rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-02 10:24:11 +01:00
Code Issues Releases Activity
11,063 Commits 5 Branches 8 Tags 266 MiB
6faf1a73ac
Commit Graph

690 Commits

Author SHA1 Message Date
Alessio Morale
82c81fef6e OP-1302 make leds more "readable" 
Show alarm and arming/flightmode in sequence
Alarm:
Warning = rP
Error = rrP
Critical = R

Heartbeat/flightmode:
disarmed = B
armed/Stabilization1 = bbP
armed/Stabilization2 = bbbP
armed/Stabilization3 = bbbbP
armed/AH/AVario/Velocitycontrol = bvP
armed/PH/Pathplanner/POI = bbvP
armed/Land/RTB = bbvvP

note:
r/b/v = short red/blue/both blink
R/B/V = long red/blue/both blink
p/P = short/long pause
 2014-04-12 22:00:02 +02:00
Bertrand Oresve
80d7363dfa OP-1056 Fix the TIMEUTC valid flags (with Werner suggestion) 2014-04-12 11:48:18 +02:00
Bertrand Oresve
d70d8df272 OP-1056 Fix the TIMEUTC valid flags in GPS UBX protocol 2014-04-12 09:24:08 +02:00
Corvus Corax
661bea2372 OP-1296 - some explicit const declarations in stateestimation 2014-04-10 20:17:01 +02:00
Andres
598a48a2d9 OP-1299 Added autodetect battery cell number before arming. Tested for LiPo from 2S to 6S. Over 6S counting is not possible for LiPo. Should work for LiCo too. LiFePo works only for 1S or 2S. I was not able to find values for LiFeSO4. FlightBatteryState has now two new fields: NbCells and NbCellsAutodetected, which register the autodetection. FlightBatteryState.NbCells should be used instead of FlightBatterySettings.NbCells now, when the number of cells in needed. FlightBatterySettings.NbCells is used by the user to prescribe a cell number or if equal to zero to ask for autodetection. 2014-04-10 17:28:48 +02:00
Alessio Morale
1fe591d51e OP-975 change BoardRotation data type to float so it can be used for level calibration 2014-04-10 01:47:37 +02:00
Alessio Morale
8eeb3217bf OP-975/OP-1068 replace simple scaling with a calibration matrix for magnetometer correction 2014-04-08 21:22:09 +02:00
Alessio Morale
4764186a5f OP-1235 cleanup "magic numbers" 2014-04-08 20:51:16 +02:00
Corvus Corax
cb16cf04e1 Merge branch next into 'corvuscorax/OP-1296_barometer-initialization-fix' 2014-04-08 19:26:43 +02:00
Corvus Corax
011c598793 OP-1296 only use GPS in filterchains when explicitly requested 
disallow arming when GPS is needed for initialization until lock is acquired
 2014-04-08 18:31:11 +02:00
Alessio Morale
6d1fabdd5f OP-1294 declare controlHandler as const, add a new PIOS_EXCLUDE_ADVANCED_FEATURES that disables all nav features 2014-04-08 00:30:10 +02:00
Alessio Morale
492275bf0e OP-1294 Fix undeclared STACK_SIZE_BYTES for revo 2014-04-06 19:26:48 +02:00
Alessio Morale
eed5c098ab OP-1294 Allow to specify different stack sizes for rx and tx telemetry task. 2014-04-06 19:19:44 +02:00
Corvus Corax
9a52f506ef drive-by bugfix in Fixedwingpathfollower 2014-04-06 15:38:22 +02:00
Corvus Corax
5b6d397f76 OP-1290 uncommented accidentally commented lines 2014-04-05 13:00:21 +02:00
Corvus Corax
bb91039f51 OP-1290 fixes in telemetry (and pios_board initialization) 2014-04-05 12:53:31 +02:00
Bertrand Oresve
654d842c22 OP-1288 Remove PositionSource from VtolPathFollowerSettings 2014-04-05 12:12:48 +02:00
Alessio Morale
8bb1d0148c Uncrustify 2014-04-01 22:58:23 +02:00
Alessio Morale
6540c69698 Merge remote-tracking branch 'origin/andrecillo/OP-1273_PixHawk_airspeed_sensor_MS4525DO' into next 2014-04-01 22:05:12 +02:00
Alessio Morale
3ebc17e7d7 Merge remote-tracking branch 'origin/sparkie79/OP-1266_negative-thermal-compensation-coeff' into next 2014-04-01 21:58:06 +02:00
Alessio Morale
fe985d2326 Merge remote-tracking branch 'origin/laurent/OP-1241_TxPID_Bank3' into next 2014-04-01 21:34:18 +02:00
Alessio Morale
18be34db05 Merge remote-tracking branch 'origin/filnet/OP-1246_RadioComBridge_bugs' into next 2014-04-01 21:31:32 +02:00
Andres
fd5d1e42a3 OP-1273 OP-1282 OP-1283 corrected compilation error for fw_revoproto 2014-04-01 07:46:50 +02:00
Andres
5ed417323e OP-1273 OP-1282 OP-1283 bug fixes on I2C library: check for intialization and hot-plug robustness 2014-03-31 22:16:29 +02:00
Andres
a08b7ad21c OP-1273 OP-1282 OP-1283 uncrustify 2014-03-28 17:11:55 +01:00
Andres
7067f4f8ff Merge branch 'andrecillo/OP-1283_SystemHealthGadgetWidget_updateAlarms_coordinate_calculation_correction' into andrecillo/OP-1273_OP-1282_OP-1283_Diverse_Airspeedsensor_improvements 
Merged correction on coordinate calculation in SystemHealth gadget for correct display of Airspeed-Alarm
 2014-03-28 17:01:44 +01:00
Andres
e014a61fcc OP-1273 OP-1282 OP-1283 diverse improvements in airspeed sensor handling including implementation of PixHaw sensor, airspeedalarm in Systemhealth and in all airspeed sensors; file added 2014-03-28 17:00:42 +01:00
Andres
9a207fbb80 OP-1273 OP-1282 OP-1283 diverse improvements in airspeed sensor handling including implementation of PixHaw sensor, airspeedalarm in Systemhealth and in all airspeed sensors; file changes 2014-03-28 16:59:52 +01:00
Andres
ef78320112 Merge branch 'andrecillo/OP-1273_PixHawk_airspeed_sensor_MS4525DO' into andrecillo/OP-1282_Eagletree_airspeed_sensor_I2C_alarms 
Merged because both senosors should use the Airpeed alarm and andrecillo/OP-1282_Eagletree_airspeed_sensor_I2C_alarms is based on functionality implemented in andrecillo/OP-1273_PixHawk_airspeed_sensor_MS4525DO
 2014-03-28 14:54:27 +01:00
Andres
7ec855af5f OP-1273 added and implemented Airpeed alarm for the PixHawk sensor 2014-03-28 14:18:14 +01:00
Corvus Corax
fe04cf7d29 uncrustification 2014-03-27 21:19:03 +01:00
Corvus Corax
7bd7c20fd9 Merge remote-tracking branch 'origin/Bertrand/OP-1267_Update_HomeLocation_In_LLA_Filter' into next 2014-03-27 21:17:42 +01:00
Andres
4188b492fc OP-1273 added I2C warning alarm during calibration of zero point, and uncrustify 2014-03-27 16:59:48 +01:00
Andres
af86a3eb37 OP-1282 Added I2C alarm in baro_airspeedGetETASV3 and did uncrustify 2014-03-27 16:49:57 +01:00
Andres
c5dc556a43 OP-1273 Uncrustify 2014-03-27 16:19:22 +01:00
Andres
8e26338f24 OP-1273 I2C Alarm reset to default when AirspeedSensorType is changed. Small cosmetic corrections 2014-03-27 09:32:17 +01:00
Cliff Geerdes
48345f0194 OP-1259 First tested version 2014-03-27 01:37:56 -04:00
Cliff Geerdes
45fa3220a5 Merge branch 'next' into theothercliff/OP-1259_Cruise_Control_Tweaks 2014-03-26 13:49:17 -04:00
Cliff Geerdes
81f31e64a9 OP-1259 WIP to merge next in locally 2014-03-26 13:48:24 -04:00
Cliff Geerdes
d38360b665 OP-1259 small code beautification 2014-03-26 13:35:04 -04:00
Cliff Geerdes
eaa58fd1dc Merge branch 'theothercliff/OP-1260_Rattitude_Tweaks' into next 2014-03-26 12:22:17 -04:00
Andres
9d30673d18 OP-1273 attitude estimation uses airspeedSensor.TrueAirspeed when available (e.g. from MS4525DO; available when TrueAirspeed >=0 ) instead of using an altitude correction IAS2TAS(alt). When not available it falls back to IAS2TAS(alt) 2014-03-26 09:15:56 +01:00
Bertrand Oresve
199193aa3f OP-1267 Fix UAV position after a HomeLocation Update (adding #define to be clearer) 2014-03-25 21:00:10 +01:00
Andrés Chavarría Krauser
4dff86dc9c OP-1273 New files for the MS4525DO PixHawk speed sensor: PIOS files and module files 2014-03-25 10:37:10 +01:00
Andrés Chavarría Krauser
f8f53d8801 OP-1273 Adaptations to include MS4525DO PixHawk speed sensor 2014-03-25 09:18:25 +01:00
Cliff Geerdes
d36cfe28ed OP-1260 finish renaming RattitudeModeTransition I don't know how it built before. 2014-03-23 19:04:17 -04:00
Cosimo Corrado
fc30ababf0 use fabsf instead abs 2014-03-23 22:07:09 +01:00
Cliff Geerdes
5ecea4bf33 OP-1260 fix misspelling of RattitudeModeTransition 2014-03-23 13:00:00 -04:00
Alessio Morale
abd7da20df Merge branch 'amorale/OP-1026_cpu_idle' into next 2014-03-23 15:32:19 +01:00
Bertrand Oresve
10dec58a10 OP-1267 Fix UAV position after a HomeLocation Update 2014-03-23 12:56:01 +01:00
Cliff Geerdes
6d7d10caba OP-1259 PowerDelayComp addtl inverted modes 2014-03-22 01:18:06 -04:00
Cliff Geerdes
820e8dfa3e OP-1260 use predefined macro for size of Flight Mode Switch 2014-03-21 22:34:03 -04:00
Cosimo Corrado
739aefd53b OP-1266 Fix checking for temperature compensation coeffs 2014-03-20 22:36:09 +01:00
Cliff Geerdes
945b60cf99 OP-1260 Fixed typo in a fairly important comment 2014-03-20 12:41:48 -04:00
Cliff Geerdes
1cb9d9548f OP-1160 limit values in flight code (not just GCS) to avoid DZ. Set GCS tab index back to 0. 2014-03-17 22:40:19 -04:00
Cliff Geerdes
390533f2e3 OP-1160 Oops, forgot to remove #if 0's after testing 2014-03-14 02:14:02 -04:00
Cliff Geerdes
297b0d01cb OP-1260 remove anti-windup, 2 PIDs, mode transition 2014-03-14 01:47:37 -04:00
Alessio Morale
8218becdac uncrustify 2014-03-09 16:43:31 +01:00
Alessio Morale
0f2d65a8e4 Merge branch 'amorale/OP-974_make_bl_info_available_to_fw' into next 2014-03-09 16:17:34 +01:00
Alessio Morale
f9abb1d8c1 Merge branch 'amorale/OP-1232_eventsys_warn_on_high_telem_update_rate' into next 2014-03-09 16:14:03 +01:00
Alessio Morale
e407eb8126 Merge branch 'next' of git://git.openpilot.org/OpenPilot into next 2014-03-09 14:38:17 +01:00
Alessio Morale
0b30b79c98 Merge remote-tracking branch 'origin/amorale/OP-1149_gyro_accel_thermal_calibration' into next 
Conflicts:
	ground/openpilotgcs/src/libs/eigen/Eigen/src/Core/util/Memory.h
	ground/openpilotgcs/src/plugins/config/revosensors.ui
	ground/openpilotgcs/src/plugins/setupwizard/vehicleconfigurationhelper.cpp
 2014-03-09 14:38:08 +01:00
Corvus Corax
0ece1a1fb3 OP-1216 removed "reverseThrottle" systemsetting and have reversethrottle implicitly allowed for REVERSABLEMOTOR type outputs 2014-03-09 10:00:58 +01:00
Corvus Corax
148b453aad OP-1216 added new mixer output type "reversable motor" to have engines which can can backwards go to a safe level when disarmed 2014-03-09 01:37:22 +01:00
Laurent Lalanne
aa7a8f62c7 OP-1241 TxPID Does not work for Bank 3 PID settings (Typo) 2014-03-07 22:04:14 +01:00
Philippe Renon
7ab38eacb6 OP-1246 removed now uneeded FIXME tag in RadioComBridge 2014-03-04 10:02:43 +01:00
Philippe Renon
067cb6f098 OP-1246 made updating of RadioComBridgeStats thread safe 2014-03-04 09:56:42 +01:00
Philippe Renon
29198e17cf OP-1246 fixed wrong logic for telemtryTxRetries and radioTxRetries : was wrongly accumulated 2014-03-04 09:51:45 +01:00
Philippe Renon
1e3e8a29a9 OP-1246 fixed clumsy error handling of UAVTalkSendObject calls from RadioComBridge 2014-03-04 09:49:34 +01:00
Corvus Corax
dbbb8d5e0d OP-1216 fixes as suggested in OPReview-645 2014-03-03 18:58:09 +01:00
Corvus Corax
2c99b008c6 OP-1216 some fixes to flightmode and arm state management, update GCS control widget to be able to test and debug new control infrastructure 2014-03-02 22:20:18 +01:00
Corvus Corax
12eed41e58 OP-1216 modified alarms for manualcontrol/receiver to reflect new architecture 2014-03-02 20:12:19 +01:00
Corvus Corax
564a991222 adjusted Stabilization stack size to get rid of stack alarm 2014-03-02 19:11:49 +01:00
Corvus Corax
2f57ea2ab3 added missing initializations to allow boot without manualcontrol module 2014-03-02 19:00:37 +01:00
Corvus Corax
f61231f610 OP-1216 moved safety zeroing for channels from Stabilization to Actuators (so it also affects manual mode) 2014-03-02 15:35:39 +01:00
Corvus Corax
3ea9042279 Merge branch 'next' into corvuscorax/OP-1216_flight-control-refurbishment 2014-03-02 14:54:01 +01:00
Corvus Corax
cdca8d835c OP-1216 manualcontrol refactoring 2014-03-02 14:45:17 +01:00
Alessio Morale
7f6175d817 OP-1235 allows AccelBiasValue to quickly reach the target value at initialization 2014-02-23 13:05:20 +01:00
Alessio Morale
a2386f548b OP-1235 allow for live update of altitude estimation settings 2014-02-23 13:05:20 +01:00
Alessio Morale
bc3636bbd6 OP-1235 gives better names to state variables 
Conflicts:
	flight/modules/StateEstimation/filteraltitude.c
 2014-02-23 13:05:20 +01:00
Alessio Morale
2bcbf7dc86 OP-1026 remove legacy idle time calculation in OPLink code 2014-02-22 00:31:06 +01:00
Alessio Morale
3fc3b5b01b OP-1026 replace idle time calculation with task monitor API 2014-02-22 00:30:03 +01:00
Alessio Morale
3cf1662bc8 Merge remote-tracking branch 'origin/amorale/OP-1212_telemetry_prio_queue' into next 2014-02-21 19:16:52 +01:00
Alessio Morale
b879bd8fb4 OP-1232 set lowpriority field on all other UAVObjEvent usage intances 2014-02-18 01:04:43 +01:00
Alessio Morale
26f3422612 OP-1232 add a low priority flag that prevent raising the error counter in eventdispatcher, to be used for telemetry 2014-02-18 01:03:57 +01:00
Corvus Corax
e97ce303b8 Merge branch 'corvuscorax/OP-942_task-diagnostics-for-callbacks' into next 2014-02-18 00:03:07 +01:00
Alessio Morale
3044185019 Merge remote-tracking branch 'origin/amorale/OP-1218_pios_com_thread_safe' into rel-14.01 
Conflicts:
	flight/modules/RadioComBridge/RadioComBridge.c
 2014-02-17 15:24:50 +01:00
Corvus Corax
0ebc92d9f5 Merge branch 'corvuscorax/OP-942_task-diagnostics-for-callbacks' into corvuscorax/OP-1216_flight-control-refurbishment 
Conflicts:
	flight/modules/AltitudeHold/altitudehold.c
 2014-02-16 19:08:39 +01:00
Corvus Corax
7dd911efdb OP-1217 change the way modules are enabled/disabled based on flightstatus 2014-02-16 19:07:31 +01:00
Corvus Corax
1898d0ad35 OP-1217 create new receiver module 
This module includes all the receiver IO and parsing/failsafe
functionality of ManualControl, but does none of the interpretations in
regards to flight mode / actuator control or arming that was included in
the old ManualControl

In a second step the old ManualControl module needs to be adapted to do
only these ommitted things in a modular way - as a delayed callback
 2014-02-16 15:09:08 +01:00
Corvus Corax
d6ede78fd7 dummy commit - renamed file back 2014-02-16 13:52:04 +01:00
Corvus Corax
227aab80b9 OP-1217 moved manualcontrol to receiver 2014-02-16 13:49:51 +01:00
Corvus Corax
f066bcb2d9 OP-942 changed enum term from HARMLESS to WARNING as requested 2014-02-16 12:50:40 +01:00
Corvus Corax
37ef381f8d OP-1216 clamping of throttle to -1 in actuators (optional) 2014-02-16 12:27:01 +01:00
Corvus Corax
5f2ce2e0a1 Merge branch 'next' into corvuscorax/OP-1216_flight-control-refurbishment 2014-02-16 12:26:45 +01:00
Alessio Morale
8cd5cfe2eb OP-1218 format/consmetic/comments fixes 2014-02-15 22:05:56 +01:00
Alessio Morale
21b0049a68 OP-1218 fix missing "ret =" 2014-02-11 16:51:56 +01:00
Alessio Morale
15200eafd8 OP-974 add bootloader revision info in FirmwareIAP 2014-02-11 12:38:55 +01:00
Alessio Morale
1ba5dbaca8 uncrustify 2014-02-10 22:57:24 +01:00
Alessio Morale
e16cf0ef8d OP-1218 changes to RadioComBridge to support return code. 2014-02-09 19:57:16 +01:00
Corvus Corax
b5a27d05e7 OP-1197 configurable failsafes OP-1219 thrust control OP-1217 separate manualcontrolsettings apart 2014-02-09 19:37:22 +01:00
Corvus Corax
7ec21a8f36 OP-942 duplicated exact API of task_monitor to also monitor callbacks 
This allows cleaner and fine grained handling of STACKOVERFLOW alarms
 2014-02-07 22:39:16 +01:00
Alessio Morale
8bdadaaff2 OP-1212 better wait on priority queue than std queue 2014-02-07 20:01:02 +01:00
Alessio Morale
7a39d93952 OP-1212 handle priority queues for setUpdatePeriod and setLoggingPeriod 2014-02-07 18:36:33 +01:00
Corvus Corax
9a6072d58c Merge branch 'next' into corvuscorax/OP-942_task-diagnostics-for-callbacks 
Conflicts:
	flight/targets/boards/simposix/firmware/Makefile
 2014-02-07 00:31:32 +01:00
Corvus Corax
6566a29054 OP-942 reliable and fast free stack test algorithm - will always 'see' overflows 2014-02-06 23:54:30 +01:00
Corvus Corax
c7ada40c2e Merge branch 'corvuscorax/OP-1211_time_measurement_helper' into rel-14.01 2014-02-06 19:56:47 +01:00
Alessio Morale
df2bb8eb84 OP-1149 missing uncrustification 2014-02-06 00:57:57 +01:00
Alessio Morale
5bb5b34447 OP-1149: second order correction for all gyro axis. Add calibrated range contraint for temperature. 
cleanup replacing all the arrays of floats[] with corresponding AccelGyroSettings* structs.
 2014-02-06 00:57:27 +01:00
Alessio Morale
c9f9faafd5 OP-1149: all gyro have second order temp bias polynomials. remove unneeded copies of AccelGyroSettings values 2014-02-06 00:52:44 +01:00
Alessio Morale
13f1f3f23a OP-1212 Add "priority" attribute to uavojects that grant them higher priority when sent with telemetry 2014-02-04 21:03:42 +01:00
Alessio Morale
01822d7a0c OP-1212 Fix priority queue handling and use it for setting processing 2014-02-04 20:49:36 +01:00
Corvus Corax
28be9cc8ce OP-1211 adapted existing code to use new pios functionality instead of separate error prone implementations 2014-02-04 19:48:33 +01:00
Corvus Corax
a3bb523bf3 OP-1211 adjusted alpha value to more sensible default 2014-02-04 19:21:33 +01:00
Corvus Corax
723e22aa1a OP-1211 time_measurement_helper 2014-02-04 19:05:17 +01:00
Alessio Morale
eea194d22f OP-1149: fix type for accel bias. 2014-02-03 20:30:10 +01:00
Corvus Corax
49a1c4c28f OP-942 refactored callback scheduler to fit into PiOS naming scheme 2014-02-02 22:08:16 +01:00
Corvus Corax
b076ba02a1 OP-942 API change to CallbackScheduler - include unique ID for each callback for a taskinfo like UAVObject 2014-02-02 19:54:17 +01:00
Alessio Morale
27c19d7cb1 OP-1149/OP-1150: uncrustify/Cleanup 2014-02-02 18:53:35 +01:00
Alessio Morale
e599b01806 OP-1149: Fix calibraton settings not loaded at startup. 2014-02-02 18:50:53 +01:00
Corvus Corax
8b25ac1894 OP-1195 adapted task priorities for manualcontrol and stabilization 2014-02-02 14:13:25 +01:00
Alessio Morale
68d676db64 OP-1149: limit accel/gyro correction to calibrated temperature range. 2014-01-31 21:01:09 +01:00
Alessio Morale
f1bea0556d OP-1149: limit baro correction to calibrated temperature range. 2014-01-28 23:08:28 +01:00
Alessio Morale
9c1c556c9c Merge branch 'amorale/OP-1139_baro_2nd_order_compensation' into amorale/OP-1149_gyro_accel_thermal_calibration 2014-01-26 22:54:57 +01:00
Corvus Corax
ee452c8d4d OP-1192 Do not allow craft to be armed if input is incorrectly calibrated (and throttle cant go < 0 ) 2014-01-23 21:36:45 +01:00
Alessio Morale
02c7084196 Merge remote-tracking branch 'origin/next' into amorale/OP-1149_gyro_accel_thermal_calibration 
Conflicts:
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
 2014-01-23 01:02:13 +01:00
Alessio Morale
99e9009c14 Merge branch 'amorale/OP-1188_stabilization_stack_optimization' into rel-14.01 2014-01-22 20:27:25 +01:00
Alessio Morale
c1f810f1ce OP-1188 fix an issue that is preventing bank initialization at startup 2014-01-22 00:01:38 +01:00
Alessio Morale
f9ac3a3de2 OP-1188 Optimize stack utilization for multipid bank selection in Stabilization module 
+review OPReview
 2014-01-21 22:44:26 +01:00
Corvus Corax
6d855fbaf0 OP-1177 remove cc algorithm from altitude hold code 2014-01-21 20:21:38 +01:00
Alessio Morale
7188394e39 Uncrustification 2014-01-19 12:37:25 +01:00
Alessio Morale
1b0c301c20 OP-1152 Fix stabilization stack size on Revo. 2014-01-18 17:59:56 +01:00
Alessio Morale
1f61676d0a Merge branch 'amorale/OP-1152_stack_verification' into next 
Conflicts:
	flight/targets/boards/coptercontrol/firmware/inc/pios_config.h
 2014-01-18 13:54:06 +01:00
Cliff Geerdes
02dfac7e6e OP-1167 set default for FSM switch to first position 2014-01-17 23:52:16 -05:00
Corvus Corax
91d5a865da uncrustification 2014-01-18 00:32:50 +01:00
m_thread
234626444e Merge remote-tracking branch 'origin/next' into thread/OP-1154_Cruise_Control_automatically_increase_copter_throttle_per 2014-01-17 13:16:15 +01:00
Cliff Geerdes
bfb5a248a0 OP-1154 enables for individual flight mode switch positions 2014-01-16 16:51:19 -05:00
Corvus Corax
41202a0227 Merge branch 'corvuscorax/OP-1022_AH_improvements_amorale' into next 2014-01-15 22:47:42 +01:00
Les Newell
2b32c5ebc3 Merged theothercliff/OP-1154_Cruise_Control_automatically_increase_copter_throttle_per_1/cos(bank_angle) 
Changed pid banks to use flight mode switch position instead of FlightStatus.FlightMode
 2014-01-15 19:37:13 +00:00
Les Newell
f096d01e3c Merge branch 'next' into LesNewell/OP-984_PID_banks_flightmode 2014-01-15 19:17:06 +00:00
Philippe Renon
694747cd27 Merge remote-tracking branch 'origin/next' into filnet/OP-1122_gcs_waypoint_editor_stabilization 
Conflicts:
	ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
 2014-01-15 20:12:08 +01:00
Cliff Geerdes
e6490c0cea OP-1154 Add FlightModeSwitchPosition to ManualControlCommand 2014-01-15 13:53:14 -05:00
Corvus Corax
9997f14d68 Merge remote-tracking branch 'origin/next' into corvuscorax/OP-1022_AH_improvements_amorale 2014-01-15 18:45:09 +01:00
Corvus Corax
92beb54e2d OP-1022 some small cosmetic fixes for AltitudeHold as suggested by Alessio 2014-01-15 18:43:47 +01:00
Philippe Renon
d43b220dc0 OP-1122 uncrustified gcs and flight 2014-01-14 22:46:01 +01:00
Corvus Corax
3b635693a5 OP-1161 changed the way magnetometer-errors are handled - and defaults 
* ekf will ignore magnetometer errors for initialization
 (errors might be caused by not yet existing attitude estimation)
* defaults changed for filtering
* magnetometer sensor will be available for all filters, alarms need to
  be checked separately
 2014-01-14 21:09:14 +01:00
Philippe Renon
1fca85784c OP-1122 OP-1145 added more path plan checks : 
- empty plan (i.e. no waypoints defined)
- out of range waypoint and path action ids

+review OPReview-609
 2014-01-14 21:08:40 +01:00
Philippe Renon
8ccdb252d1 OP-1122 OP-1145 commented out PIOS_DEBUGLOG_Printf calls in pathplanner 
+review OPReview-609
 2014-01-14 21:08:35 +01:00
Philippe Renon
7f2c24db2b OP-1122 OP-1158 - renamed uavobject FlightPlan to PathPlan 
+review OPReview-609
 2014-01-14 21:05:16 +01:00
Les Newell
3b0525c4ab OP-984 Uncrustified 2014-01-14 19:03:42 +00:00
Corvus Corax
75b1a7ff5f OP-1161 moved mag validity check function from sensors to state estimation 2014-01-14 16:45:44 +01:00
Corvus Corax
c180846ca9 OP-1161 discard magnetometer in filters if plausibility alarm is set 2014-01-14 16:45:21 +01:00
Corvus Corax
3d1cc31c3b OP-1161 Add alarm for magnetometer plausibility check 2014-01-14 12:22:01 +01:00
Corvus Corax
07d5c8e4d2 OP-1022 fixed the config plugin widget to represent new simpler settings layout 2014-01-14 00:26:27 +01:00
Corvus Corax
76ee48bc44 OP-1122 safer sanity checks and arming prevention in case of invalid flight plan 2014-01-12 21:37:40 +01:00
Corvus Corax
cb9e76b006 OP-1122 add flightplan safety check to pathplanner - failsafe rth when flightmode is set to pathplan but no valid plan is uploaded 2014-01-12 21:05:54 +01:00
Corvus Corax
b8118f51e7 OP-1156 Made PathPlanner work with delayed callbacks in "navigation" callback task 
Conflicts:
	flight/modules/PathPlanner/pathplanner.c
 2014-01-12 20:13:48 +01:00
Corvus Corax
2ce0cb7909 reverted changes to fixedwingpathfollower - wrong module 2014-01-12 20:13:00 +01:00
Philippe Renon
a64720a9f1 OP-1122 OP-1158 added flight plan CRC consistency checks (in GCS and fixedwingpathfollower module) 
- need to do the same in vtolpathfollower module)
- addressed an issue that could cause unwanted waypoints to be used (path follower was looping over all instanciated wp)
 2014-01-12 19:42:12 +01:00
Philippe Renon
ff8a001a51 Merge remote-tracking branch 'origin/next' into filnet/OP-1122_gcs_waypoint_editor_stabilization 
Conflicts:
	ground/openpilotgcs/src/plugins/config/configpipxtremewidget.cpp
	ground/openpilotgcs/src/plugins/uavobjectutil/uavobjectutilmanager.cpp
 2014-01-12 16:29:17 +01:00
Philippe Renon
aa24f2193a OP-1122 OP-1158 renamed FlightPlanInfo uavobject to FlightPlan 2014-01-12 15:23:21 +01:00
Philippe Renon
d8d9adb1fd OP-1122 OP-1158 remove unused flightplan.h (fixes conflict with new FlightPlan uavobject) 2014-01-12 15:10:15 +01:00
Cliff Geerdes
ccc09721cd OP-1154 Initial version with UAVO's but no GCS GUI 2014-01-11 16:22:20 -05:00
Corvus Corax
77d15b9566 Merge branch 'next' into corvuscorax/OP-1022_AH_improvements_amorale 2014-01-11 10:57:31 +01:00
Corvus Corax
f2bc6508c4 uncrustify --- somone forgot to run uncrustify when merging to next - 
again!!! ;)
 2014-01-11 10:55:50 +01:00
Corvus Corax
ca607ad924 OP-1022 overhaul of altitudehold and manualcontrol - cleanup, 
reimplemented safe throttle cutoff and altitudevario features
 2014-01-11 10:51:47 +01:00
Corvus Corax
4c078f3dd8 Merge branch 'next' into corvuscorax/OP-1022_AH_improvements_amorale 2014-01-11 09:40:34 +01:00
Les Newell
2e030419ca OP-984 Fixed bad merge of stabilization.c 2014-01-10 22:16:50 +00:00
Les Newell
49cf33ee59 Merge branch 'next' into LesNewell/OP-984_PID_banks 
Conflicts:
	flight/modules/Stabilization/stabilization.c
 2014-01-10 19:32:44 +00:00
Philippe Renon
8c7792b6e5 OP-1122 OP-1120 Added a new FligthPlanInfo uavobject 
- FligthPlanInfo contains the number of waypoints and action pathes
- FligthPlanInfo contains a CRC of all waypoints and action pathes
- The CRC is not yet implemented
- These informations will be used to check the consistency of a flight plan
 2014-01-09 01:06:00 +01:00
Philippe Renon
03b3dca76c OP-1122 OP-1145 flight telemetry improvement 
- create periodic queue events only for periodically updated uavobjects
- made error handling more robust
- added a FIXME concerning FlighTelemetryStats as it is updated peridocally using two separate mechanisms
 2014-01-06 21:48:34 +01:00
Philippe Renon
772c395e67 OP-1122 OP-1145 fixed handling of ground messages done by OPLM 
- OPLM used to receive and relay all messages
- OPLM will now reveice only specific messages and relay others as required (needs to be reviewed...)
- add RadioComBridgeStats uavobject to collect and report tx/rx statistics
- made error handling more robust
- added a few FIXMEs
 2014-01-06 21:35:00 +01:00
Alessio Morale
adde6b2f34 OP-1153 Fix for simposix 2014-01-05 23:32:20 +01:00
Alessio Morale
fff060ed9d OP-1153 Add a way to monitor SystemMod stack usage without DIAG_TASKS=y 
SystemStats.SystemModStackRemaining field does contains the relevant information.
 2014-01-05 23:28:31 +01:00
Cliff Geerdes
a48b9cc242 OP-1117 reduced CPU for CC/3D coded log2f() / powf() 2014-01-04 04:22:54 -05:00
Cliff Geerdes
54ac7da2e8 OP-1117 bugfix for refactoring, would keep Ki from working at full stick 2014-01-02 00:56:55 -05:00
Alessio Morale
bd1442437f OP-1139: fix wrong sign for bias and some optimizations 
+review OPReview-598
 2014-01-01 19:13:26 +01:00
Corvus Corax
f5dbe29896 Merge remote-tracking branch 'origin/amorale/OP-1139_baro_2nd_order_compensation' into corvuscorax/OP-1022_AH_improvements_amorale 2013-12-31 16:38:15 +01:00
Corvus Corax
cefcb9881a Altitude Hold - compensation for tilt 2013-12-29 19:09:54 +01:00
Alessio Morale
e04cef2fa4 OP-1149 Uncrustify 2013-12-29 18:45:44 +01:00
Alessio Morale
ac3d7b8d11 OP-1149 Implements thermal accel/gyro bias correction for CC3D 2013-12-29 14:23:46 +01:00
Alessio Morale
260db3446c OP-1149 changes in CC/CC3D code to use AccelGyroSettings for bias/scale instead of AttitudeSettings. 
Bias units of measure are now normalized between CC/CC3D/Revo.
 2013-12-29 14:08:53 +01:00
Corvus Corax
505d334c4b simplified altitude hold control loop 2013-12-27 18:37:27 +01:00
Alessio Morale
7ac2f9f87f OP-1149 Move accel/gyro calibration setting to a separate object, to be reused also for CC3D 2013-12-26 16:55:57 +01:00
Alessio Morale
558e2e1437 OP-1149 introduce a first order temperature calibration for gyro and accel. 
gyro Z is instead using a 2nd degree polinomial for better accuracy as
its drift is harder to be corrected as with the other twos.
 2013-12-25 18:11:53 +01:00
Cliff Geerdes
14aa1f83de OP-1117 make anti windup insensitive to Ki changes, include dT in calcs, linearize config spinner 2013-12-19 03:21:30 -05:00
Philippe Renon
5f33fadb1b OP-1122 OP-1145 flight side uavtalk and telemetry enhancements 
- added more stats (bytes, sync errors, crc errors)
- made error handling more robust
- added some optional PIOS_DEBUGLOG calls
- fixed a timestamp handling bug
 2013-12-19 00:17:08 +01:00
Cliff Geerdes
56b4d8647f OP-1117 Rename Horizon to Rattitude, Anti Windup and dT additions 2013-12-18 05:01:16 -05:00
Cliff Geerdes
35f6caa360 OP-1117 create a second set of rate PIDs so MWH can run rate and attitude separately 2013-12-16 13:42:24 -05:00
Cliff Geerdes
150dbebc63 OP-1117 MultiWiiHorizon flight mode only (not cliffs H1 or H2) 2013-12-15 22:02:06 -05:00
Alessio Morale
f95a86eaed OP-1139: missing uncrustification 2013-12-13 17:10:39 +01:00
Les Newell
faa1b61bf6 OP-984 txpid not using the selected pid bank 2013-12-12 12:11:00 +00:00
Les Newell
0afe6afd11 OP-984 Fixed insufficient stack for stabilization 2013-12-11 19:24:13 +00:00
Les Newell
024d74c0df OP-984 stabilization.c - commented out code that mirrors change to the current bank data object back to the selected bank. This is left in just in case later modules want to be able to modify the currently selected bank. 2013-12-11 17:09:17 +00:00
Les Newell
63ecf6ad73 OP-984 txpid can now select which bank it operates on, rather than using the flight mode selected bank. 2013-12-11 17:09:12 +00:00
Les Newell
68b8586c6b OP-984 Changed stabilization.c to handle multiple pid bank objects 2013-12-11 17:09:08 +00:00
Les Newell
641cf474eb OP-984 Fixed missing include in manualcontrol.c 2013-12-11 17:09:04 +00:00
Les Newell
084e3ccd5d OP-984 Modified manualcontrol to handle pid bank 2013-12-11 17:08:47 +00:00
Les Newell
d625242a45 OP-984 Updated vtolpathfollower to handle PID banks 2013-12-11 17:08:39 +00:00
Les Newell
b550e67056 OP-984 Updated txpid to handle pid banks 2013-12-11 17:08:31 +00:00
Les Newell
f523ba949d OP-984 Modified manualcontrol to use PID bank data object 2013-12-11 17:08:27 +00:00
Les Newell
fddf61377e OP-984 More changes to stabilization.c for bank switching 2013-12-11 17:08:22 +00:00
Les Newell
114c0ac561 OP-984 Added multiple banks code to stabilization.c 2013-12-11 17:08:18 +00:00
Les Newell
ec713be3ea OP-984 Added data UAV object for current stabilization bank 2013-12-11 17:08:10 +00:00
Alessio Morale
44269b6762 OP-1139: export corrected pressure value to uavobject 2013-12-10 02:02:30 +01:00
Alessio Morale
634ba79dcb OP-1141: allow to input a barometer bias model. 
It uses a 3rd degree polynomial to model pressure bias as a function of temperature.
 2013-12-10 01:46:28 +01:00
Corvus Corax
95d52c6b08 fixed signs in control loop 2013-12-08 14:00:18 +01:00
Corvus Corax
84af4b7651 fixes to barofilter 2013-12-08 14:00:09 +01:00
Corvus Corax
66b0ffd682 small fix to baro state filter - more init cycles 2013-12-08 13:35:00 +01:00
Corvus Corax
5cc8dedadf uncrustify changed things 2013-12-08 13:07:26 +01:00
Corvus Corax
3cea14a809 added missing object, added more debug output 2013-12-08 13:06:28 +01:00
Corvus Corax
4ad0e730da added status uavobject for easier debugging 2013-12-08 12:23:16 +01:00
Corvus Corax
90f689cfa1 throttle does not accelerate downwards but upwards - switched sign 2013-12-08 10:44:17 +01:00
Corvus Corax
8832ea24f5 proper uncrustification 2013-12-07 23:31:26 +01:00
Corvus Corax
623c25aa99 new design of altitude hold - warning not tested yet! 2013-12-07 23:16:22 +01:00
Corvus Corax
ff5927bc43 some changes to altitudehold, hope i get that done today... 2013-12-07 17:28:01 +01:00
Corvus Corax
3e1b0fd114 Merge branch 'next' into corvuscorax/OP-1022_AH_improvements_amorale 2013-12-07 16:33:57 +01:00
Corvus Corax
9c6abef89b fixed enabled and disabled messages for logging in all cases 2013-12-01 00:03:24 +01:00
Corvus Corax
be9faabe92 Merge branch 'next' into corvuscorax/onboardlogging 2013-11-26 00:34:01 +01:00
Corvus Corax
1c83d3ee28 BUGFIX to OpLinkMini: oplinkmod needs to initialize the Callback Scheduler 
OPLMini does not use Systemmod but its own system module called
oplinkmod - which did not initialize the callback scheduler. Making the
event dispatcher a callback caused it to no longer run due to the
missing callback scheduler initialization
 2013-11-24 21:24:55 +01:00
Corvus Corax
77b7ba3089 Added new setting 'OnlyWhenArmed' to debuglogsettings 2013-11-19 19:29:24 +01:00
Corvus Corax
d235a24e23 Merge branch 'next' into corvuscorax/onboardlogging 2013-11-19 18:49:58 +01:00
Corvus Corax
7a6c0b61e8 Merge branch 'next' into corvuscorax/callbackeventdispatcher2 2013-11-19 18:36:20 +01:00
Corvus Corax
951c7bfea0 removed redundant code from Telemetry 2013-11-17 22:20:19 +01:00
Corvus Corax
0e502d3734 Modified queue creation for telemetry and logging 
event queues are now created for all uavobjects for both telemetry and
logging, so later modifications from manual to periodic are possible
 2013-11-17 22:10:03 +01:00
Corvus Corax
fcc479f5cb more intelligent log interfacing, including flash formatting option 2013-11-17 20:14:50 +01:00
Corvus Corax
243e261411 UAVObject logging through telemetry module and uavobjectmanager 2013-11-17 17:15:23 +01:00
Corvus Corax
a0746d87fa Logging facility: logs debug data to logfs and exports it through container UAVObject 2013-11-17 02:54:26 +01:00
Corvus Corax
b3ebb91ceb uncrustification 2013-10-19 21:59:07 +02:00
Alessio Morale
c0cfd3dffe Merge branch 'amorale/OP-1058_uavo_named_accessors' into next 2013-09-10 21:20:12 +02:00
Alessio Morale
db7ea48675 Merge remote-tracking branch 'origin/cyr/OP-1076' into next 2013-09-10 20:26:53 +02:00
Alessio Morale
0db9a9bf8d OP-1058 Add xxxGet and xxxSet functions to handle multielement fields as struct 
for example:
EKFStateVariancePSet(EKFStateVariancePData *NewP);
EKFStateVariancePGet(EKFStateVariancePData *NewP);
Also in this case array accessors are renamed as xxxArrayGet/Set:
EKFStateVariancePArraySet(float *NewP);
EKFStateVariancePArrayGet(float *NewP);

Nothing changes for anonymous items as default functions continues to deal with arrays

+review OPReview-552
 2013-09-01 13:23:20 +02:00
Alessio Morale
e91bc28667 OP-1058 Get rid of Unions. 
They caused stack usage increase with -fstrict-aliasing as stack slots are not reused when dealing with unions.
It has now been added the cast_struct_to_array macro in pios_struct_helper.h to handle such case where it is useful to access those homogeneous structs as arrays

+review OPReview-552
 2013-09-01 12:10:55 +02:00
Alessio Morale
11b269f898 Merge remote-tracking branch 'origin/next' into amorale/OP-1058_uavo_named_accessors 2013-08-31 16:03:30 +02:00
Mathieu Rondonneau
e973740b8b OP-1067 run uncrustify 2013-08-28 19:47:44 -07:00
Mathieu Rondonneau
fc6d544476 OP-1067 Force oplonk to report disabled if rfm22b is not initialized. 2013-08-28 19:45:50 -07:00
Erik Gustavsson
e39c3f897e Use xTaskGetTickCount() to time long intervals rather than PIOS_DELAY_GetRaw(), because of wrap-around issues. 2013-08-26 19:14:47 +02:00
Corvus Corax
0db395b4a2 uncrustify 2013-08-11 15:33:59 +02:00
Corvus Corax
0f31368c64 Merge branch 'corvuscorax/OP-1036_fixed-wing-improvements' into next 2013-08-11 15:13:23 +02:00
Corvus Corax
0724fca32a refactored pid_apply_scaled back into pid_apply (rename only) 2013-08-11 15:12:17 +02:00
Mathieu Rondonneau
114e353acb OP-1067 Invalid value for "LinkState" 
Do not retrieve status from rfm22b if not initialized.
 2013-08-09 20:14:13 -07:00
Mathieu Rondonneau
40b0682048 OP-667: This is not an issue since the 2 callers already check for NULL pointer but for consistency, this should be done in the function itself. 2013-08-03 09:39:44 -07:00
Alessio Morale
8dd3c45ccf OP-1058 change some missing occurrencies to .field.XXX notation 
+review OPReview-552
 2013-08-01 11:44:12 +02:00
Alessio Morale
01d963affd OP-1058 uncrustify 2013-08-01 01:28:50 +02:00
Alessio Morale
f226b23c24 OP-1058: fix needed for fw_osd code compilation 2013-08-01 01:19:02 +02:00
Alessio Morale
8351e97faa OP-1058: fix needed for fw_revoproto code compilation 2013-08-01 01:18:53 +02:00
Alessio Morale
df90a13558 OP-1058: fix needed for fw_coptercontrol code compilation 2013-08-01 01:18:26 +02:00
Alessio Morale
9e1acc3165 OP-1058: fix needed for fw_revolution code compilation 2013-07-31 15:24:26 +02:00
Oleg Semyonov
77a6db3007 Merge remote-tracking branch 'origin/os/baro-offset-lpf' into next 2013-07-30 23:41:37 +02:00
Alessio Morale
b4d2423680 OP-1048 fix CF stateestimation bug using AccelTau. 
move *_filtered to stateestimator data struct and initialize them at init.
they were previously used uninitialized thus causing estimation to fail validations, restarting the filter continously

+review OPReview
 2013-07-30 23:41:21 +02:00