James Cotton
93c44f2a4e
RM2 Temporary patch: Swap the GPIO pins and the VSense pins. This needs to be based on the hardware revision later.
2012-09-26 03:02:25 -05:00
James Cotton
333a96516c
Merge remote-tracking branch 'revo/brian/rfm22_refactor' into rm2
2012-09-26 01:40:23 -05:00
James Cotton
dadc38d82d
Revo Mini 2: Get basic LED working. Board revision is actually 3 since right now it masquerades as Revo.
2012-09-26 01:17:32 -05:00
James Cotton
0fa4b062a4
Merge branch 'next' into revo
2012-09-26 00:43:02 -05:00
Brian Webb
6972c29813
RFM22B: Added check for timeout wating for sync on receive. This virtually eliminates the number of timeouts.
2012-09-25 18:10:15 -07:00
Brian Webb
88be2ddf1e
RFM22B: Added a message timeout event to the RFM22B state machine that will fire if a packet takes too long to transmit / receive.
2012-09-24 20:51:34 -07:00
Brian Webb
a070e1cc3e
RFM22B: Added PIOS_RFM22B_Receive_Packet function and removed rx buffer.
2012-09-23 08:36:38 -07:00
Brian Webb
a46e3cdec3
RFM22B: All outgoing data to the radio is now going through the PIOS_RFM22B_Send_Packet call. Also removed all global variables with the exception of the rx buffer.
2012-09-22 20:13:11 -07:00
Brian Webb
61200f01f5
RFM22B: Major refactoring of te RFM22B driver to implement a state machine for the driver. The state machine should now be complete, and the driver seems to be working pretty well on both the RM and the pipx.
2012-09-22 20:13:10 -07:00
Brian Webb
80509d264e
RFM22B: Start at cleaning up the processing interrupt handling, and starting to make it more of a state machine. Also removed the supervisor, which was causing unnecessary resets. The supervisor functionality is not in the the driver thread.
2012-09-22 20:13:08 -07:00
Brian Webb
057227726b
Radio: Make sure pios_packet_handler is set to 0 when radio module is not initialized.
2012-09-22 20:13:07 -07:00
Brian Webb
8ca2e85f4c
RFM22B: Removed incorrect defaulting of tx power level.
2012-09-22 20:13:05 -07:00
Brian Webb
6623c55846
RFM22B: Moved ISR processing thread into the rfm22b driver.
2012-09-22 20:13:03 -07:00
Brian Webb
432a6dfd00
RM: Fixed crashing when radio module is disabled.
2012-09-22 20:13:02 -07:00
James Cotton
497683e571
Fix OSX simulator
2012-09-18 13:29:11 -05:00
Stacey Sheldon
14123069be
gdb: add gdb config file for CC BU image
2012-09-16 21:13:42 -04:00
Stacey Sheldon
368d57bc92
Merge remote-tracking branch 'origin/lilvinz/OP-300' into next
2012-09-16 16:05:25 -04:00
Stacey Sheldon
05483e2a74
simposix: adapt simposix to addition of relay tuning
2012-09-16 15:40:47 -04:00
lilvinz
718062ed6e
pios_led: added support for active_high connected leds
2012-09-16 18:19:27 +02:00
James Cotton
13e7733e5f
Merge branch 'revo-mini' into revo
2012-09-12 02:30:10 -05:00
James Cotton
223a3473c2
Merge branch 'next' into revo-mini
2012-09-12 02:03:39 -05:00
James Cotton
595083c982
PID: Fix small bug in setpoint weighting that had really ugly consequences
2012-09-12 00:07:17 -05:00
James Cotton
4717c376c0
Stabilization: For the inner loop call the setpoint shaping version so that
...
the derivative term can weight the sticks and gyros independently.
2012-09-11 13:21:53 -05:00
James Cotton
e4a167dca1
PID: Add a pid_apply_setpoint which takes in the setpoint and feedback term
...
This version allows performing setpoint weighting, currently on the derivative
component.
2012-09-11 13:21:19 -05:00
James Cotton
11b099b1ef
Stabilization: Add configuration terms for the derivative calculation to the UAVO and pass
...
them in to the PID system.
2012-09-11 12:29:38 -05:00
James Cotton
42bbd52d68
PID: Add a function to set the cutoff for the derivative term
...
Also contains a term for setting the deriative setpoint in the future
2012-09-11 12:27:41 -05:00
James Cotton
86422b8b9e
VtolPathFollower: Make sure to clear the alarm when running so it doesn't show as
...
uninintialized
2012-09-11 02:34:31 -05:00
James Cotton
88b483f37d
PIOS_MPU6000: Make the driver perform the rotation to bring it into the OP
...
coordinate system
Previously there were hacks spread throughout to deal with various ways of
positioning the chips. Now the driver structure specifies the rotation
of the chip relative to the board layout and the output X/Y/Z are already
in OP convention.
This flag seems to do the right thing for Revolution, CC3D, and RevoMini
2012-09-11 01:46:22 -05:00
James Cotton
4cbaa6df88
Revolution: Misses some files for stabilization refactoring in Revolution
2012-09-11 01:44:40 -05:00
a*morale
cf7aea6499
Support for Led Outputs as actuator channels 9&10.
...
Added the ARMING LED and INFO LED option for actuator channel
2012-09-10 20:14:24 -05:00
a*morale
316e02612e
mapped LED1&2 ports to output 9&10 so that it is possible to use as accessory or pwm buzzer
2012-09-10 20:14:15 -05:00
James Cotton
aaaf23e64c
ManualControl: Cover the case for PathPlanner to avoid setting an alarm. No functional change.
2012-09-10 20:12:58 -05:00
James Cotton
5211176f15
ManualControl: Cover the case for PathPlanner to avoid setting an alarm. No functional change.
2012-09-10 20:12:23 -05:00
James Cotton
38e9d105aa
Merge branch 'pidt1' into test2
...
Conflicts:
flight/Modules/ManualControl/inc/manualcontrol.h
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/flightstatus.xml
shared/uavobjectdefinition/hwsettings.xml
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-10 14:37:52 -05:00
James Cotton
386a9d41ef
Merge branch 'next' into test2
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configrevowidget.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/uavobjects/uavobjecttemplate.m
2012-09-10 14:29:26 -05:00
James Cotton
fa9a616b4c
PID: Add the 20 Hz low pass filter to the derivative term
2012-09-10 03:14:02 -05:00
James Cotton
9763a70364
Merge remote-tracking branch 'origin/igor/pidt1' into relay_tuning
...
Conflicts:
flight/Modules/Stabilization/stabilization.c
2012-09-10 03:10:26 -05:00
Igor Van Airde
8ca99739ed
Changed rate controller from PID to PIDT1 to improve flight stability.
...
Low pass on D-Term makes the D-Term usable to improve flight stability.
Affects rate and stabilize mode.
2012-09-09 13:07:25 +02:00
James Cotton
f3f07682ac
RFM22b radio.c: Increase the stack side for the status task which runs the ISR
2012-09-08 12:43:01 -05:00
James Cotton
527edcbee9
RFM22b: Get rid of the burst read commands and do a block transfer
2012-09-08 12:39:14 -05:00
James Cotton
1f0004e9db
RFM22b: Abstract out the port into the driver initiation
...
Also use a separate function to claim the bus semaphore and
assert the CS line.
2012-09-08 12:38:54 -05:00
Werner Backes
2a4e135c81
Merge branch 'D-Lite/fix_CC3D_yawBias_correction' into next
2012-09-06 13:47:03 +02:00
Werner Backes
4803dfe99c
Fix: yaw bias correction wasn't applied on CC3D.
2012-09-06 13:13:58 +02:00
Stacey Sheldon
97882dbef9
pipx: ensure pipx BL image is padded to fill its bank
...
This padding is required in order to properly align all
of the sections in the EF images.
2012-09-05 22:17:04 -04:00
Stacey Sheldon
803e3c4d1e
ef: Add fwinfo to entireflash (EF) images
...
EF images were missing the firmware info blob that describes
which firmware is installed on the board. The EF image is now
padded out to fill the firmware bank and the info blob is
properly placed at the tail end of the firmware bank.
2012-09-05 21:45:59 -04:00
James Cotton
68fa464ccf
RM: Make the direction of the TX/RX lines come from the configuration file
2012-09-04 23:22:56 -05:00
James Cotton
2f65fc1e8e
Merge branch 'next' into relay_tuning
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-04 10:43:04 -05:00
James Cotton
844d14e2f5
RM (NOT FOR PIPX) Properly select the GPIO->RX/TX mapping
2012-09-04 10:22:04 -05:00
James Cotton
113c3d3b76
RM Telem: Make sure it properly tracks the outgoing rate of bytes
2012-09-04 10:20:51 -05:00
James Cotton
0b947b243d
Revert "RFM22b: More block claims for rfm22_txStart"
...
This reverts commit fa4ca426abf5671fc7d0b7206f85f14bcbf92c3d.
2012-09-02 22:44:58 -05:00
