rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-03 11:24:10 +01:00
Code Issues Releases Activity
4,008 Commits 5 Branches 8 Tags 266 MiB
199db1362d
Commit Graph

1793 Commits

Author SHA1 Message Date
corvus
8a49dbb6ab OpenPilot_posix: Added ENABLE_QUATERNION_STABILIZATION define 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3116 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-01 15:14:33 +00:00
corvus
da76192e47 Modules/Guidance: Bugfix in Position-Hold code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3112 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-31 20:08:14 +00:00
peabody124
a57c289b3a CC-24: Support mounting CC at any angle by applying a rotation. Now need to 
rotate sensors to make sure stabilization behaves well so don't use till then.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3100 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-29 02:15:57 +00:00
peabody124
48c20d37a9 OP-349 CC-32: Added a Completed operation that is returned after successful 
save or load

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3093 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-28 19:16:50 +00:00
peabody124
bd5925d526 CC-35: Separate term for CC yaw bias rate and others 
Note: AttitudeSettings changed so you'll need to re-zero it

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3090 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-28 18:42:48 +00:00
peabody124
4120937391 OP-364 OP-191: Convert the OPMap setting of HomeLocation to mGau to match the 
changes in flight code

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3083 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-28 10:40:26 +00:00
peabody124
3fc88f69e2 Covering a case that should not occur 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3081 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-26 21:02:43 +00:00
edouard
bce3d21a0f Fix FirmwareIAP module, as it failed to reset the board if the object was queried before for other purposes. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3080 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-26 12:00:08 +00:00
peabody124
e262e3c220 Convert outer position controller to PI 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3077 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-26 11:40:33 +00:00
fredericg
662a3e5cc8 OP-361 Also parse ZDA message in order to get GPS time info with new GTOP FW 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3074 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-26 11:13:11 +00:00
peabody124
eafcf35fa6 Reenable position hold 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3072 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-25 20:17:31 +00:00
edouard
f19b0efc6f CC-40 Implemented support for FirmwareIAP on Coptercontrol: you can now use the "Halt" command on the uploader gadget. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3070 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-25 13:50:13 +00:00
chebuzz
2e5863281c CC/Stabilization - Fix attitude bias not being applied over all sampled quantities 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3065 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-24 17:12:04 +00:00
fredericg
b37dd770d2 Use attitudeActualData.Yaw for course 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3064 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-24 10:56:20 +00:00
peabody124
487b039229 Earlier patch broke coding conventions for line endings 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3062 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-22 12:47:15 +00:00
peabody124
cfb2ca4e1b OP-192 Fix ahrs mag problems from TWOSTEP mag units 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3061 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-22 12:46:50 +00:00
chebuzz
183ca03cc9 CC/Makefile - Make I2C conditional compilation, disabled by default. Unterminated I2C can cause boot process to hang. Thus disabling I2C by default should help to avoid problems in the future. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3059 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-21 09:18:21 +00:00
jonathan
5d23666839 OP-191: Merge from full-calibration branch. Add orthogonality calibration to the accelerometer, and use it. Also adjust the treatment of accelerometer scale factors, such that the diagonal elements of the calibration scale factor matrix are positive. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3057 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-21 00:51:45 +00:00
jonathan
160695e546 OP-191: Merge from full-calibration branch. Add the local gravitational field strength to the home location. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3055 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-21 00:48:32 +00:00
jonathan
8aef515456 OP-191: Merge from full-calibration branch. Scale the reference magnetic field vector to units of milliguass. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3054 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-21 00:47:02 +00:00
fredericg
d270f7e987 Changes to FlightBatterySettings as discussed in forums 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3047 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-19 18:45:40 +00:00
fredericg
ef1dcf6939 rename batterysettings.xml => flightbatterysettings.xml 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3046 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-19 18:31:58 +00:00
sambas
193f9720e5 unix style output dir for all, makes eclipse users happier 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3042 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-15 19:11:56 +00:00
FredericG
ea512a3da7 OP-322 Implement Audible alarm via PWM - Different tune for GPS and Battery Alarm 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3035 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-13 17:02:19 +00:00
peabody124
0c2c70bb60 Update OSX project 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3030 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-12 09:08:23 +00:00
peabody124
b76a235940 OP-317: Fixed the FirmwareIAP resetting the AHRS board. Sorry this took me so 
long to do.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3029 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-12 09:08:12 +00:00
FredericG
c3732bad93 OP-322 Implement Audible alarm via PWM - handle new "PWM Alarm Buzzer" channel type 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3028 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-12 09:02:02 +00:00
FredericG
5bdf836027 OP-324 No code change; commented debug-code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3026 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-12 08:55:45 +00:00
pip
4fab429f50 Corrected the #ifdef line (line 26/27), it was "#ifndef STM32103CB_AHRS_H_", it's now "#ifndef STM32103CB_CC_H_" 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3022 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-10 20:22:20 +00:00
edouard
3fec8a6d72 OP-339 Update PipXtreme PID too. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3020 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 18:07:58 +00:00
pip
f4fef1bfb8 Rewrote PipX's PPM input decoder to do away with supervisor timer/monitor. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3019 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 17:36:11 +00:00
FredericG
fc18f1cb36 OP-326 Long I2C messages starve the other drivers 
We where hammered on the head with interrupts that the driver does not need, not allowing the ISRs of other drivers to run 

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3018 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 17:12:18 +00:00
FredericG
4c51e80b5b OP-340 I2C NACK causes next transfers to fail. 
Needed to clear the NACK flag in the ISR, or the next transfers seem to get a nack too because the IRQ comes back

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3017 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 16:58:37 +00:00
FredericG
f6a2584f12 No code change; commented debug-code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3016 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 16:52:09 +00:00
edouard
aa097ec400 OP-339 Update USB descriptors on CopterControl and OpenPilot to reflect the new convention. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3015 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 07:21:01 +00:00
edouard
7631aeeb48 OP-338 USB Bootloaders on OpenPilot & CopterControl boards now use the new PID, and the right values for bcdDevice. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3014 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 07:06:53 +00:00
edouard
ae32bae5c7 OP-338: Use the new convention on bcdDevice for the PipXtreme. Also use the new PID for the modem. Careful, this breaks the uploader gadget on the GCS for now! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3011 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 23:57:18 +00:00
sambas
b240915d05 PPM driver cleanup 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3010 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 18:52:50 +00:00
pip
0d389c4d34 Forgot to comment out serial port debugging option .. sorry - again 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3009 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 18:32:16 +00:00
pip
48cecfaacd Forgot to commit this file - sorry 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3008 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 18:29:48 +00:00
sambas
0eeacb44bd PPM driver for OP, first test 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3007 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 18:08:13 +00:00
cwabbott
f657dba49f Modified sitl win32 to output to /build/sitl_win32 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3006 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 02:36:33 +00:00
corvus
be1837ecd5 SiTL/SimPosix: Fixed compilation issue because of Timer macro eedeclaration in portmacro.h 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3005 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-07 22:43:20 +00:00
peabody124
b2abc73ae3 AHRS: Move getting mag data back into the main loop 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2998 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-07 19:28:25 +00:00
peabody124
aea0695f70 AHRS: Move out of bound checks to main loop instead of when getting the accel 
data

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2997 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-07 19:28:11 +00:00
pip
bfcfb3e88e Fixed problem with board rebooting when changing mode from PPM Rx or PPM Tx to some other mode. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2996 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-07 17:46:39 +00:00
pip
3e67bf19dc PPM generator module now working (the modem can generate a nice precise PPM stream) - not yet done the RF streaming side of PPM though. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2995 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-07 15:00:38 +00:00
pip
b71bc49ce3 Updated USB descriptor to use the BCD values stated on the wiki page http://wiki.openpilot.org/display/Doc/Firmware+USB+descriptors 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2993 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-06 21:08:12 +00:00
pip
88b2d360a3 Various minor changes to do with switch modem mode on the fly but mainly PPM Input decoder (with error/noise detection) is now working 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2992 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-06 18:52:18 +00:00
FredericG
baf0850690 OP-336 CPU usage calculation incorrect when armed - no measure the time between calculations 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2987 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-06 11:50:54 +00:00
FredericG
5554973cea OP-174 ET OSD support - fix for writing configurations - temp workaround for what seems to be an issue with I2C driver OP-305 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2986 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-06 11:19:29 +00:00
corvus
7c4f29508b useless note on documentation (needs update) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2982 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-06 00:29:50 +00:00
FredericG
6d0679b9e9 Small fix to PIOS_DEBUG_PinValue8Bit(), was also influencing other IO pins 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2975 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-05 12:53:52 +00:00
FredericG
35475820ad 2 new PIOS_DEBUG functions to output a value on the debug-pins. In its current implementation it will probably not work on CC.... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2971 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-05 09:23:57 +00:00
FredericG
5f52ef6aaa fix: PIOS_DEBUG_Init() was no longer called 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2970 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-05 09:21:32 +00:00
osnwt
8d085552fb CC: Modules/Attitude/attitude.c: unused headers removed (do we have another?) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2967 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-04 21:12:37 +00:00
osnwt
e9d507dd3e CC: Fixed compilation error after uavobject rename 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2966 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-04 20:56:58 +00:00
pip
7317891d39 Slight reorganisation to allow easier continuous data transmission (DATA streaming and PPM streaming) and allow easier total configuration changes on the fly. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2961 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-04 08:34:44 +00:00
FredericG
32c7596636 OP-324 Make NMEA parser more resilient to corrupted messages - For the new GTOP GPS FW, parsing of the VTG message is needed to get Heading and GroundSpeed 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2960 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-04 07:57:18 +00:00
FredericG
c890f596e4 NMEA: minor change to debug-messages 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2953 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 19:53:10 +00:00
pip
eaea8f28cf Starting to add continuous streaming modes (DATA and PPM). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2951 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 16:32:43 +00:00
scott
f1ee47dcff Added #include "pios_config.h" to make sim_posix build again. Some alarm constants were missing. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2945 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 05:09:11 +00:00
peabody124
e4d9ef98a5 OP-315: Display run time as a percentage 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2944 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:45 +00:00
peabody124
97163d2193 Update OSX project 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2943 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:42 +00:00
peabody124
ec29920a8d OP-315: Clean up RTC calls into a separate function. Unfortunately still need 
to add function headers into portmacro.h

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2942 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:38 +00:00
peabody124
3e2c542eef OP-315 Use RTC at 65 khz as time base for task switching 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2941 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:34 +00:00
peabody124
528f74b512 OP-315: Extend TaskInfo to include run time stats. Still need to configure a 
timer to run at around 10 khz.  RTC a good option.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2940 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:29 +00:00
peabody124
267efe0b88 OP-315: Patch to FreeRTOS port to allow querying the run time for tasks. This 
will need to be forward ported (and ideally pushed up stream) for FreeRTOS
updates

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2939 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:22 +00:00
vassilis
b084ea7ea1 FlightPlan/Python: Updated object generator to create a Python file for each UAVObject. It is now possible to access all UAVObjects from the FlightPlan Python scripts. 
Warning: The memory utilization when importing objects is unacceptably high making it unusable in the flight code at this point. It can be however used with the SITL simulator. Some more investigation is needed to understand why several kb of memory are used each time a module is imported (even before any functions are called or objects from the module are created). 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2938 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 02:22:50 +00:00
peabody124
3b13ad6859 OP-329: Enumerate more possible flight modes now like multiple stabilization 
modes so that the FlightMode field is complete in terms of being informative
enough

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2935 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-02 01:25:44 +00:00
peabody124
915ae1ae3c OP-313 Account for which axis are in rate and none to get the desired 
quaternion

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2933 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-02 01:25:38 +00:00
peabody124
8930ec01de OP-313 Quaternion based stabilization, gets rid of lots of checking angle 
signs, should be stable for all orientations

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2932 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-02 01:25:34 +00:00
peabody124
3488d28a5b Whitespace fixes 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2931 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-02 01:25:30 +00:00
peabody124
3e17c2ff55 OP-312: Create a StabilizationDesired object that is the generic input to 
Stabilization, carries the desired rate or attitude as well as a flag on how to
intepret it.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2930 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-02 01:25:27 +00:00
peabody124
672b9ce961 Convert failure to mount SD card to an error so you can't arm with an 
unconfigured quad

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2929 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-02 01:25:23 +00:00
pip
beedb7fdad Added center stick deadband code - currently deadband is set to '0' so not used) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2927 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-01 21:43:20 +00:00
osnwt
0210334aa8 OP-305 Preparing the top level Makefile for unix-style Windows build. 
- fixed: dep directory problem (sometimes it cannot be created by make, so do it with mkdir);
- fixed: added -f option to all_clean target (or rm stops on Windows for hidden .svn and r/o files);
- fixed: overridden USE_BOOTLOADER var for bootloaders (should always be set to NO regardless of command line);
- verified: short compilation output works as expected.

Some TODOs still exist, see OP-305 comments for details.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2918 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-28 10:25:56 +00:00
FredericG
7d679e01f0 ET-174 Adapted ET OSD Drv to current GPS coordinate format 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2910 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-27 19:58:34 +00:00
sambas
d9ad0e9a8f OP-22 Flight/PiOS: Spektrum hacks, doubled supervisor timer and ?loss? counter to the channel8 value 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2907 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-27 19:03:58 +00:00
FredericG
0124c42b8c OP-324 Make NMEA parser more resilient to corrupted messages - WANRING: NMEA parser refactored - VTG and ZDA messages no longer interpreted 
Sometimes corrupted NMEA messages can get passed the NMEA "CRC" check and this caused the NEMA parser to crash because it assumed that the correct amount of parameters are present.
Now the NMEA message is split into its different parameters before it is passed to the message-specific parser. Hence the function-signature of the parser functions has changed and the implementations of these functions has changed. 
I also decided to no longer interpret the VTG and ZDA because they do not contain more data than the other messages that are being parsed.
Not tested in flight, and could not test the TOP message.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2904 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-27 13:45:19 +00:00
pip
7bfb58ce73 clean up 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2903 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-27 13:13:10 +00:00
peabody124
ea390d0b90 CC-26: Add accel bias term. Note it's units are LSB, not m/s^s 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2895 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-26 22:21:44 +00:00
osnwt
899c1fe0bf Moved CPU and heap alarm thresholds into pios_config.h. 
Fixed heap thresholds for the CC (prevented arming).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2886 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-26 11:46:39 +00:00
pip
a2e1e3e7d0 Updated some RF module register settings 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2876 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-25 11:28:39 +00:00
pip
62e510a696 Set unused/unconnected pins as outputs. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2875 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-24 17:31:24 +00:00
pip
4b4d9043fb Set PDOP and VDOP to 99.99 in binary mode (theose values are not available in binary mode). A couple of cleanups too. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2874 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-24 10:55:45 +00:00
andrew
84c26f8905 OP-84 
Battery module for Power Sensor version 2
made a few variable declarations static so things work again after changes to make this module not run in it's own thread.

Fixed the energy consumed calcs to scale correctly.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2870 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-24 05:05:17 +00:00
loris
463403ee82 OP-316 - UAVObject units Fix accelerations units 
Fix default calibration values

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2869 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-24 02:52:19 +00:00
pip
bee704176b Fixed a bug when scanning for start of packet. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2861 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 10:11:26 +00:00
pip
d3ea16de99 Updated spectrum scanning code. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2859 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 09:30:06 +00:00
pip
e9d7ab09be Improved efficiency (a lot) when scanning for and locking onto the start of a GPS binary packet. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2858 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 09:24:17 +00:00
stac
76fed0387b makefile: refactor bootloader makefiles 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2856 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 04:19:00 +00:00
stac
ee3d890bfc makefile: convert to unix line-endings 
These files were a mix of line endings.  Now
they're all consistent as LF terminators.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2855 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 04:18:56 +00:00
stac
6700a74782 makefile: refactor makefiles and clean up output 
This significantly reduces the amount of duplication
across the various firmware makefiles.

The new firmware-defs.mk file should contain only
macros/declarations that will apply to all firmware
makefiles.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2854 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 04:18:53 +00:00
stac
251f227b31 makefile: reduce default verbosity level 
Add V=1 to your invocation of make to re-enable
printing of all command lines.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2851 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 04:18:46 +00:00
stac
9035ba3f6b makefile: clean up summary lines 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2849 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 04:18:41 +00:00
stac
fbe22e1d81 makefile: cleanup 
- Removed commented out code
- Removed "begin" "finished" and "end" targets

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2848 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 04:18:39 +00:00
pip
e7850ab25e Corrected scale for lat/lon - was out by a factor of 10 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2846 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 14:16:16 +00:00
pip
f6370a035d 'Slightly' more efficient binary packet handling. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2845 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 12:45:51 +00:00
pip
9da0fb47e2 Reduced GPS command resend to 2 second time-out, a few more white space corrections. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2844 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 12:32:08 +00:00
pip
3881c652c1 Simplified the binary code a little, added a 300ms delay after sending a FULL COLD RESTART to the GPS (IF we do that is), fixed some spelling mistakes. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2843 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 12:15:25 +00:00
pip
9d14723dcc Commenting tidy upping 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2842 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 11:32:24 +00:00
pip
d1d165adff More white space/tab corrections. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2841 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 11:19:12 +00:00
pip
0fd6170979 added another "#ifdef ENABLE_GPS_NMEA" 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2840 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 11:02:17 +00:00
pip
a2259201e5 removed tabs after spaces. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2839 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 10:55:01 +00:00
pip
414836a4c9 Added another parsing_errors++ line. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2838 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 10:36:27 +00:00
pip
4547013901 Added GTOP BINARY mode to the GPS module. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2837 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-22 10:16:50 +00:00
FredericG
42cf204dcd correctly detect 100% load 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2836 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 21:50:10 +00:00
peabody124
5f2c502172 Arm checks: Simply don't check GPS because the dependence on AHRS Settings 
breaks CC.  This should be done by the GPS alarm being set only when
appropriate (i.e. by AHRS on OP when needed) and not by the GPS module.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2824 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-21 05:58:24 +00:00
pip
0c48fe258a Changed alarm level checking from WARNING level to ERROR level before allowing arming. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2822 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 19:34:27 +00:00
pip
88cf1e276a Ignore Telemetry alarm when arming (telemetry alarm no longer prevents arming). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2821 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 17:53:03 +00:00
pip
df26016c64 Added alarm check when trying to change state to ARMED mode (from DISAMRED mode), if any warnings are set then it will not go into ARMED mode - unless the GPS is not required, in which case the GPS alarm will be ignored (if using Simple or Indoor AHRS modes). These checks are done in the okToArm() function. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2820 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 16:42:31 +00:00
pip
578b779a76 Fixed PPM compile errors - you can now compile for PPM input if desired. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2818 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 13:41:19 +00:00
pip
c214833346 oops!! .. enabled PPM and disable PWM by default .. sorry 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2817 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 13:40:19 +00:00
pip
d733f08a0e Fixed PPM compile option (missing pin defines) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2816 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 13:12:08 +00:00
sambas
8d6f320fca Handle I2C defines better, needed in CC for now 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2815 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 07:14:02 +00:00
osnwt
6613158206 BootloaderUpdater: fixed compilation errors. It works with CC too (tested). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2813 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-19 19:18:03 +00:00
FredericG
c9060393e5 OP-302 Remove threads from modules that do not need them - Battery Module 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2812 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-19 18:56:52 +00:00
FredericG
374e822f79 OP-302 Remove threads from modules that do not need them - ET OSD module 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2811 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-19 13:25:27 +00:00
FredericG
c5f814a931 ET OSD, WIP, measure timing 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2810 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-19 10:18:00 +00:00
pip
9a2bdac49c Reduced CC CPU usage from 57% to 46% by moving the floating point multiplies outside of the accelerometer downsample/averaging loop in the updateSensors() function. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2809 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-19 09:33:03 +00:00
FredericG
ec634ef3e7 debug-pins, small fix 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2808 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-19 09:11:00 +00:00
zedamota
9050608e6c Flight/Bootloader - Bootloader updater, minor update to help user with the CL options 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2805 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-17 15:02:10 +00:00
zedamota
56c195fa9a Flight/Bootloader - Bootloader updater, WORKING - tested with PipX only (should work for all boards though). 
Led(LED1 different color on each board) Sequence:
1-Power On
2-Led ON for 3 seconds (you can disconnect during this time - safety measure) 
3-Led flashes very quickly while the board is being programed (because the program is stored in memory this is very fast and looks like a led glitch)
4-If all good - LED flashes 3 times with a 1sec period and turns off - you may now reboot.
4-If an error ocurred - LED will keep flashing with a 500ms period until power off

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2804 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-17 14:54:57 +00:00
zedamota
949617e236 Flight/Bootloader - Bootloader updater, minor fix 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2801 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-16 15:04:59 +00:00
pip
60e7665aec A bug fixed that caused carrier frequency to go way off when setting the modem to one of the Tx-carrier/Tx-spectrum test modes (and back). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2799 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-16 12:32:44 +00:00
zedamota
993a4a7c5f Flight/Bootloader - Bootloader updater, needs testing 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2798 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-15 17:42:24 +00:00
corvus
435072cf4e Modules/Stabilization, Modules/ManualControl: 
Move channel StabilizationSettings from ManualControlCommand to
AttitudeDesired, unify channel normalization and put them all into ManualControl

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2797 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-15 14:55:00 +00:00
pip
9899c270cb Removed unused code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2796 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-15 13:10:18 +00:00
pip
ac7cfcc358 Added "Ready-To-Send-Time" parameter adjustment 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2795 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-15 12:57:46 +00:00
zedamota
0abec1908d Flight/Bootloadera - small cleaning up. Start of Bootloader Update firmware witch will enable users to update the Bootloader itself without JTAG. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2794 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-14 18:15:25 +00:00
pip
f75539dcc6 Reverted GYRO calibration detection. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2791 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-14 09:01:47 +00:00
stac
3b34cc71b4 bl_pipxtreme: bind to new COM driver 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2789 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-14 01:17:42 +00:00
stac
5ac55a35e3 bl_coptercontrol: bind to new COM driver 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2788 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-14 01:17:39 +00:00
stac
000234f036 bl_ahrs: bind to new COM, USART and SPI drivers 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2787 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-14 01:17:35 +00:00
stac
bbb3882826 bl_openpilot: bind to new COM, USART and SPI drivers 
- Removed all unnecessary device instances and their cfg's.
  - SPI to SD card
  - I2C
  - Aux USART
- Moved SPI baudrate setting into cfg rather than init func.
- Abstracted forcing slave select under OPAHRS API.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2786 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-14 01:17:32 +00:00
pip
74502852c3 Added GYRO calibration detection into the adc_callback() routine - to pass raw values when calibrating the gyro's. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2780 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-13 20:04:25 +00:00
peabody124
52f09e5d55 Add compile time flag (USE_SPEKTRUM) to enable spektrum support until the 
dynamic switching is done.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2778 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-13 17:43:44 +00:00
stac
967bb9bb9c pipx: COM device ids are now 32bit not 8bit 
The COM layer now uses 32bit device ids rather than
8bit.  All code that stores these ids must now use
uint32_t to hold them.

Since these 32bit numbers are really just opaque
pointers, it is (reasonably) safe to assume that
they won't be 0.  The logic around tracking the
*_previous_com_port could probably be cleaned up
to remove that assumption.

Missed this fixup in the recent hwinit changes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2776 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-13 15:54:26 +00:00
sambas
f3bce1705b OP-22 Flight/PiOS: Spektrum fix, OP tested on ground not flown yet, CC not tested. 
pios_rcinput.[ch] outdated

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2775 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-13 13:10:02 +00:00
stac
66a9d53d0a hwinit: Convert I2C driver to dynamic init 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2773 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-12 22:19:54 +00:00
stac
3fda65c5d3 hwinit: Convert SPI drivers to dynamic init 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2772 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-12 22:19:50 +00:00
stac
841b0d3d6d hwinit: Convert COM and USART to dynamic init 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2771 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-12 22:19:43 +00:00
peabody124
ebb8596db0 AHRS: FIx calibration. Move the mag data processing into the loop that acquires accel and gyro 
data.  I don't like this but because of the way the calibration routine works
(sets all gains to 1) this makes the values so far out or range the EKF doesn't
get to run and the mag wasn't previously being updated.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2765 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-09 05:17:32 +00:00
peabody124
93ee2765be Whitespace fix (removing spaces) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2762 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:58 +00:00
peabody124
8498512855 CC-20 Attitude initialization: Make sure no divide by 0 condition possible 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2761 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:55 +00:00
peabody124
9ed0882df9 PiOS/USART: Apply same fix as Spektrum to force read of DR whenever there is an 
error flag set

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2760 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:52 +00:00
peabody124
7e78e8af04 CC-21 PiOS/Spektrum: Prevent condition that can tie up USART interrupt and locks up 
CC.  Must always read the DR to clear the error flags.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2759 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:49 +00:00
peabody124
a3ba9c3781 CC-21 Make it possible to enable Spektrum on CC, although it eats up S6 in 
order to free a timer.  Mode PIOS_DELAY (not working cleanly) to TIM3 because
Spektrum resets TIM2 count.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2758 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:45 +00:00
peabody124
9f71f4121c CC-18 Attitude: Change units to proper engineering ones. An accelKp=1 means 
that it will completely follow the accel attitude each cycle and is way too
high.  Ki=1 means the gyro bias wil be correct by accels each cycle (way too
high).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2755 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:35 +00:00
peabody124
cfe295377c CC-18: Normalize the gravity vector to unity gain 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2754 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:31 +00:00
peabody124
74cc7dbfc9 CC-20 Attitude: Jack up Kp and Ki values for first 5 seconds to force faster 
convergence of gyro bias, then the normal values can be lower.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2753 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:28 +00:00
peabody124
6ac2ddb0c1 CC: Make default build non-debug. This leaves a bit more RAM overhead. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2752 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:24 +00:00
peabody124
682b49df44 CC: Increase the SPI clock rate to minimize time spent in that routine 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2751 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:21 +00:00
peabody124
03fb82ad0a CC Attitude: Change when AttitudeRaw is set to end of attitude estimation, 
because this is what is determines when the Stabilization code executes.
Because we aren't oversampling gyros relative to the PID in CC we should set
the attitude first (computational time to do so is negligible).

Also change update rate to 500 Hz.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2750 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:18 +00:00
pip
d12868f1a3 A few more #define capitalizations. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2748 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-07 12:30:27 +00:00
pip
b2eb141c10 100mW appears to be working again. A few bug fixes. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2745 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-06 21:21:50 +00:00
FredericG
d7fc7646b0 OP-246 UAVOBJ CHANGE - Setting to disable arming/disarming 
options="Always Disarmed,Always Armed,Roll Left,Roll Right,Pitch Forward,Pitch Aft,Yaw Left,Yaw Right" defaultvalue="Always Disarmed"

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2744 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-06 16:16:20 +00:00
pip
6559615ef8 Made quite a few constants/#defines capitals (previously lower case) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2743 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-06 10:55:08 +00:00
sambas
14641cd353 Fix, was outputting "\n" strings into InitMods.c which failed to build 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2742 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-06 07:21:45 +00:00
stac
4e6b539086 debugpins: Add definitions for debug pins 
Not yet used anywhere but will eventually allow
debug pins to be assigned during runtime init based
on configuration found in a new uavobject.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2741 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-06 01:03:06 +00:00
stac
9f595842dd modinit: put initcalls on separate lines 
This makes it easier to step through the module init
sequence in gdb.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2740 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-06 01:03:02 +00:00
corvus
afdaf88d4a UAVObjects: Allow Generation and Initialisation of individual UAVObjects 
per target as defined in Makefile (and/or Make include file) For
OpenPilot this is flight/OpenPilot/UAVObjects.inc For sim_posix and
sim_win32 needs rebuild of uavobjectgenerator and uavobjects!

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2736 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-05 22:17:40 +00:00
pip
9a5d099a79 Started to write the PPM, spectrum scanner and continuous packet stream modules. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2731 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-05 13:45:16 +00:00
peabody124
56d4d54a97 CC: Increase the memory for the modules after removing PriTxTask from CC and 
also increase the telem queue to decrease event errors (can be reverted later if
we need the memory back)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2730 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-05 10:52:59 +00:00
peabody124
f97d853c80 Make the PriTx queue optional which saves 700 bytes 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2729 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-05 10:52:52 +00:00
peabody124
efca295ea0 Modules/Guidance: Fix a bug Corvus caught 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2727 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-05 01:14:55 +00:00
pip
41768be215 Allows modem mode to be set - BUT NOT YET IMPLIMENTED, use NORMAL mode for now. 
Fixed bug in pipx plugin import function - wasn't restoring the AES key.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2726 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-04 23:00:48 +00:00
pip
b50965ba9f Fixed AFC reading 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2719 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-04 10:03:47 +00:00
peabody124
04f54928d6 Modules/Guidance: Fix a bug Dale caught about not grabbing settings and also 
correct a typo when NedAccel.Down wasn't used.  Finally increase stack size of
guidance task.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2718 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-03 20:00:00 +00:00
pip
3bad7982dd Fixed RSSI when no signal received. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2714 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-03 13:12:30 +00:00
pip
ac5155f3d9 Increased RF packet ping speed if the GCS is monitoring the RSSI. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2712 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-03 11:31:34 +00:00
pip
0e3ae58c96 New PipX config protocol packets. YOU NEED TO RECOMPILE THE GCS PLUGIN to use this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2711 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-03 07:05:32 +00:00
peabody124
e5b26bc67d More memory tweaks to keep CC flowing 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2709 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-03 02:42:49 +00:00
peabody124
fedadb1275 CC-8: Move the queue registration into the ADC PIOS driver to allow other 
functions to use it easily

Conflicts:

	flight/Modules/Attitude/attitude.c

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2707 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-03 02:42:43 +00:00
peabody124
810fa70856 UAVObjects: Remove the raw versus filtered fields in the sensor data. Save 
some memory.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2706 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-03 02:42:39 +00:00
peabody124
c95a6447bf CC-8 Whenever the gyro data is updated the callback now pushes the data onto a 
queue, which update sensors waits for.  This confirms one update per gyro
update.  All available accel data will be pulled off each time.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2705 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-03 02:42:33 +00:00
vassilis
90fd4551b6 Flight/SITL: Enable debug of Python scripts 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2704 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-03 02:02:34 +00:00
corvus
f2ef99a2d9 SiTL_win32: Adapted for autogenerated UAVObject Makefile - needs testing 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2703 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-02 20:15:33 +00:00
corvus
16eef53f02 UAVObjectgenerator: Autogenerate Make include-file for flight UAVObjects to be used in firmware Makefiles. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2702 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-02 20:15:28 +00:00
corvus
8de340b5a8 UAVObjectgenerator: Autogenerate Make include-file for flight UAVObjects to be used in firmware Makefiles. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2701 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-02 20:15:16 +00:00
pip
7f8b0d5788 Fixed carrier frequency problems. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2700 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-02 17:53:46 +00:00
pip
40e9a592c8 PipX modem can now be configured from GCS in realtime. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2695 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-02 11:44:23 +00:00
peabody124
986e124202 CC-7 Reverse order of two lines so that yaw bias converges instead of diverges 
:-)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2693 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-02 09:16:28 +00:00
peabody124
265737427b CC-7: Make the gyro scale adjustable (for now at least, this was largely for 
debugging, let's compare values).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2692 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-02 08:57:42 +00:00
peabody124
1663a838ff CC-7 Full complimentary filter ala Mahoney paper using quaternion 
representation.  Also improved gyro bias initialization.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2691 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-02 08:57:38 +00:00
peabody124
cf2e9fb349 Memory: Also allow overriding Stabilization stack size 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2690 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-02 08:57:34 +00:00
pip
2c3e540637 Code added to allow GCS to configure modem. Not yet finished - modem needs rebooting after uploading new config - for the time being. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2687 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 23:40:40 +00:00
peabody124
77ce0d6391 Actuator: Fix bug I made a while ago that stops servos going negative values 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2677 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 21:05:00 +00:00
peabody124
877bcca880 Delete hardcoded min and max servo PWM times, they weren't used. Use the 
configuration settings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2676 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 21:04:58 +00:00
cwabbott
23db2e9601 Fix UAVObject stuff for win32 sim, and fix pios_servo as well. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2675 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 19:11:24 +00:00
peabody124
c3aa5ed8f3 Posix: Add the constants for telemetry queue sizes and also make the actuator 
SetHz calls compatible with the PiOS API change

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2672 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 15:47:02 +00:00
peabody124
d33d044088 Revert "Revert "Fix to make stacs auto-loading of UAVObjects downwards compatible, since its not working on all architectures"" 
Putting Corvus patch back in.  Need to delete uavobjects-synthetics directory
for this to work.

This reverts commit 9cd98bec8fb5e0679c625eb256a94d161a8ce345.

Conflicts:

	flight/CopterControl/Makefile

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2671 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 15:46:59 +00:00
peabody124
f93ed5f01f CC Module memory: Make it clean for CC to override the stack sizes of modules 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2668 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:18:35 +00:00
peabody124
b1e4b65f3d CC-1 Bigger oversampling window for CC sensor data 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2667 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:18:31 +00:00
peabody124
1c6b51b704 UAVObjects/AttitudeSettinsg: Object for CC to tune the attitude estimation 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2666 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:18:26 +00:00
peabody124
15f3ada700 Get rid of ms * 10 units since the time resolution of FreeRTOS is in ms 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2665 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:18:22 +00:00
peabody124
3f088bed8d CC-9 1. Improve the timings of the attitude estimation 
2. Disable FirmareIAP module in CC (somehow causes lockups when also using vTaskDelayUntil in Attitude WTF)
3. Make the SPI bus run a little faster so we can handle the 3200 Hz from accel
while running the filter at 333 Hz

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2664 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:18:19 +00:00
peabody124
8b2034ea05 CC-15 Settings: Delete settings from flash chip (hacky sector based saving) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2663 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:18:15 +00:00
peabody124
97acaa2402 CC-15 Gets settings saved to flash chip on CC using crude sector based storage. 
Sector based on Object ID so could overlap :-(.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2662 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:18:12 +00:00
peabody124
ea91042f38 CC-6 Fixed bug in flash read write addresses 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2661 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:18:08 +00:00
peabody124
e27c9c0b7a CC-6 Rename Flash function to not be all upper case consistent with other PIOS 
functions

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2660 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:18:04 +00:00
peabody124
1d2ad6e9cb Telemetry: Move the telem stack size to the board definition file since CC 
needs less

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2659 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:17:59 +00:00
peabody124
c9207b3754 CC-14 PIOS/Servo: Set more than two bank speeds 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2658 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:17:55 +00:00
peabody124
200f9a7247 FirmwareIAP: Whitespace fix, spaces to tabs 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2657 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:17:51 +00:00
peabody124
79ed1578a8 Update XCode project 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2656 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:17:46 +00:00
peabody124
1cf7555b7d CC-10 Rename CCAttitude to Attitude. If there are alternative ones we will 
just have nested subdirectories of Attitude

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2655 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:17:40 +00:00
peabody124
85d42868d6 CC-10 Rename the TaskInfo and Alarm field for CCAttitude to Attitude 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2654 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:17:36 +00:00
peabody124
063c58e7c0 CC-12 Enable Watchdog on CC 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2653 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:17:32 +00:00
peabody124
037a63ee1d CC-1 CC-8 Cache the oversampled gyro value and use that to get rid of glitches. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2652 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:17:27 +00:00
peabody124
bbbdea26b9 Revert "Fix to make stacs auto-loading of UAVObjects downwards compatible, since its not working on all architectures" 
Note: This patch did not build after a clean build.

This reverts commit 7e75b5d16481a32689433c868b67916816d8b9fb.

Conflicts:

	flight/CopterControl/Makefile

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2651 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 01:56:02 +00:00
peabody124
87881734b0 Add GDB debugging scripts for CC and PipX 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2650 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 01:55:58 +00:00
peabody124
29ad7b3017 CC-13 Get FirmwareIAP reset working on CC 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2649 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 01:55:54 +00:00
peabody124
42b21a2697 OP-300 FirmwareIAP: Change to use event dispatcher callback to determine when 
to reset OP (sends reset command to INS)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2648 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 01:55:43 +00:00
corvus
c2ba1f517b Fix to make stacs auto-loading of UAVObjects downwards compatible, since its not working on all architectures 
On architectures supporting automatic initializing, flight/UAVObjects/uavobjectsinit_linker.c is used
On architectures NOT supporting automatic initializing, an uavobjectgenerated file build/uavobject-synthetics/flight/init/uavobjectsinit.c is used
build/uavobjects-synthetics/flight/uavobjectsinit.c went away, so that a wildcard include in the Makefile will not include the (wrong) initialisation code in either version



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2640 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-31 20:37:11 +00:00
corvus
dcb9764647 added include file for auto-linking to sim_posix 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2639 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-31 17:39:23 +00:00
pip
57c7633476 Renamed uavtalk module to api mode 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2637 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-31 15:44:39 +00:00
stac
880a68a788 uavobj: Convert bootloader-compatible builds to autogen init 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2633 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-31 00:57:24 +00:00
stac
b5426e09d0 uavobj: Convert CC over to use autogenerated uavobjinit 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2631 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-30 22:46:51 +00:00
stac
083e2b01a9 uavobject: Use linker to produce uavobj initcalls 
The UAVObject initcall list is now automatically
generated at link time based on the exact set of
UAVObjects linked into the firmware image.

This will allow any subset of UAVObjects to be
used in any firmware image.

The uavobj_initcall() macro automatically adds the
marked function's address into the .initcalluavobj.init
ELF section.

The UAVObjectsInitializeAll() function now simply
iterates over the functions listed in the
.initcalluavobj.init section and calls them.

You can see the contents of this section in the ELF file
like this:
  ./tools/arm-2009q3/bin/arm-none-eabi-objdump \
      --syms -j .initcalluavobj.init \
      ./build/openpilot/OpenPilot.elf

This is fundamentally the same mechanism that the Linux
kernel uses to initialize the specific set of components
that the user has selected in their kernel configuration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2630 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-30 22:46:48 +00:00
FredericG
a8bd4d28ad OP-174 ET OSD, do not return from task, the system seems to crash when you do that; anyway the thread will be removed 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2625 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-29 17:47:40 +00:00
corvus
04d3a9649d CopterControl: reverting previous commit - doesn't work on windows due to command line length limitations 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2624 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-29 16:15:16 +00:00
pip
5daf6fd1c0 Added PIP_DUMP_RAW option in ahrs.c and brought back public acces to function PIOS_ADC_GetOverSampling(void). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2623 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-29 15:59:35 +00:00
corvus
000a45f1bf CopterControl - Build CopterControl with a Makefile specified subset of UAVObjects - code generation by uavobjgenerator 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2622 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-29 12:36:41 +00:00
zedamota
8236bf8e19 CC-13 CopterControl bootloader - don't know if this fixes it, please try it. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2614 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-28 21:02:48 +00:00
corvus
6f2e45d414 BigMess: OpenPilot/Makefile: do not have an explicit list of UAVObjects in Makefile, include by wildcard uavobjects/*.c 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2612 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-28 20:19:53 +00:00
sambas
f3ce7d7035 OPOP-303 PIOS/Sonar: posix fix, I guess?? 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2611 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-28 19:59:35 +00:00
sambas
ba5ebb6b13 OP-303 PIOS/Sonar: preliminary support for HCSR04 ultrasound altimeter module, tested and working :) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2610 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-28 19:21:22 +00:00
peabody124
ac031d9b0d OP-256 RC 3 is using TIM5 but wasn't previously handling this ISR. Passing to 
the PWM ISR now.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2607 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-28 16:01:40 +00:00
sambas
d917ced2f6 Fix for pwm input reset problem? Try the line I commented out because I can't test this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2606 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-28 13:30:12 +00:00
corvus
0cc957bc9c reverting bad commit of these files 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2605 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-28 12:31:13 +00:00
corvus
e6004ae95e PiOS.posix - split up FreeRTOS port into a linux version (original FreeRTOS linux code) and a non linux POSIX compatible version (Mac OSX, BSD, ...) - OS detection by Makefile.posix 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2604 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-28 12:26:45 +00:00
corvus
0624173489 Big Mess: Cleanup Openpilot/Makefile.posix - UAVObject generation paths and pylib stuff 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2603 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-28 11:44:37 +00:00
sambas
195b63b6bb OP-22 PIOS/Spektrum: Made spektrum input driver, NOT YET TESTED!!!, also preliminary support for CC, sync/supv timer not yet fixed. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2602 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-28 09:25:30 +00:00
edouard
df0b5f9b6c CC-13 CopterControl bootloader first pass. Does not talk on USB for some reason, but starts. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2601 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-27 22:33:13 +00:00
peabody124
99eb1a89f9 CC-5 PIOS/Servo: CC default servo position was 2000 from testing. HUGE SAFETY 
ERROR

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2593 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-26 01:25:29 +00:00
peabody124
c759253b77 CC-6 Flash chip working to read ID. Also tweaked how the semaphore for the SPI 
bus is used to be a bit safer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2591 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-25 17:46:27 +00:00
peabody124
92dd78db51 OP-256 PIOS/PWM: Disable from the pios_board.c file when not using PWM 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2589 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 23:17:39 +00:00
sambas
eb6ebb93d2 Build: last patches for windoes, and output targets 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2586 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 20:34:29 +00:00
peabody124
1daabba5c1 Build: Change the lower makefiles to use forward slashes but also create 
directories on
windows

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2585 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 20:01:06 +00:00
peabody124
ba1d519192 Get CC working with new file locations and also fix AHRS build to work with 
these locations

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2581 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 08:14:00 +00:00
peabody124
3b0be12b67 OP-291 PIOS/Servo: Fix a few interrupt mappins for OP 
Also keep the priority of actuator at idle+4, dropping it down slipped through

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2580 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:52:20 +00:00
peabody124
00a3e82c70 CC-6 PIOS/SPI: Add semaphore to SPI device structure that can be used to ensure 
only one CS line is asserted.  No checks are enforced on this by the SPI code
as I cant see a clean way of it being aware of the CS lines.  We could add
another CS mode those which is driver managed per transfer and has a GPIO i
line for each device.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2579 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:52:17 +00:00
peabody124
d2f3e0d379 CC-6 Initial code for the flash chip on CC 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2578 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:52:14 +00:00
peabody124
7554021ed0 OP-256 PIOS/PWM: Set the interrupts correctly 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2577 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:52:11 +00:00
peabody124
d4b4a6ca37 CC-3 Modules/CCAttitude: Add oversamplign to the accel data 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2576 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:52:08 +00:00
peabody124
21e3441f00 CC-3 Set gyro to downsample 10x to 250 Hz 
Conflicts:

	flight/CopterControl/System/inc/FreeRTOSConfig.h

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2575 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:52:05 +00:00
peabody124
cef46edafd Manual Control: Drop the AHRSSettings dependency to bring task memory down 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2574 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:52:03 +00:00
peabody124
23599ee59f CC: Set the buffer size of USART smaller and register teh AHRSSettings 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2573 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:59 +00:00
peabody124
e16b1bffa9 CC-3 Remove unused code from CCAltitude 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2572 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:56 +00:00
peabody124
2881370eab OP-291 PIOS/Servo: Refer to channels by TIM_Channel_x to be consistent with PWM 
system

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2571 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:54 +00:00
peabody124
d5ccb59b5a CC-3 CC Complimentary filter: Strip out some unused code and get the sampling 
rate up

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2570 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:51 +00:00
peabody124
99fcd089d4 OP-291 PIOS/Servo: Make the remapping of timers a part of the driver structure 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2569 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:48 +00:00
peabody124
da96ce15b9 OP-256 PIOS/PWM: Converting PWM input to use standard driver structure. 
Beginning of unifying the input types into PIOS_RECEIVER.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2568 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:45 +00:00
peabody124
01b09668aa OP-291 PIOS/Servo: Dont need to power up GPIOA/GPIOB in servo since done in sys 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2567 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:41 +00:00
peabody124
99f2f3c68b OP-291 CC Servo configuration: Gets S5 and S6 working 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2566 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:38 +00:00
peabody124
108ea8c959 OP-295 Get CC pin mappings consistent for using the temperature sensor 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2565 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:34 +00:00
peabody124
edced9177c OP-291 PiOS/Servo: Converting output to use driver system 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2564 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:32 +00:00
peabody124
80c97ddfd0 CC-2 CC-3 Modules/CCAttitude: Flip the up-down convention of the board 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2563 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:29 +00:00
peabody124
607cdcac21 Upgrade FreeRTOS to the latest version (6.1.1) which allows compiling with -Os 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2562 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:26 +00:00
peabody124
c55d40bdbc CC-3 Setting up monolithic task template to keep code size down. Importantly 
switch to heap_1.c which saves a lot of money.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2561 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:22 +00:00
peabody124
95e7017674 OP-286 UAVObjectManager memory usage: Since first element in linked list always 
exists, no need to store pointers to it, but put the structure for the first LL
object in the ObjectListStruct

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2560 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:20 +00:00
peabody124
3fc8169330 OP-286 UAVObjectManager: Dont store pointer to initialize function for 
UAVObjects, but pass it in from the macro definition.  Saves memory for each
objects.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2559 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:17 +00:00
vassilis
000a7bb54e Flight/Makefile: Fix build error - could not find include files of generated code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2557 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 02:38:32 +00:00
cwabbott
eeac20d4ae The Big Mess part 4: win32 and posix sitl. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2555 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-23 20:30:25 +00:00
sambas
ae324ffd6e 3rd for Big Mess, bootloaders and pipxtreme 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2549 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-23 18:51:43 +00:00
FredericG
f7e6f998ca OP-288 Slight simplification of the ManualControl module 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2548 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-23 18:38:00 +00:00
sambas
826ce00bf4 another one for Big Mess 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2546 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-23 18:18:52 +00:00
FredericG
70f11543e0 Fixed debugging via Servo PWM pins 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2544 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-23 18:11:47 +00:00
stac
8223580783 jtag-revb: add eeprom config file 
The floss-jtag-revb has an on-board EEPROM which can be used to
hold a serial number.  This greatly simplifies using OpenOCD
debug environments with more than one JTAG attached to the same
PC.

See the FLOSS JTAG revB section of this page for instructions on
how to configure the EEPROM on Linux:
  http://wiki.openpilot.org/display/Doc/Software+Development+on+Linux

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2540 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-23 08:06:13 +00:00
vassilis
b297ef0ae5 Flight/FlightPlanner: First release of openpilot.py library giving access to RTOS and debug fields. Implemented STOP command, this should be the normal way for stopping scripts. The KILL command should be only used as a last resort for misbehaving scripts. The KILL command will delete the VM thread. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2535 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-22 21:32:23 +00:00
stac
2d53902148 UAVObjects-flight: Move generated files into build dir 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2520 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-22 17:38:15 +00:00
peabody124
bcdd87689a OP-295 Modules/SystemMod: Get the internal CPU temperature sensor and store in 
system stats when available

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2511 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-21 17:18:24 +00:00
peabody124
65e02eeb25 OP-293 PIOS/ADC: Fixed issue with DMA engine and odd numbers of channels not 
accounting for the fact they are transferred in pairs when using ADC2

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2510 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-21 17:18:20 +00:00
pip
7bcdcee5ad Capitalised #define values 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2507 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-21 16:48:03 +00:00
pip
500a199a70 Added deg_to_rad & rad_to_deg to help understanding calculations. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2501 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-21 10:52:41 +00:00
peabody124
2d9f7f32d1 OP-291 PiOS/Servo: Converting output to use driver system 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2499 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-21 03:40:21 +00:00
pip
3d2f78ae9a Removed pipx entries 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2498 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-20 23:01:20 +00:00
pip
8b5ae6aef9 Removed PipXtreme entries 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2491 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-20 20:41:43 +00:00
vassilis
3a755826a5 Flight/FlightPlan: Fix build issue with rev 2480 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2485 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-20 02:25:09 +00:00
cwabbott
e73da04cc6 PiOS.win32: changes according to rev 2480, fix compile error in manualcontrol.c, add vTaskDelete() to win32 FreeRTOS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2484 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-19 23:52:11 +00:00
pip
5f87966727 Corrected "mag_data.raw.axis[]" indexing errors 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2482 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-19 15:20:17 +00:00
vassilis
d7fd8a3bcd Flight/FlightPlan: Enable Python VM and test flightplan execution. From now on a Python executable needs to be in the system path as it is used in the Makefile. 
A test script is statically linked (will eventually be uploaded by the GCS and stored in the VM), it can be found under: Modules/FlightPlan/flightplans/test.py

To start the script send the FlightPlanControl object with the Start command, to stop send the Stop or Kill commands.

Next release will be the OpenPilot python libraries and access to UAVObjects from the script.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2480 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-19 03:34:01 +00:00
osnwt
780f441ae9 OP-289/Flight: do not use RC input if disconnected. Quick fix until better arming system is designed. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2479 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-19 00:01:33 +00:00
FredericG
76420d7972 OP-288 Simplification of ManualControl code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2478 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-18 19:30:50 +00:00
FredericG
9758026d5a Added some comment, made some functions static 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2476 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-18 17:51:29 +00:00
peabody124
56dd0569b8 CC-2 Complimentary filter working on copter contol, nice attitude 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2475 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 08:45:43 +00:00
peabody124
cf17569de7 CC-1 Modules/CCAtttitude: Calling the ADXL345 library and getting the accel and 
gyro data into attitude raw.  Hardcoded calibration for now.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2474 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 08:45:40 +00:00
peabody124
18deba48c1 CC-6 PIOS/ADXL345: Helper functions for the ADXL345 chip. Need to add 
semaphores for sharing the bus between the flash chip and this though.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2473 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 08:45:37 +00:00
peabody124
211585c7d7 CC-1 Modules/CCAttitude: Initial reads from accelerometer 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2472 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 08:45:34 +00:00
andrew
ce87b8f05a OP-274 
Fixed Changing of Debug port baud rate only to occur when debug is enabled
Fixed brief in header file

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2470 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 04:02:37 +00:00
peabody124
21b4e55029 OP-14 OP-16: I2C Improvements 
1) Added nack counter monitoring
2) Made timeout for getting semaphore in I2C user space code use the one from
driver and record timeouts.  This does not influence timeouts in the non
FreeRTOS case
3) Remove case block from the error handler so that all bus errors reset the
i2c interface

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2469 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 02:11:12 +00:00
peabody124
0e441a20f3 OP-14 OP-16 I2C: When sending STOP signal after NAK, mask interrupts first 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2468 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 02:11:08 +00:00
peabody124
8959007a38 Flight/Actuator: Log the longest update of motors in ms, not ms * 10 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2467 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 02:11:05 +00:00
peabody124
0d567f4e4b OP-14 I2C: Don't log a NAK as an error and also after NAKs seem to get an event 
from the stop bit

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2466 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 02:11:02 +00:00
peabody124
31919241b8 OP-14 I2C: Adding new event to the ignore list 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2465 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 02:10:59 +00:00
peabody124
68536d2fd1 OP-14 I2C: Throw away 0 event in error handler 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2464 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 02:10:56 +00:00
cwabbott
3fe7fa0df4 PyMite: Change posix Makefile to use openpilot_sitl platform. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2463 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 00:04:16 +00:00
cwabbott
7f8ea5e55a PiOS.win32: updates to get it compiling again. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2462 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 00:00:41 +00:00
peabody124
c2bdf624e8 OP-269 PIOS/ADC: Previous ADC driver update changed the PCLK2 divider for all 
projects which messed up a timer on OP and serial on PipX.  Now this is only
changed for AHRS.  Ideally wouldn't even change for that but then ADC runs too
fast and we get a lot more CRC errors for dealing with all that data.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2459 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 23:00:48 +00:00
edouard
b3ca037308 OP-277 Update all files to use a BOARD_TYPE and BOARD_REVISION scheme through the whole codebase. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2458 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 20:41:55 +00:00
pip
ddaa306248 Removed ADC usage - this appears to fix the pipx serial port problem. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2457 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 19:32:53 +00:00
FredericG
c2613ffa88 Spaces->tab no code change 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2456 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 18:49:27 +00:00
FredericG
3f1ad074df OP-246 Configuring arming/disarming; using field to ManualControlSetting to define which channel is used for arming or to disable arming 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2455 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 18:17:30 +00:00
pip
aedf731c07 Temporary override settings saved in flash. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2453 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 17:40:21 +00:00
peabody124
04a00c7327 OP-269 PIOS/ADC: Change the initialization code to work well when changing 
oversampling

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2452 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 16:02:53 +00:00
peabody124
ad7a6e6071 OP-269 PIOS/ADC: Only enable the half and full conversion flag for the double 
buffering

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2451 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 16:02:50 +00:00
corvus
75a6b406cd OP-273 - UAVTalk - prevent object update-bursts caused by involuntary synchronization in case of long delays or time-jumps 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2450 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 15:28:49 +00:00
corvus
115a581d7c PiOS.posix: porting some of the recent updates to PiOS.posix - compiles now 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2449 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 15:17:57 +00:00
corvus
6c3b887ae4 fixed line endings - mixed LF and CR+LF present - please keep it to either one of those or my editor gets crazy 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2448 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 11:24:43 +00:00
corvus
bbe013fc82 fixed line endings - mixed LF and CR+LF present - please keep it to either one of those or my editor gets crazy 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2447 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 11:20:52 +00:00
corvus
b4fdd67b4b fixed line endings - mixed LF and CR+LF present - please keep it to either one of those or my editor gets crazy 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2446 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 11:19:13 +00:00
cwabbott
4181d1de05 PyMite: Oops, delete some autogenerated files that are not needed. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2445 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 03:24:43 +00:00
peabody124
0259b6d1f1 OP-269 PIOS/ADC: First part of conversion to driver structures 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2444 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 02:45:39 +00:00
peabody124
ab75e8117f OP-265 CC: Getting GPIO lines working 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2443 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 02:45:34 +00:00
peabody124
d4460aa97f Deleting unused file from svn 
Conflicts:

	flight/AHRS/ahrs_adc.c

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2442 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 02:45:31 +00:00
peabody124
33f3500e64 CC-3: New module for copter control 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2441 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 02:45:27 +00:00
peabody124
81b0c3fdb6 OP-269 PiOS/ADC: Moved AHRS ADC code to PiOS and made all the projects use it 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2440 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 02:45:22 +00:00
cwabbott
24a058c8c7 PyMite: add a new 'openpilot_sitl' platform which allows for stdio to the console and make it the default platform for win32 SiTL. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2436 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-15 17:10:10 +00:00
osnwt
290c9c538f Replace decimal OBJID representation in auto-generated headers by hexadecimal (taking advantage of new UAVObjGenerator). It makes easier to read and compare them with files on SD card. This does not change OBJID values and should be completely transparent. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2434 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-15 17:00:17 +00:00
sambas
f0b161f7b9 Updated my workspace files to support all boards known today 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2432 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 15:45:08 +00:00
zedamota
ad0b3e911d OP-268/PipX Bootloader - Changed Timers for MD device, auto memory space fetching (as per people request ;)). Stripped unused functions to reduce size. 
TESTED WORKS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2431 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 15:33:24 +00:00
pip
3d8edce5ee More speed improvement to the AHRS_ADC_downsample_data() function. Removed a bypassable multiple inside the inner loop. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2430 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 12:40:29 +00:00
pip
403c9ea2da Improved AHRS_ADC_downsample_data() efficiency/speed. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2429 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 12:31:34 +00:00
peabody124
ad7a4cded0 OP-265 PIOS/USB: Put USB buffer size in the board file 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2428 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 02:15:19 +00:00
peabody124
4528afe4de Update the makefile to allow compiling the PipX and XCode project 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2427 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 01:48:50 +00:00
peabody124
94ff276522 OP-265 CC: Tweaking objects included and the memory requirements 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2426 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 01:38:49 +00:00
peabody124
8a32d88b10 OP-265 CC: More work to get it running 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2425 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 01:38:47 +00:00
peabody124
de51286524 OP-266: Rename openpilot.c to coptercontrol.c for CC 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2424 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 01:38:44 +00:00
peabody124
c59a1ff018 OP-265 OP-266: FreeRTOS configuration per project because of available heap 
size (may eventually need to be per revision if we get bigger ram).  Typo in a
the ifdefs to get allow disabling SDCARD

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2423 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 01:38:42 +00:00
peabody124
ea851803af OP-266 CopterControl: Continue trying to strip out as much as possible to get 
it to fit

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2422 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 01:38:39 +00:00
peabody124
f0c36b13a4 PiOS/USART: Use the buffer size defined in the board file 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2421 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 01:38:37 +00:00
peabody124
7c9b3b3d69 OP-265 AHRS: New file locations 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2420 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 01:38:34 +00:00
peabody124
2c335edd7f OP-266 CopterControl: For now no USB support for code size 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2419 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 01:38:32 +00:00
peabody124
79caad654b CopterControl: Don't need altitude sensor support 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2418 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 01:38:30 +00:00
peabody124
9cf3ee9fb3 OP-267 Flight/UAVObjectManager: Make all references to DFS function depend on 
PIOS_USD_SDCARD.  However, this needs to be cleaned up and abstracted out of
the UAVObjectManager who shouldn't care about the storage layer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2417 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 01:38:27 +00:00
peabody124
940792db5c OP-265 CopterControl: Fork main OpenPilot directory 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2416 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 01:38:24 +00:00
peabody124
fc54159369 OP-265 Flight reorganization of UAVObjects and Modules up a directory 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2415 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 01:38:19 +00:00
peabody124
982f2dd8af OP-261 Clean up GuidanceSettings to be more intuitive 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2414 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 00:52:00 +00:00
peabody124
c141b02339 OP-261 Drop PositionPID mode from GuidanceSettings 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2413 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 00:51:57 +00:00
peabody124
aa8d9eb178 OP-261 Magic Waypoint: Accel feedback for position hold 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2412 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-14 00:51:54 +00:00
cwabbott
db9bc06a08 Added support for FlightPlan in win32 SiTL and fixed line endings in Python files, 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2411 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 23:54:30 +00:00
pip
c7ecfd2f60 Fixed pios_board.h to include the pipx .h file 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2407 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 19:37:01 +00:00
pip
b647d93add Added pipx board file. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2406 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 19:34:59 +00:00
pip
06c5e9665a removed pios_board.h 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2405 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 19:22:54 +00:00
pip
13e3d37ef4 Fixed Watchdog compile problems 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2404 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 19:15:12 +00:00
peabody124
07798bb2db PIOS/WDG: Add back the returned delay for code that wants to clear WDG more 
rarely

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2403 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 19:01:33 +00:00
pip
86fc4d2d1c Recovered and added missing file. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2402 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 18:19:15 +00:00
zedamota
691c58a583 OP-268/PipX Bootloader - Changed the size of BL def. 
New naming convention for the linker files:
link_(board_name)_(density)_(bl usage).ld

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2401 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 17:34:22 +00:00
zedamota
301d9cddfc OP-268/PipX Bootloader - Trunk integration of Edouard's work. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2399 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 15:57:30 +00:00
zedamota
1f89ee1865 OP-21/Bootloader - Change HW ID to 16bits. Should still be compatible with the old version. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2398 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 14:36:32 +00:00
ligi
2db5d0eb1a removing autogenerated flight/uavobject files with @ref http://forums.openpilot.org/topic/2811-uavtalk-code-generation/ 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2396 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 10:22:44 +00:00
pip
df45cb7be8 PipX modem full source code moved into public SVN. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2394 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 08:45:18 +00:00
FredericG
cf71281bf4 OP-241 Fixed small issue with arming timeout + some refactoring of the arming/disarming code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2393 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 07:48:46 +00:00
cwabbott
0f965df11e SiTL: Updates for UAVObjects, and for the recent Actuator and Watchdog changes to compile with SiTL. Posix needs to be tested. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2387 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-12 00:39:18 +00:00
pip
a1b03ef55c Added http reference address for source of coeffs and c code for if and when new coeffs are required. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2383 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-11 15:45:16 +00:00
pip
b3d1c1f822 Added a return code test when calling WMM_GetMagVector() function. If returned code is error then don't set home location. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2382 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-11 11:15:27 +00:00
pip
7b50e09eb9 Fixed possible memory leaks. Now check for NULL pointers from all MALLOC calls. Functions now return '0' if OK, otherwise returns a value < 0. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2381 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-11 11:11:23 +00:00
peabody124
d846288cec OP-14 I2C: Remove delay in I2C IRQ handlers 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2378 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-11 03:50:23 +00:00
peabody124
5bcdfd6edd OP-239 OP-210 GPS memory usage: Pip catching the memory on the stack in the WMM 
means this task only needs 800 bytes (of which only 120 is for the WMM).  Free
heap is now 9k.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2376 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 21:31:31 +00:00
pip
1fbd7155f9 Moved a few large variables off the stack to dynamically allocate them from the heap (http://progress.openpilot.org/browse/OP-225). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2374 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 20:30:47 +00:00
peabody124
2fee1781ec OP-239 OP-210 HomeLocation: This was causing resets on the board due to not 
enough memory.  Increase task memory a little.  I'm not sure that it's possible
to make the WMM memory usage less.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2372 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 18:45:16 +00:00
peabody124
3abcfc9608 OP-251 UAVObject/WatchdogStatus: Sorry forgot files earlier for monitoring what 
triggered previous watchdog resets

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2369 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 05:42:57 +00:00
peabody124
bbbd9a10e3 OP-14 I2C Diagnostics: Improve the logging so that the events going into FSM 
are logged, and separately the erirq and evirq logs are exported

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2368 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 05:42:53 +00:00
peabody124
aae4d113f5 OP-237 Actuator: Woops, typo 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2367 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 01:13:55 +00:00
peabody124
b173d74821 OP-237 I2C ESC support. This _will_ require you to reconfigure your 
ActuatorSettings although for PWM aircrafts it should be done exactly as before

Actuator: Store the update times and maximum update time

OP-14 I2C: Start tracking short history of events and states in driver for
logging
OP-237 Flight/Actuator: Support for I2C based ESCs

OP-237 MK_ESC: Send all four motors as one atomic transfer

OP-237 Flight/Actuator: Allow channels to be mapped to MK I2C interface.  Currently
mixer channels are either PWM or MK but in the future this will change to
support more than 8 channels.

OP-16 PiOS/I2C: Further work to try and make I2C more stable, mstly special case
handline in IRQ

OP-237 I2C ESC: Support for Astect 4 channel ESCs

OP-237: When the I2C Actuator write update fails track this

OP-237 Actuator Settings: Change the way motor types are selected to keep that
information more appropriately within ActuatorSettings instead of MixerSettings

Also make motors stay at or above neutral when armed and throttle > 0

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2366 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 01:11:44 +00:00
peabody124
ed11e64bb2 OP-251 Watchdog: Get rid of the old extra watchdog module and instead have 
tasks directly update a flag for each module (which they register) and when all
flags set clear the watchdog then.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2365 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 00:16:30 +00:00
vassilis
1e78cc7a30 Flight/FlightPlan: First release of flight plan scripting. The scripting engine is based on the PyMite Python VM. The released code is able to execute a simple python script on the target. However it is currently disabled from the makefile due to a few issues with more complex scripts. When the library is enabled in the makefile a python interpreter will be needed to compile the firmware since some intermediate code is generated by PyMite. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2364 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 22:36:15 +00:00
peabody124
e393000c34 OP-238 PIOS/SPI: Decrease pin clock rate from 50 to 10 Mhz. Since data at 
1.125 MHz this should slow down the slew rates

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2361 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 20:49:46 +00:00
peabody124
5734e1f437 OP-176 PIOS/ADC: Decrease the priority of the ADC DMA/IRQ 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2360 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 20:49:43 +00:00
peabody124
0175e25ddf Flight/ADC: If there is a DMA error for the ADC transfer dont copy those values 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2359 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 20:49:39 +00:00
peabody124
148ea6fdc1 Flight: Make PWM outputs default to 0 us to avoid either pushing servos to 
exteremes or running up motors

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2358 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 20:49:35 +00:00
peabody124
24c4e92b12 OP-176 FreeRTOS task priorities a bit more sensible 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2357 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 20:49:33 +00:00
peabody124
85b7619617 OP-176 OP-238 Flight/IRQ and DMA: Increased the priority of the AHRS DMA 
transfer, seems to reduce CRC errors

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2356 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 20:49:29 +00:00
peabody124
0f07d7f671 OP-240 OP-176 Flight: Setting the priority group back to 4 (anything higher 
priority preempts) and adjusting the priorities around to be more sensible.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2355 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 20:49:26 +00:00
vassilis
b851c11f53 Flight/Stack sizes: Reduced task stack sizes to free-up memory in preparation of the scripting release. If the firmware is unstable there might be a possible stack overflow, test carefully! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2350 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 00:03:19 +00:00
vassilis
407e660c97 Flight/TaskMonitor: Create TaskMonitor library, used to monitor the remaining task size of all running tasks. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2349 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-08 23:43:34 +00:00
peabody124
d8022a320d OP-238 PiOS/USB: Fix for problem Ed's being see where being plugged into usb 
but not having telemetry causes a reset.  If the buffer got full enough it
would never start to transmit again.

Note: also making Telemetry non-blocking

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2346 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-08 08:05:02 +00:00
peabody124
ccc8bc089b OP-235 AHRS: Not sending the out of range values to the mainboard was blocking 
calibration.  Now only don't send them to the EKF.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2342 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-06 16:44:40 +00:00
cwabbott
050ade4899 PiOS.win32: UAVObject changes, and double the timer tick length to accommodate the MMCSS-set timer tick and be more in line with PiOS.posix. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2341 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 22:47:47 +00:00
pip
75793a1687 Now using down-sampling on the baro temperature & pressure readings. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2338 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 12:19:49 +00:00
pip
572284966d Forgot to add "#ifdef ALT_PRES_MAF" into init code. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2337 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 11:28:04 +00:00
pip
cb8e9ef07b Added a moving-average-filter to the pressure reading, and increased BMP085 oversampling from 2 to 3 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2336 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 11:26:47 +00:00
peabody124
6eae425644 OP-235 AHRS: Because of range checking at initialization the EKF can be blocked 
(which is good) but that stops the comms polling.  This makes it happen
ocassionally but not too much.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2335 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 10:34:48 +00:00
peabody124
77d798071e OP-235 AHRS: Check the downsampled data for either being ridiculously out of 
range of NaN.  This would reflect a race condition probably from the SPI
interaction.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2334 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 10:34:45 +00:00
peabody124
0e7661539e OP-238 AHRS Comms: Bring down clock rate of comms to AHRS to 2.25 MHz. Decrease 
to only transmitting one object per transmission too to keep size down.
Also move to using the driver structure so the paramter is in a clear place.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2333 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 10:34:42 +00:00
peabody124
3e9ee37c73 Flight/ManualControl: Require the roll signal to only go to 0.90 to arm and 
disarm

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2332 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 10:34:39 +00:00
pip
4a91f20277 Turn AHRS orange LED on at bootup (to try and spot possible bootup hangs). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2331 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 09:15:37 +00:00
corvus
a59d08b7af AHRS: Support for Linear Temperature Compensation Factors for Gyroscope X,Y,Z 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2327 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-04 00:54:31 +00:00
andrew
af77839747 OP-84 
Battery module for Power Sensor version 2
This is the first checkin of code for the new sensor board.
This has been tested for Voltage calibration bit not Current yet.
This will set and clear system alarms appropriately.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2323 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-03 01:23:04 +00:00
corvus
c01676eed2 sim_posix: Makefile: fixed line ending - and added missing UAVObject 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2314 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-31 19:31:55 +00:00
edouard
3bad347386 Reverted a change which caused resets on the MB under certain conditions. Should be back to normal now. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2311 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-30 19:24:57 +00:00
pip
c8a1a6771c Added "AHRS_ADC_GetOverSampling" function 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2308 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-29 10:34:48 +00:00
sambas
0b2a0884ae OP-22 Flight/PiOS: Spektrum improvements, removed my zero throttle glitch 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2306 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-28 18:37:36 +00:00
peabody124
7ccdb296ac AHRS: Add interface to get old dump_raw function working for Pip 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2305 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-28 17:48:45 +00:00
andrew
c396279a37 Preparing Battery module for Power Sensor version 2 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2304 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-28 05:46:14 +00:00
andrew
eda227ec8b Added BatterySettings UAVObject in preparation for updates to PowerSensor code. 
As this changes UAVObjects both flight and GCS software will need to be recompiled to stay in sync.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2303 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-28 05:13:19 +00:00
andrew
76be2b991b Update to FlightBatteryState UAVObject in preparation for updates to PowerSensor code. 
As this changes UAVObjects both flight and GCS software will need to be recompiled to stay in sync.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2302 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-28 04:28:39 +00:00
andrew
2f38fe2269 Updated Alarms.c Modified flight alarm code to NOT set SystemAlarms to an "Uninitialised" value on startup. 
This allows the UAVObjectGenerator generated code to set the default values.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2301 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-28 04:19:41 +00:00
peabody124
2b0c75e46d AHRS: Fix LED flashing light 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2300 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-28 02:10:52 +00:00
andrew
bdb2982ca5 Added alarm processing for GPS module. 
Error when GPS disconnected
  OK when >=7 satellites and PDOP <3.5
  Warning when only 3Dfix
  Critical otherwise

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2297 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-27 19:59:43 +00:00
pip
26650724e4 Fixed coding error on line 317 .. changed while (xxx & xxxx) to while (xxx && xxxx) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2296 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-27 09:48:11 +00:00
andrew
e7e0f6740b Modified flight alarm code to set SystemAlarms to an "Uninitialised" value on startup. 
This means that any defined alarms that don't have their flight module compiled in will show uninitialised rather than OK

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2295 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-27 07:30:36 +00:00
andrew
39cb30d56f Update to SystemAlarms UAVObject. 
Added:
Battery
Flight Time
I2C
GPS
Also added new alarm state of "Uninitialised"

no code to set these alarms yet.

As this changes UAVObjects both flight and GCS software will need to be recompiled to stay in sync.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2294 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-27 07:25:52 +00:00
peabody124
c364f45fb7 AHRS: If using mags then don't initialize until get a good mag update within 
250 ms of init call (mag works at 10 Hz).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2289 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-26 18:59:32 +00:00
peabody124
343b4095a3 Flight/WMM: Get rid of date structure and keep it on stack. Also don't need 
error message for embedded stuff.

Note: this was only tested on PC although I'm fairly confident about it.
Please let me know about any errors.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2285 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-24 21:57:15 +00:00
peabody124
b8476bea20 WMM: Memory reduction, variables computes from flash constants on fly. This 
will run slower but greatly reduce the memory footprint (360 floats less).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2284 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-24 21:57:12 +00:00
peabody124
35bc1e7d9b Flight/AHRS: Make the mag raw data always update regardless of home location 
settings but only be used when home location is valid.  Also discard any mag
data that is all zeros although we shouldn't see this.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2283 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-24 20:21:22 +00:00
peabody124
314a2fcf00 flight/AHRS: Make the 13 state INS default again, the accel bias drift can be a 
little aggressive.  Also increased the drift rate of the gyro bias per Sambas'
testing (thanks) although not to the levels required for flying through 40 deg
C transitions.

Made the dump_ekf function handle both numbers of states

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2282 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-24 19:38:54 +00:00
peabody124
7ab6dfeeba PiOS/USB_HID: Lower priority of USB interrupt 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2280 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-24 17:16:07 +00:00
peabody124
1142b1fb1e PiOS/USB_HID: No longer clear buffer after getting a NAK. This was required 
before because if transmission got NAK then sending would stop.  Now the next
time data is added to the buffer a new send will be attempted.

fifoBuf: in clearData just set the read pointer to the write pointer.  This is
safer for multiple people accessing it assuming the reader will be clearing it.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2279 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-24 17:16:04 +00:00
peabody124
ba8351f60a PiOS/USB_HID: When using FreeRTOS use a sempahore to stop multiple tasks 
pushing data to the transmit buffer

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2278 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-24 17:15:59 +00:00
pip
d072c30ba1 Settings additions. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2274 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-22 22:16:44 +00:00
cwabbott
7715a6d6cd PiOS.win32: Add MMCSS support for Vista onward, and smarter priority boosting to XP. Also, add the Actuator module and the fake pios_servo.c. If you run this using Windows 7 or Vista, then you need to run OpenPilot.exe as administrator once to set up the registry. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2270 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-22 14:47:42 +00:00
zedamota
14ef24a3de OP-21/Bootloader - Maximize flash space available for user code. Bring back delay on HID send (board->pc) it still hangs when blasted with data. AHRS is now Readable. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2263 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-21 17:25:24 +00:00
edouard
d8edab8371 Added a (fake) pios_servo module in PiOS.posix, this makes it possible to compile the Actuator module and see servo output values, or at least 
what they would be on a real board. Also fixed a typo in stabilization.c which made me lose time when trying to understand the code...




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2260 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-20 16:38:17 +00:00
osnwt
801568269c 2251 rev changes reverted. Let someone change UAVObjects to provide calibrated altitude and/or offset to HomeLocation and/or take off location (which can be quite different including elevation). But please do not forget that many of users do not have the GCS with Internet at field and/or do not have sufficient weather/baro/altitude condition info for their country. So the solution should provide also a way to 'drive-power-launch'. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2259 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-20 05:20:06 +00:00
corvus
1aa6a206db Sim_Posix: Updated Makefile to include some recently changed/new UAVObjects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2253 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-19 11:29:24 +00:00
osnwt
7d084aca49 Added power-up barometric altitude calibration. Height accuracy is not sufficient, for better results we may want some filtering and/or another sensor/ADC. But at least now the BaroAltitude.Altitude object provides meaningful data comparing to uncalibrated zero height. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2251 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-18 23:40:17 +00:00
zedamota
7f00e88321 OP-21/Bootloader - House cleaning only, shouldn't brake anything. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2250 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-18 20:41:13 +00:00
cwabbott
0b985b2168 PiOS.win32: Various fixes to get it working again, added a sim_win32 option to the main makefile. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2249 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-18 18:41:37 +00:00
pip
e84b222272 PipX modem settings update .. note that they do not yet function. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2248 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-18 13:54:35 +00:00
peabody124
ac24d86f40 AHRS Makefile: PT accidentially turned on DEBUG=YES when checking in 
FirmwareIAP to get me back for breaking Sys_Reset.  You got me! :)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2246 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-18 08:56:12 +00:00
peabody124
f010502229 PiOS/I2C: Was throwing out repeated byte transmitted events but this is 
required for longer sequences,  Need to deal with when it happens
inappropriately better.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2245 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-18 07:09:34 +00:00
peabody124
af99c31a61 PiOS/I2C: Fixed typo and also the values for I2C Diagnostics when disabled. 
Enabled by default though.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2243 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-18 07:09:28 +00:00
zedamota
917f03121d Fixes a problem with the reset function introduced on the new ST libs migration, it was preventing the user space reset used with the bootloader to function properly. 
I think someone still likes to honor his avatar :)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2241 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-17 14:16:58 +00:00
peabody124
4b4a66c2d7 PiOS/I2C: Lots of small changes. Added a few weird bus events that are 
sometimes thrown, and made errors not lock it up by default.  It works for me,
but since this has historically been associated with lots of lock ups please
check your systems carefully.

PiOS/I2C: Make the bus by default try to recover from errors instead of locking
up

PiOS/I2C: After a bus error and clocking all previous data create a STOP
condition to make sure bus is released (note, this also requires creating a
START condition first)

PiOS/I2C: If the same event hits the I2C bus twice in a row then disregard
second one, there is no situation where we should get the same event multiple
times that matters and this gets us out really quickly to catch the real
events.  I was seeing this with repeated 0x70084 which means byte transmitted.
This is related to STM32 bugs in the IRQ timings I believe.

PiOS/I2C: 1) Mask out some bits we don't care about in the event flags
2) Don't lock up if the give semaphore fails, although why it does is strange
3) Recover from bus failure through the "auto" state path instead of just
coding state

PiOS/I2C: Change the reset bus code to follow
http://www.analog.com/static/imported-files/application_notes/54305147357414AN686_0.pdf
(thanks for the reference Neontangerine).  Although this may actually NOT clear
the bus the first time through, subsequent bus errors should eventually clock
it out.  The up side is it is less likely to clock a bunch of 1s into an ESC
and make it run up.

PiOS/I2C: Some cleaned up code for getting a snippet of the history when
something strange happens

PiOS/I2C: Export logging information from I2C through a UAV object

PiOS/I2C: Improve the diagnostic information

PiOS/I2C: Need to handle the event 0x30084.  This seems to happen between a
byte transmitted and new byte started

PiOS/I2C: Handle the NACK condition by simply going to the stopping state.

PiOS/I2C: Add a new NACK state to handle sending the STOP signal after a NACK
following the STM documentation.  Other error conditions still are not dealt
with.

PiOS/I2C: Should handle the NACK condition from all the write cases.  Need to
think about read cases

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2239 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-17 07:01:58 +00:00
zedamota
c034a35d2c OP-21/Bootloader - Changes to the IAPObject. Implements MB and AHRS user mode IAPObject. Added user mode reset command to the CLI. To many changes to bootloading system to write here, a Wiki page will have to be writen. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2238 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-15 19:06:28 +00:00
peabody124
08e888ac8c Bootloader: Don't make it hang in bootloader by default. That's mean PT! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2236 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-14 01:59:15 +00:00
peabody124
36ea75bc0d Flight/HID: Change how the HID code handles the transmit buffer getting empty 
and starting transmission again.  This should address the bootloader locking up
on verify.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2235 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-14 01:43:16 +00:00
edouard
4be34fdb0f Modified all channel naming internally to use Channel 1 to Channel 8, instead of the previous convention of Channel0 to Channel7. 
BEWARE: I have not flown my quad with this code, so please be careful, test, and report!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2234 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-13 23:54:30 +00:00
peabody124
68c656a724 AHRS: Add back the old 13 state INS if wanted and also code for tracking accel 
bias as gravity vector facing down (bad for planes) which is diabled by
default.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2232 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-13 15:15:50 +00:00
peabody124
1086a6b567 Flight: Changes to STM library to work with our code. Basically all the 
configuration structures are const which keeps them in flash instead of ram.
However the library needs to declare them const for the compiler to work.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2231 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-13 07:03:28 +00:00
peabody124
18858571ce Flight: Updated to the latest StdPeriph libraries 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2230 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-13 07:03:24 +00:00
peabody124
9250470c98 Guidance: In velocity control use maximum groundspeed to cap the velocity 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2229 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-13 07:03:04 +00:00
pip
9ceda82fba Updated UAVObjects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2227 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-12 18:26:51 +00:00
pip
d5f6504aa2 Updated UAVObjects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2224 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-12 18:16:24 +00:00
pip
b4e4d4ed5e Adding PipX modem settings/status UAVObjects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2219 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-11 10:56:42 +00:00
pip
8b2e1c32d7 Adding PipX modem settings/status UAVObjects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2218 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-11 10:56:33 +00:00
peabody124
f30aa1d719 AHRS Comms: Send FirmwareIAP object to AHRS so that it can be remotely 
rebooted.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2214 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-10 21:03:29 +00:00
zedamota
cc5a4c2bb9 OP-21/Bootloader - NOT FUNCTIONAL 
Implements RS232(Telemetry) uploads using Kokomo's protocol.
This is a test version, the code will never timeout and jump to user space code.
If USB is connected on Power Up it will be used, if not RS232 will be used instead.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2211 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-10 19:11:29 +00:00
peabody124
fd10c6ffff Guidance: Small sign error 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2209 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-10 17:14:35 +00:00
peabody124
d218e18ded AHRS: Make arm timeout of 0 disable feature for planes. Don't want them arming 
out.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2205 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-08 20:07:34 +00:00
pip
5e91f46633 Added more telemetry baudrate options 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2198 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-06 08:31:24 +00:00
pip
49e99ea180 Added more telemetry baudrate options 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2195 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-06 08:23:20 +00:00
peabody124
e6a21977f1 OP-156 AHRS: Make the account for the fact the analog data is downsampled two 
times for each EKF update

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2193 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-04 18:13:08 +00:00
peabody124
4e8c6588b6 OP-156 AHRS: Run the accel data through a fifo so it can output raw data faster 
than the ekf runs and also be more tolerant of timing jitter

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2191 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-04 17:34:29 +00:00
peabody124
45e3ed27a7 OP-156 AHRS_ADC: Make the ADC system use a callback to better separate ADC code 
from the AHRS code (which will facilitate code integration with new INS) and
also will help set up a fifo queue for the downsampled data to allow gyro data
output from AHRS faster than EKF output.  Also decreased ADC interrupt priority
so the SPI comms don't drop out.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2190 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-04 17:34:27 +00:00
peabody124
6f1e7b4e41 AHRS: Add a configuration to export the sensor data either with or without INS 
bias correction.  This is useful for stabilization to get rid of the gyro bias.
Making it an option is important for calibration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2189 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-04 17:34:25 +00:00
peabody124
81b2f88e75 AHRS: Swap to new code which tracks accel_bias and export the accelerometer 
bias

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2188 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-04 17:34:22 +00:00