1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-05 13:24:11 +01:00
Commit Graph

461 Commits

Author SHA1 Message Date
Mathieu Rondonneau
fbf0b021c7 OP-423: Replace hardcoded value and get value from memory section (change from code review) 2011-06-25 20:06:33 -07:00
Mathieu Rondonneau
0ff5e9a46f Merge branch 'master' into OP-423_Mathieu_Change_Init_To_Reduce_Memory_Footprint 2011-06-21 22:02:13 -07:00
James Cotton
8976d22fad Merge remote-tracking branch 'origin/OP-159_os_sbus' 2011-06-21 17:51:22 -05:00
Oleg Semyonov
6272210df7 sbus: some code cleanup (no functional changes) 2011-06-19 14:30:13 +03:00
Oleg Semyonov
311902f1f2 sbus: implemented S.Bus stream decoding 2011-06-18 23:19:57 +03:00
Mathieu Rondonneau
b67a38661e OP-423: merge master into that branch, resolve conflicts and test with CC and bl_CC
heap reamining is low (about 500) but stacks can be ajusted (specially the 200 bytes from system) to give the level close to 1Ko if needed.

Merge branch 'master' into OP-423_Mathieu_Change_Init_To_Reduce_Memory_Footprint

Conflicts:
	flight/CopterControl/System/inc/FreeRTOSConfig.h
	flight/CopterControl/System/inc/pios_config.h
2011-06-17 19:04:09 -07:00
Mathieu Rondonneau
693c6bc5b0 OP-423: fix bl and bu, also fix compiler problems encountered with make all 2011-06-17 18:54:25 -07:00
Mathieu Rondonneau
65cf467ca4 OP-423: move the module initialize funtion into a specific section for OP and CC.
- create linker section for those <module>Initialize()
- later this list will incorporate parameters as well. (this probably will be more a OP feature to swap/remove/delete module on the fly.
- this is not done at compile time anymore by Makefile.
- this will allow us to have control on the module start at run-time (not implemented but build the ground for it).
- this simplify the startup (Part of code re-org).
- this change does not affect sim_posix and win32 (since they don't need that)
- ensure it's compiling for PiOS.posix
- port to PiOS.win32 but not tested (not compiled)
- tested on CC
- compile on OP.
- this free ~200 bytes.
- current avalable bytes (is we keep the same remaining bytes on the stack than before) is easily passed the 1.2Ko mark on CC with new gcc (4.5.2)
- this does not include init-reorg for each module (I still think more can be freed)
2011-06-16 22:13:19 -07:00
Mathieu Rondonneau
e8cdf22427 OP-423 Port to OP: Claim (at run-time) the remaining un-used bytes (between heap and end of RAM) that are for data growth (needed at compile time).
CAREFULL: the heap section need to be the last section in RAM to avoid overwritting data...

also move address into linker (CC and OP)
2011-06-15 18:54:35 -07:00
Oleg Semyonov
d8201ec45b sbus: provide a stub based on Spektrum driver (for CC only) 2011-06-15 22:35:21 +03:00
Mathieu Rondonneau
ab4e15e9aa OP-423 also claim (at run-time) the remaining un-used bytes (between heap and end of RAM) that are for data growth (needed at compile time).
CAREFULL: the heap section need to be the last section in RAM to avoid overwritting data...

Tested with GCC 4.5.2 this gives 1K of free bytes usable in heap right away (including the 200 bytes saved just by using the new gcc).
This does not include any code re-org yet!
2011-06-14 22:13:30 -07:00
Mathieu Rondonneau
3780de8d3e OP-423 port to OP (heap2) the previous changes done in CC (heap1) (see c95b199166)
I managed to test CC with heap2 changes and the init stack claimed back to heap once scheduler starts.

the changes of this commit are OP related (just cleanup on CC side):
Arch specific stuff (in reset vector) to hide this from portable code:
     - switch back to MSP stack before starting the scheduler so that the sheduler can use the IRQ stack (when/if needed).
     - call the C portable function in heap2 to claim some stack back (the number to claim is taken from linker file).
     - start the scheduler from reset vector (I move this here from main because it make sense to not go back to C (so that I don't need to copy the rolled stack in case the sheduler returns). This make it more clean.
     - Also I have added the call to the mem manager if sheduler return. that way, we don't reset indefinitely if memory runs out. We will go to this handler and figure things out (right now, it's just looping but at least not rebooting. Probably trap NMI would be better (later improvement).
2011-06-14 20:10:53 -07:00
Mathieu Rondonneau
c95b199166 OP-423 do the arch specific stuff (in reset vector) to hide this from portable code:
- switch back to MSP stack before starting the scheduler so that the sheduler can use the IRQ stack (when/if needed).
 - call the C portable function in heap1 to claim some stack back (the number to claim is taken from linker file).
 - start the scheduler from reset vector (I move this here from main because it make sense to not go back to C (so that I don't need to copy the rolled stack in case the sheduler returns). This make it more clean.
 - Also I have added the call to the mem manager if sheduler return. that way, we don't reset indefinitely if memory runs out. We will go to this handler and figure things out (right now, it's just looping but at least not rebooting. Probably trap NMI would be better (later improvement).

The part missing for this part is the weak attribute for the function in heap1.c so that we don't have to update everything with empty stub.
I think the weak atrribute for C function called in assembly is arch dependent so I am not sure if this is possible (will look into it, maybe somebody outthere nows).
Right now, it's heap1 dependent and won't work with heap2. I will clean that up the next couple of days.

I did some test and it looks good.
this is without init code re-organization so we don't free as much as we will be it's good starts.

This compile with sim_posix (since it does not affect portable code) so this is really clean.
I only tested this with CC. I will port it for OP when I will work on heap2.
2011-06-13 21:49:17 -07:00
Mathieu Rondonneau
1f54e32ea9 OP-423 also add changes to OP. (I can not test it because I don't have a board so only compile test) 2011-06-13 17:10:14 -07:00
James Cotton
404c026188 Patch from Zippe to use cycle timer for CPU monitoring. 2011-06-13 00:24:30 -05:00
Mathieu Rondonneau
7598e898fa OP-423 Step-1: split system stack and implement water mark for IRQstack:
- use IRQStack for ISRs (at begening of SRAM) (let's call it the irq stack)
- use end of heap for stack needed during initialization (let's call it the init stack).
- the systemStats in GCS indicate the remaining bytes in the IRQ stack (this is realy usefull to monitor our (nested) IRQs.

This is the base ground to provide as much memory as possible available at task creation time.

Next step is to re-organize the initialization in order to move all the init out of the thread's stacks onto the init stack.
This will provide as much memory as possible available at task creation time.
Basically the stack during initialization will be destroyed once the scheduler starts and dynamic alloc are made (since the init stack is at the end of the heap). We will need to make sure we don't clobber the heap during initialization otherwise this will lead to stack corruption.
2011-06-12 20:23:00 -07:00
dankers
3013a092d9 Merge branch 'OP-519_Mathieu_Upgrade_FreeRTOS' into bugfix-flight 2011-06-04 16:42:15 +10:00
Mathieu Rondonneau
6e64a546df Remove un-used code 2011-06-02 20:21:26 -07:00
Mathieu Rondonneau
071a684248 OP-519 upgrade to FreeRTOS-7.0.1
- only affect flight/PiOS (no change for posix and win32)
- tested on recent master (some runtime on CC with GCS)
- the new timer feature is not compiled-in since we don't use it yet.
- NO TEST FLIGHT
2011-06-01 21:46:28 -07:00
Oleg Semyonov
f770870af7 Merge branch 'bugfix-flight' 2011-06-01 14:53:31 +03:00
Oleg Semyonov
6e418735cf OP-509: fix for ld symbol reference (also fixes build with 4.5.2 gcc) 2011-06-01 00:31:27 +03:00
sambas
17fb31a7fa Spektrum rtc supervisor working, tested on CC and all outputs are activated. Needs review and testing before merge. 2011-05-29 14:52:22 +03:00
sambas
86d02e2d34 Merge branch 'master' of ssh://git.openpilot.org/OpenPilot into spektrum_rtc_supervisor 2011-05-29 10:40:17 +03:00
Stacey Sheldon
ac0eb3a5c7 Merge remote branch 'origin/stac_build-opf-image' 2011-05-26 21:29:53 -04:00
James Cotton
66b85acebd Merge branch 'bugfix-flight' 2011-05-26 20:07:58 -05:00
James Cotton
ca2205d35f OP-378: Tweak INS stack definition to avoid faults 2011-05-26 16:02:15 -05:00
James Cotton
9ede84680e OP-378: Start working on IRQ driven BMA180 reading and also fixed the mag order 2011-05-26 13:57:41 -05:00
James Cotton
6e186bab35 Merge branch 'bugfix-flight' into OP-378_James_INS 2011-05-26 12:19:35 -05:00
James Cotton
0a60c5b57c Merge branch 'master' into OP-378_James_INS 2011-05-26 12:19:30 -05:00
James Cotton
4bc763dafc Extend PiOS DELAY to allow querying the time value in uS 2011-05-26 12:19:04 -05:00
Stacey Sheldon
8bd08e381a build: add support for EE bank on pipx boards
The pipxtreme boards use a sector of the on-board flash
for configuration storage.  Adjust the memory maps to
reflect this.

The board_info_blob is also extended to include the EE
bank definitions.  This should be used by the pipxtreme
firmware rather than determining it based on chip size.
2011-05-24 01:10:40 -04:00
Stacey Sheldon
2d47427b05 link: Use alternate declaration of pios_board_info_blob
Make use of a shorter notation to allow the linker to provide
the correct address for pios_board_info_blob.
2011-05-23 18:21:42 -04:00
Stacey Sheldon
6e406c0232 build: remove all remaining use of -DUSE_BOOTLOADER
The USE_BOOTLOADER compile flag was only being used
to determine where the ISR vector table was located.

Provide this explicitly from the linker since it knows
exactly where it is putting the ISR vector table.
2011-05-23 18:21:42 -04:00
Stacey Sheldon
0a67730d0f build: refactor fw, bl and bu rules
- New macros for fw, bl and bu rules in top-level make
- Per-board info factored into make/board/*/board-info.mk
- Per-board info now shared btw. fw, bl and blupd for each board
   - BOARD_TYPE, BOARD_REVISION, BOOTLOADER_VERSION, HW_TYPE
   - MCU, CHIP, BOARD, MODEL, MODEL_SUFFIX
   - START_OF_BL_CODE, START_OF_FW_CODE
- blupd_* goals renamed to bu_*
- all_blupd goal renamed to all_bu
- firmware goals renamed to fw_*, board name goals are preserved
- bu_*_program now writes updater to correct address for all boards
- BL updater firmware builds now produce .opf format including
  version info blob.
- BL updater firmware name now includes board name.
- INS makefile brought up to date w.r.t. linker scripts
2011-05-23 18:21:42 -04:00
James Cotton
ab3127a0ea OP-378 Update the INS Makefile for the new file formats 2011-05-18 14:39:38 -05:00
James Cotton
b7f25ea5d8 OP-378: Get startup script for HD parts working for INS 2011-05-18 13:41:31 -05:00
James Cotton
81b7fb6185 Merge branch 'master' into OP-378_James_INS 2011-05-18 12:50:29 -05:00
James Cotton
dd1e10a15d PiOS/Spektrum: Start swapping to using RTC and calls to PIOS_Spektrum_Get() to
monitor when call Spektrum watchdog
2011-05-18 01:46:00 -05:00
James Cotton
bdf862a712 PIOS/RTC: Add functions to get the rate. Also changed Start to Init to be more
consistent with pios.
2011-05-18 01:45:21 -05:00
Stacey Sheldon
575010169a build: add pios_board_info_blob struct to bootloader flash image
The board info blob is stored in the last 128 bytes of the
bootloader's flash bank.  You can access this data from the
application firmware like this:
  #include <pios_board_info.h>

  if (pios_board_info_blob.magic == PIOS_BOARD_INFO_BLOB_MAGIC) {
    /* Check some other fields */
  }

DO NOT link pios_board_info.c into your application firmware.
Only bootloaders should provide the content for the board info
structure.  The application firmware is only a user of the data.
2011-05-16 08:30:30 -04:00
Stacey Sheldon
29ec2f198b build: convert all app loads to require bootloaders
This change is made up of a number of tightly coupled
changes:
 - Deprecate the use of the USE_BOOTLOADER command-line
   option.  It is now hard-coded in each Makefile.
   Overriding it on the command line is not allowed.
 - Split apart the memory declaration and the section
   declaration in all linker files (*_memory.ld and
   *_sections.ld).
 - Describe the split between bootloader and app sections
   of flash in each board's _memory.ld file.
 - Change program target to selectively erase flash so
   that the installed bootloader is preserved across even
   JTAG programming operations.
 - All elf files are built with debug symbols and are not
   stripped.  This should help debugging with gdb.  The
   images programmed on the boards are all .bin files now
   which do not include symbols.
2011-05-08 12:40:29 -04:00
Stacey Sheldon
18ea93119f build: Add support for BL_Updaters to top-level makefile
New targets:
 - make blupd_all_clean
 - make blupd_all
 - make blupd_openpilot
 - make blupd_ahrs
 - make blupd_coptercontrol
 - make blupd_pipxtreme

These targets are also included in the 'all_flight' target.
2011-05-08 12:40:28 -04:00
sambas
d61f3d4d94 Merge branch 'OP-378_CheBuzz_INS' of ssh://git.openpilot.org/OpenPilot into OP-378_CheBuzz_INS 2011-05-07 18:26:12 +03:00
Corvus Corax
192e31986d PIOS, Modules/FirmwareIAP: Use correct HAL for CPU serial 2011-04-23 18:30:32 +02:00
David Buzz Carlson
876ca3044c Added EKF code. Most of this was bulk copy and paste from the AHRS, so a lot of verification needs to take place. Grabbing sensor data remains untested. 2011-04-20 03:37:50 -07:00
chebuzz
06443b4281 OP-378 - OP/INS - Add initial support for INS. HMC5883, BMP085, BMA180, IMU300 all added. Throrough verification has not been done on any of them. main() simply calls self-test functions on all of the hardware.
AHRS_comms still needs to be implemented.  INS/GPS functionality still needs to be implemented.  Double-check of the new drivers still needs to be done.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3162 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-14 12:46:39 +00:00
chebuzz
7fcde2f248 OP-377 PiOS/BMP085 Update BMP085 driver to be FreeRTOS agnostic
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3161 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-14 09:53:04 +00:00
sambas
3b9e762b69 OP-22 Flight/PiOS: Spektrum bugfix, for other than DX7
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3154 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-11 13:42:32 +00:00
sambas
dabc33c71c OP-22 Flight/PiOS: fix for 11ms framerate, Spektrum supervisor timer must have atleast one interrupt between frames
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3134 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-09 14:51:39 +00:00
sambas
cdfbf8614c OP-22 Flight/PiOS: Spektrum parser handles all known TXs, or atleast should. Test it well before sending aircraft to the sky.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3133 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-09 14:17:23 +00:00
FredericG
fc18f1cb36 OP-326 Long I2C messages starve the other drivers
We where hammered on the head with interrupts that the driver does not need, not allowing the ISRs of other drivers to run 

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3018 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-09 17:12:18 +00:00
FredericG
4c51e80b5b OP-340 I2C NACK causes next transfers to fail.
Needed to clear the NACK flag in the ISR, or the next transfers seem to get a nack too because the IRQ comes back

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3017 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-09 16:58:37 +00:00
FredericG
f6a2584f12 No code change; commented debug-code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3016 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-09 16:52:09 +00:00
sambas
b240915d05 PPM driver cleanup
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3010 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-08 18:52:50 +00:00
sambas
0eeacb44bd PPM driver for OP, first test
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3007 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-08 18:08:13 +00:00
FredericG
6d0679b9e9 Small fix to PIOS_DEBUG_PinValue8Bit(), was also influencing other IO pins
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2975 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-05 12:53:52 +00:00
FredericG
35475820ad 2 new PIOS_DEBUG functions to output a value on the debug-pins. In its current implementation it will probably not work on CC....
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2971 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-05 09:23:57 +00:00
peabody124
ec29920a8d OP-315: Clean up RTC calls into a separate function. Unfortunately still need
to add function headers into portmacro.h

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2942 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 04:28:38 +00:00
peabody124
3e2c542eef OP-315 Use RTC at 65 khz as time base for task switching
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2941 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 04:28:34 +00:00
peabody124
267efe0b88 OP-315: Patch to FreeRTOS port to allow querying the run time for tasks. This
will need to be forward ported (and ideally pushed up stream) for FreeRTOS
updates

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2939 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 04:28:22 +00:00
sambas
d9ad0e9a8f OP-22 Flight/PiOS: Spektrum hacks, doubled supervisor timer and ?loss? counter to the channel8 value
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2907 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-27 19:03:58 +00:00
sambas
8d6f320fca Handle I2C defines better, needed in CC for now
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2815 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-20 07:14:02 +00:00
sambas
f3bce1705b OP-22 Flight/PiOS: Spektrum fix, OP tested on ground not flown yet, CC not tested.
pios_rcinput.[ch] outdated

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2775 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 13:10:02 +00:00
stac
66a9d53d0a hwinit: Convert I2C driver to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2773 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:54 +00:00
stac
3fda65c5d3 hwinit: Convert SPI drivers to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2772 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:50 +00:00
stac
841b0d3d6d hwinit: Convert COM and USART to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2771 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:43 +00:00
peabody124
9ed0882df9 PiOS/USART: Apply same fix as Spektrum to force read of DR whenever there is an
error flag set

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2760 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:52 +00:00
peabody124
7e78e8af04 CC-21 PiOS/Spektrum: Prevent condition that can tie up USART interrupt and locks up
CC.  Must always read the DR to clear the error flags.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2759 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:49 +00:00
peabody124
fedadb1275 CC-8: Move the queue registration into the ADC PIOS driver to allow other
functions to use it easily

Conflicts:

	flight/Modules/Attitude/attitude.c

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2707 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 02:42:43 +00:00
peabody124
c9207b3754 CC-14 PIOS/Servo: Set more than two bank speeds
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2658 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:55 +00:00
stac
880a68a788 uavobj: Convert bootloader-compatible builds to autogen init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2633 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 00:57:24 +00:00
stac
b5426e09d0 uavobj: Convert CC over to use autogenerated uavobjinit
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2631 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-30 22:46:51 +00:00
stac
083e2b01a9 uavobject: Use linker to produce uavobj initcalls
The UAVObject initcall list is now automatically
generated at link time based on the exact set of
UAVObjects linked into the firmware image.

This will allow any subset of UAVObjects to be
used in any firmware image.

The uavobj_initcall() macro automatically adds the
marked function's address into the .initcalluavobj.init
ELF section.

The UAVObjectsInitializeAll() function now simply
iterates over the functions listed in the
.initcalluavobj.init section and calls them.

You can see the contents of this section in the ELF file
like this:
  ./tools/arm-2009q3/bin/arm-none-eabi-objdump \
      --syms -j .initcalluavobj.init \
      ./build/openpilot/OpenPilot.elf

This is fundamentally the same mechanism that the Linux
kernel uses to initialize the specific set of components
that the user has selected in their kernel configuration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2630 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-30 22:46:48 +00:00
sambas
195b63b6bb OP-22 PIOS/Spektrum: Made spektrum input driver, NOT YET TESTED!!!, also preliminary support for CC, sync/supv timer not yet fixed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2602 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 09:25:30 +00:00
edouard
df0b5f9b6c CC-13 CopterControl bootloader first pass. Does not talk on USB for some reason, but starts.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2601 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-27 22:33:13 +00:00
peabody124
00a3e82c70 CC-6 PIOS/SPI: Add semaphore to SPI device structure that can be used to ensure
only one CS line is asserted.  No checks are enforced on this by the SPI code
as I cant see a clean way of it being aware of the CS lines.  We could add
another CS mode those which is driver managed per transfer and has a GPIO i
line for each device.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2579 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:17 +00:00
peabody124
2881370eab OP-291 PIOS/Servo: Refer to channels by TIM_Channel_x to be consistent with PWM
system

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2571 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:54 +00:00
peabody124
99fcd089d4 OP-291 PIOS/Servo: Make the remapping of timers a part of the driver structure
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2569 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:48 +00:00
peabody124
da96ce15b9 OP-256 PIOS/PWM: Converting PWM input to use standard driver structure.
Beginning of unifying the input types into PIOS_RECEIVER.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2568 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:45 +00:00
peabody124
01b09668aa OP-291 PIOS/Servo: Dont need to power up GPIOA/GPIOB in servo since done in sys
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2567 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:41 +00:00
peabody124
607cdcac21 Upgrade FreeRTOS to the latest version (6.1.1) which allows compiling with -Os
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2562 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:26 +00:00
FredericG
70f11543e0 Fixed debugging via Servo PWM pins
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2544 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-23 18:11:47 +00:00
peabody124
65e02eeb25 OP-293 PIOS/ADC: Fixed issue with DMA engine and odd numbers of channels not
accounting for the fact they are transferred in pairs when using ADC2

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2510 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-21 17:18:20 +00:00
peabody124
2d9f7f32d1 OP-291 PiOS/Servo: Converting output to use driver system
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2499 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-21 03:40:21 +00:00
peabody124
21b4e55029 OP-14 OP-16: I2C Improvements
1) Added nack counter monitoring
2) Made timeout for getting semaphore in I2C user space code use the one from
driver and record timeouts.  This does not influence timeouts in the non
FreeRTOS case
3) Remove case block from the error handler so that all bus errors reset the
i2c interface

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2469 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 02:11:12 +00:00
peabody124
0e441a20f3 OP-14 OP-16 I2C: When sending STOP signal after NAK, mask interrupts first
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2468 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 02:11:08 +00:00
peabody124
0d567f4e4b OP-14 I2C: Don't log a NAK as an error and also after NAKs seem to get an event
from the stop bit

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2466 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 02:11:02 +00:00
peabody124
31919241b8 OP-14 I2C: Adding new event to the ignore list
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2465 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 02:10:59 +00:00
peabody124
68536d2fd1 OP-14 I2C: Throw away 0 event in error handler
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2464 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 02:10:56 +00:00
peabody124
c2bdf624e8 OP-269 PIOS/ADC: Previous ADC driver update changed the PCLK2 divider for all
projects which messed up a timer on OP and serial on PipX.  Now this is only
changed for AHRS.  Ideally wouldn't even change for that but then ADC runs too
fast and we get a lot more CRC errors for dealing with all that data.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2459 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 23:00:48 +00:00
peabody124
04a00c7327 OP-269 PIOS/ADC: Change the initialization code to work well when changing
oversampling

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2452 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 16:02:53 +00:00
peabody124
ad7a6e6071 OP-269 PIOS/ADC: Only enable the half and full conversion flag for the double
buffering

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2451 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 16:02:50 +00:00
peabody124
0259b6d1f1 OP-269 PIOS/ADC: First part of conversion to driver structures
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2444 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 02:45:39 +00:00
peabody124
81b0c3fdb6 OP-269 PiOS/ADC: Moved AHRS ADC code to PiOS and made all the projects use it
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2440 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 02:45:22 +00:00
zedamota
ad0b3e911d OP-268/PipX Bootloader - Changed Timers for MD device, auto memory space fetching (as per people request ;)). Stripped unused functions to reduce size.
TESTED WORKS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2431 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 15:33:24 +00:00
peabody124
ad7a4cded0 OP-265 PIOS/USB: Put USB buffer size in the board file
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2428 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 02:15:19 +00:00
peabody124
8a32d88b10 OP-265 CC: More work to get it running
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2425 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:47 +00:00
peabody124
f0c36b13a4 PiOS/USART: Use the buffer size defined in the board file
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2421 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:37 +00:00
peabody124
79caad654b CopterControl: Don't need altitude sensor support
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2418 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:30 +00:00
peabody124
07798bb2db PIOS/WDG: Add back the returned delay for code that wants to clear WDG more
rarely

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2403 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 19:01:33 +00:00
zedamota
691c58a583 OP-268/PipX Bootloader - Changed the size of BL def.
New naming convention for the linker files:
link_(board_name)_(density)_(bl usage).ld

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2401 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 17:34:22 +00:00
peabody124
d846288cec OP-14 I2C: Remove delay in I2C IRQ handlers
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2378 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-11 03:50:23 +00:00
peabody124
bbbd9a10e3 OP-14 I2C Diagnostics: Improve the logging so that the events going into FSM
are logged, and separately the erirq and evirq logs are exported

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2368 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-10 05:42:53 +00:00
peabody124
b173d74821 OP-237 I2C ESC support. This _will_ require you to reconfigure your
ActuatorSettings although for PWM aircrafts it should be done exactly as before

Actuator: Store the update times and maximum update time

OP-14 I2C: Start tracking short history of events and states in driver for
logging
OP-237 Flight/Actuator: Support for I2C based ESCs

OP-237 MK_ESC: Send all four motors as one atomic transfer

OP-237 Flight/Actuator: Allow channels to be mapped to MK I2C interface.  Currently
mixer channels are either PWM or MK but in the future this will change to
support more than 8 channels.

OP-16 PiOS/I2C: Further work to try and make I2C more stable, mstly special case
handline in IRQ

OP-237 I2C ESC: Support for Astect 4 channel ESCs

OP-237: When the I2C Actuator write update fails track this

OP-237 Actuator Settings: Change the way motor types are selected to keep that
information more appropriately within ActuatorSettings instead of MixerSettings

Also make motors stay at or above neutral when armed and throttle > 0

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2366 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-10 01:11:44 +00:00
peabody124
ed11e64bb2 OP-251 Watchdog: Get rid of the old extra watchdog module and instead have
tasks directly update a flag for each module (which they register) and when all
flags set clear the watchdog then.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2365 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-10 00:16:30 +00:00
peabody124
5734e1f437 OP-176 PIOS/ADC: Decrease the priority of the ADC DMA/IRQ
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2360 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 20:49:43 +00:00
peabody124
0175e25ddf Flight/ADC: If there is a DMA error for the ADC transfer dont copy those values
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2359 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 20:49:39 +00:00
peabody124
0f07d7f671 OP-240 OP-176 Flight: Setting the priority group back to 4 (anything higher
priority preempts) and adjusting the priorities around to be more sensible.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2355 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 20:49:26 +00:00
peabody124
d8022a320d OP-238 PiOS/USB: Fix for problem Ed's being see where being plugged into usb
but not having telemetry causes a reset.  If the buffer got full enough it
would never start to transmit again.

Note: also making Telemetry non-blocking

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2346 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-08 08:05:02 +00:00
edouard
3bad347386 Reverted a change which caused resets on the MB under certain conditions. Should be back to normal now.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2311 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-30 19:24:57 +00:00
sambas
0b2a0884ae OP-22 Flight/PiOS: Spektrum improvements, removed my zero throttle glitch
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2306 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-28 18:37:36 +00:00
peabody124
7ab6dfeeba PiOS/USB_HID: Lower priority of USB interrupt
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2280 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-24 17:16:07 +00:00
peabody124
1142b1fb1e PiOS/USB_HID: No longer clear buffer after getting a NAK. This was required
before because if transmission got NAK then sending would stop.  Now the next
time data is added to the buffer a new send will be attempted.

fifoBuf: in clearData just set the read pointer to the write pointer.  This is
safer for multiple people accessing it assuming the reader will be clearing it.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2279 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-24 17:16:04 +00:00
peabody124
ba8351f60a PiOS/USB_HID: When using FreeRTOS use a sempahore to stop multiple tasks
pushing data to the transmit buffer

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2278 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-24 17:15:59 +00:00
zedamota
14ef24a3de OP-21/Bootloader - Maximize flash space available for user code. Bring back delay on HID send (board->pc) it still hangs when blasted with data. AHRS is now Readable.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2263 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-21 17:25:24 +00:00
peabody124
f010502229 PiOS/I2C: Was throwing out repeated byte transmitted events but this is
required for longer sequences,  Need to deal with when it happens
inappropriately better.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2245 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-18 07:09:34 +00:00
peabody124
af99c31a61 PiOS/I2C: Fixed typo and also the values for I2C Diagnostics when disabled.
Enabled by default though.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2243 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-18 07:09:28 +00:00
zedamota
917f03121d Fixes a problem with the reset function introduced on the new ST libs migration, it was preventing the user space reset used with the bootloader to function properly.
I think someone still likes to honor his avatar :)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-17 14:16:58 +00:00
peabody124
4b4a66c2d7 PiOS/I2C: Lots of small changes. Added a few weird bus events that are
sometimes thrown, and made errors not lock it up by default.  It works for me,
but since this has historically been associated with lots of lock ups please
check your systems carefully.

PiOS/I2C: Make the bus by default try to recover from errors instead of locking
up

PiOS/I2C: After a bus error and clocking all previous data create a STOP
condition to make sure bus is released (note, this also requires creating a
START condition first)

PiOS/I2C: If the same event hits the I2C bus twice in a row then disregard
second one, there is no situation where we should get the same event multiple
times that matters and this gets us out really quickly to catch the real
events.  I was seeing this with repeated 0x70084 which means byte transmitted.
This is related to STM32 bugs in the IRQ timings I believe.

PiOS/I2C: 1) Mask out some bits we don't care about in the event flags
2) Don't lock up if the give semaphore fails, although why it does is strange
3) Recover from bus failure through the "auto" state path instead of just
coding state

PiOS/I2C: Change the reset bus code to follow
http://www.analog.com/static/imported-files/application_notes/54305147357414AN686_0.pdf
(thanks for the reference Neontangerine).  Although this may actually NOT clear
the bus the first time through, subsequent bus errors should eventually clock
it out.  The up side is it is less likely to clock a bunch of 1s into an ESC
and make it run up.

PiOS/I2C: Some cleaned up code for getting a snippet of the history when
something strange happens

PiOS/I2C: Export logging information from I2C through a UAV object

PiOS/I2C: Improve the diagnostic information

PiOS/I2C: Need to handle the event 0x30084.  This seems to happen between a
byte transmitted and new byte started

PiOS/I2C: Handle the NACK condition by simply going to the stopping state.

PiOS/I2C: Add a new NACK state to handle sending the STOP signal after a NACK
following the STM documentation.  Other error conditions still are not dealt
with.

PiOS/I2C: Should handle the NACK condition from all the write cases.  Need to
think about read cases

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2239 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-17 07:01:58 +00:00
peabody124
36ea75bc0d Flight/HID: Change how the HID code handles the transmit buffer getting empty
and starting transmission again.  This should address the bootloader locking up
on verify.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2235 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-14 01:43:16 +00:00
peabody124
1086a6b567 Flight: Changes to STM library to work with our code. Basically all the
configuration structures are const which keeps them in flash instead of ram.
However the library needs to declare them const for the compiler to work.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2231 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-13 07:03:28 +00:00
peabody124
18858571ce Flight: Updated to the latest StdPeriph libraries
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2230 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-13 07:03:24 +00:00
pip
0cae6df8b0 Aligned fifo buffers to 32-bit for possible speed improvement.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2173 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-28 11:06:45 +00:00
pip
d4c24de556 Updated to use the new fifo_init function
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2172 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-28 11:00:20 +00:00
peabody124
cfbdad5e0d Flight/USB_HID: Change to deal with buffer filling up when GCS not ACK'ing the
usb transmissions.  Clear TX buffer after any NAK.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2147 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 19:29:10 +00:00
peabody124
e89911bb8a OP-203 PIOS_USART: Don't disable interrupts for receive buffer since
only one receive task.  This is less generally safe but decreases the
frequency of resets in our current configuration

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2144 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 17:13:49 +00:00
peabody124
a454f06bf8 OP-203 PIOS_UART: Tweaked the way the interrupts are reenabled to get comms
stable again

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2143 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 17:13:48 +00:00
peabody124
300a3bc8ad OP-203 PIOS_USART: Get TX buffer using fifo_buffer
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2142 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 17:13:46 +00:00
peabody124
e3dd542609 OP-203 PIOS_USART: Make USART Rx code use fifo_buffer
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2141 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 17:13:44 +00:00
osnwt
ed49f7fc40 Prevent some compiler warnings treated as errors during RELEASE build (possible use of uninitialized variables - CodeSourcery under Windows build system). It may be done with some #pragma as well, but this way is more portable.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2132 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-21 13:09:05 +00:00
sambas
c74c9cc08e OP-73 Flight/PiOS: deinits started, still just for review
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2107 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-11 20:38:44 +00:00
sambas
f94dc41712 OP-73 Flight/PiOS: runtime RC input change, initial files just for review, not integrated to build yet
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2106 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-11 19:09:39 +00:00
peabody124
42a02e5662 Flight/HID: USB priority to 8 instead of 1. Probably Need to make the HID layer use a
similar driver format to the PIOS_USART system.  (p.s. are you happy now, PT?)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2029 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-28 15:07:07 +00:00
peabody124
b9f74a86c3 OP-198 Flight/Libraries: Swap to using circular buffer code from Pip because it
supports thread safe write/read simultaneously

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2027 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-28 14:30:03 +00:00
peabody124
0bdaf4d0df OP-197 Flight/USB: Make non-blocking send return -2 instead of -1 for not enough space
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2026 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-28 14:30:00 +00:00
peabody124
acc6df4c2d Flight/USB_HID: Make the userspace command wait until not in interrupt before
running and block the interrupts while modifying the buffers

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2003 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-24 01:35:30 +00:00
peabody124
cd04845c3d Flight/HID: NAK instead of stall USB bus (former was mistake) and change
polling time to 4 ms

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1996 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-20 05:21:25 +00:00
dankers
4ed3359f6f Comment was misleading.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1992 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-19 17:25:07 +00:00
les
498f3d0fa6 PIOS SPI: Added a function to detect if the channel is busy
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1829 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 16:52:20 +00:00
sambas
2d90a80e22 Flight/PiOS: this patch makes dosfs work with both MBR and VBR formats. Backup your SD files in case this messes something!! Testing needed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1798 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 16:29:38 +00:00
kokomojoe
6f1f990d85 OP-21 AHRS/Bootloader - Moved start of user code to 0x08002000. Must be used with latest AHRS Bootloader compiled with DEBUG=OFF.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1788 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-28 02:21:48 +00:00
peabody124
3c021c09d9 Flight/PiOS: Whitespace changes
find ./flight/PiOS/inc/ \! \( -name '*~' -a -prune \) -type f    | xargs -I{}
bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss -ncs -cp1
-il0 -hnl -l150 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1777 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 07:28:45 +00:00
sambas
24840b461d OP-22 Flight/PiOS: added failsafe and recovery "watchdog" timer
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1697 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-20 18:00:31 +00:00
zedamota
3ba6372dc4 OP-21/Flight Bootloader - Clean up and linker files for the AHRS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1691 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-19 18:27:53 +00:00
peabody124
a6ca5b82e7 OP-155 Flight/HID: Make the HID stall when buffer full. Not sure the consequences on ground (i.e. if it handles the stall correctly)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1665 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 20:23:02 +00:00
peabody124
110c46216e OP-155 Flight: Increase the pios_com buffer size to support these larger objects. If this gets worse and we don't want to use as much OP memory we can make it stall the USB bus when the buffer is full.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1657 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 05:57:03 +00:00
stac
0e7a801e9e hmc5843: Add support for DRDY signal from magnetometer
The DRDY signal from the magnetometer is connected to PB8
on the STM32.  This pin is now configured as an external
interrupt and is now used to signal when new data is
available from the magnetometer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1628 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:21:02 +00:00
stac
88e73906d0 i2c: Add recovery code for i2c bus errors
I2C bus errors are now recoverable.  The bus is properly reset
and an error indication is now provided to the caller whenever
a bus error occurs during processing of the transaction list.

For now, the users of the I2C layer just retry infinitely on
failure.  The BMP085 and HMC5843 code should be changed to
report errors to its callers to allow a more sensible retry
strategy.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1625 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:57 +00:00
stac
0122394481 i2c: consolidate handling of AUTO transitions
AUTO transitions in the FSM are now handled immediately
after processing each newly injected event rather than only
at the end of the EV ISR.

This consolidation allows the upcoming addition of event
injection from both the EV and ER ISR contexts.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1624 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:56 +00:00
stac
7d5463e5e6 i2c: Move polling for bus stopped from ISR to task/mainloop
Occasionally, the I2C driver races with the STM32 I2C peripheral
at the end of a bus cycle.  This leaves the bus in an errored
state and the stop condition is not properly asserted on the bus.

The polling for the stopped condition was previously implemented
in ISR context since it was expected to be nearly instananeous.
In the error condition, however, the stop condition will never
happen.  The polling for this case is now done by the initiating
task (or mainloop on the AHRS) to prevent the timeout condition
from triggering the watchdog.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1623 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:55 +00:00
stac
85c60479c1 i2c: rename FSM faulted state
Differentiate the _FSM_ faulted from the (soon to
exist _BUS_ faulted state.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1621 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:52 +00:00
pip
cc3860daaf Added 'uint32_t PIOS_SYS_getCPUFlashSize(void)' into pios_sys.c/h files.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1616 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-14 09:18:55 +00:00
zedamota
66560786f4 Flight - #ifdefs to make it work with both normal and bootloader packet formats.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1609 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-13 17:08:52 +00:00
pip
d0b8a9755d Added USB_LED_ON/USB_LED_OFF and checks to see if they are defined to the PIOS_USB_HID_ChangeConnectionState function ..
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1596 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 10:47:20 +00:00
pip
9fca16db41 Added an RTOS detection is 2 places because I'm using this file on the modem (without an RTOS). #if defined(PIOS_INCLUDE_FREERTOS) ...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1595 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 10:33:45 +00:00
peabody124
b853c392f3 Flight: Was only returning half of the serial number (thanks for catching that Pip)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1476 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-31 02:33:47 +00:00
pip
7813414f29 added casting to prevent int overflows when calculating the watchdog delay
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1467 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-30 16:48:33 +00:00
pip
ba5f1b37ee changed pios watchdog from 8-bit to 16-bit ms capability, plus moved the .h file from the .c folder into the inc folder
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1466 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-30 16:29:36 +00:00
peabody124
8dd81443be OP-122 Flight: Same changes regarding 62 byte limit applied to the receiving code on the device.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1405 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-25 05:32:56 +00:00
peabody124
dd491160c5 OP-121 OP-122 Flight: Improved the Blocking/Nonblocking behavior for USB to be correct. I'd like a mutex still around the transmission buffer but don't want to slow down the interrupt.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1404 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-25 05:32:54 +00:00
peabody124
4ca10e92c7 OP-121 OP-122 Flight: Improved USB HID communication.
1. Added reenumeration function and call it on USB init (device will appear after reprogramming now)
  2. Moved buffer.c to general flight/Libraries location
  3. Removed the 62 byte transmission limitation by adding a transmission buffer
  4. Sped up USB communication by increasing endpoint polling frequency

Note, that the nonblocking and blocking USB send functions are not blocking entirely correcting.  The blocking calls the nonblocking, and the nonblocking blocks until the last chunk has started tranmission if it's a big transmission.  The buffering I added would generalize to non-blocking nicely, but would require using the EP1(IN) callback to handle most of the tranmission.  This creates a lot of issues if one function is pushing data onto the buffer and the interrupt is sending.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1403 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-25 05:32:52 +00:00
zedamota
b0d1d0dd09 OP-21/Flight Prep work for the USB HID bootloader
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1373 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 18:54:57 +00:00
stac
47c36b3da0 i2c: fix error in FSM for restarted reads
The transition from the ADDR state to the read state
was broken for non-final reads.  The FSM diagram was
also wrong for this transition.

Since reads are always the last transaction in a sequence
in our current usage, this doesn't actually fix any known
bugs.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1350 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:06 +00:00
stac
98822bff98 i2c: force bus free on warm starts
Since the i2c bus is bidirectional, there are certain
states (eg. part way through a read) where the slave
device is in control of driving the SDA line.

On a cold start (power on), the slave devices are all
quiescent and will not drive the bus.  However, on a warm
start (eg. watchdog or jtag restart), it is possible that as
the CPU boots, the slave device may be holding the SDA line
low.  This is a bus busy condition and will prevent the I2C
bus master in the CPU from being able to seize the bus during
init.

The fix for this is to clock the i2c bus sufficiently to ensure
that the the slave device finishes its transaction and releases
the bus.

Once the slave has released the bus, the bus master can properly
initialize and assert a STOP condition on the bus.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1349 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:02 +00:00
peabody124
2031cfe4d0 OP-119 AHRS: Added error counters for the messages as well as changed an error on AHRS echo back for the HomeLocation message.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1344 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-20 22:52:13 +00:00
FredericG
b46bc68e96 "addr" field of I2C transaction struct now takes real I2C address, and not address that is pre-shifted to accommodate the R/W bit
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1321 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 10:04:55 +00:00
peabody124
a084d21804 Merge branch 'watchdog'
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1281 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-13 05:18:17 +00:00
stac
f74c6ffdd5 i2c: rewrite i2c layer
The STM32 I2C block has a number of errata associated with it.
These errata are primarily related to timing sensitivities between
the peripheral and the interrupt handler.  In particular, the
correct generation of the stop bit relies on the I2C IRQ running
immediately and not being held off for any reason.

NOTE: The I2C interrupts must be the highest priority IRQs in the
      system to ensure correct operation.

I2C protocol is now implemented as a formal state machine.
See: stm32_i2c_fsm.{dot,jpg} for FSM description.

I2C init is now expressed by const initializers in pios_board.c
for both OP and AHRS boards.

I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays
of an unlimited number of bus transfers to be done atomically.
The I2C adapter driver now handles all bus-level locking across the
list of transactions.  Generation of start/restart/stop conditions
are handled automatically over the list of transactions.

Timeouts have been removed from the API for now.  May be added
back later.

This driver has run error free on both the OP and AHRS boards for
up to 48hrs but it still sometimes fails earlier than that on the OP
board.  There is another possible set of improvements to the driver
that could employ the DMA engine for transfers of >= 2bytes.  This
change would reduce the timing sensitivities between the peripheral
and the driver but unfortunately, both the SPI and I2C interfaces
share the DMA1 engine.  That means only one of these two peripherals
can use the DMA engine and right now, SPI between OP and AHRS is
already using it.

Failures are currently fatal and will lock up the CPU.  This allows
useful information to be obtained in the failure cases.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:15:08 +00:00
stac
b6c1f43145 i2c: Change API to allow passing const config data
Mark the I2C_InitStruct parameter as const so that we can pass
const data as the initializer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1240 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:58 +00:00
peabody124
0fdfbb2ffb Deleting old USB code that I meant to delete a while ago. Also changed names of some functions to OP. Finally fixed the USB taking over PIOS telemetry. Detects the USB cable and that the configuration has been taken by the USB bus.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1217 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-05 23:43:52 +00:00
sambas
7f6336d324 OP-22 Flight/PiOS: Spektrum reworked, input is mapped to old aux in receiver connector, works nicely with calibration plugin. Also bind works, just needs config flag to bind on powerup
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1189 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-01 10:34:07 +00:00
peabody124
7e6afe5a75 Updated HID code to do packet processing in OS indepdent layer. Should now work on all platforms. Please test and get back to me. Maximum object size of 62 bytes currently.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1174 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 18:55:04 +00:00
peabody124
6f63c10dca Removing more debugging comments
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1168 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 23:48:12 +00:00
peabody124
3144e3157c Added back checks on USB cable so falls back to serial telemetry if not plugged in
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1167 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 23:11:28 +00:00
peabody124
27bcd20882 HID working on Mac for telemetry. Need to tweak GCS code for Win/Linux
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1166 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 20:50:20 +00:00
peabody124
dac82b3c17 Getting closer for HID. Now a well behaved HID device. Just need to update GCS plugin for new data format and make PJRC wrappre work properly on Mac
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1165 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 19:09:55 +00:00
peabody124
27d429fe18 Got better HID report design with valid data length embedded in report
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1164 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 17:41:56 +00:00
peabody124
fe616df48d Further tweaks. Will start trying to get reliable communication with larger report size tomorrow
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1159 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 07:56:50 +00:00
peabody124
840f7ff456 A version of the firmware that successfully Acks back and forth over HID. Still need to refine the PIOS interface and make GCS strip out the report ID data (if necessary). Also note: currently if you run too many modules the watchdog timer kicks in. I haven't determined if this is due to an interrupt binding up or what (and why it doesn't happen more often since I can't find any code that explicitly resets the WWDG).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1157 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 06:22:34 +00:00
peabody124
d89cd43cd1 Further tweaks to the HID update
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1156 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 05:28:04 +00:00
peabody124
c46dcea73a Pretty major update of the USB HID core. Removed a lot of old code related to custom drivers and BSL (which will be brought back under HID). Device enumerates but still not communicating. Hopefully nothing broken, lots changed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1155 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 03:19:07 +00:00
peabody124
d928676f5e More documentation updates, standardizing format to include addtogroup at the beginning of headers so files are associated with modules
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1121 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 19:53:35 +00:00
peabody124
99e94228a9 More doxygen updates
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1106 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 05:31:11 +00:00
vassilis
9f2a01a78a Flight/Servo Fix Servo driver buffer overflow, was messing up the I2C and altitude readings, now working fine. Servo index used to be 1-8 but the Servo driver was indexing a buffer out of bounds. Changed everything to use index 0-7 for servo outputs.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1061 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 01:54:43 +00:00
stac
a3a2dbd634 spi: Add support for hardware CRC generation/checking
PIOS SPI devices may now make use of automatic CRC generation
and checking on block transfers.  Only supports CRC8 for now.

Since the SPI interface CRC calculation continues across message
boundaries (ie. not reset on every transfer), we must manually reset
the CRC registers for every transfer to allow the two sides of the
link to resynchronize.

Unfortunately, resetting the CRC registers requires disabling the
SPI peripheral which must now be done on every block transfer.

Note: The last byte of the tx buffer is never sent and is assumed to
      be a place holder for the tx CRC8.
Note: The last byte of the rx buffer is expected to hold the rx CRC8.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1011 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:42 +00:00
stac
c12b7e3fed spi: tx buffer is now const
Tx buffers should not be modified.  This allows passing const data
to the transfer function.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1010 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:40 +00:00
stac
71e491e3c1 com: mark tx buffer as const throughout API
The com layer transmit functions should provide guarantees
that they will not modify the buffer that you're transmitting.
Declaring the parameter as a pointer to const keeps the underlying
implementations honest.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1001 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:08 +00:00
stac
4f8d81343f spi: assert on invalid SPI device
TransferByte API is simplified to either assert or
return the rx byte.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@999 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:00 +00:00
dankers
0d38dfc745 Minini removed from PiOS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@966 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-01 08:57:40 +00:00
FredericG
3bc938d45e lowered I2C timoout whne using RTOS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@842 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-21 09:19:02 +00:00
FredericG
c8f818a809 Do not configure the servo outputs when ENABLE_AUX_UART
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@839 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 18:02:26 +00:00
stac
20fa15c24a spi: fix block transfers
SPI block transfers were broken in commit r759.  Block
transfers are primarily used by the SD card interface so
this also broke accesses to the SD card.

SD card accesses should be fixed now.  Verified by writing
config objects in the GCS and confirming that they survived
a reboot of the OP board.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@808 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-18 04:28:32 +00:00
stac
771a56ca9d com/usart: generalize com driver API
- Created a pluggable COM layer
- Converted COM + USART init into static initializers
  rather than typedefs
- Generalized the USB HID COM API to match the USART
  API.
- Changed USART and COM layers to be data driven rather
  than #ifdef'ing/switching on the specifics of each port

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@760 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:24:26 +00:00
stac
8d015a57d0 pios spi: support both master and slave configs
Added support for SPI slave configurations to the pios SPI layer.

Converted the board specific configuration for the PIOS SPI layer to
use const static initializers rather than #defines (see pios_board.c).

SPI interface between the OP board and the AHRS is now operational at
a basic level, capable of moving simple single byte messages between
boards.  Multi-byte, CRC protected messages will be added on top of this.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@759 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:23:44 +00:00
stac
02e0017cbb stm32 lib: declare read-only parameters as const
Many of the STM32 library functions take a pointer to an
initialization structure.  In nearly every case, this struct
is a read-only (ie. const) parameter.

It is advantageous (and good coding practice) to actually declare
read-only data as const so that the compiler can place the const data
in the .rodata section which resides in flash and doesn't consume any
RAM.  This has the added bonus advantage that it is impossible for the
running application to corrupt the read-only data.

In order to allow passing pointers to const data into the library
functions, it is essential that the function prototypes also declare
their associated read-only parameters as const.  This commit adds
the const attribute to those parameters that are actually read-only.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@758 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:23:15 +00:00
stac
aebc358e46 usart: use macro definitions for bit positions
No functionality changed.  Clean up only.

Changed a few of the (1 << x) constructs to use existing macro
definitions to improve code readability.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@757 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:22:57 +00:00
stac
8b5e1e8aea init cleanup: use irq stack during early init
No functionality changed.  Clean up only.

Make early init code (Reset_Handler) use the existing irq stack
rather than the hard-coded one.

Remove (now) unused references to the hard-coded stack.

Removed the link-time check for a minimal task stack in RAM since
FreeRTOS allocates user stacks from the heap which is already reserved
in the .bss section (as symbol xHeap).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@756 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:22:47 +00:00
fredericg
a2beb49257 Changed PIOS_DEBUG_Panic()
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@694 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-31 16:22:58 +00:00
stac
140a51932f spi: fix cut/paste error for AHRS SPI setup
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@669 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-27 01:37:43 +00:00
stac
918250868b irq_stack: correct one word overlap of _irq_stack_top
The previous fix in r652 was _almost_ right.  There was
still a one word (4-byte) overlap between _irq_stack_top
and the start of the data segment.

_irq_stack_end + _irq_stack_size leaves the '.' pointer at
the word immediatly after the stack.  This commit corrects
this error and places _irq_stack_top on the last word
_inside_ the reserved space for the irq stack.

[Before]
  $ ./tools/arm-2009q3/bin/arm-none-eabi-nm -n ./build/openpilot/OpenPilot.elf
  ...
  20000000 A SRAM_BASE
  20000000 B _irq_stack_end
  20000400 d LED_GPIO_PORT   <--- overlap
  20000400 B _irq_stack_top  <--- overlap
  20000400 D _sdata
  20000408 d ADC_GPIO_PORT
  ...

[After]
  $ ./tools/arm-2009q3/bin/arm-none-eabi-nm -n ./build/openpilot/OpenPilot.elf
  ...
  20000000 A SRAM_BASE
  20000000 B _irq_stack_end
  200003fc B _irq_stack_top
  20000400 d LED_GPIO_PORT
  20000400 D _sdata
  20000408 d ADC_GPIO_PORT
  ...

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@668 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-27 01:37:40 +00:00