1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
Commit Graph

121 Commits

Author SHA1 Message Date
Laura Sebesta
8997df2438 Merge branch 'next' into kenz/diag_stack_split
Conflicts:
	flight/Modules/Stabilization/stabilization.c
2012-09-27 19:29:23 +02:00
Laura Sebesta
4923655cd3 Added global flag for enabling all diagnostic tools. 2012-09-27 18:51:12 +02:00
James Cotton
2f65fc1e8e Merge branch 'next' into relay_tuning
Conflicts:
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/taskinfo.xml
2012-09-04 10:43:04 -05:00
Laura Sebesta
f2ffd1fb99 Changed DIAGNOSTICS flag to be individual to each module instead of global.
The upshot is the stack usage monitor can be turned on at a lower RAM threshold.
2012-08-24 12:04:05 +02:00
James Cotton
097ae637bf Remove the TCHAIN_PREFIX flag from the OSX Makefile. No clue how that got
merged in.
2012-08-06 16:54:55 -05:00
James Cotton
f247443d64 Clean up the logging somewhat 2012-08-06 16:54:52 -05:00
James Cotton
9ce7d9b4ac Add UAVOs for relay tuning 2012-08-03 09:37:44 -05:00
Werner Backes
7ef7b621d7 Reenable PIOS_GPS_SETS_HOMELOCATION on Revo.
Change-Id: I5a5e2ec0deb4241faad23f6fead5036b039bfbf9
2012-07-11 23:37:03 +02:00
Werner Backes
19a9cd03c2 Introduced GPSVelocity UAVObject
Conflicts:

	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-07-10 16:23:10 +02:00
Werner Backes
10351e61d4 Revert "Changed GPS port to be rx/tx instead of rx only"
This reverts commit e2a35d1f4c.
2012-07-10 12:10:17 +02:00
Werner Backes
e2a35d1f4c Changed GPS port to be rx/tx instead of rx only 2012-07-10 11:01:46 +02:00
Werner Backes
0424172398 Better separation between UBX and NMEA parser
Make GPS protocol a user selectable option
Support for UBX protocol on CopterControl
2012-07-10 11:01:41 +02:00
James Cotton
5e01617cbd Merge branch 'next' into MikeL
Conflicts:
	ground/openpilotgcs/src/plugins/config/airframe.ui
	ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
	ground/openpilotgcs/src/plugins/config/configoutputwidget.h
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.h
2012-06-06 11:58:06 -05:00
Mike LaBranche
bf591ebe45 Merge branch 'next' into MikeL
Conflicts:
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/Modules/OveroSync/inc/overosync.h
	flight/Modules/Sensors/inc/sensors.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/Revolution/System/inc/pios_config.h
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 15:38:57 -07:00
James Cotton
e8cf606f16 Add the chip size to the flashfs configuration (should probably go in the chip
configuration)
2012-06-02 11:00:42 -05:00
James Cotton
e82323af32 Make revolution work with the FreeRTOS queue based MPU6000 driver 2012-04-03 03:41:52 -05:00
James Cotton
2f8049e20a Update the bootloader hw version for the mpu6000 board and make the sensor code
and initialization respond appropriately.  Enable hte L3GD20 and BMA180.
Let the board type determine which is used.
2012-03-22 00:41:37 -05:00
James Cotton
e7ca02c038 Initialize mag before mpu6000. Seems more reliable but I don't know why. 2012-03-21 03:42:15 -05:00
James Cotton
e4290d678b Reenable the pressure sensor and other modules 2012-03-21 00:49:29 -05:00
James Cotton
720684c248 Flag to enable pressure/mag 2012-03-21 00:49:04 -05:00
James Cotton
a77a859e5c Using some config switches to get this board up and running 2012-03-21 00:48:31 -05:00
James Cotton
6b88a278b3 Disable overosync by default. It was triggering event system warnings due to
the extra updates from altholdsmoothed.  Increase queue size when reenabled.
Also AltHold is is trigger warnings because other tasks starve it during
startup.
2012-03-21 00:29:09 -05:00
James Cotton
a319a6b14c Flags to disable mag/baro init 2012-03-14 22:35:09 -05:00
James Cotton
c8d1534b87 Convert inline functions to static, let the compiler figure it out. Also some
formatting since code was probably written with tabstop = 2 :)
2012-03-11 13:18:08 -05:00
James Cotton
bbbca319d8 Merge commit 'c4df0c0ceff8ba985bb20d815f27910b9e59d992' into revolution 2012-03-11 13:14:06 -05:00
Alessio Morale
c4df0c0cef Support for port remapping on serial ports
Support for receiver configuration (PPM, PWM and DSM)
There are still problems with Flexi port (not sure if related to a problem with my board) and Uart/SBUS that has the input always inverted.
2012-03-11 18:38:49 +01:00
James Cotton
690f1b5f29 Enable camera stabilization 2012-03-08 01:37:34 -06:00
Stacey Sheldon
e2ab662b5d sysclk: pass in correct definition for HSE_VALUE
The code in RCC_GetClocksFreq() uses HSE_VALUE to determine
the tick rate of the SYSCLK.  This in turn is used by the
code in PIOS_DELAY_* to compute delays.

ST Library defaults this to 25MHz for the F4.  Our board
actually has an 8MHz oscillator so delays were way off.

Mostly affects the bootloaders since most FW code uses RTOS
delays rather than busy-waiting using PIOS_DELAY_*.
2012-03-07 19:52:54 -05:00
James Cotton
61d59828dc Disable the new features if not revolution and set an error flag. Fixes
compilation errors.
2012-03-05 00:24:11 -06:00
Alessio Morale
637af911ef Merge remote-tracking branch 'origin/james/revolution' into amorale/revolution 2012-03-04 12:31:13 +01:00
Stacey Sheldon
0684a42fac build: use board-specific JTAG interface for openocd
Removes hard-coding of JTAG interface config in the
<board>_program make macros.

This allows the use of STLINKv2 for F4 boards while
continuing to use the FOSS JTAG revB on F1 boards.
2012-03-03 08:43:01 -05:00
Alessio Morale
226cd09a13 Merge branch 'james/revolution' into amorale/revolution 2012-03-02 21:24:56 +01:00
James Cotton
e3df261213 Merge branch 'stac/revo-usb' into revolution
Conflicts:
	flight/Revolution/System/pios_board.c
2012-03-02 13:00:13 -06:00
Alessio Morale
e8880d7271 Removed duplicate InitClock for tim_4 2012-03-02 00:55:50 +01:00
James Cotton
4717af1afd Swap telemetry port and gps ports back 2012-02-12 13:55:52 -06:00
James Cotton
34ca5777dd Kalman filter for altitude 2012-02-11 21:08:19 -06:00
James Cotton
d8f0494e57 Merge branch 'revolution' into revolution_overo 2012-02-11 20:02:20 -06:00
Alessio Morale
22b211167c Ported pios_iap.c to F4
restored failed boot count check on pios_board.c for revo
2012-02-11 13:49:32 +01:00
James Cotton
49a03a868b Merge branch 'altitudehold' into revolution_overo
Conflicts:
	flight/OpenPilot/UAVObjects.inc
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
	flight/Revolution/Makefile
	flight/Revolution/ins.c
2012-02-07 23:00:29 -06:00
Stacey Sheldon
e2939dae2a revo usb: Add support for USB to Revo 2012-02-07 02:25:31 -05:00
Stacey Sheldon
8b73ae7d16 remove trailing whitespace 2012-02-07 02:25:31 -05:00
Stacey Sheldon
b8c16fe7a5 hw defs: move misc defines and non-const data out of board_hw_defs.c
The board_hw_defs.c file should only contain static
const declarations that only describe the hardware.

All other non-const variables should be put into one
of the pios_board.c files.
2012-02-07 02:25:31 -05:00
James Cotton
dbcb499d7f Add object to monitor the overo link status. Current just records the bytes/s
being sent and the connected status (based on sending more than 500 bytes per
second)
2012-02-06 09:37:31 -06:00
James Cotton
5b2376dbee Remove the semaphore for buffer swapping and make this occur during the receive
ISR.  This leads to a possible condition where a copy is taking place in
userspace and then a buffer swap interrupts it.  However, the copy should
always finish before the SPI DMA slave catches up to that place in memory at 10
MHz.

This fixes a common condition where the userspace task (low priority) was not
swapping buffers in time from user space and logs were corrupted.
2012-02-06 08:21:24 -06:00
James Cotton
95abb56d5e Added module to send updates out the SPI port 2012-02-02 09:19:25 -06:00
James Cotton
e434ab94a9 Enable SPI port for revolution to overo communications 2012-02-02 01:42:38 -06:00
James Cotton
13447ac907 Fix the MPU6000 implementation 2012-01-28 00:21:58 -06:00
James Cotton
80705cdba1 Flash: Because on CC/CC3D the flash is initialized before FreeRTOS is started
we cannot use the transaction lock or the delay while saving.
2012-01-26 11:50:05 -06:00
James Cotton
69dc5abf0c Flash: Get rid of some defines and directly reference the cfg structure 2012-01-26 10:56:26 -06:00
James Cotton
fe7b9a909a LED: Update the LEDs on revo 2012-01-26 09:11:27 -06:00