rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-03 11:24:10 +01:00
Code Issues Releases Activity
7,200 Commits 5 Branches 8 Tags 266 MiB
9b9d0c0d1e
Commit Graph

3221 Commits

Author SHA1 Message Date
James Cotton
42bbd52d68 PID: Add a function to set the cutoff for the derivative term 
Also contains a term for setting the deriative setpoint in the future
 2012-09-11 12:27:41 -05:00
James Cotton
86422b8b9e VtolPathFollower: Make sure to clear the alarm when running so it doesn't show as 
uninintialized
 2012-09-11 02:34:31 -05:00
James Cotton
88b483f37d PIOS_MPU6000: Make the driver perform the rotation to bring it into the OP 
coordinate system

Previously there were hacks spread throughout to deal with various ways of
positioning the chips.  Now the driver structure specifies the rotation
of the chip relative to the board layout and the output X/Y/Z are already
in OP convention.

This flag seems to do the right thing for Revolution, CC3D, and RevoMini
 2012-09-11 01:46:22 -05:00
James Cotton
4cbaa6df88 Revolution: Misses some files for stabilization refactoring in Revolution 2012-09-11 01:44:40 -05:00
a*morale
cf7aea6499 Support for Led Outputs as actuator channels 9&10. 
Added the ARMING LED  and INFO LED option for actuator channel
 2012-09-10 20:14:24 -05:00
a*morale
316e02612e mapped LED1&2 ports to output 9&10 so that it is possible to use as accessory or pwm buzzer 2012-09-10 20:14:15 -05:00
James Cotton
aaaf23e64c ManualControl: Cover the case for PathPlanner to avoid setting an alarm. No functional change. 2012-09-10 20:12:58 -05:00
James Cotton
5211176f15 ManualControl: Cover the case for PathPlanner to avoid setting an alarm. No functional change. 2012-09-10 20:12:23 -05:00
James Cotton
38e9d105aa Merge branch 'pidt1' into test2 
Conflicts:
	flight/Modules/ManualControl/inc/manualcontrol.h
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	shared/uavobjectdefinition/flightstatus.xml
	shared/uavobjectdefinition/hwsettings.xml
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-09-10 14:37:52 -05:00
James Cotton
386a9d41ef Merge branch 'next' into test2 
Conflicts:
	ground/openpilotgcs/src/plugins/config/configrevowidget.cpp
	ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
	ground/openpilotgcs/src/plugins/uavobjects/uavobjecttemplate.m
 2012-09-10 14:29:26 -05:00
James Cotton
fa9a616b4c PID: Add the 20 Hz low pass filter to the derivative term 2012-09-10 03:14:02 -05:00
James Cotton
9763a70364 Merge remote-tracking branch 'origin/igor/pidt1' into relay_tuning 
Conflicts:
	flight/Modules/Stabilization/stabilization.c
 2012-09-10 03:10:26 -05:00
Igor Van Airde
8ca99739ed Changed rate controller from PID to PIDT1 to improve flight stability. 
Low pass on D-Term makes the D-Term usable to improve flight stability.
Affects rate and stabilize mode.
 2012-09-09 13:07:25 +02:00
James Cotton
f3f07682ac RFM22b radio.c: Increase the stack side for the status task which runs the ISR 2012-09-08 12:43:01 -05:00
James Cotton
527edcbee9 RFM22b: Get rid of the burst read commands and do a block transfer 2012-09-08 12:39:14 -05:00
James Cotton
1f0004e9db RFM22b: Abstract out the port into the driver initiation 
Also use a separate function to claim the bus semaphore and
assert the CS line.
 2012-09-08 12:38:54 -05:00
Werner Backes
2a4e135c81 Merge branch 'D-Lite/fix_CC3D_yawBias_correction' into next 2012-09-06 13:47:03 +02:00
Werner Backes
4803dfe99c Fix: yaw bias correction wasn't applied on CC3D. 2012-09-06 13:13:58 +02:00
Stacey Sheldon
97882dbef9 pipx: ensure pipx BL image is padded to fill its bank 
This padding is required in order to properly align all
of the sections in the EF images.
 2012-09-05 22:17:04 -04:00
Stacey Sheldon
803e3c4d1e ef: Add fwinfo to entireflash (EF) images 
EF images were missing the firmware info blob that describes
which firmware is installed on the board.  The EF image is now
padded out to fill the firmware bank and the info blob is
properly placed at the tail end of the firmware bank.
 2012-09-05 21:45:59 -04:00
James Cotton
68fa464ccf RM: Make the direction of the TX/RX lines come from the configuration file 2012-09-04 23:22:56 -05:00
James Cotton
2f65fc1e8e Merge branch 'next' into relay_tuning 
Conflicts:
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-09-04 10:43:04 -05:00
James Cotton
844d14e2f5 RM (NOT FOR PIPX) Properly select the GPIO->RX/TX mapping 2012-09-04 10:22:04 -05:00
James Cotton
113c3d3b76 RM Telem: Make sure it properly tracks the outgoing rate of bytes 2012-09-04 10:20:51 -05:00
James Cotton
0b947b243d Revert "RFM22b: More block claims for rfm22_txStart" 
This reverts commit fa4ca426abf5671fc7d0b7206f85f14bcbf92c3d.
 2012-09-02 22:44:58 -05:00
James Cotton
dce4f36328 RFM22b: More block claims for rfm22_txStart 
Warning: This patch makes the modem work more poorly
 2012-09-02 22:44:58 -05:00
James Cotton
61ff335eaa RFM22: No need to poll the ISR from two tasks in radio.c 2012-09-02 22:44:58 -05:00
James Cotton
db083aa0e9 Merge branch 'android' into next 2012-09-02 19:19:23 -05:00
James Cotton
311bbcb539 RFM22b: Block transfers for more large SPI transfers 
Preallocated buffers with various preambles etc.  Used SPI_TransferBlock for
anything over a few bytes instead of burstWrite.  Also make more of the
communications wrappered in a large semaphore grab using a new rfm22_write_noclaim()

Still needs work - probably because most of the methods to repeated calls they should
all use the noclaim, or more specifically that function becomes rfm22_write/read.
 2012-09-02 14:35:56 -05:00
James Cotton
588297806c RFM22b: Use SPI block transfers for filling the RFM22b FIFO 
Also removed the disable irq line since that was introducing
flight glitches.
 2012-09-01 21:24:42 -05:00
James Cotton
997319ae80 RFM22b: Begin doing blocks of transfers when possible between semaphore claims 
The abstraction should probably be improved but ideally we start using
the DMA SPI transfers for PipX and grabbing/releasing the semaphore less
frequently (e.g. not for each 1-2 bytes).
 2012-09-01 21:07:38 -05:00
Brian Webb
27fedee3d3 Just return an initialization failure in the radio module when the RFM22B fails to initialize rather than asserting. 
Signed-off-by: James Cotton <peabody124@gmail.com>
 2012-09-01 19:15:13 -05:00
Brian Webb
fcbf01fa74 RFM22b: Added SPI initialization back into PipX pios_board.c. 
Signed-off-by: James Cotton <peabody124@gmail.com>
 2012-09-01 19:14:36 -05:00
James Cotton
d9ec6454c2 PipX: Since we are calling the PipX ISR from user space looks ensure the frequency stays correct. 
Previously it was polling too fast and the PipXStatus was incorrect as a result.  Now make
sure the stats loop only runs at 500 ms.
 2012-09-01 19:13:11 -05:00
James Cotton
c9f66f5145 Merge branch 'revo' into revo-mini 
Conflicts:
	androidgcs/AndroidManifest.xml
	androidgcs/res/layout/gcs_home.xml
	androidgcs/res/values/strings.xml
	androidgcs/src/org/openpilot/androidgcs/AttitudeView.java
	androidgcs/src/org/openpilot/androidgcs/HomePage.java
	flight/PipXtreme/System/pios_board.c
	ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
	shared/uavobjectdefinition/taskinfo.xml
 2012-09-01 16:57:27 -05:00
James Cotton
6bfb2a5e45 Merge branch 'next' into revo 
Conflicts:
	ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/mapgraphicitem.cpp
	ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/mapripper.cpp
	ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/waypointitem.cpp
	ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/waypointitem.h
	ground/openpilotgcs/src/libs/utils/coordinateconversions.cpp
	ground/openpilotgcs/src/libs/utils/coordinateconversions.h
	ground/openpilotgcs/src/plugins/opmap/opmap.pro
	ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
	ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.h
	ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
	shared/uavobjectdefinition/taskinfo.xml
	shared/uavobjectdefinition/waypoint.xml
 2012-09-01 16:18:03 -05:00
James Cotton
878def305f RM: Make radio an optional module 2012-09-01 11:11:52 -05:00
James Cotton
0d3b0d4e5b Fixup: Disable binding on mainport for DSM 2012-09-01 11:11:28 -05:00
James Cotton
f3327e3993 RM: Enabled optional modules and got the battery module working again. 
Changed the hardcoded (ick) battery lines for RM.  Also removed the reference
to PIOS_ADC_GetPin(4) as that pin is no longer available.  Finally
changed the default FlightBatterySettings to work out of the box
for the standard recommended sensors.
 2012-09-01 11:03:32 -05:00
James Cotton
a33f415866 RM DSM: Get DSM working on the mainport 
Because of the inverter this does not support binding on this port.
 2012-08-31 11:08:43 -05:00
James Cotton
300cee44b4 RM SBUS: There is no pull down on the inverter direction so when not SBUS must explicitly set to off. 2012-08-31 11:01:34 -05:00
James Cotton
d333e24a43 RM: Swap to using the CC_ flags for the flexi port too. 2012-08-31 10:30:00 -05:00
James Cotton
73c7190077 RM GPS: Use the CC_MainPort instead of a RV flag and enable GPS support 2012-08-31 10:17:10 -05:00
Brian Webb
6b3934576a Fixed configuration of PipX com port as UAVTalk. 2012-08-26 11:18:23 -05:00
James Cotton
bdd50ce66b Reenable the flash system 2012-08-26 05:03:05 -05:00
James Cotton
b888a137f0 TOFIX: Temporarily remove the transaction lock from the settings as it was causing a deadlock with the radio coms. 2012-08-26 05:02:14 -05:00
James Cotton
042055b29a RFM22b: Call the pendingISR routine from all the user space tasks. Got a valid connection with this. 2012-08-26 04:18:17 -05:00
James Cotton
f7cda1c0c4 RFM22b: No need to initialize the SPI. Done already. 2012-08-26 02:42:18 -05:00
James Cotton
477385ca25 RFM22b: Start to move the ISR into userspace 2012-08-26 02:41:19 -05:00
James Cotton
b1bd6d8583 PIOS_RFM22b: No need to set the SPI clock speed in the RFM22b module - it can be set by the driver configuration. 2012-08-26 00:00:39 -05:00
James Cotton
27c46c78b2 Increase the RFM22b/Flash rate to 10MHz which is within tolerance for both. 2012-08-25 23:17:53 -05:00
James Cotton
84d327c46a RFM22b: Claim the bus semaphore before reading and writing. 2012-08-25 23:17:52 -05:00
James Cotton
2bb4f860e1 Shuffle around the PACKET_HANDLER definition so we can more easily disable the Radio module. 2012-08-25 22:58:11 -05:00
James Cotton
06154836c6 Define the RADIO_BUILTIN in config file 2012-08-25 19:31:48 -05:00
James Cotton
4014445cc9 Fix the IRQ line for the RFM22b 2012-08-25 19:10:16 -05:00
James Cotton
3a3fc3d124 Make the radio module builtin 2012-08-25 18:48:41 -05:00
James Cotton
a7b5fcd77c Monitor the radio threads 2012-08-25 18:48:30 -05:00
James Cotton
9e25e887c2 Temporarily disable flash chip and configure SPI for modem. 2012-08-25 18:43:13 -05:00
James Cotton
ad7a9b9cc3 Switch the order of the SET_RC pins for flash and rfm22b 2012-08-25 17:49:15 -05:00
James Cotton
b95a78cde5 Roll back changes on the revo target 2012-08-25 17:33:14 -05:00
James Cotton
81ddbda972 Sensors: Scope some variables to suppress warnings 2012-08-25 17:30:04 -05:00
James Cotton
76bdb190d8 Link in the rfm module to the target 2012-08-25 17:27:17 -05:00
James Cotton
daad1d6f8f Sensors: Scope some variables to suppress warnings 2012-08-25 17:12:37 -05:00
James Cotton
982750a58f Merge remote-tracking branch 'revo/brian/revo_link' into revo-mini 
Conflicts:
	ground/openpilotgcs/src/plugins/plugins.pro
 2012-08-25 15:05:47 -05:00
James Cotton
a9b48cf1ca Merge remote-tracking branch 'revo/amorale/revolution_baro_fixes' into revo 2012-08-25 14:55:23 -05:00
James Cotton
5c34412200 Merge remote-tracking branch 'revo/amorale/revolution_baro_fixes' into revo-mini 2012-08-25 14:55:10 -05:00
Brian Webb
b3dc617702 Fixed PPM output from updated RadioComBridge module. 2012-08-25 12:52:06 -07:00
James Cotton
c5fda8208b TOFIX: For now hardcode a reversed orientation of MPU6000 for RevoMini 2012-08-25 14:41:03 -05:00
Brian Webb
e602b73a6f Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs. 
Conflicts:

	flight/Modules/RadioComBridge/RadioComBridge.c
	flight/PipXtreme/System/pios_board.c

Conflicts:

	flight/Modules/RadioComBridge/RadioComBridge.c
 2012-08-25 12:29:02 -07:00
James Cotton
c3906cfe90 Reenable the other main modules 2012-08-25 14:22:06 -05:00
James Cotton
0decce582b Got all the sensors reading 2012-08-25 14:19:15 -05:00
James Cotton
31ebb7bbd8 Remove the old BMA180 and L3GD20 code and fix the irq lines for the sensors. 2012-08-25 13:51:52 -05:00
James Cotton
2edc976168 Fix the VBUS sense pin 2012-08-25 13:46:55 -05:00
Brian Webb
415b86879c Added the RFM22B driver to the Revo to support an RFM22B radio on the external SPI port. 2012-08-25 11:45:43 -07:00
Brian Webb
fad32dcc29 Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs. 2012-08-25 11:41:32 -07:00
James Cotton
ce5ef7edf3 Update the serial ports and receiver and servo ports 2012-08-25 13:19:23 -05:00
James Cotton
b9050809cc Add a board info file for revo mini. However it was to remap the define MAINADAPTER for the HMC5883 driver which needs rewriting not to need this. 2012-08-25 12:57:50 -05:00
James Cotton
05e2e24bcb Reconfigure the SPI ports. 2012-08-25 12:38:44 -05:00
James Cotton
60160001c6 Copy the revo project to revo mini 2012-08-25 12:23:54 -05:00
a*morale
c696cccff8 Added an option to be able to change the interleave between Pressure and Temperature conversion for the MS5611 
To enable this option define the PIOS_MS5611_SLOW_TEMP_RATE with the number of Pressure conversion for each Temperature conversion.
 2012-08-25 13:04:41 +02:00
a*morale
257b00a400 Fixed a typo on I2C speed for the MS5611 2012-08-25 12:28:25 +02:00
a*morale
789746151a Fixes the selection of the oversample settings from the pios_ms5611_cfg.oversapling configuration 2012-08-25 11:29:01 +02:00
James Cotton
59d1367d37 Autotuning: Make the output also follow the hysteresis output 2012-08-24 22:45:45 -05:00
Brian Webb
34b433e074 Added UAVTalkSendBuf function and added locking in UAVTalkSendAck and UAVTalkSendNack. 2012-08-24 19:42:10 -07:00
Brian Webb
b1c88628f6 Merge branch 'james/revo' of ssh://git.openpilot.org/revo into brian/revo_link 2012-08-24 19:35:40 -07:00
James Cotton
a3f1894cd7 Autotuning: Make the estimator require the value to toggle above and below the hysteresis level. 2012-08-24 21:33:08 -05:00
James Cotton
8babe5d8a4 Autotuning: Increase the measurement time to 30 seconds. 2012-08-24 21:32:11 -05:00
Brian Webb
7ce0004c47 Added include of stdint.h to aes.c 2012-08-24 19:26:06 -07:00
Brian Webb
88c8cba0ff Reduced size of temporaries to the correct size in rs.c 2012-08-22 06:46:51 -07:00
Brian Webb
2cd0733f7d Removed unecessary include of stm32f10x.h from aes.h 2012-08-22 06:45:44 -07:00
a*morale
d8ea84cdf1 Fix output power selection from the configured value at startup 2012-08-21 18:51:45 +02:00
Stacey Sheldon
2d0e4944d3 Merge remote-tracking branch 'origin/stac/actuator-task-cpu-optimization' into next 2012-08-20 19:13:39 -04:00
James Cotton
113a759cd9 Merge branch 'next' into revo 2012-08-19 21:22:02 -05:00
Brian Webb
171f91336c Removed assert that was no longer needef form PipX pios_board.c 2012-08-18 08:40:19 -07:00
James Cotton
c4b82fa1fd Disable transmitter updating PH location while using a tablet. 2012-08-12 17:51:52 -05:00
James Cotton
44dc01126e Merge branch 'next' into revo 2012-08-12 16:12:54 -05:00
James Cotton
3d1a6cbcba Attitude: Make sure the EKF can init if HomeLocation is not set but the 
magnetic field is.  Good for switching between indoor and outdoor mode.
 2012-08-12 16:11:04 -05:00
James Cotton
880eb5eb11 Fix revo for the removal of SDCard supprot 2012-08-12 14:45:06 -05:00
James Cotton
18d63f7e9c Merge commit 'b19a0947fb72dc069540561ffeb6983ee318fcb9' into revo 2012-08-12 14:39:30 -05:00
James Cotton
75db0fcb35 Merge branch 'next' into revo 
Conflicts:
	flight/Modules/GPS/GPS.c
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/systemalarms.xml
 2012-08-12 14:38:38 -05:00