rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
Code Issues Releases Activity
4,331 Commits 5 Branches 8 Tags 266 MiB
4c04d01be4
Commit Graph

2037 Commits

Author SHA1 Message Date
Oleg Semyonov
4ed23dd891 Output Remapping: renamed PPM_SERVO option to PPM+Servo 2011-10-24 00:34:01 +03:00
James Cotton
23150a48fe Merge remote-tracking branch 'origin/os/sbus_dynamic_malloc' into next 2011-10-23 15:26:26 -05:00
James Cotton
24d6ae731b Output Remapping: Added option to just use servo outputs on input lines but not 
PPM.  This saves resources.  Good suggestion Os.  In this configuration we
could allow 12 channels of output but for now I'll leave it capped at 10 to
lessen resources on the mixer table.

With spektrum and camera stab enabled there was
1632 bytes heap remaining
180 bytes irq stack remaining
 2011-10-23 15:21:40 -05:00
Oleg Semyonov
2a98a52f4c gps: include optional GPS module by default 2011-10-23 00:41:18 +03:00
Oleg Semyonov
f71361ca83 Merge branch 'next' into os/GPS-on-CopterControl_next_v2 
Conflicts:
	flight/Modules/System/systemmod.c
 2011-10-22 23:00:47 +03:00
Oleg Semyonov
58d0812309 sbus: better frame syncronization, some cosmetic changes 
In the previous version the decoder could in rare cases get synced from
the middle of data stream in case of data byte equal to the S.Bus start
of frame (SOF) byte (wrong data will be rejected but it was not perfect).
Now it waits for the real start of frame and then checks the SOF byte.
 2011-10-22 00:44:09 +03:00
Oleg Semyonov
62bca651d5 spektrum: alternative DSMx (DSM2/DSMJ/DSMX) driver 
- does not glitch when used in 2-frame mode (DM9, 9503, etc)
- does NOT provides yet DSMX stream decoding - do NOT merge
- uses a bit more time in the interrupt, but frees 16 bytes of RAM.
  This is done to help decoding the weird DSMX stream which does not
  contain explicit resolution/frame/lost frames info and needs special
  processing (to be done yet).
 2011-10-21 23:35:17 +03:00
Corvus Corax
167010e8a0 UAVTalk: Fixed bug in parser failing to handle length of multi-instanceobjects 
UAVTalk (on GCS): Fixed a null pointer dereference when receiving in a NACK
 2011-10-21 02:04:29 +02:00
Oleg Semyonov
92b81e3f88 sbus: refactor the code using unified PIOS RCVR driver structure 
- allow more than one S.Bus receiver (needs hardware support)
- use dynamic memory allocation (frees around 72 bytes of RAM when unused)
 2011-10-20 18:23:23 +03:00
James Cotton
e0cc289de0 Remapping inputs to outputs: Drop S2 so there are ten outputs 
Output 7 = S3 input
Output 8 = S4 input
Output 9 = S5 input
Output 10 = S6 input

Also fix bug that prevented them outputting signal
 2011-10-20 06:28:07 -05:00
Corvus Corax
cb8d9c791c PiOS.posix: fixed missing defines in pios_config. removed platform specific inclde from Systemmod (pios_config.h gets included from pios.h) 2011-10-19 22:28:39 +02:00
Corvus Corax
b00751af91 Systemmod bugfix: UAVObject used without Initialization 2011-10-19 22:28:08 +02:00
Corvus Corax
e244581b18 PiOS.posix: bugfix in pios_udp com driver - data send loop 2011-10-19 13:37:35 +02:00
James Cotton
9312610f3b Output: Enable two more channels to support octo + camera 2011-10-15 16:59:42 -05:00
James Cotton
ce7f424131 CC: When receiver port is set to PPM_SERVO use the spare pins as outputs 2011-10-15 16:59:42 -05:00
James Cotton
19c9528d80 CopterControl: Create structures to supply more output channels 2011-10-15 16:59:42 -05:00
Corvus Corax
425bc5abbe PiOS.posix: PIOS_RCVR : fix posix port of pios_rcvr to allow compilation on 64bit systems 2011-10-11 18:07:04 +02:00
James Cotton
9cbb48417a Merge branch 'long_erase_settings' into next 2011-10-08 14:18:56 -05:00
James Cotton
0f1a6264de Fix jtag programming of bootloader 2011-10-08 14:14:11 -05:00
James Cotton
5dc0f397a6 OP-499 Erase settings bug: Make hte flash chip read a wrong value for 1 second 
before wiping settings.
 2011-10-07 14:08:56 -05:00
Oleg Semyonov
7800fbe6de gps: initialize GPS UAVO and start GPS module only if port is configured 2011-09-29 00:41:51 +03:00
Oleg Semyonov
469feecb13 pios: remove some unused #defines 2011-09-28 23:40:12 +03:00
Oleg Semyonov
ed8cf89888 Initcall: fix compilation errors for firmware which does not use Initcalls 2011-09-28 22:57:18 +03:00
Oleg Semyonov
a38c569cd0 HwSettings: move Telemetry and add GPS port speed to the HwSettings object 
TelemetrySettings object removed (saved 200+ bytes of RAM). Telemetry
port speed moved to the HwSettings object. Added GPS port speed setting.
GCS code updated to reflect changes and support both fields.
 2011-09-28 22:11:42 +03:00
Oleg Semyonov
53c098dd08 Merge branch 'next' into os/GPS-on-CopterControl_next_v2 
Conflicts:
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	shared/uavobjectdefinition/hwsettings.xml
 2011-09-28 22:02:02 +03:00
James Cotton
fef9570e4d INS: Get bootloader working again 2011-09-27 01:17:14 -05:00
James Cotton
cf6a59468f Merge branch 'next' into ins 
Conflicts:
	flight/INS/Makefile
	flight/Project/OpenOCD/stm32f1x.cfg
	flight/Project/OpenOCD/stm32f2x.cfg
	make/firmware-defs.mk
 2011-09-27 01:02:06 -05:00
James Cotton
f1e70d2ff5 Merge remote-tracking branch 'origin/msmith/OP-578' into next 2011-09-23 16:43:00 -05:00
James Cotton
a1aeab9393 Increase size of framing signal for logging 2011-09-15 10:19:59 -05:00
James Cotton
0d3d5ad094 INS: Get rid of old code that tried to detect when indoor mode wasn't called 
for a while
 2011-09-14 17:30:02 -05:00
James Cotton
acf2aa218b Merge remote-tracking branch 'origin/stac/upgrade-to-openocd-0.5.0' into next 2011-09-14 11:49:01 -05:00
Oleg Semyonov
c92870d29e Remove unused file (versionblob.py) 2011-09-13 16:10:10 +03:00
James Cotton
400ba3bd47 Merge branch 'next' into ins 2011-09-12 18:57:11 -05:00
James Cotton
c36297227d Stabilization fix typo 2011-09-12 11:56:01 -05:00
James Cotton
63bb80649b Merge branch 'max_rate_for_attitude' into next 2011-09-12 11:51:03 -05:00
James Cotton
00c9d62f6a INS: Miscellaneous changes for debugging handling and also some stuff for GPS 
signal loss.
 2011-09-12 11:17:17 -05:00
James Cotton
5b836db54c INS/Guidance: Convert distance to using m instead of cm. This is mainly to be 
able to use NAN to indicate when values aren't valid from INS.
 2011-09-11 23:02:05 -05:00
James Cotton
a682d5deb6 INS: In indoor mode if GPS is found use that to populate PositionActual 2011-09-11 22:53:07 -05:00
James Cotton
8f2fad6918 Fix for merging with the collective channel with the swashplate fix. 2011-09-11 18:53:10 -05:00
James Cotton
6457276438 Merge branch 'input_configuration' into next 2011-09-11 18:52:35 -05:00
Oleg Semyonov
f5369f9338 Input Configuration: support all 18 S.Bus input channels 2011-09-12 02:06:50 +03:00
Oleg Semyonov
7b3056d10f Input Configuration: fix S.Bus receiver in multi-receiver code 2011-09-12 02:06:48 +03:00
James Cotton
b38081bb1b Stabilization: When in none mode zero the integral accumulators for rate and 
attitude loops.  When not using outer loop zero that accumulator.
 2011-09-11 16:33:38 -05:00
Mike Smith
deade53c5d OP-578 - check for CODE_SOURCERY before setting -fpromote-loop-indices 2011-09-11 10:49:09 -07:00
James Cotton
6945f17eba Make the StabilizationSettings.MaxRate field only apply to the stabilized 
modes.  That way ManualRate can exceed MaxRate.
 2011-09-11 12:27:17 -05:00
James Cotton
b8bb2dd2ca Merge branch 'next' into ins 2011-09-10 17:02:15 -05:00
James Cotton
aad41ebb4f Merge branch 'mainboard_receiver_fix' into next 2011-09-10 16:01:22 -05:00
James Cotton
01cd2ded57 Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one 
setting that is mutually exclusive.
 2011-09-10 14:20:51 -05:00
James Cotton
4847a04db8 Mainboard: Get PWM working again. Had to add extra timer IRQ handlers for 
TIM5-8.  Also TIM1 was not handled probably (for CC either) as the name of the
IRQ is TIM1_CC and TIM1_UP for the capture compare versus update.  I haven't
checked the downstream code that the registers it uses to map from a context to
event is invariant under timer channel.
 2011-09-10 14:20:40 -05:00
James Cotton
eb191d869a Mainboard: Get spektrum working again. 2011-09-10 14:19:54 -05:00
James Cotton
c2a8cc3faa Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one 
setting that is mutually exclusive.
 2011-09-10 14:19:12 -05:00
James Cotton
f725fbe128 CopterControl: Fix build due to changing the AttitudeRaw structure. 2011-09-10 13:56:00 -05:00
James Cotton
2871c75a79 Mainboard: Get PWM working again. Had to add extra timer IRQ handlers for 
TIM5-8.  Also TIM1 was not handled probably (for CC either) as the name of the
IRQ is TIM1_CC and TIM1_UP for the capture compare versus update.  I haven't
checked the downstream code that the registers it uses to map from a context to
event is invariant under timer channel.
 2011-09-10 13:53:38 -05:00
James Cotton
199db1362d Actuator: Found a bug in actuator that affects how throttle and pitch curves 
were used.  Basically 80% was always 100%.  This should make hovering better
and fix heli swash pitch.
 2011-09-09 19:40:58 -05:00
James Cotton
1d2a424296 Mainboard: Get spektrum working again. 2011-09-09 09:42:13 -05:00
James Cotton
3239fdf21b Merge branch 'next' into ins 
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-09-09 08:33:34 -05:00
James Cotton
dfe91af686 UAVObjects: Space allocated in manualcontrolcommand did not match the number of 
channels in settings.  Fixed this and added assertion to catch in future.
 2011-09-09 01:17:13 -05:00
James Cotton
22821e3c93 HMC5883: Missed a channel for HMC5883 2011-09-08 22:25:35 -05:00
James Cotton
552022250b INS: Disable power up checks until these are made more reliable and remove some 
debugging outputs.
 2011-09-08 21:44:27 -05:00
James Cotton
e79e8cdbde INS data output: Add the latency the logged messages 2011-09-08 03:39:39 -05:00
James Cotton
c87a042195 IMU3000: For now sample at 1k which allows us to bring down the I2C clock rate 
to 400k
 2011-09-08 03:37:51 -05:00
James Cotton
0eb4fd113b PiOS BMA180: Increase the comms speed for BMA180 and perfom SPI without 
callback.  This takes less time.
 2011-09-08 03:28:32 -05:00
James Cotton
d7ea1fc306 PiOS I2C: Swap the expected return value of the F2 pios i2c calls 2011-09-08 01:32:27 -05:00
James Cotton
1a5fd9f30e Heli: Added an explicit collective channel. Also make the default channel 
number 0 since that is not invalid.
 2011-09-07 01:48:39 -05:00
James Cotton
72625d9971 PiOS RCVR: Make the public API use a 1 based indexing for channel numbers. 
This may or may not get into next, but if so anyone following it MUST
reconfigure their inputs.
 2011-09-06 16:39:08 -05:00
James Cotton
8f7712435f Merge branch 'safer_failsafe' into next 2011-09-06 16:23:11 -05:00
James Cotton
627c931c79 PiOS I2C: Swap the convention of returned values for I2C 2011-09-06 03:27:20 -05:00
Sambas
a8ef57c6d6 Redo DX8 changes 2011-09-06 08:40:10 +03:00
Stacey Sheldon
1e9bcf8426 openpilot: fix merge of unidirectional gps feature branch 2011-09-04 23:22:29 -04:00
James Cotton
465527a980 INS: Enable GPS parsing. GPS data is processed on INS now. HomeLocation and 
WMM are not currenly implemented.
 2011-09-04 20:03:04 -05:00
James Cotton
7ff5cd7655 INS: Try and get load down on event system. 2011-09-04 16:21:04 -05:00
James Cotton
cd8ebdf427 INS: Store the gyro bias in the settings so it doesn't get overwritten 2011-09-04 15:21:53 -05:00
James Cotton
b1e0366525 Merge remote-tracking branch 'origin/CorvusCorax_unidirectional-GPS-com' into next 
Conflicts:
	flight/OpenPilot/System/pios_board.c
 2011-09-04 13:33:52 -05:00
James Cotton
82c5f9f0f4 PIOS_RCVR: Document return values better and use enum for them 2011-09-04 12:37:39 -05:00
James Cotton
533ae9bb41 SBUS: Missed handling the S.Bus failsafe. Now returns PIOS_RVCR_TIMEOUT for 
either SBus failsafe mode or when no data for 100 ms.
 2011-09-04 12:15:34 -05:00
James Cotton
5e2a36aa03 Merge branch 'stac/allocate-device-instances-from-heap' into next 2011-09-04 12:03:42 -05:00
James Cotton
c326c0941d INS: Work on initialization. Improve the zeroing of the gyros at powerup. 2011-09-04 11:49:15 -05:00
James Cotton
510a1760ca When disconnected set any accessory channels to neutral. Otherwise the 
actuator module could keep the pitch at high.  However the "right" thing to do
seems very specific.  For example negative pitch is probably preferable.
 2011-09-04 03:45:36 -05:00
James Cotton
89e640ae7f Make sure all receiver drivers return correct constants for invalid channels. 2011-09-04 01:24:16 -05:00
James Cotton
51967ae63f OP-571 PIOS_PWM: Add back the PWM supervisor 2011-09-04 01:17:40 -05:00
James Cotton
20de046292 Force system to be disarmed when a bad configuration is present 2011-09-04 00:43:33 -05:00
James Cotton
d3de8ff0ef OP-559: Process the arm status when disconnect and allow it to timeout and 
disarm
 2011-09-03 23:57:51 -05:00
James Cotton
697dbf4f5f OP-568 PIOS_RCVR: Standardize the values that are returned from the PIOS_RCVR and make 
them symbolic constants.
- A timeout is 0
- A missing driver is 65534
- An invalid channel is 65535

ManualControl: Make it deal with the values explicitly.  A timed out value
should not be treated like a minimum duration signal.  Instead it does not
updated the scaled value but marks the data window as invalid to trigger the
failsafe.
 2011-09-03 23:50:56 -05:00
James Cotton
dae11cf877 INS Logging: Enable temperature reading from gyro and accel (may be removed in 
future), push it into UAVO and introduced a logging mode for INS that outputs
all sensor data from aux port.
 2011-09-03 15:10:47 -05:00
James Cotton
5eaebac8d8 INS: Get the aux uart working. All F2 GPIO pins need to be remapped to work. Good thing to remember. 2011-09-02 17:04:39 -05:00
James Cotton
63f64003e5 INS: Change how the initialization of algorithms is handled to ensure sensor 
dat always good
 2011-09-02 13:50:36 -05:00
James Cotton
c40e5800ab BMA180: Enable the EEPROM writing on startup so settings take the first time. 2011-09-02 13:28:36 -05:00
James Cotton
e0ed82eef0 INS Settings: Use the calibration data on the sensors 2011-09-02 13:28:01 -05:00
James Cotton
1d04715476 INS: Rework how the sensor calibration behaves and clean up the interface a 
bit.
 2011-09-02 13:24:35 -05:00
Mathieu Rondonneau
ae1dd945b1 Fix win32 sim macro problem 
This is to get the macro in pios.win32 in sync with sim posix and
real flight.
 2011-09-01 21:50:13 -04:00
James Cotton
3b20df22d1 Updates to config gadget for new INS objects 
Make scope gadget check if object exists before using it.  Avoids segfaults
when scoped objects disappear.
 2011-09-01 12:21:37 -05:00
James Cotton
612d3336b4 This patch breaks backward compatibility with AHRS solidly. 
Move the configuration files for INS from AHRS* to INS*.  Strip out unused
fields in settings and merge calibration and settings since settings has
basically no information.
 2011-09-01 12:21:33 -05:00
James Cotton
37878ed4e8 Get the OpenPilot compiling again using a previvous pios_board until doing a 
proper merge with next
 2011-09-01 03:31:23 -05:00
Stacey Sheldon
eea011c53b openpilot: fix compile error on OP 2011-09-01 03:31:23 -05:00
Stacey Sheldon
43b31efb76 pios: allocate driver instance data from heap 
Allocate per-instance data for drivers from the heap
rather than as static variables from the .data segment.

This converts > 800 bytes of RAM from being always consumed
as static data into being allocated from the heap only when
a particular feature is enabled in the hwsettings object.

A minimal config (no receivers, flexi port disabled, main port
disabled) leaves 2448 bytes of free heap.  That's our new baseline.

Approximate RAM (heap) costs of enabling various features:
 + 632 Serial Telemetry (includes 400 bytes of Rx/Tx buffers)
 + 108 PWM Rcvr
 + 152 PPM Rcvr
 + 112 Spektrum Rcvr
 + 24  S.Bus (Should be closer to 68 since driver is still using
              static memory)

There are still some drivers that pre-allocate all of their memory
as static data.  It'll take some work to convert those over to
dynamically allocating their instance data.
 2011-08-31 22:35:03 -04:00
Stacey Sheldon
86ce79af1d openpilot: fix compile error on OP 2011-08-31 21:43:57 -04:00
Stacey Sheldon
2f86e4dd4f Make PWM/PPM and Servo drivers play nicely together 
PWM and PPM can now coexist in the same load and be
selected at boot time via the hwsettings UAVObject.

This is basically a complete restructuring of the
way the drivers interact with the TIM peripheral in
the STM32.

As a side effect, the PWM and PPM drivers are now
ready to support multiple instances of each.

This also provides the first step toward being able
to reassign some of the PWM input pins to be servo
output pins.  Still more work required, but this is
a good start.
 2011-08-27 21:39:56 -04:00
Stacey Sheldon
b3c43da90a stdperiph: Make TIM related APIs use const pointers 
This allows the configuration parameters to be stored in
flash instead of copied to RAM.
 2011-08-27 21:39:17 -04:00
Stacey Sheldon
a72c657e21 rcvr activity: Speed up activity acquisition 
Activity detection logic can now move through
the active receivers more quickly.
 2011-08-27 20:17:56 -04:00
James Cotton
6514fd95c7 Also initialize the ReceiverActivity object in manual control 2011-08-27 16:08:57 -05:00