rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-29 07:24:13 +01:00
Code Issues Releases Activity
12,870 Commits 5 Branches 8 Tags 266 MiB
8e8d08c4a1
Commit Graph

934 Commits

Author SHA1 Message Date
Alessio Morale
752f3447d2 OP-1683 - Implement an update skip strategy in single pulse mode when pulse period is higher than the update cycle 2015-02-02 02:58:22 +01:00
Alessio Morale
1d08083375 OP-1682 - OneShot125: Change timer clock to 2MHz (that's available as exact value for current targets), raise timer period to prevent glitches 2015-01-31 14:40:40 +01:00
Alessio Morale
632051c0ac OP-1683 - Increase resolution for OneShot125 running timer at 8MHz, setup automatically rates for OneShot 2015-01-30 21:22:00 +01:00
Alessio Morale
7955f63c98 OP-1683 - Clenaup, trigger update in setfailsafe, Fix standard pwm operation 2015-01-25 21:25:14 +01:00
Alessio Morale
dcc9a5b7dc OP-1683 - Actuator uses "standard" 1000-2000 range and remap it to 125-250 just before sending to servo to prevent any impact on gcs and other blocks 2015-01-24 13:37:00 +01:00
Alessio Morale
47e1312982 OP-1683 - Implement oneshot/oneshot125 mode to actuator module 2015-01-23 23:51:53 +01:00
Fredrik Arvidsson
c8c3a46735 Uncrustify 2015-01-09 21:49:03 +01:00
abeck70
2b6d79467c gpsassist:code review comments 
1. Defines
2. Name of adjustments changed to vtolSelfTuningStats
 2015-01-09 07:51:37 +11:00
abeck70
b1c94e83d0 gpsassist: One commit new branch 
Collapsed into one branch for a new code review.  Some unnecssary committed files removed.
 2015-01-08 13:20:47 +11:00
Fredrik Larsson
4f7fc1bac7 Merge remote-tracking branch 'origin/corvuscorax/OP-1599_positionvario-reworks' into next 2014-12-14 23:45:57 +11:00
Laurent Lalanne
8d08223e8a OP-1601 Don't use new PVT messages with CC/CC3D 2014-11-15 22:39:17 +01:00
Corvus Corax
5f352f54a3 OP-1599 updated defaults for position roam mode settings, do not low pass filter throttle 2014-11-10 19:06:27 +01:00
Corvus Corax
8fe21ed297 OP-1599 removed autotune from all flight code 2014-11-08 16:17:39 +01:00
Corvus Corax
c0e66a8acf OP-1599 renamed flightmodes 2014-11-08 16:01:59 +01:00
Corvus Corax
3e5c5bd140 OP-1599 added new mode "courselock" in handlers where missing 2014-11-08 14:04:00 +01:00
Corvus Corax
7d2ca3d92f OP-1599 added course lock mode, renamed other position vario modes 2014-11-08 12:59:55 +01:00
Alessio Morale
6a2666381f OP-1588 - Improve manualcontrol assumptions to be easier to mantain 2014-11-01 17:54:54 +01:00
Alessio Morale
e04825e7b7 OP-1588 - Remove *relay flight modes 2014-11-01 16:11:11 +01:00
Alessio Morale
b3b2d1ef02 OP-1584 - Remove some unused big UBX messages when running with GPS_MINIMAL 2014-11-01 16:00:03 +01:00
Alessio Morale
c0ca20f661 OP-1584 - Remove auxmagsupport from cc3d for now as it is unused, remove other stuffs from ubx when GPS_MINIMAL is selected 2014-10-31 19:56:38 +01:00
Corvus Corax
d0417dda84 OP-1573 fix armhandler to not timeout-disarm when flying autonomously 2014-10-29 21:12:57 +01:00
a*morale
7c1265ee30 OP-1548 - Change Fusion algorithm names to make clear their pourpose 2014-10-21 00:49:00 +02:00
Alessio Morale
a9f35e2afe Merge branch 'amorale/OP-1535_mpu_overhaul' into next 2014-10-16 00:51:02 +02:00
Alessio Morale
3ac2874687 OP-1540 - sha1sum was not sent correctly by GPS V9 2014-10-15 00:58:34 +02:00
Alessio Morale
15cd40a907 Merge remote-tracking branch 'origin/skarlsso/OP-1534_add_expo_and_acro_insanity_factor_to_txpid' into next 2014-10-14 21:43:59 +02:00
Alessio Morale
5d074063d1 OP-1535 - Add board specific sensor update rate constant 2014-10-14 05:38:57 +02:00
Fredrik Arvidsson
0fd9758e0c OP-1525 Gaah. 2014-10-12 15:01:34 +02:00
Fredrik Arvidsson
118209e40d OP-1525 Updated comment. 2014-10-12 14:59:41 +02:00
Alessio Morale
f2fc5f5616 OP-1513 - Fix time constants, set initial temperature as first sample value 2014-10-11 23:54:21 +02:00
Alessio Morale
9499cf9abc OP-1535 - Some optimizations for attitude module 2014-10-11 09:57:07 +02:00
Alessio Morale
9350bd65d9 OP-1535 - change sensor rate to 1KHz with software downsample to 500Hz 
Allow per board SPI prescaler settings
 2014-10-10 22:33:49 +02:00
Alessio Morale
c1062124af OP-1531 - Add temperature filtering for baro compensation 2014-10-10 22:33:47 +02:00
Alessio Morale
46fee43487 OP-1531 Filter temperatures for gyro and accel calibration. calculate new bias every 30 samples 2014-10-10 22:33:42 +02:00
Stefan Karlsson
c03d390269 OP-1534 Update both roll and pitch with TxPID Roll+Pitch.Expo option 2014-10-10 18:49:18 +02:00
Stefan Karlsson
bedb749f72 OP-1534 Add expo and acro insanity factor to TxPID 2014-10-10 17:57:24 +02:00
m_thread
19a7f4cd22 OP-1525 Changed some boundaries in firmware code. 2014-10-10 13:56:11 +02:00
m_thread
bb4d271799 OP-1525 Made the Expo magic number a constant and changed it to 1.00695f. 
Changed n the firmware code to match the GCS side.
 2014-10-10 12:26:22 +02:00
Corvus Corax
270f6d87cd OP-1516 changed handling of integrals in acrop 2014-10-06 17:47:16 +02:00
Corvus Corax
b05bd2fb34 OP-1516 fixed boundf mistake 2014-10-05 21:07:06 +02:00
Corvus Corax
9525398deb OP-1516 use fastPow implementation for expo - to make it work on cc3d 2014-10-05 01:25:15 +02:00
Corvus Corax
bdb5c88d08 OP-1516 added bank configurable expo to stick to allow snappier rate response 2014-10-03 19:07:47 +02:00
Corvus Corax
ac0fccc10a OP-1516 re-introduce sanity to Acro+ 2014-10-03 15:44:02 +02:00
Corvus Corax
17f187468c Merge remote-tracking branch 'origin/next' into corvuscorax/OP-1516_acro+ 2014-10-03 12:34:35 +02:00
Alessio Morale
8e2e534c60 Uncrustify/clean commented code 2014-10-03 11:41:26 +02:00
Alessio Morale
21156dbb9e Merge remote-tracking branch 'origin/amorale/OP-1515_fix_attitude_fifo_fixed' into next 2014-10-03 11:12:10 +02:00
Alessio Morale
55402880bc Revert "Merge remote-tracking branch 'origin/amorale/OP-1515_fix_attitude_fifo' into next" 
This reverts commit 316f7fcf02, reversing
changes made to cfa0ef4671.
 2014-10-03 11:11:27 +02:00
Alessio Morale
e553014596 Merge branch 'amorale/OP-1476_1477_1275_GPSV9_pios_firmware_bootloader' into next 2014-10-03 00:37:55 +02:00
Alessio Morale
9cfd55d006 Merge branch 'amorale/OP-1507_gps_module_cpu_optimization' into next 2014-10-03 00:37:39 +02:00
Corvus Corax
a12e2708a2 OP-1516 fixed obvious issues 2014-10-02 23:38:06 +02:00
Corvus Corax
dcb354b0b1 OP-1516 Enable PiroComp per setting 2014-10-02 22:42:08 +02:00
Corvus Corax
3ad47bfa0a OP-1516 added Acro+ stabi mode 2014-10-02 22:13:10 +02:00
Alessio Morale
a5fd040b49 OP-1515 - Attitude module was not reading all gyro/accel fifo items causing it to lag behind by at least a sample 2014-10-01 21:13:44 +02:00
Alessio Morale
ae9f30c729 OP-1477 - Fix mag exti config, set correct rate, set correct SPI speed for hmc5x83. Note: GPIO is disabled as it seems there is some issues with Exti on PB0 2014-10-01 02:07:46 +02:00
Alessio Morale
0ffb99f228 OP-1477 - Fix issue with quick request to DDC port, change baud rate to 57600, fix sys rate, optimize uart tx 2014-10-01 02:06:03 +02:00
Alessio Morale
c1641613ce OP-1515 - Attitude module was not reading all gyro/accel fifo items causing it to lag behind by at least a sample 2014-09-30 15:12:37 +02:00
Alessio Morale
b2aa73acf6 Merge remote-tracking branch 'origin/amorale/OP-1499_autoconfig_retries' into next 2014-09-29 21:30:16 +02:00
Alessio Morale
9e0596c2c5 Merge remote-tracking branch 'origin/amorale/OP-1379_ext_led_notification_module_new' into next 
Conflicts:
	Makefile
	flight/targets/boards/discoveryf4bare/firmware/Makefile
	flight/targets/boards/revolution/firmware/Makefile
 2014-09-29 21:26:31 +02:00
Alessio Morale
5054bda433 OP-1477 - Fix SYS message rate 2014-09-28 20:29:52 +02:00
Alessio Morale
f2058dfc7f OP-1477 - Remove hardcoded strings for initialization config 2014-09-28 15:01:19 +02:00
Alessio Morale
4c76620402 OP-1507 - Reduce memory usage for CopterControl 2014-09-27 22:40:17 +02:00
Alessio Morale
d0b37bab28 OP-1507 - Handles GPS data a chunk at time instead of a single byte at time. 2014-09-27 00:17:00 +02:00
Alessio Morale
78756f6873 OP-1499 - Failed Autoconfig will raise an Error Alarm. When AC does start it will reset any previous ack. Force update to Autoconfig Status in GPSPositionSensor UAVO. Add a small pause between each config step 2014-09-24 06:12:48 +02:00
Alessio Morale
8712a1dfdc OP-1477 - Board support for updated SYS message 2014-09-24 01:06:49 +02:00
Alessio Morale
c772442723 OP-1477 - remove debug infos and add send some relevant informations using SYS message (firmware and board revision/info) 2014-09-24 01:06:41 +02:00
Alessio Morale
7e78194e12 OP-1477 - change led rate so that's less annoying 2014-09-23 20:27:10 +02:00
Corvus Corax
ca7a3e4333 Merge branch 'next' into corvuscorax/OP-1483_leaky-integrals-and-post-filtering 2014-09-23 13:54:33 +02:00
Werner Backes
b621df59f2 Merge remote-tracking branch 'origin/D-Lite/OP-1483-PathFollower-DisablePosKi' into next 2014-09-23 13:33:32 +02:00
Fredrik Larson
c36e9a9122 Merge remote-tracking branch 'origin/thread/OP-1474_PID_Scaling_Banks' into next 2014-09-23 06:20:34 +10:00
Fredrik Larsson
b93a7a9dce Arming for Helis on Revo 2014-09-23 05:35:35 +10:00
Alessio Morale
0885fda926 OP-1499 - CFG-CFG mask was incorrect (nav is 0x02, not 0x01) 2014-09-22 00:56:49 +02:00
Corvus Corax
41e062373d OP-1483 enable postfilter for indoor mode for filter debugging, change default filter alpha coefficient to 0.999 2014-09-21 19:26:01 +02:00
Alessio Morale
a5ebf36425 OP-1499 - Replay the configuration sequence in case of gps disconnection, add retry logic in case of errors 2014-09-21 16:38:52 +02:00
Alessio Morale
cedb4f127d OP-1477 - typos and other fixes from review 2014-09-20 20:58:40 +02:00
Corvus Corax
76f94e13ef Revert "OP-1483 implement leaky integral on position control loop in pathfollower (vtol only)" 
This reverts commit 1a0ab29050.
 2014-09-20 13:45:45 +02:00
Corvus Corax
b315c8f106 OP-1483 Added velocity filter to correct EKF's velocity estimate for static velocity offsets 
(caused for example by sensor disagreement or calibration issues)
 2014-09-19 16:34:20 +02:00
Corvus Corax
1a0ab29050 OP-1483 implement leaky integral on position control loop in pathfollower (vtol only) 2014-09-19 15:52:11 +02:00
m_thread
226fe186c4 Merge branch 'skarlsso/OP-1474-PID_Scaling_one_factor' of ssh://git.openpilot.org/OpenPilot into thread/OP-1474_PID_Scaling_Banks 2014-09-19 15:15:52 +02:00
Stefan Karlsson
b3e7a23f4f OP-1474 Demultiplex TPS settings when pid banks are updated 2014-09-19 15:12:07 +02:00
Stefan Karlsson
9a21eed71e OP-1474 Make it possible to select axes to scale 2014-09-19 15:11:15 +02:00
m_thread
3b1e67d185 Merge remote-tracking branch 'origin/next' into thread/OP-1474_PID_Scaling_Banks 
Conflicts:
	ground/openpilotgcs/src/plugins/config/stabilization.ui
 2014-09-19 09:01:02 +02:00
Stefan Karlsson
f0c47976a5 OP-1474 Fix label compile error 2014-09-19 01:29:04 +02:00
Stefan Karlsson
31c5f1c519 OP-1474 Make it possible to select the combination of P, I, and D to scale 2014-09-19 01:16:49 +02:00
Stefan Karlsson
d3e7ef300f OP-1474 Use PID banks for the TPS settings 2014-09-19 01:05:08 +02:00
Werner Backes
c90973cb99 Removed the now unused position Ki from VtolPathFollowerSettings UAVObject 2014-09-18 17:01:50 +02:00
Alessio Morale
46ef59f186 OP-1379 - Rebuild and simplify the queuing mechanism 2014-09-17 01:24:01 +02:00
Alessio Morale
eb15939031 OP-1477 - typo in mallocFailed trap 2014-09-17 00:21:32 +02:00
Alessio Morale
2cca5162f7 OP-1477 - a bit of cleanup, some flash bits moved to a separate file 2014-09-16 23:02:53 +02:00
Alessio Morale
2885a20acb OP-1477 - add watchdog support 2014-09-16 22:51:28 +02:00
Alessio Morale
2f50dbeee5 OP-1477 - Split and cleanup gpssys module 2014-09-16 22:40:55 +02:00
Alessio Morale
cac463e623 OP-1477 - various changes 
- move to UBX libraries;
- remove configuration (it will be done by Revo);
- set speed at 115200;
- Change sysmod rate;
 2014-09-16 22:40:55 +02:00
Alessio Morale
50d4a97c0c OP-1477 - GPS SYS: for multi device support of HMC5x driver 2014-09-16 22:40:55 +02:00
Alessio Morale
c232985baa OP-1477 - initial framer + autoconfiguration and some fixes 
- Added a framing code for gps data to be able to interleave mag sentences.
 - Fix fields definition, set structures used to send UBX data as packed to fix issues with alignments,
 - change axis orientation to match revo when both boards conector sides are are aligned
 2014-09-16 22:40:54 +02:00
Alessio Morale
28f3ca9a17 OP-1477 - Use UBX_DDC driver 2014-09-16 22:40:54 +02:00
Alessio Morale
11522ccbb0 OP-1477 - move to PIOS_I2C 2014-09-16 22:40:54 +02:00
Alessio Morale
36bb58755b OP-1477 - add support for SPI/MAG 2014-09-16 22:40:54 +02:00
Alessio Morale
1fa2bfddc6 OP-1477 - Add GPS System Module 2014-09-16 22:40:54 +02:00
Alessio Morale
ff82d50ee0 OP-1275 add an APP_MINIMAL flag that optionally omits most of the stuffs (flight related stuffs and sensors for example) 2014-09-16 00:42:49 +02:00
Alessio Morale
c49497f2e0 Merge branch 'amorale/OP-1434_GPSV9_fc_support' into next 2014-09-15 23:49:54 +02:00
Alessio Morale
ece0d64c9f OP-1434 - Update a (old, now wrong) comment 2014-09-15 15:27:19 +02:00
Alessio Morale
3e785cf929 OP-1434 - Use vector_lengthf, fix a typo in a comment 2014-09-14 21:44:41 +02:00
Stefan Karlsson
bdbe875a90 OP-1474 Use ActuatorDesiredThrust as default source for TPS 2014-09-14 16:08:21 +02:00
Werner Backes
80b6757ea6 Don't use I-term in the VtolPathFollower's position control loop for now. 
See OP-1483 for why it's considered not to work as expected.
 2014-09-14 15:39:13 +02:00
Alessio Morale
3fd5ca08cd OP-1434 - Switch to common aux mag support library 2014-09-13 16:15:02 +02:00
Stefan Karlsson
662b29ac05 OP-1474 Include I in the scaling and let the TPS factor piggyback on the speedScaleFactor 2014-09-10 22:49:49 +02:00
Stefan Karlsson
7afb211330 OP-1474 Revert TPS debugging code 2014-09-10 00:42:40 +02:00
Alessio Morale
c777f9e194 OP-1406 - Fixes from review comments 2014-09-08 23:24:18 +02:00
Stefan Karlsson
c0152b7e19 OP-1474 Thrust PID scaling 2014-09-08 00:14:49 +02:00
Corvus Corax
4a19f98c95 OP-1156 hotfix in pathfollower code - use correct VerticalPosPI.Ki and ILimit + uavobject typo 2014-09-06 13:51:30 +02:00
Alessio Morale
233dec6d8d OP-1379 - Various fixes and additions 
- Support blocks of led for notification (that is a certain number of leds between a min and a max index);
- Fix an issue with bogus colours on fast updates at LED N°0.
- Add NOTIFY_SEQUENCE_NULL to skip handling a specific alarm status;
- Adjust sequences and add Config and Receiver Alarms;
- fix issue with Alarm trigger/repetition;
- Enables Notify module only if a WS281x output is enabled.
- Add some documentation for sequence/alarm definitions (sequences.h)
- Make sequences more coherent. All GPS related info are now shown in green.
- Revert to original blinking rate for onboard led
- add Notify on DiscoveryF4Bare target
 2014-09-06 12:11:53 +02:00
Alessio Morale
884f797d61 OP-1370 - Add SBAS configuration options 2014-09-02 21:26:56 +02:00
Alessio Morale
2ddbb72bcf OP-1370 - Fixes parameters name, values and cosmetic issues. 2014-09-02 21:26:43 +02:00
Alessio Morale
78662eb356 OP-1370 - Explicitly disable unneeded messages 2014-09-02 00:36:04 +02:00
Alessio Morale
3157c4e501 OP-1370 - Fix configuration storage on GPS 2014-09-02 00:35:26 +02:00
Alessio Morale
4715219a4b OP-1434 - Enable magFilter for CF as it is needed to get Mag data for initial estimation 2014-08-31 23:39:30 +02:00
Corvus Corax
b64326208e Merge branch 'next' into corvuscorax/OP-1456_struct_to_array_improvement 2014-08-31 18:43:48 +02:00
Philippe Renon
575e89f1a1 OP-1319 fixed minor spelling mistake in firmware code 2014-08-30 18:09:23 +02:00
Alessio Morale
f69e476ed3 Merge branch 'amorale/OP-1452_comusbbridge_improvements' into next 2014-08-29 20:25:29 +02:00
Alessio Morale
8418804ce4 OP-1406 - Revert magstate to non normalized values 2014-08-25 16:00:33 +02:00
Fredrik Larson
35a6807e63 Merge branch 'txpid_typo' into next 2014-08-24 10:23:14 +10:00
Laurent Lalanne
ccb97f014c OP-1241 TxPID_Bank3 : Similar bug while GET data from bank 2014-08-24 02:15:24 +02:00
Corvus Corax
6faf1a73ac OP-1456 get rid of cast_struct_to_array because it is error prone! 2014-08-24 00:16:34 +02:00
Corvus Corax
e7aa12be94 Merge remote-tracking branch 'origin/corvuscorax/OP-1454_weakleveling-hotfix' into next 2014-08-23 15:25:24 +02:00
Alessio Morale
1d3f9399c3 OP-1370 - Fix sensortype not shown for non PVT GPSs 2014-08-22 23:35:13 +02:00
Alessio Morale
5a3ea5fde0 OP-1370 - Add an option to store the configuration onto GPS 2014-08-22 23:16:38 +02:00
Corvus Corax
c5e0e58e6a OP-1454 - fix weak leveling bug 2014-08-22 22:42:12 +02:00
Alessio Morale
5bf866c96e OP-1370 - Remove autoconfig from CC (removing sat info to spare some ram and adding autoconfig does not make much sense), fixed compilation for all other targets 2014-08-22 22:34:52 +02:00
Alessio Morale
c4d5234ee6 OP-1370 - Show AutoConfig status in GPSPositionSensor 2014-08-22 22:32:57 +02:00
Alessio Morale
69b76b665c OP-1370 - Add automatic sentence rate configuration based on HW version (llh+velned etc. vs PVT) 2014-08-22 21:27:50 +02:00
Alessio Morale
f430af83c5 OP-1370 - Add configuration support for nav rate and dynamic model. 
Added stub for sentence rate configuration (enable_sentences(...))
 2014-08-22 19:00:46 +02:00
Alessio Morale
1846806d17 OP-1370 - Refactor AutoConfig code out of UBX.* 2014-08-22 10:10:21 +02:00
Alessio Morale
903a77669e OP-1370 - Add "management tasks" support for UBX, used for self configuration. 
Initial state machine asking for gps version. Configuration messages definition
 2014-08-22 02:43:30 +02:00
Alessio Morale
c6a82c5d23 OP-1370 - refactors UBX code to use a table of messages and handler instead of neverending switches 2014-08-21 19:34:36 +02:00
Alessio Morale
002c35163a OP-1370 - Add support for mon-ver ack-ack and ack-nak messages for gps hw version detection 2014-08-21 19:34:36 +02:00
Alessio Morale
b6c053565e OP-1434 - use degrees for rotation, fix Calibration gui 2014-08-21 19:34:36 +02:00
Alessio Morale
85be5ba7af OP-1434 - handle mag rotation 2014-08-21 19:34:36 +02:00
Alessio Morale
8df34b01d7 OP-1434 - Fix heapremaining data type 2014-08-21 19:34:36 +02:00
Alessio Morale
0198129a1c OP-1434 - Add 230400 to GPS port speed list 2014-08-21 19:34:36 +02:00
Alessio Morale
ce1e4e728e OP-1434 - Support for mag calibration 2014-08-21 19:34:36 +02:00
Alessio Morale
397bfdc08b OP-1434 - Add support for OP custom sentences on flight board 2014-08-21 19:34:36 +02:00
Alessio Morale
83a3822798 OP-1406 - Reenable mag offset estimation for onboard mag only right now 2014-08-21 19:34:35 +02:00
Alessio Morale
84758a6731 OP-1406 - Always feeds mag data even if invalid 2014-08-21 19:34:35 +02:00
Alessio Morale
e511190ad3 OP-1406 - Improve handling of external magnetometer, add additional settings 2014-08-21 19:34:35 +02:00
Alessio Morale
9d7a493c26 OP-1406 - Allows filtermag to switch between onboard and aux mag 2014-08-21 19:34:35 +02:00
Alessio Morale
bb085ddab9 OP-1452 - Auto enable COMBridge module if a port is configured as ComBridge 2014-08-21 11:43:36 +02:00
Alessio Morale
8940b7a50b OP-1452 - Apply ComBridge port speed change without rebooting 2014-08-21 11:42:29 +02:00
Corvus Corax
4653c77296 OP-1156 removed old pathfollower implementations 2014-08-20 17:00:50 +02:00
Corvus Corax
1540fe0716 OP-1156 cleaned up updateAutoPilotVtol() function 2014-08-20 16:02:48 +02:00
Corvus Corax
70460e593e OP-1156 fixes as suggested per review 2014-08-20 15:29:29 +02:00
Corvus Corax
760ae118e9 OP-1156 changed yaw math from interval [0..360] to [-180..180] 2014-08-16 20:48:56 +02:00
Corvus Corax
8daa5dfa12 Merge branch 'next' into corvuscorax/OP-1156_pathfollower-unification 2014-08-16 13:58:40 +02:00