James Cotton
96afe7cffd
Merge remote-tracking branch 'origin/stac/add-debug-consoles' into next
2012-10-12 08:07:44 -05:00
Stacey Sheldon
f0e0c2e79e
console: add debug console via USB CDC/VCP interface
...
The USB VCP Port has a new DebugConsole setting that
routes all output destined for PIOS_COM_DEBUG to the
emulated serial port.
To enable this in your build, you'll have to build like:
- make fw_coptercontrol_clean
- make fw_coptercontrol ENABLE_DEBUG_CONSOLE=YES
You can then output formatted text to the console
like this:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
PIOS_COM_SendFormattedString(PIOS_COM_DEBUG,
"foo is %u\r\n",
foo);
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
Please ensure that all of your debug output is
wrapped with these macros so that your debug
code doesn't bloat the firmware image.
2012-10-11 00:51:09 -04:00
Stacey Sheldon
6088c05946
console: add support for serial debug consoles
...
Serial ports now have a new HW setting called DebugConsole
which can be used to dump internal state to a serial port
for debug.
To enable this feature, you need to:
- make fw_coptercontrol_clean
- make fw_coptercontrol ENABLE_DEBUG_CONSOLE=YES
- configure one of the serial ports as DebugConsole in the GCS
- save settings
- power-cycle your board
Things to note:
- The console is at 57600,8N1.
- This is not currently configurable via the GCS.
- You can only have a single console enabled at a time.
2012-10-11 00:22:07 -04:00
Laura Sebesta
c2b49b6ef3
Merge branch 'kenz/cc_hitl_merge' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/gcscontrol/gcscontrolgadgetoptionspage.ui
ground/openpilotgcs/src/plugins/hitlnew/hitloptionspage.ui
ground/openpilotgcs/src/plugins/hitlv2/hitlv2optionspage.ui
2012-10-08 15:30:27 +02:00
Stacey Sheldon
2f4b1e69dd
rcvr: Support PPM and PWM at the same time on CC
...
Adds a new mode for the receiver port (PPM+PWM) which
will allow simultaneous use of 1 pin for PPM and the
rest of the pins for PWM inputs.
2012-09-29 19:11:48 -04:00
James Cotton
684620dce6
Merge remote-tracking branch 'origin/hyper/uavobjectparser-tweaks' into next
...
Conflicts:
shared/uavobjectdefinition/taskinfo.xml
2012-09-27 13:49:34 -05:00
PT_Dreamer
43f85d9617
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2012-09-25 10:44:32 +01:00
PT_Dreamer
3d5381893b
GCS-Changed relaytuning uavo to gcs readOnly
2012-09-24 22:47:18 +01:00
PT_Dreamer
fb073059ad
GCS-Use uavo definition hash to check for compatability
...
Unfortunately had to change the iap object.
2012-09-17 17:08:15 +01:00
James Cotton
11b099b1ef
Stabilization: Add configuration terms for the derivative calculation to the UAVO and pass
...
them in to the PID system.
2012-09-11 12:29:38 -05:00
James Cotton
4d87af38b6
Make sure the orders of the UAVOs match
2012-09-10 10:52:05 -05:00
Richard Flay (Hyper)
53e2db3b24
Added a backwards-compatible way to specify UAVO field element names and options as lists of child elements of the field element. Added the ability to specify that a field is a clone of another field, just with a different name
2012-09-08 14:41:55 +09:30
James Cotton
2f65fc1e8e
Merge branch 'next' into relay_tuning
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-04 10:43:04 -05:00
Kenz Dale
e123a88262
Added UAVO for airspeeds.
2012-08-29 16:04:47 +02:00
James Cotton
8d70a632fe
Autotune: Increase the default step size for autotuning.
2012-08-24 23:06:41 -05:00
James Cotton
a3f1894cd7
Autotuning: Make the estimator require the value to toggle above and below the hysteresis level.
2012-08-24 21:33:08 -05:00
David Ankers
2f168323d2
Default to telem on main port, no reasons against this unless I am being
...
stupid (very possible).
2012-08-22 07:12:47 +10:00
David Ankers
8d5c1e4253
Change Default GPS protocol to UBX
2012-08-22 05:11:28 +10:00
PT_Dreamer
fa465c54a8
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/input.ui
2012-08-21 14:46:16 +01:00
Stacey Sheldon
63c167c183
taskinfo: also track Event thread's stack usage and CPU utilization
...
The event dispatcher thread is started differently than most other
threads so it was missed in the taskinfo tracking information. Now
it's also included.
2012-08-11 18:47:03 -04:00
Stacey Sheldon
b505602c15
Merge remote-tracking branch 'origin/stac/rc-tx-joystick-emulation' into next
2012-08-11 11:21:18 -04:00
James Cotton
7cca5696a2
Merge remote-tracking branch 'origin/pt/boardbased_ui_limits' into next
2012-08-08 14:11:24 -05:00
James Cotton
06a6e367b0
Merge remote-tracking branch 'origin/hyper/OP-661' into next
2012-08-08 13:49:48 -05:00
Stacey Sheldon
ef0c12b1b6
hid joystick: emulate a USB HID joystick using RC Transmitter
...
Adds a new RCTransmitter setting for the USB HID interface which
emulates a USB HID joystick. The scaled RC receiver channels
from any RCVR protocol are passed through to the various emulated
joystick controls.
The main use for this feature is to allow you to use your own RC
transmitter with any RC simulator on a PC.
This is known to work with CRRCsim but should work with any simulator
that supports joystick input.
2012-08-05 21:45:27 -04:00
PT_Dreamer
df61d33f66
GCS- Added the ability to have more than 1 ui limit per index
2012-08-03 18:57:24 +01:00
James Cotton
ccbbda1b51
Make default tuning mode Attitude to make it easier on people like me :)
2012-08-03 12:41:00 -05:00
PT_Dreamer
4d19062059
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into pt/boardbased_ui_limits
2012-08-03 18:14:51 +01:00
James Cotton
652647fc87
Make autotuning module optional
2012-08-03 09:37:46 -05:00
James Cotton
2ccd6605a4
Now the stabilization refactor is in we can make swapping between tuning the
...
system in rate or attitude mode software configurable.
2012-08-03 09:37:45 -05:00
James Cotton
28539a80d1
Change default tuning settings
2012-08-03 09:37:45 -05:00
James Cotton
7ea14ecc22
Track the output gain instead of amplitude so the measured values are
...
consistent if the settings are changed afterwards.
2012-08-03 09:37:45 -05:00
James Cotton
5c00451c9e
Remove unused value field from the relaytuning object
2012-08-03 09:37:45 -05:00
James Cotton
52ffec0be4
Increase the initial tuning amplitude to 0.15
2012-08-03 09:37:45 -05:00
James Cotton
dfd1aceb06
More work on autotune from GCS
2012-08-03 09:37:45 -05:00
James Cotton
a9af53b4f3
Create new autotuning module which rotates through the axes for autotuning and
...
then computes new stabilization settings.
2012-08-03 09:37:44 -05:00
James Cotton
4ac8df6aa8
Make the system perform an online estimate of the period and amplitude of the
...
oscillation during relay tuning
2012-08-03 09:37:44 -05:00
James Cotton
17a0d3ebb4
Add a relay stabilization mode
2012-08-03 09:37:44 -05:00
James Cotton
9ce7d9b4ac
Add UAVOs for relay tuning
2012-08-03 09:37:44 -05:00
James Cotton
6948f1dc41
Merge remote-tracking branch 'origin/master' into next
...
Conflicts:
package/winx86/translations/strings_de.nsh
2012-08-03 09:35:18 -05:00
PT_Dreamer
205d370eec
GCS-Made the UI limits board specific
2012-08-02 16:34:48 +01:00
Richard Flay (Hyper)
56647f5409
Fix for OP-661: error messages in GCS log due to obsolete AHRSComms and SDCard related alarms. Change also disables obsolete SDCard support on the flight side of CC and PipX
2012-07-31 11:07:07 +09:30
James Cotton
9d82538a09
If we set FirmwareIAPObj to update on change then initial object retrieval will
...
force it to be fetched before emitting the autopilotConnected signal.
2012-07-27 16:16:16 -05:00
Stacey Sheldon
eafd525323
Merge remote-tracking branch 'origin/D-Lite/ubx-parser-next' into next
2012-07-21 14:22:10 -04:00
Werner Backes
b6ebee403d
Removed reference to AHRSCommsModule
2012-07-19 20:48:35 +02:00
Brian Webb
3fabdb9963
Fixed conflicted merge with origin/next.
2012-07-11 19:25:05 -07:00
Werner Backes
0a7fa8dc5f
Revert "Removed ECEF and RNE flields to be compatible with Revo"
...
This reverts commit feb063dda7
2012-07-10 23:06:42 +02:00
Werner Backes
feb063dda7
Removed ECEF and RNE flields to be compatible with Revo
2012-07-10 16:40:58 +02:00
Werner Backes
19a9cd03c2
Introduced GPSVelocity UAVObject
...
Conflicts:
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-07-10 16:23:10 +02:00
Werner Backes
94b610c882
Added missing gpssettings.xml
2012-07-10 11:01:42 +02:00
PT_Dreamer
f6e4318c2a
GCS- Don't add category to object definition yet.
2012-07-09 15:21:20 +01:00
