Alessio Morale
9350bd65d9
OP-1535 - change sensor rate to 1KHz with software downsample to 500Hz
...
Allow per board SPI prescaler settings
2014-10-10 22:33:49 +02:00
Stefan Karlsson
aaebc25eff
OP-1528 Fix Telemetry-only over the Flexi-IO port
2014-10-08 00:31:31 +02:00
Stefan Karlsson
004f5a32a9
OP-1528 Enable Telemetry on the Flexi-IO (receiver) port on the Revo
2014-10-06 21:28:09 +02:00
Alessio Morale
e553014596
Merge branch 'amorale/OP-1476_1477_1275_GPSV9_pios_firmware_bootloader' into next
2014-10-03 00:37:55 +02:00
Alessio Morale
9cfd55d006
Merge branch 'amorale/OP-1507_gps_module_cpu_optimization' into next
2014-10-03 00:37:39 +02:00
Alessio Morale
9e0596c2c5
Merge remote-tracking branch 'origin/amorale/OP-1379_ext_led_notification_module_new' into next
...
Conflicts:
Makefile
flight/targets/boards/discoveryf4bare/firmware/Makefile
flight/targets/boards/revolution/firmware/Makefile
2014-09-29 21:26:31 +02:00
Alessio Morale
d0b37bab28
OP-1507 - Handles GPS data a chunk at time instead of a single byte at time.
2014-09-27 00:17:00 +02:00
Alessio Morale
7a9a0868c9
OP-1275 - split persistence handling out of UavobjectManager. stubs are used if target deos not support persistency
2014-09-20 21:02:51 +02:00
Alessio Morale
531d80a69c
OP-1476 - Fix other targets for OP_DFU changes
2014-09-16 22:40:54 +02:00
Alessio Morale
76b9b1c40f
OP-1406 - Create a support library to share common calibration and sample publishing logic
2014-09-13 16:14:34 +02:00
Alessio Morale
e64ab1f1ff
OP-1370 - Configure bidirectional COM port for GPS
2014-08-22 02:41:36 +02:00
Alessio Morale
55557ecd60
OP-1434 - Add gps extended status
2014-08-21 19:34:35 +02:00
Alessio Morale
e511190ad3
OP-1406 - Improve handling of external magnetometer, add additional settings
2014-08-21 19:34:35 +02:00
Alessio Morale
cced294760
OP-1406 - Add support for aux mag calibration settings.
...
todo:
- GCS handling for extenal mag calibration
2014-08-21 19:34:35 +02:00
Alessio Morale
52ad63be33
OP-1406 - Add support for Aux magnetometer on flight controllers
2014-08-21 19:34:35 +02:00
Corvus Corax
8daa5dfa12
Merge branch 'next' into corvuscorax/OP-1156_pathfollower-unification
2014-08-16 13:58:40 +02:00
Alessio Morale
376aa0052f
OP-1379 - Initial Notify module. Supports:
...
1) predefined seqences associated with each flightmode. 2) fixed table with alarm index and assciated led warn/error sequences/repetition rate.
2014-08-13 15:18:17 +02:00
Alessio Morale
f556a5e335
OP-1379 - Split simple notification and external lednotifications libraries
2014-08-13 15:14:55 +02:00
Alessio Morale
1067ea59d1
OP-1379 - Split pios_ws2811.h in config and public api header
2014-08-12 22:19:30 +02:00
Corvus Corax
ca1923f76f
OP-1156: Added new (stub template) pathFollower Module as well as builkd environment changes to compile it instead of old pathfollowers
2014-08-10 12:50:38 +02:00
Alessio Morale
d856bbdb50
OP-1403 - Update targets
2014-08-02 20:48:48 +02:00
Alessio Morale
57a43a5587
OP-1403 - Migrate to new HMC5x83 driver and remove old HMC5883 one
2014-08-02 20:48:34 +02:00
Alessio Morale
c6a773363f
Merge branch 'amorale/OP-943_add_malloc_for_ccsram' into next
...
Conflicts:
flight/pios/common/pios_adxl345.c
make/apps-defs.mk
2014-06-22 19:31:03 +02:00
Alessio Morale
263fd64ab5
Merge branch 'amorale/OP-1274_freertos_v8.0.0' into next
2014-06-22 16:06:21 +02:00
Alessio Morale
eb5deb3eca
OP-1274 Remove unneeded cast from task name in xTaskCreate call
2014-06-18 01:47:43 +02:00
Alessio Morale
6226aec2a7
OP-943 uses pios_mem API for heap allocation
2014-06-11 22:15:40 +02:00
Alessio Morale
eb35803b5b
OP-1365 Flight code instrumentation API: Add support for Revolution
2014-06-07 17:44:27 +02:00
Alessio Morale
92bf876654
OP-1350 refactor into a plans library all functions dealing with initialization and execution of PathFollower/pathplanner commands for manualcontrol
2014-05-19 18:35:18 +02:00
Alessio Morale
36e304f579
OP-1274 fixes for revolution
2014-05-18 22:56:48 +02:00
Alessio Morale
86b0829823
OP-1350 Add takeofflocation UAVO
2014-05-16 00:40:19 +02:00
Alessio Morale
58bba31c72
Merge remote-tracking branch 'origin/amorale/OP-1312_pios_ws2811_driver' into next
2014-05-15 20:30:43 +02:00
Alessio Morale
3c5a41049b
Merge branch 'amorale/OP-1302_updated_led_behaviour' into next
2014-05-11 12:01:53 +02:00
Alessio Morale
711c5ea79d
OP-1312 Fixes the flicker issue in Revo. Raised the Transfer complete irq priotity to prevent delays stopping the timer.
2014-05-11 10:43:24 +02:00
Alessio Morale
e5d6726bb6
Merge remote-tracking branch 'origin/next' into amorale/OP-1302_updated_led_behaviour
2014-05-08 22:27:08 +02:00
Corvus Corax
153d2fb786
OP-1309 Fixed bug in Quaternion Stabilization Error Calculation in regards to independent axis
2014-05-07 22:12:01 +02:00
m_thread
a0e661b77e
Disabled malfunctioning PIOS_QUATERNION_STABILIZATION option.
2014-05-07 14:19:20 +02:00
Alessio Morale
19caa57dc6
OP-1312 fix copy/paste-naming issue
2014-05-03 11:45:30 +02:00
Corvus Corax
6993570cc9
OP-1309 integrated AltitudeHold into new Stabilization
2014-05-01 11:48:38 +02:00
Alessio Morale
3897106f4d
OP-1312 remove boilerplate from config using macros.
...
Use four locations for ch1+update dma source to exploit fifo and memory read bursts
2014-05-01 10:33:44 +02:00
Corvus Corax
82d2c5a308
OP-1309 Implemented control of new stabilization framework (replaces old stabilization module)
2014-04-29 00:29:15 +02:00
Alessio Morale
4cece04166
OP-1312 fix documentation, get rid of stale comments from previous implementations
2014-04-27 19:12:36 +02:00
Corvus Corax
93f82652b7
OP-1309 outer loop fully implemented - some cleanups and changes in control flow to accomodate new logic
2014-04-27 15:15:59 +02:00
Alessio Morale
99f19dd809
OP-1312 Make WS2811 driver configurable.
...
Now output pin may be chosen among all servo outputs and Flexi-io pins 3 and 4 (they are not used for PWM input/output)
2014-04-26 19:48:44 +02:00
Alessio Morale
a0b857337f
OP-1312 Add support for Revolution (right now always active on pin3). Configurability not yet added
2014-04-26 18:40:59 +02:00
Corvus Corax
e9d1a2af4b
OP-1309 get rid of this horrible bound() function code duplication throughout entire flight code and put it into libraries/math
2014-04-26 17:48:54 +02:00
Corvus Corax
599661ba18
OP-1309 UAVObject changes, GCS changes and Makefile changes needed for Stabi refactoring
2014-04-26 15:14:40 +02:00
Alessio Morale
5d637fab87
OP-1302 move stuffs away from systemmod
2014-04-13 11:54:25 +02:00
Philippe Renon
3b7b06aad0
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2014-04-09 09:11:54 +02:00
Philippe Renon
c8397ee0b8
Merge remote-tracking branch 'origin/filnet/OP-1033_fw_usb_cleanups' into next
2014-04-09 09:08:09 +02:00
Corvus Corax
bb91039f51
OP-1290 fixes in telemetry (and pios_board initialization)
2014-04-05 12:53:31 +02:00
Alessio Morale
6540c69698
Merge remote-tracking branch 'origin/andrecillo/OP-1273_PixHawk_airspeed_sensor_MS4525DO' into next
2014-04-01 22:05:12 +02:00
Andres
c5dc556a43
OP-1273 Uncrustify
2014-03-27 16:19:22 +01:00
Andrés Chavarría Krauser
f8f53d8801
OP-1273 Adaptations to include MS4525DO PixHawk speed sensor
2014-03-25 09:18:25 +01:00
Alessio Morale
abd7da20df
Merge branch 'amorale/OP-1026_cpu_idle' into next
2014-03-23 15:32:19 +01:00
Alessio Morale
519d74ad1b
OP-1026 fix review issues
2014-03-09 16:08:27 +01:00
Alessio Morale
e407eb8126
Merge branch 'next' of git://git.openpilot.org/OpenPilot into next
2014-03-09 14:38:17 +01:00
Alessio Morale
0b30b79c98
Merge remote-tracking branch 'origin/amorale/OP-1149_gyro_accel_thermal_calibration' into next
...
Conflicts:
ground/openpilotgcs/src/libs/eigen/Eigen/src/Core/util/Memory.h
ground/openpilotgcs/src/plugins/config/revosensors.ui
ground/openpilotgcs/src/plugins/setupwizard/vehicleconfigurationhelper.cpp
2014-03-09 14:38:08 +01:00
Philippe Renon
ef137a27b3
OP-1033 Added note where appropriate that changing USB buffer length will require changes to the USB buffer setup
2014-03-03 22:01:13 +01:00
Alessio Morale
3fc3b5b01b
OP-1026 replace idle time calculation with task monitor API
2014-02-22 00:30:03 +01:00
Corvus Corax
0ebc92d9f5
Merge branch 'corvuscorax/OP-942_task-diagnostics-for-callbacks' into corvuscorax/OP-1216_flight-control-refurbishment
...
Conflicts:
flight/modules/AltitudeHold/altitudehold.c
2014-02-16 19:08:39 +01:00
Corvus Corax
1898d0ad35
OP-1217 create new receiver module
...
This module includes all the receiver IO and parsing/failsafe
functionality of ManualControl, but does none of the interpretations in
regards to flight mode / actuator control or arming that was included in
the old ManualControl
In a second step the old ManualControl module needs to be adapted to do
only these ommitted things in a modular way - as a delayed callback
2014-02-16 15:09:08 +01:00
Corvus Corax
b5a27d05e7
OP-1197 configurable failsafes OP-1219 thrust control OP-1217 separate manualcontrolsettings apart
2014-02-09 19:37:22 +01:00
Corvus Corax
49a1c4c28f
OP-942 refactored callback scheduler to fit into PiOS naming scheme
2014-02-02 22:08:16 +01:00
Corvus Corax
5b9a17f630
OP-942 moved DelayedCallbackScheduler into pios/common
2014-02-02 20:31:37 +01:00
Corvus Corax
b076ba02a1
OP-942 API change to CallbackScheduler - include unique ID for each callback for a taskinfo like UAVObject
2014-02-02 19:54:17 +01:00
Alessio Morale
02c7084196
Merge remote-tracking branch 'origin/next' into amorale/OP-1149_gyro_accel_thermal_calibration
...
Conflicts:
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2014-01-23 01:02:13 +01:00
Corvus Corax
41202a0227
Merge branch 'corvuscorax/OP-1022_AH_improvements_amorale' into next
2014-01-15 22:47:42 +01:00
Philippe Renon
694747cd27
Merge remote-tracking branch 'origin/next' into filnet/OP-1122_gcs_waypoint_editor_stabilization
...
Conflicts:
ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
2014-01-15 20:12:08 +01:00
Corvus Corax
9997f14d68
Merge remote-tracking branch 'origin/next' into corvuscorax/OP-1022_AH_improvements_amorale
2014-01-15 18:45:09 +01:00
Philippe Renon
7f2c24db2b
OP-1122 OP-1158 - renamed uavobject FlightPlan to PathPlan
...
+review OPReview-609
2014-01-14 21:05:16 +01:00
Philippe Renon
aa24f2193a
OP-1122 OP-1158 renamed FlightPlanInfo uavobject to FlightPlan
2014-01-12 15:23:21 +01:00
Philippe Renon
8c7792b6e5
OP-1122 OP-1120 Added a new FligthPlanInfo uavobject
...
- FligthPlanInfo contains the number of waypoints and action pathes
- FligthPlanInfo contains a CRC of all waypoints and action pathes
- The CRC is not yet implemented
- These informations will be used to check the consistency of a flight plan
2014-01-09 01:06:00 +01:00
Alessio Morale
7ac2f9f87f
OP-1149 Move accel/gyro calibration setting to a separate object, to be reused also for CC3D
2013-12-26 16:55:57 +01:00
Les Newell
b7cfc503ea
OP-984 Updated makefiles and inc files for multiple pid bank objects
2013-12-11 17:09:00 +00:00
Les Newell
e4bcd87ddd
OP-984 Added stabilizationbank to inc files
2013-12-11 17:08:35 +00:00
Corvus Corax
4ad0e730da
added status uavobject for easier debugging
2013-12-08 12:23:16 +01:00
Corvus Corax
a4d53c18ac
got rid of altholdsmoothed uavobject
2013-12-07 20:14:02 +01:00
Corvus Corax
3e1b0fd114
Merge branch 'next' into corvuscorax/OP-1022_AH_improvements_amorale
2013-12-07 16:33:57 +01:00
Corvus Corax
d235a24e23
Merge branch 'next' into corvuscorax/onboardlogging
2013-11-19 18:49:58 +01:00
Corvus Corax
7a6c0b61e8
Merge branch 'next' into corvuscorax/callbackeventdispatcher2
2013-11-19 18:36:20 +01:00
Corvus Corax
9414f3513f
adapted telemetry stack sizes for flight firmware to include more space needed for logging feature
2013-11-17 22:39:39 +01:00
Corvus Corax
c6031ed963
fixed usr flash system definition
2013-11-17 21:03:08 +01:00
Corvus Corax
c7431623af
changed hardware definition for revolution to have usr space in just one arena
...
(no flash garbage collection since used primarily for logging where there are no deletes)
2013-11-17 20:43:53 +01:00
Corvus Corax
fcc479f5cb
more intelligent log interfacing, including flash formatting option
2013-11-17 20:14:50 +01:00
Corvus Corax
3d8625abaf
Enabled logging on revolution (added module and uavobjects)
2013-11-17 18:50:51 +01:00
Alessio Morale
b003109eea
OP-1104: Update BL to version 6, raise to 0xA0000 so 640Kbyte program size.
...
+review OPReview
#resolve
2013-11-05 19:07:36 +01:00
Corvus Corax
9537cac701
Merge branch 'next' into corvuscorax/callbackeventdispatcher2
2013-07-28 17:10:20 +02:00
Brian Webb
e246ecf536
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
2013-07-28 07:01:08 -07:00
Corvus Corax
be583dd8bf
fixes to gps airspeed sensor
2013-07-19 15:30:33 +02:00
Werner Backes
7708aab313
Added vertical velocity as a control loop input to improve dynamics during
...
commanded ascend/decent.
Conflicts:
flight/modules/AltitudeHold/altitudehold.c
flight/modules/ManualControl/manualcontrol.c
shared/uavobjectdefinition/altitudeholdsettings.xml
2013-07-16 21:17:32 +00:00
Alessio Morale
11bc7804d0
Merge branch 'amorale/OP-994_adc_cleanup' into next
2013-07-16 12:23:25 +00:00
Corvus Corax
27eadc200b
Merge branch 'corvuscorax/lla2nedfilter' into next
...
Conflicts:
flight/modules/StateEstimation/stateestimation.c
2013-07-10 14:38:12 +02:00
Corvus Corax
551780c74b
Merge branch 'corvuscorax/complementary_altitude_filter' into next
...
Conflicts:
flight/targets/boards/revolution/firmware/UAVObjects.inc
2013-07-10 14:27:25 +02:00
Brian Webb
c2df59498b
Merge remote-tracking branch 'origin/master' into next
2013-07-06 07:08:30 -07:00
Alessio Morale
89cb294218
OP-994 Move pios_architecture,h include in pios,h
...
+review OPReview-506
2013-07-02 19:26:39 +02:00
Corvus Corax
51a4b16af5
New Filter to calculate NED from LLA as part of StateEstimation
2013-06-30 18:49:29 +02:00
Corvus Corax
2a16c0dbd7
removed GPS module ability to calculate NED coordinate (not its job)
2013-06-30 16:31:19 +02:00
Brian Webb
491e5fe685
Adds a failsafe on PPM output on OPLink that kicks in when the link goes down. Also updates all air datarate settings and adds new 64 and 100 kbps modes.
2013-06-29 15:00:38 -07:00
Corvus Corax
7745f93935
changed default coefficients and exposed them to a settings uavobject as they should be
2013-06-29 01:16:02 +02:00
Brian Webb
bab69401b9
OP-932 Allows configuring the Revo as coordinator.
2013-06-27 19:55:01 -07:00
Corvus Corax
cd2cc821d6
made event dispatcher a callback
2013-06-27 18:51:35 +02:00
Brian Webb
2aea2342ab
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
2013-06-26 18:01:54 -07:00
Brian Webb
774a74884a
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
2013-06-26 17:57:11 -07:00
Brian Webb
8c370df319
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
2013-06-26 17:56:56 -07:00
Brian Webb
08efc8d152
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
2013-06-26 17:56:20 -07:00
Corvus Corax
0c43346292
Merge branch 'corvuscorax/OP-947_stateestimator-module' into next
...
Thanks everyone for helping getting this together, especially Alessio
and DLite :-)
2013-06-25 23:48:12 +02:00
Alessio Morale
0b8d18ae49
OP-994 Move common defines to architecture specific header
...
+review OPReview-506
2013-06-24 18:50:44 +02:00
Oleg Semyonov
7f84307714
OP-997: fix release notes. This change was reverted but not documented
2013-06-22 18:29:40 +02:00
Alessio Morale
840e6aa4f7
OP-994 Move temp calculation to a macro defined in pios_board.h as it is achitecture dependant
...
+review OPReview-506
2013-06-15 18:47:33 +02:00
Corvus Corax
1d17d08cca
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
2013-06-12 18:32:01 +02:00
Alessio Morale
2c0f7794a9
Merge remote-tracking branch 'origin/amorale/OP-997_revolution_settings_to_ext_flash' into next
2013-06-11 15:39:13 +02:00
Brian Webb
789930db45
Moved PIOS_TASK_MONITOR_Initialize to before EventDispatcherInitialize. The event dispatcher creates a task that registers itself with the task monitor. It is unlikely that the task will start before the task monitor is initialized, but not impossible (at least on the F4 targets, I don't think).
2013-06-09 20:16:40 -07:00
Alessio Morale
1cb69e6a0e
OP-997: Revert Revolution settings storage to external flash to prevent freezes during sector erase/garbage collection
2013-06-09 19:17:12 +02:00
Alessio Morale
bdd80a63c9
OP-994: Refactor/Cleanup of cpu temp measurement: fixed declarations for Voltage Scale constants
2013-06-08 13:46:57 +02:00
Alessio Morale
ab1c9c157f
OP-995: Fixes for correct battery monitor readout
2013-06-08 13:40:01 +02:00
Alessio Morale
6671a404ca
OP-994 Refactor/Cleanup of cpu temp measurement
2013-06-08 13:36:18 +02:00
Corvus Corax
6fdf554d4a
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
...
Conflicts:
flight/modules/Attitude/revolution/attitude.c
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
shared/uavobjectdefinition/attitudesettings.xml
2013-06-06 19:25:54 +02:00
Corvus Corax
9b95af2006
refaktored GPS Sensor UAVObjects
2013-05-22 22:36:23 +02:00
Corvus Corax
b56de3b66b
filterchain rework
2013-05-22 21:26:18 +02:00
Brian Webb
ac4847c8ac
OP-932 Moves the configuration of the com ports on the coordinator OPLink to startup.
2013-05-21 19:48:21 -07:00
Corvus Corax
ecc4a529a3
some fixes to filtercf and stateestimation and filterekf - Thanks Werner for help :-)
2013-05-21 20:06:33 +02:00
Corvus Corax
3cb4f59c94
failsafe, fallback to attitude for now until StateEstimation works reliably
2013-05-20 20:49:34 +02:00
Corvus Corax
8a36959d39
OP-945: Filter refaktoring - last fixes to make it compile
2013-05-20 17:04:52 +02:00
Corvus Corax
1236bf3ed9
renamed Magneto to Mag
2013-05-20 10:33:02 +02:00
Corvus Corax
49b8e0d699
Merge branch 'next' into corvuscorax/OP-946_refaktor_sensor_and_state
2013-05-20 10:07:55 +02:00
Corvus Corax
d97934cf86
Merge branch 'next' into corvuscorax/OP-946_refaktor_sensor_and_state
2013-05-19 22:05:48 +02:00
Brian Webb
649667d338
Addes ifdef PIOS_INCLUDE_WDG around several calls to the wathdog functions for the Revolution firmware (allows you to turn off the watchdog).
2013-05-19 12:56:23 -07:00
Sexy Pony
900f643bbd
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
Alessio Morale
ab7af16be3
Merge branch 'amorale/OP-901_lib_udates-usb_fixes' into HEAD
...
Conflicts:
flight/pios/stm32f10x/library.mk
flight/targets/boards/revoproto/firmware/pios_board.c
2013-05-19 15:01:08 +02:00
Corvus Corax
f630351c75
Merge branch 'next' ...
2013-05-19 12:17:40 +02:00
Corvus Corax
daf329d8f5
uncrustification (again)
2013-05-19 11:38:18 +02:00
Alessio Morale
88a39a81d8
Enable ComUsbBridge Optional Module and fix CDC support for RevoProto
2013-05-19 10:07:01 +02:00
Corvus Corax
5284195c29
Refaktored sensor and state UAVObjects consistently into XXYSensor and XXYState
2013-05-18 19:36:45 +02:00
Alessio Morale
c1f767b12d
Merge remote-tracking branch 'origin/amorale/OP-954_logfs_settings_in_internal_flash' into next
...
Conflicts:
flight/pios/common/pios_flashfs_logfs.c
2013-05-18 15:53:25 +02:00
Alessio Morale
66da2796e0
Merge remote-tracking branch 'origin/amorale/OP-905_revolution_watchdog_next' into next
2013-05-18 15:00:50 +02:00
Corvus Corax
80caceb984
make uncrustify_all;make uncrustify_all;
2013-05-18 14:17:26 +02:00
Alessio Morale
67e41c34fc
Merge remote-tracking branch 'origin/next' into amorale/usb_fixes
2013-05-17 22:46:42 +02:00
Richard Flay (Hyper)
a6aedee9fa
Merge branch 'next' into brian/support_inverted_USB_vsense
2013-05-17 05:54:42 +09:30
Alessio Morale
6ba15ebc53
OP-954 Fixes from review:
...
- CopterControl target fix
- tabs in Nakefiles
- Removed duplicate stale settings and clean empty lines in osd Makefile
+review OPReview-470
2013-05-15 23:18:50 +02:00
Alessio Morale
c80f01dff9
OP-954 Rename the legacy PIOS_INCLUDE_FLASH_SECTOR_SETTINGS to PIOS_INCLUDE_FLASH_LOGFS_SETTINGS
...
+review OPReview-470
2013-05-15 23:16:34 +02:00
Brian Webb
156109bb88
Added support for an active low USB vsense line.
2013-05-14 20:37:13 -07:00
Alessio Morale
742ea6f6b8
Merge branch 'amorale/OP-905_revolution_watchdog' into next
...
Conflicts:
flight/targets/RevoMini/System/pios_board.c
2013-05-14 18:42:02 +02:00
Richard Flay (Hyper)
ed68fbe68d
OP-951: Adds -Wshadow to flight CFLAGS and fixes resulting compilation breakage.
...
+review OPReview
2013-05-14 07:01:45 +09:30
Alessio Morale
535b53cb1c
Raised priority for USB interrupt to high, changed subriority to 0 (PriorityGroup is 0)
2013-05-11 22:41:05 +02:00
Stacey Sheldon
441e9e7b84
f4 usb: always init HID and CDC devices
...
This is required so that we can always respond to HID and
CDC requests via the control endpoint (ep0). The F1/F3
implementation gets away with disabling these interfaces
because all of the ep0 handling is in the usbhook code
rather than (properly) split out into class-specific
drivers like it is done on the F4 implementation.
Conflicts:
flight/targets/DiscoveryF4/System/pios_board.c
flight/targets/FlyingF4/System/pios_board.c
flight/targets/Freedom/System/pios_board.c
flight/targets/Quanton/System/pios_board.c
2013-05-11 22:41:04 +02:00
Stacey Sheldon
565de5fd4e
f4 usb: ensure correct interface numbers for BL and FW
...
The interface numbers differ for the HID interface between
the BL and FW. This is required to keep windows happy.
In HID+CDC, the CDC interfaces must come first with HID last
which makes it #2 . In HID only mode, we can't use #2 for HID
since windows doesn't like the first/only interface to be
anything other than #0 .
Conflicts:
flight/targets/board_hw_defs/discoveryf4/board_hw_defs.c
flight/targets/board_hw_defs/flyingf4/board_hw_defs.c
flight/targets/board_hw_defs/freedom/board_hw_defs.c
flight/targets/board_hw_defs/quanton/board_hw_defs.c
2013-05-11 22:41:02 +02:00
Stacey Sheldon
9cc70695d7
f4 usb cdc: add support for USB CDC to RevoMini
...
Conflicts:
flight/targets/RevoMini/System/inc/pios_config.h
flight/targets/RevoMini/System/pios_board.c
2013-05-11 22:40:56 +02:00
Stacey Sheldon
207bd671ac
usb: fix interfaces in USB HW defs for RevoMini
2013-05-11 22:38:27 +02:00
Alessio Morale
d555bd0673
Uses Internal flash for system settings storage repourposing external flash for "User" storage
2013-05-11 22:06:30 +02:00
Alessio Morale
687e75b2e2
Changes to board specific files to support UAVObject on a specific LogFS instance
2013-05-11 17:15:07 +02:00
Richard Flay (Hyper)
cf14608ebe
Merge branch 'next' into hyper/OP-936_task-monitor-rework
2013-05-09 19:25:02 +09:30
Alessio Morale
93bad2e8c2
Merge branch 'amorale/OP-917_f4_bootloader_updater' into next
...
***** PLEASE NOTE ***** From this revision all F4 based boards (Revolution/OSD) needs bootloader version 5 to boot properly
Conflicts:
flight/pios/stm32f4xx/libraries/CMSIS2/Device/ST/STM32F4xx/Source/osd/system_stm32f4xx.c
flight/targets/boards/osd/board-info.mk
make/boot-defs.mk
make/common-defs.mk
2013-05-07 21:02:41 +02:00
Richard Flay (Hyper)
fbc8bc698f
OP-936: Merges branch 'next' into hyper/OP-936_task-monitor-rework, fixes damage/conflicts,
...
and brings the callback scheduler into the fold.
+review OPReview-461
2013-05-06 19:11:14 +09:30
Brian Webb
ae8286e99a
OP-932: Fixes a bug that was preventing setting of Tx power on remote modem.
2013-05-06 01:03:15 +01:00
Corvus Corax
39fe6beb4b
Merge branch 'corvuscorax/Attitude-fixes' into next
...
Conflicts:
flight/libraries/insgps13state.c
flight/modules/Attitude/revolution/attitude.c
2013-05-05 23:09:07 +02:00
Corvus Corax
946105cbe3
Merge branch 'next' into corvuscorax/Attitude-fixes
2013-05-05 17:44:59 +02:00
Alessio Morale
5a2c53804f
OP-917 Make reboot over telemetry link works. UserDFU timeouts to the user application when no USB connection is found.
...
+review OPReview-456
2013-05-05 15:15:44 +02:00
Richard Flay (Hyper)
a2d8544931
OP-931: adds -Wextra compiler option for the flight code, and makes the bazillion code changes required
...
to make the flight code compile again. Needs careful review, particularly all the fixes for the
signed vs unsigned comparisons.
+review OPReview-459
2013-05-05 16:32:24 +09:30
Brian Webb
84a0f981e0
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into OP-932-Modularize_Radio_Driver
2013-05-03 14:08:40 +01:00
Corvus Corax
25c58ff074
Put all EKF initialisation values in a separate UAVObject EKFConfiguration,
...
adapted insgps13state.c/.h,
modules/Attitude/revolution,
configrevowidget.cpp,
accordingly.
2013-05-03 02:17:44 +02:00
Richard Flay (Hyper)
84e1a81f8b
OP-936: Moves the task monitor code out of the flight library and into PiOS.
...
This move and rework also breaks the dependency of the task monitor on the UAVO subsystem,
and pushes the responsibility for updating the TaskInfo UAVO into the System module.
+review OPReview
2013-05-03 07:01:14 +09:30
Sambas
f7b9223827
Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext
...
Conflicts:
flight/modules/System/systemmod.c
shared/uavobjectdefinition/taskinfo.xml
2013-05-02 09:00:12 +03:00
Corvus Corax
e7dc665c14
Reworked Variance Objects, Setting for initial EKF variance
2013-05-01 19:16:29 +02:00
Corvus Corax
d77c690fe3
Merge branch 'next' into corvuscorax/Attitude-fixes
...
Conflicts:
flight/modules/Attitude/revolution/attitude.c
2013-05-01 17:51:05 +02:00
Brian Webb
3b5bec167e
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into OP-932-Modularize_Radio_Driver
2013-05-01 15:30:24 +01:00
Brian Webb
344e5cbb66
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into OP-932-Modularize_Radio_Driver
2013-05-01 14:38:28 +01:00
Corvus Corax
a0ca66b0cd
Merge branch 'corvuscorax/delayed_callbacks_with_delay' into next
2013-05-01 15:34:16 +02:00
Brian Webb
c3ea1bf3c0
OP-932: Fixed GPIO debugging on RevoMini (both V1 and V2)
2013-05-01 03:13:36 +01:00
Alessio Morale
e1fdc41d7f
OP-917 add Bootloader support for IRQStack to reside in CCSRAM
...
+review OPReview-456
2013-05-01 01:03:27 +02:00
Alessio Morale
1eef6a7f06
OP-917 Extended the program flash size to 3 128k sectors for F4 targets
...
+review OPReview-456
2013-05-01 01:00:48 +02:00
Corvus Corax
6e2c9b3c46
New EKFStateVariance UAVObject with EKF state variance information
2013-04-28 19:38:37 +02:00
Corvus Corax
e1233c7780
Merge branch 'next' into corvuscorax/delayed_callbacks_with_delay
...
Conflicts:
flight/targets/Revolution/System/inc/openpilot.h
flight/targets/SimPosix/System/inc/openpilot.h
flight/targets/boards/coptercontrol/firmware/inc/openpilot.h
flight/targets/boards/oplinkmini/firmware/inc/openpilot.h
flight/targets/boards/revolution/firmware/inc/openpilot.h
flight/targets/boards/revoproto/firmware/inc/openpilot.h
2013-04-27 13:26:03 +02:00
Oleg Semyonov
45f456580f
Fix pios debug pin functions and defines (thanks to Mathieu for the patch)
2013-04-26 18:18:31 +03:00
Oleg Semyonov
e2fd821e97
Merge remote-tracking branch 'origin/next' into sambas/diffnext
...
Conflicts:
make/common-defs.mk
2013-04-26 16:31:19 +03:00
sambas
e94c00e671
Fix revo BL compile error
2013-04-25 19:51:52 +03:00
sambas
abe3742217
Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext
...
Conflicts:
flight/Libraries/CoordinateConversions.c
flight/Libraries/paths.c
flight/Modules/System/systemmod.c
flight/PiOS/STM32F4xx/pios_sys.c
flight/targets/boards/coptercontrol/pios_board.h
flight/targets/boards/revolution/pios_board.h
flight/targets/boards/revoproto/pios_board.h
2013-04-25 17:26:49 +03:00
Oleg Semyonov
66db978244
Rename Libraries->libraries, Modules->modules
2013-04-25 13:13:36 +03:00
Oleg Semyonov
8f784ac6cb
flight: remove unnecessary #include "systemmod.h" from boards
2013-04-24 22:35:34 +03:00
Oleg Semyonov
406339eb49
Merge branch 'amorale/next_precheck' into os/OP-899_board-config-rework-rebased-3
...
Conflicts:
flight/Libraries/inc/op_dfu.h
flight/Libraries/op_dfu.c
flight/targets/Bootloaders/CopterControl/inc/op_dfu.h
flight/targets/Bootloaders/OSD/op_dfu.c
flight/targets/boards/coptercontrol/bootloader/inc/op_dfu.h
flight/targets/boards/coptercontrol/bootloader/op_dfu.c
flight/targets/boards/oplinkmini/bootloader/inc/op_dfu.h
flight/targets/boards/oplinkmini/bootloader/op_dfu.c
flight/targets/boards/osd/bootloader/inc/op_dfu.h
flight/targets/boards/osd/bootloader/op_dfu.c
flight/targets/boards/revolution/bootloader/inc/op_dfu.h
flight/targets/boards/revolution/bootloader/op_dfu.c
flight/targets/boards/sensortest/bootloader/inc/op_dfu.h
flight/targets/boards/sensortest/bootloader/op_dfu.c
make/boot-defs.mk
2013-04-24 00:37:39 +03:00
Oleg Semyonov
3f2431c04f
OP-899: move board-specific pios_board.h files into board directories
2013-04-24 00:07:06 +03:00
Oleg Semyonov
f7332f6905
OP-899: remove extra copy of pios_usb_data.c and move it level up
2013-04-24 00:07:06 +03:00
Oleg Semyonov
1dd20eca33
OP-899: move board_hw_defs.c under board directories and fix some includes
2013-04-24 00:07:06 +03:00
Oleg Semyonov
393b37fa7a
OP-899: move board-info.mk from make/boards to board directories
2013-04-24 00:07:06 +03:00
Oleg Semyonov
f7f842687a
OP-899: rename System to firmware and move Makefile into it
2013-04-24 00:07:06 +03:00
Oleg Semyonov
fce12662bc
OP-899: move bootloaders under board directories
2013-04-24 00:07:06 +03:00
Oleg Semyonov
f01655efed
OP-899: get rid of board_friendly names
2013-04-24 00:07:06 +03:00