1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-04 12:24:11 +01:00
Commit Graph

1356 Commits

Author SHA1 Message Date
muralha
7a8484edfb Ground/ModelView: Fixed attitude rotation of the 3D model.
Euler rotation has problems with Yaw, so now it's using quaternion rotation.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2064 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-03 22:20:45 +00:00
edouard
48a3b6c569 OP-35 Firmware upload works (tested on mainboard). Use at your own risk! Not threaded yet, so UI kind of freezes during the process, but it works. Don't blame me if it fries your board, though...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2063 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-03 21:41:32 +00:00
edouard
ae22e9103b OP-35 Cleanup of the uploader gadget, and removal of the ymodem library which is not used anymore.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2062 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-03 18:46:17 +00:00
andrew
3e5797a8d2 Update the curve generation UI to have range of -1 to 1 for the pitch curve widget
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2061 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-03 04:30:54 +00:00
andrew
0a2cfbacc7 Updated MixerCurveWidget so that it can have ranges other than 0 to 1.
Default behaviour not changed.
New functions allow the setting of the max and min values for the curve.
0 to 1 range is needed when output is used for motors.
-1 to 1 range is needed when output is used for a servo.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2060 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-03 03:38:22 +00:00
edouard
7180c4fe2d OP-35 Further work on uploader gadget.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2057 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-01 20:50:59 +00:00
edouard
1e0c2eef22 OP-35 Boot button enabled, to get out of bootloader mode.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2056 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-01 20:02:59 +00:00
edouard
8d2c9c37fb OP-35 Fix complile issue on Win7 (please confirm), Halt button now puts the mainboard into bootloader mode. Nothing more...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2055 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-01 18:15:48 +00:00
edouard
e74927c244 OP-35 Uploader gadget: the "Reset" button now works. YMMV, please report. Other buttons do nothing so far. Also, small fix to uavtalk.cpp where a 'disconnect' call triggered segfaults on my system.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2054 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-01 14:06:33 +00:00
edouard
b4a22c5984 OP-35 New methods to suspend and resume USB polling by the Raw HID plugin. Required for the Uploader plugin.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2053 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-01 13:35:12 +00:00
edouard
f19439b1c7 OP-35 Add new method to connection manager to let a plugin initiate a disconnection. Needed for Uploader plugin.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2052 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-01 13:34:27 +00:00
edouard
dde66a3c24 OP-35 Preliminary work on the new DFU gadget. Not much to see so far.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2050 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-31 22:56:31 +00:00
edouard
6e0332eb10 New simple quad (X and +) design by Muralha, and series of simple backgrounds for the modelview gadget.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2049 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-31 21:14:24 +00:00
sambas
634543dc27 OP-52 Ground/GPS Display: some updates, ZDA&VTG
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2048 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-31 08:01:56 +00:00
andrew
206700830e Minor UI changes to ccpm config
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2047 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-31 06:10:19 +00:00
andrew
bc8ec75ed5 Updates to ccpm mixer ui.
the curve settings now update the MixerCurveWidgets when generated or manually edited.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2046 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-31 05:55:23 +00:00
andrew
beda5965bf added function to MixerCurveWidget to update an existing curve from code without deleting the existing one.
Using the initCurve function to update a widget that had a slot connected to its curveUpdated signal caused the app to crash.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2045 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-31 05:54:10 +00:00
pip
b6c0344a0f Added extra error checking - making sure the packet size is valid and that packet sizes match.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2040 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-30 15:00:55 +00:00
edouard
a05ed34e77 OP-138 Get rid of object scene removal warning on curve widget. Also delete objects properly when reseting the curve.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2037 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-30 10:41:41 +00:00
edouard
88a199d20e OP-138 Finishing touches to the custom mixer editor (curve reset buttons, value displays, etc.)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2036 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-30 10:16:01 +00:00
andrew
c7b6341b21 Improvements to the ccpm curve mixing UI
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2035 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-30 05:15:39 +00:00
edouard
dbe20a7eab OP-138 Editing of Custom mixer table checks for bounds (-127/127), and sending to ram/sd now works. This interface
should be more user friendly that the uavobjecteditor.




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2034 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-29 22:36:31 +00:00
edouard
739f4e468f OP-138 A few missing bits in the tricopter mixer settings, sorry...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2033 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-29 20:41:58 +00:00
edouard
e528cc306b OP-138 Support for Tricopter with yaw channel in the config gadget. Please please double check the mixer before flying, this is untested!
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2018 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 21:54:42 +00:00
peabody124
aada18a0ea UAVTalk: Update protcol version number to go with new packet format and changed
a few constants to make it self documenting

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2017 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 17:41:41 +00:00
peabody124
4570d6df23 UAVTalk: Insert a sync byte (0x3C) and the packet size to facilitating handling
by PipX modems.  This is a change to UAVTalk so GCS and the hardware must all
be updated.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2016 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 17:16:29 +00:00
peabody124
4d7e053e06 AHRS Debugign code for dumping the EKF and importing into Matlab
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2013 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 14:31:34 +00:00
peabody124
2019edd612 AHRS: Store running time to make detect resets easier. Update OP and AHRS in
parallel for this update.  Also removed comment for rawhid

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2012 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 14:31:32 +00:00
edouard
a568e27703 OP-180 Implementd a setting to disable PFD smooth updates.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2010 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-26 20:19:43 +00:00
edouard
d232461f9d OP-138 All multirotor frame types except Tricopter now supported, but... not tested yet!
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2008 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-25 21:55:04 +00:00
peabody124
c2474a4c08 Ground/rawhid: Fix mutex deadlock condition
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2007 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-24 20:56:40 +00:00
peabody124
aed2a1ee2e Ground/rawhid: Cleaned up the code related to disconnceting USB device
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2006 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-24 20:00:07 +00:00
peabody124
9944cdfcb0 Flight/RateDesired: UAVObject for monitoring the desired rate out of
stabilization for diagnostics

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2004 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-24 20:00:02 +00:00
peabody124
488ae158c8 Ground/rawhid: Add mutexs between write and read from buffersi. Fix bug that
dropped some data by reading too much from buffers at variable rates.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2002 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-24 01:35:28 +00:00
ligi
cc497c43dc check if opening a device worked / prevents segfaults ( e.g. failing BT connection ) & checking if my svn account works ;-)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2000 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-22 11:17:48 +00:00
edouard
9ad1618739 OP-138 Quad and Hexa implemented, custom table works (read only, not edit), and code improved to enable definition of matrices
in simple tables instead of ugly lines of code. Testers needed. Cautious testers. Also reshuffled the AHRS UI to put 6-point above sensor noise.
Next will be octo and coaxial frames.




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1999 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-21 22:05:07 +00:00
sambas
d6e9080ec6 Ground/rawhid: quick hack to help on usb unplug freeze, need to make proper error handling
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1998 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-21 14:11:53 +00:00
peabody124
f618e6fffc Ground/HID: A few tweaks to the HID code, especially for mac, and make sure it
never tries to transmit too much data

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1995 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-20 05:21:23 +00:00
andrew
2a47f4baca more modifications to UI for ccpm mixing.
will now read back mixer settings from the flight hardware and try to determine the swashplate config automatically.
Looks good but only basic testing performed so far.
this has not been tested for flight in it's current form.
Use at own risk! 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1994 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-20 05:04:19 +00:00
peabody124
33c5877031 Ground/rawhid: A small change to OSX serial number handling to be more
"maclike" and correct

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1988 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-18 00:50:51 +00:00
muralha
28c3dcf771 OP-150 GCS/ModelView: Create a fallback default setting on the ModelView plugin
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1987 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-18 00:08:31 +00:00
pip
253d831fc9 Added more lat/lon range checking an nan prevention.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1986 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 20:37:41 +00:00
pip
e0f399e333 Forgot to include altitude nan value prevention.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1985 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 20:24:23 +00:00
pip
e9c0b9455f Added lat/lon/alt range checking.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1984 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 20:09:54 +00:00
pip
1f3d45defd Fixed map mode UI opmap button states.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1983 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 19:21:38 +00:00
edouard
da84b1fc76 OP-138 Custom airframe table now displays the generated mixer matrix and curves. Display only, editing it won't change the mixer.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1982 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 19:15:05 +00:00
pip
ac53d71877 Forgot to disable the manual home location move ability.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1981 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 18:32:57 +00:00
sambas
8c46d22aa7 OP-169 hitl/FlightGear fixes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1980 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 17:37:51 +00:00
pip
dc943baeaa Disable manually moving the home location on the opmap (for now).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1979 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 17:34:39 +00:00
corvus
8aecc1ec0a OP-169: Hitl: IL2simulator - updating new UAVObjects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1978 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 16:55:18 +00:00
edouard
bdba5c9168 OP-138 Config gadget: display the new multirotor shapes. Mixer code is not done yet!
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1976 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 15:11:37 +00:00
pip
3f6796138e Updated UAV lat/lon/alt value requesting code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1975 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 14:36:41 +00:00
pip
658f9046d2 Added UAV Yaw/Heading code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1974 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 14:23:13 +00:00
edouard
91695b4e7d Update UI for dials plugin for up to 5 decimals for factor.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1973 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 14:20:53 +00:00
edouard
82b702e239 Added the new Multirotor shapes to the SystemSettings object, as discussed on the forums. UID has not changed, but you should recompile still (sorry).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1972 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 14:15:47 +00:00
sambas
ef83d7a8ec FlightGear homelocation set
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1971 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 14:05:01 +00:00
corvus
ff87e8bd79 IPConnection telemetry module: Rev 1342 introduced a serious deadlock bug due to incorrect usage of QReadLock where a QMutex should have been used.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1970 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-16 22:29:19 +00:00
zedamota
41388d97bd OP37/GCS MapLib - Change to try lowering processor usage.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1969 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-16 21:10:29 +00:00
corvus
c067552f74 OP-169: HiTL - il2simulator now updates attitudeRaw
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1968 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-16 20:04:46 +00:00
corvus
ebae3ffa40 OP-169: HiTL: Added AttitudeRaw UAVObject to HiTL core, updated UAVObject update timings
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1967 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-16 18:25:21 +00:00
corvus
82c533e914 OP-169 - HITL - hitl core is set up to update PositionActual, VelocityActual and HomeLocation - il2simulator.cpp is updated to set those correctly
(status: compilation OK, function yet untested)
xplane and flightgear yet need to be fixed
Note: I needed to change /libs/utils/coordinateconversions.h to have access to previously protected utility functions used to convert LLA to ECEF/RNE for HomeLocation
Code for this is "inspired by" flight/OpenPilot/Modules/GPS


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1964 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-16 14:30:36 +00:00
andrew
593c947f5e minor modifications to UI for ccpm mixing.
better integration into config gadget (now only one set of buttons)
this has not been tested with hardware in it's current form.
Still need to make UI small screen friendly.
Use at own risk! 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1963 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-16 14:05:51 +00:00
edouard
d8086d6b72 OP-138 Small updates to config widget, start of custom configuration interface, lots of work to do still...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1961 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-14 21:48:58 +00:00
edouard
f2681ef2c4 OP-138 Feed forward tuning is now working. Watch out for stray props! For safety reasons, the FF tuning will only run if all three checkboxes are checked. Otherwise, follow the tooltips (or the new wiki).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1957 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-13 21:09:53 +00:00
andrew
9aae70fedf Most functionality is now in the UI for ccpm mixing.
Currently this will not update hardware correctly... 
but it will set the matrix under the Advanced Settings tab.
Do NOT use for flight!

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1952 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-13 06:06:32 +00:00
banigreyling
2d0196a5ea OP-42 GCS/Scope: Removed some code that was required for earlier config version upgrade. This code is not required anymore.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1951 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-13 05:47:06 +00:00
edouard
c2664a7843 OP-138 Various updates to config gadget: new quad shapes in the artwork, new tooltips, and start of the feed forward testing interface, with foolproof user safety (tm) built it...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1950 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-12 21:41:06 +00:00
dankers
c2db00fb40 Update Credits, add ttf with Logo for Altium.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1947 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-12 07:34:10 +00:00
andrew
093e475dfc continued modifying UI for ccpm mixing.
NONE of this has not been tested with hardware in it's current form.
Use at own risk! 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1946 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-12 05:12:56 +00:00
edouard
1824440c8e OP-190 Added support for the flightmode switch settings in the config gadget. Let me know if you like the UI!
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1945 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-11 19:03:27 +00:00
les
6d6ec37474 Manual control: Changed 'Position' stabilization mode to 'Attitude'
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1944 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-11 17:58:11 +00:00
zedamota
1f6f5fe674 OP37/GCS MapLib - Fixes auto find google maps version.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1943 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-11 14:15:31 +00:00
andrew
f7bf258a50 Started to modify UI for ccpm mixing to integrate it into the look and feel of the config gadget.
Most of the functionality has not been implemented yet.
NONE of this has not been tested in it's current form.
Use at own risk! 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1942 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-11 05:34:52 +00:00
zedamota
d64892069a OP37/GCS MapLib - Update to new google maps versions. Fixes safe area size update with digital zooming.
TODO: fix auto find google maps version.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1941 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 23:27:03 +00:00
martin
ccdc107ad8 Redesigned dialogs.
Added chinese installer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1940 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 23:23:31 +00:00
edouard
4ec3f3fe4c OP-138 Hexacopter support in the config gadget. NOT TESTED on a real frame, do it at your own risk... and report, please!
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1939 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 13:45:10 +00:00
edouard
64fb124856 OP-138 Update fixed wing mixer computations to be compatible with the -127/127 range as per the latest UAVObject updates.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1938 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 12:56:44 +00:00
edouard
4dae7ef2df OP-138 Multirotor mixer supports adjustment of weight of Roll/Pitch/Yaw on quad + and X configurations.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1937 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 12:04:05 +00:00
edouard
706e418990 OP-138 : integration of Andrew's Heli mixer UI into the config widget. Not very well integrated, but the code is there, will improve over the next few days.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1936 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 08:02:44 +00:00
pip
d11e9c56e5 Removed center maguc waypoint to map
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1935 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 07:42:41 +00:00
pip
3a2fe4587d Fixed usleep windows compile problem
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1934 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 07:32:59 +00:00
peabody124
5f601bf5ab Flight/Guidance: Enable for any type of quad airframe
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1932 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 00:46:04 +00:00
peabody124
e72b6051b5 AHRS: Make mag variance account for the vector length of magnetic field. Also
moved around where the axis are swapped and made the negative sign come from
calibration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1931 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 00:46:01 +00:00
pip
fc0f0761a0 Added distance and bearing info of mouse or waypoint from home position.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1930 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-09 21:01:33 +00:00
pip
54af7e5753 Fixed mouse over waypoint problem - by setting their z values higher than any other graphic items on the map.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1929 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-09 18:59:19 +00:00
pip
cad8644a47 Added MoveToMagicWaypointPosition function and GUI button.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1928 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-09 13:36:21 +00:00
pip
676166f045 Added UAV trail settings onto the right-click context menu on the map.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1927 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-09 12:29:30 +00:00
pip
34dffe73de Fixed a few mouse position problems.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1926 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-09 10:23:29 +00:00
pip
c75628c018 Added public "GetFromLocalToLatLng" function to allow widget point to lat/lon coord conversion.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1925 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-09 10:09:49 +00:00
darkz
9a90a124fd Ground: Updated Hitl plugin and FlightGear to provide PositionActual.
Currently the only value that works is PositionActual.Down wich is mapped to the altitude.
PositionActual.North and PositionActual.East are hardcoded to zero.
Also defined M_PI as it said it was no defined.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1924 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-09 08:52:19 +00:00
darkz
6e34b78b85 Updated Hitl module and FlightGear to Provide VelocityActual.
Tested with FlightGear 2.0, But should not break 1.9.1, please provide feedback if anithing odd happens.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1923 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-09 00:59:14 +00:00
peabody124
4e6f100ae5 Flight: Swap to Les' code for main line
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1920 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-08 15:38:23 +00:00
peabody124
9ec694cc40 Ground/AHRSCalibration: Account for conversion in AHRS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1918 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-08 15:38:16 +00:00
pip
a081fb7ec1 Added Safe-Area options onto the right-click context menu.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1917 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-08 08:47:31 +00:00
pip
c13816db20 Fixed SetSafeArea parameter - it was BOOL but should be INT.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1916 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-08 08:43:39 +00:00
pip
cc584be136 Added magic waypoint buttons, added 'set home location' on right click menu.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1915 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-08 08:03:09 +00:00
peabody124
c4cb494a22 UAVOBjects: Just ran object genearator to get things compiling again
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1913 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-07 13:09:35 +00:00
pip
3079476bb0 OPMap gui style updates
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1912 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-07 10:24:42 +00:00
pip
1741825ee2 Added 'map modes' to the opmap plug-in. "Nomral map mode" and "Magic waypoint map mode". Not yet complete!
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1911 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-07 07:09:00 +00:00
pip
69d2e8828f Added two emit signals for when a waypoint is dragged around the map witht he mouse. Made the waypoint 'picture' object public (temp).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1910 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-07 07:06:18 +00:00
darkz
5c9b09a72d Removed the example ovjects references on ground/src/plugins/uavobjects/uavobjects.pro
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1908 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-07 03:23:45 +00:00
edouard
2426606a8b Remove example objects from GCS code and XML definitions, those are not useful anymore, the system is mature enough by now!
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1906 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 21:51:58 +00:00
edouard
f9c41caaf3 OP-137 Bargraph dials now also support multivalued fields.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1904 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 21:34:25 +00:00
martin
b4befcee76 added default settings
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1902 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 17:02:58 +00:00
edouard
5a6795b6cb OP-137 Support field with multiple element for analog dial gadget.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1901 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 15:52:46 +00:00
peabody124
ecf4e74a71 Ground/AHRSCalibration: Make mag's calibrate properly
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1900 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 14:26:44 +00:00
peabody124
dea5c91646 AHRSCalibration: Make default values correct now Les extended
uavobjectgenerator to support multiple fields (thanks Les!).  Also
changed default scale on mag to +/-6g

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1899 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 14:26:42 +00:00
peabody124
66bf9d53d4 AHRS: Paramaterize the variance used for the indoor algorithm.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1898 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 14:26:40 +00:00
kokomojoe
86338404ed OP-185 Flight/GCS update the uavobjects.pro and uavobjectsinit.cpp with the firmware IAP objects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1897 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 05:33:05 +00:00
kokomojoe
3c352f1d1d OP-185 Flight/GCS - object to get firmware version and to switch into bootloader mode
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1894 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 02:27:57 +00:00
kokomojoe
b9fabbe9ce OP-185 Flight/GCS firmware IAP object
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1893 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 02:13:33 +00:00
martin
5dae137af0 OpenPilot.wxs divided into parts
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1889 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 01:54:59 +00:00
martin
bec724a11d Added copying files to installer
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1888 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 00:07:31 +00:00
martin
0ed34d1399 added installer
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1887 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 00:05:57 +00:00
les
7ddb0f6f80 Stabilization: Changed to new switch format. Both position and rate modes work.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1886 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-05 14:51:33 +00:00
les
141f6e43fb UAVObectGenerator: Added support for multiple defaults
Arrays can now have one default for all elements:
elements="4" defaultvalue="1"
or a default for each element:
elements="4" defaultvalue="1,2,3,4"


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1883 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-05 12:40:42 +00:00
martin
39b59e7452 added block copying qt_*.qm files
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1882 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-05 03:45:28 +00:00
dankers
d971746d26 Remove IT translation, two Italian speakers in the project have stated that the GCS will be in English and that this is common for computer programs in Italy. The chances of it being used as small and finding translators is even smaller.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1881 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-05 02:03:08 +00:00
martin
6206036226 Add: copying required QT DLLs (for installer)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1880 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 20:29:36 +00:00
martin
82b6b0f699 Add: copying required QT DLLs (for installer)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1879 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 20:20:22 +00:00
peabody124
ba3ecada1d Flight/ManualControl: Implemented settings to change what the Mode switch does
so it can also change parameters of Stabilization.  Please check your aircraft
behavior with this patch, but default behavior should be unchanged.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1878 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 19:48:09 +00:00
martin
037758c0ff Add: copying required for installer QT DLLs
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1877 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 19:06:48 +00:00
muralha
a915ff5ff7 Ground/ModelView: Center 3D models in the scene.
When a new 3D model is load, it will be centered on the scene.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1875 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 11:56:50 +00:00
muralha
114956a514 Ground/ModelView: Added camera switching through keyboard (numbers: 1 to 0).
Also, fixed wrong rotation of pitch and yaw.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1874 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 10:17:59 +00:00
muralha
abba162dca OP-149 Ground/ModelView: Cartesian coordinates system + Object rotation instead of camera rotation.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1873 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 09:53:31 +00:00
andrew
10a69a3c2c Added ccpm_setup.svp to config resource file
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1872 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 04:08:29 +00:00
peabody124
ffacbdcf1f Ground/UAVObjects: Remove attitudesettings from uavobject.pro file (looks
sheepish)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1871 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 02:03:50 +00:00
peabody124
99f6500c9a Ground/UAVObjects: Forgot to delete vtolsettings. sorry.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1868 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 23:28:31 +00:00
zedamota
361f36da19 OP37/GCS MapLib - Small bug fix
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1867 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 23:11:17 +00:00
peabody124
07f8a227fa Ground/AHRSCalibration: Keep in sync with object changes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1866 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 22:08:34 +00:00
edouard
646b65564e Helicopters in the share directory. Plus the default bg.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1865 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 20:41:55 +00:00
les
05a85c8c95 New stabilization module based on PI-P algorithm used in FlightOS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1864 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 20:39:23 +00:00
edouard
11d197b3fc Added planes to the GCS distrubution dir. Renamed all texture.jpg to TEXTURE.JPG so that all platforms can see the textures (3DS files refer to TEXTURE and linux is case-sensitive)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1861 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 20:28:49 +00:00
edouard
068c6bfa93 Added multirotors to the GCS distribution directory. Fixed the 'textures.jpg' case so that the textures work on every platform.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1860 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 20:22:52 +00:00
edouard
3d8f11dc36 Remove old Easystar directory which is not used anymore in the share directory
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1859 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 19:56:00 +00:00
peabody124
a9495e2cbb UAVObjects/AttitudeSettings: Remove unused object, moving data to AHRSettings.
Added attitude bias to AHRSSettings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1855 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 18:14:34 +00:00
peabody124
754200f9cf UAVObjects/Delete old VTOLSettings object
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1854 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 18:14:27 +00:00
erhard
dd0d58f64f OP-99 GCS, Import/Export Plugin: Support for XML-File Format.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1852 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 16:13:28 +00:00
osnwt
9f34044d74 OP-175/Ground: Hopefully fixed some Modelview crashes on Windows due to VBO enabled by default in GLC_Lib.
Added debug message displaying current VBO states (enabled, supported, used) - check with mouse right-click.
Please confirm that this does not break the plugin on other systems and that VBO can be enabled and really
is used by GLC_lib on supported systems. Also changed default 3ds model path.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1850 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 10:38:35 +00:00
peabody124
aa50cf836b Ground/UAVControl: Throttle rate of messages when using GCS controller. Still
too high.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1848 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 04:34:09 +00:00
andrew
5c4331fe32 added ccpm swashplate image for config gadget.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1845 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 03:55:41 +00:00
edouard
aa18cb4ce1 New indicator for GCS: "Arm Status". Use the bargraph dial plugin and connect it to the "ManualControlCommand/Armed" object/field.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1843 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 12:47:17 +00:00
peabody124
5c9b5f4a99 AHRS: Get calibration working again
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1842 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 03:10:04 +00:00
peabody124
0c30101f54 AHRS: Made an object setting to allow the downsampling rate to be changed on the
fly (EKF rate up to a limit).  Also, now the algorithm selects if you are
indoor or outdoor as well as if you use a mag indoor (if you do set the z
variance higher than it calibrates to).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1841 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 03:10:01 +00:00
peabody124
6d39d85b8f UAVObjects/AHRSStatus: Remove unused fields
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1838 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:29 +00:00
peabody124
2050864e59 UAVObjects/VTOLStatus: Remove unused object. Also added update time to
indicate stabilization loop time.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1837 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:26 +00:00
peabody124
ea3fb03c7f Flight/AHRS Communications: Switch to Les' very nice UAVObject communication
scheme

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1835 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:18 +00:00
peabody124
3854541798 Ground/UAVObjets: Add missing files for AHRSStatus2
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1833 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 20:28:16 +00:00
peabody124
2a93f35807 UAVObjects/MixerSettings: Have values as int8, don't need float resolution
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1832 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 20:28:14 +00:00
les
b2d56ca34c AHRS: Added UAVObject based SPI communication between AHRS and OP.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1830 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 17:31:13 +00:00
edouard
8161d25774 OP-138 Yaw mixing was inverted in the config gadget! This update works for me, with the quad layout in the gadget's picture.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1827 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 16:25:21 +00:00
edouard
b80d2ae4c5 OP-138 Support Max Accel in the matrix mixer from the config gadget.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1826 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 15:49:54 +00:00
peabody124
c076a695ce UAVObjects/ActuatorSettings: Default values are all 1000 now so that an
unconfigured motor can't turn on.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1823 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 13:45:26 +00:00
peabody124
4766e11882 Ground/GCSControl: Reenable joystick. SDL required.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1822 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 13:45:24 +00:00
peabody124
93a85e24a0 Ground/Joystick/Magicwaypoint: Fix initialization condition that led to crash
when closing gadget and also center icon on click in magic waypoint.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1821 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 12:33:36 +00:00
peabody124
9f4e3906e3 Flight/Actuator: Made it use the detected dT for the feedforward computation
and removed the unused field from actuator settings (old setting time and all
the aircraft specific stuff).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1820 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 12:33:33 +00:00
peabody124
2dc40d11a1 Flight/Stabilization: Use the system clock to determine time from previous
update since now drive by events.  This means StabilizationSettings object
changing so write down your settings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1819 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 12:33:29 +00:00
edouard
b5eb89ed5e OP-138 Added Reset button for curves, and display of value when moving a curve point.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1816 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 08:40:46 +00:00
edouard
b385ce961e OP-138 Modify Mixer curve to use values from 0 to 1 instead of -1 to +1, since the actuator module in OP works in the 0-1 range. Comments welcome on this.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1815 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 07:28:12 +00:00
edouard
b32da232cb OP-138 Persistent (to SD) saves of all mixer settings working now (was missing two objects earlier).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1814 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 07:18:11 +00:00
martin
712725f3d3 Update Russian translation
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1813 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-30 23:05:04 +00:00
cranphin
9c705aedf1 GCS: Removed last 'binary' config reading support, for layout/splitter settings.
Again, use the previous version to convert old config files if needed :)


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1812 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-30 20:55:15 +00:00
cranphin
b418fe18bf GCS: Control, Tiny fix to center the big red dots :)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1811 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-30 20:14:39 +00:00
dankers
05896ec335 Update Sounds for Notify Plugin, update CREDITS.txt
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1809 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-30 12:21:54 +00:00
peabody124
c69f884f01 Ground/AHRS Calibration: Make sure it returns updateRaw to false after running
to stop from hammering telemetry and keep OP-AHRS smooth.  Also fixed bad
connection in magic waypoint.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1807 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-30 04:49:55 +00:00
peabody124
e2d63cbf19 Flight & Ground/AHRS Calibration: Made variance estimation into a two pass
approach again because ran out of numerical precision for single pass.  Also
made ground force the gyro signs to be correct.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1806 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-30 04:30:29 +00:00
peabody124
4caab584f1 Ground/AHRS Calibration: Hard code the signs of teh sensor calibrations to be
correct.  Six point calibration otherwise is sometimes inconsistent.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1805 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-30 01:20:34 +00:00
peabody124
25314ab92a Ground/UAVControl: Removed some debuggings and a qFatal in SDLGamepad for no
joystick found.  Changed gadget name to Controller to remove redundant UAV.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1804 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-30 01:20:29 +00:00
peabody124
f2d5db60da Remove debugging messages
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1803 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-30 01:20:26 +00:00
edouard
742987a314 OP-138 Small bugfix to prevent a crash when actuator settings are incoherent
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1802 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 19:40:11 +00:00
peabody124
4e3325f3ba Ground/Libs: I'm an idiot, forgot to comment out sdllibrary itself
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1797 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 16:02:20 +00:00
peabody124
ce75434017 Ground/Plugins: Disable joystick control by default because of SDL dependency.
People will need to install SDL :(.  Anyone know if we can make the joystick
aspect of this code separate and detect at build time if they have the
requirements?

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1796 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 13:15:48 +00:00
edouard
434a9499e2 OP-52 Hide Connect/Disconnect buttons in telemetry mode. Unhide in other modes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1795 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 12:12:46 +00:00
peabody124
c95b1e6117 Ground/UAVControl: Working joystick support although currently not configurable
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1794 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 03:59:03 +00:00
peabody124
7d6163c746 Ground/SDLGamepad: Import the library. This and the next commit introduce SDL
as a dependency.  Please let me know if you have any problems.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1793 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 03:58:58 +00:00
edouard
a246c0f9ad OP-138 Corrected inconsistency with Quad-X read/write.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1792 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-28 19:44:55 +00:00
edouard
bd6754cd6b OP-138 Mixer: fixed wing works, and Quad-Plus and Quad-X configurations are supported. Not tested for obvious reasons, since I am working in the train.
You can check how this works for you and report bugs. Layout works fine with screens as small as 800x600.




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1791 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-28 18:27:34 +00:00
edouard
14af2b5726 OP-138 Small improvements and work on UI. Progressing slowly...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1787 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 20:38:39 +00:00
peabody124
e1e629d6fb Ground/Joystick Control: Separated the logic for changing values from the
visualization to prepare for real joystick support.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1785 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 19:35:25 +00:00
sambas
21278e7a0e Ground/share: peabody was half sleep when making this, so here is the fix ;)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1783 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 15:47:10 +00:00
peabody124
c5863320fe Ground/AHRS Config: Made gyro bias computation happen on GCS during 6pt
calibration

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1781 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 07:48:28 +00:00
peabody124
22db0d8785 Ground/Share: Sorry, writing it more elegantly. Tired.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1780 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 07:48:26 +00:00
peabody124
bdcca823fc Ground/Share: Ok, previous patch for this messed up on windows. I'm making
Linux/Windows act like before but Linux people should check if they want the
mac version or not, I'd guess $(COPY_DIR) on mac more like osx.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1779 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 07:43:42 +00:00
peabody124
f74d64f0be Ground/Share: Remove the second $$dir to prevent copying the resource
directories into the directories on a second build.  Also checking for
resources using the configured path instead of the hardcoded one.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1775 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 07:28:23 +00:00
sambas
6eabaeba2c GCS compile problem fix, windows, QTCreator, qt 4.6.3
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1773 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 06:58:38 +00:00
sambas
9599bb384b uavobjectgenerator: user file removed
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1772 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 05:50:25 +00:00
erhard
9d5f82727f OP-99 Ground Import/Export Plugin: Add version-number to plugin configuration.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1771 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 17:34:23 +00:00
sambas
a46b46f939 Ground/hitlnew: makefiles removed from svn
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1770 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 15:02:12 +00:00
cranphin
c2fee8fc6d GCS: Right, fixed this the right way per suggestion of PeterG (Thanks :)
). Splitters now have 6 pixels of grab area on each side again, without
crashing 4.7.0.
I still is ugly code, but Qt leaves us no option :) Added some comments
to make this clear.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1769 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 09:29:23 +00:00
peabody124
a3ea9a5461 AHRS: Add a weak mag correction in indoor mode to remove gyro bias and try and
get a reliable heading

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1765 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 03:06:51 +00:00
peabody124
a91e5502b4 Ground/XPlane: Should update GPSPosition with gps position
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1764 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 03:06:47 +00:00
peabody124
6d66060730 Ground/MagicWaypoint: Now displays the current position and desired position (icons could do with work)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1763 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 03:06:45 +00:00
peabody124
6fe9a12358 Ground/OPMap & Coordinate conversions: Keep units in cm throughout
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1762 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 03:06:41 +00:00
peabody124
ba0fb92853 Ground/MagicWaypoint: New gadget that controls position desired in a magic waypoint fashion.
Ground/PFD: Update to use velocity actual

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1761 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 03:06:37 +00:00
peabody124
77b68e5169 Flight/Guidance: Initial template for guidance module
Flight: Create PositionDesired (the active waypoint) UAVObject and make the FlightSituationActual no update since it not used.
Flight: New velocity desired object that passes information between the look computing the desired velocity and the PID loop to get it (updated at different rates)
UAVObjects/PositionActual: Remove unused GPS fields
UAVObjects/PositionActual VelocityActual: Split the velocity into a separate object.  ALso make sure all the information telemetered around is in cm to avoid using floats.
UAVObject/GuidanceSettings: New guidance settings object for the guidance module
Flight/Posix: Add the new objects to the Posix sim
Flight/Guidance: Computes a desired velocity based on position error than runs a PID loop to control roll and pitch to achieve that velocity.  All distances are in cm, and updated the PositionActual fields to reflect this and use int32.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1760 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 03:06:27 +00:00
cranphin
cb9fdc8df6 GCS: Trying to tidy up splitter code some :)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1756 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 21:14:16 +00:00
peabody124
a01783b2a8 OP-140 AHRS: Explicilty deal with if it is initialized or not, use that to
determine retransmitting calibration, home location and such.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1755 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 21:05:38 +00:00
zedamota
4536bc38db OP37/GCS MapLib - File committed by mistake, reverting changes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1754 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 19:35:05 +00:00
zedamota
06e07fef2f OP37/GCS MapLib - Should stop black tiles on digital zooming
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1753 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 19:31:09 +00:00
cranphin
467bb42b02 GCS: 'This file isn't big enough for the two of us!' Moved SplitterOrView to it's own files, makes stuff easier to figure out :)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1752 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 18:56:57 +00:00
pip
9bf6bbcbeb Removed manual set home position, fixed go home functions.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1751 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 18:15:44 +00:00
dankers
4787a6f5cd Update the translations, rename Chinese translation.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1750 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 18:07:33 +00:00
cranphin
c9af2b23d0 GCS: This should fix crashing with splitters in Qt 4.7.0 :)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1749 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 16:42:24 +00:00
zedamota
e2dde2c097 OP37/GCS MapLib - Increased google true zoom to 21. It seems it was increased on one of the latest google maps versions. Thanks Peabody and Pip for the heads up.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1748 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 16:13:06 +00:00
cranphin
a64981ae4c GCS: Fix on the fix, I messed up so gadget layouts wouldn't load at all, ever :)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1747 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 16:09:34 +00:00
cranphin
da113799ad GCS: Tiny cleanup, remove a member variable which wasn't really used.
Makes stuff easier to understand :)


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1744 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 14:32:16 +00:00
cranphin
8fd00b9466 GCS: Small bugfix, with no ini file, the initial workspaces got their
'empty gadget/widget' removed.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1743 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 14:24:52 +00:00
pip
1f482371ca Fixed (hopefully) opmap plug-in zooming,
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1742 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 11:51:31 +00:00
peabody124
9b28f2d72c OP-167 OP-157 AHRS/Calibration: Added mag scale and really cleaned up calibration.
Calibration should take less time now too (using second moments to estimate
variance in one pass).  Now need to change to multiple messages to get the
calibration in to keep the request message size minimal.  Also currently
running sensor calibrate doesn't store the gyro bias so if you want to use this
you'll have to tweak it manually.  I'll fix that step tomorrow.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1741 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 09:20:38 +00:00
edouard
fd370f571d OP-138 Initial Quadcopter mixer UI, to be refined. Quad shapes artwork.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1740 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-24 23:02:32 +00:00
edouard
ef222a8739 OP-138 Mixer interface: implemented Elevon fixed wing. Not flown either.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1739 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-24 22:16:20 +00:00
edouard
918770f4a2 OP-138 Standard Fixed wing mixer implemented. I have not flown with it yet, take your responsibilities :)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1738 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-24 21:24:42 +00:00
edouard
eedf85a5ac OP-138 Start of the new Mixer configuration interface, for fixed wing only. This does not work yet, takes a long time to fully implement.
The system settings UAVObject is updated, you will have to recompile your firmware. If you want to take a look and let me know, please do!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1737 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-24 20:39:37 +00:00
zedamota
fa4818542e OP37/GCS MapLib - Fixed drag with digital zooming, enhanced graphics quality
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1735 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-24 19:28:40 +00:00
dankers
d9b890791c Basic Chinese translation for the GCS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1734 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-24 18:17:34 +00:00
edouard
fde1615fed OP-138 Preliminary work on the mixer settings (in the config/airframe tab).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1732 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-24 06:22:53 +00:00
peabody124
7a49f13540 Ground/OPMap: Fix compile error that PT made:
http://img93.imageshack.us/img93/8520/angrymonkey3uv.gif
Also I'm not sure ZoomReal is correct, this just gets things running.  There
are some quirks with the OPMap scroll bar now that need to be addressed.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1731 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-23 23:23:47 +00:00
cranphin
1758f55f1c GCS GPS Display: Noticed redrawing got real slow if I left the GPS
Display running for a while. I'm blaming that on the text area filling
with a million lines, though that still needs to be confirmed.
So I added a arbritrary 200 line limit, after which lines at the top
start disapearing. Seems sensible anyways :)


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1730 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-23 22:19:40 +00:00
corvus
1472b342c1 1.0 Featur Freeze -
Removing some Experimental and Incomplete Modules and their UAVObjects not suited for 1.0
- they will be moved into an experimental branch:

Navigation     : experimental code only
FlightSituation: experimental code only 
Guidance       : preliminary draft - possibly to be replaced by peabody124 position hold code if finished in time.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1729 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-23 22:05:03 +00:00
cranphin
e5c8c2129f GCS GPSDisplay: Add SNR bars, fix sattelite indexes from nmea parser.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1728 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-23 21:35:08 +00:00
zedamota
aec96a3867 OP37/GCS MapLib - Upgraded to new google versions.
Zoom now as no limit.
Other changes:
OPMapWidget:
SetZoom(double) accepts any value. Ex:19.4
double ZoomReal() returns the true zoom.
double ZoomDigi() returns the current digital zoom.
double ZoomTotal() returns digital+true zoom.
SIGNAL:
void zoomChanged(double ZoomTotal,double ZoomReal,double ZoomDigi);

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1727 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-23 21:13:18 +00:00
edouard
7598973824 Removed useless debug output from the dials plugins, to make GCS less verbose.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1726 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-23 20:17:17 +00:00
corvus
7125378cae OP-169 - Fill in new NED vector values from flight simulator
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1725 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-23 19:48:08 +00:00
nickolay
53c630c7eb [HITL] : - add X-Plane bridge;
- appropriate and needed changes in HITL core files;

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1724 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-23 15:16:45 +00:00
cranphin
e217f8fc31 GCS: Whoops! I broke saving layout for empty workspaces. This should fix
it, Sorry! :)


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1723 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-22 22:28:52 +00:00
corvus
e44045f422 OP-165 : Guidance Module
Creating GuidanceModule together with PositionDesired UAVObject (as discussed),
so dschin and me can work on it :-)
Will compile and (on sim_posix) execute, but PID logic is yet untested and preliminary.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1722 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-22 22:16:48 +00:00
cranphin
d9dc37ad33 GCS GpsDisplay: Display PRN numbers in constellation, and some cleanup.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1721 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-22 21:36:11 +00:00
cranphin
e4d317f40e GCS: Drop read support for binary plugin configuration. If you haven't converted your old ini yet, load it up once in a revision built from source before this change.
See also: http://forums.openpilot.org/topic/1850-existing-configuration-files-read-this-if-you-have-them/

Note: Reading binary layout (which gadgets are shown in each workspace and how they are split) still is available, since that was a later change. That'll get done somewhere in the future :)


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1720 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-22 19:57:02 +00:00
pip
c734584b01 Tidied up the zoom code in the map widget plug-in.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1719 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-22 08:42:38 +00:00
edouard
3dec1b4105 Added Compass dial to GCS share directory as it is working fine. Reminder: "artwork" is for work in progress and the developer repository for artwork in general.
the share/openpilotgcs/dials contains the dials artwork which are installed with the GCS.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1718 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-22 08:38:24 +00:00
peabody124
3c647f3481 Ground/UAVTalk: Export UAVTalk object so logging compiles on windows (and reenable). Cross platform my ass.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1717 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-22 06:11:34 +00:00
peabody124
5cd8791f7a Ground/Logging: Disabling this plugin by default until we get it building on windows
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1716 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-22 05:28:20 +00:00
peabody124
5771769acf Ground/Logging: Change replay state at end of replay file to stop lock up
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1715 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-22 01:04:24 +00:00
peabody124
674ee88f6d More Q_UNUSED
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1714 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 22:53:08 +00:00
peabody124
b376350bc2 Ground/UAVTalk: Add destructor and make sure it's called in Logging when stopping logging to disconnect the signals.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1713 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 22:52:49 +00:00
peabody124
2a9fd99b06 Ground/Logging: Support for pausing and resuming playback and time rescaling plus an (ugly) toolbar to control it.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1712 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 21:43:23 +00:00
peabody124
d30c6830e7 Ground: more Q_UNUSED
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1711 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 20:17:55 +00:00
les
ef7ee86d45 Mixer: zero throttle shuts off motors and changed MixernMatrix to MixernVector
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1710 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 19:31:17 +00:00
peabody124
b6bffaeb27 Ground: Cosmetic change
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1709 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 19:29:45 +00:00
peabody124
af6b6d91a3 Ground: Suppressing some more random unused variable warnings
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1708 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 19:29:43 +00:00
peabody124
df0ed37d29 Ground/Logging: Supports replay. Still needs a sexy widget to allow seeking (although seeking will be difficult since technically it depends on the entire state but we can probably ignore that). Also I think the interface for replay shoudln't be through a menu item but should be like any other connection. The way I implemented it (custom QIODevice that buffers the logfile and reads the timestamps) makes this pretty easy to do. I'm just not familiar enough with the connection manager to do this. This means currently if you're connected to device and start a replay you get updates from two places.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1705 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 19:28:01 +00:00
peabody124
a56e757003 Ground: Supress a few warnings. A drop in a bucket...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1704 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 16:37:59 +00:00
peabody124
7a8424e98e Ground/UAVObjectField: Explicitly handle case of bad enum values to avoid crashes. Still shouldn't occur.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1703 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 16:36:04 +00:00
peabody124
f96654ace1 Adding mixerstatus/mixersetting uavobject files that were missed
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1701 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 07:08:51 +00:00
peabody124
5c9701753b OP-24 Ground/Logging: Made logging module use QIODevice passed to UAVTalk which inserts timestamps and object sizes. Should be trivial to implement read functionality. Need to confirm that QIODevice writes the data in the correct size though so timestamps are in the write place for sure.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1700 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 07:07:39 +00:00
cranphin
0634f8ec53 This should fix the problem with splitter positions not being stored when the workspace their on isn't viewed before closing GCS, as Edouard found out.
The source of this problem is that QSplitter.sizes() only returns the sizes set by setSizes() after the QSplitter is actually shown. Even though save/restoreState manages to retrieve them in the same situation. I think it's a bug, not sure if I can be motivated enough to report it though :)


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1699 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-20 20:11:16 +00:00
les
875437f483 Added matrix based actuator mixing. Note the makefile is set to use the original actuator code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1698 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-20 19:27:08 +00:00
zedamota
7a69feea8c OP-21/Flight PC app - Minor change.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1694 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-19 20:53:00 +00:00
cranphin
318a60e05e GCS UAVGadgetManager: Minor bugfix, wasn't always deleting oldstyle
subgroups, which would cause them to be loaded.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1693 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-19 19:16:01 +00:00
zedamota
5c848d4944 OP-21/Flight PC app - Created AbortOperation function.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1692 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-19 18:34:20 +00:00
cranphin
400f832b3c GCS: Import/Export The checkboxes didn't work, fixed :)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1690 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-19 12:39:04 +00:00
cranphin
0441b8b786 GCS FlightGear sim: This is how it's done in the manual, and seems to
work well for me :)


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1689 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-19 12:37:41 +00:00
cranphin
e59a58aa0e GCS: Remove support in [UAVGadgetManager] for Settings/DefaultSettings.
Wasn't really used since it wasn't properly finished (no support in UI).
The idea of having ways to support defaults is good, but can probably be
done better in a different way. (I like the idea of a embedded second
ini file, which serves as 'default'. But many ways are possible).

AS usual, write support removed, read support still there for now.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1688 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-19 12:35:48 +00:00
edouard
33494ffc7c OP-160 Curve widget: 1st working version. Use "initCurve" with a list of double to create a curve, and connect to the curveUpdated signal to
read it (or call getCurve manuall).


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1687 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-19 08:49:48 +00:00
osnwt
88de8f789a Ground/OPMap config page: fixed vertical stretch of Default longitude textbox.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1686 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-19 08:40:57 +00:00
edouard
be7ff70491 OP-160 Small progress on the widget, points move vertically only now. Next commit will be fully functional.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1685 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-19 05:47:18 +00:00
zedamota
40c9c208cf OP-21/Flight PC app - Update to work with embedded changes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1684 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-18 23:39:37 +00:00
martin
900c19a2ee Update Russian translation
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1680 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-18 08:22:33 +00:00
zedamota
569e7a94e7 OP-21/Flight PC app - Added send delay.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1679 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-18 00:47:45 +00:00
edouard
35c36da060 OP-160 Rough draft of mixer curve widget, for comments. I will make it look nicer later, this is just for seeing what can be done.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1677 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-17 20:49:24 +00:00
edouard
b435053e66 High-Contrast dials for the share directory (text converted to path for being independent from SVG renderer capabilities and
installed fonts)




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1672 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-17 09:01:27 +00:00
cranphin
b1b4b15ef4 GCS: Also zero the structures in the il2 sim.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1668 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 22:35:36 +00:00
cranphin
3d43f1cff1 GCS: Zero data structures, since this is not Java ;)
I was getting some weird initial random values from the sim.
This fixes that.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1667 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 22:32:49 +00:00
cranphin
303d2c19e1 Pass the correct port numbers to the simulator.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1666 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 21:54:25 +00:00
cranphin
96990b5f60 GCS: Make [UAVGadgetManager] also human readable.
Makes the ini file a bit more verbose, but debuggable/hackable :) (Not to mention more robust).

Again, I left in support for loading the binary version, so this shouldn't mess up people's configurations. Keep a backup handy anyways :)

In the future, that needs to be removed though.

Anyone with a 'old style' configuration may notice the binary versions are left in the ini file, I can't easily delete them without deleting the new groups also, but they won't cause any problems, and aren't read. Feel free to delete them for a clean ini file :)

I left in the 'DefaultSettings' stuff, but I think it can be removed too ( or whatever it was meant to support should be added :) ).


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1664 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 19:52:12 +00:00
edouard
4888b34ac8 This time, the OPMap config dialog should have a consistent look on all platforms. Or??
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1662 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 17:24:35 +00:00
edouard
9a31fea559 OP-153 Implemented a default storage path: "OpenPilot" in the user's home directory. OPMap will use this as its default path for its mapscache.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1661 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 17:17:42 +00:00
peabody124
3b015b41c5 Flight: Got a much nicer arming/disarming system going. Made it a separate flag in the end to allow testing the stabilization code with motors not running. Also changes maxRoll/maxPitch/maxYaw to uint8 to keep object size smaller - no reason for float precision for this.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1660 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 15:41:11 +00:00
peabody124
a6e71177e4 AHRS: Yaw stabilization now supports rate stabilization or heading hold. Also need to cleanly support rate stabilization on all the other axis. Les suggested this be in manual mode which will require changing the logic somewhat (essentially for vtol it will always be running through the Stabilization module) in an aircraft dependent manner. An alternative would be a stabilization flag indicating to do full attitude hold, attitude + yaw stabilization, or all axis gyro stabilization. This would be my preference.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1659 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 15:41:08 +00:00
peabody124
64018c88c1 OP-144 Ground: Removing assert on getObject when it returns null because this seems to happen whenever uavtalk gets a bad message.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1658 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 06:20:49 +00:00
peabody124
89ba1b59fa OP-144 Ground/UAVObjects: Add assert(0) when returning null in getField/getObject as there is no reason to try and get a non-existing field. Hopefully this will help us more explictly catch any bugs from this. No objects in IRC or http://forums.openpilot.org/topic/1648-uavobjectgetfield-setvalue-behaviors-etc/ but feel free to revert if I'm missing something.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1656 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 05:43:48 +00:00
peabody124
dd0668c164 Ground/Logging: Finally add object ID and instance ID to information logged so it _might_ be readable. Still want to move size into the UAVTalk protocol and use that for logging.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1653 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 05:07:30 +00:00
peabody124
885c966e53 AHRS: Added a tracker for number of ADC updates the EKF misses. Also updated the Telemetry autogenerated files to accomodate the 11500 baud rate.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1652 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 02:59:00 +00:00
peabody124
19e80da928 AHRS: Update UAVObject with information about AHRS rate
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1650 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 01:54:21 +00:00
edouard
04fea701d4 Make OPMap options page a bit nicer with resize and consistent with behaviour of other config dialogs.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1649 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 19:51:34 +00:00
zedamota
63805b8f3b OP-21/Flight PC app - CRC use
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1648 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 18:07:25 +00:00
pip
c8ac6eb712 Added 115200 option to telemetry speed
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1636 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 16:50:31 +00:00
pip
9c94db6dd7 Added 115200 baud option to the UAVTalk telemetry.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1633 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:47:38 +00:00
edouard
d280204dd8 OP-151 Also update OPMap widget to use PathChooser, and make it use the path translation utilities. Not relevant on every platform, since typically on a Unix, the share path will not be user writeable. Still, doesn't hurt.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1619 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-14 20:27:39 +00:00
edouard
1cbd44f564 OP-151 Use PathChooser in all plugins, and update pathutils to behave consistently across platforms by always using "/" as its internal format. Should solve the issues we have been having with windows paths not being removed properly.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1618 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-14 16:58:40 +00:00
peabody124
1051d894b9 AHRS: Merged in some new code from Dschin that expliclity writes the prediction terms in the covariance matrix. Also made changes to compile with -Os. Now runs around 125 - 150 Hz depending on corrections used (this will become adjustable from GCS shortly).
Squashed commit of the following:

commit 897e3365ab6c762584c34238efd12dc144e72af0
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 22:15:21 2010 -0500

    AHRS: Getting it running nice and quickly.

commit 53d72fb849164730c89873cab81c9e09be0b112b
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 15:57:46 2010 -0500

    AHRS: Make more variables volatile for -Os.

commit 4fa90821b5d3d8c2ea5e67756313a8a63c0eeb8c
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 15:11:31 2010 -0500

    AHRS/Makefile: -O0 not added to allow me to try various space flags that don't break code.

commit 5bd17a304dc28dc271c2f3e8c6cb8ad4a830404f
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 14:44:05 2010 -0500

    AHRS: Make debuggign USART easy to disable

commit 5453f2a7939492769fe9e9cc822e69c107320670
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 14:38:37 2010 -0500

    AHRS: Explicitly expand covariance prediction.  Brings computations from 160 to 90.  Makes it not fit in AHRS though.

commit b6712da7eece2a464a2073d24b77be22bfa47094
Author: James Cotton <peabody124@gmail.com>
Date:   Sun Sep 12 22:59:42 2010 -0500

    AHRS: Make it easy to comment out the I2C/Magnetometers.

commit 8c84d0091f3d6f6bedc7a0224a4ed9cb099b022b
Author: James Cotton <peabody124@gmail.com>
Date:   Thu Sep 9 00:49:50 2010 -0500

    AHRS: Small change to INSGPS analysis tools

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1613 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-14 06:42:56 +00:00
sambas
41a23a8eeb Ground/GCSControl: weird problem with assert in windows environment, this hack seems to help it
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1608 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-13 15:12:58 +00:00
martin
ba18af6ed9 Update Russian translation
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1606 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-13 00:54:02 +00:00
martin
f03958b4a6 rollback to the previous path to *.qm files
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1605 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-13 00:08:40 +00:00
peabody124
10cfeeb35f AHRS/Matlab: Small bug in the quaternion transformation in case anyone else uses this :)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1602 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 21:22:44 +00:00
erhard
be1dc09c29 OP-99 Import/Export: Reflect the format-changes from 1599 in the version-number.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1600 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 21:05:35 +00:00
cranphin
f826ee0a20 Use QSettings key/properties instead of byte arrays for plugin configurations.
I've left in the reading of the byte arrays for now, so people can load their old config files, on the next save they'll be converted. This should be removed at some point in the not too far future though, since it's a lot of duplicate code in each plugin.

I've converted all the plugins, it's certainly possible I made a typo somewhere, I tried to test as much as I could, sorry if I broke something though :)


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1599 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 16:24:54 +00:00
erhard
ddf6ee46ee OP-99 Import/Export: Prepare for version compatibility.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1598 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 15:51:14 +00:00
peabody124
e90e714c2b Flight: Tweaked the throttle handling and VTOL use of it to make sure engines can be shut off easily in stabilization mode.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1593 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:49 +00:00
peabody124
56131476ef AHRS: Switch to sampling at 2khz, plenty of CPU usage. However need to make EKF rate different for outdoor mode with this patch because otherwise will drop samples :-(
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1592 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:47 +00:00
peabody124
5d1ebf76ea Flight/VTOLmixer: Fix bug in mixer that messed up roll mixing. Also changed minimum to -1 so that neutral can be position motors come on and -1 the off position. Also made failsafe throttle value -1 to be consistent.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1591 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:44 +00:00
peabody124
c376711405 Flight/Stabilization: Make the derivative account for the sampling time (dAngle/dt) for the PID loop since integral does and also make the integral bounds uavobject settings. It was originally bounded by constant/Ki but I'm not sure why as you change the gain of the error integral you also want to decrease the maximum error it can cause.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1590 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:41 +00:00
peabody124
8999355327 Flight: Made actuator a periodic task. I don't think the queue is low enough latency - should figure out how to make this happen as callback is the right way to go.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1589 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:38 +00:00
peabody124
dceb20b16d Flight: VTOLStatus object that returns the thrusts on all the engines
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1588 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:34 +00:00
peabody124
bba3b0c64a Flight: VTOLSetings object to contain the mixer settings for VTOL crafts
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1587 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:30 +00:00
edouard
929f7dd5d8 Make Notification plugin sound path portable too.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1579 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-11 21:17:44 +00:00
edouard
ce53757baa Servo input config was missing the accessory inputs. Changed the plugin to remove any hardcoded value, so it should be safe for future new channel assignement types
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1578 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-11 09:05:42 +00:00
edouard
3d388d2e93 Modelview: another ugly fix to complte the first one. There is a lingering issue of initing the GL context on the first valid
model that is loaded, this fix addresses it but it could be much more elegant, I'm sure.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1576 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-10 15:25:05 +00:00
edouard
4d399d7034 Fix for Mac build, sorry
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1575 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-09 22:01:45 +00:00
edouard
beed9c8936 Solved (please confirm) modelview crashing on non-existing files
Made configuration portable for: dials, bargraph dials, pfd, modelview and system heatlh
THis means: if your config points to resources in the share directory, then the config will be portable


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1574 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-09 21:18:43 +00:00