:00
James Cotton
a6ba379af9 PIOS_OVERO driver which handles the communications to the overo and ensures the 
data stays in frame.
 2012-07-17 15:34:54 -05:00
James Cotton
9f93c9cbec Get PIOS_GCSRCVR working on revo 2012-06-04 09:48:05 -05:00
James Cotton
dc7fe1bdd8 Try and get pios_gcsrcvr working on simulation and revo for testing RTH. Had 
to include uavobjectmanager.h manually which was weird
 2012-06-04 09:48:05 -05:00
James Cotton
71e14a691e Merge branch 'next' into revo 2012-06-03 19:00:51 -05:00
James Cotton
e8cf606f16 Add the chip size to the flashfs configuration (should probably go in the chip 
configuration)
 2012-06-02 11:00:42 -05:00
James Cotton
8a6073fbaf Merge remote-tracking branch 'revo/revo-next' into testing 
Conflicts:
	Makefile
	flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/portable/GCC/Posix/port.c
	flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/task.c
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/portable/GCC/Posix/port_posix.c
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
	flight/Revolution/Makefile
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	ground/openpilotgcs/src/plugins/uploader/devicewidget.cpp
	shared/uavobjectdefinition/taskinfo.xml
 2012-05-28 09:13:26 -05:00
Corvus Corax
978ab5b96c Merge remote branch 'origin/stac/etasv3' into revo-next 2012-05-28 12:56:27 +02:00
Stacey Sheldon
8d47dc1fe4 revo usb: apply recent hid+vcp decscriptor changes to revo 2012-05-27 21:35:13 -04:00
James Cotton
bbb14f5f14 Trying to get F4 PIOS_ADC working. Changed from previous implementation timed 
by another timer to running continuously.  May go back to the previous since no
need to get tons of data.
 2012-05-15 03:19:44 -05:00
James Cotton
836e34a483 Change revo sensors to update at 500 Hz and make sure in all cases it waits for 
the relevant queue to provide data.  Also disable the quaternion stabilization
flag.
 2012-05-12 13:12:56 -05:00
James Cotton
848f1b0e29 For some reason the gyro needs 300 ms after reset in order to work after the 
bootloader jumps to code.  Nothing in datasheet to imply what.
 2012-05-12 13:00:51 -05:00
Sambas
dedbbec8f0 Make guidance support my Y6, also caused telemetry/usb RXdatarate go thru the roof (Guidance Warning). Almost impossible to change dataframe type to supported one with clean board. 
USB interrupt fix.
Heap warning critical sizes backwards.
 2012-05-07 12:51:07 -05:00
Stacey Sheldon
ad75e354eb etasv3: Add etasv3 driver to revolution 2012-04-17 09:39:47 -04:00
Stacey Sheldon
853600a2ef i2c: enable flexiport i2c on revolution 2012-04-17 09:38:27 -04:00
James Cotton
f491c924d6 Start updating the OSX UDP simulation to use a separate thread for receiving 
but it needs two - one as a task (where the com callback occurs) and another
for the physical process stuff that doesn't need to suspend (like teh TCP
thread does)
 2012-04-03 09:17:55 -05:00
James Cotton
09ce6e1ab4 Restore the original Revolution FreeRTOSConfig and make the osx simulation 
scheduler not start high priority tasks when they are created because I can't
reliably get the starting task to stop (because currently in a swapping mutex I
think).
 2012-04-03 09:16:30 -05:00
James Cotton
fbd8695d7d Check in WIP for osx simulation 2012-04-03 09:16:30 -05:00
James Cotton
9d5dbe4bfe Create stub for TCP connection of simulation 2012-04-03 09:16:28 -05:00
James Cotton
dfa39b59bf Rename the pios_config file for simulation 2012-04-03 09:16:26 -05:00
James Cotton
76bdd09795 Rename the pios_config file for simulation 2012-04-03 09:16:26 -05:00
James Cotton
e79a6e292b Add watchdog flag for simulated sensor task 2012-04-03 09:16:26 -05:00
James Cotton
e0fbdaf9fe Move the pios_board_posix file to something more general 2012-04-03 09:16:26 -05:00
James Cotton
c8a64ccbc7 Need to use slightly different code to generate the InitMods.c function for 
simulation because of the Attitude/Revolution format.
 2012-04-03 09:16:26 -05:00
James Cotton
5589ca60db Check in compilation files for OSX simulation. Update to work on revolution 
tree.
 2012-04-03 09:16:26 -05:00
James Cotton
dd5a71c48d Add watchdog flag for simulated sensor task 2012-04-03 09:16:25 -05:00
James Cotton
ae2f1e95f6 Move the pios_board_posix file to something more general 2012-04-03 09:16:25 -05:00
James Cotton
5fd569829c Need to use slightly different code to generate the InitMods.c function for 
simulation because of the Attitude/Revolution format.
 2012-04-03 09:16:25 -05:00
James Cotton
7ba32f8735 Check in compilation files for OSX simulation. Update to work on revolution 
tree.
 2012-04-03 09:16:24 -05:00
James Cotton
54880c83a0 Fix some task sizes and the memory limits 2012-04-03 03:42:30 -05:00
James Cotton
23625904c5 Remove the now unused ECEF and Rne fields from HomeLocation. Also reenable 
calculation of the WMM and HomeLocation from the GPS code for revolution.
 2012-04-03 03:42:28 -05:00
James Cotton
e82323af32 Make revolution work with the FreeRTOS queue based MPU6000 driver 2012-04-03 03:41:52 -05:00
James Cotton
2f8049e20a Update the bootloader hw version for the mpu6000 board and make the sensor code 
and initialization respond appropriately.  Enable hte L3GD20 and BMA180.
Let the board type determine which is used.
 2012-03-22 00:41:37 -05:00
James Cotton
e7ca02c038 Initialize mag before mpu6000. Seems more reliable but I don't know why. 2012-03-21 03:42:15 -05:00