Brian Webb
9b9d0c0d1e
RFM22B: Added back configuration of the RF Power and RF Datarate. Also added setting of the destination ID in the rfm22b driver.
2012-10-03 20:03:35 -07:00
Brian Webb
3cdb9df05f
RFM22B: Removed setting register 0x58 in the rfm22_setDatarate call, which was breaking all data rates < 100000 bps. Also temporatily fixed the datarate at 64kbps.
2012-10-02 20:59:43 -07:00
Brian Webb
a8590045a8
RFM22B: Moved radio status reporting from the radio module into the rfm22b driver task.
2012-10-02 19:52:21 -07:00
James Cotton
0c8c148b51
PipX HW Def: Use PIOS_BOARD_HW_DEFS_GetRfm22Cfg since the radio module initializes the modem
...
and doesn't know teh difference between RM2 and PipX
2012-10-02 10:07:50 -05:00
James Cotton
879dfed288
RM2/RM1: Make the firmware and bootloader support the pin mappings between these two targets
...
for USB and radio
A side-effect of this is the pipxsettings are no longer populated into the rfm22b cfg structure
as that was made constant to be consistent with other drivers.
2012-10-02 09:31:15 -05:00
a*morale
c2910d0ce0
Receiver input working for both PPM/PWM mode for rm2
2012-09-30 20:54:10 +02:00
a*morale
227aa98ebc
Added TIM12 to PIOS_TIM
2012-09-30 20:32:03 +02:00
a*morale
be752b8075
Fixed some declaration to Exti functions to make it compile.
2012-09-30 17:04:36 +02:00
a*morale
504d691487
Fixed declaration of PIOS_L3GD20_IRQHandler.
2012-09-30 15:44:31 +02:00
James Cotton
61f1140645
Merge branch 'revo' into rm2
2012-09-28 01:01:35 -05:00
James Cotton
5c13c31c08
Merge branch 'next' into revo
...
Conflicts:
ground/openpilotgcs/src/libs/utils/homelocationutil.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.h
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/uavobjectutil/uavobjectutilmanager.cpp
2012-09-28 01:00:10 -05:00
James Cotton
8979c00fba
Merge branch 'exti_end_switching_isr' into next
2012-09-28 00:41:08 -05:00
James Cotton
519e3e2e3a
PIOS_EXTI: Make the line task macro now take in the xHigherTaskPriority variable name
2012-09-28 00:40:36 -05:00
James Cotton
f12d5c04fb
Merge remote-tracking branch 'origin/lilvinz/mpu6000_masked_locals_fix' into next
2012-09-27 14:43:54 -05:00
James Cotton
1ba40ee9b0
PIOS_EXTI: Make sure to use pdTRUE instead of true where appropriate.
2012-09-27 14:41:38 -05:00
James Cotton
1721479a12
Fix for vinz' merge to pios_mpu6000 exti changes
2012-09-27 14:34:11 -05:00
James Cotton
a021659b75
Merge remote-tracking branch 'origin/lilvinz/exti_end_switching_isr' into next
2012-09-27 14:31:16 -05:00
James Cotton
303fe17969
Merge remote-tracking branch 'revo/brian/rfm22_refactor' into revo
2012-09-27 14:04:48 -05:00
James Cotton
6e114360f4
Merge branch 'next' into revo
...
Conflicts:
shared/uavobjectdefinition/taskinfo.xml
2012-09-27 14:04:44 -05:00
James Cotton
d2842169ee
Sensors: Need to support MPU6000 for revision 3
2012-09-26 04:04:48 -05:00
James Cotton
93c44f2a4e
RM2 Temporary patch: Swap the GPIO pins and the VSense pins. This needs to be based on the hardware revision later.
2012-09-26 03:02:25 -05:00
James Cotton
333a96516c
Merge remote-tracking branch 'revo/brian/rfm22_refactor' into rm2
2012-09-26 01:40:23 -05:00
James Cotton
dadc38d82d
Revo Mini 2: Get basic LED working. Board revision is actually 3 since right now it masquerades as Revo.
2012-09-26 01:17:32 -05:00
James Cotton
0fa4b062a4
Merge branch 'next' into revo
2012-09-26 00:43:02 -05:00
Brian Webb
6972c29813
RFM22B: Added check for timeout wating for sync on receive. This virtually eliminates the number of timeouts.
2012-09-25 18:10:15 -07:00
Brian Webb
88be2ddf1e
RFM22B: Added a message timeout event to the RFM22B state machine that will fire if a packet takes too long to transmit / receive.
2012-09-24 20:51:34 -07:00
Stacey Sheldon
215ff56fe8
usbcdc: fix handling of CDC SET_LINE_CODING request
...
The SET_LINE_CODING request contains data and must be
handled as such.
Previously, the only requests that had data were IN
requests. SET_LINE_CODING is an OUT request so it
required additional changes to support a new type of
data request.
2012-09-24 00:56:25 -04:00
Stacey Sheldon
5e37448814
usb: correct enum for CDC SET_CONTROL_LINE_STATE request
2012-09-24 00:53:52 -04:00
Stacey Sheldon
c056ac5261
usbcdc: don't assert on calls when CDC is not initialized
...
The CDC interface is always advertised in the FW USB
descriptors. It is NOT always enabled/initialized at
runtime. Specifically, it can be Disabled in HwSettings.
Previously, any CDC-related query that the host would send
resulted in an assert and a watchdog.
Now, a suitable return code indicating that the request is
unsupported is returned in this scenario.
2012-09-24 00:53:12 -04:00
Brian Webb
a070e1cc3e
RFM22B: Added PIOS_RFM22B_Receive_Packet function and removed rx buffer.
2012-09-23 08:36:38 -07:00
Brian Webb
a46e3cdec3
RFM22B: All outgoing data to the radio is now going through the PIOS_RFM22B_Send_Packet call. Also removed all global variables with the exception of the rx buffer.
2012-09-22 20:13:11 -07:00
Brian Webb
61200f01f5
RFM22B: Major refactoring of te RFM22B driver to implement a state machine for the driver. The state machine should now be complete, and the driver seems to be working pretty well on both the RM and the pipx.
2012-09-22 20:13:10 -07:00
Brian Webb
80509d264e
RFM22B: Start at cleaning up the processing interrupt handling, and starting to make it more of a state machine. Also removed the supervisor, which was causing unnecessary resets. The supervisor functionality is not in the the driver thread.
2012-09-22 20:13:08 -07:00
Brian Webb
057227726b
Radio: Make sure pios_packet_handler is set to 0 when radio module is not initialized.
2012-09-22 20:13:07 -07:00
Brian Webb
8ca2e85f4c
RFM22B: Removed incorrect defaulting of tx power level.
2012-09-22 20:13:05 -07:00
Brian Webb
6623c55846
RFM22B: Moved ISR processing thread into the rfm22b driver.
2012-09-22 20:13:03 -07:00
Brian Webb
432a6dfd00
RM: Fixed crashing when radio module is disabled.
2012-09-22 20:13:02 -07:00
James Cotton
497683e571
Fix OSX simulator
2012-09-18 13:29:11 -05:00
Stacey Sheldon
14123069be
gdb: add gdb config file for CC BU image
2012-09-16 21:13:42 -04:00
Stacey Sheldon
368d57bc92
Merge remote-tracking branch 'origin/lilvinz/OP-300' into next
2012-09-16 16:05:25 -04:00
lilvinz
a6a7ed8157
pios_exti: added returnvalues to exti handlers which allows to use portEND_SWITCHING_ISR
2012-09-16 21:44:09 +02:00
Stacey Sheldon
05483e2a74
simposix: adapt simposix to addition of relay tuning
2012-09-16 15:40:47 -04:00
lilvinz
524cff1c40
pios_mpu6000: fixed masked locals mistake
2012-09-16 21:25:06 +02:00
lilvinz
718062ed6e
pios_led: added support for active_high connected leds
2012-09-16 18:19:27 +02:00
James Cotton
13e7733e5f
Merge branch 'revo-mini' into revo
2012-09-12 02:30:10 -05:00
James Cotton
223a3473c2
Merge branch 'next' into revo-mini
2012-09-12 02:03:39 -05:00
James Cotton
595083c982
PID: Fix small bug in setpoint weighting that had really ugly consequences
2012-09-12 00:07:17 -05:00
James Cotton
4717c376c0
Stabilization: For the inner loop call the setpoint shaping version so that
...
the derivative term can weight the sticks and gyros independently.
2012-09-11 13:21:53 -05:00
James Cotton
e4a167dca1
PID: Add a pid_apply_setpoint which takes in the setpoint and feedback term
...
This version allows performing setpoint weighting, currently on the derivative
component.
2012-09-11 13:21:19 -05:00
James Cotton
11b099b1ef
Stabilization: Add configuration terms for the derivative calculation to the UAVO and pass
...
them in to the PID system.
2012-09-11 12:29:38 -05:00
