Brian Webb
c76ee7de9d
OP-932 Fixes the failsafe that detects when the Rx modem loses sync with the Tx modem. This was not working on one-way mode.
2013-06-30 16:08:50 -07:00
Brian Webb
491e5fe685
Adds a failsafe on PPM output on OPLink that kicks in when the link goes down. Also updates all air datarate settings and adds new 64 and 100 kbps modes.
2013-06-29 15:00:38 -07:00
Brian Webb
bab69401b9
OP-932 Allows configuring the Revo as coordinator.
2013-06-27 19:55:01 -07:00
Brian Webb
6386b12026
OP-932 Fixes raw serial on UART and USB VCP.
2013-06-27 19:16:01 -07:00
Brian Webb
d5f16faaec
OP-932 Fixes the datarate used on PPM only mode, and fixes failsafe on PPM output on OPLM.
2013-06-26 20:11:39 -07:00
Brian Webb
caa8d3e70e
OP-932 Forces one-way to be set when PPM only is configured.
2013-06-26 18:02:08 -07:00
Brian Webb
2aea2342ab
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
2013-06-26 18:01:54 -07:00
Brian Webb
b25ba75fd9
OP-932 Removed obsolete include of pios_rfm22b_rcvr from pios.h.
2013-06-26 18:00:22 -07:00
Brian Webb
44a0266e41
OP-932 Adds claiming of the SPI bus in the OPLink channel change function.
2013-06-26 18:00:02 -07:00
Brian Webb
56a60f2983
OP-932 Updates the 19.2 kbps datarate using the spreadsheet.
2013-06-26 17:59:49 -07:00
Brian Webb
61c453f6ff
Removes several of the air datarate settings, and fine tunes the calculation of the max packet length from the datarate and packet time. 9600, 19200, 36400, and 57600 modes tested. Tested 19200 in one-way mode for PPM only.
2013-06-26 17:59:33 -07:00
Brian Webb
f8d60e6dee
OP-932 Adds additional thread and UAVTalk connection to the telemetry module that reads from the uart/radio link on the Revo. This allows the Revo to read OAVObjects over both the uart/radio link and the USB link at the same time. Unfortunately, there's no way to know which link to send UAVObjects out on, so all UAVObjects go to the USB port if USB is connected. This allows UAVObjects to be received from the OPLink radio, even when USB is connected.
2013-06-26 17:58:02 -07:00
Brian Webb
cdd51537f1
Fixes the 9600 bps air datarate for the RFM33B modem.
2013-06-26 17:57:46 -07:00
Brian Webb
fc0328a3cd
OP-932 Adds working one-way mode to the OPLink radio connection. In this mode, packets will only flow from the ground side (coordinator modem) to the flight side modem.
2013-06-26 17:57:32 -07:00
Brian Webb
774a74884a
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
2013-06-26 17:57:11 -07:00
Brian Webb
8c370df319
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
2013-06-26 17:56:56 -07:00
Brian Webb
12c8ef2e3a
OP-932 Changes the UAVTalkRelayInputStream function to UAVTalkRelayPacket to allow for not relaying a packet on error, etc. Also adds a function to get the object ID out of the current packet (UAVTalkGetPacketObjId). These functions are used by the OPLink.
2013-06-26 17:56:40 -07:00
Brian Webb
08efc8d152
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
2013-06-26 17:56:20 -07:00
Brian Webb
7c10623615
OP-932 Adds a semaphore to PPM input to signal when a new frame has been received. This can be used to process a new frame with as low a latency as possible.
2013-06-26 17:56:10 -07:00
Brian Webb
ac75af55c1
OP-932 Moves the PIOS_PPM_OUT_Set function from pios_ppm_out_priv.h to pios_ppm_out.h
2013-06-26 17:55:56 -07:00
Oleg Semyonov
7f84307714
OP-997: fix release notes. This change was reverted but not documented
2013-06-22 18:29:40 +02:00
Alessio Morale
57c8cd7872
Merge branch 'amorale/OP-1019_simple_altitudehold' into next
2013-06-21 17:16:24 +02:00
Alessio Morale
d2893fd32b
OP-1019 fix sanitychecks and other uavo definition sanity checks for the newly defined altitudevario mode
2013-06-20 19:39:19 +02:00
Werner Backes
e5b68382e0
Keep TODO comment.
2013-06-20 14:35:40 +02:00
Werner Backes
0f5e354f99
Removed first occurance of accel_err scaling. We don't want to do this
...
twice.
2013-06-20 12:42:22 +02:00
Alessio Morale
5318c20de6
OP-1019 add a simple altitude hold
2013-06-20 11:27:45 +02:00
Alessio Morale
f41f7ade66
Merge remote-tracking branch 'origin/amorale/OP-1009_reset_gyrobias' into next
2013-06-18 20:39:55 +02:00
Alessio Morale
5cc3645b96
Uncrustify
2013-06-18 20:23:46 +02:00
Alessio Morale
54af41765e
OP-1009 missing initialization on a previously static variable.
...
+review OPReview-516
2013-06-17 21:42:30 +02:00
Alessio Morale
b012d55f26
OP-1009 fix comments and fixes review
...
+review OPReview-516
2013-06-17 21:01:24 +02:00
Alessio Morale
2b232ae155
Fix bootloader usb issues caused by USB reconnection fixes.
...
Issues were related to missing usb detection and broken communication while updloading fw.
They are now skipped in NON FreeRTOS mode (aka bootloader).
+review OPReview
2013-06-17 20:24:07 +02:00
Alessio Morale
d5a77fb525
OP-1009 prevent gyro zeroing from raise an alarm when arming
2013-06-15 17:28:30 +02:00
Alessio Morale
517c331dd4
OP-1012 fixed speeds to make easy to distinguish flash rates
2013-06-15 17:27:48 +02:00
Alessio Morale
f2431b2868
GPS module is builtin so there is no way to shut the gps alarm when gps is not used.
...
This change does remove any alarm when no port is configured for gps.
Things depending on GPS will continue to raise their own alarm when no gps data are feed.
2013-06-15 16:39:29 +02:00
Alessio Morale
354fdf4bdf
OP-1012 implement several messages for alarm led
2013-06-15 16:38:53 +02:00
Alessio Morale
49da1aca86
OP-1009 Redo gyro zero in Complementary after calibration parameters changes
2013-06-15 16:22:24 +02:00
Alessio Morale
3c39b049d6
Fixed wrong deadband range for AH
2013-06-11 21:17:17 +02:00
Alessio Morale
04326e2386
Merge remote-tracking branch 'origin/amorale/OP-999_ah_failsafe' into next
2013-06-11 15:39:43 +02:00
Alessio Morale
ad123a2761
Merge remote-tracking branch 'origin/amorale/OP-980_connection_reliability_issue' into next
2013-06-11 15:39:34 +02:00
Alessio Morale
2c0f7794a9
Merge remote-tracking branch 'origin/amorale/OP-997_revolution_settings_to_ext_flash' into next
2013-06-11 15:39:13 +02:00
Alessio Morale
f767d64f0c
OP-980 Remove the timeout logic as it causing troubles with windows
...
platform
2013-06-11 10:27:32 +02:00
Alessio Morale
c1a1c04ad8
OP-999 trigger a failsafe condition in AH module when throttle is below 0 for more than 200ms
...
+review OPReview
2013-06-10 23:48:08 +02:00
Brian Webb
789930db45
Moved PIOS_TASK_MONITOR_Initialize to before EventDispatcherInitialize. The event dispatcher creates a task that registers itself with the task monitor. It is unlikely that the task will start before the task monitor is initialized, but not impossible (at least on the F4 targets, I don't think).
2013-06-09 20:16:40 -07:00
Corvus Corax
6f59c49506
just uncrustification
2013-06-09 22:09:04 +02:00
Alessio Morale
e9b3ee52f3
OP-997: add fields to SystemStatsUavo to monitor storage status
2013-06-09 19:20:00 +02:00
Alessio Morale
1cb69e6a0e
OP-997: Revert Revolution settings storage to external flash to prevent freezes during sector erase/garbage collection
2013-06-09 19:17:12 +02:00
Alessio Morale
87db5d30b0
OP-980 change how the semaphore is used on PIOS_USB_CheckAvailable to prevent deadlocks
2013-06-09 16:14:44 +02:00
Alessio Morale
6d71d92860
Merge remote-tracking branch 'origin/amorale/OP-990_revo_bias_with_shaken_startup' into next
2013-06-09 09:10:33 +02:00
Alessio Morale
0f28920e5f
Merge remote-tracking branch 'origin/amorale/OP-988_gps_not_configured_alarm' into next
2013-06-09 09:09:44 +02:00
Alessio Morale
107b930573
Merge remote-tracking branch 'origin/amorale/OP-980_revolution_usb_reconnect' into next
2013-06-09 09:07:24 +02:00
