Alessio Morale
43c3693248
OP-1212 add priority flag to some uavobjects
2014-02-04 21:04:08 +01:00
Corvus Corax
4ab4e48a98
OP-942 added missing new xml file
2014-02-03 01:05:30 +01:00
Alessio Morale
68d676db64
OP-1149: limit accel/gyro correction to calibrated temperature range.
2014-01-31 21:01:09 +01:00
Alessio Morale
f1bea0556d
OP-1149: limit baro correction to calibrated temperature range.
2014-01-28 23:08:28 +01:00
Philippe Renon
b58620c981
OP-1184 removed obsolete plots from the stack scope monitor gadget
...
did same in TaskInfo uav object
2014-01-24 00:17:47 +01:00
Alessio Morale
02c7084196
Merge remote-tracking branch 'origin/next' into amorale/OP-1149_gyro_accel_thermal_calibration
...
Conflicts:
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2014-01-23 01:02:13 +01:00
Alessio Morale
831817e15d
OP-1022: reenable AH/AVario modes from "Flight Mode Switch Settings" GUI
2014-01-18 17:28:43 +01:00
Alessio Morale
1f61676d0a
Merge branch 'amorale/OP-1152_stack_verification' into next
...
Conflicts:
flight/targets/boards/coptercontrol/firmware/inc/pios_config.h
2014-01-18 13:54:06 +01:00
Cliff Geerdes
02dfac7e6e
OP-1167 set default for FSM switch to first position
2014-01-17 23:52:16 -05:00
m_thread
234626444e
Merge remote-tracking branch 'origin/next' into thread/OP-1154_Cruise_Control_automatically_increase_copter_throttle_per
2014-01-17 13:16:15 +01:00
Fredrik Arvidsson
627da4951b
OP-984 Changed datatype of field CruiseControlFlightModeSwitchPosEnable to enum (TRUE|FALSE) instead of uint8.
...
Now the gui works, but the flight side must be checked for problems.
2014-01-17 01:32:29 +01:00
Corvus Corax
41202a0227
Merge branch 'corvuscorax/OP-1022_AH_improvements_amorale' into next
2014-01-15 22:47:42 +01:00
Les Newell
2b32c5ebc3
Merged theothercliff/OP-1154_Cruise_Control_automatically_increase_copter_throttle_per_1/cos(bank_angle)
...
Changed pid banks to use flight mode switch position instead of FlightStatus.FlightMode
2014-01-15 19:37:13 +00:00
Les Newell
f096d01e3c
Merge branch 'next' into LesNewell/OP-984_PID_banks_flightmode
2014-01-15 19:17:06 +00:00
Philippe Renon
694747cd27
Merge remote-tracking branch 'origin/next' into filnet/OP-1122_gcs_waypoint_editor_stabilization
...
Conflicts:
ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
2014-01-15 20:12:08 +01:00
Cliff Geerdes
e6490c0cea
OP-1154 Add FlightModeSwitchPosition to ManualControlCommand
2014-01-15 13:53:14 -05:00
Corvus Corax
9997f14d68
Merge remote-tracking branch 'origin/next' into corvuscorax/OP-1022_AH_improvements_amorale
2014-01-15 18:45:09 +01:00
Corvus Corax
92beb54e2d
OP-1022 some small cosmetic fixes for AltitudeHold as suggested by Alessio
2014-01-15 18:43:47 +01:00
Corvus Corax
3b635693a5
OP-1161 changed the way magnetometer-errors are handled - and defaults
...
* ekf will ignore magnetometer errors for initialization
(errors might be caused by not yet existing attitude estimation)
* defaults changed for filtering
* magnetometer sensor will be available for all filters, alarms need to
be checked separately
2014-01-14 21:09:14 +01:00
Philippe Renon
7f2c24db2b
OP-1122 OP-1158 - renamed uavobject FlightPlan to PathPlan
...
+review OPReview-609
2014-01-14 21:05:16 +01:00
Corvus Corax
3d1cc31c3b
OP-1161 Add alarm for magnetometer plausibility check
2014-01-14 12:22:01 +01:00
Corvus Corax
07d5c8e4d2
OP-1022 fixed the config plugin widget to represent new simpler settings layout
2014-01-14 00:26:27 +01:00
Corvus Corax
cb9e76b006
OP-1122 add flightplan safety check to pathplanner - failsafe rth when flightmode is set to pathplan but no valid plan is uploaded
2014-01-12 21:05:54 +01:00
Philippe Renon
ff8a001a51
Merge remote-tracking branch 'origin/next' into filnet/OP-1122_gcs_waypoint_editor_stabilization
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configpipxtremewidget.cpp
ground/openpilotgcs/src/plugins/uavobjectutil/uavobjectutilmanager.cpp
2014-01-12 16:29:17 +01:00
Philippe Renon
aa24f2193a
OP-1122 OP-1158 renamed FlightPlanInfo uavobject to FlightPlan
2014-01-12 15:23:21 +01:00
Cliff Geerdes
ccc09721cd
OP-1154 Initial version with UAVO's but no GCS GUI
2014-01-11 16:22:20 -05:00
Corvus Corax
879e29b6cd
OP-1022 Changed altitude (vario) complementary filter to pay more attention to barometer and apply more filtering to accelerometer (needed to compensate vibration noise and errors on flying quads)
2014-01-11 14:12:02 +01:00
Corvus Corax
ca607ad924
OP-1022 overhaul of altitudehold and manualcontrol - cleanup,
...
reimplemented safe throttle cutoff and altitudevario features
2014-01-11 10:51:47 +01:00
Fredrik Arvidsson
92c7e96fc8
Merge remote-tracking branch 'origin/LesNewell/OP-984_PID_banks' into thread/OP-984_PID_banks_GUI
...
Conflicts:
ground/openpilotgcs/src/plugins/config/stabilization.ui
2014-01-11 09:41:36 +01:00
Corvus Corax
4c078f3dd8
Merge branch 'next' into corvuscorax/OP-1022_AH_improvements_amorale
2014-01-11 09:40:34 +01:00
Les Newell
49cf33ee59
Merge branch 'next' into LesNewell/OP-984_PID_banks
...
Conflicts:
flight/modules/Stabilization/stabilization.c
2014-01-10 19:32:44 +00:00
Philippe Renon
48aa89d2e7
OP-1122 OP-1120 OPLinkReceiver uavobject had no caterogy defined (is now part of the System category)
2014-01-09 21:48:27 +01:00
Philippe Renon
8c7792b6e5
OP-1122 OP-1120 Added a new FligthPlanInfo uavobject
...
- FligthPlanInfo contains the number of waypoints and action pathes
- FligthPlanInfo contains a CRC of all waypoints and action pathes
- The CRC is not yet implemented
- These informations will be used to check the consistency of a flight plan
2014-01-09 01:06:00 +01:00
Philippe Renon
772c395e67
OP-1122 OP-1145 fixed handling of ground messages done by OPLM
...
- OPLM used to receive and relay all messages
- OPLM will now reveice only specific messages and relay others as required (needs to be reviewed...)
- add RadioComBridgeStats uavobject to collect and report tx/rx statistics
- made error handling more robust
- added a few FIXMEs
2014-01-06 21:35:00 +01:00
Alessio Morale
fff060ed9d
OP-1153 Add a way to monitor SystemMod stack usage without DIAG_TASKS=y
...
SystemStats.SystemModStackRemaining field does contains the relevant information.
2014-01-05 23:28:31 +01:00
Cliff Geerdes
a48b9cc242
OP-1117 reduced CPU for CC/3D coded log2f() / powf()
2014-01-04 04:22:54 -05:00
Corvus Corax
a322c14d35
changed defaults for altitude hold control loop coefficients
2014-01-02 17:17:19 +01:00
Corvus Corax
f5dbe29896
Merge remote-tracking branch 'origin/amorale/OP-1139_baro_2nd_order_compensation' into corvuscorax/OP-1022_AH_improvements_amorale
2013-12-31 16:38:15 +01:00
Fredrik Arvidsson
955e1f1e08
OP-984 Chnaged field type to enum and added options in uavo definitions.
2013-12-29 17:46:37 +01:00
Alessio Morale
260db3446c
OP-1149 changes in CC/CC3D code to use AccelGyroSettings for bias/scale instead of AttitudeSettings.
...
Bias units of measure are now normalized between CC/CC3D/Revo.
2013-12-29 14:08:53 +01:00
Corvus Corax
505d334c4b
simplified altitude hold control loop
2013-12-27 18:37:27 +01:00
Alessio Morale
7ac2f9f87f
OP-1149 Move accel/gyro calibration setting to a separate object, to be reused also for CC3D
2013-12-26 16:55:57 +01:00
Alessio Morale
558e2e1437
OP-1149 introduce a first order temperature calibration for gyro and accel.
...
gyro Z is instead using a 2nd degree polinomial for better accuracy as
its drift is harder to be corrected as with the other twos.
2013-12-25 18:11:53 +01:00
Cliff Geerdes
14aa1f83de
OP-1117 make anti windup insensitive to Ki changes, include dT in calcs, linearize config spinner
2013-12-19 03:21:30 -05:00
Philippe Renon
02e3970864
OP-1122 OP-1145 ground side uavtalk and telemetry enhancements
...
- added more stats (bytes, sync errors, crc errors)
- made error handling more robust
2013-12-19 03:19:29 +01:00
Philippe Renon
5f33fadb1b
OP-1122 OP-1145 flight side uavtalk and telemetry enhancements
...
- added more stats (bytes, sync errors, crc errors)
- made error handling more robust
- added some optional PIOS_DEBUGLOG calls
- fixed a timestamp handling bug
2013-12-19 00:17:08 +01:00
Cliff Geerdes
56b4d8647f
OP-1117 Rename Horizon to Rattitude, Anti Windup and dT additions
2013-12-18 05:01:16 -05:00
Cliff Geerdes
150dbebc63
OP-1117 MultiWiiHorizon flight mode only (not cliffs H1 or H2)
2013-12-15 22:02:06 -05:00
Les Newell
63ecf6ad73
OP-984 txpid can now select which bank it operates on, rather than using the flight mode selected bank.
2013-12-11 17:09:12 +00:00
Les Newell
5833e2a7cc
OP-984 Added one UAVObject per PID bank
2013-12-11 17:08:51 +00:00
Les Newell
fc1a4ce3bb
OP-984 cleaned up stabilization bank object
2013-12-11 17:08:14 +00:00
Les Newell
ec713be3ea
OP-984 Added data UAV object for current stabilization bank
2013-12-11 17:08:10 +00:00
Alessio Morale
634ba79dcb
OP-1141: allow to input a barometer bias model.
...
It uses a 3rd degree polynomial to model pressure bias as a function of temperature.
2013-12-10 01:46:28 +01:00
Philippe Renon
617924e64d
Merge remote-tracking branch 'origin/next' into filnet/OP-1122_gcs_waypoint_editor_stabilization
...
Conflicts:
flight/uavobjects/uavobjectmanager.c
ground/openpilotgcs/src/plugins/uavtalk/telemetrymanager.cpp
ground/openpilotgcs/src/plugins/uavtalk/uavtalk.pro
shared/uavobjectdefinition/pathaction.xml
shared/uavobjectdefinition/waypoint.xml
2013-12-08 14:58:01 +01:00
Corvus Corax
3cea14a809
added missing object, added more debug output
2013-12-08 13:06:28 +01:00
Corvus Corax
4ad0e730da
added status uavobject for easier debugging
2013-12-08 12:23:16 +01:00
Corvus Corax
623c25aa99
new design of altitude hold - warning not tested yet!
2013-12-07 23:16:22 +01:00
Corvus Corax
a4d53c18ac
got rid of altholdsmoothed uavobject
2013-12-07 20:14:02 +01:00
Corvus Corax
3e1b0fd114
Merge branch 'next' into corvuscorax/OP-1022_AH_improvements_amorale
2013-12-07 16:33:57 +01:00
Philippe Renon
398a3ab0e6
OP-112 OP-1120 waypoint editor now sends and requests Waypoints and PathActions in a transacted and asynchronous manner. Board does not send Waypoints and PathActions periodically anymore.
2013-12-01 19:38:23 +01:00
Corvus Corax
77b7ba3089
Added new setting 'OnlyWhenArmed' to debuglogsettings
2013-11-19 19:29:24 +01:00
Corvus Corax
3bfe74e73c
added some in uavobject definition comments
2013-11-19 18:55:38 +01:00
Corvus Corax
3f1ea5ed09
set all uavobjects logging mode to manual
...
enable only at users discretion as needed to preserve log space
2013-11-17 20:45:04 +01:00
Corvus Corax
fcc479f5cb
more intelligent log interfacing, including flash formatting option
2013-11-17 20:14:50 +01:00
Corvus Corax
a0746d87fa
Logging facility: logs debug data to logfs and exports it through container UAVObject
2013-11-17 02:54:26 +01:00
Alessio Morale
11b269f898
Merge remote-tracking branch 'origin/next' into amorale/OP-1058_uavo_named_accessors
2013-08-31 16:03:30 +02:00
Mathieu Rondonneau
151d44b8e7
OP-1070 GrountTruth object sent to FC.
...
this should not be the case so remove it from periodic list.
2013-08-14 17:01:54 -07:00
Corvus Corax
0f31368c64
Merge branch 'corvuscorax/OP-1036_fixed-wing-improvements' into next
2013-08-11 15:13:23 +02:00
Alessio Morale
9e1acc3165
OP-1058: fix needed for fw_revolution code compilation
2013-07-31 15:24:26 +02:00
Oleg Semyonov
77a6db3007
Merge remote-tracking branch 'origin/os/baro-offset-lpf' into next
2013-07-30 23:41:37 +02:00
Oleg Semyonov
1bfa66c2b6
Change settings for baro altitude offset correction
2013-07-26 21:14:44 +02:00
Corvus Corax
c8044206a4
adjusted default for max pid after test flight
2013-07-20 16:27:49 +02:00
Corvus Corax
2ecbf4a846
add code to scale stabilization PID coefficients by 1/airspeed^2 if the user wishes to do so
2013-07-20 13:52:45 +02:00
Corvus Corax
b3cbb57a2b
made low pass filter alpha a setting
2013-07-20 10:40:29 +02:00
Corvus Corax
02f11eeb5b
Merge branch 'next' into corvuscorax/OP-1036_fixed-wing-improvements
2013-07-20 08:52:56 +02:00
Alessio Morale
6b27ff1e27
OP-1022 add position lowpass, rework setting uavo, cleanup
2013-07-19 11:28:48 +00:00
Oleg Semyonov
aa560653d4
Make baro altitude offset (relative to GPS alt) filter configurable
2013-07-19 09:53:44 +03:00
Corvus Corax
ea8373b0f7
re-enabled wind estimation absed on groundspeed
2013-07-18 20:01:02 +02:00
Sambas
c10cbc1e90
Better defaults for VtolPathFollower, tested successfully with couple different frames.
2013-07-18 20:56:15 +03:00
Corvus Corax
50561bfb5f
made arming/disarming sequence time configurable - useful for heli pilots that like almost-instant disarm
2013-07-18 13:13:23 +02:00
Corvus Corax
114e25ff5d
cleaned up code for armin/disarming and got rid of a bunch of assumptions
2013-07-18 13:05:37 +02:00
Corvus Corax
658b2fc804
cherry-pick of Sambas Arm-On-A-Switch capability implementation
2013-07-18 10:45:36 +02:00
Corvus Corax
6c88184b32
Merge branch 'corvuscorax/OP-1036_fixed-wing-improvements' into next
2013-07-18 09:46:23 +02:00
Corvus Corax
276c0bb312
fixed default settings on fixed wing path follower safety margins
2013-07-18 09:33:36 +02:00
Corvus Corax
bffe119214
made safety checks in fixed wing path follower configurable
2013-07-17 14:50:23 +02:00
Alessio Morale
005a68826d
OP-1022 Converted to a plain Altitude PID + Velocity PI implementation
2013-07-17 08:38:44 +00:00
Werner Backes
7138faf167
Adjusted default settings for altitude hold.
...
Conflicts:
shared/uavobjectdefinition/altitudeholdsettings.xml
2013-07-16 21:25:34 +00:00
Werner Backes
45cebda628
Add a configurable lowpass filter to smooth throttle commands in
...
AltitudeHold mode.
Conflicts:
flight/modules/AltitudeHold/altitudehold.c
shared/uavobjectdefinition/altitudeholdsettings.xml
2013-07-16 21:21:21 +00:00
Werner Backes
7708aab313
Added vertical velocity as a control loop input to improve dynamics during
...
commanded ascend/decent.
Conflicts:
flight/modules/AltitudeHold/altitudehold.c
flight/modules/ManualControl/manualcontrol.c
shared/uavobjectdefinition/altitudeholdsettings.xml
2013-07-16 21:17:32 +00:00
Alessio Morale
0203e2c6e2
OP-1022 Adding a proportional term on the square of the altitude error.
2013-07-16 20:01:16 +00:00
Alessio Morale
5b4d46819e
OP-1022 Fix problem with EventSystem due to too high update rate
2013-07-16 12:25:58 +00:00
Alessio Morale
e975e4d9b7
OP-1022: replace old KF in alitude hold with status from filters
2013-07-16 12:25:57 +00:00
Alessio Morale
133ad414f8
OP-1022: Added a velocity loop in AH module, used when throttle is not in central position.
2013-07-16 12:25:57 +00:00
Alessio Morale
11bc7804d0
Merge branch 'amorale/OP-994_adc_cleanup' into next
2013-07-16 12:23:25 +00:00
Corvus Corax
81e691f2d6
fixed stack size for manualcontrol, fixed acking behaviour for waypoints
2013-07-16 10:12:16 +02:00
Corvus Corax
95079db030
changed fixedwingpathfollowe powerPi default
2013-07-15 22:51:13 +02:00
Corvus Corax
47adbb98a1
updated EKF configuraton defaults, mags less sensitive to engine noise
2013-07-15 22:46:27 +02:00
Corvus Corax
f831343c73
making pathactions and waypoints acked uavobjects for more robust update over telemetry
2013-07-15 22:21:13 +02:00
Corvus Corax
8b6510da4f
Made AltitudeOffset for ReturnToHome configurable, Made Failsafe-FlightMode configurable.
2013-07-15 09:14:09 +02:00
Alessio Morale
402c84c003
OP-994 Added zero calibration settings
...
+review OPReview-506
2013-07-14 20:26:07 +00:00
Corvus Corax
65f890982e
adjusted default fixed wing pathfollower settings to be more reasonable
...
tags: dekenzification
2013-07-11 14:02:05 +02:00
Corvus Corax
c1f32e9beb
OP-1036: rename some settings and move them in the right place
...
tags: de-kenzification
2013-07-10 15:55:12 +02:00
Corvus Corax
27eadc200b
Merge branch 'corvuscorax/lla2nedfilter' into next
...
Conflicts:
flight/modules/StateEstimation/stateestimation.c
2013-07-10 14:38:12 +02:00
Corvus Corax
551780c74b
Merge branch 'corvuscorax/complementary_altitude_filter' into next
...
Conflicts:
flight/targets/boards/revolution/firmware/UAVObjects.inc
2013-07-10 14:27:25 +02:00
Brian Webb
c2df59498b
Merge remote-tracking branch 'origin/master' into next
2013-07-06 07:08:30 -07:00
Brian Webb
d0d8a0aadd
OP-932 Adds PWM outputs to OPLinkMini. Both gpio pins on the main and/or flexi port can be configured to output PWM for a total of up to 4 PWM outputs.
2013-07-03 18:58:34 -07:00
Corvus Corax
0107432e45
Added a low pass filter for accels to the altitude filter
2013-07-02 23:17:08 +02:00
Corvus Corax
a259e6d62c
removed now unneeded line from systemsettings (moved to gpssettings)
2013-06-30 20:06:42 +02:00
Corvus Corax
b3aa81d983
added missing file
2013-06-30 20:04:32 +02:00
Corvus Corax
51a4b16af5
New Filter to calculate NED from LLA as part of StateEstimation
2013-06-30 18:49:29 +02:00
Corvus Corax
7745f93935
changed default coefficients and exposed them to a settings uavobject as they should be
2013-06-29 01:16:02 +02:00
Brian Webb
2aea2342ab
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
2013-06-26 18:01:54 -07:00
Brian Webb
f8d60e6dee
OP-932 Adds additional thread and UAVTalk connection to the telemetry module that reads from the uart/radio link on the Revo. This allows the Revo to read OAVObjects over both the uart/radio link and the USB link at the same time. Unfortunately, there's no way to know which link to send UAVObjects out on, so all UAVObjects go to the USB port if USB is connected. This allows UAVObjects to be received from the OPLink radio, even when USB is connected.
2013-06-26 17:58:02 -07:00
Brian Webb
774a74884a
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
2013-06-26 17:57:11 -07:00
Brian Webb
8c370df319
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
2013-06-26 17:56:56 -07:00
Brian Webb
08efc8d152
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
2013-06-26 17:56:20 -07:00
Corvus Corax
0c43346292
Merge branch 'corvuscorax/OP-947_stateestimator-module' into next
...
Thanks everyone for helping getting this together, especially Alessio
and DLite :-)
2013-06-25 23:48:12 +02:00
Corvus Corax
e2fca0fcdd
bugfix in uavobject definition
2013-06-25 19:32:50 +02:00
Corvus Corax
f2abe1f5c7
StateEstimation: removed (not yet implemented) 16 state EKF support for now
2013-06-25 19:30:21 +02:00
Oleg Semyonov
9fce86b662
Temporary disable AltitudeHold and AltitudeVario flight modes
...
They were not officially supported. But since people expected the
well-known production quality behavior, it is better to make them
final, then reenable.
2013-06-24 18:08:02 +03:00
Corvus Corax
6f38e26a53
Categorizing all UAVObjects into 5 main categories:
...
State, Sensors, System, Navigation, Control
2013-06-22 19:58:54 +02:00
Corvus Corax
6163c5f53a
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
...
Conflicts:
flight/modules/AltitudeHold/altitudehold.c
ground/openpilotgcs/share/openpilotgcs/pfd/default/AltitudeScale.qml
ground/openpilotgcs/share/openpilotgcs/pfd/default/PfdIndicators.qml
ground/openpilotgcs/share/openpilotgcs/pfd/default/SpeedScale.qml
ground/openpilotgcs/src/plugins/pfd/pfdgadgetwidget.cpp
2013-06-22 18:44:03 +02:00
Alessio Morale
4a793c47ad
Changed default AH parameters
2013-06-21 18:42:46 +02:00
Alessio Morale
5318c20de6
OP-1019 add a simple altitude hold
2013-06-20 11:27:45 +02:00
Corvus Corax
1d17d08cca
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
2013-06-12 18:32:01 +02:00
David Ankers
8fd8847ada
Slightly update default stab settings, now matchs L,U&E
2013-06-12 19:59:47 +10:00
Corvus Corax
f051b7c319
fixed uavobject update mode for GCS
2013-06-09 22:19:54 +02:00
Alessio Morale
e9b3ee52f3
OP-997: add fields to SystemStatsUavo to monitor storage status
2013-06-09 19:20:00 +02:00
Alessio Morale
cea6496866
OP-995: Cleanup of Battery Module
2013-06-08 13:53:19 +02:00
Corvus Corax
6fdf554d4a
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
...
Conflicts:
flight/modules/Attitude/revolution/attitude.c
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
shared/uavobjectdefinition/attitudesettings.xml
2013-06-06 19:25:54 +02:00
Corvus Corax
5e306250a5
Enabled simulated sensors in SimPosix for debugging of EKF behaviour including:
...
- SimPosix again stores and reads UAVObjects to disk (was disabled by someone)
- simulated sensors moved to allow automated module initialisation in simposix
- fixed a categorization bug in a uavobject
2013-06-05 19:34:48 +02:00
Corvus Corax
cdf9eaba64
new default variances to go with new mag var calculation
2013-05-29 23:39:18 +02:00
Corvus Corax
6435604182
some fixes and corrections as suggested in review
2013-05-29 22:18:08 +02:00
Alessio Morale
6b2218d1df
Merge remote-tracking branch 'origin/amorale/OP-925_Cyr_patches_for_revo_cf' into next
2013-05-28 18:39:42 +02:00
Fredrik Arvidsson
316afefff7
OP-906 Changed defaults for Stabilization settings and Flight modes.
2013-05-27 22:25:17 +02:00
Alessio Morale
c40976c260
OP-925 converted mixed tabs/spaces to spaces only
...
+review OPReview-484
2013-05-27 20:11:59 +02:00
Alessio Morale
78dda599f5
OP-939 Changed default power output for OPLink and Revo to lowest setting
2013-05-26 18:09:15 +02:00
Alessio Morale
9bfce1bcd6
Merge remote-tracking branch 'origin/amorale/OP-925_Cyr_patches_for_revo_cf' into next
2013-05-26 16:18:05 +02:00
Corvus Corax
b916df5448
ported cyr's patch to new CF
2013-05-24 23:59:12 +02:00
Corvus Corax
1353be6cb0
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
2013-05-24 19:33:27 +02:00
Brian Webb
5fcc8a1785
Changes default for RemoteMainPort in OPLinkSettings UAVObject to Disabled from Telemetry, which was not in the list of possible choices.
2013-05-23 22:02:31 -07:00
Corvus Corax
843db63cf6
some last issues from review
2013-05-22 23:08:48 +02:00
Corvus Corax
9b95af2006
refaktored GPS Sensor UAVObjects
2013-05-22 22:36:23 +02:00
Corvus Corax
b56de3b66b
filterchain rework
2013-05-22 21:26:18 +02:00
Alessio Morale
0b5a28f19e
Port OP-754 to Revolution attitude estimation module: subtract GyroBIAS to work on raw value
...
Added MagKp and MagKi to AttitudeSetting UAVO
2013-05-21 23:44:12 +02:00
Corvus Corax
d258caad3f
Merge branch 'corvuscorax/OP-946_refaktor_sensor_and_state' into corvuscorax/OP-947_stateestimator-module
2013-05-20 10:34:40 +02:00
Corvus Corax
1236bf3ed9
renamed Magneto to Mag
2013-05-20 10:33:02 +02:00
Corvus Corax
bc6f06e943
first filter implemented and some bugs fixed
2013-05-19 22:24:12 +02:00
Corvus Corax
2ab9f938c9
ongoing dev work, incomplete
2013-05-19 22:24:12 +02:00
Corvus Corax
9c3a8369cd
OP-946: State And Sensor Refaktoring: Moved Filtering for Magnetometers, Gyros and Accels into Attitude
2013-05-18 21:55:47 +02:00
Corvus Corax
5284195c29
Refaktored sensor and state UAVObjects consistently into XXYSensor and XXYState
2013-05-18 19:36:45 +02:00
Alessio Morale
ff16dd03e7
Merge branch 'amorale/OP-938_ah_improvements' into next
...
Conflicts:
flight/modules/AltitudeHold/altitudehold.c
flight/modules/ManualControl/manualcontrol.c
2013-05-13 23:30:46 +02:00
David Ankers
417a0befd3
Change MaxAxisLock (angle) to be 30 deg.
2013-05-06 20:38:25 +10:00
Corvus Corax
e0a6dae46a
made "fake" variances set in indoor mode and used for airspeed hack come from UAvObject
2013-05-05 18:19:43 +02:00
Corvus Corax
946105cbe3
Merge branch 'next' into corvuscorax/Attitude-fixes
2013-05-05 17:44:59 +02:00
Alessio Morale
1e5ce7a5fb
OP-938 Add programmable EXP and max full throttle climb/descent rate
2013-05-04 18:50:19 +02:00
Corvus Corax
25c58ff074
Put all EKF initialisation values in a separate UAVObject EKFConfiguration,
...
adapted insgps13state.c/.h,
modules/Attitude/revolution,
configrevowidget.cpp,
accordingly.
2013-05-03 02:17:44 +02:00
Sambas
f65fbd7c8a
Revert revo flight modes
2013-05-02 13:38:44 +03:00
Sambas
f7b9223827
Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext
...
Conflicts:
flight/modules/System/systemmod.c
shared/uavobjectdefinition/taskinfo.xml
2013-05-02 09:00:12 +03:00
Corvus Corax
e7dc665c14
Reworked Variance Objects, Setting for initial EKF variance
2013-05-01 19:16:29 +02:00
Corvus Corax
d77c690fe3
Merge branch 'next' into corvuscorax/Attitude-fixes
...
Conflicts:
flight/modules/Attitude/revolution/attitude.c
2013-05-01 17:51:05 +02:00
Corvus Corax
a0ca66b0cd
Merge branch 'corvuscorax/delayed_callbacks_with_delay' into next
2013-05-01 15:34:16 +02:00
David Ankers
c2456e4a10
Change Yaw back to 300
2013-04-30 13:53:34 +10:00
Corvus Corax
c06f049e2a
adjusted initial variances and defaults to be closer to the original values to reduce possibly negative impacts of the previous changesets
2013-04-28 21:17:51 +02:00
Corvus Corax
6e2c9b3c46
New EKFStateVariance UAVObject with EKF state variance information
2013-04-28 19:38:37 +02:00
Corvus Corax
63c4dc1ff0
Expose gyro bias process variance to settings UAVObject, code cleanup in revolution/attitude to make it more readable
2013-04-28 14:46:27 +02:00
sambas
38d9d5dde3
Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext
...
Conflicts:
flight/modules/VtolPathFollower/vtolpathfollower.c
2013-04-28 09:46:14 +03:00
Corvus Corax
a817558264
changed default variances for EKF to more sensible values
2013-04-28 01:25:11 +02:00
David Ankers
bd62c3313d
Chnage maxrate for Yaw to be more acceptable, still, these are only for
...
testing, I am cheating instead of makeing a branch
2013-04-28 03:17:36 +10:00
Corvus Corax
e1233c7780
Merge branch 'next' into corvuscorax/delayed_callbacks_with_delay
...
Conflicts:
flight/targets/Revolution/System/inc/openpilot.h
flight/targets/SimPosix/System/inc/openpilot.h
flight/targets/boards/coptercontrol/firmware/inc/openpilot.h
flight/targets/boards/oplinkmini/firmware/inc/openpilot.h
flight/targets/boards/revolution/firmware/inc/openpilot.h
flight/targets/boards/revoproto/firmware/inc/openpilot.h
2013-04-27 13:26:03 +02:00
sambas
9fec3f5567
Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext
2013-04-27 13:39:58 +03:00
David Ankers
5fa40ac65a
Changed yaw back
2013-04-27 17:20:36 +10:00
David Ankers
31bf1f4d27
Just for testing, might need to be backed out, easier to put it here for
...
now so it gets dragged in with test builds.
2013-04-27 12:19:50 +10:00
sambas
abe3742217
Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext
...
Conflicts:
flight/Libraries/CoordinateConversions.c
flight/Libraries/paths.c
flight/Modules/System/systemmod.c
flight/PiOS/STM32F4xx/pios_sys.c
flight/targets/boards/coptercontrol/pios_board.h
flight/targets/boards/revolution/pios_board.h
flight/targets/boards/revoproto/pios_board.h
2013-04-25 17:26:49 +03:00
Oleg Semyonov
f9f721a76a
Reset executable bits from non-executable files (Windows legacy)
2013-04-24 01:18:46 +03:00
sambas
731ee3e19d
Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
2013-04-22 21:29:04 +03:00
Oleg Semyonov
927e952a9d
Merge remote-tracking branch 'origin/os/OP-897_hide-unsupported-modes' into next
2013-04-20 21:23:00 +02:00
sambas
01df38008f
Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext
...
Conflicts:
flight/Libraries/sanitycheck.c
flight/Modules/System/systemmod.c
2013-04-20 21:25:22 +03:00
Oleg Semyonov
220b4b5042
OP-886: use enum for extended alarm status field
...
See also:
http://reviews.openpilot.org/cru/OPReview-430
http://progress.openpilot.org/browse/OP-915
2013-04-20 02:10:40 +03:00
Oleg Semyonov
cb068f507b
Merge remote-tracking branch 'origin/next' into amorale/OP-886_sanitychecks
2013-04-19 23:43:42 +02:00
Oleg Semyonov
72a2d1a50e
style: use 2 spaces and full stop for UAVO comments (as used in other objects)
...
+review OPReview-430
2013-04-19 18:47:56 +03:00
sambas
6989468d17
Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext
...
Conflicts:
.gitignore
2013-04-14 10:13:51 +03:00
Corvus Corax
87ed9a8be2
reimplemented delayed callback scheduler to allow dispatching from ISR's and multiple schedulers with different task priorities
2013-04-14 04:16:34 +02:00
Corvus Corax
bbb83752f7
rebased delayed callback scheduler
2013-04-13 21:50:47 +02:00
Brian Webb
28bfc2725c
Merge remote-tracking branch 'origin/next' into brian/rfm22_FHSS
2013-04-11 14:42:49 +01:00
Oleg Semyonov
2d9a2ef712
OP-897: fix formatting +review OPReview-438
2013-04-09 01:11:02 +03:00
sambas
fb8273459f
Normalize line endings
2013-04-07 09:49:13 +03:00
Oleg Semyonov
f260b2f568
OP-897: remove non-user-selectable modes from GCS dropdown lists
...
Now all unsupported options are disabled. They will be reenabled when
ready for end users. Still developers can set them using UAVObjBrowser.
As a side effect, a bit changed UAVO XML definitions. The "limits"
option now uses comma to separate rules, semicolon to separate elements.
Was vice versa.
OP-897 #resolve #comment Pushed for review
+review OPReview
2013-04-06 19:01:12 +03:00
Brian Webb
948038f655
Merge remote-tracking branch 'origin/next' into brian/rfm22_FHSS
2013-04-06 01:32:36 +01:00
Brian Webb
c330db3a28
Added setting of min/max frequencies on OPLink coordinator.
2013-04-06 01:32:15 +01:00
Oleg Semyonov
5bb6b56b4a
OP-772: Normalize line endings
2013-04-05 23:46:56 +03:00
Oleg Semyonov
cd155dd349
FlightBatteryState.xml: add missing space
2013-04-05 12:44:05 +03:00
Alessio Morale
45b0e787a4
OP-886 Improvements to sanitychecks
...
Added an Extensions to Alarm for detailed status/substatus reporting.
Extended Alarms are the first in the Alarm structure and have corresponding fields in Status and Substatus structures.
Also added a filter to the HWsettings update to prevent to block arming when actual settings have not changed.
+review OPReview
2013-03-30 19:57:16 +01:00
sambas
5ded8c6dfc
VTOL path fixes
...
Flight mode fixes
POI mode
AutoLand Tests
Simple stabilization Shortest way yaw fix
GCS map and pathplanner fixes
2013-03-28 18:29:26 +02:00
sambas
77cae9ffc3
MagBaro Extension board module
...
OSD update
OSD output module for FC
Sonar update
Flight mode fixes + poi
2013-03-28 18:20:50 +02:00
Brian Webb
1979e8b57f
Merge remote-tracking branch 'origin/next' into brian/rfm22_FHSS
2013-03-24 16:57:59 +01:00
Brian Webb
2b6345850b
Merge remote-tracking branch 'origin/next' into brian/rfm22_FHSS
2013-03-24 00:58:41 +01:00
Alessio Morale
8d56b9347b
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2013-03-23 15:33:18 +01:00
Alessio Morale
e06ab7f706
Merge remote-tracking branch 'origin/amorale/01-directory_move_sanity_simposix' into next
...
Conflicts:
Makefile
flight/PiOS.posix/inc/pios_com.h
flight/targets/RevoMini/UAVObjects.inc
flight/targets/Revolution/Makefile
2013-03-23 14:37:19 +01:00
David Ankers
5d3cc203a2
Merge branch 'dankers/silk_add' into next
2013-03-24 00:16:51 +11:00