Brian Webb
6ed9b63da9
RFM22B: Changing configuration parameters over-the-air working. Added tracking of Tx/Rx sequence number. Still seeing too many resent packets.
2012-12-11 17:44:11 -07:00
Brian Webb
7aaa02268f
RFM22B: Added TX Resent to OPLink status. Also removed the need for the packet queue.
2012-12-11 17:44:08 -07:00
Brian Webb
bd42083376
RFM22B: Changed the way the frequencies and power settings are set for the rfm22b device.
2012-12-11 17:43:55 -07:00
Brian Webb
dae382564a
RFM22B/RM: Added rfm22b com device, moved remaining functionality in the radio module to the rfm22 driver, and simplified configuration of the PipX/OPLink. The radio device now presents itself completely as a com device, both in RadioComBridge (OPLink devices) and Telemetry (RM). Also change the PipXStatus and PipXSettings UAVOs to OPLinkStatus/OPLinkSettings.
2012-12-11 17:43:53 -07:00
Brian Webb
4b90f81f6f
RFM22B: Modified the method of tracking RX errors, and now reporting Good, Corrected, Error, and Missed packets to the GCS. Also removed some less useful fields from the PipXStatus.
2012-12-11 17:43:49 -07:00
Oleg Semyonov
41d56b282e
[OP-724] Remove LPF from throttle input channel (not necessary)
2012-12-02 13:50:03 +02:00
Oleg Semyonov
cc98962c36
[OP-724] Provide generic gimbal type
2012-11-29 18:03:05 +02:00
Oleg Semyonov
8adc2abd77
[OP-724] Now most camera options can be set independently per each axis.
2012-11-29 17:39:10 +02:00
Oleg Semyonov
5784ea8b36
[OP-724] Provide Actuator option to disable selected channels and use it for 7s camera boot delay
...
Actuator did not provide an option to completely shutdown selected channels
(set PWM pulse = 0). It is useful for camera stabilization boot delay (we
want few seconds of gimbal servo inactivity to calibrate gyros). It also
might be useful for failsafe on some channels. This option is now available.
It is used to disable camera outputs during fixed 7s delay after boot
instead of setting them to minimum position.
As a side effect, few bugs are fixed (ticks should be multiplied by
portTICK_RATE_MS, not divided, to get time in ms). And few floating point
operations were optimized out as well.
ActuatorCommand.UpdateTime was promoted to uint16 because it is not unusual
to have it 20000ms during flash updates (was seen on the CC after UAV
settings import). So it should be 16bit as well.
2012-11-29 17:39:09 +02:00
Oleg Semyonov
8f5fb5aeb0
[OP-724] Add camera gimbal filtering and feed forward options
...
This is a partial rework of Cossacs' camera gimbal software.
This patch adds LPF to airframe attitude used for camera stabilisation
and feed forward for camera actuators. Either of options can be
disabled on the compilation level to save flash and RAM if not
required.
Original Cossacs' code was optimized and code flow shortcuts were
added where applicable.
2012-11-29 17:39:08 +02:00
Oleg Semyonov
ee333f1569
[OP-724] Add manual control input filtering (useful for camera gimbal)
...
This is a partial rework of Cossacs' camera gimbal software.
This patch adds LPF to some of manual control inputs. Mostly
useful are accessory channels (for camera gimbal control) and
yaw channel (for smooth filming). The code may be used for
stand-alone CC[3D]-based gimbal software, but also should work
for complete FC+camera system.
2012-11-29 17:39:07 +02:00
Oleg Semyonov
ea1199603b
Merge remote-tracking branch 'origin/rel-12.10.2' into next
...
Conflicts:
MILESTONES.txt
2012-11-29 17:31:50 +02:00
Erik Gustavsson
5e14f5352f
Minor codestyle/whitespace cleanup
2012-11-29 00:03:38 +02:00
Erik Gustavsson
dc5394dcf3
Add setting to suppress axis output from Stabilization module until armed and throttle is applied. Useful to keep the tail prop out of the grass while arming a tri.
2012-11-29 00:03:37 +02:00
Corvus Corax
7059d4f032
changed some details as to dschin's suggestions
2012-11-22 13:26:45 +01:00
Corvus Corax
264f631df6
Merge branch 'corvuscorax/baro_fixes' into revo-fixes
2012-11-22 11:51:36 +01:00
Corvus Corax
2e9ec6810b
OP-699 fix buggy default in fixedwingpathfollowersettings - is being refactored anyway
2012-11-22 11:33:01 +01:00
Corvus Corax
4f601eafe7
OP-736 remove unsupported failsafe type from manualcontrolsettings. should only be readded once supported for safety reasons!
2012-11-22 11:22:07 +01:00
Corvus Corax
34210ef9ae
Merge branch 'corvuscorax/OP699' into revo-fixes
2012-11-22 10:57:11 +01:00
Corvus Corax
39154e083d
OP-734 - fix update mode in PathStatus
2012-11-22 10:47:20 +01:00
Oleg Semyonov
79f95983da
Merge remote-tracking branch 'origin/rel-12.10.2' into next
2012-11-14 17:26:18 +02:00
Erik Gustavsson
e186101fe7
Change default AccelTau value to zero (filter disabled)
2012-11-11 21:16:48 +01:00
Corvus Corax
e9da78406a
Merge branch 'corvuscorax/baro_fixes' into corvuscorax/airspeed_fixes
2012-11-08 09:48:01 +01:00
Corvus Corax
b09027afe5
Completely refactored airspeed module, now a pure sensor input module without any complex sensor fusion features -- changed driver for mpxv analog airspeed to be more versatile
2012-11-08 01:31:21 +01:00
Corvus Corax
5981d9acd6
removed surplus NEDposition uavobject
2012-11-06 10:13:09 +01:00
Corvus Corax
e8232ba825
Pathplanner: removed pathPlannersettings and preprogrammed (hardcoded) paths
2012-11-05 16:04:45 +01:00
Corvus Corax
3f248915cb
Merge remote-tracking branch 'origin/revo-next' into corvuscorax/airspeed_fixes
2012-11-03 20:03:18 +01:00
Stacey Sheldon
9d1825f8a8
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
shared/uavobjectdefinition/groundtruth.xml
2012-11-01 23:23:33 -04:00
Sambas
949b17baae
this made GCS tx rate go over 3000
2012-10-31 20:59:40 -04:00
Sambas
32e3f2e631
this made GCS tx rate go over 3000
2012-10-31 21:15:39 +02:00
Erik Gustavsson
c207afbfef
Implement smoothing filter for accelerometer data.
2012-10-31 19:05:59 +01:00
Stacey Sheldon
5aa3777078
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
flight/Modules/Telemetry/telemetry.c
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-10-30 00:41:35 -04:00
Stacey Sheldon
2119067722
Merge remote-tracking branch 'op-revo/james/revo' into revo-next
...
Conflicts:
Makefile
flight/Modules/Attitude/revolution/attitude.c
flight/Modules/Battery/battery.c
flight/Modules/FixedWingPathFollower/fixedwingpathfollower.c
flight/Modules/GPS/GPS.c
flight/Modules/ManualControl/inc/manualcontrol.h
flight/Modules/ManualControl/manualcontrol.c
flight/Modules/OveroSync/overosync.c
flight/Modules/PathPlanner/inc/pathplanner.h
flight/Modules/PathPlanner/pathplanner.c
flight/Modules/Sensors/sensors.c
flight/Modules/VtolPathFollower/vtolpathfollower.c
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/Boards/pios_board.h
flight/PiOS/STM32F4xx/library.mk
flight/PiOS/inc/pios_hmc5883.h
flight/PiOS/inc/pios_l3gd20.h
flight/PiOS/inc/pios_rfm22b_priv.h
flight/Revolution/Makefile
flight/Revolution/Makefile.osx
flight/Revolution/System/inc/pios_config.h
flight/Revolution/UAVObjects.inc
ground/openpilotgcs/src/libs/utils/coordinateconversions.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.h
ground/openpilotgcs/src/plugins/config/configrevowidget.cpp
ground/openpilotgcs/src/plugins/hitlnew/il2simulator.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/plugins.pro
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
package/Makefile
shared/uavobjectdefinition/fixedwingpathfollowersettings.xml
shared/uavobjectdefinition/fixedwingpathfollowerstatus.xml
shared/uavobjectdefinition/flightstatus.xml
shared/uavobjectdefinition/hwsettings.xml
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/pathdesired.xml
shared/uavobjectdefinition/vtolpathfollowersettings.xml
shared/uavobjectdefinition/waypoint.xml
2012-10-30 00:08:43 -04:00
Corvus Corax
6409dfb2df
Further cleanup in PathFollower. Should now be safe to fly again
2012-10-28 21:49:22 +01:00
Stacey Sheldon
bc3a90c6a9
Merge branch 'one-way-telemetry' into next
2012-10-25 22:48:43 -04:00
James Cotton
68ae9f52c9
SystemAlarms: Convert to the newer way of listing elements to help merges and added SystemConfiguration
2012-10-25 12:31:26 -05:00
Laura Sebesta
5e785d4524
Added body-frame acceleration to ground truth UAVO and to flight simulator output.
...
Conflicts:
shared/uavobjectdefinition/groundtruth.xml
2012-10-23 11:50:00 +02:00
Laura Sebesta
433d723251
Added groundtruth simulation support.
...
This new UAVO serves principally to log data for future comparison with
onboard estimation techniques.
Conflicts:
ground/openpilotgcs/src/plugins/hitl/il2simulator.cpp
ground/openpilotgcs/src/plugins/hitl/simulator.h
2012-10-23 11:47:58 +02:00
Kenz Dale
1ab1ea5899
Save ~150 bytes by moving GPSDataProtocol to SystemSettings.
...
All credit to Anstron.
2012-10-22 16:47:22 +02:00
Stacey Sheldon
4892fdb33d
telemetry: allow telemetry to flow when not connected to GCS
...
Previously, when unconnected, only the flighttelemetrystats
UAVO was Tx'd. All other UAVOs were inhibited. This led to
zero telemetry data when the connection to the GCS was gone.
This precluded getting useful telemetry from a receive-only
station.
This commit changes two main areas.
First, UAVO updates are now allowed regardless of the "connected"
state between the GCS/FC.
Second, it makes both the flighttelemetrystats and gcstelemetrystats
UAVOs un-acked. This prevents these objects from blocking all
other UAVOs while they wait for their ack. This is OK since the
real "connection" negotiation happens via the states exchanged in
the Status field of these UAVOs.
2012-10-21 22:51:17 -04:00
Stacey Sheldon
127ca1e7e1
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
ground/openpilotgcs/src/plugins/hitl/plugin.pro
ground/openpilotgcs/src/plugins/hitlnew/fgsimulator.cpp
ground/openpilotgcs/src/plugins/hitlnew/hitlconfiguration.cpp
ground/openpilotgcs/src/plugins/hitlnew/hitloptionspage.cpp
ground/openpilotgcs/src/plugins/hitlnew/hitloptionspage.ui
ground/openpilotgcs/src/plugins/hitlnew/il2simulator.cpp
ground/openpilotgcs/src/plugins/hitlnew/simulator.cpp
ground/openpilotgcs/src/plugins/hitlnew/simulator.h
ground/openpilotgcs/src/plugins/hitlnew/xplanesimulator.cpp
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-10-20 13:56:18 -04:00
James Cotton
96afe7cffd
Merge remote-tracking branch 'origin/stac/add-debug-consoles' into next
2012-10-12 08:07:44 -05:00
Stacey Sheldon
f0e0c2e79e
console: add debug console via USB CDC/VCP interface
...
The USB VCP Port has a new DebugConsole setting that
routes all output destined for PIOS_COM_DEBUG to the
emulated serial port.
To enable this in your build, you'll have to build like:
- make fw_coptercontrol_clean
- make fw_coptercontrol ENABLE_DEBUG_CONSOLE=YES
You can then output formatted text to the console
like this:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
PIOS_COM_SendFormattedString(PIOS_COM_DEBUG,
"foo is %u\r\n",
foo);
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
Please ensure that all of your debug output is
wrapped with these macros so that your debug
code doesn't bloat the firmware image.
2012-10-11 00:51:09 -04:00
Stacey Sheldon
6088c05946
console: add support for serial debug consoles
...
Serial ports now have a new HW setting called DebugConsole
which can be used to dump internal state to a serial port
for debug.
To enable this feature, you need to:
- make fw_coptercontrol_clean
- make fw_coptercontrol ENABLE_DEBUG_CONSOLE=YES
- configure one of the serial ports as DebugConsole in the GCS
- save settings
- power-cycle your board
Things to note:
- The console is at 57600,8N1.
- This is not currently configurable via the GCS.
- You can only have a single console enabled at a time.
2012-10-11 00:22:07 -04:00
Laura Sebesta
c2b49b6ef3
Merge branch 'kenz/cc_hitl_merge' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/gcscontrol/gcscontrolgadgetoptionspage.ui
ground/openpilotgcs/src/plugins/hitlnew/hitloptionspage.ui
ground/openpilotgcs/src/plugins/hitlv2/hitlv2optionspage.ui
2012-10-08 15:30:27 +02:00
James Cotton
2191befe17
Merge remote-tracking branch 'revo/brian/rfm22_rf2' into revo
...
Conflicts:
flight/PiOS/Common/pios_rfm22b.c
2012-10-05 08:20:35 -05:00
Brian Webb
5724fa083c
RFM22B: Added link quality calculation based on number of dropped packets. Also added packet error correction, which apparently wasn't being done before.
2012-10-04 21:11:40 -07:00
James Cotton
193fdcd9a2
Make the default PipX RF power 1.25 mW to avoid damanging anything when there is no antenna
2012-10-04 16:41:02 -05:00
Stacey Sheldon
2f4b1e69dd
rcvr: Support PPM and PWM at the same time on CC
...
Adds a new mode for the receiver port (PPM+PWM) which
will allow simultaneous use of 1 pin for PPM and the
rest of the pins for PWM inputs.
2012-09-29 19:11:48 -04:00
Stacey Sheldon
9896a0d416
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
ground/openpilotgcs/src/libs/utils/homelocationutil.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.h
ground/openpilotgcs/src/plugins/uavobjectutil/uavobjectutilmanager.cpp
shared/uavobjectdefinition/taskinfo.xml
2012-09-27 22:42:44 -04:00
James Cotton
6e114360f4
Merge branch 'next' into revo
...
Conflicts:
shared/uavobjectdefinition/taskinfo.xml
2012-09-27 14:04:44 -05:00
James Cotton
684620dce6
Merge remote-tracking branch 'origin/hyper/uavobjectparser-tweaks' into next
...
Conflicts:
shared/uavobjectdefinition/taskinfo.xml
2012-09-27 13:49:34 -05:00
James Cotton
0fa4b062a4
Merge branch 'next' into revo
2012-09-26 00:43:02 -05:00
PT_Dreamer
43f85d9617
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2012-09-25 10:44:32 +01:00
PT_Dreamer
3d5381893b
GCS-Changed relaytuning uavo to gcs readOnly
2012-09-24 22:47:18 +01:00
PT_Dreamer
fb073059ad
GCS-Use uavo definition hash to check for compatability
...
Unfortunately had to change the iap object.
2012-09-17 17:08:15 +01:00
Stacey Sheldon
754f58c33a
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
flight/Modules/ManualControl/inc/manualcontrol.h
flight/Revolution/Makefile.osx
ground/openpilotgcs/src/plugins/plugins.pro
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
ground/openpilotgcs/src/plugins/uploader/uploadergadgetwidget.cpp
shared/uavobjectdefinition/flightstatus.xml
shared/uavobjectdefinition/hwsettings.xml
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-16 09:56:35 -04:00
Stacey Sheldon
c5fda86e96
Merge branch 'next-merge' into revo-next
2012-09-15 21:47:32 -04:00
Stacey Sheldon
9a5ba841cf
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
ground/openpilotgcs/src/libs/utils/coordinateconversions.cpp
ground/openpilotgcs/src/plugins/hitlnew/il2simulator.cpp
ground/openpilotgcs/src/plugins/hitlnew/xplanesimulator.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.h
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/pathaction.xml
shared/uavobjectdefinition/waypointactive.xml
2012-09-15 19:55:47 -04:00
a*morale
af9a3baffd
Added the 5&6th banks on ChannelUpdateFreq
2012-09-15 00:38:38 +02:00
James Cotton
13e7733e5f
Merge branch 'revo-mini' into revo
2012-09-12 02:30:10 -05:00
James Cotton
223a3473c2
Merge branch 'next' into revo-mini
2012-09-12 02:03:39 -05:00
James Cotton
11b099b1ef
Stabilization: Add configuration terms for the derivative calculation to the UAVO and pass
...
them in to the PID system.
2012-09-11 12:29:38 -05:00
a*morale
cf7aea6499
Support for Led Outputs as actuator channels 9&10.
...
Added the ARMING LED and INFO LED option for actuator channel
2012-09-10 20:14:24 -05:00
James Cotton
38e9d105aa
Merge branch 'pidt1' into test2
...
Conflicts:
flight/Modules/ManualControl/inc/manualcontrol.h
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/flightstatus.xml
shared/uavobjectdefinition/hwsettings.xml
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-10 14:37:52 -05:00
James Cotton
4d87af38b6
Make sure the orders of the UAVOs match
2012-09-10 10:52:05 -05:00
Richard Flay (Hyper)
53e2db3b24
Added a backwards-compatible way to specify UAVO field element names and options as lists of child elements of the field element. Added the ability to specify that a field is a clone of another field, just with a different name
2012-09-08 14:41:55 +09:30
James Cotton
2f65fc1e8e
Merge branch 'next' into relay_tuning
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-04 10:43:04 -05:00
James Cotton
c9f66f5145
Merge branch 'revo' into revo-mini
...
Conflicts:
androidgcs/AndroidManifest.xml
androidgcs/res/layout/gcs_home.xml
androidgcs/res/values/strings.xml
androidgcs/src/org/openpilot/androidgcs/AttitudeView.java
androidgcs/src/org/openpilot/androidgcs/HomePage.java
flight/PipXtreme/System/pios_board.c
ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
shared/uavobjectdefinition/taskinfo.xml
2012-09-01 16:57:27 -05:00
James Cotton
6bfb2a5e45
Merge branch 'next' into revo
...
Conflicts:
ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/mapgraphicitem.cpp
ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/mapripper.cpp
ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/waypointitem.cpp
ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/waypointitem.h
ground/openpilotgcs/src/libs/utils/coordinateconversions.cpp
ground/openpilotgcs/src/libs/utils/coordinateconversions.h
ground/openpilotgcs/src/plugins/opmap/opmap.pro
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.h
ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
shared/uavobjectdefinition/taskinfo.xml
shared/uavobjectdefinition/waypoint.xml
2012-09-01 16:18:03 -05:00
James Cotton
f3327e3993
RM: Enabled optional modules and got the battery module working again.
...
Changed the hardcoded (ick) battery lines for RM. Also removed the reference
to PIOS_ADC_GetPin(4) as that pin is no longer available. Finally
changed the default FlightBatterySettings to work out of the box
for the standard recommended sensors.
2012-09-01 11:03:32 -05:00
Kenz Dale
e123a88262
Added UAVO for airspeeds.
2012-08-29 16:04:47 +02:00
James Cotton
b08775666b
Disable the telemetry port by default
2012-08-25 22:12:41 -05:00
David Ankers
69cd7235d3
Change Default GPS protocol to UBX
2012-08-25 19:16:16 -05:00
James Cotton
a7b5fcd77c
Monitor the radio threads
2012-08-25 18:48:30 -05:00
Brian Webb
415b86879c
Added the RFM22B driver to the Revo to support an RFM22B radio on the external SPI port.
2012-08-25 11:45:43 -07:00
James Cotton
8d70a632fe
Autotune: Increase the default step size for autotuning.
2012-08-24 23:06:41 -05:00
Brian Webb
b1c88628f6
Merge branch 'james/revo' of ssh://git.openpilot.org/revo into brian/revo_link
2012-08-24 19:35:40 -07:00
James Cotton
a3f1894cd7
Autotuning: Make the estimator require the value to toggle above and below the hysteresis level.
2012-08-24 21:33:08 -05:00
Brian Webb
76907fe8f1
Changed PipXStatus UAVO to update 1 / second.
2012-08-23 07:02:51 -07:00
David Ankers
2f168323d2
Default to telem on main port, no reasons against this unless I am being
...
stupid (very possible).
2012-08-22 07:12:47 +10:00
David Ankers
8d5c1e4253
Change Default GPS protocol to UBX
2012-08-22 05:11:28 +10:00
PT_Dreamer
fa465c54a8
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/input.ui
2012-08-21 14:46:16 +01:00
Stacey Sheldon
1f1b240b2a
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-08-20 21:22:02 -04:00
James Cotton
44dc01126e
Merge branch 'next' into revo
2012-08-12 16:12:54 -05:00
James Cotton
5e61f66fc0
Messed up merge on manualcontrol settings
2012-08-12 14:44:54 -05:00
James Cotton
75db0fcb35
Merge branch 'next' into revo
...
Conflicts:
flight/Modules/GPS/GPS.c
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/systemalarms.xml
2012-08-12 14:38:38 -05:00
Stacey Sheldon
63c167c183
taskinfo: also track Event thread's stack usage and CPU utilization
...
The event dispatcher thread is started differently than most other
threads so it was missed in the taskinfo tracking information. Now
it's also included.
2012-08-11 18:47:03 -04:00
Stacey Sheldon
b505602c15
Merge remote-tracking branch 'origin/stac/rc-tx-joystick-emulation' into next
2012-08-11 11:21:18 -04:00
James Cotton
7cca5696a2
Merge remote-tracking branch 'origin/pt/boardbased_ui_limits' into next
2012-08-08 14:11:24 -05:00
James Cotton
06a6e367b0
Merge remote-tracking branch 'origin/hyper/OP-661' into next
2012-08-08 13:49:48 -05:00
Stacey Sheldon
ef0c12b1b6
hid joystick: emulate a USB HID joystick using RC Transmitter
...
Adds a new RCTransmitter setting for the USB HID interface which
emulates a USB HID joystick. The scaled RC receiver channels
from any RCVR protocol are passed through to the various emulated
joystick controls.
The main use for this feature is to allow you to use your own RC
transmitter with any RC simulator on a PC.
This is known to work with CRRCsim but should work with any simulator
that supports joystick input.
2012-08-05 21:45:27 -04:00
PT_Dreamer
df61d33f66
GCS- Added the ability to have more than 1 ui limit per index
2012-08-03 18:57:24 +01:00
James Cotton
ccbbda1b51
Make default tuning mode Attitude to make it easier on people like me :)
2012-08-03 12:41:00 -05:00
PT_Dreamer
4d19062059
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into pt/boardbased_ui_limits
2012-08-03 18:14:51 +01:00
James Cotton
652647fc87
Make autotuning module optional
2012-08-03 09:37:46 -05:00
James Cotton
2ccd6605a4
Now the stabilization refactor is in we can make swapping between tuning the
...
system in rate or attitude mode software configurable.
2012-08-03 09:37:45 -05:00
James Cotton
28539a80d1
Change default tuning settings
2012-08-03 09:37:45 -05:00
James Cotton
7ea14ecc22
Track the output gain instead of amplitude so the measured values are
...
consistent if the settings are changed afterwards.
2012-08-03 09:37:45 -05:00
James Cotton
5c00451c9e
Remove unused value field from the relaytuning object
2012-08-03 09:37:45 -05:00
James Cotton
52ffec0be4
Increase the initial tuning amplitude to 0.15
2012-08-03 09:37:45 -05:00
James Cotton
dfd1aceb06
More work on autotune from GCS
2012-08-03 09:37:45 -05:00
James Cotton
a9af53b4f3
Create new autotuning module which rotates through the axes for autotuning and
...
then computes new stabilization settings.
2012-08-03 09:37:44 -05:00
James Cotton
4ac8df6aa8
Make the system perform an online estimate of the period and amplitude of the
...
oscillation during relay tuning
2012-08-03 09:37:44 -05:00
James Cotton
17a0d3ebb4
Add a relay stabilization mode
2012-08-03 09:37:44 -05:00
James Cotton
9ce7d9b4ac
Add UAVOs for relay tuning
2012-08-03 09:37:44 -05:00
James Cotton
6948f1dc41
Merge remote-tracking branch 'origin/master' into next
...
Conflicts:
package/winx86/translations/strings_de.nsh
2012-08-03 09:35:18 -05:00
PT_Dreamer
205d370eec
GCS-Made the UI limits board specific
2012-08-02 16:34:48 +01:00
Richard Flay (Hyper)
56647f5409
Fix for OP-661: error messages in GCS log due to obsolete AHRSComms and SDCard related alarms. Change also disables obsolete SDCard support on the flight side of CC and PipX
2012-07-31 11:07:07 +09:30
James Cotton
9d82538a09
If we set FirmwareIAPObj to update on change then initial object retrieval will
...
force it to be fetched before emitting the autopilotConnected signal.
2012-07-27 16:16:16 -05:00
James Cotton
c587ceebfd
Make the mag offset nulling convergence rate come from the UAVO. When it is
...
set to zero nulling does not occur to allow us to still calibrate the sensors.
2012-07-25 11:23:27 -05:00
James Cotton
d1e6dcc2f0
First pass implementation of William Premerlani's magnetometer bias correction
2012-07-25 11:07:40 -05:00
Kenz Dale
aa5e5a9b01
Removed "airspeed" field from Airspeed UAVO. Now everything is done either with true airspeed or calibrated airspeed
2012-07-24 15:15:21 +02:00
Stacey Sheldon
f5db83bd20
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
flight/Libraries/inc/NMEA.h
flight/Modules/GPS/GPS.c
flight/Modules/GPS/NMEA.c
flight/Modules/GPS/UBX.c
flight/Modules/GPS/inc/NMEA.h
flight/Modules/GPS/inc/UBX.h
flight/Modules/PathPlanner/inc/pathplanner.h
flight/PiOS/STM32F10x/link_STM32103CB_PIPXTREME_sections.ld
flight/Revolution/System/inc/pios_config.h
flight/Revolution/UAVObjects.inc
flight/SimPosix/UAVObjects.inc
ground/openpilotgcs/src/plugins/hitlv2/aerosimrc/src/qdebughandler.h
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/gpsvelocity.xml
2012-07-22 23:39:37 -04:00
James Cotton
93faf131b0
Merge branch 'next' into revo
...
Conflicts:
flight/Modules/GPS/GPS.c
flight/Modules/GPS/NMEA.c
flight/Modules/GPS/UBX.c
flight/Modules/GPS/inc/NMEA.h
flight/Modules/GPS/inc/UBX.h
flight/Revolution/System/inc/pios_config.h
flight/Revolution/UAVObjects.inc
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
ground/openpilotgcs/src/plugins/waypointeditor/waypointeditorplugin.h
shared/uavobjectdefinition/gpsvelocity.xml
2012-07-22 00:43:19 -05:00
James Cotton
5649813c2b
Make sure to always compare BiasCorrectedRaw against its enum. Also reversed
...
the order of TRUE,FALSE in the definition to make it safer anyway.
2012-07-21 17:24:58 -05:00
Stacey Sheldon
eafd525323
Merge remote-tracking branch 'origin/D-Lite/ubx-parser-next' into next
2012-07-21 14:22:10 -04:00
Kenz Dale
1d976b3095
dded support for multiple airspeed sources. Added GPS airspeed estimation. Extended BaroAirspeed UAVO. Added new AirspeedSettings UAVO.
2012-07-20 13:08:54 +02:00
Werner Backes
b6ebee403d
Removed reference to AHRSCommsModule
2012-07-19 20:48:35 +02:00
James Cotton
7492d34d25
Merge branch 'overo_control' into revo
2012-07-19 08:35:39 -05:00
James Cotton
4306afa841
Update the module and overosyncstats to track buffer underruns
2012-07-17 17:21:51 -05:00
James Cotton
9c91436428
Clean up some cruft from Overo module and add a packet counter
2012-07-17 16:17:56 -05:00
James Cotton
bc075c5d2c
Only schedule overo packets on the NSS line rising to avoid the frame sync
...
errors we were seeing previously
2012-07-17 11:45:45 -05:00
James Cotton
6b101d71af
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo
2012-07-15 12:32:35 -05:00
James Cotton
7bddf2a988
Correct default value for overo sync settings
2012-07-14 17:38:49 -05:00
James Cotton
5f337afb36
Add a setting to determine when the overo module logs
2012-07-14 09:21:38 -05:00
James Cotton
9eee4f1bc7
Made OverSynce an optional module.
...
Conflicts:
shared/uavobjectdefinition/hwsettings.xml
2012-07-14 09:07:22 -05:00
James Cotton
d150fd5331
Merge branch 'next' into revo
...
Conflicts:
flight/Modules/ManualControl/manualcontrol.c
ground/openpilotgcs/src/plugins/config/input.ui
ground/openpilotgcs/src/plugins/uavtalk/telemetry.cpp
shared/uavobjectdefinition/manualcontrolsettings.xml
2012-07-13 10:40:14 -05:00
Brian Webb
3fabdb9963
Fixed conflicted merge with origin/next.
2012-07-11 19:25:05 -07:00
Werner Backes
0a7fa8dc5f
Revert "Removed ECEF and RNE flields to be compatible with Revo"
...
This reverts commit feb063dda7
.
2012-07-10 23:06:42 +02:00
Werner Backes
feb063dda7
Removed ECEF and RNE flields to be compatible with Revo
2012-07-10 16:40:58 +02:00
Werner Backes
19a9cd03c2
Introduced GPSVelocity UAVObject
...
Conflicts:
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-07-10 16:23:10 +02:00
Werner Backes
94b610c882
Added missing gpssettings.xml
2012-07-10 11:01:42 +02:00
PT_Dreamer
f6e4318c2a
GCS- Don't add category to object definition yet.
2012-07-09 15:21:20 +01:00
PT_Dreamer
58a9e9a6f7
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2012-07-09 15:07:47 +01:00
Stacey Sheldon
54a161a3d4
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
2012-07-08 18:14:09 -04:00
Laura Sebesta
cfb8e72679
Improved battery module to fully support regeneration. Fixed bug in builtin battery module. Improved ADC routing names.
2012-07-08 23:13:05 +02:00
Laura Sebesta
a98991d8a1
Created ADC routing UAVO. This allows to direct ADC inputs to various modules.
...
Tested and works on FlightBattery, currently the only module using the ADC.
2012-07-08 13:16:05 +02:00
Stacey Sheldon
8651132b5a
systemsettings: default airframe is now QuadX
2012-07-07 15:42:31 -04:00
Laura Sebesta
54f3fbf226
Made OverSynce an optional module.
2012-07-07 11:53:58 +02:00
Brian Webb
10e52b31c5
Added the ability on the PipX to specify if a comport is used to connect to the GCS (ground side), so it will receive status, etc, or UAVTalk (flight side). The data passing in RadioComBridge was also made more uniform, which allows for easier reconfiguration.
2012-06-30 10:06:28 -07:00
James Cotton
04e784edc7
Make pathdesired update on change with throttling to avoid slamming telemetry
...
in position hold mode.
2012-06-26 11:57:11 +03:00
Oleg Semyonov
cd6387d0a6
Add support for more than 3-pos FlightMode switches
...
It is now possible to have 1 to 6 flight mode switch positions
(usefull for guidance, position hold and similar use).
The input channel range is divided into N (1 to 6) zones and each
zone represents a flight mode. Default is 3 zones (backward compatible),
but more can be chosen.
How to use: configure Tx mixers in a way they provide required number
of different values for the same FlightMode channel. For instance,
using Turnigy 9X radio with ER9X firmware, one can create a mixer like
this:
-100 MAX ID0 Manual
R -50 MAX ID1 Stabilized1 (Rate)
R 0 MAX ID2 Stabilized2 (Attitude)
R 50 MAX RUD PositionHold
R 100 MAX ELE ReturnToBase
And set number of flight mode positions to 5. As a result, the 3-pos
switch (ID0, ID1, ID2) will provide first three flight modes, the rudder
D/R switch will override those and enable the 4th flight mode, and
elevator D/R switch will have highest precedence and activate the 5th
flight mode.
This will change the ManualControlSettings objectID.
2012-06-23 22:10:19 +03:00
Fredrik Arvidsson
b73cde1787
OP-642 Changed from using an xml element for category to have it defined
...
as an attribute on the uav object definition. This attribute is
optional. If absent no category (empty string) is assigned to the uav
object type.
Added category attribute to a small selection of uavo definition files
to test parsing.
2012-06-20 22:23:06 +02:00
Fredrik Arvidsson
3c754af484
OP-642 Added <category> element which is a string in uavo object type definition to be used in uavo browser to categorise uavo:s visually into subtrees. Category value is assigned in generated code and accessible via getter method. OP-644 Fixed option for uavo browser to enable disable hilights for objects which values wasn't really changed to indicate stream activity in uavo object tree.
2012-06-20 21:26:18 +02:00
PT_Dreamer
e71ab57ffa
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into pt/MapEnhancements
...
Conflicts:
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-06-17 23:56:27 +01:00
Laura Sebesta
87900043a4
Typo fix. Grammarians will be extreamely glad to complement the OP team now that these errors haved disappeared.
2012-06-17 10:21:58 +03:00
James Cotton
f8d196ffe8
Added support for board voltage monitor to battery module.
...
The module can be configured to enable what's needed from board voltage, battery voltage and battery current measurement.
In GCS the POWER box in system healt will show alarm related to the supply voltage to the board.
If a power warning/critical alarm is raised, the warning condition is left even if the board voltage return to an acceptable value.
Conflicts:
ground/openpilotgcs/share/openpilotgcs/diagrams/default/system-health.svg
shared/uavobjectdefinition/systemalarms.xml
2012-06-15 19:43:34 -05:00
Laura Sebesta
0e201818f0
Refactored variable names for more clarity. Changed some integrals, alititude control
...
seem to work a little better.
2012-06-15 18:02:24 +03:00
James Cotton
9218145aa9
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo
2012-06-12 22:53:30 -05:00
Stacey Sheldon
c73cffce59
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
Makefile
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/Revolution/System/inc/pios_config.h
package/Makefile
Fixed CRLF line end clobbering in:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/Common/pios_usb_util.c
flight/PiOS/STM32F4xx/pios_iap.c
flight/PiOS/inc/pios_rfm22b_priv.h
flight/PiOS/inc/pios_usb_util.h
2012-06-10 19:01:11 -04:00
Brian Webb
2088753ee5
Changed the flight side access of GCSReceiver to readwrite to support sending GCSReceiver object in response to PPM packets on the PipX.
2012-06-09 10:54:07 -07:00
James Cotton
9e5b1658b1
Remove AHRSComms from SystemAlarms
2012-06-09 12:14:11 -05:00
James Cotton
463ad550e2
A few comments in my code and some simplication to the fixedwingfollower to get
...
it compiling against my path planner.
2012-06-08 10:46:40 -05:00
James Cotton
4c3ca17e34
Backport the fixed wing path follower
2012-06-08 10:46:39 -05:00
James Cotton
574ab3fcaa
Make the VtolPathFollower an optional module
...
Note that RTH mode right now checks that throttle control is enabled, but this
should only occur if the system is a VTOL.
2012-06-08 10:46:38 -05:00
James Cotton
f5b2575c88
Merge branch 'next' into revo
...
Conflicts:
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/Revolution/System/inc/pios_config.h
package/Makefile
2012-06-07 12:45:06 -05:00
James Cotton
7b8110a457
Merge branch 'MikeL' into next
2012-06-07 11:31:41 -05:00
James Cotton
c689bcfb80
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo
2012-06-07 09:49:18 -05:00
James Cotton
5e01617cbd
Merge branch 'next' into MikeL
...
Conflicts:
ground/openpilotgcs/src/plugins/config/airframe.ui
ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
ground/openpilotgcs/src/plugins/config/configoutputwidget.h
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.h
2012-06-06 11:58:06 -05:00
Brian Webb
4e68f6543e
Added tracking of dropped packets to PipX and turned off visible text on signal strength meters.
2012-06-04 21:18:13 -07:00
Mike LaBranche
0ba8345c51
Merge branch 'next' into MikeL
...
Conflicts:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_iap.c
flight/Revolution/System/inc/pios_config.h
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 16:59:31 -07:00
Mike LaBranche
bf591ebe45
Merge branch 'next' into MikeL
...
Conflicts:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_iap.c
flight/Revolution/System/inc/pios_config.h
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 15:38:57 -07:00
James Cotton
0b828fbdd0
Merge branch 'next' into revo
...
Conflicts:
Makefile
2012-06-04 14:12:19 -05:00
James Cotton
ff0a3a156e
Merge remote-tracking branch 'origin/os/AeroSimRC' into next
2012-06-04 12:25:59 -05:00
James Cotton
ed2fb5cb09
Merge branch 'next' into revo
2012-06-04 12:23:58 -05:00
James Cotton
bda3f301cb
Rename VBar mode to VirtualBar
2012-06-04 12:22:39 -05:00
James Cotton
4c562b88d1
Make the amount to suppress the gyros adjustable instead of binary
2012-06-04 12:22:39 -05:00
James Cotton
59972d5570
Limit the number of degrees the vbar can deflect. This is good for fast flips
...
etc.
2012-06-04 12:22:39 -05:00
James Cotton
6719ee8639
Add piro compensation option to the vbar mode
2012-06-04 12:22:39 -05:00
James Cotton
3283b99d4e
For hardcode flipping allow full stick to completely override the gyro
...
feedback.
2012-06-04 12:22:39 -05:00
James Cotton
df82cb6ada
Change the units to something more reasonable
2012-06-04 12:22:39 -05:00
James Cotton
fe978504bc
Add friendly settings for the vbar mode including the VbarTau which acts like
...
the time constant.
2012-06-04 12:22:39 -05:00
James Cotton
1b55df733d
Create virtual flybar setting for stabilization modes
2012-06-04 12:22:38 -05:00
James Cotton
daaa661080
Turned "Battery" into an optional module. It otherwise prevents flying if no voltage sensor is installed.
...
Conflicts:
shared/uavobjectdefinition/hwsettings.xml
2012-06-04 10:50:45 -05:00
Corvus Corax
78857cefaa
Turned "Battery" into an optional module. It otherwise prevents flying if no voltage sensor is installed.
2012-06-04 17:31:45 +02:00
James Cotton
10aa31a57f
When ManualControlSettings.FailsafeBehavior is set to RTH and no valid input is
...
detected and the aircraft is armed enter RTH mode.
2012-06-04 09:48:05 -05:00
James Cotton
21eb48c58c
Add a RTH flight mode and remove it from the waypoint actions as that is
...
redundant with flying to (0,0,0)
2012-06-03 22:14:11 -05:00
James Cotton
71e14a691e
Merge branch 'next' into revo
2012-06-03 19:00:51 -05:00
James Cotton
484057e9ae
Revert "Change waypoints to update on change"
...
This reverts commit 2e5c34b8efce01810f2da26c1b7b54a70e90daad.
2012-06-02 18:40:54 -05:00
James Cotton
3ac14fccb7
Change waypoints to update on change
2012-06-02 18:40:54 -05:00
James Cotton
4ad23864c8
Treat the waypoint action as something to do once you hit that location. (e.g.
...
PathToNext) and add a Stop value to indicate not to advance to the next
waypoint. This is essentially a perament loiter to the pathfollower (I think)
but it's really just to have the ability to "delete" waypoints.
2012-06-02 18:40:53 -05:00
Corvus Corax
ab28686976
Merge branch 'corvuscorax/new_navigation' into revo-next
2012-06-02 22:30:44 +02:00
James Cotton
25f85ee4fe
Add an error flag to ObjectPersistence and when saving a setting make it verify
...
that the data reads successfully.
2012-06-02 10:23:27 -05:00
PT_Dreamer
3106917703
GCS/MapLib - added some UAVOs from Corvus pathplanner branch
2012-06-01 19:14:50 +01:00
Sambas
ed1a4dada6
Merge remote-tracking branch 'remotes/origin/sambas/osd_test_v1' into revo-next
...
Conflicts:
flight/PiOS/STM32F4xx/pios_adc.c
2012-05-30 16:30:09 +03:00
Corvus Corax
298b6233ed
Merge branch 'revo-next' into corvuscorax/new_navigation
...
Conflicts:
flight/Libraries/paths.c
flight/Modules/ManualControl/manualcontrol.c
flight/Revolution/Makefile
shared/uavobjectdefinition/taskinfo.xml
2012-05-30 00:51:52 +02:00
James Cotton
1934752d50
Merge branch 'revo-next' into revo
2012-05-28 15:23:14 -05:00
Corvus Corax
1ad2b19d28
PathPlanner: fixed a few failsafes, changed waypointID to int16 - negative jump ids have special meaning
2012-05-28 20:50:09 +02:00
Oleg Semyonov
5739dfbfc8
Merge remote-tracking branch 'origin/next' into os/aerosimrc
...
Conflicts:
shared/uavobjectdefinition/gcsreceiver.xml
2012-05-28 21:46:43 +03:00
James Cotton
4360d8adfd
Merge branch 'next' into revo-next
2012-05-28 11:25:40 -05:00
Sambas
147100bc2f
Merge remote-tracking branch 'remotes/origin/revo-next' into osd_test_v1
...
Conflicts:
Makefile
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-05-28 19:06:25 +03:00
James Cotton
8a6073fbaf
Merge remote-tracking branch 'revo/revo-next' into testing
...
Conflicts:
Makefile
flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/portable/GCC/Posix/port.c
flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/task.c
flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/portable/GCC/Posix/port_posix.c
flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
flight/Revolution/Makefile
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
ground/openpilotgcs/src/plugins/uploader/devicewidget.cpp
shared/uavobjectdefinition/taskinfo.xml
2012-05-28 09:13:26 -05:00
Corvus Corax
089aa54a59
FixedWingpathFollower: Added debug output of error indicators
2012-05-28 14:46:03 +02:00
Corvus Corax
90e4047e2c
bugfix to etasv3 - made uavobject def compatible with new update modes
2012-05-28 13:09:38 +02:00
Corvus Corax
978ab5b96c
Merge remote branch 'origin/stac/etasv3' into revo-next
2012-05-28 12:56:27 +02:00
Oleg Semyonov
f95d29a3b8
TxPID: add GyroTau to the list of parameters (OP-637)
2012-05-28 12:48:55 +03:00
Corvus Corax
e6f4a40d3e
path library: updated API and usage from pathfollowers, added new conditions and additional user feedback in pathstatus
2012-05-28 01:51:17 +02:00
Corvus Corax
634a190d4f
FixedWingPathFollower: Redesigned and tested FixedWingpathFollower
2012-05-27 20:49:07 +02:00
Corvus Corax
ef8d7275a8
PathFollower and PathPlanner: fixes for fixed wing
2012-05-27 02:38:56 +02:00