1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-04 12:24:11 +01:00
Commit Graph

4739 Commits

Author SHA1 Message Date
James Cotton
4d6f810984 Make ADC driver play properly when not included 2011-11-01 03:22:48 -05:00
James Cotton
7eee6bf85b Create revolution board file 2011-11-01 03:22:19 -05:00
James Cotton
7ee4a0412c Work on the build process and include FreeRTOS 2011-11-01 03:20:25 -05:00
James Cotton
9607da9c62 Add some drivers to the device specific library for now until the exti problems
are fixed
2011-11-01 03:19:58 -05:00
James Cotton
2cc0b301ce Make some of the StdPeriph function calls const where appropriate 2011-11-01 03:18:59 -05:00
James Cotton
cdb6059752 Coyp over some of how the PH build system works 2011-11-01 01:36:52 -05:00
James Cotton
9bdd021b2e Make new Revolution target 2011-11-01 01:17:59 -05:00
James Cotton
3388843fb5 Merge in PixHawk F4 work 2011-11-01 01:09:55 -05:00
Oleg Semyonov
0aad612720 spektrum: the same type of DSM receivers is now allowed on both CC ports 2011-11-01 01:16:43 +02:00
Oleg Semyonov
a8b36ddd28 HwSettings: disable GPS and telemetry port speed updates at run-time
This is to be consistent across the HwSettings object fields which are
read on boot only by convention.
2011-10-31 23:04:17 +02:00
Oleg Semyonov
0116e6a007 spektrum: rework DSM2/DSMJ/DSMX driver for explicit DSMX resolution support
- both CC serial ports are now disabled by default (no telemetry);
- serial ports now have DSM2, DSMX (10bit) and DSMX (11bit) options;
- ReceiverGroups now have DSM (MainPort) and DSM (FlexiPort) options.

For DSM2 protocol there is an explicit resolution bit in the stream, so
the DSM2 should be selected. For DSMX there is no such bit, and user
should choose the resolution from the list configuring the spektrum port.
ReceiverGroups have single DSM option which is handled by the same driver.

Downside: this implementation saves received frame first, unrolls by the
end of frame. This should be ok, but may be improved by unrolling channels
on the fly in the rx callback.

Another minor difference is that a ChannelGroup is now bound to port:
DSM (MainPort) or DSM (FlexiPort). This was considered as acceptable
solution in order to not have 6 DSM options for each ChannelGroup and
even more in case of new DSM protocol variations.

Known problem: it is not possible to choose same protocols like
DSM2/DSM2 for two ports. It can be enabled by adding an exception to
common rule, though.

The DSMX throttle channel misbehavior (zero value) is not treated
specially yet. It should trigger the failsafe being out of bounds.
More info and data dumps are required to handle this properly.
2011-10-30 19:29:03 +02:00
Oleg Semyonov
51ec7da0a2 uavobjgenerator: enable '(' and ')' characters in object field names
Useful for names like "DSM (FlexiPort)" or similar. Will be removed
from symbolic indentifiers.
2011-10-30 11:34:47 +02:00
James Cotton
eb5e053a3e Input configuration: Make the sticks move during the limit setting. Makes the
UI more intuitive.
2011-10-27 08:35:20 -05:00
James Cotton
f019412209 Various tweaks to get the F4 working 2011-10-26 21:56:00 -05:00
James Cotton
d786c152e3 Merge F4 files from PixHawk branch 2011-10-26 18:23:35 -05:00
James Cotton
0f8ae1e076 Merge branch 'next' into ins
Conflicts:
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-10-26 13:18:44 -05:00
James Cotton
a8f0c5a622 Output widget: Add lines from Sambas to indicate which speeds alter channels
7-10.  Currently it doesn't indicate appropriately if those are actually
available...
2011-10-25 11:49:26 -05:00
Oleg Semyonov
a19bbba858 Merge branch 'next' into os/alternative_spektrum_driver 2011-10-25 11:55:05 +03:00
James Cotton
27bf2b383e Merge remote-tracking branch 'origin/james/remap_outputs' into next 2011-10-23 18:35:25 -05:00
Oleg Semyonov
4ed23dd891 Output Remapping: renamed PPM_SERVO option to PPM+Servo 2011-10-24 00:34:01 +03:00
Oleg Semyonov
b8d9d300c8 uavobjgenerator: enable '+' character in object field names
Useful for names like "Pitch+Roll" or similar. Will be removed
from symbolic indentifiers.
2011-10-24 00:23:03 +03:00
James Cotton
2050ce3fe1 Merge branch 'fix_input' into next 2011-10-23 15:29:12 -05:00
James Cotton
23150a48fe Merge remote-tracking branch 'origin/os/sbus_dynamic_malloc' into next 2011-10-23 15:26:26 -05:00
James Cotton
33fe8e0b9e History entry for remapping outputs 2011-10-23 15:21:40 -05:00
James Cotton
24d6ae731b Output Remapping: Added option to just use servo outputs on input lines but not
PPM.  This saves resources.  Good suggestion Os.  In this configuration we
could allow 12 channels of output but for now I'll leave it capped at 10 to
lessen resources on the mixer table.

With spektrum and camera stab enabled there was
1632 bytes heap remaining
180 bytes irq stack remaining
2011-10-23 15:21:40 -05:00
Oleg Semyonov
2a98a52f4c gps: include optional GPS module by default 2011-10-23 00:41:18 +03:00
Oleg Semyonov
f71361ca83 Merge branch 'next' into os/GPS-on-CopterControl_next_v2
Conflicts:
	flight/Modules/System/systemmod.c
2011-10-22 23:00:47 +03:00
Oleg Semyonov
58d0812309 sbus: better frame syncronization, some cosmetic changes
In the previous version the decoder could in rare cases get synced from
the middle of data stream in case of data byte equal to the S.Bus start
of frame (SOF) byte (wrong data will be rejected but it was not perfect).
Now it waits for the real start of frame and then checks the SOF byte.
2011-10-22 00:44:09 +03:00
Oleg Semyonov
62bca651d5 spektrum: alternative DSMx (DSM2/DSMJ/DSMX) driver
- does not glitch when used in 2-frame mode (DM9, 9503, etc)
- does NOT provides yet DSMX stream decoding - do NOT merge
- uses a bit more time in the interrupt, but frees 16 bytes of RAM.
  This is done to help decoding the weird DSMX stream which does not
  contain explicit resolution/frame/lost frames info and needs special
  processing (to be done yet).
2011-10-21 23:35:17 +03:00
Corvus Corax
167010e8a0 UAVTalk: Fixed bug in parser failing to handle length of multi-instanceobjects
UAVTalk (on GCS): Fixed a null pointer dereference when receiving in a NACK
2011-10-21 02:04:29 +02:00
Oleg Semyonov
92b81e3f88 sbus: refactor the code using unified PIOS RCVR driver structure
- allow more than one S.Bus receiver (needs hardware support)
- use dynamic memory allocation (frees around 72 bytes of RAM when unused)
2011-10-20 18:23:23 +03:00
James Cotton
a1cd6d580c During output testing disable the reverse checkbox 2011-10-20 08:39:30 -05:00
James Cotton
b6df727d1a Disable the input wizard while running simple calibration 2011-10-20 08:31:58 -05:00
James Cotton
5c04268205 Input configuration: Make sure during the 500 ms between detecting a channel
and requesting next nothing else can trigger.
2011-10-20 08:26:46 -05:00
James Cotton
fd96616c32 Delete large section of unused code 2011-10-20 07:51:00 -05:00
James Cotton
14fa739748 Add dialog box to indicate when test outputs won't work. 2011-10-20 07:20:23 -05:00
James Cotton
46aa8916c6 Fix segfault when selected motors 9 or 10. Also make labels show up in output
panel.
2011-10-20 06:56:56 -05:00
James Cotton
e0cc289de0 Remapping inputs to outputs: Drop S2 so there are ten outputs
Output 7 = S3 input
Output 8 = S4 input
Output 9 = S5 input
Output 10 = S6 input

Also fix bug that prevented them outputting signal
2011-10-20 06:28:07 -05:00
Corvus Corax
cb8d9c791c PiOS.posix: fixed missing defines in pios_config. removed platform specific inclde from Systemmod (pios_config.h gets included from pios.h) 2011-10-19 22:28:39 +02:00
Corvus Corax
b00751af91 Systemmod bugfix: UAVObject used without Initialization 2011-10-19 22:28:08 +02:00
Corvus Corax
e244581b18 PiOS.posix: bugfix in pios_udp com driver - data send loop 2011-10-19 13:37:35 +02:00
zedamota
cfbfbe1209 Only one output configuration at a time is now able to receive user input while the test outputs is enabled. 2011-10-16 00:57:59 +01:00
James Cotton
0193187d0c Make the UI support 10 output channels 2011-10-15 16:59:42 -05:00
James Cotton
9312610f3b Output: Enable two more channels to support octo + camera 2011-10-15 16:59:42 -05:00
James Cotton
ce7f424131 CC: When receiver port is set to PPM_SERVO use the spare pins as outputs 2011-10-15 16:59:42 -05:00
James Cotton
19c9528d80 CopterControl: Create structures to supply more output channels 2011-10-15 16:59:42 -05:00
zedamota
ca20187dcf Made UAVObject import disable the outputs test - see OP-587 2011-10-15 21:16:34 +01:00
James Cotton
08e077e8cb Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next 2011-10-13 23:16:56 -05:00
James Cotton
1d5364878a Update CameraStab icon with Muralha's new one 2011-10-13 23:16:09 -05:00
zedamota
8d5b310f1f Merge branch 'next' of ssh://git.openpilot.org:22/OpenPilot into next 2011-10-12 16:44:11 +01:00