James Cotton
56233e262b
Remove unnecessary decimals for roll/pitch/yaw rates.
2012-03-22 11:35:29 -05:00
James Cotton
8059004755
Make sure if an event has a null handle and the queue is full we don't try and
...
query UAVObjID
2012-03-22 10:46:30 -05:00
James Cotton
c7ff2a46c7
Merge remote-tracking branch 'origin/laurent/modelview' into revolution
...
Conflicts:
flight/CopterControl/Makefile
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
2012-03-22 02:58:24 -05:00
James Cotton
6cb3abec80
Allow firmware compiled for 0x902 to be downloaded to 0x901
2012-03-22 00:42:23 -05:00
James Cotton
1eaf6f66fb
Rename one of the boxes in the runnindevicewidget.ui to avoid warnings.
2012-03-22 00:42:22 -05:00
James Cotton
2f8049e20a
Update the bootloader hw version for the mpu6000 board and make the sensor code
...
and initialization respond appropriately. Enable hte L3GD20 and BMA180.
Let the board type determine which is used.
2012-03-22 00:41:37 -05:00
James Cotton
6350ec575e
Merge remote-tracking branch 'origin/os/features/stick-deadband-next' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
2012-03-21 16:03:40 -05:00
James Cotton
e7ca02c038
Initialize mag before mpu6000. Seems more reliable but I don't know why.
2012-03-21 03:42:15 -05:00
James Cotton
e4290d678b
Reenable the pressure sensor and other modules
2012-03-21 00:49:29 -05:00
James Cotton
720684c248
Flag to enable pressure/mag
2012-03-21 00:49:04 -05:00
James Cotton
a77a859e5c
Using some config switches to get this board up and running
2012-03-21 00:48:31 -05:00
James Cotton
6b88a278b3
Disable overosync by default. It was triggering event system warnings due to
...
the extra updates from altholdsmoothed. Increase queue size when reenabled.
Also AltHold is is trigger warnings because other tasks starve it during
startup.
2012-03-21 00:29:09 -05:00
James Cotton
f4663b98e4
When the event system or object manager has an error store the object ID in the
...
SystemStats.
2012-03-20 23:18:07 -05:00
zedamota
4e6114d095
Merge remote-tracking branch 'remotes/origin/laurent/modelview' into next
2012-03-20 23:20:20 +00:00
zedamota
58b001c1d7
Merge remote-tracking branch 'remotes/origin/banig/look-n-feel' into next
2012-03-20 23:19:31 +00:00
a*morale
92f4dd4f1a
fixed indentation
2012-03-20 00:56:42 +01:00
Laurent Ribon
299f9fd5d3
Comment the line "VERSION = 2.2.0"
2012-03-20 00:10:31 +01:00
a*morale
702114763f
Added Mixer9/Mixer10 to mixerstatus.xml
2012-03-19 23:49:47 +01:00
Laurent Ribon
b36be73ffb
Add the possibility to set VBO usage when running.(No restart required)
...
Change Zoomm sensibility (made it more sensitive)
Remobe unecessary state variable :
- load Error
- init failed (An OpenGL init failed cause a Crash)
2012-03-19 20:41:28 +01:00
Laurent Ribon
081769fb7b
Make method setVboEnable not inline.
...
There is more stuf to do.
2012-03-19 20:38:21 +01:00
Brian Webb
aba3789d87
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into Brian-Metadata-Mods
2012-03-18 13:28:11 -07:00
James Cotton
a319a6b14c
Flags to disable mag/baro init
2012-03-14 22:35:09 -05:00
Laurent Ribon
75d1f74090
Modify the modelview gadget widget in order to make it work with the
...
latest vesrion of GLC_lib and Qt4.8
2012-03-14 20:03:39 +01:00
Laurent Ribon
8e3dc0a4d8
Update ignoring file list (Eclipse project specific files)
2012-03-14 19:59:08 +01:00
Laurent Ribon
a636abef43
Activate Modelview plugin with QT4.8
2012-03-14 19:57:50 +01:00
Laurent Ribon
5eeafa227c
Replace GLC_lib OpenPilot version to the latest GLC_lib version.
2012-03-14 19:57:11 +01:00
James Cotton
0d42303d37
Fix some compilation errors/warnings in attitude.c
2012-03-11 16:30:18 -05:00
James Cotton
c8d1534b87
Convert inline functions to static, let the compiler figure it out. Also some
...
formatting since code was probably written with tabstop = 2 :)
2012-03-11 13:18:08 -05:00
James Cotton
bbbca319d8
Merge commit 'c4df0c0ceff8ba985bb20d815f27910b9e59d992' into revolution
2012-03-11 13:14:06 -05:00
Alessio Morale
c4df0c0cef
Support for port remapping on serial ports
...
Support for receiver configuration (PPM, PWM and DSM)
There are still problems with Flexi port (not sure if related to a problem with my board) and Uart/SBUS that has the input always inverted.
2012-03-11 18:38:49 +01:00
banigreyling
761924e855
Made the config look-and-feel more consistent according to the stabilization panel
2012-03-11 18:56:43 +02:00
banigreyling
02b0da9b33
Made the config look-and-feel more consistent according to the stabilization panel
2012-03-11 17:21:12 +02:00
Stacey Sheldon
3782cdc58e
bu: drop CC and PipX from BU targets since they don't build
...
The CC and PipX bootloader updater (BU) builds don't currently
work due to some recent changes in how LEDs are handled.
Remove them from the default BU targets so that the all_flight
target can build clean again.
Also fix a linker warning in OP build.
2012-03-10 20:41:15 -05:00
James Cotton
df90074d84
Merge branch 'stac/servo-pin-order-fix' of ssh://git.openpilot.org/revo into revolution
2012-03-10 14:39:03 -06:00
Stacey Sheldon
6038bfcb40
revo servo: swap servo pins 3 and 4 definitions to match schematic
...
Note non-standard pin numbering on JP3 on the schematic.
2012-03-10 15:06:21 -05:00
Stacey Sheldon
5060ad311b
gcs: remove reference to obsolete ui_ahrs.h file
2012-03-10 14:52:32 -05:00
banigreyling
909083c124
Input panel changes
2012-03-10 20:50:14 +02:00
James Cotton
820ca6a970
Initialize loop variable OUTSIDE loop so that baro is used still for altitude
...
hold.
2012-03-10 11:28:51 -06:00
James Cotton
f4705551b6
Update task info to cover the AltitudeHold module
2012-03-10 11:14:30 -06:00
James Cotton
690f1b5f29
Enable camera stabilization
2012-03-08 01:37:34 -06:00
Stacey Sheldon
3210bd3f9c
f4 usb_dcd: disable FIFO empty IRQ while waiting for tx completion
...
CPU was being hammered with FIFO empty IRQs if we queued data but
the host wasn't actively draining the FIFO.
This was entirely unexpected so this hack should probably be
removed once we can figure out why this was happening.
This is almost certainly hiding some other issue.
2012-03-07 20:36:37 -05:00
Stacey Sheldon
c4bd286739
f4 usb_hid: track whether we have buffers queued on endpoints
...
Make sure we don't clobber our endpoint configuration by
double configuring an Rx or Tx buffer against it. Wait for
the completion of the previous operation before allowing
endpoint configuration again.
2012-03-07 20:36:36 -05:00
Stacey Sheldon
65fc6104e6
f4 usb_hid: ignore upper layers if USB IF not yet enabled
...
Upper (COM) layer was calling down into the HID layer before
the HID interface had been enabled. This was leading to
interacting with the endpoint Rx and Tx FIFOs prior to init.
The FIFO config was then being clobbered when we the USB IF
was eventually enabled.
2012-03-07 20:01:35 -05:00
Stacey Sheldon
1f37806eab
f4 usb_hid: fix typo in EP IN registration call
...
Code was using the size of the Rx buffer instead of the Tx
buffer when registering. Buffers are currently the same
size so wasn't causing any issues.
2012-03-07 20:01:35 -05:00
Stacey Sheldon
bc3ee6209c
f4 usbhook: drop in/out bit from EP numbers before using as index
...
USBHOOK endpoint callback arrays should not be indexed with the
0x80 (in/out) bit set. Oops.
2012-03-07 20:01:35 -05:00
Stacey Sheldon
6832a62872
f4 bl_helper: clear all flash errors as we unlock the flash
...
Error flags being set were causing flash erase operations to
fail. Not sure why these flags were set though so this might
be hiding some other problem.
2012-03-07 19:53:18 -05:00
Stacey Sheldon
4ea1156e7b
f4 bl_helper: teach bl_helper about f4 flash sector map
2012-03-07 19:53:17 -05:00
Stacey Sheldon
d1d123e4f6
revo bl: turn on USB and add support for OP DFU protocol
2012-03-07 19:53:17 -05:00
Stacey Sheldon
b8fcbad297
revo bl: remove unneeded code from revo BL
...
Clean up BL source tree and makefile.
2012-03-07 19:53:17 -05:00
Stacey Sheldon
c854c3f4a4
usbhook: add support in API for deactivating USB
2012-03-07 19:53:17 -05:00
