James Cotton
4b35cdf0ef
OSX Simulation: Start populating the board and fw information
...
This will allow testing the tablet to know what type of UAVOs to
expect.
2012-10-07 13:53:19 -05:00
James Cotton
617de9c68b
Revert "Disable the FLASH_FREERTOS flag for revolution so that it doesn't try and use"
...
This reverts commit 7522bd07ba
2012-07-24 01:49:53 -05:00
James Cotton
7522bd07ba
Disable the FLASH_FREERTOS flag for revolution so that it doesn't try and use
...
vTaskDelay while erasing flash.
2012-07-23 09:42:53 -05:00
James Cotton
57a554f7ea
Enable the GPS UBX/NMEA support
2012-07-22 01:17:29 -05:00
James Cotton
9f93c9cbec
Get PIOS_GCSRCVR working on revo
2012-06-04 09:48:05 -05:00
James Cotton
dc7fe1bdd8
Try and get pios_gcsrcvr working on simulation and revo for testing RTH. Had
...
to include uavobjectmanager.h manually which was weird
2012-06-04 09:48:05 -05:00
James Cotton
8a6073fbaf
Merge remote-tracking branch 'revo/revo-next' into testing
...
Conflicts:
Makefile
flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/portable/GCC/Posix/port.c
flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/task.c
flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/portable/GCC/Posix/port_posix.c
flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
flight/Revolution/Makefile
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
ground/openpilotgcs/src/plugins/uploader/devicewidget.cpp
shared/uavobjectdefinition/taskinfo.xml
2012-05-28 09:13:26 -05:00
Corvus Corax
978ab5b96c
Merge remote branch 'origin/stac/etasv3' into revo-next
2012-05-28 12:56:27 +02:00
Stacey Sheldon
8d47dc1fe4
revo usb: apply recent hid+vcp decscriptor changes to revo
2012-05-27 21:35:13 -04:00
James Cotton
bbb14f5f14
Trying to get F4 PIOS_ADC working. Changed from previous implementation timed
...
by another timer to running continuously. May go back to the previous since no
need to get tons of data.
2012-05-15 03:19:44 -05:00
James Cotton
836e34a483
Change revo sensors to update at 500 Hz and make sure in all cases it waits for
...
the relevant queue to provide data. Also disable the quaternion stabilization
flag.
2012-05-12 13:12:56 -05:00
Sambas
dedbbec8f0
Make guidance support my Y6, also caused telemetry/usb RXdatarate go thru the roof (Guidance Warning). Almost impossible to change dataframe type to supported one with clean board.
...
USB interrupt fix.
Heap warning critical sizes backwards.
2012-05-07 12:51:07 -05:00
Stacey Sheldon
ad75e354eb
etasv3: Add etasv3 driver to revolution
2012-04-17 09:39:47 -04:00
James Cotton
09ce6e1ab4
Restore the original Revolution FreeRTOSConfig and make the osx simulation
...
scheduler not start high priority tasks when they are created because I can't
reliably get the starting task to stop (because currently in a swapping mutex I
think).
2012-04-03 09:16:30 -05:00
James Cotton
fbd8695d7d
Check in WIP for osx simulation
2012-04-03 09:16:30 -05:00
James Cotton
9d5dbe4bfe
Create stub for TCP connection of simulation
2012-04-03 09:16:28 -05:00
James Cotton
dfa39b59bf
Rename the pios_config file for simulation
2012-04-03 09:16:26 -05:00
James Cotton
76bdd09795
Rename the pios_config file for simulation
2012-04-03 09:16:26 -05:00
James Cotton
e79a6e292b
Add watchdog flag for simulated sensor task
2012-04-03 09:16:26 -05:00
James Cotton
5589ca60db
Check in compilation files for OSX simulation. Update to work on revolution
...
tree.
2012-04-03 09:16:26 -05:00
James Cotton
dd5a71c48d
Add watchdog flag for simulated sensor task
2012-04-03 09:16:25 -05:00
James Cotton
7ba32f8735
Check in compilation files for OSX simulation. Update to work on revolution
...
tree.
2012-04-03 09:16:24 -05:00
James Cotton
54880c83a0
Fix some task sizes and the memory limits
2012-04-03 03:42:30 -05:00
James Cotton
23625904c5
Remove the now unused ECEF and Rne fields from HomeLocation. Also reenable
...
calculation of the WMM and HomeLocation from the GPS code for revolution.
2012-04-03 03:42:28 -05:00
James Cotton
2f8049e20a
Update the bootloader hw version for the mpu6000 board and make the sensor code
...
and initialization respond appropriately. Enable hte L3GD20 and BMA180.
Let the board type determine which is used.
2012-03-22 00:41:37 -05:00
James Cotton
e4290d678b
Reenable the pressure sensor and other modules
2012-03-21 00:49:29 -05:00
James Cotton
720684c248
Flag to enable pressure/mag
2012-03-21 00:49:04 -05:00
James Cotton
a77a859e5c
Using some config switches to get this board up and running
2012-03-21 00:48:31 -05:00
James Cotton
bbbca319d8
Merge commit 'c4df0c0ceff8ba985bb20d815f27910b9e59d992' into revolution
2012-03-11 13:14:06 -05:00
Alessio Morale
c4df0c0cef
Support for port remapping on serial ports
...
Support for receiver configuration (PPM, PWM and DSM)
There are still problems with Flexi port (not sure if related to a problem with my board) and Uart/SBUS that has the input always inverted.
2012-03-11 18:38:49 +01:00
James Cotton
61d59828dc
Disable the new features if not revolution and set an error flag. Fixes
...
compilation errors.
2012-03-05 00:24:11 -06:00
James Cotton
e3df261213
Merge branch 'stac/revo-usb' into revolution
...
Conflicts:
flight/Revolution/System/pios_board.c
2012-03-02 13:00:13 -06:00
Stacey Sheldon
e2939dae2a
revo usb: Add support for USB to Revo
2012-02-07 02:25:31 -05:00
James Cotton
e434ab94a9
Enable SPI port for revolution to overo communications
2012-02-02 01:42:38 -06:00
James Cotton
80705cdba1
Flash: Because on CC/CC3D the flash is initialized before FreeRTOS is started
...
we cannot use the transaction lock or the delay while saving.
2012-01-26 11:50:05 -06:00
James Cotton
fe7b9a909a
LED: Update the LEDs on revo
2012-01-26 09:11:27 -06:00
James Cotton
9a12299074
Update the driver cfg structures for the EXTI changes. Make the drivers call
...
the pios_exti_init instead of their individual implementations.
2012-01-23 16:55:52 -06:00
James Cotton
cc0cbf0381
Enable IAP code on revolution now
2012-01-21 13:22:39 -06:00
James Cotton
bb0bfe0ae4
Merge branch 'next' into revolution3
...
Conflicts:
flight/Bootloaders/CopterControl/Makefile
flight/Bootloaders/PipXtreme/Makefile
flight/Bootloaders/Revolution/inc/pios_config.h
flight/CopterControl/Makefile
flight/INS/inc/pios_config.h
flight/Libraries/taskmonitor.c
flight/Modules/Altitude/altitude.c
flight/Modules/Attitude/attitude.c
flight/OpenPilot/Makefile
flight/OpenPilot/Makefile.posix
flight/OpenPilot/System/inc/pios_usb_board_data.h
flight/OpenPilot/System/inc/taskmonitor.h
flight/OpenPilot/System/pios_board.c
flight/OpenPilot/System/taskmonitor.c
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_bmp085.c
flight/PiOS/STM32F4xx/pios_iap.c
flight/PiOS/pios.h
flight/Revolution/System/inc/pios_config.h
flight/Revolution/System/inc/taskmonitor.h
flight/Revolution/System/taskmonitor.c
ground/openpilotgcs/src/plugins/serialconnection/serialplugin.cpp
shared/uavobjectdefinition/systemalarms.xml
shared/uavobjectdefinition/taskinfo.xml
2012-01-21 11:27:03 -06:00
James Cotton
cc47520baa
Checking ID on ST gyro works
2012-01-04 23:23:42 -06:00
James Cotton
0fbcf7723d
Code to disable all gyros. All modules now running.
2012-01-04 22:37:15 -06:00
James Cotton
0cc18e7dcf
Add files for new L3DG20 sensor
2012-01-04 20:33:54 -06:00
James Cotton
25dfb5463e
Add option to switch to using the MPU6000 accel instead of BMA180. Disabled by
...
default.
2011-12-29 02:08:13 -06:00
James Cotton
bf98630851
Add streaming the sensor data out of the serial port
2011-12-26 17:52:45 -06:00
James Cotton
43fa9e702e
Move DSM to Flexiport and enable GPS on GPS port. Currently GPS module locks
...
up though.
2011-11-28 09:11:13 -06:00
James Cotton
671c7537a0
Reorganize the pios_config.c file for revolution
2011-11-28 08:29:14 -06:00
James Cotton
8bbc767a4e
Get the pressure sensor working and reading into Revolution
2011-11-27 00:52:09 -06:00
James Cotton
e24c905ff7
F4 PiOS: Reimplement the RTC logic for F4
2011-11-26 22:13:57 -06:00
James Cotton
04f4afce46
Set idle load for revo
2011-11-26 15:52:04 -06:00
James Cotton
57b381235e
Init the timers and PWM in the board file
2011-11-26 02:19:56 -06:00
