James Cotton
96afe7cffd
Merge remote-tracking branch 'origin/stac/add-debug-consoles' into next
2012-10-12 08:07:44 -05:00
Stacey Sheldon
f0e0c2e79e
console: add debug console via USB CDC/VCP interface
...
The USB VCP Port has a new DebugConsole setting that
routes all output destined for PIOS_COM_DEBUG to the
emulated serial port.
To enable this in your build, you'll have to build like:
- make fw_coptercontrol_clean
- make fw_coptercontrol ENABLE_DEBUG_CONSOLE=YES
You can then output formatted text to the console
like this:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
PIOS_COM_SendFormattedString(PIOS_COM_DEBUG,
"foo is %u\r\n",
foo);
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
Please ensure that all of your debug output is
wrapped with these macros so that your debug
code doesn't bloat the firmware image.
2012-10-11 00:51:09 -04:00
Stacey Sheldon
75170177df
console: example usage of the debug console
2012-10-11 00:22:07 -04:00
Stacey Sheldon
6088c05946
console: add support for serial debug consoles
...
Serial ports now have a new HW setting called DebugConsole
which can be used to dump internal state to a serial port
for debug.
To enable this feature, you need to:
- make fw_coptercontrol_clean
- make fw_coptercontrol ENABLE_DEBUG_CONSOLE=YES
- configure one of the serial ports as DebugConsole in the GCS
- save settings
- power-cycle your board
Things to note:
- The console is at 57600,8N1.
- This is not currently configurable via the GCS.
- You can only have a single console enabled at a time.
2012-10-11 00:22:07 -04:00
Laura Sebesta
c2b49b6ef3
Merge branch 'kenz/cc_hitl_merge' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/gcscontrol/gcscontrolgadgetoptionspage.ui
ground/openpilotgcs/src/plugins/hitlnew/hitloptionspage.ui
ground/openpilotgcs/src/plugins/hitlv2/hitlv2optionspage.ui
2012-10-08 15:30:27 +02:00
Stacey Sheldon
157aeac9fc
Merge remote-tracking branch 'origin/stac/ppm-and-pwm-inputs' into next
2012-10-06 23:04:49 -04:00
sambas
9212bbeb20
DSMx bindmode delay was too long, satellite binding works again.
2012-10-07 12:09:42 +11:00
James Cotton
c8d9f89ea3
Default DIAG_TASK was on for PipX
2012-10-03 15:11:15 -05:00
James Cotton
897b07da02
Merge remote-tracking branch 'origin/kenz/diag_stack_split' into next
2012-10-02 14:20:08 -05:00
Stacey Sheldon
2f4b1e69dd
rcvr: Support PPM and PWM at the same time on CC
...
Adds a new mode for the receiver port (PPM+PWM) which
will allow simultaneous use of 1 pin for PPM and the
rest of the pins for PWM inputs.
2012-09-29 19:11:48 -04:00
James Cotton
b0d8487e27
PIOS_RFM22: Make the irq return false for the exti changes
2012-09-28 02:14:15 -05:00
James Cotton
8979c00fba
Merge branch 'exti_end_switching_isr' into next
2012-09-28 00:41:08 -05:00
James Cotton
519e3e2e3a
PIOS_EXTI: Make the line task macro now take in the xHigherTaskPriority variable name
2012-09-28 00:40:36 -05:00
James Cotton
f12d5c04fb
Merge remote-tracking branch 'origin/lilvinz/mpu6000_masked_locals_fix' into next
2012-09-27 14:43:54 -05:00
James Cotton
1ba40ee9b0
PIOS_EXTI: Make sure to use pdTRUE instead of true where appropriate.
2012-09-27 14:41:38 -05:00
James Cotton
1721479a12
Fix for vinz' merge to pios_mpu6000 exti changes
2012-09-27 14:34:11 -05:00
James Cotton
a021659b75
Merge remote-tracking branch 'origin/lilvinz/exti_end_switching_isr' into next
2012-09-27 14:31:16 -05:00
Laura Sebesta
8997df2438
Merge branch 'next' into kenz/diag_stack_split
...
Conflicts:
flight/Modules/Stabilization/stabilization.c
2012-09-27 19:29:23 +02:00
Laura Sebesta
4923655cd3
Added global flag for enabling all diagnostic tools.
2012-09-27 18:51:12 +02:00
Stacey Sheldon
215ff56fe8
usbcdc: fix handling of CDC SET_LINE_CODING request
...
The SET_LINE_CODING request contains data and must be
handled as such.
Previously, the only requests that had data were IN
requests. SET_LINE_CODING is an OUT request so it
required additional changes to support a new type of
data request.
2012-09-24 00:56:25 -04:00
Stacey Sheldon
5e37448814
usb: correct enum for CDC SET_CONTROL_LINE_STATE request
2012-09-24 00:53:52 -04:00
Stacey Sheldon
c056ac5261
usbcdc: don't assert on calls when CDC is not initialized
...
The CDC interface is always advertised in the FW USB
descriptors. It is NOT always enabled/initialized at
runtime. Specifically, it can be Disabled in HwSettings.
Previously, any CDC-related query that the host would send
resulted in an assert and a watchdog.
Now, a suitable return code indicating that the request is
unsupported is returned in this scenario.
2012-09-24 00:53:12 -04:00
Stacey Sheldon
14123069be
gdb: add gdb config file for CC BU image
2012-09-16 21:13:42 -04:00
Stacey Sheldon
368d57bc92
Merge remote-tracking branch 'origin/lilvinz/OP-300' into next
2012-09-16 16:05:25 -04:00
lilvinz
a6a7ed8157
pios_exti: added returnvalues to exti handlers which allows to use portEND_SWITCHING_ISR
2012-09-16 21:44:09 +02:00
Stacey Sheldon
05483e2a74
simposix: adapt simposix to addition of relay tuning
2012-09-16 15:40:47 -04:00
lilvinz
524cff1c40
pios_mpu6000: fixed masked locals mistake
2012-09-16 21:25:06 +02:00
lilvinz
718062ed6e
pios_led: added support for active_high connected leds
2012-09-16 18:19:27 +02:00
James Cotton
595083c982
PID: Fix small bug in setpoint weighting that had really ugly consequences
2012-09-12 00:07:17 -05:00
James Cotton
4717c376c0
Stabilization: For the inner loop call the setpoint shaping version so that
...
the derivative term can weight the sticks and gyros independently.
2012-09-11 13:21:53 -05:00
James Cotton
e4a167dca1
PID: Add a pid_apply_setpoint which takes in the setpoint and feedback term
...
This version allows performing setpoint weighting, currently on the derivative
component.
2012-09-11 13:21:19 -05:00
James Cotton
11b099b1ef
Stabilization: Add configuration terms for the derivative calculation to the UAVO and pass
...
them in to the PID system.
2012-09-11 12:29:38 -05:00
James Cotton
42bbd52d68
PID: Add a function to set the cutoff for the derivative term
...
Also contains a term for setting the deriative setpoint in the future
2012-09-11 12:27:41 -05:00
James Cotton
fa9a616b4c
PID: Add the 20 Hz low pass filter to the derivative term
2012-09-10 03:14:02 -05:00
James Cotton
9763a70364
Merge remote-tracking branch 'origin/igor/pidt1' into relay_tuning
...
Conflicts:
flight/Modules/Stabilization/stabilization.c
2012-09-10 03:10:26 -05:00
Igor Van Airde
8ca99739ed
Changed rate controller from PID to PIDT1 to improve flight stability.
...
Low pass on D-Term makes the D-Term usable to improve flight stability.
Affects rate and stabilize mode.
2012-09-09 13:07:25 +02:00
Werner Backes
2a4e135c81
Merge branch 'D-Lite/fix_CC3D_yawBias_correction' into next
2012-09-06 13:47:03 +02:00
Werner Backes
4803dfe99c
Fix: yaw bias correction wasn't applied on CC3D.
2012-09-06 13:13:58 +02:00
Stacey Sheldon
97882dbef9
pipx: ensure pipx BL image is padded to fill its bank
...
This padding is required in order to properly align all
of the sections in the EF images.
2012-09-05 22:17:04 -04:00
Stacey Sheldon
803e3c4d1e
ef: Add fwinfo to entireflash (EF) images
...
EF images were missing the firmware info blob that describes
which firmware is installed on the board. The EF image is now
padded out to fill the firmware bank and the info blob is
properly placed at the tail end of the firmware bank.
2012-09-05 21:45:59 -04:00
James Cotton
2f65fc1e8e
Merge branch 'next' into relay_tuning
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-04 10:43:04 -05:00
James Cotton
db083aa0e9
Merge branch 'android' into next
2012-09-02 19:19:23 -05:00
Kenz Dale
e123a88262
Added UAVO for airspeeds.
2012-08-29 16:04:47 +02:00
James Cotton
59d1367d37
Autotuning: Make the output also follow the hysteresis output
2012-08-24 22:45:45 -05:00
James Cotton
a3f1894cd7
Autotuning: Make the estimator require the value to toggle above and below the hysteresis level.
2012-08-24 21:33:08 -05:00
James Cotton
8babe5d8a4
Autotuning: Increase the measurement time to 30 seconds.
2012-08-24 21:32:11 -05:00
Laura Sebesta
929bf73504
Missed adding a diagnostics refactor to the commit.
2012-08-24 12:04:55 +02:00
Laura Sebesta
f2ffd1fb99
Changed DIAGNOSTICS flag to be individual to each module instead of global.
...
The upshot is the stack usage monitor can be turned on at a lower RAM threshold.
2012-08-24 12:04:05 +02:00
a*morale
d8ea84cdf1
Fix output power selection from the configured value at startup
2012-08-21 18:51:45 +02:00
Stacey Sheldon
2d0e4944d3
Merge remote-tracking branch 'origin/stac/actuator-task-cpu-optimization' into next
2012-08-20 19:13:39 -04:00
