James Cotton
f7d13ebd57
Hack to tweak the gyro gain for now although its too far out at the moment so
...
something isn't configured properly. Possibly it is staying in 250 deg/s mode.
Also make sure if the MPU6000 fifo backs up to pull extra data.
2011-11-27 01:22:37 -06:00
James Cotton
8bbc767a4e
Get the pressure sensor working and reading into Revolution
2011-11-27 00:52:09 -06:00
James Cotton
cd65df013e
Merge branch 'next' into revolution
...
Conflicts:
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-11-26 22:52:32 -06:00
James Cotton
13729f854e
PiOS F4: Fix PWM timer interrupts and enable PWM input
2011-11-26 22:41:41 -06:00
James Cotton
21367d3a22
Spektrum support for Revolution
2011-11-26 22:19:42 -06:00
James Cotton
e24c905ff7
F4 PiOS: Reimplement the RTC logic for F4
2011-11-26 22:13:57 -06:00
James Cotton
b11a4f7405
Clean up the actuator module for floating point usage. Also there was a bug I
...
don't understand where the channels should be scaled AFTER all of them are
computed. It feels like a memory overwriting bug and needs followup.
2011-11-26 16:12:32 -06:00
James Cotton
07e3ad10af
Force some floating point units to be safe
2011-11-26 15:52:25 -06:00
James Cotton
04f4afce46
Set idle load for revo
2011-11-26 15:52:04 -06:00
James Cotton
8c0db424fa
Fix long subtle bug where failsafe didn't show the output values it was using
2011-11-26 15:51:24 -06:00
James Cotton
c70a9a5381
Sanitize the floating point math in systemmod.c to be consistently floating and
...
not double
2011-11-26 15:16:16 -06:00
James Cotton
d3314f041a
MPU6000: Bring SPI down to 5 Mhz - much closer to spec
2011-11-26 14:56:28 -06:00
James Cotton
99123372d0
TO BE REVERTED: Temporary patch to make the w25x driver work with the revo m25p
...
chip. Need to abstract out the erase commands into a general pios_spi_flash
driver.
2011-11-26 14:55:16 -06:00
James Cotton
8b7aca0dcd
Include the accel bias into revolution attitude function and also make sure
...
downsampling is correct.
2011-11-26 14:40:32 -06:00
James Cotton
4a3fd96155
For now masquerade Revo as a CC for GCS settings
2011-11-26 14:18:09 -06:00
James Cotton
11ad135b27
Some changes to MPU6000 driver to make it start more reliably on fresh powerup
2011-11-26 14:12:12 -06:00
James Cotton
1574c96c3a
Add all the pin remappings and pin sources for F4 timers
2011-11-26 03:36:36 -06:00
James Cotton
c57acf6459
F4 PiOS: Must use a different remap command on F4 for timer module to command
...
pin. Include the remap source in the config structure now.
2011-11-26 03:35:26 -06:00
James Cotton
57b381235e
Init the timers and PWM in the board file
2011-11-26 02:19:56 -06:00
James Cotton
de9a8453ef
Configure the board to use PWM input and servo output
2011-11-26 02:19:56 -06:00
James Cotton
3e01c84a15
Add pin mappings for PWM and receiver port
2011-11-26 02:19:56 -06:00
James Cotton
e71030c6ce
Remove testing code for pressure sensor
2011-11-26 02:19:56 -06:00
James Cotton
c118159a6f
Remove refence to deleted object
2011-11-26 02:19:55 -06:00
James Cotton
d3cc67f5c4
Make the input wizard detect already inverted channels and preserve them.
2011-11-25 12:30:17 -06:00
James Cotton
fae611a01f
Fix bug where clicking back at last screen of input wizard would go back to
...
main screen and then in future buttons hung around for no reason
2011-11-25 11:30:12 -06:00
James Cotton
60664f6a26
Merge remote-tracking branch 'origin/ccfly/outputchannelform' into next
2011-11-25 10:48:41 -06:00
James Cotton
856f8a9b6c
Merge remote-tracking branch 'origin/pt/version-mismach-warning' into next
2011-11-21 07:38:16 -06:00
James Cotton
084b175290
Removed general error message for savign. Places using the save should
...
reliably provide feedback.
2011-11-21 07:25:07 -06:00
zedamota
a1f3035f15
added tooltip to the pfd stating the current refresh rate
2011-11-20 20:47:37 +00:00
zedamota
0875831f6d
made the firmware date display on a more user friendly format
2011-11-20 18:18:51 +00:00
zedamota
1632d354a1
Fix the don't show this again option
2011-11-19 18:47:41 +00:00
Oleg Semyonov
6d78b97d92
dsm: update DSM protocol binding details in the comments (no code change)
2011-11-19 17:33:04 +02:00
Oleg Semyonov
1d726509e9
Add first CopterControl flip on a Flybarless Heli into MILESTONES.txt
2011-11-19 17:23:20 +02:00
James Cotton
7637e9f669
Get flash chip working and saving to memory. Also get the I2C working with
...
BMA180 driver.
2011-11-19 00:13:02 -06:00
James Cotton
da75e9fdaf
PiOS: Make I2C return an error code for NACK
2011-11-19 00:11:16 -06:00
James Cotton
a7ef5601e0
Update the MPU6000 FIFO code and also fix the temperature code
2011-11-18 00:24:55 -06:00
James Cotton
6d74e96c31
Got attitude working again. MPU6000 FIFO reading needs a bit of work.
2011-11-18 00:00:55 -06:00
Michael Schulz
93267dd26f
Implemented suggestions from code review
...
* reduced top and bottom margins of outputchannelform
* removed obsolete methods in configoutputwidget.h
* fixed comment block
* switched to static accessor methods for UAVO
2011-11-17 20:51:17 +01:00
James Cotton
79730d5afa
Try and get the MPU6000 buffer to run down. Staying high for some reason.
2011-11-17 11:23:31 -06:00
James Cotton
0efffef1fa
Work on bringing the Revolution board up
2011-11-17 10:13:34 -06:00
James Cotton
d97e5dbc59
Add SPI MPU6000 driver. Unfortunate hack in HMC5883 EXTI handler to call
...
MPU6000. Need to generalize EXTI ASAP.
2011-11-17 10:12:10 -06:00
James Cotton
8477c2229b
Using real prototype board now. Move telemetry to GPS port for easy-ness right
...
now.
2011-11-17 01:58:51 -06:00
James Cotton
1c7c85635d
Typo with renamed PI
2011-11-16 19:48:13 -06:00
James Cotton
1deb799b6f
Get simple attitude estimation working on F4 INS. Also make MPU6050 return
...
scaling that casts to degrees.
2011-11-16 11:36:04 -06:00
James Cotton
8e79f86716
Make the CoordinateConversions use a floating point PI
2011-11-16 11:35:52 -06:00
James Cotton
aa698f7b0a
Increase the CC IRQ stack to avoid some memory warnings
2011-11-16 09:20:30 -06:00
Michael Schulz
d307446fdf
Merge remote-tracking branch 'origin/next' into outputchannelform
2011-11-14 21:14:45 +01:00
Michael Schulz
9bd74bb591
minor fixes due to last merge
2011-11-14 21:13:34 +01:00
James Cotton
aeb42332d6
Get the MPU6050 fifo running and read by the attitude module
2011-11-14 11:23:14 -06:00
James Cotton
59507249e1
Hack in attitude to read directly from gyros instead of fifo. All sensors
...
reading now.
2011-11-14 11:12:10 -06:00
