sambas
7859a130e8
Fixed bug that caused Object Browser to crash
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1369 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 08:59:18 +00:00
pip
78868216ca
Fixed UART-1 structure definition error (pios_usart_cfg pios_usart_serial_cfg)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1368 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 08:59:00 +00:00
cwabbott
e27adf700b
Fix posix and win32 makefiles for recent UAVObject changes.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1367 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 00:59:12 +00:00
peabody124
5662d85c4e
OP-120 AHRS: Tightened up the communication protocol so it runs more quickly. Looks ok in gdb but GCS not crashing right now (rendering error) so I can't test it properly.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1366 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 00:21:54 +00:00
corvus
9bb085b7fc
Documentation: Added Flowchart for HiTL mode
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1365 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 23:05:12 +00:00
peabody124
8897c441fa
OP-118 AHRS: Added AHRSCalibration object and messages associated with that to AHRS. Also made AHRS run calibration only when requested. We will create a GCS plugin that runs through computing the calibration settings. To compute the variances on the AHRS set the measure variances to true, wait ten seconds, then set it to false to read it back.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1363 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 21:46:02 +00:00
patrick
564a68e825
PipBee: Updating project files to fix compile errors. Routine just toggles each LED successively. There is a known error when enabling the PIOS_COM_Init(); or more specifically PIOS_USART_Init(); which blocks at some point when called. This may be due to the pios_board.c defines which I will check later today.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1361 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 20:01:37 +00:00
pip
227b389e99
Attempt 2 - trying to get LEDs to flash
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1359 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 18:14:18 +00:00
pip
519ce846ee
Just trying to get a simple 'Hello World' program going (LED flashing)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1358 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 17:14:34 +00:00
stac
b36d251bd9
ahrs: remove debug code in attitude handler
...
Debug code was previously using the q4 element
in the attitude message to encode a cycle counter
to measure performance on the AHRS. This is no
longer valid.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1357 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:23:14 +00:00
stac
26e257d340
spi: slow down OP <-> AHRS spi link
...
Issues have been reported with CRC errors
on the SPI link between the OP and AHRS
boards. Slowing the link down eliminates
the errors in my testing.
If we speed this link back up in the future,
further investigation will be required to
diagnose the source of the CRC errors.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1356 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:20 +00:00
stac
635df28c34
GPSPosition: Add new UAVObject for GPSPosition
...
This object is not yet populated or used. This
will soon hold the raw position data from the GPS
receiver. PositionActual will be converted to
hold the computed position from the AHRS.
Contents of this object are still subject to change.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1355 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:18 +00:00
stac
7f85143bd2
OPModule: updated GPSPosition object
...
Updated GPSPosition module to reflect the planned use
of a fixed a fixed point encoding for lat/lon.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1354 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:16 +00:00
stac
f388deef34
hmc5843: standardize line endings
...
This file had mixed line endings. Now they're all the same.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1353 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:14 +00:00
stac
a960d6e1b1
GPS: fix typo desimal->decimal throughout
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1352 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:12 +00:00
stac
7b2111e512
baroaltitude: rename AltitudeActual to BaroAltitude
...
This is to align the object names to matches the UAVObject
architecture doc. No functional changes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1351 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:10 +00:00
stac
47c36b3da0
i2c: fix error in FSM for restarted reads
...
The transition from the ADDR state to the read state
was broken for non-final reads. The FSM diagram was
also wrong for this transition.
Since reads are always the last transaction in a sequence
in our current usage, this doesn't actually fix any known
bugs.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1350 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:06 +00:00
stac
98822bff98
i2c: force bus free on warm starts
...
Since the i2c bus is bidirectional, there are certain
states (eg. part way through a read) where the slave
device is in control of driving the SDA line.
On a cold start (power on), the slave devices are all
quiescent and will not drive the bus. However, on a warm
start (eg. watchdog or jtag restart), it is possible that as
the CPU boots, the slave device may be holding the SDA line
low. This is a bus busy condition and will prevent the I2C
bus master in the CPU from being able to seize the bus during
init.
The fix for this is to clock the i2c bus sufficiently to ensure
that the the slave device finishes its transaction and releases
the bus.
Once the slave has released the bus, the bus master can properly
initialize and assert a STOP condition on the bus.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1349 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:02 +00:00
peabody124
ba4dc14cea
OP-124 Flight: Added fields to the AHRSStatus to track failures of each of the SPI message types.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1347 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 09:21:39 +00:00
peabody124
bb79ba66fa
OP-119 AHRS: Converted the big data structures for the WMM calculation to be allocated on the stack, which forced a dependency on FreeRTOS :-( but keeps things on the heap. Also changed the HomeLocation object to include a Set field. When this is false, OP will try and update it whenever it gets a 3D fix. If it is saved to disk with this field as true, then it won't need to get a lock to send the magnetic flux vector to the AHRS.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1346 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 08:35:44 +00:00
peabody124
4b0a0236d8
OP-119 AHRS: Increased GPS stack size to allow WWM to not overwrite other memory. In addition converted all the calls to use pointers so I will switch to using pvPortMalloc vPortFree to get it off the stack entirely. Now correctly computing flux for me and running.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1345 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 08:35:41 +00:00
peabody124
2031cfe4d0
OP-119 AHRS: Added error counters for the messages as well as changed an error on AHRS echo back for the HomeLocation message.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1344 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-20 22:52:13 +00:00
peabody124
86766ecc14
OP-119 AHRS: Removed WMM computation for now because it was triggering a reset (probably not watchdog) which is weird - it worked on AHRS. Maybe running out of memory? Also added the break on comm error in ahrs_comms to resync with it. I think the message to send the home location is also not working right now. Fixed chip reset.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1340 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-20 14:48:02 +00:00
peabody124
ef0b307353
[OP-119] Flight/AHRS: Created a HomeLocation object which is updated when the GPS gets an initial 3D fix and populated with the information to convert from LLA from the GPS to NED reference frame. Also added a message for passing the MagneticNorth vector to the AHRS and removed that computation from AHRS.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1337 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-19 20:38:27 +00:00
FredericG
fd986f3437
OP-90 Configuring the ET OSD without eLogger. The module can now read a opaque config-file from the SD-card card and send it to the OSD
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1336 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-19 17:32:18 +00:00
peabody124
3c4def13cc
AHRS: Added message to pass GPS information into AHRS from OP. This is then converted
...
into NED reference frame and used in the INSGPS algorithm, although currently this
information isn't propagated back to OP. Data structures related to the GPS position
into the algorithm and the position estimate out will likely be in flux.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1334 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-19 05:18:34 +00:00
peabody124
8bcff21184
Flight: Made the actuator module perform a get after set to allow configuration module to override servo position.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1329 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 20:47:36 +00:00
FredericG
0b9079e277
ET OSD: removed existing debug and config code
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1327 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 19:15:43 +00:00
peabody124
cfd20922cd
AHRS: Added the filtered data to the attitude raw object. Even though this seems like an oxymoron it's still raw to the EKF algorithm, and nice to see the real values after filtering to make sure nothing weird is going on. However, if people don't like this I'm open to suggestions/patches. I'd maybe suggest the whole attituderaw object be converted to ahrsraw anyway since it's more like that (eg. none of the values are actually attitude estimates).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1325 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 14:54:24 +00:00
peabody124
fda6fc8371
Merge branch 'mac_support'
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1324 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 14:29:53 +00:00
peabody124
450cf07a89
AHRS: Keeping magnetometer I2C address consistent with change to I2C driver.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1323 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 13:54:15 +00:00
FredericG
b46bc68e96
"addr" field of I2C transaction struct now takes real I2C address, and not address that is pre-shifted to accommodate the R/W bit
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1321 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 10:04:55 +00:00
FredericG
be2f5bbf70
ET OSD: Adapt to new I2C API
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1316 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 09:31:54 +00:00
peabody124
4cba4929c2
AHRS: Fixed another bug in decimation code - I stupidly used Matlab 1 based indexing. Adjusted timing of AHRS so it can process all the data and doesn't miss updates. Finally adjust all inputs to INS to have correct sign and orientation (I think). This is X is forward, Y is right, and Z is down which is mentioned in the forum as our standard and fits the algorithm. The magnetic sensor driver should be modified to return in this order (currently reads X,Y,Z registers which maps to left, back, up) but maybe since it's a board dependent orientation it's better where it is.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1315 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 05:47:44 +00:00
dschin
9ae9c87574
Six point sensor cal for accels and/or mags
...
Uploaded here for now - belongs in GCS probably.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1310 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-17 19:02:07 +00:00
peabody124
64bcebb87a
AHRS: Fixed bug in the downsampling code (used a += a + blah, dumb). Also added initialization of the magnetic flux based on fixed GPS settings (I hope you're near Houston). I will add the GPS communication shortly.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1307 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-17 05:32:07 +00:00
dschin
ae18a8e89c
Added general functions for coordinate conversions
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1306 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-17 00:09:32 +00:00
dschin
4f31bfbef7
Fixes for the project files. Hopefully they don't break someone else.
...
Eclipse Workspace:
- Made project in Eclipse workspace point to trunk/flight
- Re imported launch configurations from previous version
OpenOCD
- added "ft2232_device_desc "Dual RS232-HS"" back to jtag cfg files because windows didn't like it w/o it.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1305 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 23:40:27 +00:00
peabody124
f74268b5e5
Cleanup and documentation.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1304 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 16:58:24 +00:00
peabody124
a23f3c66f4
Behaving reasonably, added calibration code which runs by default on startup and take 6 seconds - this will be called from GCS in future and saved to SD card.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1303 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 16:58:22 +00:00
peabody124
e0d63103ec
Added a testing function for INS - currently doesn't stabilize for fixed inputs. Fixed two bugs I found in INSGPS (R[10] instead of R[9] initialized and Nav.Pos[2] was set to wrong X element).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1302 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 16:58:20 +00:00
peabody124
d2e234b53a
Adding the code from Dr. Dale to the AHRS. Currently diverges though, but not on the PC.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1301 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 16:58:18 +00:00
peabody124
ddbd4f8c80
Simple attitude calculation based on gravity and magnetic vector
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1298 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 06:03:44 +00:00
peabody124
3f408ad655
AHRS: Changing AHRS to use a DMA double buffering scheme with continuous samping for the analog data, then a simple fixed point FIR/decimate function. Currently all the oversampling parameters are hard coded as definitions, but will be updated to be configurable via settings.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1297 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 04:09:01 +00:00
peabody124
cc2441d41b
Adding ADC downsampling code
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1296 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 04:08:57 +00:00
peabody124
ed70cb4794
[AHRS] Missed a setting for the ADC configuration.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1292 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 01:12:00 +00:00
stac
3125ecfc4e
AHRSComms: altitude sensor data is now sent to AHRS
...
Altitude/pressure sensor data is sent to the AHRS whenever
the AltitudeActual object is updated.
Altitude, Pressure and Temperature are sent as floats.
Same as in the UAVObject that goes to the GCS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1291 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 01:02:13 +00:00
peabody124
d4c5dba234
[PIOS] The ADC mappings are strange because of the way the DMA engine works. Basically data is packed 16 bits ADC2 then 16 bits ADC1 channels, so the accels are pins [4 2 0] currently. Also there is inconsistency between the names of the pins in the config file which uses 1 based indexing and the index for PIOS_ADC_PinGet which is zero based and has to account for this interleaving. Probably should adjust config file to be zero based and then to make those pin numbers map to the function call. The actual order they appear is arbitrary as the ADC engine can scan in whatever order.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1290 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 00:53:30 +00:00
stac
c3e509c2cb
attituderaw: Replace HeadingActual with AttitudeRaw
...
AttitudeRaw now includes:
- magnetometers XYZ (in mG)
- gyros XYZ (raw ADC samples)
- accelerometers XYZ (raw ADC samples)
- placeholder for gyro temp sensors (read as zero for now)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1289 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 23:42:14 +00:00
stac
5d635d4233
uavobjects: regenerate existing uavobjects
...
No functional change, uavobjects were not regenerated since last
change to the object generator.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1288 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 23:42:07 +00:00
vassilis
a075eafb98
FlightArchitecture: Updated description of Stabilization module (air/ground speed handled by guidance module)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1285 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 14:19:33 +00:00
vassilis
9cd76fbe46
FlightArchitecture: Added Climbrate and Airspeed fields in Position objects
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1284 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 14:04:28 +00:00
vassilis
697b3510fb
Flight: First release of module architecture and dataflow diagram (still work in progress)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1283 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 03:02:21 +00:00
peabody124
a084d21804
Merge branch 'watchdog'
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1281 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-13 05:18:17 +00:00
cwabbott
c1cf1ec71b
PiOS/Win32: Most stable version of port.c so far. Changed Makefile.win32 to use mingw32-gcc to avoid conflicts.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1278 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-12 14:32:52 +00:00
dschin
487b61473e
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1268 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-11 16:18:24 +00:00
cwabbott
1125311083
Fix Eclipse project files.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1252 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-09 18:24:26 +00:00
cwabbott
f041569bfe
fixed a small problem in port.c, also added some debug statements.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1246 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 18:38:03 +00:00
stac
f74c6ffdd5
i2c: rewrite i2c layer
...
The STM32 I2C block has a number of errata associated with it.
These errata are primarily related to timing sensitivities between
the peripheral and the interrupt handler. In particular, the
correct generation of the stop bit relies on the I2C IRQ running
immediately and not being held off for any reason.
NOTE: The I2C interrupts must be the highest priority IRQs in the
system to ensure correct operation.
I2C protocol is now implemented as a formal state machine.
See: stm32_i2c_fsm.{dot,jpg} for FSM description.
I2C init is now expressed by const initializers in pios_board.c
for both OP and AHRS boards.
I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays
of an unlimited number of bus transfers to be done atomically.
The I2C adapter driver now handles all bus-level locking across the
list of transactions. Generation of start/restart/stop conditions
are handled automatically over the list of transactions.
Timeouts have been removed from the API for now. May be added
back later.
This driver has run error free on both the OP and AHRS boards for
up to 48hrs but it still sometimes fails earlier than that on the OP
board. There is another possible set of improvements to the driver
that could employ the DMA engine for transfers of >= 2bytes. This
change would reduce the timing sensitivities between the peripheral
and the driver but unfortunately, both the SPI and I2C interfaces
share the DMA1 engine. That means only one of these two peripherals
can use the DMA engine and right now, SPI between OP and AHRS is
already using it.
Failures are currently fatal and will lock up the CPU. This allows
useful information to be obtained in the failure cases.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:15:08 +00:00
stac
b6c1f43145
i2c: Change API to allow passing const config data
...
Mark the I2C_InitStruct parameter as const so that we can pass
const data as the initializer.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1240 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:58 +00:00
stac
f66e2cbd86
battery: fix doxygen header info
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1239 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:56 +00:00
stac
9050b9d26a
ahrs_fsm: minor style fixups
...
No functional changes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1238 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:55 +00:00
stac
a320a3e4d4
build: Turn modules back on
...
The modules were disabled for some reason in r1172.
This just turns them back on for the real targets.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1237 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:53 +00:00
stac
d7856b3d0a
gdb: Do not automatically reset target in gdb init file
...
The gdb init files would previously reset the target immediately
when gdb started up. This is sometimes an unpleasant side-effect
of running gdb.
In order to connect to the target, use the new "connect" function.
To reset the target use "mon reset".
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1236 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:52 +00:00
zedamota
a688b95eb6
Flight firmware-Start of the new bootloader
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1235 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 00:14:22 +00:00
dankers
297985c2a0
Move old bootloader to bootloader.old
...
This should be removed at some point but can wait till we have a working bootloader.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1234 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-07 23:55:28 +00:00
cwabbott
6f553efe45
debug_printf() for PiOS.win32. There are still many issues :(.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1226 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-07 02:30:35 +00:00
peabody124
0fdfbb2ffb
Deleting old USB code that I meant to delete a while ago. Also changed names of some functions to OP. Finally fixed the USB taking over PIOS telemetry. Detects the USB cable and that the configuration has been taken by the USB bus.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1217 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-05 23:43:52 +00:00
peabody124
0eac218572
Small update to make ManualControl get the command after setting it. That way if the flight system isn't meant to overwrite it (i.e. flying via GCS) it uses the right value. I think this should actually be the default behavior of UAVObject set... awaiting feedback from Vassilis.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1214 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-05 19:56:36 +00:00
pip
611aee73ad
Removed I2C support from PipBee as it's not used. Added 4 LED definitions.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1208 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-04 17:35:48 +00:00
pip
0331f05e9a
Added extra LED's .. now up to 4 LED's .. (PipBee has 4 controllable LED's)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1207 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-04 17:32:42 +00:00
cwabbott
d910b8f756
slight changes to get PiOS.win32 to compile
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1205 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-04 14:21:58 +00:00
dankers
1a0f2e81e8
Foundations for PipBee modem code.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1203 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-04 09:37:09 +00:00
cwabbott
c2508bbb9e
PiOS for win32
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1200 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-03 19:29:14 +00:00
dankers
a3c1bbfc95
Remove no longer needed SDCard Files
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1190 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-01 14:00:09 +00:00
sambas
7f6336d324
OP-22 Flight/PiOS: Spektrum reworked, input is mapped to old aux in receiver connector, works nicely with calibration plugin. Also bind works, just needs config flag to bind on powerup
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1189 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-01 10:34:07 +00:00
peabody124
47da7326e7
Damn thought I'd commited this
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1176 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-29 13:50:24 +00:00
peabody124
23ed7c8435
Removing the device_desc line since it seems to advertise differenetly across platforms and openocd doesn't require it. Please revert this change if it starts block other OS but I don't think it will
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1175 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 21:29:27 +00:00
peabody124
7e6afe5a75
Updated HID code to do packet processing in OS indepdent layer. Should now work on all platforms. Please test and get back to me. Maximum object size of 62 bytes currently.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1174 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 18:55:04 +00:00
corvus
02a78f0470
moved Vassilis stabilization module as of r1153 into Stabilization/simple
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1173 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 15:03:55 +00:00
corvus
9ad9ffd466
moved new stabilization code into experimental subdirectory
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1172 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 15:00:51 +00:00
corvus
c8486d08e4
Fixed some bugs in OpenPilot Core.
...
- syntax error in pios_board_posix.c introduced with Doxygen comment blocks
- platform dependant code had been added to openpilot.c instead of pios_board.c
- redundant header inclusion (stm32... already included by PiOS)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1171 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 14:34:48 +00:00
dankers
32e6d53b23
Small comment issue that was causing build to fail
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1170 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 11:28:18 +00:00
edouard
9145a4b1a6
Doxygen work: created "OpenPilot System" group for system libraries and core files. Changed a typo on the Osd Doxygen. Let me know if you're OK with this approach.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1169 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 07:28:21 +00:00
peabody124
6f63c10dca
Removing more debugging comments
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1168 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 23:48:12 +00:00
peabody124
3144e3157c
Added back checks on USB cable so falls back to serial telemetry if not plugged in
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1167 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 23:11:28 +00:00
peabody124
27bcd20882
HID working on Mac for telemetry. Need to tweak GCS code for Win/Linux
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1166 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 20:50:20 +00:00
peabody124
dac82b3c17
Getting closer for HID. Now a well behaved HID device. Just need to update GCS plugin for new data format and make PJRC wrappre work properly on Mac
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1165 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 19:09:55 +00:00
peabody124
27d429fe18
Got better HID report design with valid data length embedded in report
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1164 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 17:41:56 +00:00
FredericG
66e22b56ce
Fix in bmp085 driver. Was not checking correctly if lock on I2C succeeded => caused an assert when used in combination with other I2C devices
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1163 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 09:52:45 +00:00
FredericG
efaa6c910b
MKSerial: also report ground-speed
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1162 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 09:49:47 +00:00
peabody124
eb41a84acf
And this
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1161 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 08:09:43 +00:00
peabody124
7d7802593e
Oops, sorry missed these files
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1160 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 08:08:50 +00:00
peabody124
fe616df48d
Further tweaks. Will start trying to get reliable communication with larger report size tomorrow
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1159 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 07:56:50 +00:00
peabody124
840f7ff456
A version of the firmware that successfully Acks back and forth over HID. Still need to refine the PIOS interface and make GCS strip out the report ID data (if necessary). Also note: currently if you run too many modules the watchdog timer kicks in. I haven't determined if this is due to an interrupt binding up or what (and why it doesn't happen more often since I can't find any code that explicitly resets the WWDG).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1157 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 06:22:34 +00:00
peabody124
d89cd43cd1
Further tweaks to the HID update
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1156 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 05:28:04 +00:00
peabody124
c46dcea73a
Pretty major update of the USB HID core. Removed a lot of old code related to custom drivers and BSL (which will be brought back under HID). Device enumerates but still not communicating. Hopefully nothing broken, lots changed.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1155 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 03:19:07 +00:00
corvus
2621d07574
Added UAVObjects: FlightSituationActual NavigationSettings NavigationDesired
...
- Added FlighSituation Module (development module for sensor fusion, mostly stub, possibly renamed later)
- Added Navigation Module (development module for navigating towards a point in space - DEVELOPMENT CODE, NOT STABLE YET (I am testing around with this))
- Changed Stabilization Module (uses local reference frame now. Stable except for code cleanup/review. Tested in simulator and outperforms old code.)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1154 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-26 21:26:28 +00:00
dankers
dab978cf98
DOh! should have been part of last commit.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1151 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-23 04:35:10 +00:00
dankers
1fb8fc797c
Floss-JTAG file for new Revision B of Floss-JTAG (Rowan JTAG).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1150 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-23 04:34:32 +00:00