Alessio Morale
c772442723
OP-1477 - remove debug infos and add send some relevant informations using SYS message (firmware and board revision/info)
2014-09-24 01:06:41 +02:00
Alessio Morale
7e78194e12
OP-1477 - change led rate so that's less annoying
2014-09-23 20:27:10 +02:00
Corvus Corax
ca7a3e4333
Merge branch 'next' into corvuscorax/OP-1483_leaky-integrals-and-post-filtering
2014-09-23 13:54:33 +02:00
Werner Backes
b621df59f2
Merge remote-tracking branch 'origin/D-Lite/OP-1483-PathFollower-DisablePosKi' into next
2014-09-23 13:33:32 +02:00
Fredrik Larson
c36e9a9122
Merge remote-tracking branch 'origin/thread/OP-1474_PID_Scaling_Banks' into next
2014-09-23 06:20:34 +10:00
Fredrik Larsson
b93a7a9dce
Arming for Helis on Revo
2014-09-23 05:35:35 +10:00
Alessio Morale
0885fda926
OP-1499 - CFG-CFG mask was incorrect (nav is 0x02, not 0x01)
2014-09-22 00:56:49 +02:00
Corvus Corax
41e062373d
OP-1483 enable postfilter for indoor mode for filter debugging, change default filter alpha coefficient to 0.999
2014-09-21 19:26:01 +02:00
Alessio Morale
a5ebf36425
OP-1499 - Replay the configuration sequence in case of gps disconnection, add retry logic in case of errors
2014-09-21 16:38:52 +02:00
Alessio Morale
cedb4f127d
OP-1477 - typos and other fixes from review
2014-09-20 20:58:40 +02:00
Corvus Corax
76f94e13ef
Revert "OP-1483 implement leaky integral on position control loop in pathfollower (vtol only)"
...
This reverts commit 1a0ab29050
.
2014-09-20 13:45:45 +02:00
Corvus Corax
b315c8f106
OP-1483 Added velocity filter to correct EKF's velocity estimate for static velocity offsets
...
(caused for example by sensor disagreement or calibration issues)
2014-09-19 16:34:20 +02:00
Corvus Corax
1a0ab29050
OP-1483 implement leaky integral on position control loop in pathfollower (vtol only)
2014-09-19 15:52:11 +02:00
m_thread
226fe186c4
Merge branch 'skarlsso/OP-1474-PID_Scaling_one_factor' of ssh://git.openpilot.org/OpenPilot into thread/OP-1474_PID_Scaling_Banks
2014-09-19 15:15:52 +02:00
Stefan Karlsson
b3e7a23f4f
OP-1474 Demultiplex TPS settings when pid banks are updated
2014-09-19 15:12:07 +02:00
Stefan Karlsson
9a21eed71e
OP-1474 Make it possible to select axes to scale
2014-09-19 15:11:15 +02:00
m_thread
3b1e67d185
Merge remote-tracking branch 'origin/next' into thread/OP-1474_PID_Scaling_Banks
...
Conflicts:
ground/openpilotgcs/src/plugins/config/stabilization.ui
2014-09-19 09:01:02 +02:00
Stefan Karlsson
f0c47976a5
OP-1474 Fix label compile error
2014-09-19 01:29:04 +02:00
Stefan Karlsson
31c5f1c519
OP-1474 Make it possible to select the combination of P, I, and D to scale
2014-09-19 01:16:49 +02:00
Stefan Karlsson
d3e7ef300f
OP-1474 Use PID banks for the TPS settings
2014-09-19 01:05:08 +02:00
Werner Backes
c90973cb99
Removed the now unused position Ki from VtolPathFollowerSettings UAVObject
2014-09-18 17:01:50 +02:00
Alessio Morale
46ef59f186
OP-1379 - Rebuild and simplify the queuing mechanism
2014-09-17 01:24:01 +02:00
Alessio Morale
eb15939031
OP-1477 - typo in mallocFailed trap
2014-09-17 00:21:32 +02:00
Alessio Morale
2cca5162f7
OP-1477 - a bit of cleanup, some flash bits moved to a separate file
2014-09-16 23:02:53 +02:00
Alessio Morale
2885a20acb
OP-1477 - add watchdog support
2014-09-16 22:51:28 +02:00
Alessio Morale
2f50dbeee5
OP-1477 - Split and cleanup gpssys module
2014-09-16 22:40:55 +02:00
Alessio Morale
cac463e623
OP-1477 - various changes
...
- move to UBX libraries;
- remove configuration (it will be done by Revo);
- set speed at 115200;
- Change sysmod rate;
2014-09-16 22:40:55 +02:00
Alessio Morale
50d4a97c0c
OP-1477 - GPS SYS: for multi device support of HMC5x driver
2014-09-16 22:40:55 +02:00
Alessio Morale
c232985baa
OP-1477 - initial framer + autoconfiguration and some fixes
...
- Added a framing code for gps data to be able to interleave mag sentences.
- Fix fields definition, set structures used to send UBX data as packed to fix issues with alignments,
- change axis orientation to match revo when both boards conector sides are are aligned
2014-09-16 22:40:54 +02:00
Alessio Morale
28f3ca9a17
OP-1477 - Use UBX_DDC driver
2014-09-16 22:40:54 +02:00
Alessio Morale
11522ccbb0
OP-1477 - move to PIOS_I2C
2014-09-16 22:40:54 +02:00
Alessio Morale
36bb58755b
OP-1477 - add support for SPI/MAG
2014-09-16 22:40:54 +02:00
Alessio Morale
1fa2bfddc6
OP-1477 - Add GPS System Module
2014-09-16 22:40:54 +02:00
Alessio Morale
ff82d50ee0
OP-1275 add an APP_MINIMAL flag that optionally omits most of the stuffs (flight related stuffs and sensors for example)
2014-09-16 00:42:49 +02:00
Alessio Morale
c49497f2e0
Merge branch 'amorale/OP-1434_GPSV9_fc_support' into next
2014-09-15 23:49:54 +02:00
Alessio Morale
ece0d64c9f
OP-1434 - Update a (old, now wrong) comment
2014-09-15 15:27:19 +02:00
Alessio Morale
3e785cf929
OP-1434 - Use vector_lengthf, fix a typo in a comment
2014-09-14 21:44:41 +02:00
Stefan Karlsson
bdbe875a90
OP-1474 Use ActuatorDesiredThrust as default source for TPS
2014-09-14 16:08:21 +02:00
Werner Backes
80b6757ea6
Don't use I-term in the VtolPathFollower's position control loop for now.
...
See OP-1483 for why it's considered not to work as expected.
2014-09-14 15:39:13 +02:00
Alessio Morale
3fd5ca08cd
OP-1434 - Switch to common aux mag support library
2014-09-13 16:15:02 +02:00
Stefan Karlsson
662b29ac05
OP-1474 Include I in the scaling and let the TPS factor piggyback on the speedScaleFactor
2014-09-10 22:49:49 +02:00
Stefan Karlsson
7afb211330
OP-1474 Revert TPS debugging code
2014-09-10 00:42:40 +02:00
Alessio Morale
c777f9e194
OP-1406 - Fixes from review comments
2014-09-08 23:24:18 +02:00
Stefan Karlsson
c0152b7e19
OP-1474 Thrust PID scaling
2014-09-08 00:14:49 +02:00
Corvus Corax
4a19f98c95
OP-1156 hotfix in pathfollower code - use correct VerticalPosPI.Ki and ILimit + uavobject typo
2014-09-06 13:51:30 +02:00
Alessio Morale
233dec6d8d
OP-1379 - Various fixes and additions
...
- Support blocks of led for notification (that is a certain number of leds between a min and a max index);
- Fix an issue with bogus colours on fast updates at LED N°0.
- Add NOTIFY_SEQUENCE_NULL to skip handling a specific alarm status;
- Adjust sequences and add Config and Receiver Alarms;
- fix issue with Alarm trigger/repetition;
- Enables Notify module only if a WS281x output is enabled.
- Add some documentation for sequence/alarm definitions (sequences.h)
- Make sequences more coherent. All GPS related info are now shown in green.
- Revert to original blinking rate for onboard led
- add Notify on DiscoveryF4Bare target
2014-09-06 12:11:53 +02:00
Alessio Morale
884f797d61
OP-1370 - Add SBAS configuration options
2014-09-02 21:26:56 +02:00
Alessio Morale
2ddbb72bcf
OP-1370 - Fixes parameters name, values and cosmetic issues.
2014-09-02 21:26:43 +02:00
Alessio Morale
78662eb356
OP-1370 - Explicitly disable unneeded messages
2014-09-02 00:36:04 +02:00
Alessio Morale
3157c4e501
OP-1370 - Fix configuration storage on GPS
2014-09-02 00:35:26 +02:00
Alessio Morale
4715219a4b
OP-1434 - Enable magFilter for CF as it is needed to get Mag data for initial estimation
2014-08-31 23:39:30 +02:00
Corvus Corax
b64326208e
Merge branch 'next' into corvuscorax/OP-1456_struct_to_array_improvement
2014-08-31 18:43:48 +02:00
Philippe Renon
575e89f1a1
OP-1319 fixed minor spelling mistake in firmware code
2014-08-30 18:09:23 +02:00
Alessio Morale
f69e476ed3
Merge branch 'amorale/OP-1452_comusbbridge_improvements' into next
2014-08-29 20:25:29 +02:00
Alessio Morale
8418804ce4
OP-1406 - Revert magstate to non normalized values
2014-08-25 16:00:33 +02:00
Fredrik Larson
35a6807e63
Merge branch 'txpid_typo' into next
2014-08-24 10:23:14 +10:00
Laurent Lalanne
ccb97f014c
OP-1241 TxPID_Bank3 : Similar bug while GET data from bank
2014-08-24 02:15:24 +02:00
Corvus Corax
6faf1a73ac
OP-1456 get rid of cast_struct_to_array because it is error prone!
2014-08-24 00:16:34 +02:00
Corvus Corax
e7aa12be94
Merge remote-tracking branch 'origin/corvuscorax/OP-1454_weakleveling-hotfix' into next
2014-08-23 15:25:24 +02:00
Alessio Morale
1d3f9399c3
OP-1370 - Fix sensortype not shown for non PVT GPSs
2014-08-22 23:35:13 +02:00
Alessio Morale
5a3ea5fde0
OP-1370 - Add an option to store the configuration onto GPS
2014-08-22 23:16:38 +02:00
Corvus Corax
c5e0e58e6a
OP-1454 - fix weak leveling bug
2014-08-22 22:42:12 +02:00
Alessio Morale
5bf866c96e
OP-1370 - Remove autoconfig from CC (removing sat info to spare some ram and adding autoconfig does not make much sense), fixed compilation for all other targets
2014-08-22 22:34:52 +02:00
Alessio Morale
c4d5234ee6
OP-1370 - Show AutoConfig status in GPSPositionSensor
2014-08-22 22:32:57 +02:00
Alessio Morale
69b76b665c
OP-1370 - Add automatic sentence rate configuration based on HW version (llh+velned etc. vs PVT)
2014-08-22 21:27:50 +02:00
Alessio Morale
f430af83c5
OP-1370 - Add configuration support for nav rate and dynamic model.
...
Added stub for sentence rate configuration (enable_sentences(...))
2014-08-22 19:00:46 +02:00
Alessio Morale
1846806d17
OP-1370 - Refactor AutoConfig code out of UBX.*
2014-08-22 10:10:21 +02:00
Alessio Morale
903a77669e
OP-1370 - Add "management tasks" support for UBX, used for self configuration.
...
Initial state machine asking for gps version. Configuration messages definition
2014-08-22 02:43:30 +02:00
Alessio Morale
c6a82c5d23
OP-1370 - refactors UBX code to use a table of messages and handler instead of neverending switches
2014-08-21 19:34:36 +02:00
Alessio Morale
002c35163a
OP-1370 - Add support for mon-ver ack-ack and ack-nak messages for gps hw version detection
2014-08-21 19:34:36 +02:00
Alessio Morale
b6c053565e
OP-1434 - use degrees for rotation, fix Calibration gui
2014-08-21 19:34:36 +02:00
Alessio Morale
85be5ba7af
OP-1434 - handle mag rotation
2014-08-21 19:34:36 +02:00
Alessio Morale
8df34b01d7
OP-1434 - Fix heapremaining data type
2014-08-21 19:34:36 +02:00
Alessio Morale
0198129a1c
OP-1434 - Add 230400 to GPS port speed list
2014-08-21 19:34:36 +02:00
Alessio Morale
ce1e4e728e
OP-1434 - Support for mag calibration
2014-08-21 19:34:36 +02:00
Alessio Morale
397bfdc08b
OP-1434 - Add support for OP custom sentences on flight board
2014-08-21 19:34:36 +02:00
Alessio Morale
83a3822798
OP-1406 - Reenable mag offset estimation for onboard mag only right now
2014-08-21 19:34:35 +02:00
Alessio Morale
84758a6731
OP-1406 - Always feeds mag data even if invalid
2014-08-21 19:34:35 +02:00
Alessio Morale
e511190ad3
OP-1406 - Improve handling of external magnetometer, add additional settings
2014-08-21 19:34:35 +02:00
Alessio Morale
9d7a493c26
OP-1406 - Allows filtermag to switch between onboard and aux mag
2014-08-21 19:34:35 +02:00
Alessio Morale
bb085ddab9
OP-1452 - Auto enable COMBridge module if a port is configured as ComBridge
2014-08-21 11:43:36 +02:00
Alessio Morale
8940b7a50b
OP-1452 - Apply ComBridge port speed change without rebooting
2014-08-21 11:42:29 +02:00
Corvus Corax
4653c77296
OP-1156 removed old pathfollower implementations
2014-08-20 17:00:50 +02:00
Corvus Corax
1540fe0716
OP-1156 cleaned up updateAutoPilotVtol() function
2014-08-20 16:02:48 +02:00
Corvus Corax
70460e593e
OP-1156 fixes as suggested per review
2014-08-20 15:29:29 +02:00
Corvus Corax
760ae118e9
OP-1156 changed yaw math from interval [0..360] to [-180..180]
2014-08-16 20:48:56 +02:00
Corvus Corax
8daa5dfa12
Merge branch 'next' into corvuscorax/OP-1156_pathfollower-unification
2014-08-16 13:58:40 +02:00
Corvus Corax
915c24c8b6
OP-1156 changed PID control loops to use generic pid library, readded unnecessary integral and derivative terms to vtolpathfollower
2014-08-15 21:00:48 +02:00
Corvus Corax
b1675a2804
OP-1156 added vtolpathfollower velocity limits to attitude control
2014-08-15 19:23:41 +02:00
Corvus Corax
b562fcb02e
OP-1156 fix path logic to not deviate from correct altitude too much
2014-08-15 17:56:57 +02:00
Alessio Morale
5dbbda3adc
Merge remote-tracking branch 'origin/amorale/OP-1404_ublox_pvt_support' into next
2014-08-13 15:27:10 +02:00
Alessio Morale
376aa0052f
OP-1379 - Initial Notify module. Supports:
...
1) predefined seqences associated with each flightmode. 2) fixed table with alarm index and assciated led warn/error sequences/repetition rate.
2014-08-13 15:18:17 +02:00
Alessio Morale
f556a5e335
OP-1379 - Split simple notification and external lednotifications libraries
2014-08-13 15:14:55 +02:00
Corvus Corax
09e8b38407
OP-1156 fixed EmergencyFlyaway detection algorithm
2014-08-12 19:12:05 +02:00
Corvus Corax
56e4127bca
OP-1156: add path_direction as a source for yaw as suggested by Werner :)
2014-08-12 18:18:07 +02:00
Corvus Corax
ea4e7962a6
OP-1156 fixed wrong callback ID assignment for pathfollower callback diagnostics
2014-08-10 21:17:55 +02:00
Corvus Corax
8944419b0f
OP-1156 refactored pathfollower - new unified module as delayed callback - compiles but untested
2014-08-10 19:41:40 +02:00
Corvus Corax
a3d18bb578
Merge remote-tracking branch 'origin/D-Lite/PathFollowerImprovements' into corvuscorax/OP-1156_pathfollower-unification
2014-08-10 13:53:52 +02:00
Corvus Corax
ca1923f76f
OP-1156: Added new (stub template) pathFollower Module as well as builkd environment changes to compile it instead of old pathfollowers
2014-08-10 12:50:38 +02:00
Stefan Karlsson
454d491e48
Merge branch 'next' into skarlsso/OP-1397_add_responsiveness_to_txpid
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configtxpidwidget.cpp
ground/openpilotgcs/src/plugins/config/configtxpidwidget.h
2014-08-10 10:06:44 +02:00
Alessio Morale
1158c70a46
OP-1404 - minor cleanup, removed some duplicated code
2014-08-09 12:49:21 +02:00
Alessio Morale
2932045e3d
OP-1404 Fix NMEA data parsing for GSV
2014-08-09 12:04:25 +02:00
Corvus Corax
c5fae5ee84
Merge branch 'next' into andrecillo/OP-1317_IMU_wind_estimation
2014-08-09 10:43:48 +02:00
Alessio Morale
a18009e875
OP-1429 Change datatype for elevation and azimuth respectively to int8 and int16.
2014-08-06 12:55:07 +02:00
Alessio Morale
d04d630273
OP-1404 fix include file path
2014-08-05 17:25:28 +02:00
Alessio Morale
23d2368984
OP-1404 Fix nav-pvt.pdop data type
2014-08-05 16:50:38 +02:00
Alessio Morale
ea63def1c8
OP-1404 fix compilation with PIOS_GPS_MINIMAL, fix some copy/pastem madness
2014-08-04 18:17:01 +02:00
Alessio Morale
240eb8e573
OP-1404 - Prevent mixing pvt and other sentence solution data. use PDOP from pvt
2014-08-04 17:56:28 +02:00
Alessio Morale
d3569927a0
OP-1404 fix unit scaling for pvt, use check_msgtracker,
2014-08-04 11:04:35 +02:00
Alessio Morale
6f4b1d5c03
OP-1404 uncrustify
2014-08-03 15:27:30 +02:00
Alessio Morale
c68dd3c00e
OP-1404 - PVT will provide SOL+VELNED+POSLLH+Time. DOP will provide all dop values
2014-08-03 15:04:40 +02:00
Alessio Morale
1dd05c24cc
OP-1404 - Fix compilation with PIOS_GPS_MINIMAL defined
2014-08-03 12:50:42 +02:00
Alessio Morale
0976fb6e1b
OP-1404 - Add support for UBlox PVT sentence
2014-08-03 12:50:21 +02:00
Alessio Morale
016ba6940d
OP-1403 - drop attitude/revolution as it has been supersede by StateEstimation module
2014-08-02 20:48:56 +02:00
Alessio Morale
d856bbdb50
OP-1403 - Update targets
2014-08-02 20:48:48 +02:00
Alessio Morale
57a43a5587
OP-1403 - Migrate to new HMC5x83 driver and remove old HMC5883 one
2014-08-02 20:48:34 +02:00
Stefan Karlsson
7f344da977
OP-1397 Round to instead of floor to uint8_t values in txpid.c
2014-08-01 14:51:39 +02:00
Stefan Karlsson
a7ee6fa764
OP-1397 Add initial support for rate mode response (deg/s)
2014-07-30 23:49:56 +02:00
Stefan Karlsson
2113e1a2e1
OP-1397 Add initial support for attitude mode response (deg)
2014-07-30 23:48:55 +02:00
Werner Backes
065ba1a0c8
Adds a 3D mode to path_vector. This allows vertical path segments without
...
position changes. PathStatus now also contains correction_direction and
path_direction to make path following behaviour more transparent.
2014-07-29 13:16:47 +02:00
Werner Backes
3e2961420d
Add a 3D mode to path_endpoint. This allows FlyDirect waypoints to do
...
vertical movements without changing position.
2014-07-29 13:16:39 +02:00
Corvus Corax
5edb2dbae3
Merge branch 'andrecillo/OP-1317_IMU_wind_estimation' into corvuscorax/OP-1317_IMU_wind_estimation
2014-07-26 17:01:03 +02:00
Corvus Corax
5451003a58
Merge branch 'next' into corvuscorax/OP-1317_IMU_wind_estimation
...
Conflicts:
flight/modules/Airspeed/airspeed.c
flight/modules/Airspeed/gps_airspeed.c
2014-07-26 16:16:02 +02:00
Alessio Morale
e5b52d46d9
Merge remote-tracking branch 'origin/amorale/OP-1358_add_separate_rotation_calibration_offset_revo_only' into rel-14.06
2014-07-24 23:47:14 +02:00
Corvus Corax
a199fd1cb0
OP-1412 do not dicard mags after init
2014-07-23 22:40:43 +02:00
Andres
7f8e709e17
OP-1317 uncrustify
2014-07-23 08:04:52 +02:00
Andres
e195befc3a
OP-1317 removed comments
2014-07-23 08:03:48 +02:00
Corvus Corax
95799cf11b
OP-1412 delay ekf initialization until magnetometers are reporting valid data
2014-07-22 23:49:41 +02:00
Andres
ffabbc577c
OP-1317 moved Butterworth filter code into flight/libraries/math/butterworth.*
2014-07-22 20:03:43 +02:00
Alessio Morale
9bee143476
OP-1358 Revo:Implement roll/pitch trim settings separated from "nominal" board rotation settings
2014-07-21 11:01:07 +02:00
Andres
df4d211f8b
OP-1317 added a proper initialization of the Butterworth filter values
2014-07-20 16:22:27 +02:00
Andres
d7d20bb10f
OP-1317 merge with branch corvuscorax/OP-1317_IMU_wind_estimation
2014-07-20 15:46:35 +02:00
Andres
ddde6d1f5e
OP-1317 changed int into int32_t in function Quaternion2PY()
2014-07-20 15:26:05 +02:00
Alessio Morale
62755c4cab
unrustify
2014-07-16 20:39:12 +02:00
Alessio Morale
25c54ac16d
Merge remote-tracking branch 'origin/laurent/OP-1063_Multi_config_Hexa_fixes' into rel-14.06
2014-07-16 20:07:31 +02:00
Laurent Lalanne
1b447ee644
OP-1063 Multi_config_Hexa_fixes Stupid typo error with OctoX in VtolPathFollower.
2014-07-14 23:29:48 +02:00
Laurent Lalanne
c26e33964a
OP-1063 Multi_config_Hexa_fixes Added OctoX, define new mixer table for Octo(p) and OctoX. New motor definition for OctoX (NNE, ENE...) Fixes for svg frames. Defined default settings for OctoP/X in setupwizard (but disabled)
2014-07-13 13:58:18 +02:00
Laurent Lalanne
a46480a99b
OP-1063 Multi_config_Hexa_fixes : Added real HexaX, renamed HexaX > HexaH
...
Added artwork in config and wizard svg. Cleanup on svg connection diagram (layers)
DO NOT USE until mixers are fixed
2014-07-10 06:01:28 +02:00
rodneygrainger
3aaf1a3367
OP-1391 - Fix to prevent arming if unsafe due to current Thrust Mode (Altitude Hold/Vario)
2014-07-07 20:47:23 +12:00
Corvus Corax
80d3d7c954
OP-1374 hotfix to filtercf on checking of magnetometer calibration fabsf()
2014-06-29 18:36:46 +02:00
Alessio Morale
30491c7992
OP-1374 - Autostart the relevant PathFollower for known frame types
2014-06-29 17:23:57 +02:00
Alessio Morale
3ae85f6434
OP-1374 - Issue a Boot Alarm (reboot) if frame type is changed
2014-06-29 17:23:15 +02:00
Alessio Morale
1b823b7b92
Merge remote-tracking branch 'origin/Bertrand/OP-1308_Set_Same_Logic_To_Alarms' into next
...
Conflicts:
flight/libraries/sanitycheck.c
flight/modules/StateEstimation/filtermag.c
flight/modules/System/systemmod.c
2014-06-26 20:31:27 +02:00
Alessio Morale
c6a773363f
Merge branch 'amorale/OP-943_add_malloc_for_ccsram' into next
...
Conflicts:
flight/pios/common/pios_adxl345.c
make/apps-defs.mk
2014-06-22 19:31:03 +02:00
Alessio Morale
a03ad41bab
Merge branch 'amorale/OP-1365_pios_instrumentation' into next
...
Conflicts:
flight/modules/Attitude/attitude.c
2014-06-22 19:13:46 +02:00
Alessio Morale
263fd64ab5
Merge branch 'amorale/OP-1274_freertos_v8.0.0' into next
2014-06-22 16:06:21 +02:00
Alessio Morale
f30dd414ac
Merge branch 'amorale/OP-1227_cc_high_cpu_utilization' into next
2014-06-22 16:06:08 +02:00
Corvus Corax
3f11f4f6b2
OP-1371 fix for hitl: turn of receiver alarm if in gcs control mode (but set warning)
2014-06-18 22:46:44 +02:00
Corvus Corax
7898d507ca
drive-by bugfix in #ifdefed code affecting simposix
2014-06-18 20:41:58 +02:00
Corvus Corax
7933f2154c
OP-1317 - project 3d airspeed vector unto fuselage vector to get scalar airspeed estimate
2014-06-18 12:44:10 +02:00