Corvus Corax
68fe938016
Implemented new programmable PathPlanner
2012-05-21 21:42:28 +02:00
Corvus Corax
09f25ab11b
Refactorted VTOLPathFollower to fit into new scheme: optional module, reports status and knows advanced FlightModes
2012-05-21 12:10:01 +02:00
Corvus Corax
84a0fd731f
Added ReturnToBase flightmode and correct behaviour in ManualControl
2012-05-21 12:10:01 +02:00
Corvus Corax
6a6eace700
Added forced disarming via systemalarm
2012-05-21 12:10:01 +02:00
Brian Webb
2f1a9e3e7d
Added PPM input to the PipXtreme. Also added configurable GCSReceiver timeout.
2012-05-20 18:30:37 -07:00
Brian Webb
6a7179120d
Fixed setting of PipX description, and changed gcs receiver object to be update on change on flight side so that it works on the PipX.
2012-05-19 09:25:11 -07:00
Brian Webb
c25884bcaf
Cleanup on the PipX branch.
2012-05-18 17:42:25 -07:00
Brian Webb
68d66d4181
Fixed firmware description in PipX status.
2012-05-17 20:35:17 -07:00
Brian Webb
6fbc3339d5
Fixed processing of UAVTalk packets when in transparent com mode.
2012-05-17 18:37:45 -07:00
Brian Webb
44a1663eb9
Fixed transparent comm on PipX.
2012-05-16 19:02:53 -07:00
Brian Webb
7082eda175
Fixed returning status for currently paired modem.
2012-05-15 20:11:52 -07:00
Brian Webb
93ec7c11a6
Fixed race condition on getting packets.
2012-05-15 19:38:14 -07:00
James Cotton
af8d65616e
Comment out some unused variables in the PIOS_ADC structure for now since they
...
were consuming lots of memory. Probably should make a simple adc version that
just queries the line when needed since we are only using this data at 500 ms.
However, the accumulator scheme in place is quite good for averaging over time.
2012-05-15 03:48:32 -05:00
James Cotton
39ce3cea17
Clean up the battery module
2012-05-15 03:08:18 -05:00
James Cotton
0a7f5fd5d3
Enable battery code again
2012-05-15 00:38:11 -05:00
Brian Webb
a3269aaf2f
Reverted some file permission changes.
2012-05-13 14:24:57 -07:00
Brian Webb
68d12b1b2f
Fixed some bugs with setting PairIDs in GCS.
2012-05-13 14:24:00 -07:00
Brian Webb
dd03b0b159
Added reporting of stats from the remote modem.
2012-05-13 09:34:21 -07:00
Brian Webb
ec67742ff6
Added configuration of COM ports on PipX.
2012-05-12 13:16:36 -07:00
James Cotton
46fc5fa4fb
Create a PathPlannerSettings object and move the PathMode setting to there.
...
Also add a (temporary) field to allow storing some custom paths to select on
the fly. Later will be replaced with some code to fetch from the flash chip.
2012-05-12 13:12:57 -05:00
James Cotton
836e34a483
Change revo sensors to update at 500 Hz and make sure in all cases it waits for
...
the relevant queue to provide data. Also disable the quaternion stabilization
flag.
2012-05-12 13:12:56 -05:00
James Cotton
2ca3cde83f
Improve EKF initialization. For some reason we must read an extra mag sample
...
when power up value of attitude algorithm is EKF. I don't understand why the
first mag value is bad.
2012-05-12 13:00:51 -05:00
James Cotton
98655aacc8
Fix initialization of the complimentary filter where it didn't get the right
...
initial dT
2012-05-12 13:00:50 -05:00
Brian Webb
1f5dbcf57c
Mostly complete PipX configuration GUI.
2012-05-11 17:51:18 -07:00
James Cotton
4ec4edd15c
When enabling position hold altitude mode take the throttle from before as the
...
"hover" throttle
2012-05-08 03:12:14 -05:00
James Cotton
2857b58f8e
Migrate path planner from position desired to path desired
2012-05-08 03:04:44 -05:00
James Cotton
37bb2cfb77
Finish getting rid of PositionDesired in favor of PathDesired and add the
...
ability to move the magic waypoint with the transmitter
2012-05-08 02:42:58 -05:00
James Cotton
a8bdd4a44a
Coalescene PositionDesired and PathDesired into PathDesired and add a mode
...
field to indicate how it should be interpreted.
2012-05-08 02:29:58 -05:00
James Cotton
27d1c4be93
Extend list of airframe types for VTOL guidance
2012-05-08 02:29:58 -05:00
James Cotton
cbedb5b53b
Move Guidance to VtolPathFollower to make room for FWPathFollower
2012-05-08 02:29:50 -05:00
James Cotton
0f2c41ac5d
Merge branch 'revolution' into navigation
...
Conflicts:
flight/Modules/ManualControl/manualcontrol.c
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2012-05-07 21:53:10 -05:00
James Cotton
6aa7142f5e
When guidance finds an incorrect airframe, delay 100ms to avoid hammering the
...
alarms
2012-05-07 12:55:35 -05:00
Sambas
dedbbec8f0
Make guidance support my Y6, also caused telemetry/usb RXdatarate go thru the roof (Guidance Warning). Almost impossible to change dataframe type to supported one with clean board.
...
USB interrupt fix.
Heap warning critical sizes backwards.
2012-05-07 12:51:07 -05:00
James Cotton
a40a0b0e31
Small fix to be able to build CC for Revo branch and to include revo in
...
package.
2012-05-07 01:55:52 -05:00
Brian Webb
454144f46c
Pairing and saving settings working.
2012-05-06 20:47:21 -07:00
Brian Webb
352471857f
Reverted USB configuration and switched all non-blocking COM calls to blocking, which appears to help prevent lockups now that all sends are in a different thread.
2012-05-06 15:07:07 -07:00
Brian Webb
ef4828032b
Fixed failed merge with next.
2012-05-06 12:38:13 -07:00
Brian Webb
480371a43e
Resolving merge with origin/next
2012-05-05 09:53:54 -07:00
Brian Webb
e83fec0463
Merged latest origin/next.
2012-05-05 09:40:44 -07:00
James Cotton
6c0dc80978
Shuffle more stack sizes around
2012-05-05 11:33:47 -05:00
Werner Backes
22df8310c4
Fixed typo in comment
2012-05-05 11:10:53 -05:00
Werner Backes
f52f5b3d83
Don't process RMC sentences that are flaged as 'void'
2012-05-05 11:10:45 -05:00
Werner Backes
6b463e5c9e
Check GGA NMEA sentence for no/invalid fix flag
2012-05-05 11:10:38 -05:00
Werner Backes
217860c187
Check for empty fields during lat/lon conversion (invalid GPS fix)
2012-05-05 11:10:32 -05:00
Brian Webb
44d95003f3
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-03 17:56:08 -07:00
James Cotton
3155324384
Merge branch 'next' into cc3d
...
Conflicts:
Makefile
ground/openpilotgcs/src/plugins/config/configahrswidget.cpp
shared/uavobjectdefinition/ahrscalibration.xml
shared/uavobjectdefinition/ahrssettings.xml
shared/uavobjectdefinition/attituderaw.xml
2012-05-03 16:31:49 -05:00
Brian Webb
249ededcfd
Added responding to OBJ_REQ and sending ACK/NACK on PipX.
2012-05-02 20:51:29 -07:00
Brian Webb
290acf0398
Fixed watchdog timeouts.
2012-05-01 20:48:35 -07:00
Brian Webb
217aad8c37
Now using read and write threads for both radio and com ports on PipX. Also cleaned up UAVTalk message handling.
2012-05-01 19:14:58 -07:00
Brian Webb
25ffb99cee
Added initialization of flash eeprom for saving settings to PipX.
2012-04-28 19:29:56 -07:00
James Cotton
fb53d5621a
Change the magKp term (hardcoded still) for revo complimentary filter so it
...
tracks magnetic north when homelocation is set.
2012-04-22 19:01:41 -05:00
James Cotton
2890fcdc9f
When in complimentary filter mode use GPSVelocity so event system doesn't have
...
warning.
2012-04-22 19:01:18 -05:00
Brian Webb
aab47d6ed4
Final updates to throttled mode and further memeory reduction in the object manager and event dispatcher to reflect smaller data sizes in metadata.
2012-04-22 14:56:26 -07:00
Brian Webb
ed1937958e
Changed PipX UAVTalkProcessInputStream calls to UAVTalkProcessInputStreamQuiet.
2012-04-22 08:45:01 -07:00
Brian Webb
f726cc6a9d
Added a RTC supervisor timer to RFM22B driver.
2012-04-21 18:31:49 -07:00
Brian Webb
eb6f175af4
Fixed metadata settings in object browswer, and removed update mode never from all uavobjects that used it (changed to manual).
2012-04-21 11:59:14 -07:00
Brian Webb
19166cc830
Added UPDATEMODE_THROTTLED to UAVObjects update modes.
2012-04-18 18:47:13 -07:00
Corvus Corax
1c3dc9c9e1
Airspeed: fixed calculation math - no more zero zone
2012-04-18 14:41:41 +02:00
Corvus Corax
d125abf335
Baro calibration
2012-04-18 10:48:31 +02:00
Brian Webb
62c5036220
Added PipXStatus and PipXSetting UAVobjects and some initial support for them.
2012-04-17 17:36:05 -07:00
Corvus Corax
3da88601a1
Airspeed module works, needs conversion
2012-04-17 20:32:56 +02:00
Corvus Corax
317cff10dd
debug code added - revert this when no longer needed
2012-04-17 18:59:46 +02:00
Corvus Corax
edf26d15e6
Airspeed: some more fixes
2012-04-17 16:38:53 +02:00
Corvus Corax
5159d2029b
new airspeed module - still needs matching PIOS driver from stac
2012-04-17 15:54:05 +02:00
James Cotton
ad074aee4b
Fix nasty bug in guidance where I missed some breaks
2012-04-16 08:59:25 -05:00
James Cotton
a7ba6d96c1
Allow guidance to run purely off raw GPS data
2012-04-15 16:23:34 -05:00
James Cotton
050c756d54
Merge branch 'revolution_path' into testing
2012-04-15 12:34:31 -05:00
James Cotton
4928cbba44
Merge branch 'sim' into testing
2012-04-15 12:34:27 -05:00
James Cotton
59da9deffb
Merge remote-tracking branch 'revo/D-Lite/ubx-parser' into sim
2012-04-15 12:33:54 -05:00
James Cotton
6a094ac326
Increase stack for the path planner
2012-04-15 12:31:50 -05:00
Corvus Corax
88f7567247
change to GPS: do not update UAVObject more than 1ce per cycle
2012-04-15 19:17:03 +02:00
James Cotton
85852df00b
Make simulation produce data asynchronously for testing and add random accel
...
bias
2012-04-15 11:51:42 -05:00
James Cotton
08fd08deb8
Fix some compiler warnings in guidance code
2012-04-15 11:51:26 -05:00
James Cotton
1559eeb2e1
Use GPSVelocity updates when they are available instead of timing based on
...
GPSPosition
2012-04-15 11:50:56 -05:00
James Cotton
b71e9fc9dc
Create simulated OveroSync module which simply drops updates to log file
2012-04-14 22:01:33 -05:00
unknown
0b7538c3fe
Constants changed to float for better portability.
2012-04-15 01:28:31 +02:00
James Cotton
9a2e0b071c
Revert "Allow simulated quadcopter to include GyroBias in the artificial sensor data."
...
This reverts commit 212a10bcd4
2012-04-14 17:20:01 -05:00
James Cotton
212a10bcd4
Allow simulated quadcopter to include GyroBias in the artificial sensor data.
2012-04-14 14:52:56 -05:00
James Cotton
af02eb6517
Merge branch 'sim' into testing
...
Conflicts:
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-04-14 14:40:43 -05:00
James Cotton
267e9fa87c
Merge branch 'revolution' into testing
2012-04-14 14:40:11 -05:00
James Cotton
a86e75bc99
Merge branch 'revolution' into sim
2012-04-14 14:12:03 -05:00
James Cotton
deb3336729
Make sure for revolution all the GPS objects are always initialized even if
...
there is no GPS port. Otherwise connecting to relevant queues will fail.
2012-04-14 14:02:20 -05:00
James Cotton
b7c3b1fdd1
Make the simulation provide GPSVelocity object since this is critical for EKF
...
now
2012-04-14 14:01:42 -05:00
James Cotton
ce6def870b
Add feedforward component to guidance
2012-04-14 13:38:10 -05:00
James Cotton
be21ec441e
Add ability to run guidance based on raw GPS velocity instead
2012-04-14 13:34:30 -05:00
James Cotton
1a98a46606
Merge branch 'revolution_ubx' into sim
2012-04-14 12:10:23 -05:00
James Cotton
5d160860a3
Fix from Corvus for gyro bias from EKF
2012-04-14 12:09:12 -05:00
James Cotton
3e2feb64cf
Fix bug limiting maximum velocity desired
2012-04-14 10:49:54 -05:00
Corvus Corax
84c3705390
use gyro scale and bias in sensor module
2012-04-14 14:01:28 +02:00
James Cotton
b0ef456ccb
Kickstart MPU6000 if there is no data
2012-04-13 20:29:41 -05:00
James Cotton
a0d1b00ade
Cover an edge condition for the MPU6000 IRQ not firing
2012-04-13 19:37:30 -05:00
Brian Webb
4936cd8fd2
Added PipXStatus and PipXSettings UAVObjects and added support the sending/receiving UAVTalk objects on the PipX.
2012-04-10 20:22:53 -07:00
James Cotton
a1351fcdbe
Make the path velocity come from the waypoint.
2012-04-10 02:56:10 -05:00
James Cotton
a42d756b3e
Add path navigation mode to the path planner module. I don't like how this is
...
done because the mode is in the settings so can't be command from path planner.
I.e. it would be nice to be able to say do these paths then go to position hold
mode.
2012-04-10 02:51:50 -05:00
James Cotton
1aec5b8deb
Add altitude control to the path navigation
2012-04-10 01:59:26 -05:00
James Cotton
26b73e3c8b
Add path navigation mode to guidance. Works well in simulation.
2012-04-10 01:48:03 -05:00
James Cotton
136bbe3814
Update the EKF code to use the GPSVelocity
2012-04-09 19:03:21 -05:00
James Cotton
dbcb47e249
Merge branch 'D-Lite/ubx-parser' into revolution_ubx
2012-04-09 17:34:34 -05:00
Werner Backes
4ede7a8af6
Experimental u-blox binary data format parser. See "u-blox 6
...
Receiver Description" for reference. Currently supports NAV-VELNED
message only and populates it to the GPSVelocity UAVObject.
2012-04-09 23:14:34 +02:00
Werner Backes
422944ce29
Experimental extension to the GPS stream parser to extract u-blox
...
binary data format. See "u-blox 6 Receiver Description" for
reference. GPS data stream may carry mixed NMEA and UBX data.
2012-04-09 23:12:24 +02:00
