rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-04 12:24:11 +01:00
Code Issues Releases Activity
5,493 Commits 5 Branches 8 Tags 266 MiB
44140931ae
Commit Graph

604 Commits

Author SHA1 Message Date
James Cotton
95abb56d5e Added module to send updates out the SPI port 2012-02-02 09:19:25 -06:00
James Cotton
a778c45d6f For L3GD20 sensor task run at the sensor speed 2012-01-28 10:11:30 -06:00
James Cotton
13447ac907 Fix the MPU6000 implementation 2012-01-28 00:21:58 -06:00
James Cotton
b4435d0b35 For L3GD20 sensor task on revo update gyro once per physical sample 2012-01-26 23:29:12 -06:00
James Cotton
84dd1dbc40 A bit more lenient settings for CC sensor timings 2012-01-26 13:00:06 -06:00
James Cotton
727f0befc5 Make the gyro go a bit more regularly to stabilization but needs updating 
regular CC
 2012-01-25 22:50:19 -06:00
James Cotton
e4df3202e0 L3GD20: Update sensor task for revo to use the new queue 2012-01-25 22:50:19 -06:00
James Cotton
205aabe895 L3GD20: Make this sensor push data onto a FreeRTOS queue so that the sensor 
reading task can block according.  Also now the gyro data is sent to
stabilization multiple times per update of the attitude loop.
 2012-01-25 01:20:07 -06:00
James Cotton
1971ba30dc No longer hardcode baudrate 2012-01-24 23:42:43 -06:00
James Cotton
104c091590 Correct the range constants for the L3GD20 driver 2012-01-24 19:48:14 -06:00
James Cotton
a25d52785b Change the bus speed for the L3GD20 to 10MHz and some small cleanups 2012-01-24 19:17:49 -06:00
James Cotton
b6c056fef2 Use the updated L3GD20 format and make attitude.c use the gyro data from the 
fifo
 2012-01-24 15:52:17 -06:00
James Cotton
5efbfb02fa Make the BMA180 sensor system acquire from the queue. Correct the orientation 
and speed it up to 10 MHz communications.
 2012-01-24 15:09:20 -06:00
James Cotton
8c208412c9 Give the BMA180 a dynamically allocated device structure and also make it 
properly bind to a SPI and slave number.  Temporarily reducing spi bus to
slowest possible speed.
 2012-01-24 14:38:00 -06:00
James Cotton
8e79bc2ee2 Temporarily refactor attitude to directly read the sensors instead of pull from 
their queues until the interrupts are working properly
 2012-01-24 11:54:23 -06:00
James Cotton
e9552065a9 Reenable the CC3D sensors 2012-01-24 11:03:33 -06:00
James Cotton
c242ab8b86 Merge branch 'next' into revolution3 
Conflicts:
	flight/AHRS/ahrs.c
	flight/AHRS/pios_board.c
	flight/Bootloaders/Revolution/Makefile
	flight/CopterControl/System/pios_board.c
	flight/INS/pios_board.c
	flight/OpenPilot/Makefile
	flight/OpenPilot/System/openpilot.c
	flight/OpenPilot/System/pios_board.c
	flight/PiOS/Boards/STM32103CB_CC_Rev1.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/Revolution/Makefile
	flight/Revolution/System/inc/pios_config.h
	flight/Revolution/test.c
 2012-01-24 10:46:35 -06:00
James Cotton
486cdb5dbb Got CC running again although with altitude and bmp085 disabled as well as the 
CC3D drivers.
 2012-01-24 10:32:42 -06:00
James Cotton
4d3af7afbf Add ID test to ADXL345 2012-01-24 09:23:12 -06:00
James Cotton
728c05f973 Crude implementation of sensor reading for CC3D 2012-01-24 09:23:12 -06:00
James Cotton
11471ff68b Update drivers for CC to the new EXTI system and SPI calls 2012-01-24 09:23:12 -06:00
James Cotton
a20d654744 Update the attitude algorithm for CC to use the Gyros and Accels UAVObjects 
instead of AttitudeRaw
 2012-01-24 09:23:12 -06:00
James Cotton
d864b481a1 Fix a few more merge conflicts 2012-01-23 04:47:35 -06:00
Stacey Sheldon
6bb4f0c61d leds: use boot-time config for PiOS LED layer 
LEDs are now configured based on a board-specific initialization
in PIOS_BOARD_Init().

LEDs are now named:
  PIOS_LED_HEARTBEAT
  PIOS_LED_ALARM
 2012-01-22 18:22:59 -05:00
James Cotton
bb0bfe0ae4 Merge branch 'next' into revolution3 
Conflicts:
	flight/Bootloaders/CopterControl/Makefile
	flight/Bootloaders/PipXtreme/Makefile
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/CopterControl/Makefile
	flight/INS/inc/pios_config.h
	flight/Libraries/taskmonitor.c
	flight/Modules/Altitude/altitude.c
	flight/Modules/Attitude/attitude.c
	flight/OpenPilot/Makefile
	flight/OpenPilot/Makefile.posix
	flight/OpenPilot/System/inc/pios_usb_board_data.h
	flight/OpenPilot/System/inc/taskmonitor.h
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/System/taskmonitor.c
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_bmp085.c
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/PiOS/pios.h
	flight/Revolution/System/inc/pios_config.h
	flight/Revolution/System/inc/taskmonitor.h
	flight/Revolution/System/taskmonitor.c
	ground/openpilotgcs/src/plugins/serialconnection/serialplugin.cpp
	shared/uavobjectdefinition/systemalarms.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-01-21 11:27:03 -06:00
James Cotton
f8e59443b8 If the BMA180 isn't read when an IRQ fires (because the flash chip has claimed 
the bus) then it won't fire another interrupt until read.  For now this is
dealt with in the sensor loop by forcing a read when the fifo is empty.
 2012-01-21 10:13:46 -06:00
James Cotton
6d72678086 Add timeout in the sensor task for reading sensors to stop the watchdog firing. 
All sensors should later be converted to use FreeRTOS queues.
 2012-01-21 08:32:41 -06:00
Stacey Sheldon
64202ce092 Merge remote-tracking branch 'origin/stac/i2c_decoupling' into next 2012-01-17 22:35:36 -05:00
Stacey Sheldon
ad141c908a Merge remote-tracking branch 'origin/stac/usb-composite-device-v2' into next 2012-01-17 22:26:38 -05:00
James Cotton
ce2d0fcbb1 L3GD20 data now running through IRQ -> FIFO 2012-01-17 19:36:32 -06:00
James Cotton
35025303cd Getting data from gyro. 2012-01-17 19:29:38 -06:00
Stacey Sheldon
b05697c2cf taskinfo: ensure usage of TaskInfo uavo is covered by DIAG_TASKS 
OpenPilot platform (and thus sim too) was missed when the
DIAG_TASKS macro was broken out from the DIAGNOSTICS macro.

This allowed accesses to the TaskInfo UAVO even though it hadn't
been initialized.
 2012-01-15 18:16:50 -05:00
Stacey Sheldon
0575b45378 usb: make USB usage depend on PiOS config 
USB is not supported on sim platforms.  Let PiOS
config determine when we use it.
 2012-01-15 18:16:49 -05:00
Stacey Sheldon
c97b108a1f bootfault: make IAP usage depend on PiOS config 
The sim platforms don't support an IAP mechanism.  Let
PiOS config control when we try to use it.
 2012-01-15 18:16:49 -05:00
Oleg Semyonov
912bea559f Add stick deadband option for Roll/Pitch/Yaw inputs to firmware 2012-01-15 21:13:22 +02:00
Stacey Sheldon
27ceb7ea92 modules: Allow optional modules to be used as built-in 
Some modules are written such that they can be included
or excluded at runtime.  These are added to the OPTMODULES
list in the makefile for a given board.

This change provides a mechanism to allow a build to force
a given module to be built-in (ie. always initialized)
regardless of the configuration in hwsettings.

The main use case for this is to handle a module being optional
on one platform but essential on another.

All modules added to the MODULES list in the Makefile will
automatically result in a matching #define in the form
  MODULE_TheModuleName_BUILTIN
being defined in the CFLAGS for all compiled source.

Note that the capitalization of TheModuleName must match
exactly the capitalization used in the MODULES list.
 2012-01-14 16:55:55 -05:00
Stacey Sheldon
53e9ef06b4 altitude: add optional altitude module 2012-01-14 15:38:56 -05:00
Stacey Sheldon
717c1311e6 altitude: allow altitude to be an optional module 2012-01-14 15:38:56 -05:00
Stacey Sheldon
4cb0c41338 bmp085: only use eoc and drdy gpios when available 
When the bmp085 chip is on an external board, we don't
have access to the eoc and drdy gpio lines.  Only use
them when available.
 2012-01-14 15:38:56 -05:00
James Cotton
cc47520baa Checking ID on ST gyro works 2012-01-04 23:23:42 -06:00
James Cotton
0fbcf7723d Code to disable all gyros. All modules now running. 2012-01-04 22:37:15 -06:00
James Cotton
5ee9c8008e Temporarily swap serial ports while debugging 2012-01-04 22:19:13 -06:00
James Cotton
0cc18e7dcf Add files for new L3DG20 sensor 2012-01-04 20:33:54 -06:00
James Cotton
d2ce7761c5 Add derivative term 2012-01-03 12:37:18 -06:00
Stacey Sheldon
025ed0f43c Merge remote-tracking branch 'origin/stac/usb-composite-device-v2' into next 
Conflicts:
	HISTORY.txt
 2012-01-03 00:02:45 -05:00
Stacey Sheldon
8d8715c8c1 copyright: add/correct GPL + copyright boilerplate 
I missed some of the boilerplate text on some of the
new files I've added recently.  Fixed.
 2012-01-02 23:28:53 -05:00
Stacey Sheldon
b94f4b49a4 usb: major refactoring of USB descriptors, CDC and HID 
Summary of changes:
 * USB CDC and HID drivers are completely split apart.
   * This will allow different max buffer sizes for HID and CDC.
 * USB descriptors have been overhauled:
   * Proper structs/macros/enums declared for USB (see pios_usb_defs.h)
   * Two common descriptor definitions.  One for HID+CDC another for HID only.
     See pios_usb_desc_{hid_cdc,hid_only}.c for details.
   * Long standing bugs in OP USB descriptors became much more obvious with the
     new struct definitions.
   * Board specific USB initialization is now in pios_usb_board_data.h in each build target.
   * Definition of USB descriptors is now entirely indpendent of STM32 libs.
     Glue into STM32 libs is provided by pios_usbhook.c.
 * Removed a lot of stale/irrelevant USB #defines throughout the tree.
 * Improved naming consistency throughout USB code:
   * PIOS_USB_HID_* now refers to the HID endpoint code.
   * PIOS_USB_CDC_* now refers to the CDC endpoint code.
   * PIOS_USB_* now refers to the low-level USB code.
   * PIOS_USB_BOARD_* now refers to board-specific USB data
   * PIOS_USBHOOK_* is glue between PIOS and STM32 USB libs.
   * struct usb_* and enum usb_* and USB_* and HID_* are all types from the USB spec.
 * Shrunk the buffer size on the CDC call mgmt endpoint to save some RAM.
 * Made a few more USB related variables static to save some RAM.
 2012-01-02 14:27:06 -05:00
Oleg Semyonov
77a459af5c Merge remote branch 'origin/next' into os/TxPID-module 2012-01-02 14:49:54 +02:00
Oleg Semyonov
b01e332e03 CameraStab: rename UAVO field 2012-01-02 14:27:05 +02:00
Oleg Semyonov
65abb8f819 CameraStab: small optimization, freed 8 more heap bytes 2012-01-02 14:27:00 +02:00
Oleg Semyonov
406cff296d CameraStab: bypass LPF calculation if ResponseTime is zero 2012-01-02 14:26:58 +02:00
Oleg Semyonov
e11904c42f CameraStab: change ResponseTime type from float to int16 2012-01-02 14:26:56 +02:00
Oleg Semyonov
2eb5130a7c CameraStab: new camera stabilization mode and low-pass stick input filtering 
This patch is based on work of Crubier (LPF) and Cossacs (AxisLock mode).
I've just reworked it a bit by adding a dynamic memory allocation for
static module data.
 2012-01-02 14:26:54 +02:00
James Cotton
ef05cafaca Merge branch 'revolution' into altitudehold 
Conflicts:
	flight/Libraries/insgps13state.c
	flight/OpenPilot/Makefile
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
 2012-01-01 10:50:35 -06:00
Stacey Sheldon
5c0921e92c fault: add optional fault insertion module 
This module and its associated settings uavo can be used
to test various fault conditions during initialization.

To enable the module, add the TEST_FAULTS=YES to your make
command line:
  make fw_coptercontrol TEST_FAULTS=YES

Once this module is part of your firmware load, you can
enable it in the hwsettings uavo and then select the
type of fault to insert by editing the faultsettings uavo.
On the next reset, the configured fault will be inserted
into the init sequence to allow you to test the boot fault
recovery code.

With a fault inserted, you should see 3 failed boot attempts
followed by a successful (recovery) boot.  You will see the
BootFault alarm set to Critical, and the RAM version of your
hwsettings will be reset to defaults.  Since the defaults have
all optional modules disabled, the fault module will be out of
the way during the recovery boot.

You can then "Load" the flash version of the hwsettings uavo
in the object browser, disable the Fault module and then "Save"
the hwsettings module back to the board.  The next reset will
boot normally without the fault inserted.
 2011-12-30 23:05:39 -05:00
Stacey Sheldon
f886af186d bootfault: add support for recovery from init failures 
After 3 failed warm start attempts, the init sequence
will force the RAM version of the HWSettings object
to its defaults.  This should allow a user to regain
connectivity to a board that is continually faulting
during init.

This is accomplished by:
 - Incrementing a boot counter that is stored in the
   STM32 BKP registers.  These registers survive a
   warm start but are cleared on a cold start (ie. powerup).
 - On multiple failures, force hwsettings to defaults
   and raise the (new) BootFault alarm to prevent arming.
 - Resetting the boot counter whenever the system manages
   to successfully run the System Module task.

NOTE: This does not actually change the hwsettings object in
      flash.  That's up to the user.

This is intended to catch ONLY faults during early initialization.
It should not be used to recover from faults after the application
is up and running.
 2011-12-30 23:05:38 -05:00
Stacey Sheldon
1543a6dbd3 hwsettings: allow disabling of USB telemetry entirely 
The GCS hwsettings config widget now disallows any
configuration that disables both HID and VCP telemetry
over the USB port.

The firmware will allow it if the UAVObj is set manually.

This allows a mechanism to reduce RAM usage by another
500 more bytes if USB telemetry can be sacrificed in
certain configurations.
 2011-12-30 23:05:38 -05:00
Stacey Sheldon
7c03875013 diag-tasks: make taskinfo diagnostics a separate enable 
This allows task stack analysis without turning on all
of the other diagnostics.
 2011-12-30 23:05:37 -05:00
Stacey Sheldon
ab135aa00b com-bridge: Make com-bridge an optional (and configurable) module 2011-12-30 23:05:36 -05:00
Stacey Sheldon
785a7ccd88 uavtalk: convert tx to use blocking send routines 
The uavtalk layer was previously implementing a poor
version of packet fragmentation based on a hard-coded
max packet size.  Since this was hard-coded, there was
no guarantee that it would match the underlying devices.

Now that the COM layer sending routines support fragmentation,
remove fragmentation and use the COM layer directly.

This will support future buffer size reductions in the COM
layer.
 2011-12-30 23:05:36 -05:00
Stacey Sheldon
a68f5a4fc9 com-bridge: detect lost characters on transmit 2011-12-30 23:05:36 -05:00
Stacey Sheldon
64f498e48a com-bridge: add usart to usb vcp bridge 2011-12-30 23:05:34 -05:00
Stacey Sheldon
eebdda6276 usb cdc: make HID/CDC configurable in hwsettings 2011-12-30 23:05:34 -05:00
Stacey Sheldon
617a30c07c usb cdc: attach telemetry to CDC rather than HID 2011-12-30 23:05:34 -05:00
Stacey Sheldon
c0259dc616 usb cdc: USB composite device with HID + VCP 2011-12-30 23:05:33 -05:00
James Cotton
25dfb5463e Add option to switch to using the MPU6000 accel instead of BMA180. Disabled by 
default.
 2011-12-29 02:08:13 -06:00
James Cotton
bf98630851 Add streaming the sensor data out of the serial port 2011-12-26 17:52:45 -06:00
James Cotton
9bf06bbd3e Force the loading of the sensor gains and biases at the beginning 2011-12-24 16:14:28 -06:00
James Cotton
1092ac3184 Use the scale and bias terms for hte mag and accel 2011-12-24 15:58:12 -06:00
James Cotton
5d4da2213f Accidentally used floating point when parsing NEMA. Lost resolution on 
position.
 2011-12-24 10:37:30 -06:00
Oleg Semyonov
7fbbb0e6af Merge remote branch 'origin/next' into os/TxPID-module 2011-12-24 15:44:16 +02:00
Oleg Semyonov
495a8f2836 TxPID: initialize the AccessoryDesired object before use its handle 
Also save few bytes of static RAM and add PIOS_Assert(0) for unhandled cases.
 2011-12-24 15:37:14 +02:00
James Cotton
0b00e748a9 OP-565: Added the ability to do a trim flight to compute the accels for level flight 2011-12-21 15:25:00 -06:00
James Cotton
dd89d232ba Add a magnetometer bias term although currently hardcoded to my board 2011-12-15 00:57:19 -06:00
James Cotton
0432dd450e Enable the mag to be used in the complimentary filter to stabilize the yaw 
direction
 2011-12-15 00:56:50 -06:00
James Cotton
2240ad924a Fix the orientation of the magnetometer 2011-12-15 00:46:43 -06:00
James Cotton
43ed6cd89c Need to initialize the HomeLocation object 2011-12-14 14:08:03 -06:00
James Cotton
9148bb2c65 Make sure the sensors module grabs the sesor biases initially. 2011-12-14 10:38:43 -06:00
James Cotton
09864a8cf6 Get outdoor EKF running although need to add in the ability to swap modes 
(probably).
 2011-12-14 02:07:33 -06:00
James Cotton
fd8899018f Get EKF running 2011-12-14 01:54:06 -06:00
James Cotton
ed7cbd5a6c Have to initialize the BaroAltitude object ini the init section for it to show 
up on telemetry
 2011-12-13 23:27:26 -06:00
James Cotton
a37a17a4fb Created a separate Sensor module and Attitude module for revolution 2011-12-12 21:40:39 -06:00
James Cotton
53cb5b67d1 Make the revo attitude now use the separate gyro object. CopterControl 
attitude still needs an update.
 2011-12-12 13:28:35 -06:00
James Cotton
d22e0e66dd Create separate UAVOs for the sensors. 2011-12-12 13:05:40 -06:00
James Cotton
7273f87f9b Fix NMEA parsing for M4 FPU 2011-12-12 09:47:11 -06:00
James Cotton
a9c61845af Create a separate task for sensors and attitude on revo. 2011-12-12 00:47:16 -06:00
James Cotton
33a12d829e Merge branch 'next' into revolution 
Conflicts:
	flight/PiOS/Common/pios_flashfs_objlist.c
 2011-12-11 22:55:54 -06:00
Corvus Corax
a0cd71abe6 UAVObjects ; Modules/ManualControl: Fixed metadata interface and segfault when retrieving it 2011-11-30 09:20:46 +01:00
James Cotton
44ca9736df Fix floating point calculation in NMEA parser and delete duplicate of NMEA 
functions
 2011-11-28 09:36:31 -06:00
James Cotton
43fa9e702e Move DSM to Flexiport and enable GPS on GPS port. Currently GPS module locks 
up though.
 2011-11-28 09:11:13 -06:00
James Cotton
c33816dd79 Force mode switch to be floating point so F4 works 2011-11-28 09:10:26 -06:00
James Cotton
57e7126979 Increase stack size for manualcontrol. This might need to be applied to main 
code.
 2011-11-27 01:51:23 -06:00
James Cotton
f7d13ebd57 Hack to tweak the gyro gain for now although its too far out at the moment so 
something isn't configured properly.  Possibly it is staying in 250 deg/s mode.
Also make sure if the MPU6000 fifo backs up to pull extra data.
 2011-11-27 01:22:37 -06:00
James Cotton
8bbc767a4e Get the pressure sensor working and reading into Revolution 2011-11-27 00:52:09 -06:00
James Cotton
cd65df013e Merge branch 'next' into revolution 
Conflicts:
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-11-26 22:52:32 -06:00
James Cotton
b11a4f7405 Clean up the actuator module for floating point usage. Also there was a bug I 
don't understand where the channels should be scaled AFTER all of them are
computed.  It feels like a memory overwriting bug and needs followup.
 2011-11-26 16:12:32 -06:00
James Cotton
07e3ad10af Force some floating point units to be safe 2011-11-26 15:52:25 -06:00
James Cotton
8c0db424fa Fix long subtle bug where failsafe didn't show the output values it was using 2011-11-26 15:51:24 -06:00
James Cotton
c70a9a5381 Sanitize the floating point math in systemmod.c to be consistently floating and 
not double
 2011-11-26 15:16:16 -06:00
James Cotton
8b7aca0dcd Include the accel bias into revolution attitude function and also make sure 
downsampling is correct.
 2011-11-26 14:40:32 -06:00
James Cotton
7637e9f669 Get flash chip working and saving to memory. Also get the I2C working with 
BMA180 driver.
 2011-11-19 00:13:02 -06:00
James Cotton
a7ef5601e0 Update the MPU6000 FIFO code and also fix the temperature code 2011-11-18 00:24:55 -06:00
James Cotton
6d74e96c31 Got attitude working again. MPU6000 FIFO reading needs a bit of work. 2011-11-18 00:00:55 -06:00
James Cotton
0efffef1fa Work on bringing the Revolution board up 2011-11-17 10:13:34 -06:00
James Cotton
1deb799b6f Get simple attitude estimation working on F4 INS. Also make MPU6050 return 
scaling that casts to degrees.
 2011-11-16 11:36:04 -06:00
James Cotton
aeb42332d6 Get the MPU6050 fifo running and read by the attitude module 2011-11-14 11:23:14 -06:00
James Cotton
59507249e1 Hack in attitude to read directly from gyros instead of fifo. All sensors 
reading now.
 2011-11-14 11:12:10 -06:00
James Cotton
2cc2e55248 Add attitude solution for revo 2011-11-14 10:49:37 -06:00
James Cotton
684715930a Merge branch 'next' into revolution 
Conflicts:
	flight/OpenPilot/Makefile
	flight/Revolution/System/inc/openpilot.h
 2011-11-14 10:11:53 -06:00
Oleg Semyonov
4a99ec3298 code style: move variable into function and free 1 byte of RAM :-) 
component     free heap used
    ----------------------------
    Nothing            2560    -
    PWM                2432  128
    PPM                2408  152
    DSM                2464   96
    S.Bus              2448  112
    GPS (port only)    2368  192
    GPS (port+module)  1312 1248
    CameraStab         2096  464
    Telemetry          1928  632
 2011-11-13 18:27:52 +02:00
Oleg Semyonov
de6e450b5f Merge branch 'next' into os/TxPID-module 
Conflicts:
	flight/CopterControl/Makefile
	flight/CopterControl/System/coptercontrol.c
	ground/uavobjgenerator/generators/generator_common.h
	shared/uavobjectdefinition/hwsettings.xml

component    	free heap used
----------------------------
Nothing            2544    -
PWM                2416  128
PPM                2392  152
DSM                2448   96
S.Bus              2432  112
GPS (port only)    2352  192
GPS (port+module)  1296 1248
CameraStab         2080  464
Telemetry          1912  632
TxPID              2272  272
 2011-11-13 16:25:58 +02:00
James Cotton
b110e9c549 Style suggestions to cleanup GPS from Stac 2011-11-12 21:31:01 -06:00
Corvus Corax
aa69027cb2 Merge branch 'next' into CC_GPS 2011-11-11 11:44:11 +01:00
Corvus Corax
61ecc0d310 make optional modules check themselves if they should start or not 2011-11-11 11:39:57 +01:00
Corvus Corax
e03e3c2ed8 removed "special code" to start optional modules 2011-11-11 11:22:54 +01:00
Corvus Corax
9679638244 Revert "Modules/GPS: removed comment line" 
This reverts commit 109a58ef30.
 2011-11-11 11:07:02 +01:00
Oleg Semyonov
8f77d07119 System Module: fix stupid out of memory detection bug 2011-11-07 19:14:55 +02:00
Oleg Semyonov
a8b36ddd28 HwSettings: disable GPS and telemetry port speed updates at run-time 
This is to be consistent across the HwSettings object fields which are
read on boot only by convention.
 2011-10-31 23:04:17 +02:00
Oleg Semyonov
0116e6a007 spektrum: rework DSM2/DSMJ/DSMX driver for explicit DSMX resolution support 
- both CC serial ports are now disabled by default (no telemetry);
- serial ports now have DSM2, DSMX (10bit) and DSMX (11bit) options;
- ReceiverGroups now have DSM (MainPort) and DSM (FlexiPort) options.

For DSM2 protocol there is an explicit resolution bit in the stream, so
the DSM2 should be selected. For DSMX there is no such bit, and user
should choose the resolution from the list configuring the spektrum port.
ReceiverGroups have single DSM option which is handled by the same driver.

Downside: this implementation saves received frame first, unrolls by the
end of frame. This should be ok, but may be improved by unrolling channels
on the fly in the rx callback.

Another minor difference is that a ChannelGroup is now bound to port:
DSM (MainPort) or DSM (FlexiPort). This was considered as acceptable
solution in order to not have 6 DSM options for each ChannelGroup and
even more in case of new DSM protocol variations.

Known problem: it is not possible to choose same protocols like
DSM2/DSM2 for two ports. It can be enabled by adding an exception to
common rule, though.

The DSMX throttle channel misbehavior (zero value) is not treated
specially yet. It should trigger the failsafe being out of bounds.
More info and data dumps are required to handle this properly.
 2011-10-30 19:29:03 +02:00
James Cotton
0f8ae1e076 Merge branch 'next' into ins 
Conflicts:
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-10-26 13:18:44 -05:00
Oleg Semyonov
6a9208e8c3 Merge branch 'next' into os/TxPID-module 2011-10-22 23:34:58 +03:00
Oleg Semyonov
f71361ca83 Merge branch 'next' into os/GPS-on-CopterControl_next_v2 
Conflicts:
	flight/Modules/System/systemmod.c
 2011-10-22 23:00:47 +03:00
Corvus Corax
cb8d9c791c PiOS.posix: fixed missing defines in pios_config. removed platform specific inclde from Systemmod (pios_config.h gets included from pios.h) 2011-10-19 22:28:39 +02:00
Corvus Corax
b00751af91 Systemmod bugfix: UAVObject used without Initialization 2011-10-19 22:28:08 +02:00
Corvus Corax
425bc5abbe PiOS.posix: PIOS_RCVR : fix posix port of pios_rcvr to allow compilation on 64bit systems 2011-10-11 18:07:04 +02:00
Oleg Semyonov
7800fbe6de gps: initialize GPS UAVO and start GPS module only if port is configured 2011-09-29 00:41:51 +03:00
Oleg Semyonov
a38c569cd0 HwSettings: move Telemetry and add GPS port speed to the HwSettings object 
TelemetrySettings object removed (saved 200+ bytes of RAM). Telemetry
port speed moved to the HwSettings object. Added GPS port speed setting.
GCS code updated to reflect changes and support both fields.
 2011-09-28 22:11:42 +03:00
Oleg Semyonov
53c098dd08 Merge branch 'next' into os/GPS-on-CopterControl_next_v2 
Conflicts:
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	shared/uavobjectdefinition/hwsettings.xml
 2011-09-28 22:02:02 +03:00
Oleg Semyonov
a9137e9db1 TxPID: add update mode option as a workaround for GCS interaction 2011-09-19 16:16:28 +03:00
Oleg Semyonov
aad263bdd8 TxPID: enable ramp-shaped throttle-dependent PIDs 
Besides of knob PID tuning it is now possible to use throttle channel
to ramp-shape PID coefficients. This can be used to lower some PIDs on
VTOL while sinking to prevent wobble.

To use the feature select throttle as control input, choose throttle
range max and min values, assign the instance to particular PID
coefficient and define a range for it. When throttle is lower than
defined throttle range min value (or higher than max), then min and max
PID values will be used accordingly. Changing throttle from throttle
min to max will linearly scale PID value.

Note that it is possible to set MinPID > MaxPID. In that case increasing
control input value will decrease the PID coefficient.

Up to 3 independent instances can be configured. The number can be
increased changing the UAVO definition, but at the cost of extra RAM.
 2011-09-18 14:38:50 +03:00
Oleg Semyonov
d923117c25 TxPID: optional module to tune PID settings using R/C transmitter 
This module will periodically update values of stabilization PID settings
depending on configured input control channels. New values of stabilization
settings are not saved to flash, but updated in RAM. It is expected that the
module will be enabled only for tuning. When desired values are found, they
can be read via GCS and saved permanently. Then this module should be
disabled again.
 2011-09-17 22:49:51 +03:00
James Cotton
06190d1d95 Fix altitude hold dead band range 2011-09-13 10:34:56 -05:00
James Cotton
1783817b96 INS: First pass at altitude hold code 2011-09-13 01:44:53 -05:00
James Cotton
400ba3bd47 Merge branch 'next' into ins 2011-09-12 18:57:11 -05:00
James Cotton
c36297227d Stabilization fix typo 2011-09-12 11:56:01 -05:00
James Cotton
63bb80649b Merge branch 'max_rate_for_attitude' into next 2011-09-12 11:51:03 -05:00
James Cotton
5b836db54c INS/Guidance: Convert distance to using m instead of cm. This is mainly to be 
able to use NAN to indicate when values aren't valid from INS.
 2011-09-11 23:02:05 -05:00
James Cotton
8f2fad6918 Fix for merging with the collective channel with the swashplate fix. 2011-09-11 18:53:10 -05:00
James Cotton
6457276438 Merge branch 'input_configuration' into next 2011-09-11 18:52:35 -05:00
James Cotton
b38081bb1b Stabilization: When in none mode zero the integral accumulators for rate and 
attitude loops.  When not using outer loop zero that accumulator.
 2011-09-11 16:33:38 -05:00
James Cotton
6945f17eba Make the StabilizationSettings.MaxRate field only apply to the stabilized 
modes.  That way ManualRate can exceed MaxRate.
 2011-09-11 12:27:17 -05:00
James Cotton
b8bb2dd2ca Merge branch 'next' into ins 2011-09-10 17:02:15 -05:00
James Cotton
f725fbe128 CopterControl: Fix build due to changing the AttitudeRaw structure. 2011-09-10 13:56:00 -05:00
James Cotton
199db1362d Actuator: Found a bug in actuator that affects how throttle and pitch curves 
were used.  Basically 80% was always 100%.  This should make hovering better
and fix heli swash pitch.
 2011-09-09 19:40:58 -05:00
James Cotton
3239fdf21b Merge branch 'next' into ins 
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-09-09 08:33:34 -05:00
James Cotton
dfe91af686 UAVObjects: Space allocated in manualcontrolcommand did not match the number of 
channels in settings.  Fixed this and added assertion to catch in future.
 2011-09-09 01:17:13 -05:00
James Cotton
1a5fd9f30e Heli: Added an explicit collective channel. Also make the default channel 
number 0 since that is not invalid.
 2011-09-07 01:48:39 -05:00
James Cotton
72625d9971 PiOS RCVR: Make the public API use a 1 based indexing for channel numbers. 
This may or may not get into next, but if so anyone following it MUST
reconfigure their inputs.
 2011-09-06 16:39:08 -05:00
James Cotton
8f7712435f Merge branch 'safer_failsafe' into next 2011-09-06 16:23:11 -05:00
James Cotton
627c931c79 PiOS I2C: Swap the convention of returned values for I2C 2011-09-06 03:27:20 -05:00
James Cotton
7ff5cd7655 INS: Try and get load down on event system. 2011-09-04 16:21:04 -05:00
James Cotton
b1e0366525 Merge remote-tracking branch 'origin/CorvusCorax_unidirectional-GPS-com' into next 
Conflicts:
	flight/OpenPilot/System/pios_board.c
 2011-09-04 13:33:52 -05:00
James Cotton
510a1760ca When disconnected set any accessory channels to neutral. Otherwise the 
actuator module could keep the pitch at high.  However the "right" thing to do
seems very specific.  For example negative pitch is probably preferable.
 2011-09-04 03:45:36 -05:00
James Cotton
89e640ae7f Make sure all receiver drivers return correct constants for invalid channels. 2011-09-04 01:24:16 -05:00
James Cotton
20de046292 Force system to be disarmed when a bad configuration is present 2011-09-04 00:43:33 -05:00
James Cotton
d3de8ff0ef OP-559: Process the arm status when disconnect and allow it to timeout and 
disarm
 2011-09-03 23:57:51 -05:00
James Cotton
697dbf4f5f OP-568 PIOS_RCVR: Standardize the values that are returned from the PIOS_RCVR and make 
them symbolic constants.
- A timeout is 0
- A missing driver is 65534
- An invalid channel is 65535

ManualControl: Make it deal with the values explicitly.  A timed out value
should not be treated like a minimum duration signal.  Instead it does not
updated the scaled value but marks the data window as invalid to trigger the
failsafe.
 2011-09-03 23:50:56 -05:00
James Cotton
3b20df22d1 Updates to config gadget for new INS objects 
Make scope gadget check if object exists before using it.  Avoids segfaults
when scoped objects disappear.
 2011-09-01 12:21:37 -05:00
James Cotton
612d3336b4 This patch breaks backward compatibility with AHRS solidly. 
Move the configuration files for INS from AHRS* to INS*.  Strip out unused
fields in settings and merge calibration and settings since settings has
basically no information.
 2011-09-01 12:21:33 -05:00
Stacey Sheldon
a72c657e21 rcvr activity: Speed up activity acquisition 
Activity detection logic can now move through
the active receivers more quickly.
 2011-08-27 20:17:56 -04:00
James Cotton
6514fd95c7 Also initialize the ReceiverActivity object in manual control 2011-08-27 16:08:57 -05:00
James Cotton
dc340596f5 Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG 
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	flight/PiOS/STM32F10x/pios_spektrum.c
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configgadget.qrc
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	shared/uavobjectdefinition/hwsettings.xml
 2011-08-27 15:26:05 -05:00
James Cotton
1d77d77832 Merge branch 'stac/use-malloc-failed-hook' into next 2011-08-27 00:24:13 -05:00
Corvus Corax
658ae3f809 Modules/System: removed comment line 2011-08-25 16:26:46 +02:00
Corvus Corax
109a58ef30 Modules/GPS: removed comment line 2011-08-25 16:25:19 +02:00
Corvus Corax
8173c7b7c6 Refactor GPS_PURISTIC into GPS_MINIMAL 2011-08-25 15:44:49 +02:00
Corvus Corax
1d797bf004 Fixed error introduced by merge 2011-08-25 15:40:45 +02:00
Corvus Corax
4bd72923e5 Merge branch 'CorvusCorax_unidirectional-GPS-com' into CC_GPS 
Conflicts:
	flight/Modules/GPS/GPS.c
	flight/Modules/GPS/GTOP_BIN.c
	flight/Modules/GPS/NMEA.c
	shared/uavobjectdefinition/hwsettings.xml
 2011-08-25 15:33:23 +02:00
Corvus Corax
54ecf233f3 Modules/PS: typo fix 2011-08-25 15:13:50 +02:00
Corvus Corax
7e396efbbf Modules/GPS: Assert buffer creation 2011-08-25 15:11:29 +02:00
Corvus Corax
dfdea16065 Modules/GPS: Make GPS COM unidirectional (rx only) and use smaller, runtime allocated heap buffers 2011-08-25 14:46:30 +02:00
Corvus Corax
697ac6067e OP-567 Modules/GPS: Block in PIOS_COM, not in TaskDelay - or we will miss updates! 2011-08-25 13:33:41 +02:00
Stacey Sheldon
edc0caf521 heap: set memory critical alarm on malloc failures 
Activate the FreeRTOS malloc failed hook and use it
to set the memory critical alarm.
 2011-08-21 23:14:32 -04:00
Corvus Corax
838149b53f GPS: homelocation init is optional, satellites must be initialized 2011-08-21 18:20:33 +02:00
James Cotton
b1c522def3 Merge remote-tracking branch 'origin/next' into ins 2011-08-21 01:34:40 -05:00
James Cotton
e1afc9a19a Merge branch 'next' into ins 
Conflicts:
	flight/Libraries/inc/fifo_buffer.h
	flight/PiOS/STM32F10x/link_STM3210E_INS_sections.ld
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-08-21 00:47:43 -05:00
James Cotton
368323fd59 Merge remote-tracking branch 'origin/james/erase_settings' into next 2011-08-20 13:07:01 -05:00
Corvus Corax
1ad65e0718 Fixed include in sysstemmod. pios_config.h should not be included explicitly. 2011-08-20 15:04:00 +02:00
Corvus Corax
53d0732fc6 Enable GPS module as "optional module" in CooterControl 2011-08-20 01:25:49 +02:00
Corvus Corax
dfd301571a HWSettings: Allow late Initialization and Start of Modules as defined in Makefile(available modules) and UAVObject(actually started modules) 2011-08-20 01:24:06 +02:00
Corvus Corax
b75890fcd4 Merge branch 'next' into CC_GPS 2011-08-19 21:34:38 +02:00
Corvus Corax
9bba1f7ae9 Posix: fix object initialization where necessary 2011-08-19 18:36:30 +02:00
James Cotton
ab7e57ad2b Initialize objects for guidance in the correct place. Init some objects in 
pios_board_posix since AHRSComms not around.
 2011-08-19 09:52:05 -05:00
James Cotton
482bec497b Revert "Fixed modules that didn't initialize used UAVObjects correctly" 
Modules should initialize their settings and the objects they source.  Not just
everything.

This reverts commit 9ad85e9b7b.
 2011-08-19 09:44:38 -05:00
Corvus Corax
9ad85e9b7b Fixed modules that didn't initialize used UAVObjects correctly 2011-08-19 13:20:15 +02:00
Corvus Corax
f86e53bf91 Merge branch 'OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk' into next 
Conflicts:
	flight/Modules/Telemetry/telemetry.c
 2011-08-19 12:10:40 +02:00
Corvus Corax
6fe495c088 Merge remote branch 'origin/next' into OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk 
Conflicts:
	flight/Modules/Telemetry/telemetry.c
 2011-08-17 08:30:32 +02:00
James Cotton
35eef66bfe OP-557: Add a UAVO access method to erase the entire flash chip. Normally not 
needed by users because if too much changes I change the FS magic and trigger a
wipe.

Possibly the erase should require a particular "magic" object id value to
execute?  This would make it harder to do manually through UAVOs though.
 2011-08-15 10:33:27 -05:00
James Cotton
86b652bbab Merge branch 'next' into camera_stabilization 2011-08-14 18:07:57 -05:00
zedamota
e736b17cc4 Merge remote-tracking branch 'remotes/origin/next' into GCS_ChangesToUI-RuntimeCFG 
Conflicts:
	ground/openpilotgcs/src/plugins/config/config_cc_hw_widget.cpp
	ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
	ground/openpilotgcs/src/plugins/config/configstabilizationwidget.cpp
 2011-08-14 15:48:16 +01:00
James Cotton
a2b76adc33 Attitude: Do not start attitude estimation until accel data appears. This 
fixes the NaN when AttitudeSettings not available.
 2011-08-13 18:53:42 -05:00
James Cotton
784c7b2646 Merge branch 'next' into ins 2011-08-11 21:52:10 -05:00
James Cotton
ec4e23aff9 Camera Stabilization: Bound outputs to [-1,1] although this should be redundant 
with checks in actuator.
 2011-08-11 14:34:38 -05:00
James Cotton
bbe3c1533a Merge branch 'next' into camera_stabilization 2011-08-10 21:57:45 -05:00
James Cotton
ab288e95ab Stabilization: Small patch so that by default the integral is zeroed while 
throttle is low (good for quads) but can be disabled (good for planes and also
testing helis).
 2011-08-10 03:51:46 -05:00
James Cotton
f23eaa8273 Make the Actuator pull from the CameraDesired fields 2011-08-09 21:47:42 -05:00
James Cotton
f11aa80444 CameraStabilization: Make the CameraStabilization module put the desired 
position into another object (will help with configuration).
 2011-08-09 20:45:38 -05:00
James Cotton
c4e272b9ad Merge branch 'next' into camera_stabilization 2011-08-09 20:16:45 -05:00
James Cotton
ec2121bca8 Attitude: Keep first element of quaternion positive 2011-08-08 21:16:04 -05:00
James Cotton
0bba13a0e9 Merge branch 'next' into ins 
Conflicts:
	flight/INS/Makefile
	flight/INS/pios_board.c
	flight/Modules/Altitude/altitude.c
	flight/PiOS/Boards/STM3210E_INS.h
	flight/PiOS/STM32F10x/link_STM3210E_INS_BL_sections.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_HD_BL.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_HD_NB.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_memory.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_sections.ld
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-08-06 17:25:56 -05:00