Alessio Morale
3c2300ffda
OP-1275 Change several parameters const
2014-09-16 00:42:50 +02:00
Alessio Morale
0682e60053
OP-1275 Add a memory barrier before remapping the vector table
2014-09-16 00:42:50 +02:00
Alessio Morale
baad216810
OP-1275 uncrustification
2014-09-16 00:42:50 +02:00
Alessio Morale
55d52ceab0
OP-1275 Working initial PIOS_I2C implementation
2014-09-16 00:42:50 +02:00
Alessio Morale
cd7c76aa13
OP-1275 move implementation specific enums out of common pios_i2c_priv.h
2014-09-16 00:42:50 +02:00
Alessio Morale
5986e72a29
OP-1275 Add SPI Implementation. DMA block transfer needs to be fixed with handling for LDMA_TX and LDMA_RX
2014-09-16 00:42:49 +02:00
Alessio Morale
2ca1adafe5
OP-1275 support HSI oscillator, fix gpio, usart and sys (vector remapping not working yet)
2014-09-16 00:42:49 +02:00
Alessio Morale
7a3bc518c2
OP-1275 fixes unused vars in SPL
2014-09-16 00:42:49 +02:00
Alessio Morale
bb7d4aef04
OP-1275 fixes for ld scripts, fix for pios_delay timer setup. pios_sys
2014-09-16 00:42:49 +02:00
Alessio Morale
4d1e8cf5a7
OP-1275 F0 support: fix make scripts, bootloader size, linker scripts, add other missing pios drivers.
2014-09-16 00:42:49 +02:00
Alessio Morale
5ab9806279
OP-1275 add Stack_Change support
2014-09-16 00:42:48 +02:00
Alessio Morale
5a60c254ed
OP-1275 copy relevant F1 PiOS drivers (yet unmodified)
2014-09-16 00:42:48 +02:00
Alessio Morale
7eca9f80e3
OP-1275 Initial commit for f0 support: add CMSIS, Std Peripheral drivers
2014-09-16 00:42:48 +02:00
Alessio Morale
b4c1a856c7
OP-1274 Implement 4 bytes aligment for standard malloc (while keeping 8byte alignment for RTOS Stuctures) as done for M3
2014-09-16 00:42:48 +02:00
Fredrik Larrson
d91db0af6f
Revert "Merge remote-tracking branch 'origin/proff/OP-1373_DSMFixes' into next"
...
This reverts commit a39e393274
, reversing
changes made to ebfdaf28b5
.
2014-09-08 02:31:02 +10:00
Fredrik Larrson
a39e393274
Merge remote-tracking branch 'origin/proff/OP-1373_DSMFixes' into next
...
Conflicts:
shared/uavobjectdefinition/hwsettings.xml
2014-09-08 01:54:59 +10:00
Fredrik Larrson
ebfdaf28b5
Merge remote-tracking branch 'origin/havyan/OP-1473_sbus_eof' into next
2014-09-08 01:35:39 +10:00
Alessio Morale
cf9329b8ee
OP-1440 - Change timing slightly to support also WS2812B
2014-09-06 12:12:11 +02:00
Alessio Morale
233dec6d8d
OP-1379 - Various fixes and additions
...
- Support blocks of led for notification (that is a certain number of leds between a min and a max index);
- Fix an issue with bogus colours on fast updates at LED N°0.
- Add NOTIFY_SEQUENCE_NULL to skip handling a specific alarm status;
- Adjust sequences and add Config and Receiver Alarms;
- fix issue with Alarm trigger/repetition;
- Enables Notify module only if a WS281x output is enabled.
- Add some documentation for sequence/alarm definitions (sequences.h)
- Make sequences more coherent. All GPS related info are now shown in green.
- Revert to original blinking rate for onboard led
- add Notify on DiscoveryF4Bare target
2014-09-06 12:11:53 +02:00
Karl Knutsson
ec0d44e1b0
OP-1473 Fix EOF handling for R7008SB
2014-09-04 18:15:36 +02:00
Corvus Corax
b64326208e
Merge branch 'next' into corvuscorax/OP-1456_struct_to_array_improvement
2014-08-31 18:43:48 +02:00
Corvus Corax
6faf1a73ac
OP-1456 get rid of cast_struct_to_array because it is error prone!
2014-08-24 00:16:34 +02:00
Stefan Karlsson
3d8d803c33
OP-922 Fix missing ppm_id to ppm_out_id rename
2014-08-16 16:58:16 +02:00
Stefan Karlsson
34983a2d28
OP-922 Fix typo in pios_tim.c
2014-08-16 16:58:15 +02:00
Stefan Karlsson
22e981ea87
OP-922 Mark PIOS_DEBUG_Panic with attribute noreturn
2014-08-16 16:57:50 +02:00
Alessio Morale
30df5de332
uncrustify
2014-08-13 15:54:52 +02:00
Alessio Morale
cefc182a5e
Merge remote-tracking branch 'origin/amorale/OP-1405_25qXXX_support' into next
2014-08-13 15:25:16 +02:00
Alessio Morale
1067ea59d1
OP-1379 - Split pios_ws2811.h in config and public api header
2014-08-12 22:19:30 +02:00
Alessio Morale
1f74977472
OP-1379 add base types for colour, Initial ext rgb led api definition
2014-08-12 09:44:44 +02:00
Corvus Corax
c5fae5ee84
Merge branch 'next' into andrecillo/OP-1317_IMU_wind_estimation
2014-08-09 10:43:48 +02:00
Gasté Olivier
dfb21482f4
DSM protocol improvement
...
added item in DSM protocol in GCS
2014-08-08 13:14:39 +02:00
Alessio Morale
a6502518be
OP-1405 - Add support for 25qxxx series of flash memories
2014-08-02 23:05:36 +02:00
Alessio Morale
6a3cb7b808
OP-1403 - Add support for multiple hmc* devices
2014-08-02 20:48:41 +02:00
Alessio Morale
57a43a5587
OP-1403 - Migrate to new HMC5x83 driver and remove old HMC5883 one
2014-08-02 20:48:34 +02:00
Alessio Morale
2a8429320d
OP-1403 - Support HMC5983 temperature sensor/compensation
2014-08-02 20:48:24 +02:00
Alessio Morale
3c1b689224
OP-1403 - Add generic I2C/SPI HMC5x83 mag driver
2014-08-02 20:48:16 +02:00
Corvus Corax
5edb2dbae3
Merge branch 'andrecillo/OP-1317_IMU_wind_estimation' into corvuscorax/OP-1317_IMU_wind_estimation
2014-07-26 17:01:03 +02:00
Andres
d6a93cccaf
OP-1317 added M_2PI_F and M_2PI_D constants for 2*pi in pios_math.h
2014-07-23 08:03:12 +02:00
Alessio Morale
6c38eda192
OP-1395 - Reset log num when changing flight num. fix flight num update logic
2014-07-09 23:05:38 +02:00
Alessio Morale
61d26d7fd8
op-1395 - automatically increment flight number after disabling log.
2014-07-09 08:39:32 +02:00
Alessio Morale
03d03cfb06
OP-1395 add a vTaskDelay when waiting for dma transfer to complete when using FreeRTOS.
2014-07-08 02:54:17 +02:00
Alessio Morale
711c3609b6
OP-1395 - Add support for Fast read, explicitly set SPI clock speed to maximum allowed by all parts used
2014-07-08 02:53:25 +02:00
Alessio Morale
55b325966a
OP-1395 - Pack several objects on a single Debug Log "slot", after ten consecutive failures (log full) gives up trying to save to prevent wasting time. Use PIOS_Delay for timestamp
2014-07-08 02:47:09 +02:00
Alessio Morale
c6a773363f
Merge branch 'amorale/OP-943_add_malloc_for_ccsram' into next
...
Conflicts:
flight/pios/common/pios_adxl345.c
make/apps-defs.mk
2014-06-22 19:31:03 +02:00
Alessio Morale
a03ad41bab
Merge branch 'amorale/OP-1365_pios_instrumentation' into next
...
Conflicts:
flight/modules/Attitude/attitude.c
2014-06-22 19:13:46 +02:00
Alessio Morale
263fd64ab5
Merge branch 'amorale/OP-1274_freertos_v8.0.0' into next
2014-06-22 16:06:21 +02:00
Alessio Morale
fa24d21237
OP-1365 fix comments
2014-06-18 02:01:16 +02:00
Alessio Morale
eb5deb3eca
OP-1274 Remove unneeded cast from task name in xTaskCreate call
2014-06-18 01:47:43 +02:00
Alessio Morale
61f71add4c
OP-943 add missing pios_mem.c from previous commit
2014-06-11 23:54:28 +02:00
Alessio Morale
b3b90f1f66
OP-943 inline pios_mem function have issues with simposix.
2014-06-11 22:15:40 +02:00
Alessio Morale
6226aec2a7
OP-943 uses pios_mem API for heap allocation
2014-06-11 22:15:40 +02:00
Alessio Morale
50bef2dc12
OP-943 change make scripts to defines automatically PIOS_TARGET_PROVIDES_FAST_HEAP when available
2014-06-11 22:15:40 +02:00
Alessio Morale
d8f08a7916
OP-943 Add Malloc for "FastHeap" (ccsram)
...
- Use a separate mallocs for thread stack and RTOS structures heap
- Add a pios_mem API to be able to use fast ram (CCM) when available
2014-06-11 22:15:30 +02:00
Alessio Morale
622519b7c2
OP-1365 Flight code instrumentation API: add documentation to pios_instrumentation_helper, uncrustification
2014-06-10 22:13:20 +02:00
Alessio Morale
8ba5741f99
OP-1365 Flight code instrumentation API: Add some helper macros to simplify the addition of instrumentation code to a module.
...
Note: Look at next commit for an example use case.
2014-06-10 21:34:33 +02:00
Alessio Morale
698d132f9c
OP-1365 Flight code instrumentation API: Changed API to use handlers (opaque pointers) to counter struct instead of an index, fix Search function, create does check if coutner exists and return existing handler
2014-06-10 21:24:28 +02:00
Alessio Morale
07d2e27276
OP-1274: Update to FreeRTOS 8.0.1
2014-06-10 19:42:11 +02:00
Alessio Morale
ee8ffed465
OP-1274: Force 8 bytes alignment for RTOS structures while using 4 bytes alignment for the remaining memory allocation operations to save RAM
2014-06-10 19:10:37 +02:00
Alessio Morale
92b48b09ff
OP-1227 Fix high CPU usage: remove oversample buffer calculation in several part of pios_adc all over the code.
2014-06-09 19:28:22 +02:00
Alessio Morale
7acb0ad385
OP-1227 Fix high CPU usage: Apply missing parenthesis to prevent a fdiv for temp calculatin
2014-06-08 22:02:10 +02:00
Alessio Morale
a9f1d55fea
OP-1227 Fix high CPU usage: Optimize Memory usage in ADC driver.
...
- performs undersampling in two steps operating with a half buffer at time;
- Skip costly undersampling for Temperature channel;
- some optimizations to the downsample loops;
- apply compiler speed optimization to PIOS_ADC_downsample_data()
2014-06-08 22:01:05 +02:00
Alessio Morale
a0d68c6afb
OP-1227 Fix high CPU usage: Reduce Accel rate to 1600Hz, optimize sample reading, explicitly set bus speed
...
Note: Counter 0xA3450001 is the time it takes to transfer the requested number of samples
2014-06-08 21:33:18 +02:00
Alessio Morale
197d381937
OP-1365 Flight code instrumentation API: Add helper function to track mean period between its calls
2014-06-07 18:11:34 +02:00
Alessio Morale
9db264a457
OP-1365 Flight code instrumentation API: Add CopterControl support
2014-06-07 00:47:06 +02:00
Alessio Morale
1c92edb18b
OP-1365 Flight code instrumentation API: Fix min/max handling
2014-06-06 22:38:49 +02:00
Alessio Morale
520e721bdd
OP-1365 Flight code instrumentation API: PiOS Implementation
2014-06-06 22:15:18 +02:00
Alessio Morale
af8fe1f921
OP-1274 Fixes for Simposix
2014-05-18 22:56:57 +02:00
Alessio Morale
36e304f579
OP-1274 fixes for revolution
2014-05-18 22:56:48 +02:00
Alessio Morale
e9fff2b6fa
OP-1274 fixes for OPLink
2014-05-18 22:56:44 +02:00
Alessio Morale
be5cc66bd3
OP-1274 fixes for Coptercontrol firmware
2014-05-18 22:56:29 +02:00
Alessio Morale
921abb5131
OP-1274 update freertos files. Architecture specific files are left into their original FreeRTOS folder structure
2014-05-18 22:53:23 +02:00
Alessio Morale
58bba31c72
Merge remote-tracking branch 'origin/amorale/OP-1312_pios_ws2811_driver' into next
2014-05-15 20:30:43 +02:00
Alessio Morale
8bbb56337b
OP-1312 keep pulse timings low to have more margin to handle bus contentions and irq response time.
2014-05-11 18:57:06 +02:00
Alessio Morale
3c5a41049b
Merge branch 'amorale/OP-1302_updated_led_behaviour' into next
2014-05-11 12:01:53 +02:00
Alessio Morale
e5d6726bb6
Merge remote-tracking branch 'origin/next' into amorale/OP-1302_updated_led_behaviour
2014-05-08 22:27:08 +02:00
Alessio Morale
19caa57dc6
OP-1312 fix copy/paste-naming issue
2014-05-03 11:45:30 +02:00
Alessio Morale
3897106f4d
OP-1312 remove boilerplate from config using macros.
...
Use four locations for ch1+update dma source to exploit fifo and memory read bursts
2014-05-01 10:33:44 +02:00
Alessio Morale
4cece04166
OP-1312 fix documentation, get rid of stale comments from previous implementations
2014-04-27 19:12:36 +02:00
Alessio Morale
58178ab193
OP-1312 Fixed led boundary check and framebuffer color order.
2014-04-27 19:11:28 +02:00
Alessio Morale
c281420e25
OP-1307 Most(all?) F4Discovery has an "A" revision of STM32f4.
...
Disable prefetch to overcome the "Section 2.1.1: ART Accelerator prefetch queue instruction is not
supported" issue (DM00037591.pdf)
2014-04-26 22:14:47 +02:00
Alessio Morale
a0b857337f
OP-1312 Add support for Revolution (right now always active on pin3). Configurability not yet added
2014-04-26 18:40:59 +02:00
Alessio Morale
db9435b5ed
OP-1312 add a switch to include/exclude the driver
2014-04-26 17:28:49 +02:00
Alessio Morale
46f70a74c8
OP-1312 Initial version running on DiscoveryF4
2014-04-26 16:57:16 +02:00
Alessio Morale
0aa9ef4b57
OP-1307 Bare f4 discovery platform with no sensor, for development pourpose
2014-04-22 23:46:27 +02:00
Alessio Morale
f01cf66095
Merge remote-tracking branch 'origin/andrecillo/OP-1273_OP-1282_OP-1283_Diverse_Airspeedsensor_improvements' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/systemhealth/systemhealthgadgetwidget.cpp
2014-04-15 21:52:34 +02:00
Alessio Morale
82139a6e44
Merge remote-tracking branch 'origin/amorale/OP-1294_fix_stacks_heap_cc' into next
2014-04-15 21:46:26 +02:00
Alessio Morale
299f388245
OP-1302 Add a stub pios_notify API for user interaction/notifications
...
right now all notifications produces the same output, the DRAW_ATTENTION sequence
2014-04-13 17:42:57 +02:00
Philippe Renon
3b7b06aad0
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2014-04-09 09:11:54 +02:00
Philippe Renon
1b356341c7
OP-1033 pios_rfm22b.c will not be messed up by uncrustify anymore :)
2014-04-09 09:06:18 +02:00
Philippe Renon
ec1ecc020e
OP-1033 attempt at fixing the f1 usb buffer configuration (current configuration has overlapping buffer that cause tx errors)
2014-04-08 21:51:11 +02:00
Alessio Morale
1aefc61bc4
OP-1294 Resize stack for CallbackScheduler.
2014-04-07 00:31:48 +02:00
Andres
9b8be63a4f
OP-1273 OP-1282 OP-1283 added delay to I2C Transfer function for both stm32f40x and stm32f10x
2014-04-02 14:18:42 +02:00
Alessio Morale
6540c69698
Merge remote-tracking branch 'origin/andrecillo/OP-1273_PixHawk_airspeed_sensor_MS4525DO' into next
2014-04-01 22:05:12 +02:00
Andres
830f13596e
OP-1273 OP-1282 OP-1283 uncrustify
2014-03-31 22:17:58 +02:00
Andres
5ed417323e
OP-1273 OP-1282 OP-1283 bug fixes on I2C library: check for intialization and hot-plug robustness
2014-03-31 22:16:29 +02:00
Andres
7067f4f8ff
Merge branch 'andrecillo/OP-1283_SystemHealthGadgetWidget_updateAlarms_coordinate_calculation_correction' into andrecillo/OP-1273_OP-1282_OP-1283_Diverse_Airspeedsensor_improvements
...
Merged correction on coordinate calculation in SystemHealth gadget for correct display of Airspeed-Alarm
2014-03-28 17:01:44 +01:00
Corvus Corax
5866983ba3
Merge remote-tracking branch 'origin/Bertrand/OP-1272_Fix_STM32F4_Watchdog_Freeze_In_Debug_Mode' into next
2014-03-27 22:33:32 +01:00
Andres
c5dc556a43
OP-1273 Uncrustify
2014-03-27 16:19:22 +01:00
Andrés Chavarría Krauser
4dff86dc9c
OP-1273 New files for the MS4525DO PixHawk speed sensor: PIOS files and module files
2014-03-25 10:37:10 +01:00
Andrés Chavarría Krauser
f8f53d8801
OP-1273 Adaptations to include MS4525DO PixHawk speed sensor
2014-03-25 09:18:25 +01:00
Bertrand Oresve
ea665d1270
OP-1272 Fix STM32F4 Watchdog in debug mode
2014-03-22 18:44:47 +01:00
Andrés Chavarría Krauser
4512798213
OP-1271 Added a length and NULL pointer check in go_starting() to manage zero length reads/writes
2014-03-22 12:52:49 +01:00
Alessio Morale
519d74ad1b
OP-1026 fix review issues
2014-03-09 16:08:27 +01:00
Philippe Renon
4f42a1e950
OP-1033 added TODOs to validate that f1 USB end points configuration is consistent
2014-03-03 20:54:45 +01:00
Philippe Renon
e9dc5fac9a
OP-1033 added more descriptive comment for usb end points (f1)
2014-03-02 14:51:34 +01:00
Philippe Renon
9a0f28d138
OP-1033 removed useless self inclusion of f4 usb_conf.h
2014-03-02 14:47:17 +01:00
Philippe Renon
b2168a4982
OP-1033 moved f1 specific usb include files to stm32f10x/inc directory
2014-03-02 14:46:01 +01:00
Alessio Morale
73d0b93829
OP-1026 Add a task monitor api to calculate idle percentage
2014-02-22 00:29:02 +01:00
Corvus Corax
e97ce303b8
Merge branch 'corvuscorax/OP-942_task-diagnostics-for-callbacks' into next
2014-02-18 00:03:07 +01:00
Alessio Morale
3044185019
Merge remote-tracking branch 'origin/amorale/OP-1218_pios_com_thread_safe' into rel-14.01
...
Conflicts:
flight/modules/RadioComBridge/RadioComBridge.c
2014-02-17 15:24:50 +01:00
Alessio Morale
da5ef3b3cc
OP-1218 Raise time PIOS_COM_SendBuffer waits to acquire sendbuffer semaphore
2014-02-15 22:05:56 +01:00
Alessio Morale
8cd5cfe2eb
OP-1218 format/consmetic/comments fixes
2014-02-15 22:05:56 +01:00
Alessio Morale
1ba5dbaca8
uncrustify
2014-02-10 22:57:24 +01:00
Alessio Morale
fd92e2a497
Merge remote-tracking branch 'origin/amorale/OP-1218_pios_com_thread_safe' into rel-14.01
2014-02-10 20:52:15 +01:00
Alessio Morale
79b68ae886
OP-1218 locks SendBuffer under the same mutex as SendBufferNonBlocking
2014-02-09 19:57:05 +01:00
Alessio Morale
67117d228d
OP-1149 change POW2 as POW2(0) led to undefined results
2014-02-09 12:05:40 +01:00
Alessio Morale
1569881e94
OP-1149 Remove shifts as they can have bad behaviours for negative numbers.
...
Documents correction algorithms as described in ms5611 documentation
2014-02-09 12:05:32 +01:00
Alessio Morale
5fa390ec9d
OP-1149 fix low temperature compensation formula
2014-02-09 12:05:28 +01:00
Alessio Morale
590c27af29
OP-1218 fix thread safety issue with pios_com PIOS_COM_SendBufferNonBlocking
...
(kudos @filnet for finding this)
2014-02-09 11:37:02 +01:00
Corvus Corax
c74790b823
OP-942 correct reporting of callback stack overflows
2014-02-07 22:57:31 +01:00
Corvus Corax
7ec21a8f36
OP-942 duplicated exact API of task_monitor to also monitor callbacks
...
This allows cleaner and fine grained handling of STACKOVERFLOW alarms
2014-02-07 22:39:16 +01:00
Corvus Corax
9a6072d58c
Merge branch 'next' into corvuscorax/OP-942_task-diagnostics-for-callbacks
...
Conflicts:
flight/targets/boards/simposix/firmware/Makefile
2014-02-07 00:31:32 +01:00
Corvus Corax
6566a29054
OP-942 reliable and fast free stack test algorithm - will always 'see' overflows
2014-02-06 23:54:30 +01:00
Corvus Corax
c7ada40c2e
Merge branch 'corvuscorax/OP-1211_time_measurement_helper' into rel-14.01
2014-02-06 19:56:47 +01:00
Corvus Corax
216ec095e4
OP-1211 removed unneeded define
2014-02-06 19:34:34 +01:00
Corvus Corax
723e22aa1a
OP-1211 time_measurement_helper
2014-02-04 19:05:17 +01:00
Corvus Corax
cc04b780c5
OP-942 one possible but not well working implementation of stack end check
2014-02-04 17:53:51 +01:00
Corvus Corax
418f7e3d0f
OP-942 task diagnostics for callback scheduler
2014-02-03 01:00:07 +01:00
Corvus Corax
49a1c4c28f
OP-942 refactored callback scheduler to fit into PiOS naming scheme
2014-02-02 22:08:16 +01:00
Corvus Corax
5b9a17f630
OP-942 moved DelayedCallbackScheduler into pios/common
2014-02-02 20:31:37 +01:00
Corvus Corax
597ac4db2a
OP-1195 increase priority for pios radio link driver task
2014-02-02 14:09:50 +01:00
Alessio Morale
7188394e39
Uncrustification
2014-01-19 12:37:25 +01:00
Alessio Morale
745a9e8853
Merge remote-tracking branch 'origin/fnurgel/OP-1148_r7008sb_sbus_protocol_fix' into next
2014-01-18 14:21:57 +01:00
Corvus Corax
41202a0227
Merge branch 'corvuscorax/OP-1022_AH_improvements_amorale' into next
2014-01-15 22:47:42 +01:00
Philippe Renon
c8a81f88a4
OP-1122 OP-1158 added facility to update a CRC with uavobject data (flight side)
2014-01-12 15:12:41 +01:00
Mikael Blomqvist
b1d2c1b83e
Adding R7008SB end byte as a possible end of frame check for S.Bus
2014-01-03 18:25:44 +01:00
Philippe Renon
d668153b6d
OP-1122 OP-1125 fixed copy/paste error in rfm22b flight code
2013-12-14 16:03:42 +01:00
Alessio Morale
29df9d6dad
OP-1139: Add some more descriptive names and comments for compensation variables
2013-12-13 17:10:11 +01:00
Alessio Morale
13b45b2b78
OP.1139: uncrustify
2013-12-10 01:44:13 +01:00
Alessio Morale
75842cb648
OP-1139: perform second order low temperature compensation.
...
It follows the procedure described in MS5611 datasheet(http://www.meas-spec.com/downloads/MS5611-01BA03.pdf , page 8)
to perform low(20°) and very low(-15°C) temperature compensation.
2013-12-10 01:21:05 +01:00
Corvus Corax
25fd3d5740
Just uncrustification
2013-11-26 00:43:02 +01:00
Fredrik Arvidsson
2fc34910e0
OP-1119 Fix in pios function for debuglogging uavo.
2013-11-26 00:36:59 +01:00
Corvus Corax
be9faabe92
Merge branch 'next' into corvuscorax/onboardlogging
2013-11-26 00:34:01 +01:00
Alessio Morale
bacc4d3d79
Merge branch 'master' into next
...
Conflicts:
flight/targets/boards/oplinkmini/firmware/pios_board.c
ground/openpilotgcs/copydata.pro
2013-11-25 01:12:10 +01:00
Corvus Corax
18ad56d4ed
removed identical files from pios/posix (use files from common instead)
2013-11-24 15:40:32 +01:00
Corvus Corax
89afbde58a
initialized log packages with 0xff instead of 0x0 to reduce flash wear
2013-11-24 15:36:26 +01:00
Corvus Corax
fcc479f5cb
more intelligent log interfacing, including flash formatting option
2013-11-17 20:14:50 +01:00
Corvus Corax
6031200aea
Some fixes in debuglog to compile and run on all firmware platforms
2013-11-17 18:04:47 +01:00
Corvus Corax
a0746d87fa
Logging facility: logs debug data to logfs and exports it through container UAVObject
2013-11-17 02:54:26 +01:00
Corvus Corax
adfbdfae38
Make use of (now supported) standard snprintf in stdarg-printf when used in logfs
2013-11-17 02:49:53 +01:00
Corvus Corax
314d526e94
corrected instance id encoding in filename to not conflict with metadata uavobject ids
2013-11-16 18:55:54 +01:00
Corvus Corax
00321b09dc
Modified uavobjectmanager to only use logfs calls for UAVObject flash transactions, abstracted dosfs calls to use logfs wrapper class for simpiosix and SD-card access
2013-11-16 17:30:40 +01:00
Corvus Corax
86aa993d24
changed port increment tick function for new freertos
2013-10-18 23:07:23 +02:00
mathieu
fb1f58c94b
Merge branch 'next' into Mathieu/OP-1079_Update_to_FreeRTOS_v7_5_2
2013-09-11 18:57:37 -07:00
Mathieu Rondonneau
03b243fe31
OP-1079 - Update to FreeRTOS v7.5.2
2013-09-04 20:26:23 -07:00
Alessio Morale
e91bc28667
OP-1058 Get rid of Unions.
...
They caused stack usage increase with -fstrict-aliasing as stack slots are not reused when dealing with unions.
It has now been added the cast_struct_to_array macro in pios_struct_helper.h to handle such case where it is useful to access those homogeneous structs as arrays
+review OPReview-552
2013-09-01 12:10:55 +02:00
Brian Webb
5ac1f33c47
Adds missing pios_gpio_priv.h
2013-08-02 22:01:44 -07:00
Brian Webb
e246ecf536
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
2013-07-28 07:01:08 -07:00
Richard Flay (Hyper)
c3e3521001
OP-1049: Hotfix to 13.06.02 for MPU6000 FIFO overflow on CC3D when board initialisation takes
...
longer than 150ms.
2013-07-28 01:16:22 +09:30
Alessio Morale
11bc7804d0
Merge branch 'amorale/OP-994_adc_cleanup' into next
2013-07-16 12:23:25 +00:00
Brian Webb
c2df59498b
Merge remote-tracking branch 'origin/master' into next
2013-07-06 07:08:30 -07:00
Brian Webb
0d02df4d02
Uncrustified OPLink code.
2013-07-05 18:49:26 -07:00
Brian Webb
d0d8a0aadd
OP-932 Adds PWM outputs to OPLinkMini. Both gpio pins on the main and/or flexi port can be configured to output PWM for a total of up to 4 PWM outputs.
2013-07-03 18:58:34 -07:00
Alessio Morale
89cb294218
OP-994 Move pios_architecture,h include in pios,h
...
+review OPReview-506
2013-07-02 19:26:39 +02:00
Brian Webb
c76ee7de9d
OP-932 Fixes the failsafe that detects when the Rx modem loses sync with the Tx modem. This was not working on one-way mode.
2013-06-30 16:08:50 -07:00
Brian Webb
491e5fe685
Adds a failsafe on PPM output on OPLink that kicks in when the link goes down. Also updates all air datarate settings and adds new 64 and 100 kbps modes.
2013-06-29 15:00:38 -07:00
Brian Webb
d5f16faaec
OP-932 Fixes the datarate used on PPM only mode, and fixes failsafe on PPM output on OPLM.
2013-06-26 20:11:39 -07:00
Brian Webb
caa8d3e70e
OP-932 Forces one-way to be set when PPM only is configured.
2013-06-26 18:02:08 -07:00
Brian Webb
2aea2342ab
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
2013-06-26 18:01:54 -07:00
Brian Webb
b25ba75fd9
OP-932 Removed obsolete include of pios_rfm22b_rcvr from pios.h.
2013-06-26 18:00:22 -07:00
Brian Webb
44a0266e41
OP-932 Adds claiming of the SPI bus in the OPLink channel change function.
2013-06-26 18:00:02 -07:00
Brian Webb
56a60f2983
OP-932 Updates the 19.2 kbps datarate using the spreadsheet.
2013-06-26 17:59:49 -07:00
Brian Webb
61c453f6ff
Removes several of the air datarate settings, and fine tunes the calculation of the max packet length from the datarate and packet time. 9600, 19200, 36400, and 57600 modes tested. Tested 19200 in one-way mode for PPM only.
2013-06-26 17:59:33 -07:00
Brian Webb
cdd51537f1
Fixes the 9600 bps air datarate for the RFM33B modem.
2013-06-26 17:57:46 -07:00
Brian Webb
fc0328a3cd
OP-932 Adds working one-way mode to the OPLink radio connection. In this mode, packets will only flow from the ground side (coordinator modem) to the flight side modem.
2013-06-26 17:57:32 -07:00
Brian Webb
774a74884a
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
2013-06-26 17:57:11 -07:00
Brian Webb
8c370df319
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
2013-06-26 17:56:56 -07:00
Brian Webb
08efc8d152
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
2013-06-26 17:56:20 -07:00
Brian Webb
7c10623615
OP-932 Adds a semaphore to PPM input to signal when a new frame has been received. This can be used to process a new frame with as low a latency as possible.
2013-06-26 17:56:10 -07:00
Brian Webb
ac75af55c1
OP-932 Moves the PIOS_PPM_OUT_Set function from pios_ppm_out_priv.h to pios_ppm_out.h
2013-06-26 17:55:56 -07:00
Alessio Morale
0b8d18ae49
OP-994 Move common defines to architecture specific header
...
+review OPReview-506
2013-06-24 18:50:44 +02:00
Corvus Corax
6163c5f53a
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
...
Conflicts:
flight/modules/AltitudeHold/altitudehold.c
ground/openpilotgcs/share/openpilotgcs/pfd/default/AltitudeScale.qml
ground/openpilotgcs/share/openpilotgcs/pfd/default/PfdIndicators.qml
ground/openpilotgcs/share/openpilotgcs/pfd/default/SpeedScale.qml
ground/openpilotgcs/src/plugins/pfd/pfdgadgetwidget.cpp
2013-06-22 18:44:03 +02:00
Alessio Morale
5cc3645b96
Uncrustify
2013-06-18 20:23:46 +02:00
Alessio Morale
2b232ae155
Fix bootloader usb issues caused by USB reconnection fixes.
...
Issues were related to missing usb detection and broken communication while updloading fw.
They are now skipped in NON FreeRTOS mode (aka bootloader).
+review OPReview
2013-06-17 20:24:07 +02:00
Corvus Corax
1d17d08cca
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
2013-06-12 18:32:01 +02:00
Alessio Morale
ad123a2761
Merge remote-tracking branch 'origin/amorale/OP-980_connection_reliability_issue' into next
2013-06-11 15:39:34 +02:00
Alessio Morale
2c0f7794a9
Merge remote-tracking branch 'origin/amorale/OP-997_revolution_settings_to_ext_flash' into next
2013-06-11 15:39:13 +02:00
Alessio Morale
f767d64f0c
OP-980 Remove the timeout logic as it causing troubles with windows
...
platform
2013-06-11 10:27:32 +02:00
Corvus Corax
88071b1078
Merge remote-tracking branch 'next' into corvuscorax/OP-947_stateestimator-module
2013-06-09 22:43:25 +02:00
Corvus Corax
6f59c49506
just uncrustification
2013-06-09 22:09:04 +02:00
Alessio Morale
e9b3ee52f3
OP-997: add fields to SystemStatsUavo to monitor storage status
2013-06-09 19:20:00 +02:00
Corvus Corax
218e15ce61
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
2013-06-09 17:24:08 +02:00
Alessio Morale
87db5d30b0
OP-980 change how the semaphore is used on PIOS_USB_CheckAvailable to prevent deadlocks
2013-06-09 16:14:44 +02:00
Corvus Corax
022f1a1ac0
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
...
Conflicts:
flight/modules/Attitude/revolution/attitude.c
2013-06-09 13:49:52 +02:00
Alessio Morale
107b930573
Merge remote-tracking branch 'origin/amorale/OP-980_revolution_usb_reconnect' into next
2013-06-09 09:07:24 +02:00
Alessio Morale
ab1c9c157f
OP-995: Fixes for correct battery monitor readout
2013-06-08 13:40:01 +02:00
Alessio Morale
51a7f27b99
OP-994 Add an API to PIOS_ADC to get directly the Voltage value
2013-06-08 13:36:54 +02:00
Corvus Corax
6fdf554d4a
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
...
Conflicts:
flight/modules/Attitude/revolution/attitude.c
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
shared/uavobjectdefinition/attitudesettings.xml
2013-06-06 19:25:54 +02:00
Alessio Morale
ee7887c406
OP-980 Extended the memory barrier macros and fixed barrier kind in pios_usb_hid
...
+review OPReview-501
2013-06-06 10:26:41 +02:00
Mathieu Rondonneau
45391abd55
OP-976: RE-run uncrustify
2013-06-05 19:48:56 -07:00
Mathieu Rondonneau
a8c946dcb2
OP-976: Fix uncrustify changes that put a space before the ";" in the macro
2013-06-05 19:46:55 -07:00
Mathieu Rondonneau
d2fae1abed
OP-976: fixing function name in the macro although don't have any effect since the linker directives are local.
2013-06-05 19:15:47 -07:00
Alessio Morale
c340bfc294
OP-980 Insert locking while checking status in PIOS_USB_CheckAvailable
...
+review OPReview-501
2013-06-06 01:42:26 +02:00
Alessio Morale
5fa73624da
OP-980 Added memory barrier to preserve sequence to ensure callback validation
...
+review OPReview-501
2013-06-06 01:39:45 +02:00
Corvus Corax
6f6ca2481e
Changed CoordinateConversion to use doubles for LLA2NED conversion, so coordinates can be represented in ECEF with sufficient resolution
2013-06-05 20:40:49 +02:00
Alessio Morale
b4f8b02a42
Revert "some optimizations, use real rx and tx buffer size instead of max buffer leghts"
...
It does not work in Windows so need further investigation prior to undo this revert
This reverts commit 901db6f828
.
+review OPReview-501
2013-06-05 19:01:01 +02:00
Alessio Morale
8fb81ae17b
OP-980 uncrustify
...
+review OPReview-501
2013-06-05 01:02:37 +02:00
Alessio Morale
f1f48b0ec6
OP-980 Fix usb reconnection issue for Revolution target.
...
step 3: add a timeout on rx_active to prevent rx locks
2013-06-05 00:54:08 +02:00
Alessio Morale
901db6f828
some optimizations, use real rx and tx buffer size instead of max buffer leghts
2013-06-05 00:53:50 +02:00
Alessio Morale
ce2bce353f
OP-980 Fix usb reconnection issue for Revolution target.
...
step 2: check for cable disconnection (vbus) and issue a SW reconnection
2013-06-05 00:04:26 +02:00
Mathieu Rondonneau
23b2907d08
OP-976: Add the ';' back
...
This compile successfuly with make all_flight
2013-06-03 20:37:40 -07:00
Alessio Morale
14b87383b9
OP-980 Fix usb reconnection issue for Revolution target.
...
step 1: reset tx/rx_active flags on disconnection/reconnection
2013-06-04 01:52:44 +02:00
Brian Webb
e9f83bcc80
Fixes a bug in the rfm22b driver that was reading past the end of the bindings list when receiving a status message. Also adds some formatting changes that came about after doing a make uncrustify_all.
2013-05-26 08:36:38 -07:00
Corvus Corax
40864b2d3b
some cleanups
2013-05-23 21:21:14 +02:00
Corvus Corax
843db63cf6
some last issues from review
2013-05-22 23:08:48 +02:00
Brian Webb
ac4847c8ac
OP-932 Moves the configuration of the com ports on the coordinator OPLink to startup.
2013-05-21 19:48:21 -07:00
Brian Webb
dbce08a151
OP-932 Changes the radio task loop to loop every 1ms, and reduces the tx transmit period back down to 8ms. Also reduces the Tx windows to 1ms for each modem, and reserves the latter half of the Tx window for channel changing.
2013-05-21 17:40:05 -07:00
Brian Webb
d4a4588011
OP-932 Changes the RFM22 frequency hopping to change channels every Tx period. Also increases the Tx clock period from 8ms to 16ms, and adds a check on calculation the the time delta that it doesn't change the previous estimated time delta by too much. If the delta between the current time delta and the previously estimated time delta is too large it could indicate that there was a delay somewhere that makes the calculated time delta inaccurate.
...
Rearanges the packet send priority in the rfm22b driver so that PPM packets are top priority.
2013-05-20 20:49:24 -07:00
Sexy Pony
900f643bbd
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
Alessio Morale
ab7af16be3
Merge branch 'amorale/OP-901_lib_udates-usb_fixes' into HEAD
...
Conflicts:
flight/pios/stm32f10x/library.mk
flight/targets/boards/revoproto/firmware/pios_board.c
2013-05-19 15:01:08 +02:00
Alessio Morale
37eabb0931
Pointed type is explicitly used with sizeof when dealing with struct pointers.
...
+review OPReview-474
2013-05-19 12:00:16 +02:00
Alessio Morale
2e458b5652
OP-901 USB OTG/Device Drivers are not targeted for f103 (they are targeted at f105) so move again to F4 library folder instead of common
2013-05-18 20:53:28 +02:00
Alessio Morale
3ec9447fdc
OP-901 Update CMSIS to r3p2-00rel1
2013-05-18 20:29:06 +02:00
Alessio Morale
c1f767b12d
Merge remote-tracking branch 'origin/amorale/OP-954_logfs_settings_in_internal_flash' into next
...
Conflicts:
flight/pios/common/pios_flashfs_logfs.c
2013-05-18 15:53:25 +02:00
Alessio Morale
66da2796e0
Merge remote-tracking branch 'origin/amorale/OP-905_revolution_watchdog_next' into next
2013-05-18 15:00:50 +02:00
Alessio Morale
aba64689a6
OP-901 removed stale core_cm3.c file
2013-05-18 14:25:37 +02:00
Alessio Morale
976ad90211
OP-901 Updated F4 CMSIS startup files, Moved USB OTG and USB Device library to common
2013-05-18 14:03:03 +02:00
Alessio Morale
f0c01d0eff
OP-901 Updated F4 StdPeriph Driver Library to V1.1.0
2013-05-18 13:57:45 +02:00
Alessio Morale
448e98b336
OP-901 Updated F1 StdPeriph Driver Library to v3.5.0
2013-05-18 13:55:43 +02:00
Brian Webb
bc4f615c25
Adds setting HSE_VALUE on all F1 targets (should only be necessary if the HSE clock is not 8MHz).
...
Moves the CMSIS system_stm3210x.c from library.mk to the individual Makefiles for the F1 targets. This allows for custom SystemInit functions where necessary.
2013-05-17 22:01:48 -07:00
Alessio Morale
67e41c34fc
Merge remote-tracking branch 'origin/next' into amorale/usb_fixes
2013-05-17 22:46:42 +02:00
Alessio Morale
2735f8a620
OP-901 Updated common CMSIS files
2013-05-17 22:41:34 +02:00
Alessio Morale
13ee42a42a
OP-901 Fixed errors due to unused parameter
2013-05-17 22:39:16 +02:00
Richard Flay (Hyper)
a6aedee9fa
Merge branch 'next' into brian/support_inverted_USB_vsense
2013-05-17 05:54:42 +09:30
Richard Flay (Hyper)
031ea3e069
Merge branch 'next' into brian/code_cleanup_130514
2013-05-17 05:49:38 +09:30
Alessio Morale
c80f01dff9
OP-954 Rename the legacy PIOS_INCLUDE_FLASH_SECTOR_SETTINGS to PIOS_INCLUDE_FLASH_LOGFS_SETTINGS
...
+review OPReview-470
2013-05-15 23:16:34 +02:00
Richard Flay (Hyper)
ae14c13195
Merge branch 'next' into hyper/OP-951_add--Wshadow-to-flight-CFLAGS
...
Conflicts:
flight/modules/ManualControl/manualcontrol.c
2013-05-16 06:28:56 +09:30
Richard Flay (Hyper)
ef5bb6f6fe
Merge branch 'next' into OP-950_spi_fixes_FreeRTOS
2013-05-16 05:41:09 +09:30
Brian Webb
156109bb88
Added support for an active low USB vsense line.
2013-05-14 20:37:13 -07:00
Brian Webb
1608d11416
Cleans up some compiler warnings/erros and adds missing ifdefs around some e.g. WDG calls.
2013-05-14 20:22:54 -07:00
Stacey Sheldon
280f537644
f4 usb: ensure that we NAK on unused OUT endpoints
...
The ST USB code will automatically receive on any
endpoint that is opened but not in the NAK state.
Make sure we set OUT endpoints to NAK initially.
It also happily writes via a NULL pointer in ep->xfer_buff
which writes to address 0x0000_0000. Since address
0x0 is aliased onto the internal flash by the BOOT0/1 pins
and the internal flash is (normally) in the LOCKED state,
this write puts the internal flash into an errored state.
This errored state means that writes to internal flash
are no longer allowed and all further writes fail.
2013-05-14 23:50:17 +02:00
Alessio Morale
8d57d8ff76
Internal flash settings for F1
...
Conflicts:
flight/pios/stm32f10x/pios_flash_internal.c
2013-05-14 22:58:05 +02:00
sambas
da23fd6784
Added F1 internal flash driver
...
Conflicts:
flight/pios/stm32f10x/pios_flash_internal.c
Conflicts:
flight/pios/stm32f10x/pios_flash_internal.c
2013-05-14 22:56:12 +02:00
Alessio Morale
707e648457
OP-905: Fixes. Prevent LogFS from triggering watchdog
2013-05-14 18:43:39 +02:00
Richard Flay (Hyper)
ed68fbe68d
OP-951: Adds -Wshadow to flight CFLAGS and fixes resulting compilation breakage.
...
+review OPReview
2013-05-14 07:01:45 +09:30
Oleg Semyonov
e5970ed25d
logfs: fix unit tests (requires MIN declaration from pios_math.h)
2013-05-12 03:51:00 +03:00
Alessio Morale
30b755b7aa
OP-901 fixed errors due to unused parameter and applied fix against fifo empty bug on usb_dcd_int.c
2013-05-11 23:49:52 +02:00
Alessio Morale
95a3e99b7c
OP-901 updated STM32 USB OTG Driver (updated configuration)
2013-05-11 23:12:14 +02:00
Alessio Morale
24fcea168c
OP-901 Updated STM32F4 USB Device Library
2013-05-11 23:12:13 +02:00
Alessio Morale
ccc24d844a
OP-901 updated STM32 USB OTG Driver
2013-05-11 23:10:47 +02:00