David A. Mellis
7ab140700b
Switching Mini w/ ATmega328 upload protocol from stk500 to arduino.
2012-02-29 17:25:46 -05:00
Cristian Maglie
5eef4ca79c
Autoreset 1200 bps fix.
2012-02-27 17:41:38 +01:00
Zach Eveland
ae23ed0570
shortened the watchdog period for resetting Leonardo from 2 s to 250 ms. Reset into bootloader is much snappier.
2012-02-22 22:33:44 -05:00
Zach Eveland
65ddc6c43b
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
2012-02-22 15:19:32 -05:00
Zach Eveland
4c3aa52258
Leonardo now checks whether bootloader should be run after a WDT event.
...
Before the sketch initiates an auto-reset for upload it pokes a magic word into a specific RAM address. On starting the bootloader checks this address. If it finds the magic word it knows the bootloader code should run. If not it jumps straight back to sketch.
Test in a sketch by adding to setup():
wdt_enable(WDTO_2S);
Sketch should upload, start, run for two seconds, WDT, and sketch should restart (not bootloader).
Had to cut out unused descriptor code to make the bootloader still fit in 4k.
2012-02-14 12:17:30 -05:00
Zach Eveland
94c09c2618
Changed Leonardo fuses to select longer clock startup time.
...
Done with the aim of discriminating more reliably between reset sources.
2012-02-14 10:00:55 -05:00
Zach Eveland
52b0c7214b
Leonardo bootloader jumps straight to sketch for a power-on reset.
...
Disconnect programmer after burning bootloader to get the full effect. ICSP and JTAG programmers do a hardware reset after any reset condition, confusing the firmware a little.
2012-02-14 09:59:48 -05:00
Cristian Maglie
9d4cb18f05
ARM: Fixed some compiling issues
2012-02-13 18:00:10 +01:00
Cristian Maglie
1479b2b4cf
ARM: updated package preferences
2012-02-13 17:58:30 +01:00
Zach Eveland
bab3c5eade
Leonardo auto-reset-and-upload changes for Windows (explanation below)
...
On Windows COM port changes when board switched between bootloader and sketch. No way to prevent this so now Windows users have to select the upload port separate from the comm port. Also, handling of reset into bootloader was broken on Windows. Would occasionally leave the original COM port completely unusable. Changed the way this reset is initiated.
Finally, had to add upload.disable.flushing=true flag to boards.txt so IDE wouldn't try to flush the original COM port after it disappeared.
2012-02-13 00:56:06 -05:00
Zach Eveland
25a4fe8607
changed Leonardo bootloader and sketch PID values again (now 0x0701 for bootloader, 0x0801 for sketch)
2012-02-13 00:10:16 -05:00
David A. Mellis
0acebeeff4
prog_char -> char PROGMEM in Print.cpp
...
http://code.google.com/p/arduino/issues/detail?id=795
2012-02-12 19:52:03 -05:00
Zach Eveland
c39793001c
adjusting descriptors - trying to prevent sketch and bootloader from grabbing different COM numbers on Windows
2012-02-08 01:16:56 -05:00
Zach Eveland
4ee57f12e9
changed Caterina descriptors - Arduino LLC VID, new PID, manufacturer string, and serial number
2012-02-07 23:52:55 -05:00
Zach Eveland
5d53eed01a
fixed bug in Caterina which caused some programming instructions to fail
...
Timer 1 interrupts were trashing self-programming timing. Now disable Timer 1 compare match before doing Flash tasks and reenable afterward.
2012-02-07 23:46:31 -05:00
Zach Eveland
f2d5ea87ad
increased Leonardo bootloader timeout to 16 seconds
2012-02-06 15:23:41 -05:00
Cristian Maglie
043c190876
Upload size computation is now parametric
2012-02-06 00:51:24 +01:00
Cristian Maglie
a141a1dc1e
Upload/Program with configurable generic command line tools (wip)
2012-02-05 23:17:15 +01:00
Zach Eveland
5483adf8fe
proper bootloader timeout and LED control in Leonardo bootloader
2012-02-03 23:15:04 -05:00
Zach Eveland
1e0700b536
fixed starting Leonardo bootloader from sketch
...
AvrdudeUploader class opens and closes Leonardo port at the magic baudrate before starting avrdude; reduced reset timeout from 250 ms to 15 ms
2012-02-03 21:42:46 -05:00
Zach Eveland
086ed6382c
modify boards.txt with new settings for Caterina_LUFA
2012-02-03 20:24:24 -05:00
Zach Eveland
5eb7ad154b
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
2012-02-03 19:54:33 -05:00
David A. Mellis
915e4889e4
Making head and tail unsigned to avoid division in serial ISR.
...
http://code.google.com/p/arduino/issues/detail?id=776
2012-02-03 17:24:29 -05:00
Cristian Maglie
30ec90aca3
First attemp to generalize upload for mutiplatform IDE
2012-02-01 14:34:29 +01:00
Zach Eveland
1303b6fbba
Caterina now cleanly hands off operation to the sketch
...
had to remove TIMER1 operation from bootloader - was interfering with normal sketch operation
2012-01-24 18:04:10 -05:00
Zach Eveland
6498b66059
move interrupt vector table to application section before jumping to it after upload finished.
2012-01-21 16:51:55 -05:00
Zach Eveland
73f6f2edd5
Leonardo bootloader checks reason for reset and jumps immediately to sketch if reset was caused by WDT
2012-01-21 16:39:06 -05:00
Zach Eveland
371b72c681
stripped all LUFA LED control. from LUFA-based Caterina
2012-01-19 21:31:51 -05:00
Zach Eveland
83c9f21667
changed fuses to select 4k bootloader for LUFA-based Caterina
2012-01-19 21:18:07 -05:00
Zach Eveland
db397d5b35
added Board/LEDs.h to LUFA-based Caterina
2012-01-19 21:17:12 -05:00
Zach Eveland
98b0491fbd
superficial changes to stock LUFA CDC bootloader - renamed project, removed unnecessary files
2012-01-19 20:31:35 -05:00
Zach Eveland
9c0352b22a
initial checkin of LUFA 111009 CDC bootloader
2012-01-19 20:04:55 -05:00
Cristian Maglie
861aa9308b
[arm] other refinements to platform.txt for sam3u
2012-01-13 20:41:01 +01:00
Cristian Maglie
fe001fdaba
Factored out some common build variables
2012-01-13 20:39:48 +01:00
Cristian Maglie
160fa18adb
Fixed platforms.txt and corrected some paths for multiplatform IDE
2012-01-13 19:09:07 +01:00
Cristian Maglie
34d9004db7
disabled test projects (should be moved in another folder)
2012-01-13 18:14:58 +01:00
Cristian Maglie
47e8a813c8
Merge refinements
2012-01-11 13:59:16 +01:00
Cristian Maglie
1a92ce8fdb
Moved 'sam' platform inside arduino package.
2012-01-11 13:46:51 +01:00
Cristian Maglie
a50431e3a4
Merge branch 'new-extension' into HEAD
...
Conflicts:
.classpath
.settings/org.eclipse.jdt.core.prefs
.settings/org.eclipse.jdt.ui.prefs
app/src/processing/app/Base.java
app/src/processing/app/Editor.java
app/src/processing/app/Sketch.java
app/src/processing/app/debug/Compiler.java
build/build.xml
build/shared/lib/preferences.txt
hardware/arduino/avr/boards.txt
hardware/arduino/avr/bootloaders/atmega/ATmegaBOOT_168.c
hardware/arduino/avr/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex
hardware/arduino/avr/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex
hardware/arduino/avr/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex
hardware/arduino/avr/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex
hardware/arduino/avr/bootloaders/atmega/ATmegaBOOT_168_ng.hex
hardware/arduino/avr/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex
hardware/arduino/avr/bootloaders/atmega/Makefile
hardware/arduino/avr/bootloaders/atmega8/ATmegaBOOT.c
hardware/arduino/avr/bootloaders/atmega8/ATmegaBOOT.hex
hardware/arduino/avr/bootloaders/atmega8/Makefile
hardware/arduino/avr/bootloaders/bt/ATmegaBOOT_168.c
hardware/arduino/avr/bootloaders/bt/ATmegaBOOT_168.hex
hardware/arduino/avr/bootloaders/bt/ATmegaBOOT_168_atmega328_bt.hex
hardware/arduino/avr/bootloaders/bt/Makefile
hardware/arduino/avr/bootloaders/lilypad/LilyPadBOOT_168.hex
hardware/arduino/avr/bootloaders/lilypad/src/ATmegaBOOT.c
hardware/arduino/avr/bootloaders/lilypad/src/Makefile
hardware/arduino/avr/bootloaders/optiboot/optiboot.c
hardware/arduino/avr/bootloaders/optiboot/optiboot_atmega328-Mini.hex
hardware/arduino/avr/bootloaders/stk500v2/License.txt
hardware/arduino/avr/bootloaders/stk500v2/Makefile
hardware/arduino/avr/bootloaders/stk500v2/STK500V2.pnproj
hardware/arduino/avr/bootloaders/stk500v2/STK500V2.pnps
hardware/arduino/avr/bootloaders/stk500v2/avrinterruptnames.h
hardware/arduino/avr/bootloaders/stk500v2/command.h
hardware/arduino/avr/bootloaders/stk500v2/stk500boot.c
hardware/arduino/avr/bootloaders/stk500v2/stk500boot.ppg
hardware/arduino/avr/bootloaders/stk500v2/stk500boot_v2_mega2560.hex
hardware/arduino/avr/cores/arduino/Arduino.h
hardware/arduino/avr/cores/arduino/HardwareSerial.cpp
hardware/arduino/avr/cores/arduino/HardwareSerial.h
hardware/arduino/avr/cores/arduino/IPAddress.cpp
hardware/arduino/avr/cores/arduino/IPAddress.h
hardware/arduino/avr/cores/arduino/Printable.h
hardware/arduino/avr/cores/arduino/Tone.cpp
hardware/arduino/avr/cores/arduino/WCharacter.h
hardware/arduino/avr/cores/arduino/WInterrupts.c
hardware/arduino/avr/cores/arduino/WMath.cpp
hardware/arduino/avr/cores/arduino/WString.cpp
hardware/arduino/avr/cores/arduino/WString.h
hardware/arduino/avr/cores/arduino/binary.h
hardware/arduino/avr/cores/arduino/wiring.c
hardware/arduino/avr/cores/arduino/wiring_analog.c
hardware/arduino/avr/cores/arduino/wiring_digital.c
hardware/arduino/avr/cores/arduino/wiring_private.h
hardware/arduino/avr/cores/arduino/wiring_pulse.c
hardware/arduino/avr/cores/arduino/wiring_shift.c
hardware/arduino/avr/firmwares/MEGA-dfu_and_usbserial_combined.hex
hardware/arduino/avr/firmwares/README.txt
hardware/arduino/avr/firmwares/UNO-dfu_and_usbserial_combined.hex
hardware/arduino/avr/firmwares/arduino-usbdfu/Arduino-usbdfu.c
hardware/arduino/avr/firmwares/arduino-usbdfu/Arduino-usbdfu.h
hardware/arduino/avr/firmwares/arduino-usbdfu/Board/LEDs.h
hardware/arduino/avr/firmwares/arduino-usbdfu/Descriptors.c
hardware/arduino/avr/firmwares/arduino-usbdfu/Descriptors.h
hardware/arduino/avr/firmwares/arduino-usbdfu/makefile
hardware/arduino/avr/firmwares/arduino-usbdfu/readme.txt
hardware/arduino/avr/firmwares/arduino-usbserial/Arduino-usbserial-mega.hex
hardware/arduino/avr/firmwares/arduino-usbserial/Arduino-usbserial-uno.hex
hardware/arduino/avr/firmwares/arduino-usbserial/Arduino-usbserial.c
hardware/arduino/avr/firmwares/arduino-usbserial/Arduino-usbserial.h
hardware/arduino/avr/firmwares/arduino-usbserial/Board/LEDs.h
hardware/arduino/avr/firmwares/arduino-usbserial/Descriptors.c
hardware/arduino/avr/firmwares/arduino-usbserial/Descriptors.h
hardware/arduino/avr/firmwares/arduino-usbserial/Lib/LightweightRingBuff.h
hardware/arduino/avr/firmwares/arduino-usbserial/makefile
hardware/arduino/avr/firmwares/arduino-usbserial/readme.txt
hardware/arduino/avr/libraries/EEPROM/EEPROM.cpp
hardware/arduino/avr/libraries/EEPROM/examples/eeprom_clear/eeprom_clear.ino
hardware/arduino/avr/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino
hardware/arduino/avr/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino
hardware/arduino/avr/libraries/EEPROM/keywords.txt
hardware/arduino/avr/libraries/Ethernet/Dhcp.cpp
hardware/arduino/avr/libraries/Ethernet/Dhcp.h
hardware/arduino/avr/libraries/Ethernet/Dns.cpp
hardware/arduino/avr/libraries/Ethernet/Dns.h
hardware/arduino/avr/libraries/Ethernet/Ethernet.cpp
hardware/arduino/avr/libraries/Ethernet/Ethernet.h
hardware/arduino/avr/libraries/Ethernet/EthernetClient.cpp
hardware/arduino/avr/libraries/Ethernet/EthernetServer.cpp
hardware/arduino/avr/libraries/Ethernet/EthernetUdp.cpp
hardware/arduino/avr/libraries/Ethernet/EthernetUdp.h
hardware/arduino/avr/libraries/Ethernet/examples/BarometricPressureWebServer/BarometricPressureWebServer.ino
hardware/arduino/avr/libraries/Ethernet/examples/ChatServer/ChatServer.ino
hardware/arduino/avr/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino
hardware/arduino/avr/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino
hardware/arduino/avr/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino
hardware/arduino/avr/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
hardware/arduino/avr/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino
hardware/arduino/avr/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.ino
hardware/arduino/avr/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino
hardware/arduino/avr/libraries/Ethernet/examples/WebClient/WebClient.ino
hardware/arduino/avr/libraries/Ethernet/examples/WebServer/WebServer.ino
hardware/arduino/avr/libraries/Ethernet/keywords.txt
hardware/arduino/avr/libraries/Ethernet/util.h
hardware/arduino/avr/libraries/Ethernet/utility/socket.cpp
hardware/arduino/avr/libraries/Ethernet/utility/socket.h
hardware/arduino/avr/libraries/Ethernet/utility/w5100.cpp
hardware/arduino/avr/libraries/Ethernet/utility/w5100.h
hardware/arduino/avr/libraries/Firmata/Boards.h
hardware/arduino/avr/libraries/Firmata/Firmata.cpp
hardware/arduino/avr/libraries/Firmata/Firmata.h
hardware/arduino/avr/libraries/Firmata/LICENSE.txt
hardware/arduino/avr/libraries/Firmata/TODO.txt
hardware/arduino/avr/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.ino
hardware/arduino/avr/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.ino
hardware/arduino/avr/libraries/Firmata/examples/EchoString/EchoString.ino
hardware/arduino/avr/libraries/Firmata/examples/I2CFirmata/I2CFirmata.ino
hardware/arduino/avr/libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt
hardware/arduino/avr/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.ino
hardware/arduino/avr/libraries/Firmata/examples/ServoFirmata/ServoFirmata.ino
hardware/arduino/avr/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.ino
hardware/arduino/avr/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.ino
hardware/arduino/avr/libraries/Firmata/examples/StandardFirmata/LICENSE.txt
hardware/arduino/avr/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino
hardware/arduino/avr/libraries/Firmata/keywords.txt
hardware/arduino/avr/libraries/SD/File.cpp
hardware/arduino/avr/libraries/SD/README.txt
hardware/arduino/avr/libraries/SD/SD.cpp
hardware/arduino/avr/libraries/SD/SD.h
hardware/arduino/avr/libraries/SD/examples/CardInfo/CardInfo.ino
hardware/arduino/avr/libraries/SD/examples/Datalogger/Datalogger.ino
hardware/arduino/avr/libraries/SD/examples/DumpFile/DumpFile.ino
hardware/arduino/avr/libraries/SD/examples/Files/Files.ino
hardware/arduino/avr/libraries/SD/examples/ReadWrite/ReadWrite.ino
hardware/arduino/avr/libraries/SD/examples/listfiles/listfiles.ino
hardware/arduino/avr/libraries/SD/keywords.txt
hardware/arduino/avr/libraries/SD/utility/FatStructs.h
hardware/arduino/avr/libraries/SD/utility/Sd2Card.cpp
hardware/arduino/avr/libraries/SD/utility/Sd2Card.h
hardware/arduino/avr/libraries/SD/utility/Sd2PinMap.h
hardware/arduino/avr/libraries/SD/utility/SdFat.h
hardware/arduino/avr/libraries/SD/utility/SdFatUtil.h
hardware/arduino/avr/libraries/SD/utility/SdFatmainpage.h
hardware/arduino/avr/libraries/SD/utility/SdFile.cpp
hardware/arduino/avr/libraries/SD/utility/SdInfo.h
hardware/arduino/avr/libraries/SD/utility/SdVolume.cpp
hardware/arduino/avr/libraries/SPI/SPI.cpp
hardware/arduino/avr/libraries/SPI/SPI.h
hardware/arduino/avr/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino
hardware/arduino/avr/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor/BarometricPressureSensor.ino
hardware/arduino/avr/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino
hardware/arduino/avr/libraries/SPI/keywords.txt
hardware/arduino/avr/libraries/Servo/Servo.cpp
hardware/arduino/avr/libraries/Servo/Servo.h
hardware/arduino/avr/libraries/Servo/examples/Knob/Knob.ino
hardware/arduino/avr/libraries/Servo/examples/Sweep/Sweep.ino
hardware/arduino/avr/libraries/Servo/keywords.txt
hardware/arduino/avr/libraries/SoftwareSerial/SoftwareSerial.cpp
hardware/arduino/avr/libraries/SoftwareSerial/SoftwareSerial.h
hardware/arduino/avr/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
hardware/arduino/avr/libraries/SoftwareSerial/keywords.txt
hardware/arduino/avr/libraries/Wire/Wire.cpp
hardware/arduino/avr/libraries/Wire/Wire.h
hardware/arduino/avr/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino
hardware/arduino/avr/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino
hardware/arduino/avr/libraries/Wire/examples/master_reader/master_reader.ino
hardware/arduino/avr/libraries/Wire/examples/master_writer/master_writer.ino
hardware/arduino/avr/libraries/Wire/examples/slave_receiver/slave_receiver.ino
hardware/arduino/avr/libraries/Wire/examples/slave_sender/slave_sender.ino
hardware/arduino/avr/libraries/Wire/keywords.txt
hardware/arduino/avr/libraries/Wire/utility/twi.c
hardware/arduino/avr/libraries/Wire/utility/twi.h
hardware/arduino/avr/programmers.txt
hardware/arduino/avr/variants/mega/pins_arduino.h
hardware/arduino/avr/variants/micro/pins_arduino.h
hardware/arduino/avr/variants/standard/pins_arduino.h
hardware/arduino/boards.txt
hardware/arduino/bootloaders/atmega/ATmegaBOOT_168.c
hardware/arduino/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex
hardware/arduino/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex
hardware/arduino/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex
hardware/arduino/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex
hardware/arduino/bootloaders/atmega/ATmegaBOOT_168_ng.hex
hardware/arduino/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex
hardware/arduino/bootloaders/atmega/Makefile
hardware/arduino/bootloaders/atmega8/ATmegaBOOT.c
hardware/arduino/bootloaders/atmega8/ATmegaBOOT.hex
hardware/arduino/bootloaders/atmega8/Makefile
hardware/arduino/bootloaders/bt/ATmegaBOOT_168.c
hardware/arduino/bootloaders/bt/ATmegaBOOT_168.hex
hardware/arduino/bootloaders/bt/ATmegaBOOT_168_atmega328_bt.hex
hardware/arduino/bootloaders/bt/Makefile
hardware/arduino/bootloaders/lilypad/LilyPadBOOT_168.hex
hardware/arduino/bootloaders/lilypad/src/ATmegaBOOT.c
hardware/arduino/bootloaders/lilypad/src/Makefile
hardware/arduino/bootloaders/optiboot/optiboot.c
hardware/arduino/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.hex
hardware/arduino/bootloaders/stk500v2/License.txt
hardware/arduino/bootloaders/stk500v2/Makefile
hardware/arduino/bootloaders/stk500v2/STK500V2.pnproj
hardware/arduino/bootloaders/stk500v2/STK500V2.pnps
hardware/arduino/bootloaders/stk500v2/avrinterruptnames.h
hardware/arduino/bootloaders/stk500v2/command.h
hardware/arduino/bootloaders/stk500v2/stk500boot.c
hardware/arduino/bootloaders/stk500v2/stk500boot.ppg
hardware/arduino/bootloaders/stk500v2/stk500boot_v2_mega2560.hex
hardware/arduino/cores/arduino/Arduino.h
hardware/arduino/cores/arduino/HardwareSerial.cpp
hardware/arduino/cores/arduino/HardwareSerial.h
hardware/arduino/cores/arduino/Stream.h
hardware/arduino/cores/arduino/Tone.cpp
hardware/arduino/cores/arduino/WCharacter.h
hardware/arduino/cores/arduino/WInterrupts.c
hardware/arduino/cores/arduino/WMath.cpp
hardware/arduino/cores/arduino/WString.cpp
hardware/arduino/cores/arduino/WString.h
hardware/arduino/cores/arduino/binary.h
hardware/arduino/cores/arduino/wiring.c
hardware/arduino/cores/arduino/wiring_analog.c
hardware/arduino/cores/arduino/wiring_digital.c
hardware/arduino/cores/arduino/wiring_private.h
hardware/arduino/cores/arduino/wiring_pulse.c
hardware/arduino/cores/arduino/wiring_shift.c
hardware/arduino/firmwares/MEGA-dfu_and_usbserial_combined.hex
hardware/arduino/firmwares/README.txt
hardware/arduino/firmwares/UNO-dfu_and_usbserial_combined.hex
hardware/arduino/firmwares/arduino-usbdfu/Arduino-usbdfu.c
hardware/arduino/firmwares/arduino-usbdfu/Arduino-usbdfu.h
hardware/arduino/firmwares/arduino-usbdfu/Board/LEDs.h
hardware/arduino/firmwares/arduino-usbdfu/Descriptors.c
hardware/arduino/firmwares/arduino-usbdfu/Descriptors.h
hardware/arduino/firmwares/arduino-usbdfu/makefile
hardware/arduino/firmwares/arduino-usbdfu/readme.txt
hardware/arduino/firmwares/arduino-usbserial/Arduino-usbserial-mega.hex
hardware/arduino/firmwares/arduino-usbserial/Arduino-usbserial-uno.hex
hardware/arduino/firmwares/arduino-usbserial/Arduino-usbserial.c
hardware/arduino/firmwares/arduino-usbserial/Arduino-usbserial.h
hardware/arduino/firmwares/arduino-usbserial/Board/LEDs.h
hardware/arduino/firmwares/arduino-usbserial/Descriptors.c
hardware/arduino/firmwares/arduino-usbserial/Descriptors.h
hardware/arduino/firmwares/arduino-usbserial/Lib/LightweightRingBuff.h
hardware/arduino/firmwares/arduino-usbserial/makefile
hardware/arduino/firmwares/arduino-usbserial/readme.txt
hardware/arduino/pins/mega/pins_arduino.h
hardware/arduino/pins/standard/pins_arduino.h
hardware/arduino/programmers.txt
hardware/avr/boards.txt
hardware/avr/bootloaders/atmega/ATmegaBOOT_168.c
hardware/avr/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex
hardware/avr/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex
hardware/avr/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex
hardware/avr/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex
hardware/avr/bootloaders/atmega/ATmegaBOOT_168_ng.hex
hardware/avr/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex
hardware/avr/bootloaders/atmega/Makefile
hardware/avr/bootloaders/atmega8/ATmegaBOOT.c
hardware/avr/bootloaders/atmega8/ATmegaBOOT.hex
hardware/avr/bootloaders/atmega8/Makefile
hardware/avr/bootloaders/bt/ATmegaBOOT_168.c
hardware/avr/bootloaders/bt/ATmegaBOOT_168.hex
hardware/avr/bootloaders/bt/ATmegaBOOT_168_atmega328_bt.hex
hardware/avr/bootloaders/bt/Makefile
hardware/avr/bootloaders/lilypad/LilyPadBOOT_168.hex
hardware/avr/bootloaders/lilypad/src/ATmegaBOOT.c
hardware/avr/bootloaders/lilypad/src/Makefile
hardware/avr/bootloaders/optiboot/Makefile
hardware/avr/bootloaders/optiboot/makeall
hardware/avr/bootloaders/optiboot/optiboot.c
hardware/avr/bootloaders/optiboot/optiboot_atmega328.hex
hardware/avr/bootloaders/optiboot/optiboot_atmega328.lst
hardware/avr/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.hex
hardware/avr/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.lst
hardware/avr/bootloaders/optiboot/optiboot_diecimila.hex
hardware/avr/bootloaders/optiboot/optiboot_diecimila.lst
hardware/avr/bootloaders/optiboot/optiboot_lilypad.hex
hardware/avr/bootloaders/optiboot/optiboot_lilypad.lst
hardware/avr/bootloaders/optiboot/optiboot_lilypad_resonator.hex
hardware/avr/bootloaders/optiboot/optiboot_lilypad_resonator.lst
hardware/avr/bootloaders/optiboot/optiboot_luminet.hex
hardware/avr/bootloaders/optiboot/optiboot_luminet.lst
hardware/avr/bootloaders/optiboot/optiboot_pro_16MHz.hex
hardware/avr/bootloaders/optiboot/optiboot_pro_16MHz.lst
hardware/avr/bootloaders/optiboot/optiboot_pro_20mhz.hex
hardware/avr/bootloaders/optiboot/optiboot_pro_20mhz.lst
hardware/avr/bootloaders/optiboot/optiboot_pro_8MHz.hex
hardware/avr/bootloaders/optiboot/optiboot_pro_8MHz.lst
hardware/avr/bootloaders/stk500v2/License.txt
hardware/avr/bootloaders/stk500v2/Makefile
hardware/avr/bootloaders/stk500v2/STK500V2.pnproj
hardware/avr/bootloaders/stk500v2/STK500V2.pnps
hardware/avr/bootloaders/stk500v2/avrinterruptnames.h
hardware/avr/bootloaders/stk500v2/command.h
hardware/avr/bootloaders/stk500v2/stk500boot.c
hardware/avr/bootloaders/stk500v2/stk500boot.ppg
hardware/avr/bootloaders/stk500v2/stk500boot_v2_mega2560.hex
hardware/avr/cores/arduino/Arduino.h
hardware/avr/cores/arduino/HardwareSerial.cpp
hardware/avr/cores/arduino/HardwareSerial.h
hardware/avr/cores/arduino/Print.cpp
hardware/avr/cores/arduino/Print.h
hardware/avr/cores/arduino/Stream.h
hardware/avr/cores/arduino/WCharacter.h
hardware/avr/cores/arduino/WInterrupts.c
hardware/avr/cores/arduino/WMath.cpp
hardware/avr/cores/arduino/WString.cpp
hardware/avr/cores/arduino/WString.h
hardware/avr/cores/arduino/main.cpp
hardware/avr/cores/arduino/wiring.c
hardware/avr/cores/arduino/wiring_analog.c
hardware/avr/cores/arduino/wiring_digital.c
hardware/avr/cores/arduino/wiring_private.h
hardware/avr/cores/arduino/wiring_pulse.c
hardware/avr/cores/arduino/wiring_shift.c
hardware/avr/firmwares/MEGA-dfu_and_usbserial_combined.hex
hardware/avr/firmwares/README.txt
hardware/avr/firmwares/UNO-dfu_and_usbserial_combined.hex
hardware/avr/firmwares/arduino-usbdfu/Arduino-usbdfu.c
hardware/avr/firmwares/arduino-usbdfu/Arduino-usbdfu.h
hardware/avr/firmwares/arduino-usbdfu/Board/LEDs.h
hardware/avr/firmwares/arduino-usbdfu/Descriptors.c
hardware/avr/firmwares/arduino-usbdfu/Descriptors.h
hardware/avr/firmwares/arduino-usbdfu/makefile
hardware/avr/firmwares/arduino-usbdfu/readme.txt
hardware/avr/firmwares/arduino-usbserial/Arduino-usbserial-mega.hex
hardware/avr/firmwares/arduino-usbserial/Arduino-usbserial-uno.hex
hardware/avr/firmwares/arduino-usbserial/Arduino-usbserial.c
hardware/avr/firmwares/arduino-usbserial/Arduino-usbserial.h
hardware/avr/firmwares/arduino-usbserial/Board/LEDs.h
hardware/avr/firmwares/arduino-usbserial/Descriptors.c
hardware/avr/firmwares/arduino-usbserial/Descriptors.h
hardware/avr/firmwares/arduino-usbserial/Lib/LightweightRingBuff.h
hardware/avr/firmwares/arduino-usbserial/makefile
hardware/avr/firmwares/arduino-usbserial/readme.txt
hardware/avr/libraries/EEPROM/EEPROM.cpp
hardware/avr/libraries/EEPROM/EEPROM.h
hardware/avr/libraries/EEPROM/examples/eeprom_clear/eeprom_clear.pde
hardware/avr/libraries/EEPROM/examples/eeprom_read/eeprom_read.pde
hardware/avr/libraries/EEPROM/examples/eeprom_write/eeprom_write.pde
hardware/avr/libraries/EEPROM/keywords.txt
hardware/avr/libraries/Ethernet/Client.cpp
hardware/avr/libraries/Ethernet/Client.h
hardware/avr/libraries/Ethernet/Dhcp.cpp
hardware/avr/libraries/Ethernet/Dhcp.h
hardware/avr/libraries/Ethernet/Dns.cpp
hardware/avr/libraries/Ethernet/Dns.h
hardware/avr/libraries/Ethernet/Ethernet.cpp
hardware/avr/libraries/Ethernet/Ethernet.h
hardware/avr/libraries/Ethernet/IPAddress.cpp
hardware/avr/libraries/Ethernet/IPAddress.h
hardware/avr/libraries/Ethernet/Server.cpp
hardware/avr/libraries/Ethernet/Server.h
hardware/avr/libraries/Ethernet/Udp.cpp
hardware/avr/libraries/Ethernet/Udp.h
hardware/avr/libraries/Ethernet/examples/BarometricPressureWebServer/BarometricPressureWebServer.pde
hardware/avr/libraries/Ethernet/examples/ChatServer/ChatServer.pde
hardware/avr/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.pde
hardware/avr/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.pde
hardware/avr/libraries/Ethernet/examples/PachubeClient/PachubeClient.pde
hardware/avr/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.pde
hardware/avr/libraries/Ethernet/examples/TelnetClient/TelnetClient.pde
hardware/avr/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.pde
hardware/avr/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.pde
hardware/avr/libraries/Ethernet/examples/WebClient/WebClient.pde
hardware/avr/libraries/Ethernet/examples/WebServer/WebServer.pde
hardware/avr/libraries/Ethernet/keywords.txt
hardware/avr/libraries/Ethernet/util.h
hardware/avr/libraries/Ethernet/utility/socket.cpp
hardware/avr/libraries/Ethernet/utility/socket.h
hardware/avr/libraries/Ethernet/utility/w5100.cpp
hardware/avr/libraries/Ethernet/utility/w5100.h
hardware/avr/libraries/Firmata/Boards.h
hardware/avr/libraries/Firmata/Firmata.cpp
hardware/avr/libraries/Firmata/Firmata.h
hardware/avr/libraries/Firmata/LICENSE.txt
hardware/avr/libraries/Firmata/TODO.txt
hardware/avr/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.pde
hardware/avr/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.pde
hardware/avr/libraries/Firmata/examples/AnalogFirmata/Makefile
hardware/avr/libraries/Firmata/examples/EchoString/EchoString.pde
hardware/avr/libraries/Firmata/examples/EchoString/Makefile
hardware/avr/libraries/Firmata/examples/I2CFirmata/I2CFirmata.pde
hardware/avr/libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt
hardware/avr/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.pde
hardware/avr/libraries/Firmata/examples/ServoFirmata/Makefile
hardware/avr/libraries/Firmata/examples/ServoFirmata/ServoFirmata.pde
hardware/avr/libraries/Firmata/examples/SimpleAnalogFirmata/Makefile
hardware/avr/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.pde
hardware/avr/libraries/Firmata/examples/SimpleDigitalFirmata/Makefile
hardware/avr/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.pde
hardware/avr/libraries/Firmata/examples/StandardFirmata/LICENSE.txt
hardware/avr/libraries/Firmata/examples/StandardFirmata/Makefile
hardware/avr/libraries/Firmata/examples/StandardFirmata/StandardFirmata.pde
hardware/avr/libraries/Firmata/examples/StandardFirmata_2_2_forUNO_0_3/StandardFirmata_2_2_forUNO_0_3.pde
hardware/avr/libraries/Firmata/keywords.txt
hardware/avr/libraries/SD/File.cpp
hardware/avr/libraries/SD/README.txt
hardware/avr/libraries/SD/SD.cpp
hardware/avr/libraries/SD/SD.h
hardware/avr/libraries/SD/examples/CardInfo/CardInfo.pde
hardware/avr/libraries/SD/examples/Datalogger/Datalogger.pde
hardware/avr/libraries/SD/examples/DumpFile/DumpFile.pde
hardware/avr/libraries/SD/examples/Files/Files.pde
hardware/avr/libraries/SD/examples/ReadWrite/ReadWrite.pde
hardware/avr/libraries/SD/examples/listfiles/listfiles.pde
hardware/avr/libraries/SD/keywords.txt
hardware/avr/libraries/SD/utility/FatStructs.h
hardware/avr/libraries/SD/utility/Sd2Card.cpp
hardware/avr/libraries/SD/utility/Sd2Card.h
hardware/avr/libraries/SD/utility/Sd2PinMap.h
hardware/avr/libraries/SD/utility/SdFat.h
hardware/avr/libraries/SD/utility/SdFatUtil.h
hardware/avr/libraries/SD/utility/SdFatmainpage.h
hardware/avr/libraries/SD/utility/SdFile.cpp
hardware/avr/libraries/SD/utility/SdInfo.h
hardware/avr/libraries/SD/utility/SdVolume.cpp
hardware/avr/libraries/SPI/SPI.cpp
hardware/avr/libraries/SPI/SPI.h
hardware/avr/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor/BarometricPressureSensor.pde
hardware/avr/libraries/Servo/Servo.cpp
hardware/avr/libraries/Servo/Servo.h
hardware/avr/libraries/Servo/examples/Knob/Knob.pde
hardware/avr/libraries/Servo/examples/Sweep/Sweep.pde
hardware/avr/libraries/Servo/keywords.txt
hardware/avr/libraries/SoftwareSerial/SoftwareSerial.cpp
hardware/avr/libraries/SoftwareSerial/SoftwareSerial.h
hardware/avr/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
hardware/avr/libraries/SoftwareSerial/examples/TwoPortRXExample/TwoPortRXExample.pde
hardware/avr/libraries/SoftwareSerial/icrmacros.h
hardware/avr/libraries/SoftwareSerial/keywords.txt
hardware/avr/libraries/Wire/Wire.cpp
hardware/avr/libraries/Wire/Wire.h
hardware/avr/libraries/Wire/utility/twi.c
hardware/avr/libraries/Wire/utility/twi.h
hardware/avr/programmers.txt
hardware/avr/variants/mega/pins_arduino.h
hardware/avr/variants/standard/pins_arduino.h
hardware/sam/cores/sam/Tone.cpp.disabled
hardware/sam/cores/sam/binary.h
hardware/sam/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.pde
hardware/sam/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.pde
hardware/sam/libraries/SPI/keywords.txt
hardware/sam/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.pde
hardware/sam/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.pde
hardware/sam/libraries/Wire/examples/master_reader/master_reader.pde
hardware/sam/libraries/Wire/examples/master_writer/master_writer.pde
hardware/sam/libraries/Wire/examples/slave_receiver/slave_receiver.pde
hardware/sam/libraries/Wire/examples/slave_sender/slave_sender.pde
hardware/sam/libraries/Wire/keywords.txt
libraries/EEPROM/EEPROM.cpp
libraries/EEPROM/EEPROM.h
libraries/EEPROM/examples/eeprom_clear/eeprom_clear.pde
libraries/EEPROM/examples/eeprom_read/eeprom_read.pde
libraries/EEPROM/examples/eeprom_write/eeprom_write.pde
libraries/EEPROM/keywords.txt
libraries/Ethernet/Client.cpp
libraries/Ethernet/Dhcp.cpp
libraries/Ethernet/Dhcp.h
libraries/Ethernet/Dns.cpp
libraries/Ethernet/Dns.h
libraries/Ethernet/Ethernet.cpp
libraries/Ethernet/Ethernet.h
libraries/Ethernet/IPAddress.cpp
libraries/Ethernet/IPAddress.h
libraries/Ethernet/Server.cpp
libraries/Ethernet/Udp.cpp
libraries/Ethernet/Udp.h
libraries/Ethernet/examples/BarometricPressureWebServer/BarometricPressureWebServer.pde
libraries/Ethernet/examples/ChatServer/ChatServer.pde
libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.pde
libraries/Ethernet/examples/DnsWebClient/DnsWebClient.pde
libraries/Ethernet/examples/PachubeClient/PachubeClient.pde
libraries/Ethernet/examples/PachubeClientString/PachubeClientString.pde
libraries/Ethernet/examples/TelnetClient/TelnetClient.pde
libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.pde
libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.pde
libraries/Ethernet/examples/WebClient/WebClient.pde
libraries/Ethernet/examples/WebServer/WebServer.pde
libraries/Ethernet/keywords.txt
libraries/Ethernet/util.h
libraries/Ethernet/utility/socket.cpp
libraries/Ethernet/utility/socket.h
libraries/Ethernet/utility/w5100.cpp
libraries/Ethernet/utility/w5100.h
libraries/Firmata/Boards.h
libraries/Firmata/Firmata.cpp
libraries/Firmata/Firmata.h
libraries/Firmata/LICENSE.txt
libraries/Firmata/TODO.txt
libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.pde
libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.pde
libraries/Firmata/examples/EchoString/EchoString.pde
libraries/Firmata/examples/I2CFirmata/I2CFirmata.pde
libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt
libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.pde
libraries/Firmata/examples/ServoFirmata/ServoFirmata.pde
libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.pde
libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.pde
libraries/Firmata/examples/StandardFirmata/LICENSE.txt
libraries/Firmata/examples/StandardFirmata_2_2_forUNO_0_3/StandardFirmata_2_2_forUNO_0_3.pde
libraries/Firmata/keywords.txt
libraries/SD/File.cpp
libraries/SD/README.txt
libraries/SD/SD.cpp
libraries/SD/SD.h
libraries/SD/examples/CardInfo/CardInfo.pde
libraries/SD/examples/Datalogger/Datalogger.pde
libraries/SD/examples/DumpFile/DumpFile.pde
libraries/SD/examples/Files/Files.pde
libraries/SD/examples/ReadWrite/ReadWrite.pde
libraries/SD/examples/listfiles/listfiles.pde
libraries/SD/keywords.txt
libraries/SD/utility/FatStructs.h
libraries/SD/utility/Sd2Card.cpp
libraries/SD/utility/Sd2Card.h
libraries/SD/utility/Sd2PinMap.h
libraries/SD/utility/SdFat.h
libraries/SD/utility/SdFatUtil.h
libraries/SD/utility/SdFatmainpage.h
libraries/SD/utility/SdFile.cpp
libraries/SD/utility/SdInfo.h
libraries/SD/utility/SdVolume.cpp
libraries/SPI/SPI.cpp
libraries/SPI/SPI.h
libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.pde
libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor/BarometricPressureSensor.pde
libraries/SPI/examples/DigitalPotControl/DigitalPotControl.pde
libraries/SPI/keywords.txt
libraries/Servo/Servo.cpp
libraries/Servo/Servo.h
libraries/Servo/examples/Knob/Knob.pde
libraries/Servo/examples/Sweep/Sweep.pde
libraries/Servo/keywords.txt
libraries/SoftwareSerial/SoftwareSerial.cpp
libraries/SoftwareSerial/SoftwareSerial.h
libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
libraries/SoftwareSerial/keywords.txt
libraries/Wire/Wire.cpp
libraries/Wire/Wire.h
libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.pde
libraries/Wire/examples/digital_potentiometer/digital_potentiometer.pde
libraries/Wire/examples/master_reader/master_reader.pde
libraries/Wire/examples/master_writer/master_writer.pde
libraries/Wire/examples/slave_receiver/slave_receiver.pde
libraries/Wire/examples/slave_sender/slave_sender.pde
libraries/Wire/keywords.txt
libraries/Wire/utility/twi.c
libraries/Wire/utility/twi.h
2012-01-11 13:45:31 +01:00
Zach Eveland
0fc76a6b87
made Leonardo and Micro bootloader PIDs same as sketch PIDs
2012-01-10 21:23:01 -05:00
Zach Eveland
2dfb0dce2c
restored composite and non-composite device descriptors (removed in 4b05c3fc75)
...
Windows wants to see both types of device descriptors.
2012-01-10 20:52:57 -05:00
Zach Eveland
77b40e6bba
reenabled HID to force Leonardo bootloader to enumerate as a composite device
2012-01-10 17:04:32 -05:00
Zach Eveland
932afb8428
renamed DiskLoader to Caterina (after Leonardo's mom)
2012-01-10 16:29:47 -05:00
Zach Eveland
99fea13f84
changed USB PID for Leonardo and Micro bootloaders
...
sketch and bootloader will use different PIDs to distinguish one from the other.
2012-01-10 16:09:56 -05:00
Zach Eveland
48ed974834
fixed warning when comparing pgm_read_word(0) to -1 (thanks, Limor Fried and Phillip Torrone)
2012-01-10 16:00:46 -05:00
Zach Eveland
e3b89d178d
got rid of u8, u16, u32 typedefs in Diskloader
...
done to bring types in line with others in Arduino core
2012-01-10 15:51:44 -05:00
Zach Eveland
f403b001a2
made the bootloader's LED control macro names less offensive
...
TX_LED_OFF() instead of TXLED0, etc.
2012-01-10 15:38:26 -05:00
Zach Eveland
4b05c3fc75
added conditional compilation for HID, removed conditional compilation for CDC (is always used). disabled HID by default. also always enumerates as composite now.
...
the bootloader must always have a CDC interface. HID is optional and not even complete to reduce size.
2012-01-10 15:31:56 -05:00
Zach Eveland
015044add5
fix bug in handling of long descriptors for bootloader USB (thank you, Todd Krein, Limor Fried, and Phillip Torrone)
...
descriptors longer than 255 bytes were being shortened, causing problems with enumeration under Windows
2012-01-10 14:25:40 -05:00
Zach Eveland
2622ad5580
Merge branch 'master' of github.com:arduino/Arduino into new-extension
2012-01-10 12:02:27 -05:00
Cristian Maglie
742f59ac98
Disable PDC controller during TWI init.
2012-01-09 18:53:46 +01:00
Cristian Maglie
c2d1de3844
Removed unused/unuseful defines from platform.txt
2012-01-09 18:51:51 +01:00
David A. Mellis
11281ec77e
Adding links to documentation of boards.txt and programmers.txt files.
2012-01-04 16:01:52 -05:00
Cristian Maglie
57b8713cab
Moved libraries folder inside platform folder. Now libraries and examples are searched per board/platform
2012-01-04 15:14:51 +01:00
David A. Mellis
76c964d32b
Adding INPUT_PULLUP option pinMode(). (Paul Stoffregen).
...
This also changes pinMode(pin, INPUT); to explicitly disable the pull-up resistor, even if it was previously set.
http://code.google.com/p/arduino/issues/detail?id=246
2012-01-02 14:20:28 -05:00
David A. Mellis
5088b09f2d
Fixing findUntil() problem with repeated initial characters. (Jeffery.zksun)
...
http://code.google.com/p/arduino/issues/detail?id=768
2012-01-02 13:49:59 -05:00
Cristian Maglie
387e6b63c7
Renamed platforms.txt to platform.txt
2012-01-02 19:11:57 +01:00
David A. Mellis
cce4ef7c69
Fixing warnings (unsigned comparisons to 0). (maniacbug)
2012-01-02 12:57:23 -05:00
David A. Mellis
c441bc1a0d
Fixing static is not at beginning of declaration warnings (maniacbug).
2012-01-02 12:38:23 -05:00
Cristian Maglie
06b6d060db
Removed implicit xxxx.platform=avr from boards.txt
2012-01-02 17:02:04 +01:00
Zach Eveland
f39ec37722
reset the Leonardo board when leaving the bootloader, before starting the sketch
...
Done so all IO and other registers are properly reinitialized when a new sketch is uploaded or when an existing sketch is started. Uses a watchdog timeout with a 15 ms period to accomplish the reset. Bootloader checks the reason for reset and only enumerates as bootloader and enters the programming loop if reset was NOT caused by WDT.
2011-12-31 12:19:08 -05:00
Cristian Maglie
5ad4422fc7
Merge remote-tracking branch 'arduino/master' into platforms-b
2011-12-31 17:29:36 +01:00
Zach Eveland
8f9ec88f57
Merge branch 'master' of github.com:arduino/Arduino into new-extension
2011-12-31 11:21:44 -05:00
Cristian Maglie
abe41d805d
platforms.txt recipes now have symbolic variables instead of indexes ({0},{1},etc.)
...
Recipes arguments are splitted with spaces instead of |. Single argument containing spaces
should be placed between "double quotes".
Refactored and formatted Compiler class, removed all unused code in comments.
2011-12-31 14:32:48 +01:00
David A. Mellis
f520bb5051
Simplifying microseconds <-> clock cycles conversions. (Rob Tillaart)
...
This should fix problems with overflows in pulseIn(). It may make millis() slightly less precise for clock speeds that aren't multiple of 1 million, but we don't really support those anyway.
http://code.google.com/p/arduino/issues/detail?id=675
2011-12-30 18:05:12 -05:00
Cristian Maglie
1b3ae5fa63
Created second level in hardware folder: hardware/PACKAGE/PLATFORM/...
...
Made some helper class for files filtering.
platforms.txt now contains only one platform at a time.
Some cleanup in Compiler and AvrDudeUploader classes.
2011-12-30 15:46:04 +01:00
David A. Mellis
80a2154279
Fixing ArduinoISP sketch by lowering baud rate to 9600 (from 19200).
...
http://code.google.com/p/arduino/issues/detail?id=661
2011-12-28 18:43:36 -05:00
Zach Eveland
bdf7107507
bootloader merged with blink sketch
...
full set of descriptors in sketch fixes driver installation issue on Win7.
2011-12-26 17:19:48 -05:00
Cristian Maglie
668345cdf3
USB Core porting WIP
2011-12-22 21:29:14 +01:00
Cristian Maglie
e63c2d1429
Various post-merge refinements.
2011-12-22 13:07:39 +01:00
Cristian Maglie
65c15d93eb
Merge commit 'fcbbf8f4b4960bae1091c0cd9dc58b4a1885baf6' into platforms-b
...
Conflicts:
app/src/processing/app/Base.java
app/src/processing/app/debug/Compiler.java
build/build.xml
hardware/arduino/boards.txt
2011-12-22 00:35:33 +01:00
Zach Eveland
20e7f2d354
changed Keyboard write() method to type(). Made write() an alias for type() to allow subclassing by Stream.
2011-12-20 17:09:44 -05:00
Zach Eveland
20564fb1d0
Revert "changed Keyboard write() method to type(). Made write() an alias for type() to allow subclassing by Stream."
...
This reverts commit de1d5fc0cb
2011-12-20 17:08:07 -05:00
Zach Eveland
de1d5fc0cb
changed Keyboard write() method to type(). Made write() an alias for type() to allow subclassing by Stream.
2011-12-20 17:00:19 -05:00
Zach Eveland
d874bc9832
fixed attachInterrupt() on Leonardo
...
had to define a separate block for the 32U4 since it looks like a Mega-series board based on a simple register trick. Only two useable HW interrupts though, compared to the Megas' 8, and numbering differs.
2011-12-19 15:40:12 -05:00
Zach Eveland
fd28193336
added asynchronous buffering of received CDC characters
...
This fixes the issue Federico reported where bytes written by host but not read by sketch would cause serial connection to lock up. Ring buffer implementation is based on HardwareSerial.cpp.
Adds public accept() method to CDC.
2011-12-18 17:52:35 -05:00
Zach Eveland
6a44faedbb
fixed digitalWrite on timer 4 pins (D6 and D13)
2011-12-18 14:18:38 -05:00
Zach Eveland
4b358f21d9
fix bootloader size in boards.txt - 2 kB instead of 4 kB
2011-12-18 12:52:30 -05:00
Cristian Maglie
7d7da2d826
analogWrite() with Timer Counter device
2011-12-14 13:35:58 +01:00
Zach Eveland
699315c359
fixed TIMER4 use on Leonardo
...
ATMEGA32U4 has major differences in TIMER4 registers compared to ATMEGA1280 and 2560. turnOffPWM, analogWrite, and initialize routines had wrong registers, bit names, etc.
2011-12-11 19:56:50 -05:00
Cristian Maglie
d07099d090
First PWM draft, independent duty cycle for high and low channel should
...
be done.
2011-12-07 00:22:03 +01:00
Cristian Maglie
fdcb017d41
SPI initialization fix. Seems working need more testing
2011-12-05 19:21:19 +01:00
Cristian Maglie
e484f0712a
Fixed USARTClass
2011-12-05 14:28:51 +01:00
David A. Mellis
eb380de972
Updated reference voltage defines for ATmega1284P.
...
http://code.google.com/p/arduino/issues/detail?id=728
2011-12-02 17:18:15 -05:00
David A. Mellis
d7d0e304d5
Support 3rd external interrupt on ATmega1284P (maniacbug)
...
http://code.google.com/p/arduino/issues/detail?id=728
2011-12-02 17:17:27 -05:00
David A. Mellis
0d70c7272e
Fixing delayMicroseconds() timing for 20 MHz clocks. (Erdem U. Altinyurt)
...
http://code.google.com/p/arduino/issues/detail?id=306
2011-12-02 17:04:20 -05:00
Cristian Maglie
5a238022a3
SPI lib (WIP)
2011-12-02 16:29:50 +01:00
Cristian Maglie
906bb28f9e
Applied to UsartClass the same fix adopted for UartClass
2011-12-01 15:50:37 +01:00
David A. Mellis
dca1dc429a
Removing Leonardo (and Mouse/Keyboard examples) for Arduino 1.0 release.
...
These will return, but the code isn't finished yet so I don't want to include it.
2011-11-28 18:47:45 -05:00
Cristian Maglie
037ecd3e3e
Fixed 'shaking' readings from ADC/ADC12
2011-11-27 19:15:33 +01:00
David A. Mellis
3df132aea9
Correcting Arduino Mini w/ ATmega328 bootloader file and fuses (untested).
2011-11-25 19:26:01 -06:00
Cristian Maglie
c8ec267d0b
Bugfix UARTClass
2011-11-23 23:15:13 +01:00
Thibaut VIARD
5c88944e39
[sam] fixing analog by adding ADC channel information into variant
2011-11-23 18:54:49 +01:00
Thibaut VIARD
3259609a71
[sam] updating CMSIS matching patch delivered by ARM today
2011-11-23 09:03:05 +01:00
Cristian Maglie
05b3c0cc85
USB: removed some include file to let core compile again
2011-11-21 18:32:21 +01:00
Cristian Maglie
59f68ab4ec
Added USB lib from arduino repository (as-is, work in progress).
2011-11-21 18:19:39 +01:00
Cristian Maglie
1c9738e3db
Fix syntax error on wiring_analog
2011-11-21 13:15:00 +01:00
Thibaut VIARD
f77fcec4e9
[sam] fixing typo in comment
2011-11-21 12:18:21 +01:00
Thibaut VIARD
7cbb284eb4
[sam] fixing analog on Due, normally
2011-11-21 12:16:54 +01:00
David A. Mellis
ed48d17e20
readBytes() and readBytesUntil() handle zero bytes and return # of bytes read.
...
http://code.google.com/p/arduino/issues/detail?id=586
2011-11-19 16:23:19 -05:00
David A. Mellis
4119b9089b
Adding Arduino Mini w/ ATmega328.
...
http://code.google.com/p/arduino/issues/detail?id=710
2011-11-19 16:22:46 -05:00
Cristian Maglie
062278262d
Merge branch 'uart-fix' into new-extension
...
Conflicts:
hardware/sam/cores/sam/Arduino.h
2011-11-18 11:55:03 +01:00
Cristian Maglie
bd9da76fbe
Include libsam headers as external "C"-decl
2011-11-18 11:32:28 +01:00
Thibaut VIARD
cd94333c41
[sam] fixing GCC linker scripts
2011-11-17 17:20:39 +01:00
Thibaut VIARD
7b5228310b
[sam] updating headers and getting the branch back to work
2011-11-17 16:56:47 +01:00
Cristian Maglie
713cf88328
Removed disabled file
2011-11-17 09:13:25 +01:00
Cristian Maglie
3b0a174f2c
Pulse API ported.
2011-11-16 23:53:46 +01:00
Zach Eveland
75eb722759
Leonardo bootloader now sends iSerial string during enumeration. Seems to satisfy Windows' composite device requirements.
2011-11-16 16:38:22 -05:00
Zach Eveland
9b58072423
Fixed size of const array mapping digital pin number to bit mask.
2011-11-16 12:15:57 -05:00
Zach Eveland
21ee685489
Updated digital pin and port mapping constants in pins_arduino.h for Leonardo.
...
Changed digital_pin_to_port_PGM[] and digital_pin_to_bit_mask_PGM[] to reflect changes to constants for SPI and analog pins
2011-11-16 11:20:38 -05:00
Zach Eveland
5f574b3634
Swapped Dx assignment for MISO and SS to make numbering more sane (Dave Mellis). Also updated comments on pin numbers.
2011-11-16 11:00:21 -05:00
Zach Eveland
ba5d66c26f
Fixed handling of Ax constants on Leonardo
...
Fixed mistake in assignment and handling of A6-A11 constants. Renumbered constants for all Ax channels.
2011-11-16 10:49:41 -05:00
Zach Eveland
3ee847c8e2
updated pins_arduino.h for Leonardo to reflect final mapping of A6-A11
2011-11-15 09:48:09 -05:00
Zach Eveland
56d06e15ed
Merge branch 'new-extension' of github.com:arduino/Arduino into new-extension
2011-11-15 09:33:11 -05:00
Cristian Maglie
08adc54377
UARTClass fix for only-first-char-sent issue.
2011-11-14 13:17:38 +01:00
Cristian Maglie
6ceb9a19de
Added latest firmware for usbserial (not combined with DFU)
2011-11-12 12:57:30 +01:00
Cristian Maglie
24fab0b41e
Merge remote-tracking branch 'origin/new-extension' into new-extension
2011-11-12 01:16:58 +01:00
Cristian Maglie
e8b62b34c8
Wire library completed (slave mode now works)
2011-11-12 01:16:51 +01:00
Cristian Maglie
17adbbcfc5
Added latest firmware for atmega16u2 on R3 boards
2011-11-11 11:38:04 -05:00
Zach Eveland
cd6aa2b1f3
restored original non-interrupt-driven DiskLoader
...
Interrupt-driven version was a dead-end - too many bugs with that approach.
2011-11-09 14:04:59 -05:00
Zach Eveland
f0801e61e6
updated analog pin assignments and declared TWI/I2C pins
...
Fixed analog pin to ADC channel mapping to match new scheme. Changed mapping of analog pins to digital channels so that A6-A11 point back to the correct digital pins. Declared SDA and SCL pins.
(All from Federico Vanzati's comments)
2011-11-08 22:06:15 -05:00
Thibaut VIARD
6f0d102a36
[sam] merging with latest headers delivery
2011-11-07 16:49:51 +01:00
Cristian Maglie
eef7c78506
Wire library: fixed Master-mode
2011-11-06 14:00:02 +01:00
Zach Eveland
42fadb6f6d
added 12th ADC channel for Leonardo. cleaned up and corrected comments for pin functions.
2011-11-02 07:37:39 -04:00
Zach Eveland
c8f495ba7f
changed Leonardo PID to 0x0032 for Diskloader testing. updated .inf to match.
2011-10-31 23:44:32 -04:00
Zach Eveland
76ed870de8
Merge branch 'new-extension' of github.com:arduino/Arduino into diskloader_reboot
2011-10-31 21:42:09 -04:00
Zach Eveland
4a77aea4e5
check to see if a sketch has been loaded before jumping out of bootloader
2011-10-31 21:36:29 -04:00
David A. Mellis
10001866e6
Protecting the version of parseInt() and parseFloat(). (Paul Stoffregen)
...
This should allow us more flexibility in determining how to handle these functions later. For example, in specifying that initial characters shouldn't be skipped.
http://code.google.com/p/arduino/issues/detail?id=698
2011-10-29 17:40:23 -04:00
Cristian Maglie
5f7837cc02
Small fix PINS_USART*
2011-10-27 18:33:58 +02:00
Cristian Maglie
8d83eb79a9
Merge remote-tracking branch 'origin/new-extension' into new-extension
2011-10-27 18:28:27 +02:00
Cristian Maglie
6a3595a99e
Rearranged pins array in variant.cpp
2011-10-27 18:27:19 +02:00
Zach Eveland
a6381bb564
renamed bootloader file
2011-10-27 11:52:10 -04:00
Zach Eveland
a6a59f1783
Revert "Merge branch 'master' of github.com:arduino/Arduino into diskloader_reboot"
...
This reverts commit df9835efafec45af8bfa
2011-10-27 11:45:13 -04:00
Zach Eveland
f2bd8a5394
Merge branch 'new-extension' of github.com:arduino/Arduino into diskloader_reboot
...
Conflicts:
hardware/arduino/variants/mega/pins_arduino.h
libraries/Ethernet/examples/PachubeClient/PachubeClient.ino
libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
2011-10-27 11:41:02 -04:00
Zach Eveland
03e1515a51
changes in core and boards.txt to support new bootloader
...
old bootloader could fit in only 2 kB of flash. new version has to have a 4 kB block - jump-to address and boards.txt must reflect this.
2011-10-27 11:36:10 -04:00
Zach Eveland
be51da6b0d
bootloader runs sketch after timeout, added bootloader LED breathing
2011-10-27 11:27:24 -04:00
Zach Eveland
b70f79ea2c
cosmetic changes - remove old comments, unused code
2011-10-27 10:54:21 -04:00
Zach Eveland
040a469f79
removed conditional compilation checks for CDC_ENABLED
...
bootloader must always have CDC enabled
2011-10-27 10:48:26 -04:00
Zach Eveland
9dc9e60704
removed old comments and unused USB core code
2011-10-27 10:45:13 -04:00
Zach Eveland
3d848a5b9a
brought nuevo_diskloader changes over to diskloader
...
Moved nuevo_diskloader files into diskloader directory. Changed back to real PID for Leonardo
2011-10-27 10:23:06 -04:00
Zach Eveland
df9835efaf
Merge branch 'master' of github.com:arduino/Arduino into diskloader_reboot
...
Conflicts:
app/src/processing/app/Editor.java
app/src/processing/app/Sketch.java
build/shared/examples/4.Communication/SerialCallResponse/SerialCallResponse.pde
build/shared/lib/theme/theme.txt
hardware/arduino/cores/arduino/HardwareSerial.h
hardware/arduino/cores/arduino/Print.cpp
hardware/arduino/cores/arduino/WString.h
hardware/arduino/variants/mega/pins_arduino.h
libraries/Ethernet/examples/PachubeClient/PachubeClient.ino
libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
libraries/Firmata/examples/EchoString/EchoString.ino
libraries/SD/File.cpp
libraries/SoftwareSerial/SoftwareSerial.cpp
libraries/SoftwareSerial/SoftwareSerial.h
libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
libraries/SoftwareSerial/keywords.txt
2011-10-27 09:32:27 -04:00
Zach Eveland
ec45af8bfa
working bootloader. had to move interrupts back to application section. NOTE: need to have sketch CDC jump to appropriate place for bootloader - 4k from end instead of 2k
2011-10-26 16:51:42 -04:00
Thibaut VIARD
538f548ec1
[sam] merging with state-of-the-art cmsis sam3 package
2011-10-26 19:48:57 +02:00
Zach Eveland
32614bf841
working (?!?!?!) bootloader. doesn't yet restart chip after upload completes.
2011-10-26 12:53:57 -04:00
Thibaut VIARD
bb09067262
[sam] merging CMSIS with ARM delivery v2.10 patch2
2011-10-26 17:44:44 +02:00
Zach Eveland
e806be8c2a
uploading now completes using RC2 on Win7
2011-10-26 11:28:07 -04:00
Zach Eveland
9e72b06a75
closer still - now up to 4680
2011-10-25 19:04:31 -04:00
Zach Eveland
d50b95eac1
progress on bootloader bug - have implemented blocking USB_Recv. avrdude makes it to flash programming address 0400 or so before hanging
2011-10-25 18:56:10 -04:00
Thibaut VIARD
a6fc1bf373
[sam] removing wrong SPI example
2011-10-25 19:18:27 +02:00
Thibaut VIARD
43106fddc6
[sam] adding Arduino license to makefiles
2011-10-25 19:16:01 +02:00
David A. Mellis
d9f9676d23
Bug fix in replace().
...
http://code.google.com/p/arduino/issues/detail?id=694
2011-10-25 11:15:14 -04:00
Thibaut VIARD
f62f013d3a
[sam] modifying some files to obtain the right license
2011-10-25 16:19:43 +02:00
Thibaut VIARD
276938707c
[sam] adding sam3 adc driver
2011-10-25 15:52:09 +02:00
Cristian Maglie
d66490787b
Added Wire lib for ARM
2011-10-25 14:33:40 +02:00
Cristian Maglie
278976a587
Removed Wire lib for AVR
2011-10-25 14:33:13 +02:00
Zach Eveland
cca9401589
fixed logic bug in waiting for synch. stripped out all Serial stuff
2011-10-24 22:12:45 -04:00
Zach Eveland
55178d9b8d
removed old comments
2011-10-24 21:36:06 -04:00
David A. Mellis
f729e0321b
Moving ARDUINO_MAIN from main.cpp to wiring_digital.c and hiding PA, PB, etc.
...
http://code.google.com/p/arduino/issues/detail?id=677
http://code.google.com/p/arduino/issues/detail?id=691
2011-10-24 16:50:15 -04:00
David A. Mellis
18838fb44a
Renaming LED to LED_BUILTIN.
...
http://code.google.com/p/arduino/issues/detail?id=651
2011-10-24 16:45:44 -04:00
David A. Mellis
8336c88211
Correcting analogReference() constants for ATtiny24/44/84 and 25/45/85.
...
DEFAULT, EXTERNAL, and INTERNAL have different values on those processors.
2011-10-24 15:44:01 -04:00
Cristian Maglie
7684a2fe85
Libraries search path now include platform specific versions
2011-10-24 11:58:52 +02:00
Zach Eveland
3e775af6d8
bootloader responds properly now. nearly there - still have an issue with it falling out of sync after completing most operations
2011-10-23 16:49:36 -04:00
Zach Eveland
fa26e288a5
more attempts to get parameter sending to work
2011-10-21 20:30:55 -04:00
Zach Eveland
44b90b9f6a
some progress on responding to parameter requests
2011-10-21 20:06:17 -04:00
Zach Eveland
79dbae2eb7
avrdude communication starting to work - responds to sync, fails when trying to respond to STK_GET_PARAMETER
2011-10-21 19:36:53 -04:00
Zach Eveland
e12b578462
continuing to port programming code. temporarily changed PID to test on Windows (it works)
2011-10-21 18:21:04 -04:00
Zach Eveland
6ca5bf3acb
starting to port bootloader programming code - testing as I go
2011-10-21 18:03:34 -04:00
Zach Eveland
2d8ced65d1
added and modified Program() routine
2011-10-21 17:51:04 -04:00
Zach Eveland
0dc5f19ea9
cleaning up code and comments in main - getting rid of leftover stuff from experiments
2011-10-21 17:25:59 -04:00
Zach Eveland
f59451b04d
Enumerates! used inline ASM for operation which moves interrupts to boot section
2011-10-21 17:16:48 -04:00
Zach Eveland
2f46c2a6e6
can now enable interrupts but EORSTE or SOFE in USB_::attach() still cause bootloader to hang
2011-10-21 16:51:25 -04:00
Zach Eveland
bc669c14f8
added more USB source adapted from sketch core. still not enumerating.
2011-10-21 16:33:52 -04:00
David A. Mellis
ec09ead6ac
Lowering timer 1 prescale factor (to 8 from 64) for F_CPU less than 8 MHz.
...
Otherwise, you can see flicker on an LED.
2011-10-21 11:54:11 -04:00
Zach Eveland
b86ce43044
initial commit of new Diskloader-based bootloader experiment
2011-10-21 08:02:17 -04:00
Cristian Maglie
bc76145d4b
Rapid fix USARTClass inclusion issue.
2011-10-16 22:19:47 +04:30
Thibaut VIARD
daa9aa442b
[sam] fixing due variant issue and preparing work on analog
2011-10-14 10:30:25 +02:00
Thibaut VIARD
8f8ce634dc
[sam] adding untested production test firmware
2011-10-11 20:48:07 +02:00
Thibaut VIARD
ee7177d68b
[sam] merging CMSIS with current internal dev
2011-10-11 20:46:18 +02:00
David A. Mellis
e7ff928762
Putting the Uno lock bits back.
2011-10-10 12:28:09 -04:00
WestfW
8efc3920f9
Explicitly set the SHELL variable when OS=windows, so that we'll use
...
the same shell regardless of whether other shells are installed
(different shells have different behavior WRT directory component
separators, so this matters.
http://code.google.com/p/arduino/issues/detail?id=667 )
(cherry picked from commit fc8cacb9a3
2011-10-10 12:11:18 -04:00
WestfW
de4d73511d
Oops. Add atmega8.lst/hex and atmega168.lst/hex to controlled files.
...
(cherry picked from commit c56a1293d7
2011-10-10 12:11:18 -04:00
WestfW
b2c43c2e55
Allow the READ PARAMETER command to return our version number.
...
(significant size impact: 14 bytes!)
Initialized "address" to eliminate compiler warning (4 bytes!)
Add "atmega168" as a more accurate target name than "diecimila"
(keep diecimila as well for backward compatibility)
Reduce the .hex and .lst targets that are stored in source control
to the three basics: atmega8, atmega168, atmega328. The other
targets remain in the makefile and makeall, but will need to be
built from source if wanted. Which should be less of a problem
now that the source is buildable without installing crosspack.
(cherry picked from commit 7b1ee0f1b0
2011-10-10 12:11:17 -04:00
WestfW
61e4d16675
Modify Uno "lock" bits in boards.txt to make bootloader readable by
...
sketches. Part of http://code.google.com/p/arduino/issues/detail?id=554
(cherry picked from commit 39a496616f
2011-10-10 12:11:17 -04:00
WestfW
a57d315e4b
http://code.google.com/p/arduino/issues/detail?id=368
...
Optiboot does not support ArduinoasISP programmer.
When avrdude runs and talks to an arduino running ArduinoISP,
it needs the optiboot (entered due to auto-reset) to abort and
start the ArduinoISP "application" when it sees communications
at the wrong serial speed. Unfortunately, optiboot treats all
unrecognized command characters as "no-ops" and responds/loops
for more commands, leading to a nice loop that never gets to
the sketch. This patch causes characters received with Framing
errors (the most likely error for speed mis-matches) to NOT
reset the watchdog timer (normally done in getch()), which will
cause the application to start if it continues for "a while."
(tested. Works! Running ArduinoISP at speeds as high as 57600
still causes the bootloader to start the sketch (although it fails
later on for other reasons.))
(cherry picked from commit e81c1123b6
2011-10-10 12:11:16 -04:00
WestfW
1bbded4f34
(make sure .hex and .lst are updated as well.)
...
(cherry picked from commit ece29c3805
2011-10-10 12:11:16 -04:00
WestfW
091dc9a7f9
Fix errors in LDSECTIONS refactoring
...
(found during atmega8 testing.)
(cherry picked from commit 422398e08c
2011-10-10 12:11:16 -04:00
WestfW
93f7515ecf
Update version to reflect previous edit. Sigh.
...
(cherry picked from commit e28b716f88
2011-10-10 12:11:15 -04:00
WestfW
07a88dc998
Shrink code by using registers for variables "length" and "address"
...
http://code.google.com/p/optiboot/issues/detail?id=33
Fix high-value watchdog timeouts on ATmega8
http://code.google.com/p/optiboot/issues/detail?id=38
Change "start app on bad commands" code to start the app via the
watchdog timer, so that the app is always started with the chip
in fully reset state.
http://code.google.com/p/optiboot/issues/detail?id=37
(cherry picked from commit 6f7687b0f9
2011-10-10 12:11:15 -04:00
WestfW
10019bb0df
Add a version number to the optiboot source and binary.
...
http://code.google.com/p/arduino/issues/detail?id=554
end of flash memory where they can be read (at least in theory) by
device programmers, hex-file examination, or application programs.
This is done by putting the version number in a separate section
(".version"), and using linker/objcopy magic to locate that section as
appropriate for the target chip. (See
http://lists.gnu.org/archive/html/avr-gcc-list/2011-02/msg00016.html
for some discussion on the details.)
Start the version at 4.1 (the last "packaged" version of optiboot was
called version 3, so the "top of source" would be 4.0, and adding the
version number makes 4.1)
Refactor LDSECTION in the Makefile to LDSECTIONS so that multiple
section start addresses can be defined.
Change the _isp makefile definitions to make the bootloader section
readable (but not writable) by the application section. (This would
need to be done elsewhere as well to handle all bootloader programming
techniques. Notably Arduino's boards.txt
Note that this change does not change the "code" portion of optiboot
at all. The only diffs in the .hex files are the added version word
at the end of flash memory.
(cherry picked from commit 00706284de
2011-10-10 12:11:15 -04:00
WestfW
287aae6b42
Update shell script makeall
...
(cherry picked from commit d4632cb095
2011-10-10 12:11:14 -04:00
WestfW
92e746d0a5
This is a relatively significant edit that brings the Arduino copy of
...
optiboot up-to-date with the optiboot source repository as of Jun-2011
(the last changes made in the optiboot repository were in Oct-2010)
This adds support for several plaforms, fixes the "30k bug", and
refactors the source to have separate stk500.h, boot.h, and pin_defs.h
These are the arduino opticode issues fixed:
http://code.google.com/p/arduino/issues/detail?id=380
optiboot has problems upload sketches bigger than 30 KB
http://code.google.com/p/arduino/issues/detail?id=556
update optiboot to the point of the latest optiboot project sources.
These are issues that had been solved in the optiboot source aready:
http://code.google.com/p/arduino/issues/detail?id=364
optiboot leaves timer1 configured when starting app, breaks PWM on
pin 9 and 10. (fixed with a workaround in arduino core.)
aka http://code.google.com/p/optiboot/source/detail?r=c778fbe72df6ac13ef730c25283358c3c970f73e
Support for ATmega8 and mega88.
Fix fuse settings for mega168 _ISP targets
Additional new platforms (mega, sanguino)
http://code.google.com/p/optiboot/issues/detail?id=26
Set R1 to 0 (already in arduino code)
http://code.google.com/p/optiboot/issues/detail?id=36&can=1
Fails to build correctly for mega88
After this commit, the only differences between the Arduino optiboot.c
and the optiboot repository optiboot.c are cosmetic.
(cherry picked from commit e2812ef91c
2011-10-10 12:11:14 -04:00
WestfW
72e425a41d
http://code.google.com/p/arduino/issues/detail?id=517
...
Remove the trailing comments when setting fuse values for the various
*_isp targets, so that they won't cause avrdude errors.
This was done the same way as in the optiboot source tree:
http://code.google.com/p/optiboot/issues/detail?id=17
http://code.google.com/p/optiboot/source/detail?r=005fb033fc08c551b2f86f7c90c5db21549b3f20
(cherry picked from commit 6840b77643
2011-10-10 12:11:14 -04:00
WestfW
11b2d86ff1
Makefile modification to allow building optiboot in more environments.
...
Allows building within the Arduino Source tree, and within the Arduino
IDE tree, as well as using CrossPack on Mac.
Adds README.TXT to track arduino-specific changes (and documents the
new build options.)
This addresses Arduino issue:
http://code.google.com/p/arduino/issues/detail?id=487
And optiboot issue
http://code.google.com/p/optiboot/issues/detail?id=1
(which can be thought of as a subset of the Arduno issue.)
Note that the binaries produced after these Makefile changes (using any
of the compile environments) are identical to those produced by the
crosspack-20100115 environment on a Mac.
(cherry picked from commit 2d2ed324b4
2011-10-10 12:11:13 -04:00
David A. Mellis
f093cc6970
Merge pull request #30 from WestfW/master
...
Significant optiboot upgrade.
2011-10-10 09:01:56 -07:00
David A. Mellis
a08657b350
Moving USBasp in programmers menu.
2011-10-10 11:58:38 -04:00
David A. Mellis
2ffad50619
Merge pull request #41 from chiva/patch-1
...
Added USBasp to programmers list
2011-10-10 08:56:15 -07:00
David A. Mellis
ca671fdc05
Fixing more warnings (Paul Stoffregen).
2011-10-10 11:28:44 -04:00
Cristian Maglie
2699d5d001
Disabled pio_it.c until fixed..
2011-10-06 02:03:07 +02:00
Cristian Maglie
cb92a1d402
Added upload with bossac
2011-10-06 01:58:38 +02:00
Thibaut VIARD
a33fb50d92
[sam] Modifying license in sam dedicated files
2011-10-05 13:25:22 +02:00
WestfW
fc8cacb9a3
Explicitly set the SHELL variable when OS=windows, so that we'll use
...
the same shell regardless of whether other shells are installed
(different shells have different behavior WRT directory component
separators, so this matters.
http://code.google.com/p/arduino/issues/detail?id=667 )
2011-10-05 01:41:03 -07:00
David A. Mellis
85c109f255
Fixing warnings in Stream (Paul Stoffregen)
...
http://code.google.com/p/arduino/issues/detail?id=208
2011-10-02 09:44:21 -04:00
David A. Mellis
6554ae653c
Using alternate timer 0 overflow interrupt signal name for ATtiny24/44/84.
2011-09-30 11:24:44 -04:00
David A. Mellis
bd823bf201
Changing Ethernet upload protocol from stk500 to arduino.
...
http://code.google.com/p/arduino/issues/detail?id=649
2011-09-28 23:26:37 -04:00
Cristian Maglie
3681035869
IDE: various refactoring to make sam hardware compiling.
2011-09-23 04:47:41 +02:00
Cristian Maglie
02c76ff87b
Merge remote-tracking branch 'origin/new-extension' into HEAD
2011-09-20 22:41:18 +02:00
David A. Mellis
de22990133
Updating bootloader comments.
2011-09-16 20:31:41 -04:00
David A. Mellis
df2270d4d5
Commenting out micro board for now since it's not being released yet.
2011-09-16 20:26:43 -04:00
David A. Mellis
19d7d4b066
Updating Micro bootloader (previous one was identical to Leonardo).
2011-09-16 18:25:59 -04:00
Cristian Maglie
bd7e6d89d5
Compilation process for ARM (WIP)
2011-09-17 00:02:40 +02:00
Thibaut VIARD
ac4b087eb0
[sam] renaming unused files and ensure that test app works on Due
2011-09-16 23:51:04 +02:00
Thibaut VIARD
8716884ada
[sam] moving files from variants/common to cores/sam
2011-09-16 23:13:28 +02:00
Thibaut VIARD
04432caacd
[sam] UART/USART write(char) working and cmsis update
2011-09-16 23:07:44 +02:00
Zach Eveland
d532d85059
added Mouse.isPressed() method
2011-09-16 16:59:14 -04:00
Zach Eveland
00c3631467
made some Keyboard methods private
2011-09-16 16:43:07 -04:00
Zach Eveland
30fc9919e1
added support for TIMER4D used for PWM on Leonardo and Micro D6
2011-09-16 16:36:42 -04:00
Zach Eveland
b898a35f76
new bootloader binaries for Micro and Leonardo - uses new assignment for TXLED pin
2011-09-16 16:24:21 -04:00
Zach Eveland
a4ccf47ec7
updated pin assignment again based on design files for Leonardo
2011-09-16 16:12:39 -04:00
Zach Eveland
23d0d05844
updated pin mappings for bootloader and pins_arduino.h in anticipation of final hardware.
2011-09-16 15:46:51 -04:00
Zach Eveland
8638d5b4e9
restored accidentally-deleted Leonardo type in boards.txt
2011-09-16 14:54:42 -04:00
Zach Eveland
75cfefcd0a
restored Micro entry in boards.txt, made separate bootloader images for Leonardo and Micro.
2011-09-16 14:47:42 -04:00
Zach Eveland
cd5ecfff1c
Merge https://github.com/arduino/32U4 into new-extension
2011-09-16 14:34:55 -04:00
Zach Eveland
667da698d7
added automatic one-shot TX and RX LED control for sketch USB
2011-09-16 14:32:25 -04:00
David A. Mellis
5ec35fc68c
Moving Leonardo after Uno.
2011-09-16 14:24:11 -04:00
Zach Eveland
6b7d24edb0
added to sketch iProduct and iManufacturer strings identifying board as either an "Arduino Leonardo" or "Arduino Micro" manufactured by "Arduino LLC"
2011-09-16 12:29:47 -04:00
Zach Eveland
4452de6eaa
bootloader iProduct definition changed to "Arduino Leonardo Bootloader" or "Arduino Micro Bootloader". selection depends on PID passed in at compile time
2011-09-16 12:09:51 -04:00
Zach Eveland
66b484e53e
added to the bootloader iProduct and iManufacturer strings identifying board as an "Arduino Leonardo" manufactured by "Arduino LLC"
2011-09-16 11:56:33 -04:00
Zach Eveland
6bbc7b2db7
faster LED breathing animation in bootloader
2011-09-16 11:18:39 -04:00
Zach Eveland
ab8fc5aab7
Merge branch 'new-extension' of https://github.com/arduino/Arduino into new-extension
2011-09-16 10:27:11 -04:00
Santiago Reig
90f285ae9c
Added USBasp to programmers list
2011-09-16 01:56:22 +03:00
Thibaut VIARD
d1d60447e9
[sam] adding sam3u-ek and arduino due for IDE
2011-09-14 19:32:41 +02:00
Zach Eveland
d4e9db463b
fixed analog pin mapping for 32u4
2011-09-13 23:52:26 -04:00
Zach Eveland
18d76057fe
fixed Mouse button assignments
2011-09-13 21:37:46 -04:00
Thibaut VIARD
80d5368b52
[sam] LED Blink test app working on Arduino Due
2011-09-13 18:12:51 +02:00
Thibaut VIARD
6f2d59ed2f
[sam] adding variant definition for Due
2011-09-13 17:01:32 +02:00
Thibaut VIARD
b014d9eacd
[sam] led blink working on SAM3U-EK using validation app
2011-09-13 11:18:38 +02:00
Thibaut VIARD
d287bba7d1
[sam] ready for sam3u debug on sam3u-ek
2011-09-12 18:43:26 +02:00
Thibaut VIARD
bc253722a6
[sam] PIO and PMC drivers adapted to enable SAM3U compilation, makefiles prepared for SAM3U-EK and Due
2011-09-12 18:01:48 +02:00
Thibaut VIARD
5d92281c3c
[sam] integrating ARM CMSIS patch for DSPLib
2011-09-12 17:52:55 +02:00
Zach Eveland
e3fa1ed039
made Mouse.buttons() private. removed MOUSE_ALL macro
2011-09-12 08:14:13 -04:00
Thibaut VIARD
19b2218df4
[sam] introducing sam3u-ek and arduino due into variants, libsam is broken
2011-09-12 01:55:10 +02:00
Thibaut VIARD
0c2bba55c8
[sam] test app (led blink) working using GCC and GDB server for debug
2011-09-10 23:54:56 +02:00
Thibaut VIARD
2963a37075
[sam] adding HOWTO for whole projects compilation
2011-09-10 23:37:23 +02:00
David A. Mellis
f3d8628c5e
Don't consume trailing char in parseInt() and parseFloat (Paul Stoffregen).
...
http://code.google.com/p/arduino/issues/detail?id=624
2011-09-09 16:24:47 -04:00
Thibaut VIARD
79ee7a1f6a
[sam] daily commit: EWARM project working, GCC compiling but fail due to missing match for Reset_Handler
2011-09-09 19:15:21 +02:00
Zach Eveland
6f65578b99
updated Leonardo INF with correct PID and created new Micro INF.
2011-09-08 20:45:10 -04:00
Zach Eveland
b1c8d0be34
in bootloader reduced delay between receiving stk500 'Q' and jumping to application
2011-09-08 20:38:23 -04:00
Zach Eveland
94879d3ac6
Merge branch 'new-extension' of https://github.com/arduino/Arduino into new-extension
...
Conflicts:
build/linux/dist/tools/avrdude.conf
2011-09-08 20:26:47 -04:00
Zach Eveland
db7013f95c
fixed bug where sketches over 28k caused subsequent auto-reset-and-upload attempts to fail. fixed bug in reboot routine, changed fuses to select 1024-word bootloader size, disabled hardware boot enable.
2011-09-08 19:31:18 -04:00
Zach Eveland
c0b45364b8
disabling watchdog in bootloader
2011-09-08 18:12:11 -04:00
Zach Eveland
11e3921c81
misc. bootloader fixes: increased wait time after receiving avrdude 'Q', increased bootloader timeout, and fixed LED one-shot timing
2011-09-08 16:23:29 -04:00
Zach Eveland
e870f070db
added compile-time definition of sketch PID. PID is pulled from variants/leonardo or the new variants/micro as appropriate.
2011-09-08 15:52:05 -04:00
Zach Eveland
508eb9b72f
removed leftover pins/ directory
2011-09-08 15:43:16 -04:00
Zach Eveland
301f1b8552
Revert "added Micro section to boards.txt. specified different bootloader hex files for Leonardo and Micro (differ only by PID). added PID entries to boards.txt"
...
This reverts commit 3b5122e138
2011-09-08 15:40:41 -04:00
Zach Eveland
c295917fad
Revert "support compile-time passing of PID to Leonardo/Micro sketches. PID comes from boards.txt - different for Micro and Leonardo"
...
This reverts commit 3e0d195492
2011-09-08 15:39:17 -04:00
Zach Eveland
3e0d195492
support compile-time passing of PID to Leonardo/Micro sketches. PID comes from boards.txt - different for Micro and Leonardo
2011-09-08 11:23:55 -04:00
Zach Eveland
3b5122e138
added Micro section to boards.txt. specified different bootloader hex files for Leonardo and Micro (differ only by PID). added PID entries to boards.txt
2011-09-08 11:00:40 -04:00
Zach Eveland
48212b11fd
changed PIDs for Leonardo and Micro. PIDs are now defined in the Makefile
2011-09-08 09:47:17 -04:00
Zach Eveland
4db174e67b
removed all bootloader mass storage and MSC references
2011-09-08 09:12:30 -04:00
Thibaut VIARD
3916472a36
[sam] Introducing preliminary files for Due and SAM3U-EK
2011-09-08 01:22:16 +02:00
Thibaut VIARD
a60e8d7236
[sam] Working LED Blink on variant SAM3S-EK using IAR EWARM
2011-09-08 01:17:26 +02:00
David A. Mellis
7d8d20894c
Making Print::write(char *) non-virtual.
...
http://code.google.com/p/arduino/issues/detail?id=607
2011-09-07 18:41:05 -04:00
David A. Mellis
ab36bd5dbb
Changing to a simpler mental model for serialEvent (Paul Stoffregen).
...
http://code.google.com/p/arduino/issues/detail?id=626
2011-09-07 17:47:17 -04:00
Thibaut VIARD
beefd467f9
[sam] deleting duplicate useless headers and renaming variant
2011-09-07 17:58:45 +02:00
Zach Eveland
fa901e2ba4
changed auto-reset trigger condition to fix auto-reset-and-upload for Windows. now reboots when a port, opened at 1200 bps, is closed.
2011-09-06 20:58:00 -04:00
Thibaut VIARD
a5d2349761
[sam] fixing last stupid commit
2011-09-06 21:05:41 +02:00
Thibaut VIARD
8f01f92e87
[sam] committing state-of-the-art code: compiling under EWARM 6.21.1 but debug not easy
2011-09-05 22:59:49 +02:00
Zach Eveland
5e058a8aa3
changed baudrate for auto-reset-and-upload back to 1200 bps. specified arduino protocol for Leonardo avrdude upload.
2011-09-05 13:08:05 -04:00
Zach Eveland
e24e9499cf
Merge branch 'new-extension' of https://github.com/arduino/Arduino into new-extension
...
Conflicts:
build/macosx/dist/tools-universal.zip
build/windows/avr_tools.zip
hardware/arduino/cores/arduino/HardwareSerial.cpp
2011-09-05 12:53:45 -04:00
David Mellis
83da177280
Merge branch 'new-extension' of github.com:arduino/Arduino into new-extension
2011-09-02 19:58:39 -04:00
David Mellis
85bf4252f0
Updating to avrdude 5.11 (Windows). stk500 -> arduino in boards.txt.
...
http://code.google.com/p/arduino/issues/detail?id=606
2011-09-02 19:57:29 -04:00
David A. Mellis
bf5e928e4c
Adding Arduino Ethernet and Arduino Mega ADK (joint w/ Mega 2560) to boards menu.
...
http://code.google.com/p/arduino/issues/detail?id=594
2011-08-31 16:48:06 -04:00
David A. Mellis
1278144d50
Moving serialEvent() calls from RX interrupts to main for() loop (after loop()).
...
http://code.google.com/p/arduino/issues/detail?id=584
2011-08-31 15:52:56 -04:00
David A. Mellis
61b33f11ce
Renaming writeError() to getWriteError() in Print (and Stream and friends).
...
http://code.google.com/p/arduino/issues/detail?id=608
2011-08-31 15:39:20 -04:00
Thibaut VIARD
bb4c1af790
[sam] adding up to date sam3s8 headers
2011-08-31 10:32:31 +02:00
Thibaut VIARD
08344ef892
[sam] adding up to date sam3x headers
2011-08-31 10:30:18 +02:00
Thibaut VIARD
48ebcf5b84
[sam] adding up to date sam3n headers
2011-08-31 10:29:53 +02:00
Thibaut VIARD
d09f81d623
[sam] adding up to date sam3u headers
2011-08-31 10:29:27 +02:00
Thibaut VIARD
b9935eb38c
[sam] adding up to date sam3s headers
2011-08-31 10:28:32 +02:00
Thibaut VIARD
5479b611ac
[sam] removing useless peripheral drivers and modifying validation build
2011-08-31 10:24:00 +02:00
Zach Eveland
3389d28e20
added Mouse press() and release()
2011-08-30 20:23:06 -04:00
Zach Eveland
7d26163b16
on a CDC or HID write() error, call setWriteError(). better handling of USB_Send errors in CDC.
2011-08-30 17:25:35 -04:00
amcewen
a6093a8d91
Created an abstract base class UDP to match the Client and Server classes, and reworked the Ethernet library to use it and derive EthernetUDP.
2011-08-30 21:27:31 +01:00
Zach Eveland
6049e4455a
support for non-Leonardo boards is back!
2011-08-30 11:50:08 -04:00
Zach Eveland
0b3acaea21
CDC and HID write() routines now return non-void - brought in line with new write behavior
2011-08-30 11:04:34 -04:00
Zach Eveland
0a34c0f35e
brought leonardo folder in line with new variants scheme
2011-08-30 10:45:41 -04:00
Zach Eveland
91f89da73a
Merge branch 'mainline' into new-extension
2011-08-30 08:38:06 -04:00
amcewen
ad5dead85a
Changed names of the Ethernet classes: Client -> EthernetClient, NetClient -> Client, and basic testing performed
2011-08-29 22:36:28 +01:00
amcewen
b7533c1839
Final changes to integrate latest core updates to WiFly branch
2011-08-28 22:26:07 +01:00
amcewen
e1748e79d7
Merge branch 'master' into wifly_integration
2011-08-28 20:28:53 +01:00
Zach Eveland
6345e2942a
auto-upload-and-reset works now at 300 bps. patched avrdude for Mac to support 300 bps connection, changed core and boards.txt to match
2011-08-27 20:32:34 -04:00
amcewen
4588120106
Merge branch 'new-extension' of https://github.com/arduino/Arduino
2011-08-27 23:53:42 +01:00
Zach Eveland
bef7d736d2
bootloader ends as soon as sketch upload finishes. restored pulsing of LED while bootloader running.
2011-08-27 07:00:07 -04:00
David A. Mellis
b73cf39d94
Moving write errors out of return value into separate API methods.
...
write(), print(), println() now return size_t (and don't use negative values to signal errors).
Print adds writeError() for checking for write errors, clearWriteError() to reset the flag to false, and a protected setWriteError() for signalling errors.
http://code.google.com/p/arduino/issues/detail?id=598
2011-08-26 16:08:14 -04:00
David A. Mellis
929597375b
Changing from long to ssize_t (int) for write(), print(), println() return.
2011-08-26 14:20:41 -04:00
Zach Eveland
eebe997dce
bugfix - Serial.write() would try to send even if no CDC connection was open.
2011-08-24 21:04:30 -04:00
Zach Eveland
ff5fe87864
changed auto-reset method for upload: now triggered by opening port at 1200 bps
2011-08-24 17:12:28 -04:00
David A. Mellis
8059abe581
write(), print(), and println() now return number of bytes written.
...
The type is long, and negative values indicate errors. Needs more testing.
http://code.google.com/p/arduino/issues/detail?id=551
2011-08-23 19:12:03 -04:00
David A. Mellis
b788ad593f
Distinguishing those boards with eight analog inputs (Fio, BT, Nano, Mini).
...
http://code.google.com/p/arduino/issues/detail?id=499
2011-08-23 17:29:20 -04:00
David A. Mellis
d00f0949ed
Renaming pins/ directory to the more generic variants/
...
http://code.google.com/p/arduino/issues/detail?id=588
2011-08-23 17:07:39 -04:00
Zach Eveland
dd539bacf8
USB microcontrollers will call USB.attach() after init(), before setup()
2011-08-18 19:59:35 -04:00
Zach Eveland
5b989d13b3
HW Serial on pins 0 and 1 works. Accessed by Serial1.* methods
2011-08-18 19:40:04 -04:00
David A. Mellis
4b0a87b405
Stream.readBytesUntil() now writes null terminator within length.
2011-08-18 15:13:47 -04:00
David A. Mellis
cb39ad9739
A few API changes to new Stream parsing functions.
...
Renamed readChars() -> readBytes(), readCharsUntil() -> readBytesUntil().
Changed timeouts to milliseconds from seconds; default from 5 to 1 seconds.
Removed readCharsBetween().
2011-08-17 14:16:47 -04:00
David A. Mellis
682b58e577
Integrating Stream searching & parsing (Michael Margolis)
...
This from Michael's TextFinder library, incorporated into the Stream class: find(), findUntil(), parseInt(), parseFloat(), readChars(), readCharsUntil(), readCharsBetween(), setTimeout().
2011-08-17 13:53:49 -04:00
Zach Eveland
e3848670a7
Temporary fix for auto-reset from IDE. Will reset chip when DTR is asserted, no matter what CDC baud rate is selected.
2011-08-16 13:43:55 -04:00
Zach Eveland
3f6df054ee
Serial via USB works
...
Integrated rest of Peter's USB implementation
2011-08-14 16:59:34 -04:00
Zach Eveland
e254d2989d
LEDs for D13, TX, and RX are more in line with Uno-like behavior during sketch uploading.
...
D13 flashes on reboot, TX and RX flash with USB data transfer.
2011-08-14 16:02:16 -04:00
Zach Eveland
c149be22f7
rebuilt Diskloader, added LED control macros for Leonardo, removed Microtouch defines
2011-08-14 15:11:23 -04:00
Zach Eveland
13a269df2e
increased bootloader delay to approx. 3.5 s
2011-08-14 14:29:44 -04:00
David A. Mellis
d338f22bde
Adding basic macros for analog + digital pin information.
...
http://code.google.com/p/arduino/issues/detail?id=495
2011-08-12 18:27:00 -04:00
David A. Mellis
f179794a45
Adding pin-change interrupt pin mapping macros to pins_arduino.h.
...
http://code.google.com/p/arduino/issues/detail?id=490
2011-08-12 17:31:22 -04:00
David A. Mellis
f14fd94d0e
Adding SCL, SDA, and LED #defines.
2011-08-12 16:59:24 -04:00
Zach Eveland
213091f487
cleaned up types. set D5 as not a PWM pin for now.
2011-08-11 14:16:13 -04:00
Zach Eveland
9b954df303
committed USB API, initial HardwareSerial-USBSerial integration
2011-08-11 14:08:38 -04:00
Zach Eveland
0ecdd723cf
diskloader source and binary for 32u4
2011-08-11 10:31:39 -04:00
Zach Eveland
cdf887b10b
support for 32u4 and Leonardo pins, uploading, and bootloader programming
2011-08-10 23:36:36 -04:00
Thibaut VIARD
2260c6875d
[sam] Adding CMSIS 2.10
2011-08-08 16:58:06 +02:00
Thibaut VIARD
32f3cf5734
[sam] removing CMSIS 2.0 before introduction of 2.1
2011-08-08 16:47:13 +02:00
David A. Mellis
d9dcc66232
[sam] fixing compilation in IDE (changing some #includes).
2011-07-17 09:50:36 -04:00
aethaniel
25e3924dda
[sam] Implementing timings and delay functions
2011-07-14 01:18:08 +02:00
aethaniel
2713ec4dca
[sam] Fixing wrong reference to Wait() and some cosmetics
2011-07-14 00:10:48 +02:00
aethaniel
3707a81640
[sam] fixing pure virtual link errors
2011-07-13 23:59:20 +02:00
aethaniel
6c6038f81a
[sam] adding wiring_digital and validation app
2011-07-13 01:20:40 +02:00
aethaniel
03c064e946
[sam] state-of-the-art commit
2011-07-11 01:51:24 +02:00
aethaniel
ef4abb62b0
[sam] adding libraries into hw/core/sam
2011-07-10 12:18:38 +02:00
aethaniel
e1912bf9bd
[sam] modified files following previous push
2011-07-10 12:16:31 +02:00
aethaniel
5df1f6c7dc
[sam] removing old cmsis folder
2011-07-10 12:15:06 +02:00
aethaniel
43b599ddfb
[sam] adding CMSIS 2.00 release to obtain benefit of DSPLib
2011-07-10 11:56:19 +02:00
David A. Mellis
c93fd746c4
Disabling terminal / monitor.
2011-06-29 22:48:07 -04:00
David A. Mellis
d1e8402cbc
Adding additional files.
2011-06-25 12:53:35 -04:00
David A. Mellis
05d622f3ac
Adapting Rick's platform work to other platform changes.
2011-06-25 12:51:56 -04:00
David A. Mellis
486e14aae3
Fixing linker command line argument.
2011-06-25 11:50:52 -04:00
David A. Mellis
7e1e9bfea2
Merge branch 'new-extension' into platforms
2011-06-25 11:40:12 -04:00
David A. Mellis
f7f9f78b5a
Merge remote branch 'ricklon/platforms' into new-extension
2011-06-25 11:08:42 -04:00
ricklon
dacfa86223
Addtional debuggin. Trying to find the pins compile issue.
2011-06-22 21:20:45 -06:00
Thibaut VIARD
32231aac95
Adding sam bootloaders folder
2011-06-21 01:07:24 +02:00
Thibaut VIARD
37b2409f28
Modifying Arduino.h to reflect outer changes
2011-06-21 01:05:39 +02:00
Thibaut VIARD
c6850d60b7
Adding mk files for future use and readme
2011-06-21 01:03:39 +02:00
Thibaut VIARD
1a57af05dd
Removing unused file board.h
2011-06-21 00:51:55 +02:00
Thibaut VIARD
37fe55e52e
Updating files as done last week with David
2011-06-21 00:48:47 +02:00
Thibaut VIARD
ad017bf01b
Renaming board files to variant.*
2011-06-21 00:47:56 +02:00
Thibaut VIARD
7c708132c1
Moving sam3s peripheral library to more global sam library
2011-06-21 00:42:25 +02:00
Thibaut VIARD
61c55be1cb
Removing wrong file from sam3s-ek variant folder
2011-06-21 00:32:32 +02:00
Thibaut VIARD
01f726a0e1
Adding linker and deubg scripts
2011-06-21 00:31:20 +02:00
Thibaut VIARD
fabdccef78
Deleting unused pins.txt
2011-06-21 00:26:34 +02:00
Thibaut VIARD
ec51290d86
Renaming pins folders to variants
2011-06-21 00:25:24 +02:00
Thibaut VIARD
dedf1b5fc3
Adding README file at root of tools folders
2011-06-21 00:22:54 +02:00
Thibaut VIARD
f4fdcb6e8e
Moving all AVR specific libraries to hardware/avr
2011-06-21 00:20:43 +02:00
Thibaut VIARD
3da8227878
Removing CodeSourcery toolchain from GIT
2011-06-21 00:08:25 +02:00
Thibaut VIARD
be2c9273c2
Adding SAM specific libraries
2011-06-21 00:03:22 +02:00
ricklon
aa01546b55
Switched to a nonconflicting delimeter |. Compile process is working. Need to make sure that it matches 1.0 process exactly.
2011-06-17 22:12:21 -04:00
ricklon
67c9dfc667
A bit of cleanup. Delimeter not figured out yet.
2011-06-17 00:54:58 -04:00
ricklon
b0556c2e74
Changed :: to , for platforms.txt. Also, changes to compile process to support execAsynchronously changed to Stringp[]
2011-06-15 23:04:38 -04:00
WestfW
c56a1293d7
Oops. Add atmega8.lst/hex and atmega168.lst/hex to controlled files.
2011-06-14 23:57:41 -07:00
David A. Mellis
7c9a03410f
Renaming platform components.
2011-06-14 23:49:47 +02:00
WestfW
7b1ee0f1b0
Allow the READ PARAMETER command to return our version number.
...
(significant size impact: 14 bytes!)
Initialized "address" to eliminate compiler warning (4 bytes!)
Add "atmega168" as a more accurate target name than "diecimila"
(keep diecimila as well for backward compatibility)
Reduce the .hex and .lst targets that are stored in source control
to the three basics: atmega8, atmega168, atmega328. The other
targets remain in the makefile and makeall, but will need to be
built from source if wanted. Which should be less of a problem
now that the source is buildable without installing crosspack.
2011-06-14 10:24:27 -07:00
WestfW
39a496616f
Modify Uno "lock" bits in boards.txt to make bootloader readable by
...
sketches. Part of http://code.google.com/p/arduino/issues/detail?id=554
2011-06-14 01:13:41 -07:00
WestfW
e81c1123b6
http://code.google.com/p/arduino/issues/detail?id=368
...
Optiboot does not support ArduinoasISP programmer.
When avrdude runs and talks to an arduino running ArduinoISP,
it needs the optiboot (entered due to auto-reset) to abort and
start the ArduinoISP "application" when it sees communications
at the wrong serial speed. Unfortunately, optiboot treats all
unrecognized command characters as "no-ops" and responds/loops
for more commands, leading to a nice loop that never gets to
the sketch. This patch causes characters received with Framing
errors (the most likely error for speed mis-matches) to NOT
reset the watchdog timer (normally done in getch()), which will
cause the application to start if it continues for "a while."
(tested. Works! Running ArduinoISP at speeds as high as 57600
still causes the bootloader to start the sketch (although it fails
later on for other reasons.))
2011-06-13 19:07:07 -07:00
amcewen
8dfee1fb74
Merge remote branch 'upstream/new-extension'
...
Moved my fork to the Arduino 1.0 codebase
2011-06-11 21:27:18 +01:00
WestfW
ece29c3805
(make sure .hex and .lst are updated as well.)
2011-06-11 03:17:38 -07:00
WestfW
422398e08c
Fix errors in LDSECTIONS refactoring
...
(found during atmega8 testing.)
2011-06-11 03:15:33 -07:00
WestfW
e28b716f88
Update version to reflect previous edit. Sigh.
2011-06-10 23:16:21 -07:00
WestfW
6f7687b0f9
Shrink code by using registers for variables "length" and "address"
...
http://code.google.com/p/optiboot/issues/detail?id=33
Fix high-value watchdog timeouts on ATmega8
http://code.google.com/p/optiboot/issues/detail?id=38
Change "start app on bad commands" code to start the app via the
watchdog timer, so that the app is always started with the chip
in fully reset state.
http://code.google.com/p/optiboot/issues/detail?id=37
2011-06-10 23:02:25 -07:00
WestfW
00706284de
Add a version number to the optiboot source and binary.
...
http://code.google.com/p/arduino/issues/detail?id=554
end of flash memory where they can be read (at least in theory) by
device programmers, hex-file examination, or application programs.
This is done by putting the version number in a separate section
(".version"), and using linker/objcopy magic to locate that section as
appropriate for the target chip. (See
http://lists.gnu.org/archive/html/avr-gcc-list/2011-02/msg00016.html
for some discussion on the details.)
Start the version at 4.1 (the last "packaged" version of optiboot was
called version 3, so the "top of source" would be 4.0, and adding the
version number makes 4.1)
Refactor LDSECTION in the Makefile to LDSECTIONS so that multiple
section start addresses can be defined.
Change the _isp makefile definitions to make the bootloader section
readable (but not writable) by the application section. (This would
need to be done elsewhere as well to handle all bootloader programming
techniques. Notably Arduino's boards.txt
Note that this change does not change the "code" portion of optiboot
at all. The only diffs in the .hex files are the added version word
at the end of flash memory.
2011-06-10 17:47:47 -07:00
WestfW
d4632cb095
Update shell script makeall
2011-06-10 16:29:34 -07:00
WestfW
e2812ef91c
This is a relatively significant edit that brings the Arduino copy of
...
optiboot up-to-date with the optiboot source repository as of Jun-2011
(the last changes made in the optiboot repository were in Oct-2010)
This adds support for several plaforms, fixes the "30k bug", and
refactors the source to have separate stk500.h, boot.h, and pin_defs.h
These are the arduino opticode issues fixed:
http://code.google.com/p/arduino/issues/detail?id=380
optiboot has problems upload sketches bigger than 30 KB
http://code.google.com/p/arduino/issues/detail?id=556
update optiboot to the point of the latest optiboot project sources.
These are issues that had been solved in the optiboot source aready:
http://code.google.com/p/arduino/issues/detail?id=364
optiboot leaves timer1 configured when starting app, breaks PWM on
pin 9 and 10. (fixed with a workaround in arduino core.)
aka http://code.google.com/p/optiboot/source/detail?r=c778fbe72df6ac13ef730c25283358c3c970f73e
Support for ATmega8 and mega88.
Fix fuse settings for mega168 _ISP targets
Additional new platforms (mega, sanguino)
http://code.google.com/p/optiboot/issues/detail?id=26
Set R1 to 0 (already in arduino code)
http://code.google.com/p/optiboot/issues/detail?id=36&can=1
Fails to build correctly for mega88
After this commit, the only differences between the Arduino optiboot.c
and the optiboot repository optiboot.c are cosmetic.
2011-06-10 16:17:13 -07:00
WestfW
6840b77643
http://code.google.com/p/arduino/issues/detail?id=517
...
Remove the trailing comments when setting fuse values for the various
*_isp targets, so that they won't cause avrdude errors.
This was done the same way as in the optiboot source tree:
http://code.google.com/p/optiboot/issues/detail?id=17
http://code.google.com/p/optiboot/source/detail?r=005fb033fc08c551b2f86f7c90c5db21549b3f20
2011-06-09 22:57:27 -07:00
WestfW
2d2ed324b4
Makefile modification to allow building optiboot in more environments.
...
Allows building within the Arduino Source tree, and within the Arduino
IDE tree, as well as using CrossPack on Mac.
Adds README.TXT to track arduino-specific changes (and documents the
new build options.)
This addresses Arduino issue:
http://code.google.com/p/arduino/issues/detail?id=487
And optiboot issue
http://code.google.com/p/optiboot/issues/detail?id=1
(which can be thought of as a subset of the Arduno issue.)
Note that the binaries produced after these Makefile changes (using any
of the compile environments) are identical to those produced by the
crosspack-20100115 environment on a Mac.
2011-06-09 22:36:05 -07:00
ricklon
58de95a905
Added platforms.txt, and update boards.txt with platform=avr
2011-06-06 21:57:11 -04:00
David A. Mellis
87a04fc064
Added Printable interface class to allow printing of classes such as IPAddress
2011-06-04 09:19:17 -04:00
aethaniel
6f1482baba
Adding Atmel SAM3 specific files
2011-06-01 01:54:47 +02:00
aethaniel
65ce0cd0a2
Modified syscalls.* to fit CPP compilation
2011-06-01 01:53:32 +02:00
aethaniel
49b03a0ea7
Putting back all vectors to libchip (Core based)
2011-06-01 01:24:23 +02:00
aethaniel
799c348db5
Adding needed folder for CS
2011-06-01 00:04:17 +02:00
aethaniel
fdfdd0b4bf
Adding minimal libboard with lowlevel init and vectors
2011-05-31 23:17:52 +02:00
aethaniel
f08e822b17
Adding libchip_sam3s into tools, needed to add all SAM3S peripheral drivers
2011-05-31 23:09:42 +02:00
aethaniel
4e0df49a5d
Adding CodeSourcery just in case of, to be removed later
2011-05-31 22:04:30 +02:00
David A. Mellis
2711c9910b
Fixing 300 baud communication for serial.
...
Because UBBR is only 12 bits, we were overflowing it at 300 baud because of the use of the U2X bit. Now we turn off U2X if it would yield a UBBR value that would overflow.
Note that this breaks 300 baud communication with the computer on the Uno and Mega 2560 because the 8U2 USB-serial firmware has this same bug (and previously they cancelled each other out). Since, however, it seems more likely that people will need to use 300 baud to communicate with other (legacy) hardware than with the computer, I'm making this change. Issue for 8U2 firmware bug: http://code.google.com/p/arduino/issues/detail?id=542
http://code.google.com/p/arduino/issues/detail?id=522
2011-05-20 13:29:13 -04:00
David A. Mellis
db64d2fc32
Fixing 300 baud communication for serial.
...
Because UBBR is only 12 bits, we were overflowing it at 300 baud because of the use of the U2X bit. Now we turn off U2X if it would yield a UBBR value that would overflow.
Note that this breaks 300 baud communication with the computer on the Uno and Mega 2560 because the 8U2 USB-serial firmware has this same bug (and previously they cancelled each other out). Since, however, it seems more likely that people will need to use 300 baud to communicate with other (legacy) hardware than with the computer, I'm making this change. Issue for 8U2 firmware bug: http://code.google.com/p/arduino/issues/detail?id=542
http://code.google.com/p/arduino/issues/detail?id=522
2011-05-14 12:25:39 -04:00
David A. Mellis
8c0fdf1e43
Small optimization in HardwareSerial.
...
begin(long) -> begin(unsigned long)
Conflicts:
hardware/arduino/cores/arduino/HardwareSerial.h
2011-05-12 16:58:56 -04:00
David A. Mellis
1747292711
Optimizing printing of numbers (writing a single buffer).
...
Fix from Bill Greiman via Limor.
2011-05-07 18:17:32 -04:00
David A. Mellis
cf044cd236
Adding serialEvent(), serialEvent1(), etc.
...
Called from within the serial receive interrupt. These are implemented as an empty weak function in the core that be overridden by the user's sketch.
http://code.google.com/p/arduino/issues/detail?id=263
2011-05-07 13:04:13 -04:00
David A. Mellis
c740778bf6
Refactoring the UART0 / USART0 receive interrupt handler.
2011-05-07 12:47:43 -04:00
David A. Mellis
694b8ad392
Changing Serial.flush() to write outgoing data, not drop incoming data.
...
This brings it in line with most other uses of flush(), both in and out of Arduino.
http://code.google.com/p/arduino/issues/detail?id=497
2011-05-07 12:05:27 -04:00
amcewen
35a78b15ea
Added virtual destructor to Printable, which also requires new and delete operators to be added
2011-04-10 11:34:40 +01:00
amcewen
facbd279b6
Added a brief explanation of how you'd use Printable
2011-04-02 11:33:27 +01:00
amcewen
3540d92eb2
Added Printable interface class to allow printing of classes such as IPAddress
2011-04-01 21:10:38 +01:00
amcewen
17d8fcb46d
Pulled out Server API into the NetServer base class, and a few minor changes to get the NetClient API to work well with the WiFly library
2011-03-31 16:19:17 +01:00
David A. Mellis
d12fe18480
Restoring concatenation of built-in types with String.
2011-03-31 10:56:14 -04:00
amcewen
a5f6a42dd7
Pulled out Client API into a base class to allow multiple derived classes to use it, and moved it (plus IPAddress) out of the Ethernet library so that other libraries can find it. First steps in integrating the WiFly code so it's easier to switch between that and Ethernet
2011-03-28 12:08:53 +01:00
David A. Mellis
0ac0dcf158
Adding F("foo") syntax for flash strings.
2011-03-27 15:06:20 -04:00
David A. Mellis
e3c7a54725
String: removing implicit numeric conversions and new approach to "if (s)".
...
This makes explicit the String constructors that take numeric types and chars and removes the versions of concat() and operator=() and operator+() that accept numberic types.
It also replaces the operator bool() with a operator that converts to a function pointer. This allows for uses like "if (s)" but not "s + 123". See: http://www.artima.com/cppsource/safebool.html . This allowed removing the disambiguating operator+() functions and relying solely on StringSumHelper and anonymous temporaries once again.
Also, now treating unsigned char's like int when constructing Strings from them, i.e. String(byte(65)) is now "65" not "A". This is consistent with the new behavior of Serial.print(byte).
2011-03-26 18:52:54 -04:00
David A. Mellis
efae89ea0e
Commenting String API behavior.
2011-03-23 22:42:05 -04:00
David A. Mellis
7d4073ef73
Return an invalid string (not a partial one) when operator+() fails.
2011-03-19 11:14:17 -04:00
David A. Mellis
d3a5532d13
Starting to distinguish between empty strings and invalid (null) ones.
2011-03-18 21:45:27 -04:00
David A. Mellis
6f3ceb399d
Protecting String copy() and move().
2011-03-13 19:39:04 -04:00
David A. Mellis
488e672ea0
Adding additional String + operators for disambiguation.
...
The operator bool() means that you could implicitly convert a String to a bool and then add it to it an int, for example. Which means our operator+ has to match exactly or it will be ambiguous.
2011-03-13 19:31:10 -04:00
David A. Mellis
cc24d41b74
Moving move() to __GXX_EXPERIMENTAL_CXX0X__ only, adding operator bool().
2011-03-13 16:46:06 -04:00
David A. Mellis
f5f2e09636
Modifying String.concat() to return success or failure, not this.
...
Which means you can't chain multiple concat() calls together, but you can check if they succeeded or not.
2011-03-12 14:03:34 -05:00
David A. Mellis
6727c8a831
Don't return the string when modifying its value.
...
Changing toLowerCase(), toUpperCase(), trim() and replace() to return void instead of a reference to the string that's just been changed. That way, it's clear that the functions modify the string they've been called on.
2011-03-11 18:54:58 -05:00
David A. Mellis
7fa866ffea
Renaming append() back to concat().
2011-03-11 18:04:31 -05:00
David A. Mellis
9139094c36
Removing F("string") syntax for now.
...
We should probably add something like this back in later, but I want to do one thing at a time. This removes the __FlashStringHelper class as well.
2011-03-11 18:01:40 -05:00
David A. Mellis
1d9bbc01e3
Rewrite of the String class by Paul Stoffregen.
...
http://www.pjrc.com/teensy/string_class_experimental.html
2011-03-11 17:56:10 -05:00
David A. Mellis
6b890f8c7d
Fixing typo in boards.txt.
2011-03-09 21:22:04 -05:00
David A. Mellis
af841d166d
Flushing outgoing and incoming data in Serial.end().
...
That is, waiting for outgoing data to transmit and dropping any received data.
2011-03-06 12:20:42 -05:00
David A. Mellis
1bef2990b6
Fixing race condition in Serial write (Brian Cook).
2011-03-06 11:47:18 -05:00
David A. Mellis
10ecfa8bea
Moving TCCR1B reset into #ifdef check.
2011-03-06 11:29:35 -05:00
David A. Mellis
7f0cc2111c
Implemented serial transmit buffering.
...
Now Serial.write() places characters in the transmit buffer, and the data register empty interrupt reads and transmit them. Based loosely on the implementation here: ftp://wookey.org.uk/arduino.
http://code.google.com/p/arduino/issues/detail?id=262
2011-03-05 14:17:26 -05:00
David A. Mellis
19597b1d0b
Factoring pin definitions out of the core.
...
That is, there's now a pins/ directory in a platform, which includes multiple directories, each of which has its own pins_arduino.h. The boards.txt gets a new preferences, <BOARD>.build.pins, whose values is a sub-directory of the pins/ directory (possibly with a "platform:" prefix). That sub-directory is then placed in the include path during compilation.
2011-03-04 21:05:05 -05:00
David A. Mellis
afb60e1163
Moving all pin definitions into pins_arduino.h.
...
This is a step towards providing portability across AVR's by simply including an appropriate header file.
2011-03-03 23:54:33 -05:00
David A. Mellis
d59fcb8eed
Fixing warnings (David H. Lynch Jr).
2011-03-03 22:56:20 -05:00
David A. Mellis
5234a96b34
Rearranging internal #defines in headers.
2011-03-03 18:57:05 -05:00
David A. Mellis
ba14230883
Removing optimized digitalWrite(), digitalRead(), pinMode().
2011-03-03 18:46:45 -05:00
David A. Mellis
4ea2d99c1a
Re-arranging header files and small fixes to optimized core functions.
2011-03-02 23:05:25 -05:00
David A. Mellis
bb7a044884
Moving wiring.h contents into Arduino.h.
2011-03-01 20:00:16 -05:00
David A. Mellis
d05e4021d0
Renamed WProgram.h to Arduino.h.
2011-03-01 19:52:13 -05:00
David A. Mellis
97abbd7a31
Removing BYTE keyword (use Serial.write() instead).
2011-02-26 13:58:03 -05:00
David A. Mellis
13e3ba87e3
Small optimization in HardwareSerial.
...
begin(long) -> begin(unsigned long)
2011-02-25 18:36:46 -05:00
David A. Mellis
d15e9aa98a
Merge branch 'master' into new-extension
2011-02-22 22:02:22 -05:00
David A. Mellis
d180ad18a9
Revert "Changes to optimized digitalWrte(), etc."
...
This reverts commit aa1f1cbda9
2011-02-18 10:41:29 -05:00
David A. Mellis
956a4f2024
Revert "Adding noAnalogWrite() function to disable PWM."
...
This reverts commit 38d4a34fec
2011-02-18 10:40:56 -05:00
David A. Mellis
38d4a34fec
Adding noAnalogWrite() function to disable PWM.
...
Also, removing the inline version of digitalPinToTimer() (since we're not optimizing the functions that use it anyway). The noAnalogWrite() function is in wiring_analog.c, deriving from the previous turnOffPWM() which has moved from wiring_digital.c.
http://code.google.com/p/arduino/issues/detail?id=476
2011-02-12 14:47:08 -05:00
David A. Mellis
aa1f1cbda9
Changes to optimized digitalWrte(), etc.
...
Factoring out the implementation of digitalWrite(), digitalRead(), and pinMode() into macros that can either be inlined (for constant pin numbers) or executed within a function (non-constant pins). Removing testing for timers on pins in digitalWrite(), digitalRead(), and pinMode(). Moving pin to port macros from pins_arduino.h to wiring.h.
2011-02-11 19:29:46 -05:00
David A. Mellis
9dccd634c5
Optimized digitalWrite(), etc. from Alvaro Lopez.
2011-02-11 17:53:24 -05:00
David A. Mellis
94168bd0f4
Fix to optiboot infinite loop problem.
...
Explicitly setting R1 to 0 so that the watchdog timer is properly initializing, preventing it from timing out and resetting the processor.
http://code.google.com/p/optiboot/issues/detail?id=26
http://code.google.com/p/arduino/issues/detail?id=446
2011-01-15 13:29:08 +00:00
David A. Mellis
63f4021447
Changing String append to use realloc(); thanks to Paul Stoffregen.
...
http://code.google.com/p/arduino/issues/detail?id=332
2010-12-11 15:22:07 -05:00
David A. Mellis
d7ecd5e4e8
Minor ATmega8U2 firmware update and new .hex files.
...
Adding LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 to makefile to save space, updating release number to 0x0001.
2010-12-04 14:28:56 -05:00
David A. Mellis
f92b235be2
Minor bug fixes to the 8U2 USB-to-serial firmware.
2010-12-04 13:50:27 -05:00
David A. Mellis
32388c908f
Replacing custom String.toInt() function with a call to atol().
2010-12-03 23:12:41 -05:00
David A. Mellis
dce5e09e69
Fixing Linux UNO serial bug (thanks to Dean Camera).
...
Enabling INTERRUPT_CONTROL_ENDPOINT in the makefile so we don't miss control messages from Linux. Also deleted two unused USB events to save a few bytes of space (the Mega 2560 .hex is now exactly 4096 bytes).
2010-11-29 23:26:54 -05:00
David A. Mellis
d98d31eb1a
Redoing 448222e4b6 without all the extra files.
...
Adds toInt() to String, WCharacter.h (from Wiring), and an SD Datalogger example.
2010-11-29 15:20:30 -05:00
David A. Mellis
920212ee05
Revert "added toInt() function to WString".
...
This reverts commit 448222e4b6
2010-11-29 15:14:10 -05:00
Tom Igoe
448222e4b6
added toInt() function to WString
2010-11-29 11:31:00 -05:00
David A. Mellis
4dad13532f
pulseIn() now times out while measuring the pulse, not just while waiting for it to start.
2010-11-22 23:33:59 -05:00
David A. Mellis
fcc4188b15
SD File object implements Stream.
...
Added peak() and available() using a single byte buffer.
Added flush().
2010-11-20 11:45:05 -05:00
David A. Mellis
c11098c237
Fixing bug w/ subsequent calls to tone().
...
http://code.google.com/p/arduino/issues/detail?id=397
2010-11-11 23:57:12 -05:00
David A. Mellis
a403c19ade
Cast to encourage optimization of Serial ring buffer index calculations.
...
http://code.google.com/p/arduino/issues/detail?id=391
2010-11-11 23:29:21 -05:00
David A. Mellis
66755f9bce
Changing baud rate calculation to always use double speed mode except for 57600 baud at 16 MHz.
...
http://code.google.com/p/arduino/issues/detail?id=394
2010-11-11 23:28:21 -05:00
David A. Mellis
9b42d2dc03
Modifying Tone.cpp to use register-based (not CPU-based) #ifdefs.
2010-11-08 23:09:29 -05:00
David A. Mellis
b0bc52d7d5
Modifying basic functions (digital and analog, read and write) to use register-based ifdefs, not cpu-based.
...
http://code.google.com/p/arduino/issues/detail?id=307
http://code.google.com/p/arduino/issues/detail?id=316
http://code.google.com/p/arduino/issues/detail?id=323
http://code.google.com/p/arduino/issues/detail?id=324
2010-10-17 17:55:53 -04:00
David A. Mellis
b0888a34b5
Making attachInterrupt() check registers, not CPUs.
...
Patch by Mark Sproul, via Christian Maglie.
http://code.google.com/p/arduino/issues/detail?id=340
2010-10-17 14:05:46 -04:00
David A. Mellis
1cb3c97610
Making HardwareSerial tests register-based, not CPU-based.
...
Mark Sproul's patches, via Christian Maglie.
http://code.google.com/p/arduino/issues/detail?id=315
2010-10-17 13:36:02 -04:00
David A. Mellis
9cad196ae5
Changing #include <> to #include "" in Tone.cpp.
2010-10-09 17:08:19 -04:00
David A. Mellis
b3ba5d4f97
Fixing PWM on pins 9 & 10 on the Uno.
...
Resetting TCCR1B to 0 after it's configured by optiboot.
http://code.google.com/p/arduino/issues/detail?id=364
2010-10-02 13:38:10 -04:00
David A. Mellis
d0f8052f8e
More information on USB VID/PIDs.
2010-09-28 17:19:07 -04:00
David A. Mellis
e9a913066c
Replacing Arduino VID / PID with the Atmel-supplied ones.
2010-09-28 09:31:10 -04:00
David A. Mellis
0768ebed50
Adding note about Arduino VID and PIDs.
2010-09-27 12:20:38 -04:00
David A. Mellis
be6c36ee33
Adding readme about the firmwares.
2010-09-24 10:40:37 -04:00
David A. Mellis
ffa3ce71ee
Adding usbserial and usbdfu firmwares (and combined compiled .hex files).
2010-09-24 10:35:54 -04:00
David A. Mellis
4ab27234d3
Adding Arduino Mega 2560 board entry.
2010-09-24 10:17:01 -04:00
David A. Mellis
27109e3b1a
Adding the Mega 2560 bootloader and boards.txt / boards menu entry.
2010-09-24 10:10:57 -04:00
David A. Mellis
7087bcf5bd
Adding optiboot and Arduino Uno boards menu entry.
2010-09-22 09:04:33 -04:00
David A. Mellis
27cfd22066
1280 -> 1280/2560.
2010-09-08 22:33:33 +00:00
David A. Mellis
722b93dce4
Changing String::toCharArray() and getBytes() to accept a buffer, rather than return one. That way they don't expose the internal representation of the String class, allowing future optimization. Thanks to Paul Stoffregen.
2010-08-28 10:23:54 +00:00
David A. Mellis
f8077a96d7
Returning a reference to a dummy character for indices beyond the string length (in operator[]).
2010-08-28 09:55:26 +00:00
David A. Mellis
a48d96ee49
Adding some basic error checking to the String class (i.e. checking for a non-null buffer before modifying its contents).
2010-08-18 21:39:28 +00:00
David A. Mellis
5ede40be13
Now including stdlib.h from wiring.h so our abs() #define comes after the stdlib abs() definition (and therefore doesn't break it).
2010-08-17 21:50:41 +00:00
David A. Mellis
57e2c152f1
Adding shiftIn() from Wiring (no count or delaytime though).
2010-08-11 22:59:00 +00:00
David A. Mellis
54d367b1e0
Making Client inherit from Stream, which unforunately means taking peek() out of Stream for now, since there's no immediate implementation for Client.
2010-08-11 18:19:01 +00:00
David A. Mellis
05e8d675cd
Adding Arduino BT w/ ATmega328 to the boards menu.
2010-08-07 19:56:14 +00:00
David A. Mellis
3524387e70
Adding ATmega328 version of the Arduino BT bootloader, along with a Makefile for building it.
2010-08-07 19:48:59 +00:00
David A. Mellis
e2fe4d0dfa
No longer requiring WProgram.h for Print / Stream classes (replaced Arduino-specific type names in String).
2010-08-06 01:23:19 +00:00
David A. Mellis
0aec45afbc
Moving SPI pin definitions into core (from SPI library): SS, MISO, MOSI, and SCK.
2010-08-02 22:33:11 +00:00
David A. Mellis
94045e292a
changing available() to return an int (because the Ethernet Client class or another stream might need more than 255 bytes).
2010-08-02 22:23:48 +00:00
Tom Igoe
81e7814887
added more String examples
2010-07-27 22:59:18 +00:00
David A. Mellis
4e33e6cb9f
Reverting changes to String class and modifying to allow + and += to work on more types.
2010-07-27 14:20:56 +00:00
Tom Igoe
cd4c0e56e2
removed append() from String library
2010-07-27 10:18:04 +00:00
Tom Igoe
b78768f761
checked in Xiaoyang Feng's changes to String library
2010-07-27 10:09:09 +00:00
Tom Igoe
27b3254e99
Checked in Xiaoyang's changes to String library
2010-07-27 10:06:49 +00:00
Tom Igoe
8fcb098533
Checked in Xiaoyang's changes to String library
2010-07-27 10:06:43 +00:00
David A. Mellis
52e0e1a999
INTERNAL -> INTERNAL1V1 AND INTERNAL2V56 on the Mega (issue #194 ).
2010-07-10 21:07:51 +00:00
David A. Mellis
4fa7eb8e32
whitespace.
2010-07-05 16:08:35 +00:00
David A. Mellis
31601ffe77
Adding a peek() function to Stream and HardwareSerial (Serial).
2010-07-04 23:31:55 +00:00
David A. Mellis
934312682e
Adding support for printing Strings to the Print class.
2010-07-04 23:22:34 +00:00
David A. Mellis
880bc682a9
Modifying String from new/delete to malloc()/free(). Also #include'ing WString.h from WProgram.h.
2010-07-04 16:36:52 +00:00
David A. Mellis
99abaed344
Adding WString.h and WString.cpp straight from Wiring (r. 726). Won't actually work yet.
2010-07-04 16:27:23 +00:00
David A. Mellis
e2f5f0c9d6
Disabling interrupts while digitalWrite() and pinMode() modify registers (issue #146 ).
...
Updating revisions.
2010-06-12 20:32:58 +00:00
David A. Mellis
e2169fa0a4
Re-enabling timer 2 pwm after tone() ends.
...
Factored out common code to disable timers.
2010-06-12 19:47:41 +00:00
David A. Mellis
0557d46fc2
Adding a basic Stream interface and modifying HardwareSerial to inherit from it.
2010-05-28 22:41:03 +00:00
David A. Mellis
8f416eb54a
More accurate delay() function from BenF.
2010-05-25 20:16:15 +00:00
David A. Mellis
3738f450c0
Adding A0=14, A1=15, etc. aliases for analog input pins and modifying analogRead() to accept them (in addition to 0, 1, 2, etc.). Removing some unused code elsewhere.
2010-05-16 04:05:40 +00:00
David A. Mellis
282d623180
Adding 5V, 16 MHz versions of the Arduino Pro and Pro Mini (ATmega328 and ATmega168) to the boards menu.
2010-05-16 02:53:51 +00:00
David A. Mellis
5d54fbf70b
Removing some Processing stuff that we don't need.
...
Moving the Arduino Fio up in the boards menu.
2010-05-08 20:37:54 +00:00
Tom Igoe
d5b0dfd527
Added Fio to boards.txt, now that it's part of the lineup.
2010-03-28 15:45:59 +00:00
David A. Mellis
d91b4c1f38
Limiting tone generation to timer 2 only to prevent conflicts with the Servo library.
2010-01-09 17:02:27 +00:00
David A. Mellis
b4402e1e26
Adding tone() and noTone() functions, using Brett Hagman's Tone library.
2009-12-29 20:57:07 +00:00
David A. Mellis
6672d51d56
Removing (no longer maintaining) the Makefile.
2009-12-28 15:39:19 +00:00
David A. Mellis
def86681b7
Adding precision parameter for printing of floats / doubles. Restructured the print() and println() functions a bit.
2009-12-25 20:20:27 +00:00
David A. Mellis
c82a43abde
Adding Serial.end().
2009-12-23 00:00:17 +00:00
David A. Mellis
3063c34ebe
Fixing bug in calling micros() from interrupts: http://code.google.com/p/arduino/issues/detail?id=55
2009-12-18 17:44:08 +00:00
David A. Mellis
ba5935e273
No longer disabling interrupts in delayMicroseconds(): http://code.google.com/p/arduino/issues/detail?id=67
2009-12-18 17:04:51 +00:00
David A. Mellis
d2a38e4b5a
Improving third-party hardware support:
...
- moving back to multple cores per platform
- using target instead of platform
- moving per-board and per-programmer preferences out of Preferences.java and into a new Target class
- adding a new "target" preference
- support for platform:value values in board preferences for bootloader path and core
- XXX: need to support platform:value syntax for board upload.using preferences.
2009-11-21 23:23:43 +00:00
David A. Mellis
e5b5f25476
Third-party cores seems to sort of work now, but burning bootloaders is probably broken.
...
Need to decide on the format for the boards.txt file.
2009-11-07 18:56:45 +00:00
David A. Mellis
3075c8e4fd
Moving libraries out of arduino platform / core directory and to top-level.
2009-11-07 17:54:56 +00:00
David A. Mellis
ff0336a3b6
Moving libraries into arduino/
2009-11-07 17:07:59 +00:00
David A. Mellis
ab1eb4aaa0
Moving things around.
2009-11-07 17:05:21 +00:00
David A. Mellis
c6b305357e
Adding Arduino as ISP sketch (firmware) and programmers.txt entry.
2009-11-01 17:00:31 +00:00
David A. Mellis
6a15e01ff8
Passing the ARDUINO constant from the IDE to avr-gcc as a command line argument (so I don't forget to update the version in the .h file).
2009-10-23 23:04:03 +00:00
David A. Mellis
e884bb7ca8
Updating ARDUINO to 0018 (in wiring.h).
2009-09-13 17:57:17 +00:00
David A. Mellis
f5ffd44e77
Undoing revision 628 because it broke analogRead() on analog inputs 8 to 15 of the Arduino Mega.
2009-08-23 20:59:47 +00:00
David A. Mellis
e0d0e22eda
Removing obsolete wiring_serial.c from Makefile. Adding - to beginning of dependcy lines to avoid unnecessary warnings.
2009-08-16 10:21:16 +00:00
Tom Igoe
66c454f2e6
Checked and updated all LiquidCrystal examples
2009-08-05 14:41:27 +00:00
Tom Igoe
5a3da0155c
Checked and updated all LiquidCrystal examples
2009-08-05 14:41:24 +00:00
Tom Igoe
96c3621047
Checked and updated all LiquidCrystal examples
2009-08-05 14:41:23 +00:00
Tom Igoe
e04a52b733
Checked and updated all LiquidCrystal examples
2009-08-05 14:41:17 +00:00
Tom Igoe
ba362ebe72
Checked and updated all LiquidCrystal examples
2009-08-05 14:41:14 +00:00
Tom Igoe
47f3f70851
Checked and updated all LiquidCrystal examples
2009-08-05 14:41:11 +00:00
Tom Igoe
cb51697237
Checked and updated all LiquidCrystal examples
2009-08-05 14:41:08 +00:00
Tom Igoe
fd51ab33b5
Checked and updated all LiquidCrystal examples
2009-08-05 14:41:03 +00:00
Tom Igoe
15eaa600fb
Checked and updated all LiquidCrystal examples
2009-08-05 14:40:55 +00:00
Tom Igoe
df1b7f787c
Changed begin() in LiquidCrystal examples
2009-08-02 18:45:13 +00:00
Tom Igoe
afc4948495
Changed begin() in LiquidCrystal examples
2009-08-02 18:45:08 +00:00
Tom Igoe
69e25cef45
Changed begin() in LiquidCrystal examples
2009-08-02 18:45:04 +00:00
Tom Igoe
ced413c4d3
Changed begin() in LiquidCrystal examples
2009-08-02 18:44:59 +00:00
Tom Igoe
9c872e1fbf
Changed begin() in LiquidCrystal examples
2009-08-02 18:44:54 +00:00
Tom Igoe
63c09f6495
Changed begin() in LiquidCrystal examples
2009-08-02 18:44:52 +00:00
Tom Igoe
59109d6322
Changed begin() in LiquidCrystal examples
2009-08-02 18:44:30 +00:00
Tom Igoe
21cc6be265
Changed begin() in LiquidCrystal examples
2009-08-02 18:41:40 +00:00
David A. Mellis
b16871c2db
Updating to rev. 27 of Firmata.
2009-07-30 20:48:59 +00:00
David A. Mellis
fc9c2815d5
Updating keywords.txt for LiquidCrystal library.
2009-07-25 18:56:46 +00:00
David A. Mellis
c536dccd92
Renaming LiquidCrystal example .pde files to correspond to new function names.
2009-07-25 18:29:53 +00:00
David A. Mellis
71085b5e18
Renaming LiquidCrystal example directories to correspond to new function names.
2009-07-25 18:28:35 +00:00
David A. Mellis
97706deda0
Updating LiquidCrystal API and examples.
2009-07-25 18:26:29 +00:00
David A. Mellis
4ee94a1800
Fixing Servo library on the ATmega8 by changing assignments to TIMSK and TIFR into bitwise-or's. Otherwise, this broke millis() by disabling the timer 0 overflow interrupt.
2009-07-21 06:05:02 +00:00
David A. Mellis
262400962f
Renaming the 328 and 168 boards.
2009-07-21 05:22:22 +00:00
David A. Mellis
69740fcfb4
Updating to revision 25 of firmata (slightly post version 2.1beta2).
2009-07-21 05:18:50 +00:00
David A. Mellis
3b78ba0d8c
Updating to Firmata-2.1beta1 (rev 23).
2009-07-14 21:32:55 +00:00
David A. Mellis
e5dc169cc7
Adding Nano w/ ATmega328.
2009-07-14 21:18:52 +00:00
David A. Mellis
abbf61fa2b
Adding Tom's examples for the new LiquidCrystal library.
2009-07-13 02:33:02 +00:00
David A. Mellis
5b5e739645
Removing old LiquidCrystal examples.
2009-07-13 02:31:46 +00:00
David A. Mellis
3f74888018
Adding improved baud rate calculation, including use (or not) of the U2X bit. (Code from gabebear).
2009-07-12 02:58:59 +00:00
David A. Mellis
430977c853
Clearing the U2Xn bit in Serial.begin() (because it is set on the Pro / Pro Mini 328). Fixing some indentation.
2009-07-12 01:58:15 +00:00
David A. Mellis
f0c3263b2f
Adding keywords.txt file for the Ethernet library.
2009-07-12 00:33:25 +00:00
David A. Mellis
55df12a8bd
Integrating the new Servo library (MegaServo) by Michael Margolis. Uses timer 1, and, on the Mega, timers 3, 4, and 5 for up to 12 servos (48 on the Mega).
2009-07-12 00:33:02 +00:00
David A. Mellis
5dda367b06
Migrating to Limor Fried's improved LiquidCrystal library.
2009-07-11 00:54:26 +00:00
David A. Mellis
e9e928e03e
Fixing indentation in twi.c.
2009-06-20 20:48:55 +00:00
David A. Mellis
6ba23bafe2
Fixing bug in Wire library that caused it to read and discard one extra byte when do a requestFrom() a slave device. Thanks to Christopher K. Johnson.
2009-06-20 20:43:24 +00:00
David A. Mellis
3b09a2ad1d
Fixing Client::connected() and Client::status() to return reasonable values when the Client isn't associated with a valid socket: issue #34 .
2009-06-15 20:11:13 +00:00
David A. Mellis
051d8f2e4f
Changing analog read channel mask from 0x07 to 0x0f to allow for reading of the temperature and other extended channels.
2009-06-15 19:40:47 +00:00
David A. Mellis
2fa8deb92d
First integration of the Arduino code in Processing 5503: PreProcessor and Compiler have been integrated with changes to the Sketch.
...
Compilation still has problems (Thread error on success, and can't handle non-pde files in a sketch).
Modified the Mac OS X make.sh to copy the hardware, avr tools, and example over.
Removing some of the antlr stuff.
Disabling the Commander (command-line execution) for now.
Added Library, LibraryManager, and Target.
Added support for prefixed preferences (e.g. for boards and programmers).
2009-06-01 08:32:11 +00:00
