rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
Code Issues Releases Activity
3,010 Commits 5 Branches 8 Tags 266 MiB
cfb2ca4e1b
Commit Graph

3010 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
stac
6892d933fd makefile: CC should only depend on uavobjects_flight 
Was depending on uavobjects (ie. all of them).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2852 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 04:18:48 +00:00
stac
251f227b31 makefile: reduce default verbosity level 
Add V=1 to your invocation of make to re-enable
printing of all command lines.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2851 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 04:18:46 +00:00
stac
617eec4d65 makefile: split out fw and bl targets and add cleans 
New targets:
 - all_fw       : builds all embedded application firmware
 - all_fw_clean : cleans all embedded firmware
 - all_bl       : builds all bootloaders
 - all_bl_clean : cleans all bootloaders

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2850 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 04:18:43 +00:00
stac
9035ba3f6b makefile: clean up summary lines 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2849 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 04:18:41 +00:00
stac
fbe22e1d81 makefile: cleanup 
- Removed commented out code
- Removed "begin" "finished" and "end" targets

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2848 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 04:18:39 +00:00
edouard
7d2b5ae744 OP-146 Stabilization config interface: this is a work in progress, and a pure mock-up of the UI, I would like feedback. 
The idea is to use a 'vernier' dial analogy, whereby you can either of course edit the values by hand in the config dialog, but you can also select the outer dial and adjust it with either mouse or keyboard (up/down and pgUp/pgDn).
Eventually, there will be a tab for the P factor, a tab for the I factor, and a tab for the rest of the adjustments (rate limits etc).




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2847 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 22:03:32 +00:00
pip
e7850ab25e Corrected scale for lat/lon - was out by a factor of 10 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2846 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 14:16:16 +00:00
pip
f6370a035d 'Slightly' more efficient binary packet handling. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2845 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 12:45:51 +00:00
pip
9da0fb47e2 Reduced GPS command resend to 2 second time-out, a few more white space corrections. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2844 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 12:32:08 +00:00
pip
3881c652c1 Simplified the binary code a little, added a 300ms delay after sending a FULL COLD RESTART to the GPS (IF we do that is), fixed some spelling mistakes. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2843 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 12:15:25 +00:00
pip
9d14723dcc Commenting tidy upping 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2842 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 11:32:24 +00:00
pip
d1d165adff More white space/tab corrections. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2841 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 11:19:12 +00:00
pip
0fd6170979 added another "#ifdef ENABLE_GPS_NMEA" 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2840 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 11:02:17 +00:00
pip
a2259201e5 removed tabs after spaces. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2839 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 10:55:01 +00:00
pip
414836a4c9 Added another parsing_errors++ line. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2838 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 10:36:27 +00:00
pip
4547013901 Added GTOP BINARY mode to the GPS module. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2837 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 10:16:50 +00:00
FredericG
42cf204dcd correctly detect 100% load 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2836 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 21:50:10 +00:00
pip
931102bf37 Added more error checking (checking for NULL pointers) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2835 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 15:33:20 +00:00
pip
3dcd93e66b Added telemetry functions. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2834 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 15:10:06 +00:00
pip
1bb5ed54ff Added save to SD card functions. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2833 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 14:14:59 +00:00
pip
5e501f3cae Fixed Lat/Lon scaling in the GetHomeLocation functions. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2832 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 13:50:31 +00:00
pip
9b10842f5d Updated some parts of the map plugin to use the new UAVObject utility. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2831 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 13:33:10 +00:00
pip
a5f17b148b Added getGPSPosition() function to the UAVObject utility 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2830 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 13:32:22 +00:00
pip
d666a61bf5 Created a new UAVObject utility plugin to make UAVObject access much easier for all plugins 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2829 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 13:21:02 +00:00
pip
ba7e7ba85d Check for error returned from homelocation util. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2828 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 11:17:30 +00:00
pip
4a1842f3be Added code to check for invalid parameters. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2827 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 11:15:39 +00:00
pip
32ae936df5 Uses the new home location utility 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2826 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 11:09:20 +00:00
pip
7a34e25956 Added a home location utility 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2825 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 11:08:56 +00:00
peabody124
5f2c502172 Arm checks: Simply don't check GPS because the dependence on AHRS Settings 
breaks CC.  This should be done by the GPS alarm being set only when
appropriate (i.e. by AHRS on OP when needed) and not by the GPS module.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2824 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 05:58:24 +00:00
peabody124
4972c99519 OP-316 Update accelerometer units to be right 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2823 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 05:58:21 +00:00
pip
0c48fe258a Changed alarm level checking from WARNING level to ERROR level before allowing arming. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2822 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 19:34:27 +00:00
pip
88cf1e276a Ignore Telemetry alarm when arming (telemetry alarm no longer prevents arming). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2821 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 17:53:03 +00:00
pip
df26016c64 Added alarm check when trying to change state to ARMED mode (from DISAMRED mode), if any warnings are set then it will not go into ARMED mode - unless the GPS is not required, in which case the GPS alarm will be ignored (if using Simple or Indoor AHRS modes). These checks are done in the okToArm() function. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2820 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 16:42:31 +00:00
dankers
4c03220268 Added Sami's first flip in the history of the universe with CopterControl. 
Video link included and it looks like it flies so well. 

Tempted to add Edouard's first test at a CopterControl submarine but it didn't go to well. :-)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2819 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 16:06:21 +00:00
pip
578b779a76 Fixed PPM compile errors - you can now compile for PPM input if desired. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2818 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 13:41:19 +00:00
pip
c214833346 oops!! .. enabled PPM and disable PWM by default .. sorry 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2817 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 13:40:19 +00:00
pip
d733f08a0e Fixed PPM compile option (missing pin defines) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2816 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 13:12:08 +00:00
sambas
8d6f320fca Handle I2C defines better, needed in CC for now 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2815 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 07:14:02 +00:00
edouard
06a8fdb45d Change AHRS to INS in the config gadget widget. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2814 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-19 23:04:38 +00:00
osnwt
6613158206 BootloaderUpdater: fixed compilation errors. It works with CC too (tested). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2813 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-19 19:18:03 +00:00
FredericG
c9060393e5 OP-302 Remove threads from modules that do not need them - Battery Module 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2812 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-19 18:56:52 +00:00
FredericG
374e822f79 OP-302 Remove threads from modules that do not need them - ET OSD module 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2811 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-19 13:25:27 +00:00
FredericG
c5f814a931 ET OSD, WIP, measure timing 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2810 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-19 10:18:00 +00:00
pip
9a2bdac49c Reduced CC CPU usage from 57% to 46% by moving the floating point multiplies outside of the accelerometer downsample/averaging loop in the updateSensors() function. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2809 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-19 09:33:03 +00:00
FredericG
ec634ef3e7 debug-pins, small fix 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2808 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-19 09:11:00 +00:00
osnwt
7af611139e GCS Installer: fixed German translation, thanks to Wellenbrett 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2807 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-18 08:47:02 +00:00
corvus
015e49ee5a some comments about gyro temp calibration added inbto the code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2806 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-17 15:32:26 +00:00
zedamota
9050608e6c Flight/Bootloader - Bootloader updater, minor update to help user with the CL options 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2805 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-17 15:02:10 +00:00
zedamota
56c195fa9a Flight/Bootloader - Bootloader updater, WORKING - tested with PipX only (should work for all boards though). 
Led(LED1 different color on each board) Sequence:
1-Power On
2-Led ON for 3 seconds (you can disconnect during this time - safety measure) 
3-Led flashes very quickly while the board is being programed (because the program is stored in memory this is very fast and looks like a led glitch)
4-If all good - LED flashes 3 times with a 1sec period and turns off - you may now reboot.
4-If an error ocurred - LED will keep flashing with a 500ms period until power off

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2804 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-17 14:54:57 +00:00
corvus
50e78b4265 typo fix 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2803 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-17 01:51:49 +00:00