rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
Code Issues Releases Activity
3,426 Commits 5 Branches 8 Tags 266 MiB
b6a8293f69
Commit Graph

76 Commits

Author SHA1 Message Date
James Cotton
b6a8293f69 OP-378: Get BMA180 interrupt working. Data gets pushed onto a fifo that is 
pulled from in the INS code.
 2011-05-30 03:40:51 -05:00
James Cotton
9ede84680e OP-378: Start working on IRQ driven BMA180 reading and also fixed the mag order 2011-05-26 13:57:41 -05:00
James Cotton
0a60c5b57c Merge branch 'master' into OP-378_James_INS 2011-05-26 12:19:30 -05:00
James Cotton
750097ea73 OP-378: Small changes to get drivers working again. Fix I2C port for IMU3000 
and change convention so that 0 is success, < 0 is error.
 2011-05-18 23:35:45 -05:00
James Cotton
ab3127a0ea OP-378 Update the INS Makefile for the new file formats 2011-05-18 14:39:38 -05:00
James Cotton
81b7fb6185 Merge branch 'master' into OP-378_James_INS 2011-05-18 12:50:29 -05:00
Stacey Sheldon
575010169a build: add pios_board_info_blob struct to bootloader flash image 
The board info blob is stored in the last 128 bytes of the
bootloader's flash bank.  You can access this data from the
application firmware like this:
  #include <pios_board_info.h>

  if (pios_board_info_blob.magic == PIOS_BOARD_INFO_BLOB_MAGIC) {
    /* Check some other fields */
  }

DO NOT link pios_board_info.c into your application firmware.
Only bootloaders should provide the content for the board info
structure.  The application firmware is only a user of the data.
 2011-05-16 08:30:30 -04:00
Stacey Sheldon
2301600f11 Make missing definitions for essential macros more obvious 2011-05-07 18:05:50 -04:00
David Buzz Carlson
876ca3044c Added EKF code. Most of this was bulk copy and paste from the AHRS, so a lot of verification needs to take place. Grabbing sensor data remains untested. 2011-04-20 03:37:50 -07:00
chebuzz
06443b4281 OP-378 - OP/INS - Add initial support for INS. HMC5883, BMP085, BMA180, IMU300 all added. Throrough verification has not been done on any of them. main() simply calls self-test functions on all of the hardware. 
AHRS_comms still needs to be implemented.  INS/GPS functionality still needs to be implemented.  Double-check of the new drivers still needs to be done.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3162 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-14 12:46:39 +00:00
chebuzz
195e93c0d6 OP-377 PiOS/BMP085 - Update BMP085 driver to be FreeRTOS agnostic. This is required since new INS does not run FreeRTOS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3160 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-14 09:46:23 +00:00
pip
4fab429f50 Corrected the #ifdef line (line 26/27), it was "#ifndef STM32103CB_AHRS_H_", it's now "#ifndef STM32103CB_CC_H_" 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3022 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-10 20:22:20 +00:00
sambas
b240915d05 PPM driver cleanup 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3010 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 18:52:50 +00:00
pip
0d389c4d34 Forgot to comment out serial port debugging option .. sorry - again 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3009 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 18:32:16 +00:00
pip
48cecfaacd Forgot to commit this file - sorry 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3008 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 18:29:48 +00:00
sambas
0eeacb44bd PPM driver for OP, first test 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3007 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 18:08:13 +00:00
pip
62e510a696 Set unused/unconnected pins as outputs. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2875 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-24 17:31:24 +00:00
pip
578b779a76 Fixed PPM compile errors - you can now compile for PPM input if desired. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2818 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 13:41:19 +00:00
stac
66a9d53d0a hwinit: Convert I2C driver to dynamic init 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2773 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-12 22:19:54 +00:00
stac
3fda65c5d3 hwinit: Convert SPI drivers to dynamic init 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2772 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-12 22:19:50 +00:00
stac
841b0d3d6d hwinit: Convert COM and USART to dynamic init 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2771 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-12 22:19:43 +00:00
peabody124
a3ba9c3781 CC-21 Make it possible to enable Spektrum on CC, although it eats up S6 in 
order to free a timer.  Mode PIOS_DELAY (not working cleanly) to TIM3 because
Spektrum resets TIM2 count.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2758 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:45 +00:00
peabody124
03fb82ad0a CC Attitude: Change when AttitudeRaw is set to end of attitude estimation, 
because this is what is determines when the Stabilization code executes.
Because we aren't oversampling gyros relative to the PID in CC we should set
the attitude first (computational time to do so is negligible).

Also change update rate to 500 Hz.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2750 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:18 +00:00
pip
6559615ef8 Made quite a few constants/#defines capitals (previously lower case) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2743 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-06 10:55:08 +00:00
peabody124
56d4d54a97 CC: Increase the memory for the modules after removing PriTxTask from CC and 
also increase the telem queue to decrease event errors (can be reverted later if
we need the memory back)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2730 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-05 10:52:59 +00:00
peabody124
f97d853c80 Make the PriTx queue optional which saves 700 bytes 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2729 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-05 10:52:52 +00:00
peabody124
cf2e9fb349 Memory: Also allow overriding Stabilization stack size 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2690 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-02 08:57:34 +00:00
peabody124
b1e4b65f3d CC-1 Bigger oversampling window for CC sensor data 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2667 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:18:31 +00:00
peabody124
e27c9c0b7a CC-6 Rename Flash function to not be all upper case consistent with other PIOS 
functions

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2660 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:18:04 +00:00
peabody124
1d2ad6e9cb Telemetry: Move the telem stack size to the board definition file since CC 
needs less

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2659 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:17:59 +00:00
peabody124
063c58e7c0 CC-12 Enable Watchdog on CC 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2653 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:17:32 +00:00
sambas
195b63b6bb OP-22 PIOS/Spektrum: Made spektrum input driver, NOT YET TESTED!!!, also preliminary support for CC, sync/supv timer not yet fixed. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2602 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-28 09:25:30 +00:00
edouard
df0b5f9b6c CC-13 CopterControl bootloader first pass. Does not talk on USB for some reason, but starts. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2601 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-27 22:33:13 +00:00
peabody124
99eb1a89f9 CC-5 PIOS/Servo: CC default servo position was 2000 from testing. HUGE SAFETY 
ERROR

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2593 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-26 01:25:29 +00:00
peabody124
c759253b77 CC-6 Flash chip working to read ID. Also tweaked how the semaphore for the SPI 
bus is used to be a bit safer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2591 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-25 17:46:27 +00:00
peabody124
d2f3e0d379 CC-6 Initial code for the flash chip on CC 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2578 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:52:14 +00:00
peabody124
21e3441f00 CC-3 Set gyro to downsample 10x to 250 Hz 
Conflicts:

	flight/CopterControl/System/inc/FreeRTOSConfig.h

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2575 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:52:05 +00:00
peabody124
23599ee59f CC: Set the buffer size of USART smaller and register teh AHRSSettings 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2573 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:59 +00:00
peabody124
da96ce15b9 OP-256 PIOS/PWM: Converting PWM input to use standard driver structure. 
Beginning of unifying the input types into PIOS_RECEIVER.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2568 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:45 +00:00
peabody124
99f2f3c68b OP-291 CC Servo configuration: Gets S5 and S6 working 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2566 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:38 +00:00
peabody124
108ea8c959 OP-295 Get CC pin mappings consistent for using the temperature sensor 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2565 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:34 +00:00
peabody124
2d9f7f32d1 OP-291 PiOS/Servo: Converting output to use driver system 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2499 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-21 03:40:21 +00:00
peabody124
c2bdf624e8 OP-269 PIOS/ADC: Previous ADC driver update changed the PCLK2 divider for all 
projects which messed up a timer on OP and serial on PipX.  Now this is only
changed for AHRS.  Ideally wouldn't even change for that but then ADC runs too
fast and we get a lot more CRC errors for dealing with all that data.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2459 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 23:00:48 +00:00
edouard
b3ca037308 OP-277 Update all files to use a BOARD_TYPE and BOARD_REVISION scheme through the whole codebase. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2458 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 20:41:55 +00:00
peabody124
04a00c7327 OP-269 PIOS/ADC: Change the initialization code to work well when changing 
oversampling

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2452 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 16:02:53 +00:00
peabody124
ab75e8117f OP-265 CC: Getting GPIO lines working 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2443 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 02:45:34 +00:00
peabody124
81b0c3fdb6 OP-269 PiOS/ADC: Moved AHRS ADC code to PiOS and made all the projects use it 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2440 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 02:45:22 +00:00
zedamota
ad0b3e911d OP-268/PipX Bootloader - Changed Timers for MD device, auto memory space fetching (as per people request ;)). Stripped unused functions to reduce size. 
TESTED WORKS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2431 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 15:33:24 +00:00
peabody124
ad7a4cded0 OP-265 PIOS/USB: Put USB buffer size in the board file 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2428 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 02:15:19 +00:00
peabody124
94ff276522 OP-265 CC: Tweaking objects included and the memory requirements 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2426 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 01:38:49 +00:00