Alessio Morale
ae9f30c729
OP-1477 - Fix mag exti config, set correct rate, set correct SPI speed for hmc5x83. Note: GPIO is disabled as it seems there is some issues with Exti on PB0
2014-10-01 02:07:46 +02:00
Alessio Morale
9e0596c2c5
Merge remote-tracking branch 'origin/amorale/OP-1379_ext_led_notification_module_new' into next
...
Conflicts:
Makefile
flight/targets/boards/discoveryf4bare/firmware/Makefile
flight/targets/boards/revolution/firmware/Makefile
2014-09-29 21:26:31 +02:00
Alessio Morale
93cf6b457f
OP-1507 - optimize com fifo usage when RX callback receives a single byte
2014-09-27 00:20:15 +02:00
Alessio Morale
3c6a8e0395
OP-1379 - Prevent loosing any update to background notification and notifications with priority higher than current
2014-09-21 23:32:52 +02:00
Alessio Morale
f2a0daac5c
OP-1477 - Add pios_ubx_ddc driver to handle i2c comms with UBlox GPS
2014-09-16 22:40:52 +02:00
Alessio Morale
984a7a675c
OP-1275 - add ChangeBaud to PIOS_COM_MSG
2014-09-16 00:42:51 +02:00
Alessio Morale
94c39caa50
OP-1275 - Fix PIOS_COM to be used with no PIOS_INCLUDE_FREERTOS defined
2014-09-16 00:42:51 +02:00
Alessio Morale
b4c1a856c7
OP-1274 Implement 4 bytes aligment for standard malloc (while keeping 8byte alignment for RTOS Stuctures) as done for M3
2014-09-16 00:42:48 +02:00
Fredrik Larrson
ebfdaf28b5
Merge remote-tracking branch 'origin/havyan/OP-1473_sbus_eof' into next
2014-09-08 01:35:39 +10:00
Karl Knutsson
ec0d44e1b0
OP-1473 Fix EOF handling for R7008SB
2014-09-04 18:15:36 +02:00
Alessio Morale
1f74977472
OP-1379 add base types for colour, Initial ext rgb led api definition
2014-08-12 09:44:44 +02:00
Alessio Morale
6a3cb7b808
OP-1403 - Add support for multiple hmc* devices
2014-08-02 20:48:41 +02:00
Alessio Morale
57a43a5587
OP-1403 - Migrate to new HMC5x83 driver and remove old HMC5883 one
2014-08-02 20:48:34 +02:00
Alessio Morale
2a8429320d
OP-1403 - Support HMC5983 temperature sensor/compensation
2014-08-02 20:48:24 +02:00
Alessio Morale
3c1b689224
OP-1403 - Add generic I2C/SPI HMC5x83 mag driver
2014-08-02 20:48:16 +02:00
Alessio Morale
6c38eda192
OP-1395 - Reset log num when changing flight num. fix flight num update logic
2014-07-09 23:05:38 +02:00
Alessio Morale
61d26d7fd8
op-1395 - automatically increment flight number after disabling log.
2014-07-09 08:39:32 +02:00
Alessio Morale
711c3609b6
OP-1395 - Add support for Fast read, explicitly set SPI clock speed to maximum allowed by all parts used
2014-07-08 02:53:25 +02:00
Alessio Morale
55b325966a
OP-1395 - Pack several objects on a single Debug Log "slot", after ten consecutive failures (log full) gives up trying to save to prevent wasting time. Use PIOS_Delay for timestamp
2014-07-08 02:47:09 +02:00
Alessio Morale
c6a773363f
Merge branch 'amorale/OP-943_add_malloc_for_ccsram' into next
...
Conflicts:
flight/pios/common/pios_adxl345.c
make/apps-defs.mk
2014-06-22 19:31:03 +02:00
Alessio Morale
a03ad41bab
Merge branch 'amorale/OP-1365_pios_instrumentation' into next
...
Conflicts:
flight/modules/Attitude/attitude.c
2014-06-22 19:13:46 +02:00
Alessio Morale
263fd64ab5
Merge branch 'amorale/OP-1274_freertos_v8.0.0' into next
2014-06-22 16:06:21 +02:00
Alessio Morale
eb5deb3eca
OP-1274 Remove unneeded cast from task name in xTaskCreate call
2014-06-18 01:47:43 +02:00
Alessio Morale
61f71add4c
OP-943 add missing pios_mem.c from previous commit
2014-06-11 23:54:28 +02:00
Alessio Morale
6226aec2a7
OP-943 uses pios_mem API for heap allocation
2014-06-11 22:15:40 +02:00
Alessio Morale
d8f08a7916
OP-943 Add Malloc for "FastHeap" (ccsram)
...
- Use a separate mallocs for thread stack and RTOS structures heap
- Add a pios_mem API to be able to use fast ram (CCM) when available
2014-06-11 22:15:30 +02:00
Alessio Morale
622519b7c2
OP-1365 Flight code instrumentation API: add documentation to pios_instrumentation_helper, uncrustification
2014-06-10 22:13:20 +02:00
Alessio Morale
698d132f9c
OP-1365 Flight code instrumentation API: Changed API to use handlers (opaque pointers) to counter struct instead of an index, fix Search function, create does check if coutner exists and return existing handler
2014-06-10 21:24:28 +02:00
Alessio Morale
07d2e27276
OP-1274: Update to FreeRTOS 8.0.1
2014-06-10 19:42:11 +02:00
Alessio Morale
ee8ffed465
OP-1274: Force 8 bytes alignment for RTOS structures while using 4 bytes alignment for the remaining memory allocation operations to save RAM
2014-06-10 19:10:37 +02:00
Alessio Morale
a0d68c6afb
OP-1227 Fix high CPU usage: Reduce Accel rate to 1600Hz, optimize sample reading, explicitly set bus speed
...
Note: Counter 0xA3450001 is the time it takes to transfer the requested number of samples
2014-06-08 21:33:18 +02:00
Alessio Morale
9db264a457
OP-1365 Flight code instrumentation API: Add CopterControl support
2014-06-07 00:47:06 +02:00
Alessio Morale
1c92edb18b
OP-1365 Flight code instrumentation API: Fix min/max handling
2014-06-06 22:38:49 +02:00
Alessio Morale
520e721bdd
OP-1365 Flight code instrumentation API: PiOS Implementation
2014-06-06 22:15:18 +02:00
Alessio Morale
af8fe1f921
OP-1274 Fixes for Simposix
2014-05-18 22:56:57 +02:00
Alessio Morale
36e304f579
OP-1274 fixes for revolution
2014-05-18 22:56:48 +02:00
Alessio Morale
e9fff2b6fa
OP-1274 fixes for OPLink
2014-05-18 22:56:44 +02:00
Alessio Morale
be5cc66bd3
OP-1274 fixes for Coptercontrol firmware
2014-05-18 22:56:29 +02:00
Alessio Morale
921abb5131
OP-1274 update freertos files. Architecture specific files are left into their original FreeRTOS folder structure
2014-05-18 22:53:23 +02:00
Alessio Morale
e5d6726bb6
Merge remote-tracking branch 'origin/next' into amorale/OP-1302_updated_led_behaviour
2014-05-08 22:27:08 +02:00
Alessio Morale
f01cf66095
Merge remote-tracking branch 'origin/andrecillo/OP-1273_OP-1282_OP-1283_Diverse_Airspeedsensor_improvements' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/systemhealth/systemhealthgadgetwidget.cpp
2014-04-15 21:52:34 +02:00
Alessio Morale
82139a6e44
Merge remote-tracking branch 'origin/amorale/OP-1294_fix_stacks_heap_cc' into next
2014-04-15 21:46:26 +02:00
Alessio Morale
299f388245
OP-1302 Add a stub pios_notify API for user interaction/notifications
...
right now all notifications produces the same output, the DRAW_ATTENTION sequence
2014-04-13 17:42:57 +02:00
Philippe Renon
3b7b06aad0
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2014-04-09 09:11:54 +02:00
Philippe Renon
1b356341c7
OP-1033 pios_rfm22b.c will not be messed up by uncrustify anymore :)
2014-04-09 09:06:18 +02:00
Alessio Morale
1aefc61bc4
OP-1294 Resize stack for CallbackScheduler.
2014-04-07 00:31:48 +02:00
Alessio Morale
6540c69698
Merge remote-tracking branch 'origin/andrecillo/OP-1273_PixHawk_airspeed_sensor_MS4525DO' into next
2014-04-01 22:05:12 +02:00
Andres
830f13596e
OP-1273 OP-1282 OP-1283 uncrustify
2014-03-31 22:17:58 +02:00
Andres
5ed417323e
OP-1273 OP-1282 OP-1283 bug fixes on I2C library: check for intialization and hot-plug robustness
2014-03-31 22:16:29 +02:00
Andres
7067f4f8ff
Merge branch 'andrecillo/OP-1283_SystemHealthGadgetWidget_updateAlarms_coordinate_calculation_correction' into andrecillo/OP-1273_OP-1282_OP-1283_Diverse_Airspeedsensor_improvements
...
Merged correction on coordinate calculation in SystemHealth gadget for correct display of Airspeed-Alarm
2014-03-28 17:01:44 +01:00
Andres
c5dc556a43
OP-1273 Uncrustify
2014-03-27 16:19:22 +01:00
Andrés Chavarría Krauser
4dff86dc9c
OP-1273 New files for the MS4525DO PixHawk speed sensor: PIOS files and module files
2014-03-25 10:37:10 +01:00
Alessio Morale
519d74ad1b
OP-1026 fix review issues
2014-03-09 16:08:27 +01:00
Alessio Morale
73d0b93829
OP-1026 Add a task monitor api to calculate idle percentage
2014-02-22 00:29:02 +01:00
Corvus Corax
e97ce303b8
Merge branch 'corvuscorax/OP-942_task-diagnostics-for-callbacks' into next
2014-02-18 00:03:07 +01:00
Alessio Morale
3044185019
Merge remote-tracking branch 'origin/amorale/OP-1218_pios_com_thread_safe' into rel-14.01
...
Conflicts:
flight/modules/RadioComBridge/RadioComBridge.c
2014-02-17 15:24:50 +01:00
Alessio Morale
da5ef3b3cc
OP-1218 Raise time PIOS_COM_SendBuffer waits to acquire sendbuffer semaphore
2014-02-15 22:05:56 +01:00
Alessio Morale
8cd5cfe2eb
OP-1218 format/consmetic/comments fixes
2014-02-15 22:05:56 +01:00
Alessio Morale
1ba5dbaca8
uncrustify
2014-02-10 22:57:24 +01:00
Alessio Morale
fd92e2a497
Merge remote-tracking branch 'origin/amorale/OP-1218_pios_com_thread_safe' into rel-14.01
2014-02-10 20:52:15 +01:00
Alessio Morale
79b68ae886
OP-1218 locks SendBuffer under the same mutex as SendBufferNonBlocking
2014-02-09 19:57:05 +01:00
Alessio Morale
67117d228d
OP-1149 change POW2 as POW2(0) led to undefined results
2014-02-09 12:05:40 +01:00
Alessio Morale
1569881e94
OP-1149 Remove shifts as they can have bad behaviours for negative numbers.
...
Documents correction algorithms as described in ms5611 documentation
2014-02-09 12:05:32 +01:00
Alessio Morale
5fa390ec9d
OP-1149 fix low temperature compensation formula
2014-02-09 12:05:28 +01:00
Alessio Morale
590c27af29
OP-1218 fix thread safety issue with pios_com PIOS_COM_SendBufferNonBlocking
...
(kudos @filnet for finding this)
2014-02-09 11:37:02 +01:00
Corvus Corax
c74790b823
OP-942 correct reporting of callback stack overflows
2014-02-07 22:57:31 +01:00
Corvus Corax
7ec21a8f36
OP-942 duplicated exact API of task_monitor to also monitor callbacks
...
This allows cleaner and fine grained handling of STACKOVERFLOW alarms
2014-02-07 22:39:16 +01:00
Corvus Corax
9a6072d58c
Merge branch 'next' into corvuscorax/OP-942_task-diagnostics-for-callbacks
...
Conflicts:
flight/targets/boards/simposix/firmware/Makefile
2014-02-07 00:31:32 +01:00
Corvus Corax
6566a29054
OP-942 reliable and fast free stack test algorithm - will always 'see' overflows
2014-02-06 23:54:30 +01:00
Corvus Corax
c7ada40c2e
Merge branch 'corvuscorax/OP-1211_time_measurement_helper' into rel-14.01
2014-02-06 19:56:47 +01:00
Corvus Corax
216ec095e4
OP-1211 removed unneeded define
2014-02-06 19:34:34 +01:00
Corvus Corax
723e22aa1a
OP-1211 time_measurement_helper
2014-02-04 19:05:17 +01:00
Corvus Corax
cc04b780c5
OP-942 one possible but not well working implementation of stack end check
2014-02-04 17:53:51 +01:00
Corvus Corax
418f7e3d0f
OP-942 task diagnostics for callback scheduler
2014-02-03 01:00:07 +01:00
Corvus Corax
49a1c4c28f
OP-942 refactored callback scheduler to fit into PiOS naming scheme
2014-02-02 22:08:16 +01:00
Corvus Corax
5b9a17f630
OP-942 moved DelayedCallbackScheduler into pios/common
2014-02-02 20:31:37 +01:00
Corvus Corax
597ac4db2a
OP-1195 increase priority for pios radio link driver task
2014-02-02 14:09:50 +01:00
Alessio Morale
745a9e8853
Merge remote-tracking branch 'origin/fnurgel/OP-1148_r7008sb_sbus_protocol_fix' into next
2014-01-18 14:21:57 +01:00
Corvus Corax
41202a0227
Merge branch 'corvuscorax/OP-1022_AH_improvements_amorale' into next
2014-01-15 22:47:42 +01:00
Philippe Renon
c8a81f88a4
OP-1122 OP-1158 added facility to update a CRC with uavobject data (flight side)
2014-01-12 15:12:41 +01:00
Mikael Blomqvist
b1d2c1b83e
Adding R7008SB end byte as a possible end of frame check for S.Bus
2014-01-03 18:25:44 +01:00
Philippe Renon
d668153b6d
OP-1122 OP-1125 fixed copy/paste error in rfm22b flight code
2013-12-14 16:03:42 +01:00
Alessio Morale
29df9d6dad
OP-1139: Add some more descriptive names and comments for compensation variables
2013-12-13 17:10:11 +01:00
Alessio Morale
13b45b2b78
OP.1139: uncrustify
2013-12-10 01:44:13 +01:00
Alessio Morale
75842cb648
OP-1139: perform second order low temperature compensation.
...
It follows the procedure described in MS5611 datasheet(http://www.meas-spec.com/downloads/MS5611-01BA03.pdf , page 8)
to perform low(20°) and very low(-15°C) temperature compensation.
2013-12-10 01:21:05 +01:00
Corvus Corax
25fd3d5740
Just uncrustification
2013-11-26 00:43:02 +01:00
Fredrik Arvidsson
2fc34910e0
OP-1119 Fix in pios function for debuglogging uavo.
2013-11-26 00:36:59 +01:00
Corvus Corax
be9faabe92
Merge branch 'next' into corvuscorax/onboardlogging
2013-11-26 00:34:01 +01:00
Alessio Morale
bacc4d3d79
Merge branch 'master' into next
...
Conflicts:
flight/targets/boards/oplinkmini/firmware/pios_board.c
ground/openpilotgcs/copydata.pro
2013-11-25 01:12:10 +01:00
Corvus Corax
89afbde58a
initialized log packages with 0xff instead of 0x0 to reduce flash wear
2013-11-24 15:36:26 +01:00
Corvus Corax
fcc479f5cb
more intelligent log interfacing, including flash formatting option
2013-11-17 20:14:50 +01:00
Corvus Corax
6031200aea
Some fixes in debuglog to compile and run on all firmware platforms
2013-11-17 18:04:47 +01:00
Corvus Corax
adfbdfae38
Make use of (now supported) standard snprintf in stdarg-printf when used in logfs
2013-11-17 02:49:53 +01:00
Corvus Corax
314d526e94
corrected instance id encoding in filename to not conflict with metadata uavobject ids
2013-11-16 18:55:54 +01:00
Corvus Corax
00321b09dc
Modified uavobjectmanager to only use logfs calls for UAVObject flash transactions, abstracted dosfs calls to use logfs wrapper class for simpiosix and SD-card access
2013-11-16 17:30:40 +01:00
Mathieu Rondonneau
03b243fe31
OP-1079 - Update to FreeRTOS v7.5.2
2013-09-04 20:26:23 -07:00
Brian Webb
e246ecf536
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
2013-07-28 07:01:08 -07:00
Richard Flay (Hyper)
c3e3521001
OP-1049: Hotfix to 13.06.02 for MPU6000 FIFO overflow on CC3D when board initialisation takes
...
longer than 150ms.
2013-07-28 01:16:22 +09:30
Brian Webb
0d02df4d02
Uncrustified OPLink code.
2013-07-05 18:49:26 -07:00
Brian Webb
d0d8a0aadd
OP-932 Adds PWM outputs to OPLinkMini. Both gpio pins on the main and/or flexi port can be configured to output PWM for a total of up to 4 PWM outputs.
2013-07-03 18:58:34 -07:00
Brian Webb
c76ee7de9d
OP-932 Fixes the failsafe that detects when the Rx modem loses sync with the Tx modem. This was not working on one-way mode.
2013-06-30 16:08:50 -07:00
Brian Webb
491e5fe685
Adds a failsafe on PPM output on OPLink that kicks in when the link goes down. Also updates all air datarate settings and adds new 64 and 100 kbps modes.
2013-06-29 15:00:38 -07:00
Brian Webb
d5f16faaec
OP-932 Fixes the datarate used on PPM only mode, and fixes failsafe on PPM output on OPLM.
2013-06-26 20:11:39 -07:00
Brian Webb
caa8d3e70e
OP-932 Forces one-way to be set when PPM only is configured.
2013-06-26 18:02:08 -07:00
Brian Webb
2aea2342ab
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
2013-06-26 18:01:54 -07:00
Brian Webb
44a0266e41
OP-932 Adds claiming of the SPI bus in the OPLink channel change function.
2013-06-26 18:00:02 -07:00
Brian Webb
56a60f2983
OP-932 Updates the 19.2 kbps datarate using the spreadsheet.
2013-06-26 17:59:49 -07:00
Brian Webb
61c453f6ff
Removes several of the air datarate settings, and fine tunes the calculation of the max packet length from the datarate and packet time. 9600, 19200, 36400, and 57600 modes tested. Tested 19200 in one-way mode for PPM only.
2013-06-26 17:59:33 -07:00
Brian Webb
cdd51537f1
Fixes the 9600 bps air datarate for the RFM33B modem.
2013-06-26 17:57:46 -07:00
Brian Webb
fc0328a3cd
OP-932 Adds working one-way mode to the OPLink radio connection. In this mode, packets will only flow from the ground side (coordinator modem) to the flight side modem.
2013-06-26 17:57:32 -07:00
Brian Webb
774a74884a
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
2013-06-26 17:57:11 -07:00
Brian Webb
8c370df319
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
2013-06-26 17:56:56 -07:00
Brian Webb
08efc8d152
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
2013-06-26 17:56:20 -07:00
Brian Webb
7c10623615
OP-932 Adds a semaphore to PPM input to signal when a new frame has been received. This can be used to process a new frame with as low a latency as possible.
2013-06-26 17:56:10 -07:00
Alessio Morale
5cc3645b96
Uncrustify
2013-06-18 20:23:46 +02:00
Alessio Morale
e9b3ee52f3
OP-997: add fields to SystemStatsUavo to monitor storage status
2013-06-09 19:20:00 +02:00
Brian Webb
e9f83bcc80
Fixes a bug in the rfm22b driver that was reading past the end of the bindings list when receiving a status message. Also adds some formatting changes that came about after doing a make uncrustify_all.
2013-05-26 08:36:38 -07:00
Brian Webb
ac4847c8ac
OP-932 Moves the configuration of the com ports on the coordinator OPLink to startup.
2013-05-21 19:48:21 -07:00
Brian Webb
dbce08a151
OP-932 Changes the radio task loop to loop every 1ms, and reduces the tx transmit period back down to 8ms. Also reduces the Tx windows to 1ms for each modem, and reserves the latter half of the Tx window for channel changing.
2013-05-21 17:40:05 -07:00
Brian Webb
d4a4588011
OP-932 Changes the RFM22 frequency hopping to change channels every Tx period. Also increases the Tx clock period from 8ms to 16ms, and adds a check on calculation the the time delta that it doesn't change the previous estimated time delta by too much. If the delta between the current time delta and the previously estimated time delta is too large it could indicate that there was a delay somewhere that makes the calculated time delta inaccurate.
...
Rearanges the packet send priority in the rfm22b driver so that PPM packets are top priority.
2013-05-20 20:49:24 -07:00
Sexy Pony
900f643bbd
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
Alessio Morale
ab7af16be3
Merge branch 'amorale/OP-901_lib_udates-usb_fixes' into HEAD
...
Conflicts:
flight/pios/stm32f10x/library.mk
flight/targets/boards/revoproto/firmware/pios_board.c
2013-05-19 15:01:08 +02:00
Alessio Morale
37eabb0931
Pointed type is explicitly used with sizeof when dealing with struct pointers.
...
+review OPReview-474
2013-05-19 12:00:16 +02:00
Alessio Morale
2e458b5652
OP-901 USB OTG/Device Drivers are not targeted for f103 (they are targeted at f105) so move again to F4 library folder instead of common
2013-05-18 20:53:28 +02:00
Alessio Morale
3ec9447fdc
OP-901 Update CMSIS to r3p2-00rel1
2013-05-18 20:29:06 +02:00
Alessio Morale
c1f767b12d
Merge remote-tracking branch 'origin/amorale/OP-954_logfs_settings_in_internal_flash' into next
...
Conflicts:
flight/pios/common/pios_flashfs_logfs.c
2013-05-18 15:53:25 +02:00
Alessio Morale
66da2796e0
Merge remote-tracking branch 'origin/amorale/OP-905_revolution_watchdog_next' into next
2013-05-18 15:00:50 +02:00
Alessio Morale
976ad90211
OP-901 Updated F4 CMSIS startup files, Moved USB OTG and USB Device library to common
2013-05-18 14:03:03 +02:00
Alessio Morale
67e41c34fc
Merge remote-tracking branch 'origin/next' into amorale/usb_fixes
2013-05-17 22:46:42 +02:00
Alessio Morale
2735f8a620
OP-901 Updated common CMSIS files
2013-05-17 22:41:34 +02:00
Richard Flay (Hyper)
ae14c13195
Merge branch 'next' into hyper/OP-951_add--Wshadow-to-flight-CFLAGS
...
Conflicts:
flight/modules/ManualControl/manualcontrol.c
2013-05-16 06:28:56 +09:30
Richard Flay (Hyper)
ef5bb6f6fe
Merge branch 'next' into OP-950_spi_fixes_FreeRTOS
2013-05-16 05:41:09 +09:30
Alessio Morale
707e648457
OP-905: Fixes. Prevent LogFS from triggering watchdog
2013-05-14 18:43:39 +02:00
Richard Flay (Hyper)
ed68fbe68d
OP-951: Adds -Wshadow to flight CFLAGS and fixes resulting compilation breakage.
...
+review OPReview
2013-05-14 07:01:45 +09:30
Oleg Semyonov
e5970ed25d
logfs: fix unit tests (requires MIN declaration from pios_math.h)
2013-05-12 03:51:00 +03:00
Stacey Sheldon
0d8fe83dca
usb cdc: advertise support for line coding and serial state
...
The CDC descriptor was not advertising support the the line
coding and serial state messages. This was preventing Mac
from sending the SetControlLineState message to indicate
that a DTE (ie terminal program) was present and reading
from the serial port.
We support (and depend on) the DTE indication now so this
was making CDC not work on Mac.
Linux seems to provide the indication regardless of whether
it is advertised in the descriptor or not.
2013-05-11 22:41:03 +02:00
Stacey Sheldon
b56f5206bd
com/usart/cdc: ensure that device structs are memset before use
...
CDC and USART device drivers were not all clearing their
device structs before using them.
This specifically caused crashes in the case where the upper
COM layer was binding only a Tx path. The Rx path callback
in the lower driver was uninitialized random data and would
result in the lower driver faulting when it tried to call the
callback.
Conflicts:
flight/PiOS/STM32F30x/pios_usart.c
flight/PiOS/STM32F30x/pios_usb_cdc.c
flight/PiOS/STM32F30x/pios_usb_hid.c
2013-05-11 22:40:59 +02:00
Stacey Sheldon
e16be98224
usb cdc: ensure com buffer is drained when no DTE is attached
...
The CDC layer on F1, F3 and F4 now always acts like an
infinte data sink whenever *either* there is no DTE present
(ie. no terminal program listening) *or* the USB cable is
disconnected.
F1 and F4 were previously checking the cable but not the DTE.
F3 didn't check anything. The COM layer didn't even ask the
lower layers.
All of this used to mean that any time a caller did a blocking
send to a CDC device without a DTE, it would eventually block
for up to a 5s timeout waiting for space in the Tx buffer.
Conflicts:
flight/PiOS/STM32F30x/pios_usb_cdc.c
2013-05-11 22:40:58 +02:00
Richard Flay (Hyper)
04f59d5910
OP-950: Adds "higher priority task woken" logic to SPI and SPI bus resident
...
sensor device drivers. Based partly on code contributed by lilvinz.
+review OPReview
2013-05-11 16:18:34 +09:30
Werner Backes
7c9d2ce9a5
Merge branch 'D-Lite/OP-934_rfm22b_rcvr_timeout_handling_next' into next
2013-05-10 09:59:30 +02:00
Stacey Sheldon
8ab50bca13
flashfs: use uintptr_t instead of uint32_t in flashfs API
2013-05-08 19:42:01 +02:00
Stacey Sheldon
99e61dd617
logfs: support multiple instances of logfs
...
Conflicts:
flight/pios/common/pios_flashfs_logfs.c
flight/pios/inc/pios_flashfs_logfs_priv.h
flight/tests/logfs/pios.h
flight/tests/logfs/pios_config.h
flight/tests/logfs/unittest.cpp
2013-05-08 19:28:11 +02:00
Werner Backes
938ed58918
Corrected timout calculation formula.
2013-05-06 14:20:53 +02:00
Werner Backes
bb87e6390e
Update ppm_fresh if we receive a new PPM packet in order to keep the
...
rfm22b receiver supervisor happy.
2013-05-06 12:00:58 +02:00
Richard Flay (Hyper)
fbc8bc698f
OP-936: Merges branch 'next' into hyper/OP-936_task-monitor-rework, fixes damage/conflicts,
...
and brings the callback scheduler into the fold.
+review OPReview-461
2013-05-06 19:11:14 +09:30
Werner Backes
0005d643ca
Merge branch 'D-Lite/OP-934_rfm22b_rcvr_timeout_handling' into D-Lite/OP-934_rfm22b_rcvr_timeout_handling_next
2013-05-06 08:23:22 +02:00
Brian Webb
ae8286e99a
OP-932: Fixes a bug that was preventing setting of Tx power on remote modem.
2013-05-06 01:03:15 +01:00
Richard Flay (Hyper)
a2d8544931
OP-931: adds -Wextra compiler option for the flight code, and makes the bazillion code changes required
...
to make the flight code compile again. Needs careful review, particularly all the fixes for the
signed vs unsigned comparisons.
+review OPReview-459
2013-05-05 16:32:24 +09:30
Brian Webb
dc4455ff68
OP-932: Fixes a bug that was preventing setting of Tx power on remote modem.
2013-05-04 17:24:40 +01:00
Brian Webb
57552f4cc9
OP-932: Changed the clock syncronization to happen only on packts transmitted from the coordinator to the remote modem. The Tx finished time of the previous packet is now sent in the packet header. This is compared to the Rx complete time of that packet on the remote modem to calcualte the difference between two modems. This eliminates the need for ACKing, so ACKs were removed for PPM and status packet.
2013-05-04 16:50:08 +01:00