rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-04 12:24:11 +01:00
Code Issues Releases Activity
2,310 Commits 5 Branches 8 Tags 266 MiB
b851c11f53
Commit Graph

275 Commits

Author SHA1 Message Date
peabody124
0b8756d55c OP-148 AHRS/Comms: For now don't retransmit calibration after comms glitch as this re-zeros gyro bias and makes attitude stutter. Need to explicitly communicate when comms glitches and query if AHRS actually rebooted. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1654 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 05:26:12 +00:00
peabody124
885c966e53 AHRS: Added a tracker for number of ADC updates the EKF misses. Also updated the Telemetry autogenerated files to accomodate the 11500 baud rate. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1652 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 02:59:00 +00:00
peabody124
19e80da928 AHRS: Update UAVObject with information about AHRS rate 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1650 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 01:54:21 +00:00
pip
22b9b2512e Added a 115200 baud telemetry option to the OP main board/UAVTalk. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1632 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:43:42 +00:00
stac
ac6989fbeb bmp085: fix configuration of EOC interrupt 
The EOC EXTI interrupt configuration was incorrectly
pointing at GPIOG pin 8 rather than GPIOC pin 15.
This was preventing the EOC interrupt from working
properly.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1626 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:20:59 +00:00
peabody124
47a7b8548b Flight: Safety feature for VTOL. Don't enable motor until throttle brought above .5 then below or to zero. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1604 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 22:18:21 +00:00
peabody124
e90e714c2b Flight: Tweaked the throttle handling and VTOL use of it to make sure engines can be shut off easily in stabilization mode. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1593 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:49 +00:00
peabody124
5d1ebf76ea Flight/VTOLmixer: Fix bug in mixer that messed up roll mixing. Also changed minimum to -1 so that neutral can be position motors come on and -1 the off position. Also made failsafe throttle value -1 to be consistent. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1591 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:44 +00:00
peabody124
c376711405 Flight/Stabilization: Make the derivative account for the sampling time (dAngle/dt) for the PID loop since integral does and also make the integral bounds uavobject settings. It was originally bounded by constant/Ki but I'm not sure why as you change the gain of the error integral you also want to decrease the maximum error it can cause. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1590 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:41 +00:00
peabody124
8999355327 Flight: Made actuator a periodic task. I don't think the queue is low enough latency - should figure out how to make this happen as callback is the right way to go. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1589 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:38 +00:00
peabody124
dceb20b16d Flight: VTOLStatus object that returns the thrusts on all the engines 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1588 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:34 +00:00
peabody124
bba3b0c64a Flight: VTOLSetings object to contain the mixer settings for VTOL crafts 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1587 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:30 +00:00
stac
93ef510946 ahrscomms: use relative delays to avoid slipping 
Change from using vTaskDelay to using vTaskDelayUntil to
ensure that we're trying to stay periodic rather than
just waiting a fixed amount of time after each loop of
processing.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1580 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-11 23:06:22 +00:00
peabody124
e260077247 Flight/ManualControl: Making failsafe test (which must explicitly look at receiver inputs instead of throttle values in case of reversal) also consider readonly flag to detect GCS control. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1545 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-06 02:58:41 +00:00
peabody124
61854ac6ab Flight: Support for quadcoptors. The format of this control will change to support octo's and more flexible tuning. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1544 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-06 02:58:39 +00:00
stac
95595664c3 telemetry: fix comments around #ifdef 
No functional changes.

The closing comment on some of the USB_HID related
ifdefs was outdated.  Fixed.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1541 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-05 23:10:34 +00:00
peabody124
d3b677298c Flight/ManualControl: Added a hysteresis loop to the manual control connection/disconnection status. I seem to get glitching without it - probably because of the receiver catching noise. It still occasionally glitches but I don't want to make it longer. Probably should be an adjustable setting. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1527 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 17:08:04 +00:00
peabody124
c21d058110 Flight: Added ability to use a third accessory input. Currently using that to select tuning roll/pitch bias and PID tuning. I also _STRONGLY_ recommend if you enable these accessory channels (and thus these features) you make the saved meta data for the StabilizationSettings and AttitudeSettings read-only, so only on flights where you mean to can you change these settings. I'm also not convinced about the interface - it seems like flicking TX switches to get into adjustments is a recipe for disaster. Probably need to just control through GCS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1526 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 17:08:02 +00:00
peabody124
45e8131a30 Flight: Added ability to use additional TX inputs to tune attitude bias. Note this form of the calibration is temporary and will likely be replaced by a rotation matrix to deal with more general rotations. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1525 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 17:07:59 +00:00
peabody124
8dbc382e5b Ground/CoordinateConversions: Shows correct location now. I just typed in a 3.14 constants and forgot to change to M_PI. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1520 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 05:58:43 +00:00
peabody124
b4ff14b725 Ground/GCSControl: Swapped sign conventions of sticks to match the sign convention of roll/pitch/yaw. I.e. now right on the roll causes a + roll, pulling down on the pitch causes + pitch. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1518 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 02:19:06 +00:00
peabody124
a406034ed9 OP-132 Flight/AHRS: Changed the heuristics regarding GPS quality and INSGPS updates. Now if satellites < 7 or PDOP > 3.5 it does not perform GPS updates. Professor is working on some code to fix parts of the covariance matrix. If indoor updates high a 0 position and velocity and high variance. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1515 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 02:19:00 +00:00
peabody124
d3bb821e82 Flight/ManualControl: Change to ManualControl module to make warning only kick in if input is less than the max and min for throttle. Disable going to (unimplemented) auto mode. Commiting based on one yay and no nay. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1505 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-02 16:33:02 +00:00
peabody124
12657440c3 OP-132 AHRS: Added an indoor flight mode and also add an ad-hoc quality heuristic to the GPS signal to increase the measurement variance from GPS when fix quality is poor or when in indoor flight mode. In addition corrected the indentation to conform to the tab/space convention forum discussion. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1474 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-31 02:11:09 +00:00
andrew
65dc5e9b04 Yaw stabilisation for the simple algorithm was calculating the error and not taking into account that 350º error is the same as -10º error. 
The resultant error could range from -360º -> +360º
Since this is only used for Helicopters / multi rotors, and the aircraft can rotate in any direction, I added the modulo logic so that it is now from -180º -> +180º this should now take quickest path to correct the error.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1464 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-30 01:20:43 +00:00
andrew
3c6d9d6976 manual control was mapping tx input as -180º -> 180º for AttitudeDesired.Yaw. 
The Wiki (http://wiki.openpilot.org/Unit_Standards) states this should be 0 - 360º
Made the code match the wiki.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1463 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-30 01:16:00 +00:00
peabody124
f202884ce8 AHRS: Numerous changes. Added CPU load monitoring for AHRS as well as some friendly debugging output options. Also added a new CalibrationMode setting to AHRS (Echo) to speed up sensor calibration. Cleaned up the 6 point calibration interface to make it more friendly, but I think Edouard will clobber it with something nice and sexy :). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1455 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-29 06:38:30 +00:00
stac
ecac1fb79d nmea: parse GSV sentences and populate GPSSatellites object 
This creates a new UAVObject called GPSSatellites to hold
information about which satellites the GPS receiver can see
and the quality of their signals.

NMEA GSV sentences are now parsed.  The full set of GSV data
may be split across multiple GSV sentences, each containing
info for at most 4 satellites.  Once an entire set of GSV
records has been collected, the GPSSatellites UAVObject is
updated.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1453 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-29 01:46:14 +00:00
stac
2ead641136 nmea: minor bug fixes and robustness improvements 
Remove asserts on bad data, only assert on coding errors.
Remove unnecessary inline qualifier to reduce code size.
Handle more lat/lon precisions in conversion to fixed-point.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1452 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-29 01:46:11 +00:00
andrew
3530428982 Fixed the bounding of servo outputs for the case when max < min 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1444 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-28 05:11:19 +00:00
peabody124
5f9289f0c0 Flight: Keep getting WMM memory usage down 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1438 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-27 21:05:38 +00:00
peabody124
16361dea12 AHRS: Making AHRS populate the NED/Vel fields of PositionActual. May rename object to PositionVelocityActual. Also created a GPSTime object which is populated from the GPRMC command. Also added a GPZDA parsing command, but by default OP GPS doesn't send this command. Made the computation of the world magnetic model use the current time to set the magnetic vector. Note: currently if you set your home location and save it to SD, this will not recompute the vector over time. I'm not sure how sensitive this is. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1435 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-27 19:59:25 +00:00
stac
24a4c6b791 gps: Update GPSPosition instead of PositionActual 
GPS module now updates GPSPosition UAVObject
rather than the PositionActual object.  The
GPSPosition object is intended to be consumed
only by the AHRS.  The AHRS will use this (and
other inputs) to compute a filtered version of
the position in the PositionActual object.

This commit will cause temporary breakage of the
GPS functionality in the GCS until the PositionActual
object is properly updated by the AHRS.  Most of the
GCS should continue to use PositionActual.  The only
exception to this might be any tool for specifically
visualizing the raw GPS state.

GPS.c is now only responsible for receiving a
complete NMEA sentence from the COM interface.

NMEA parsing is now factored out into NMEA.[ch]
which is where GPSPosition is now updated based
on the complete NMEA sentences obtained from the
GPS.

Latitude and Longitude are now encoded in a
fixed-point notation in units of degrees x 10^-7
to prevent truncation of precision due to encoding
into a float.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1431 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-27 02:15:00 +00:00
stac
47df1faa8d ahrs: whitespace adjustments 
No functional changes.  Whitespace/tab fixups only.
Use TRUE/FALSE instead of 1/0.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1430 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-27 02:14:58 +00:00
peabody124
a0b21bef45 Flight: Got read only check working for UAVObjects and modified the ManualControl Module to use it. Edouard - please check over this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1427 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-27 00:15:48 +00:00
andrew
2361af19fb First attempt at ccpm mixing for single rotor helicopter. 
This has throttle and pitch curves implemented and can be configured for many swashplate configurations.

This has flown a 450 clone (with training wheels) and the ccpm worked well.

Still need to neaten up some stuff and work out how to implement yaw stabilisation in manual mode.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1412 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-26 06:00:57 +00:00
peabody124
4ca10e92c7 OP-121 OP-122 Flight: Improved USB HID communication. 
1. Added reenumeration function and call it on USB init (device will appear after reprogramming now)
  2. Moved buffer.c to general flight/Libraries location
  3. Removed the 62 byte transmission limitation by adding a transmission buffer
  4. Sped up USB communication by increasing endpoint polling frequency

Note, that the nonblocking and blocking USB send functions are not blocking entirely correcting.  The blocking calls the nonblocking, and the nonblocking blocks until the last chunk has started tranmission if it's a big transmission.  The buffering I added would generalize to non-blocking nicely, but would require using the EP1(IN) callback to handle most of the tranmission.  This creates a lot of issues if one function is pushing data onto the buffer and the interrupt is sending.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1403 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-25 05:32:52 +00:00
peabody124
2db294caf7 OP-125 Flight: Changed GPS stack size to a bit closer to what the internal model needs to get rid of out of memory warning, but it could still use 1k less if it pulled all the constants from flash when needed and computed the time difference when called. Also changed ManualControl so it checks the active control values to determine the warning, so if GCS is controlling the warning light goes out. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1387 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 06:03:19 +00:00
peabody124
e94d3d3846 AHRS/Flight: Allow selecting simple algorithm as well as INSGPS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1384 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 03:51:08 +00:00
peabody124
bd8fffe4d0 AHRS/Flight: Renamed AttitudeSettings to AhrsSettings to make it more intuitive. Added the ability to change the algorithm from GCS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1383 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 03:39:13 +00:00
peabody124
b32184d1ec OP-119 Flight: Converted HomeLocation object to use cm for the home base instead of floating point. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1382 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 02:49:53 +00:00
peabody124
2596f43511 OP-120 AHRS: Moved conversion of quaternion to RPY over from AHRS to OP to minimize transfer and computational load on AHRS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1381 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 02:35:39 +00:00
peabody124
0d11493337 Flight: Added mixer settings for elevon. Also added bound checking on servo outputs which becomes important when multiple things are mixed and you want to use the full range. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1380 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 01:54:58 +00:00
cwabbott
19f6db79be Added ManualControl to the win32 and posix makefiles. Also fixed a compiler error about "No newline at end of file." 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1379 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 00:52:56 +00:00
peabody124
2e705e6836 OP-116 AHRS: Made data going to the AHRS in NED format. Once the final estimate object is created I'll repeat the same calculation to populate it, although we want to avoid going back to LLA format on the OP because the CPU requirements are excessive. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1376 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 19:01:36 +00:00
peabody124
0862d64b8c OP-118 AHRS: Made default calibration values friendly for people. Also fixed bug that would repeatedly trigger calibration when it was requested. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1371 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 16:43:00 +00:00
peabody124
5662d85c4e OP-120 AHRS: Tightened up the communication protocol so it runs more quickly. Looks ok in gdb but GCS not crashing right now (rendering error) so I can't test it properly. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1366 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 00:21:54 +00:00
peabody124
8897c441fa OP-118 AHRS: Added AHRSCalibration object and messages associated with that to AHRS. Also made AHRS run calibration only when requested. We will create a GCS plugin that runs through computing the calibration settings. To compute the variances on the AHRS set the measure variances to true, wait ten seconds, then set it to false to read it back. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1363 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 21:46:02 +00:00
stac
a960d6e1b1 GPS: fix typo desimal->decimal throughout 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1352 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 16:19:12 +00:00
stac
7b2111e512 baroaltitude: rename AltitudeActual to BaroAltitude 
This is to align the object names to matches the UAVObject
architecture doc.  No functional changes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1351 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 16:19:10 +00:00
peabody124
ba4dc14cea OP-124 Flight: Added fields to the AHRSStatus to track failures of each of the SPI message types. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1347 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 09:21:39 +00:00
peabody124
bb79ba66fa OP-119 AHRS: Converted the big data structures for the WMM calculation to be allocated on the stack, which forced a dependency on FreeRTOS :-( but keeps things on the heap. Also changed the HomeLocation object to include a Set field. When this is false, OP will try and update it whenever it gets a 3D fix. If it is saved to disk with this field as true, then it won't need to get a lock to send the magnetic flux vector to the AHRS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1346 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 08:35:44 +00:00
peabody124
4b0a0236d8 OP-119 AHRS: Increased GPS stack size to allow WWM to not overwrite other memory. In addition converted all the calls to use pointers so I will switch to using pvPortMalloc vPortFree to get it off the stack entirely. Now correctly computing flux for me and running. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1345 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 08:35:41 +00:00
peabody124
2031cfe4d0 OP-119 AHRS: Added error counters for the messages as well as changed an error on AHRS echo back for the HomeLocation message. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1344 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-20 22:52:13 +00:00
peabody124
86766ecc14 OP-119 AHRS: Removed WMM computation for now because it was triggering a reset (probably not watchdog) which is weird - it worked on AHRS. Maybe running out of memory? Also added the break on comm error in ahrs_comms to resync with it. I think the message to send the home location is also not working right now. Fixed chip reset. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1340 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-20 14:48:02 +00:00
peabody124
ef0b307353 [OP-119] Flight/AHRS: Created a HomeLocation object which is updated when the GPS gets an initial 3D fix and populated with the information to convert from LLA from the GPS to NED reference frame. Also added a message for passing the MagneticNorth vector to the AHRS and removed that computation from AHRS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1337 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-19 20:38:27 +00:00
FredericG
fd986f3437 OP-90 Configuring the ET OSD without eLogger. The module can now read a opaque config-file from the SD-card card and send it to the OSD 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1336 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-19 17:32:18 +00:00
peabody124
3c4def13cc AHRS: Added message to pass GPS information into AHRS from OP. This is then converted 
into NED reference frame and used in the INSGPS algorithm, although currently this
information isn't propagated back to OP.  Data structures related to the GPS position
into the algorithm and the position estimate out will likely be in flux.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1334 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-19 05:18:34 +00:00
peabody124
8bcff21184 Flight: Made the actuator module perform a get after set to allow configuration module to override servo position. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1329 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-18 20:47:36 +00:00
FredericG
0b9079e277 ET OSD: removed existing debug and config code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1327 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-18 19:15:43 +00:00
peabody124
cfd20922cd AHRS: Added the filtered data to the attitude raw object. Even though this seems like an oxymoron it's still raw to the EKF algorithm, and nice to see the real values after filtering to make sure nothing weird is going on. However, if people don't like this I'm open to suggestions/patches. I'd maybe suggest the whole attituderaw object be converted to ahrsraw anyway since it's more like that (eg. none of the values are actually attitude estimates). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1325 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-18 14:54:24 +00:00
FredericG
b46bc68e96 "addr" field of I2C transaction struct now takes real I2C address, and not address that is pre-shifted to accommodate the R/W bit 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1321 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-18 10:04:55 +00:00
FredericG
be2f5bbf70 ET OSD: Adapt to new I2C API 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1316 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-18 09:31:54 +00:00
stac
3125ecfc4e AHRSComms: altitude sensor data is now sent to AHRS 
Altitude/pressure sensor data is sent to the AHRS whenever
the AltitudeActual object is updated.

Altitude, Pressure and Temperature are sent as floats.
Same as in the UAVObject that goes to the GCS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1291 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-15 01:02:13 +00:00
stac
c3e509c2cb attituderaw: Replace HeadingActual with AttitudeRaw 
AttitudeRaw now includes:
 - magnetometers XYZ (in mG)
 - gyros XYZ (raw ADC samples)
 - accelerometers XYZ (raw ADC samples)
 - placeholder for gyro temp sensors (read as zero for now)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1289 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-14 23:42:14 +00:00
peabody124
a084d21804 Merge branch 'watchdog' 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1281 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-13 05:18:17 +00:00
stac
f66e2cbd86 battery: fix doxygen header info 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1239 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-08 04:14:56 +00:00
peabody124
0eac218572 Small update to make ManualControl get the command after setting it. That way if the flight system isn't meant to overwrite it (i.e. flying via GCS) it uses the right value. I think this should actually be the default behavior of UAVObject set... awaiting feedback from Vassilis. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1214 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-05 19:56:36 +00:00
cwabbott
d910b8f756 slight changes to get PiOS.win32 to compile 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1205 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-04 14:21:58 +00:00
cwabbott
c2508bbb9e PiOS for win32 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1200 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-03 19:29:14 +00:00
peabody124
47da7326e7 Damn thought I'd commited this 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1176 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-29 13:50:24 +00:00
corvus
02a78f0470 moved Vassilis stabilization module as of r1153 into Stabilization/simple 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1173 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-28 15:03:55 +00:00
corvus
9ad9ffd466 moved new stabilization code into experimental subdirectory 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1172 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-28 15:00:51 +00:00
edouard
9145a4b1a6 Doxygen work: created "OpenPilot System" group for system libraries and core files. Changed a typo on the Osd Doxygen. Let me know if you're OK with this approach. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1169 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-28 07:28:21 +00:00
peabody124
27bcd20882 HID working on Mac for telemetry. Need to tweak GCS code for Win/Linux 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1166 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 20:50:20 +00:00
FredericG
efaa6c910b MKSerial: also report ground-speed 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1162 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 09:49:47 +00:00
peabody124
c46dcea73a Pretty major update of the USB HID core. Removed a lot of old code related to custom drivers and BSL (which will be brought back under HID). Device enumerates but still not communicating. Hopefully nothing broken, lots changed. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1155 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 03:19:07 +00:00
corvus
2621d07574 Added UAVObjects: FlightSituationActual NavigationSettings NavigationDesired 
- Added FlighSituation Module (development module for sensor fusion, mostly stub, possibly renamed later)
- Added Navigation Module (development module for navigating towards a point in space - DEVELOPMENT CODE, NOT STABLE YET (I am testing around with this)) 
- Changed Stabilization Module (uses local reference frame now. Stable except for code cleanup/review. Tested in simulator and outperforms old code.)



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1154 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-26 21:26:28 +00:00
peabody124
d928676f5e More documentation updates, standardizing format to include addtogroup at the beginning of headers so files are associated with modules 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1121 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 19:53:35 +00:00
sambas
f5c24d169e flight/osd: Parse config into setupbits and parameter slots 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1115 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 15:24:29 +00:00
peabody124
99e94228a9 More doxygen updates 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1106 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 05:31:11 +00:00
peabody124
1cd81e211f Added Doxygen comments for OpenPilot modules 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1101 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 01:02:34 +00:00
corvus
fa57e42efa Deleted OpenPilot.posix branch. Integrated portability modifications into main tree 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1086 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-13 16:23:41 +00:00
FredericG
5bb4fedc7f attitude seq field was removed 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1065 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 12:25:43 +00:00
vassilis
9f2a01a78a Flight/Servo Fix Servo driver buffer overflow, was messing up the I2C and altitude readings, now working fine. Servo index used to be 1-8 but the Servo driver was indexing a buffer out of bounds. Changed everything to use index 0-7 for servo outputs. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1061 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 01:54:43 +00:00
stac
3896baa908 usb hid: fix compiling with ALLOW_HID_TELEMETRY 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1060 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-10 14:56:27 +00:00
sambas
9003cd8eca OP-97 flight/GPS: GeoidSeparation added, need to think that precision problem 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1056 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-10 07:27:07 +00:00
stac
17bea4cb91 ahrscomms: connect the OP board to the AHRS board 
The AHRS comms module now sync's with the AHRS and
exchanges interesting data periodically.  Whenever
the link to the AHRS is down, the AHRSComms alarm is
raised.

This is fairly basic for now but provides the last
piece of the infrastructure to move data back/forth
between the OP and the AHRS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1014 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-04 02:21:49 +00:00
stac
548a32f18b attitude: Rename Attitude module to AHRSComms 
The Attitude module will soon be handling updates for all UAVObjects
that require data from the AHRS.  To reflect this expansion of scope,
it has been renamed to AHRSComms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1009 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-04 02:21:37 +00:00
stac
1cc6981ee5 attitude: Remove seq field from uavobject 
The sequence number field for the attitude solution is
likely unnecessary.  Removed.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1000 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-04 02:21:04 +00:00
sambas
1a7a9aa250 flight/osd: config write retry routine, my original empty config array. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@986 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-02 18:49:42 +00:00
sambas
aa1ddca8bf flight/osd: ET osd write config work, dump format also same as write array. use with caution 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@985 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-02 14:54:04 +00:00
FredericG
55f13788de FlightBatteryState Object : Made Voltage and Current fields float 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@895 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-26 10:59:11 +00:00
FredericG
8204143f9d MKSerial: Do not generate BatteryState as this is now generated by the battery-module 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@894 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-26 10:31:27 +00:00
FredericG
302be3ee6f OSD: Send battery-current info to OSD. Consumed mAh is calculated by the OSD 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@893 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-26 10:27:10 +00:00
vassilis
c74eb2f0e9 OP-26 Flight/Stabilization First release of stabilization module. Tested using FlightGear, default tuning is for the HITL simulation. Works fairly well but a number of improvements can be made to aid tuning. The ManualControl settings must be first set as you would normally do for HITL simulation, flight mode is changed using the mode channel. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@887 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-25 02:28:16 +00:00
FredericG
6ef11148b5 First version of battery module 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@882 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-24 11:10:43 +00:00
FredericG
6c40edccf2 ET OSD: WIP: dumping of config-blob to serial port 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@852 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-21 20:02:03 +00:00
FredericG
d7390a07a5 MKSerial: use AUX port 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@840 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-20 18:08:41 +00:00
FredericG
524201d3b6 MKSerial: Complete PositionActual Obj 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@818 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-19 11:04:49 +00:00
FredericG
ceadcf49a0 OSD: Also use PositionActual object 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@817 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-19 11:02:43 +00:00
FredericG
e3815bf8b8 OSD: start displaying real data WIP 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@765 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-14 16:50:01 +00:00
vassilis
106bdca20e Flight/Actuator Go to failsafe actuator outputs when a command is not received 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@763 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-14 02:00:16 +00:00
fredericg
0731747d84 new object: FlightBatteryState 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@762 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-13 17:21:31 +00:00
fredericg
4e15413fc9 MkSerial, adapt to COM_USARTX => PIOS_COM_X 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@761 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-13 11:18:42 +00:00
stac
771a56ca9d com/usart: generalize com driver API 
- Created a pluggable COM layer
- Converted COM + USART init into static initializers
  rather than typedefs
- Generalized the USB HID COM API to match the USART
  API.
- Changed USART and COM layers to be data driven rather
  than #ifdef'ing/switching on the specifics of each port

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@760 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-13 04:24:26 +00:00
FredericG
f8b793e54d ET OSD, WIP. Encoding of voltage and GPS data is now known 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@750 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-12 17:44:24 +00:00
fredericg
39aaf0868a MkSerial: Adapt to GpsPosition => ActualPosition 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@744 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-11 15:54:13 +00:00
vassilis
eaa9d97939 Flight/GPS Renamed GPSObject to PositionActual and implemented field for GPS status (NoGPS, NoFix, Fix2D and Fix3D) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@734 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-10 01:28:06 +00:00
FredericG
5472d531e7 Starting OSD module for ET OSD Std 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@732 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-09 20:43:43 +00:00
FredericG
2895925bd2 Small fixes 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@726 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-07 19:56:42 +00:00
fredericg
426b4344b0 Detect if connected to NaviCtrl or FlightCtrl and use appropriate messages - untested 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@725 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-07 14:50:48 +00:00
fredericg
2e6e2537f5 Fix: including of Example Module did not work any more 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@724 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-07 11:12:58 +00:00
FredericG
db629cebc5 Some cleanup 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@717 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-05 15:32:57 +00:00
FredericG
8a7eba0675 List of modules in Makefile - Automatic init of included modules 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@716 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-05 15:17:31 +00:00
FredericG
7476aa61b9 Fixes: TO did not work / values need to be signed 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@712 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-03 19:57:58 +00:00
fredericg
f8f2c3b5d2 Timeout detection in WaitForMsg 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@711 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-03 16:31:48 +00:00
stac
e2721136ae GPS: fix buffer overrun in nmeaProcess() 
nmeaProcess was attempting to null-terminate the
NMEA sentence but was not considering that the
preceeding loop may have looped beyond the end
of the packet buffer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@709 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-03 13:58:18 +00:00
fredericg
6577dce1d5 Report attitude obj 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@707 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-03 11:32:02 +00:00
fredericg
59250845ea MKSerial: composing messages 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@703 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-02 19:44:57 +00:00
FredericG
4d227cd8b6 MKSerial: print attitude 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@702 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-02 06:57:41 +00:00
sambas
c53aa219d5 OP-25 Flight/GPS: Speed from knots to m/s 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@691 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-30 18:09:37 +00:00
fredericg
0fc8240b12 Display incoming messages - untested 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@688 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-30 13:28:53 +00:00
sambas
4f4391708e OP-25 Flight/GPS: Heading and GroundSpeed used, speed in knots? 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@687 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-30 06:31:58 +00:00
vassilis
6414887dcc Flight/ManualControl Added support for reversing inputs 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@685 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-30 01:58:15 +00:00
fredericg
dc2e7a041a Moved MKSerial to Modules/MK dir 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@672 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-27 10:30:39 +00:00
sambas
ebff9f3638 OP-25 Flight/GPS: New GPS fields in use 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@665 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-25 05:32:43 +00:00
vassilis
9be49ca54d Flight/Attitude Minor change in field names and task priority 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@662 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-25 00:49:46 +00:00
sambas
ec40618664 OP-25 Flight/GPS: Optimized GPS, buffer overflow fixed, RMC sentence handler 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@660 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-24 19:49:37 +00:00
stac
6b2760da1a USB HID: basic COM functionality over USB HID 
This fixes the COM interface over USB HID to the point where
it can establish and maintain solid communications with the UAVObject
Browser in the GCS.

Tested only on Linux.  The USB HID interface is still disabled for now
until it is tested successfully by a wider group.

Edit telemetry.c and set ALLOW_HID_TELEMETRY to 1 to enable telemetry
over the USB HID interface and report your results in the forum.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@656 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-24 16:33:40 +00:00
stac
69de42db49 Add AHRS attitude module and driver skeletons 
- New Attitude module for AHRS (skeleton)
 - New AttitudeSettings UAVobject
 - New AttitudeActual UAVobject
 - Regenerated UAVobjects
 - Added new UAVobjects to OpenPilot and GCS builds
 - New PiOS driver for OpenPilot AHRS (stubs only)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@655 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-24 16:33:36 +00:00
FredericG
0723ff8b75 Started new module 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@650 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-23 19:01:07 +00:00
vassilis
f143628e80 Flight/Altitude Update altitude object with new metafields, modified update rates in XML and flight s/w 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@645 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-20 01:21:44 +00:00
stac
d02a3325d9 altitude: Add altitude module which reads BMP085 
This module reads from the BMP085 pressure sensor.  It periodically
updates the pressure (kPa) and temperature (C) as well as the
calculated altitude (m).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@640 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-19 04:55:56 +00:00
sambas
b7601c9765 OP-25 Flight/GPS: changes for OPGPS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@639 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-18 12:49:47 +00:00
vassilis
6b6740109e OP-32 Flight Initial release of Actuator (ServoOut) and ManualControl (ServoIn) modules, still work in progress (not fully tested). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@632 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-17 01:58:38 +00:00
sambas
1bb32e78f1 Flight/telemetry: Missed one 38400 relates stuff 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@614 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-08 16:47:12 +00:00
vassilis
6dfd8caffb OP-4 Flight/Telemetry Add connection timeout detection 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@608 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-08 04:11:03 +00:00
vassilis
a31215293d Flight\Telemetry Implement telemetry settings object, added functions for changing the baud rate in PiOS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@607 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-08 02:44:26 +00:00
vassilis
a337de22c7 OP-4 Flight/Telemetry Flush telemetry queues while connection is not yet established (to remove stale data) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@605 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-08 00:22:07 +00:00
vassilis
7ca10bf5d7 OP-4 Flight/ObjectPersistance Implemented saving/loading of individual objects from the SD card 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@580 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-04 02:11:16 +00:00
vassilis
e10a16f1c3 OP-4 Flight/Telemetry Implemented telemetry connection manager 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@578 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-04 01:29:04 +00:00
vassilis
0999c1ce58 Flight/Objects Metaobjects are now also stored in CF and retrieved on power-up. At this time settings and meta objects are automatically loaded on startup if they have been saved in the CF card (to test use Save button in the object browser), if a file is not found in the CF card then the defaults specified in the XML file will be used. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@561 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-04-30 02:28:16 +00:00
vassilis
99b67388bf Flight/UAVObjects Added support for default field values (used to initialize settings with defaults) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@558 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-04-28 01:54:24 +00:00
vassilis
8c11a03129 Flight/Alarms Implemented Alarms library, now checking for stack overflow, out of memory, event and other errors (see the SystemAlarms object). All modules will be reporting their alarms using this library. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@554 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-04-27 01:55:28 +00:00
vassilis
7b99c3d7f0 Flight/System Restructure start-up code, now all initialization in done after the RTOS is started 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@541 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-04-25 02:21:03 +00:00
vassilis
ecb83a52d3 OP-4 Flight/Telemetry Bug fixes and improved response when telemetry is fully loaded 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@539 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-04-24 04:05:39 +00:00
sambas
b8b5bffe4d OP-25 Flight/GPS: using strsep instead of strtok_r (thanks for the hint PeterG). Prepared for GPGSA. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@535 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-04-21 09:56:23 +00:00
sambas
923ee3ccaf OP-25: gpsinfo removed, cleaned things up. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@522 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-04-18 07:37:55 +00:00
vassilis
40beb15129 OP-4 Flight/System Created CPU utilization measurement and created object to report system information (load, heap and time) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@519 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-04-18 02:13:59 +00:00