a*morale
c2910d0ce0
Receiver input working for both PPM/PWM mode for rm2
2012-09-30 20:54:10 +02:00
a*morale
227aa98ebc
Added TIM12 to PIOS_TIM
2012-09-30 20:32:03 +02:00
a*morale
be752b8075
Fixed some declaration to Exti functions to make it compile.
2012-09-30 17:04:36 +02:00
a*morale
504d691487
Fixed declaration of PIOS_L3GD20_IRQHandler.
2012-09-30 15:44:31 +02:00
James Cotton
61f1140645
Merge branch 'revo' into rm2
2012-09-28 01:01:35 -05:00
James Cotton
5c13c31c08
Merge branch 'next' into revo
...
Conflicts:
ground/openpilotgcs/src/libs/utils/homelocationutil.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.h
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/uavobjectutil/uavobjectutilmanager.cpp
2012-09-28 01:00:10 -05:00
James Cotton
8979c00fba
Merge branch 'exti_end_switching_isr' into next
2012-09-28 00:41:08 -05:00
James Cotton
519e3e2e3a
PIOS_EXTI: Make the line task macro now take in the xHigherTaskPriority variable name
2012-09-28 00:40:36 -05:00
James Cotton
f12d5c04fb
Merge remote-tracking branch 'origin/lilvinz/mpu6000_masked_locals_fix' into next
2012-09-27 14:43:54 -05:00
James Cotton
1ba40ee9b0
PIOS_EXTI: Make sure to use pdTRUE instead of true where appropriate.
2012-09-27 14:41:38 -05:00
James Cotton
1721479a12
Fix for vinz' merge to pios_mpu6000 exti changes
2012-09-27 14:34:11 -05:00
James Cotton
a021659b75
Merge remote-tracking branch 'origin/lilvinz/exti_end_switching_isr' into next
2012-09-27 14:31:16 -05:00
James Cotton
303fe17969
Merge remote-tracking branch 'revo/brian/rfm22_refactor' into revo
2012-09-27 14:04:48 -05:00
James Cotton
6e114360f4
Merge branch 'next' into revo
...
Conflicts:
shared/uavobjectdefinition/taskinfo.xml
2012-09-27 14:04:44 -05:00
James Cotton
d2842169ee
Sensors: Need to support MPU6000 for revision 3
2012-09-26 04:04:48 -05:00
James Cotton
93c44f2a4e
RM2 Temporary patch: Swap the GPIO pins and the VSense pins. This needs to be based on the hardware revision later.
2012-09-26 03:02:25 -05:00
James Cotton
333a96516c
Merge remote-tracking branch 'revo/brian/rfm22_refactor' into rm2
2012-09-26 01:40:23 -05:00
James Cotton
dadc38d82d
Revo Mini 2: Get basic LED working. Board revision is actually 3 since right now it masquerades as Revo.
2012-09-26 01:17:32 -05:00
James Cotton
0fa4b062a4
Merge branch 'next' into revo
2012-09-26 00:43:02 -05:00
Brian Webb
6972c29813
RFM22B: Added check for timeout wating for sync on receive. This virtually eliminates the number of timeouts.
2012-09-25 18:10:15 -07:00
Brian Webb
88be2ddf1e
RFM22B: Added a message timeout event to the RFM22B state machine that will fire if a packet takes too long to transmit / receive.
2012-09-24 20:51:34 -07:00
Stacey Sheldon
215ff56fe8
usbcdc: fix handling of CDC SET_LINE_CODING request
...
The SET_LINE_CODING request contains data and must be
handled as such.
Previously, the only requests that had data were IN
requests. SET_LINE_CODING is an OUT request so it
required additional changes to support a new type of
data request.
2012-09-24 00:56:25 -04:00
Stacey Sheldon
5e37448814
usb: correct enum for CDC SET_CONTROL_LINE_STATE request
2012-09-24 00:53:52 -04:00
Stacey Sheldon
c056ac5261
usbcdc: don't assert on calls when CDC is not initialized
...
The CDC interface is always advertised in the FW USB
descriptors. It is NOT always enabled/initialized at
runtime. Specifically, it can be Disabled in HwSettings.
Previously, any CDC-related query that the host would send
resulted in an assert and a watchdog.
Now, a suitable return code indicating that the request is
unsupported is returned in this scenario.
2012-09-24 00:53:12 -04:00
Brian Webb
a070e1cc3e
RFM22B: Added PIOS_RFM22B_Receive_Packet function and removed rx buffer.
2012-09-23 08:36:38 -07:00
Brian Webb
a46e3cdec3
RFM22B: All outgoing data to the radio is now going through the PIOS_RFM22B_Send_Packet call. Also removed all global variables with the exception of the rx buffer.
2012-09-22 20:13:11 -07:00
Brian Webb
61200f01f5
RFM22B: Major refactoring of te RFM22B driver to implement a state machine for the driver. The state machine should now be complete, and the driver seems to be working pretty well on both the RM and the pipx.
2012-09-22 20:13:10 -07:00
Brian Webb
80509d264e
RFM22B: Start at cleaning up the processing interrupt handling, and starting to make it more of a state machine. Also removed the supervisor, which was causing unnecessary resets. The supervisor functionality is not in the the driver thread.
2012-09-22 20:13:08 -07:00
Brian Webb
057227726b
Radio: Make sure pios_packet_handler is set to 0 when radio module is not initialized.
2012-09-22 20:13:07 -07:00
Brian Webb
8ca2e85f4c
RFM22B: Removed incorrect defaulting of tx power level.
2012-09-22 20:13:05 -07:00
Brian Webb
6623c55846
RFM22B: Moved ISR processing thread into the rfm22b driver.
2012-09-22 20:13:03 -07:00
Brian Webb
432a6dfd00
RM: Fixed crashing when radio module is disabled.
2012-09-22 20:13:02 -07:00
James Cotton
497683e571
Fix OSX simulator
2012-09-18 13:29:11 -05:00
Stacey Sheldon
14123069be
gdb: add gdb config file for CC BU image
2012-09-16 21:13:42 -04:00
Stacey Sheldon
368d57bc92
Merge remote-tracking branch 'origin/lilvinz/OP-300' into next
2012-09-16 16:05:25 -04:00
lilvinz
a6a7ed8157
pios_exti: added returnvalues to exti handlers which allows to use portEND_SWITCHING_ISR
2012-09-16 21:44:09 +02:00
Stacey Sheldon
05483e2a74
simposix: adapt simposix to addition of relay tuning
2012-09-16 15:40:47 -04:00
lilvinz
524cff1c40
pios_mpu6000: fixed masked locals mistake
2012-09-16 21:25:06 +02:00
lilvinz
718062ed6e
pios_led: added support for active_high connected leds
2012-09-16 18:19:27 +02:00
James Cotton
13e7733e5f
Merge branch 'revo-mini' into revo
2012-09-12 02:30:10 -05:00
James Cotton
223a3473c2
Merge branch 'next' into revo-mini
2012-09-12 02:03:39 -05:00
James Cotton
595083c982
PID: Fix small bug in setpoint weighting that had really ugly consequences
2012-09-12 00:07:17 -05:00
James Cotton
4717c376c0
Stabilization: For the inner loop call the setpoint shaping version so that
...
the derivative term can weight the sticks and gyros independently.
2012-09-11 13:21:53 -05:00
James Cotton
e4a167dca1
PID: Add a pid_apply_setpoint which takes in the setpoint and feedback term
...
This version allows performing setpoint weighting, currently on the derivative
component.
2012-09-11 13:21:19 -05:00
James Cotton
11b099b1ef
Stabilization: Add configuration terms for the derivative calculation to the UAVO and pass
...
them in to the PID system.
2012-09-11 12:29:38 -05:00
James Cotton
42bbd52d68
PID: Add a function to set the cutoff for the derivative term
...
Also contains a term for setting the deriative setpoint in the future
2012-09-11 12:27:41 -05:00
James Cotton
86422b8b9e
VtolPathFollower: Make sure to clear the alarm when running so it doesn't show as
...
uninintialized
2012-09-11 02:34:31 -05:00
James Cotton
88b483f37d
PIOS_MPU6000: Make the driver perform the rotation to bring it into the OP
...
coordinate system
Previously there were hacks spread throughout to deal with various ways of
positioning the chips. Now the driver structure specifies the rotation
of the chip relative to the board layout and the output X/Y/Z are already
in OP convention.
This flag seems to do the right thing for Revolution, CC3D, and RevoMini
2012-09-11 01:46:22 -05:00
James Cotton
4cbaa6df88
Revolution: Misses some files for stabilization refactoring in Revolution
2012-09-11 01:44:40 -05:00
a*morale
cf7aea6499
Support for Led Outputs as actuator channels 9&10.
...
Added the ARMING LED and INFO LED option for actuator channel
2012-09-10 20:14:24 -05:00
