rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-02 10:24:11 +01:00
Code Issues Releases Activity
8,278 Commits 5 Branches 8 Tags 266 MiB
17a687e79d
Commit Graph

1132 Commits

Author SHA1 Message Date
James Cotton
2191befe17 Merge remote-tracking branch 'revo/brian/rfm22_rf2' into revo 
Conflicts:
	flight/PiOS/Common/pios_rfm22b.c
 2012-10-05 08:20:35 -05:00
Brian Webb
5724fa083c RFM22B: Added link quality calculation based on number of dropped packets. Also added packet error correction, which apparently wasn't being done before. 2012-10-04 21:11:40 -07:00
Brian Webb
2541affd80 RFM22B: Added back configuration of the RF Power and RF Datarate. Also added setting of the destination ID in the rfm22b driver. 2012-10-04 16:39:07 -05:00
James Cotton
13cabd2ea4 Merge branch 'next' into revo 
Conflicts:
	flight/PiOS/Common/pios_rfm22b.c
 2012-10-04 16:38:08 -05:00
Brian Webb
9b9d0c0d1e RFM22B: Added back configuration of the RF Power and RF Datarate. Also added setting of the destination ID in the rfm22b driver. 2012-10-03 20:03:35 -07:00
Brian Webb
36437f695f RFM22B: Moved radio status reporting from the radio module into the rfm22b driver task. 2012-10-03 11:35:02 -05:00
James Cotton
a39cbdbcb1 RadioBridge: Send data from UAVTalk non blocking, otherwise it can lock up the packet handler. 2012-10-03 10:43:18 -05:00
Brian Webb
a8590045a8 RFM22B: Moved radio status reporting from the radio module into the rfm22b driver task. 2012-10-02 19:52:21 -07:00
James Cotton
879dfed288 RM2/RM1: Make the firmware and bootloader support the pin mappings between these two targets 
for USB and radio

A side-effect of this is the pipxsettings are no longer populated into the rfm22b cfg structure
as that was made constant to be consistent with other drivers.
 2012-10-02 09:31:15 -05:00
Laura Sebesta
8997df2438 Merge branch 'next' into kenz/diag_stack_split 
Conflicts:
	flight/Modules/Stabilization/stabilization.c
 2012-09-27 19:29:23 +02:00
James Cotton
d2842169ee Sensors: Need to support MPU6000 for revision 3 2012-09-26 04:04:48 -05:00
Brian Webb
a070e1cc3e RFM22B: Added PIOS_RFM22B_Receive_Packet function and removed rx buffer. 2012-09-23 08:36:38 -07:00
Brian Webb
a46e3cdec3 RFM22B: All outgoing data to the radio is now going through the PIOS_RFM22B_Send_Packet call. Also removed all global variables with the exception of the rx buffer. 2012-09-22 20:13:11 -07:00
Brian Webb
057227726b Radio: Make sure pios_packet_handler is set to 0 when radio module is not initialized. 2012-09-22 20:13:07 -07:00
Brian Webb
6623c55846 RFM22B: Moved ISR processing thread into the rfm22b driver. 2012-09-22 20:13:03 -07:00
Brian Webb
432a6dfd00 RM: Fixed crashing when radio module is disabled. 2012-09-22 20:13:02 -07:00
Stacey Sheldon
754f58c33a Merge remote-tracking branch 'op-public/next' into revo-next 
Conflicts:
	flight/Modules/ManualControl/inc/manualcontrol.h
	flight/Revolution/Makefile.osx
	ground/openpilotgcs/src/plugins/plugins.pro
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	ground/openpilotgcs/src/plugins/uploader/uploadergadgetwidget.cpp
	shared/uavobjectdefinition/flightstatus.xml
	shared/uavobjectdefinition/hwsettings.xml
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-09-16 09:56:35 -04:00
James Cotton
13e7733e5f Merge branch 'revo-mini' into revo 2012-09-12 02:30:10 -05:00
James Cotton
223a3473c2 Merge branch 'next' into revo-mini 2012-09-12 02:03:39 -05:00
James Cotton
4717c376c0 Stabilization: For the inner loop call the setpoint shaping version so that 
the derivative term can weight the sticks and gyros independently.
 2012-09-11 13:21:53 -05:00
James Cotton
11b099b1ef Stabilization: Add configuration terms for the derivative calculation to the UAVO and pass 
them in to the PID system.
 2012-09-11 12:29:38 -05:00
James Cotton
86422b8b9e VtolPathFollower: Make sure to clear the alarm when running so it doesn't show as 
uninintialized
 2012-09-11 02:34:31 -05:00
James Cotton
88b483f37d PIOS_MPU6000: Make the driver perform the rotation to bring it into the OP 
coordinate system

Previously there were hacks spread throughout to deal with various ways of
positioning the chips.  Now the driver structure specifies the rotation
of the chip relative to the board layout and the output X/Y/Z are already
in OP convention.

This flag seems to do the right thing for Revolution, CC3D, and RevoMini
 2012-09-11 01:46:22 -05:00
a*morale
cf7aea6499 Support for Led Outputs as actuator channels 9&10. 
Added the ARMING LED  and INFO LED option for actuator channel
 2012-09-10 20:14:24 -05:00
James Cotton
aaaf23e64c ManualControl: Cover the case for PathPlanner to avoid setting an alarm. No functional change. 2012-09-10 20:12:58 -05:00
James Cotton
5211176f15 ManualControl: Cover the case for PathPlanner to avoid setting an alarm. No functional change. 2012-09-10 20:12:23 -05:00
James Cotton
38e9d105aa Merge branch 'pidt1' into test2 
Conflicts:
	flight/Modules/ManualControl/inc/manualcontrol.h
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	shared/uavobjectdefinition/flightstatus.xml
	shared/uavobjectdefinition/hwsettings.xml
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-09-10 14:37:52 -05:00
James Cotton
386a9d41ef Merge branch 'next' into test2 
Conflicts:
	ground/openpilotgcs/src/plugins/config/configrevowidget.cpp
	ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
	ground/openpilotgcs/src/plugins/uavobjects/uavobjecttemplate.m
 2012-09-10 14:29:26 -05:00
James Cotton
9763a70364 Merge remote-tracking branch 'origin/igor/pidt1' into relay_tuning 
Conflicts:
	flight/Modules/Stabilization/stabilization.c
 2012-09-10 03:10:26 -05:00
Igor Van Airde
8ca99739ed Changed rate controller from PID to PIDT1 to improve flight stability. 
Low pass on D-Term makes the D-Term usable to improve flight stability.
Affects rate and stabilize mode.
 2012-09-09 13:07:25 +02:00
James Cotton
f3f07682ac RFM22b radio.c: Increase the stack side for the status task which runs the ISR 2012-09-08 12:43:01 -05:00
James Cotton
1f0004e9db RFM22b: Abstract out the port into the driver initiation 
Also use a separate function to claim the bus semaphore and
assert the CS line.
 2012-09-08 12:38:54 -05:00
Werner Backes
4803dfe99c Fix: yaw bias correction wasn't applied on CC3D. 2012-09-06 13:13:58 +02:00
James Cotton
2f65fc1e8e Merge branch 'next' into relay_tuning 
Conflicts:
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-09-04 10:43:04 -05:00
James Cotton
113c3d3b76 RM Telem: Make sure it properly tracks the outgoing rate of bytes 2012-09-04 10:20:51 -05:00
James Cotton
61ff335eaa RFM22: No need to poll the ISR from two tasks in radio.c 2012-09-02 22:44:58 -05:00
Brian Webb
27fedee3d3 Just return an initialization failure in the radio module when the RFM22B fails to initialize rather than asserting. 
Signed-off-by: James Cotton <peabody124@gmail.com>
 2012-09-01 19:15:13 -05:00
James Cotton
d9ec6454c2 PipX: Since we are calling the PipX ISR from user space looks ensure the frequency stays correct. 
Previously it was polling too fast and the PipXStatus was incorrect as a result.  Now make
sure the stats loop only runs at 500 ms.
 2012-09-01 19:13:11 -05:00
James Cotton
c9f66f5145 Merge branch 'revo' into revo-mini 
Conflicts:
	androidgcs/AndroidManifest.xml
	androidgcs/res/layout/gcs_home.xml
	androidgcs/res/values/strings.xml
	androidgcs/src/org/openpilot/androidgcs/AttitudeView.java
	androidgcs/src/org/openpilot/androidgcs/HomePage.java
	flight/PipXtreme/System/pios_board.c
	ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
	shared/uavobjectdefinition/taskinfo.xml
 2012-09-01 16:57:27 -05:00
James Cotton
6bfb2a5e45 Merge branch 'next' into revo 
Conflicts:
	ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/mapgraphicitem.cpp
	ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/mapripper.cpp
	ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/waypointitem.cpp
	ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/waypointitem.h
	ground/openpilotgcs/src/libs/utils/coordinateconversions.cpp
	ground/openpilotgcs/src/libs/utils/coordinateconversions.h
	ground/openpilotgcs/src/plugins/opmap/opmap.pro
	ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
	ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.h
	ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
	shared/uavobjectdefinition/taskinfo.xml
	shared/uavobjectdefinition/waypoint.xml
 2012-09-01 16:18:03 -05:00
James Cotton
f3327e3993 RM: Enabled optional modules and got the battery module working again. 
Changed the hardcoded (ick) battery lines for RM.  Also removed the reference
to PIOS_ADC_GetPin(4) as that pin is no longer available.  Finally
changed the default FlightBatterySettings to work out of the box
for the standard recommended sensors.
 2012-09-01 11:03:32 -05:00
Brian Webb
6b3934576a Fixed configuration of PipX com port as UAVTalk. 2012-08-26 11:18:23 -05:00
James Cotton
042055b29a RFM22b: Call the pendingISR routine from all the user space tasks. Got a valid connection with this. 2012-08-26 04:18:17 -05:00
James Cotton
477385ca25 RFM22b: Start to move the ISR into userspace 2012-08-26 02:41:19 -05:00
James Cotton
a7b5fcd77c Monitor the radio threads 2012-08-25 18:48:30 -05:00
James Cotton
81ddbda972 Sensors: Scope some variables to suppress warnings 2012-08-25 17:30:04 -05:00
James Cotton
daad1d6f8f Sensors: Scope some variables to suppress warnings 2012-08-25 17:12:37 -05:00
James Cotton
982750a58f Merge remote-tracking branch 'revo/brian/revo_link' into revo-mini 
Conflicts:
	ground/openpilotgcs/src/plugins/plugins.pro
 2012-08-25 15:05:47 -05:00
James Cotton
5c34412200 Merge remote-tracking branch 'revo/amorale/revolution_baro_fixes' into revo-mini 2012-08-25 14:55:10 -05:00
Brian Webb
b3dc617702 Fixed PPM output from updated RadioComBridge module. 2012-08-25 12:52:06 -07:00
James Cotton
c5fda8208b TOFIX: For now hardcode a reversed orientation of MPU6000 for RevoMini 2012-08-25 14:41:03 -05:00
Brian Webb
e602b73a6f Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs. 
Conflicts:

	flight/Modules/RadioComBridge/RadioComBridge.c
	flight/PipXtreme/System/pios_board.c

Conflicts:

	flight/Modules/RadioComBridge/RadioComBridge.c
 2012-08-25 12:29:02 -07:00
James Cotton
0decce582b Got all the sensors reading 2012-08-25 14:19:15 -05:00
Stacey Sheldon
e7bf1db165 Revert "Removed Revolution specific code" 
This reverts commit d4a401ce30.
 2012-08-25 14:57:16 -04:00
Brian Webb
415b86879c Added the RFM22B driver to the Revo to support an RFM22B radio on the external SPI port. 2012-08-25 11:45:43 -07:00
Brian Webb
fad32dcc29 Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs. 2012-08-25 11:41:32 -07:00
a*morale
c696cccff8 Added an option to be able to change the interleave between Pressure and Temperature conversion for the MS5611 
To enable this option define the PIOS_MS5611_SLOW_TEMP_RATE with the number of Pressure conversion for each Temperature conversion.
 2012-08-25 13:04:41 +02:00
James Cotton
59d1367d37 Autotuning: Make the output also follow the hysteresis output 2012-08-24 22:45:45 -05:00
James Cotton
a3f1894cd7 Autotuning: Make the estimator require the value to toggle above and below the hysteresis level. 2012-08-24 21:33:08 -05:00
James Cotton
8babe5d8a4 Autotuning: Increase the measurement time to 30 seconds. 2012-08-24 21:32:11 -05:00
Laura Sebesta
f2ffd1fb99 Changed DIAGNOSTICS flag to be individual to each module instead of global. 
The upshot is the stack usage monitor can be turned on at a lower RAM threshold.
 2012-08-24 12:04:05 +02:00
Stacey Sheldon
1f1b240b2a Merge remote-tracking branch 'op-public/next' into revo-next 
Conflicts:
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-08-20 21:22:02 -04:00
James Cotton
c4b82fa1fd Disable transmitter updating PH location while using a tablet. 2012-08-12 17:51:52 -05:00
James Cotton
44dc01126e Merge branch 'next' into revo 2012-08-12 16:12:54 -05:00
James Cotton
3d1a6cbcba Attitude: Make sure the EKF can init if HomeLocation is not set but the 
magnetic field is.  Good for switching between indoor and outdoor mode.
 2012-08-12 16:11:04 -05:00
James Cotton
75db0fcb35 Merge branch 'next' into revo 
Conflicts:
	flight/Modules/GPS/GPS.c
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/systemalarms.xml
 2012-08-12 14:38:38 -05:00
Stacey Sheldon
29ab1d8cf3 actuator: factor out settings updates from main loop 2012-08-11 19:46:00 -04:00
Stacey Sheldon
b505602c15 Merge remote-tracking branch 'origin/stac/rc-tx-joystick-emulation' into next 2012-08-11 11:21:18 -04:00
Stacey Sheldon
49c153003c hid joystick: use linearly scaled channels 
Scales each channel only based on max and min calibrated values.
The neutral value is now ignored so the joystick sees a linear
range between min and max.

This is particularly useful to allow the full range of values for
throttle to be passed through to the joystick.
 2012-08-10 23:36:06 -04:00
James Cotton
06a6e367b0 Merge remote-tracking branch 'origin/hyper/OP-661' into next 2012-08-08 13:49:48 -05:00
Stacey Sheldon
ef0c12b1b6 hid joystick: emulate a USB HID joystick using RC Transmitter 
Adds a new RCTransmitter setting for the USB HID interface which
emulates a USB HID joystick.  The scaled RC receiver channels
from any RCVR protocol are passed through to the various emulated
joystick controls.

The main use for this feature is to allow you to use your own RC
transmitter with any RC simulator on a PC.

This is known to work with CRRCsim but should work with any simulator
that supports joystick input.
 2012-08-05 21:45:27 -04:00
James Cotton
9f3c8dddd3 Add a version of the sin lookup table that is in ram instead of flash 2012-08-03 12:15:57 -05:00
James Cotton
490955dbea Use cos_lookup instead of sin_looup(x+90) 2012-08-03 11:34:05 -05:00
James Cotton
fc2f8376bc Prevent an alarm from ManualControlCommand when using autotuning mode. 2012-08-03 09:37:47 -05:00
James Cotton
50c7641162 Move the PID methods into a standalone library 2012-08-03 09:37:46 -05:00
James Cotton
2723ff4be3 Factor the virtual flybar code out of the stabilization module 2012-08-03 09:37:46 -05:00
James Cotton
aae0e562c6 Create a sine lookup table that is cached in flash and make relay tuning start 
ot use this.
 2012-08-03 09:37:46 -05:00
James Cotton
924c91ce1e Fix mistake from previous merge with duplicate the STABILIZATIONOMDE_ATTITUDE 
case
 2012-08-03 09:37:46 -05:00
James Cotton
8565dfbcc3 Factor the relay tuning out of the main stabilization.c file into it's own 
tool.
 2012-08-03 09:37:46 -05:00
James Cotton
ee4bb84e36 Fix: Increase teh memory for autotune back to 1024 which leaves 100 free. 2012-08-03 09:37:46 -05:00
James Cotton
561cf994b0 Reduce the memory footprint of the sin lookup table by using sin(x+pi) = 
-sin(x).  Still just needs to move into flash and have some options about
precision when in its own library function.
 2012-08-03 09:37:46 -05:00
James Cotton
652647fc87 Make autotuning module optional 2012-08-03 09:37:46 -05:00
James Cotton
d0ef95ff9a Fix idiotic bug in the stab_refactor 2012-08-03 09:37:46 -05:00
James Cotton
2ccd6605a4 Now the stabilization refactor is in we can make swapping between tuning the 
system in rate or attitude mode software configurable.
 2012-08-03 09:37:45 -05:00
James Cotton
24d9e50c08 Based on the selected behavior either apply or save the stabilization settings 2012-08-03 09:37:45 -05:00
James Cotton
7ea14ecc22 Track the output gain instead of amplitude so the measured values are 
consistent if the settings are changed afterwards.
 2012-08-03 09:37:45 -05:00
James Cotton
17878b32f3 Make autotune run within an attitude loop instead of direct rate mode. Easier 
for beginners.
 2012-08-03 09:37:44 -05:00
James Cotton
a9af53b4f3 Create new autotuning module which rotates through the axes for autotuning and 
then computes new stabilization settings.
 2012-08-03 09:37:44 -05:00
James Cotton
44e72d0a70 A big refactoring of stabilization.c to get rid of the two separate loops and 
move them into one big structure.  This makes it easier to implement other
modes.
 2012-08-03 09:37:44 -05:00
James Cotton
e01c5d5f87 Get online estimation of period and amplitude working 2012-08-03 09:37:44 -05:00
James Cotton
4ac8df6aa8 Make the system perform an online estimate of the period and amplitude of the 
oscillation during relay tuning
 2012-08-03 09:37:44 -05:00
James Cotton
17a0d3ebb4 Add a relay stabilization mode 2012-08-03 09:37:44 -05:00
Richard Flay (Hyper)
6d34795494 Re-enabled simposix SDCard support, and removed obsolete SDCard alarm usage from System module 2012-08-01 19:53:59 +09:30
Werner Backes
e32152386a Increased stack for PIOS_SETS_HOMELOCATION case to avoid running into low stack warnings when settings the home location from GPS was actually used. 2012-07-31 11:10:23 +02:00
Sambas
2c8929525d Optional modules for Revolution, compiles but not flight tested. 2012-07-30 12:20:18 +03:00
Sambas
b8d33a8aab Just some tests/fixes 2012-07-30 11:47:34 +03:00
Sambas
a934063070 reworked AH gauge 2012-07-30 11:45:46 +03:00
Sambas
e59f99bc8e Wave audio player test app. 2012-07-30 11:45:36 +03:00
Sambas
79be7613b5 CC mag&baro for OSD, bmp needed some black magic hacking 2012-07-30 11:40:16 +03:00
James Cotton
dde9de080e Need to increase the GPS stack size when I include the GPZDA message 2012-07-29 12:41:20 -05:00
James Cotton
24636eb5f4 Add a waypoint above home for the box pattern. 2012-07-28 22:55:59 -05:00
James Cotton
9bd49ded4f OSX Simulator - get model type correctly 2012-07-28 13:35:31 -05:00
James Cotton
221ae05ef6 Perform the update every cycle. Mag rate of 0.001 seems to work well. 2012-07-27 13:20:30 -05:00
James Cotton
abb0caa6bd Try a different mag nulling algorithm. 2012-07-27 13:14:18 -05:00
James Cotton
9f00eda1b4 Add the mag offset compensation into into the simulated sensor code 2012-07-26 21:00:30 -05:00
James Cotton
880d58e4d9 Changes to mag nulling from D-Lite. Perform update only when we have a new 
vector sufficiently different from the previous one.
 2012-07-26 20:38:16 -05:00
James Cotton
6867068b9e Merge branch 'saving_queue' into next 2012-07-25 13:28:17 -05:00
James Cotton
c587ceebfd Make the mag offset nulling convergence rate come from the UAVO. When it is 
set to zero nulling does not occur to allow us to still calibrate the sensors.
 2012-07-25 11:23:27 -05:00
James Cotton
3b57b492d0 Mag bias tracking seems to work 2012-07-25 11:19:39 -05:00
James Cotton
1a5af9dafb Remove some old debugging code 2012-07-25 11:10:10 -05:00
James Cotton
d1e6dcc2f0 First pass implementation of William Premerlani's magnetometer bias correction 2012-07-25 11:07:40 -05:00
James Cotton
36fcdcc107 Make PH use axis lock by default 2012-07-24 14:10:05 -05:00
James Cotton
6561b9b164 For now make it an error when GPS is enabled but missing. However, no warnings 
when it's present.
 2012-07-24 11:28:31 -05:00
James Cotton
9865466da9 Make sure to create the system queue BEFORE calling task start. Systemmod 
initializes differently than other threads and I missed htat.  Huge thanks to
Hyper for making me realize that despite the fact I didn't see it :D.
 2012-07-24 09:51:03 -05:00
James Cotton
d75fef52ee Increase the overo event queue size to try and stop getting warnings. Only 
allocate when using overosync.
 2012-07-24 09:48:24 -05:00
Kenz Dale
8a5f4d40c5 Fix filtering rate for case where we have a baro sensor and a gps, but 
have no current gps data.

Also fixed minor timing bug that allowed the GPS to be used too often
when our primary instrument is the baro airspeed sensor.
 2012-07-24 15:16:52 +02:00
Kenz Dale
a77a012586 Eliminated attitude sensor timeout warnings when in simulation mode. 2012-07-24 15:15:37 +02:00
Kenz Dale
aa5e5a9b01 Removed "airspeed" field from Airspeed UAVO. Now everything is done either with true airspeed or calibrated airspeed 2012-07-24 15:15:21 +02:00
James Cotton
ea5c3be026 Need to add hooks in sendObject and receiveObject to actually transmit _TS objects 2012-07-24 02:57:51 -05:00
James Cotton
858c2cd512 Increase the size of the overo queue 2012-07-24 01:54:04 -05:00
James Cotton
8f8ae5bacb For revolution we MUST initialize teh GPS objects all the time or attitude will 
fail
 2012-07-23 10:01:32 -05:00
James Cotton
e38325c745 Should check that the queue allocates and initialize shoudl return -1 if not 2012-07-23 08:47:43 -05:00
Kenz Dale
21527544f9 Fixed compile-time bugs in the case where airspeed module is compiled, but no drivers are present in pios_config. 2012-07-23 14:06:44 +02:00
James Cotton
545018244c Make saving occur within the system thread instead of the event system thread 2012-07-22 23:03:27 -05:00
Stacey Sheldon
f5db83bd20 Merge remote-tracking branch 'op-public/next' into revo-next 
Conflicts:
	flight/Libraries/inc/NMEA.h
	flight/Modules/GPS/GPS.c
	flight/Modules/GPS/NMEA.c
	flight/Modules/GPS/UBX.c
	flight/Modules/GPS/inc/NMEA.h
	flight/Modules/GPS/inc/UBX.h
	flight/Modules/PathPlanner/inc/pathplanner.h
	flight/PiOS/STM32F10x/link_STM32103CB_PIPXTREME_sections.ld
	flight/Revolution/System/inc/pios_config.h
	flight/Revolution/UAVObjects.inc
	flight/SimPosix/UAVObjects.inc
	ground/openpilotgcs/src/plugins/hitlv2/aerosimrc/src/qdebughandler.h
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	shared/uavobjectdefinition/gpsvelocity.xml
 2012-07-22 23:39:37 -04:00
Oleg Semyonov
f3f34e8f9f AeroSimRC: fix CC3D virtual sensor readings in simulation mode 2012-07-22 14:18:49 +03:00
James Cotton
d8e0cbc78f Make inadequate lock a warning instead of error/critical from GPS. This allows 
flying indoors.
 2012-07-22 02:17:58 -05:00
James Cotton
42501d6312 Merge branch 'nosave_while_armed' into revo 2012-07-22 02:13:25 -05:00
James Cotton
bcebced609 Merge branch 'revo_gps_merge' into revo 2012-07-22 01:21:50 -05:00
James Cotton
a559286d0b A few of the UBX types were missing a struct for the type. 2012-07-22 01:21:12 -05:00
James Cotton
fa4adf1630 A few of the UBX types were missing a struct for the type. 2012-07-22 01:17:06 -05:00
James Cotton
9c512261e6 When in indoor mode reset the baro offset to zero 2012-07-22 01:02:14 -05:00
James Cotton
93faf131b0 Merge branch 'next' into revo 
Conflicts:
	flight/Modules/GPS/GPS.c
	flight/Modules/GPS/NMEA.c
	flight/Modules/GPS/UBX.c
	flight/Modules/GPS/inc/NMEA.h
	flight/Modules/GPS/inc/UBX.h
	flight/Revolution/System/inc/pios_config.h
	flight/Revolution/UAVObjects.inc
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	ground/openpilotgcs/src/plugins/waypointeditor/waypointeditorplugin.h
	shared/uavobjectdefinition/gpsvelocity.xml
 2012-07-22 00:43:19 -05:00
James Cotton
5649813c2b Make sure to always compare BiasCorrectedRaw against its enum. Also reversed 
the order of TRUE,FALSE in the definition to make it safer anyway.
 2012-07-21 17:24:58 -05:00
James Cotton
d36663dbbd Treat the GyroBias UAVO like a state estimate of the actual gyro bias so now we 
subtract that from the raw sensor readings to get the Gyros UAVO value
 2012-07-21 15:14:45 -05:00
James Cotton
3e33bb49a2 EKF gyro bias into the object now working propely 2012-07-21 15:11:04 -05:00
James Cotton
02dfa7bd82 Change how the updated settings in attitude are changed to make it easier to 
initialize them all
 2012-07-21 14:31:14 -05:00
James Cotton
3f4706ad4c Make it a critical error when an invalid attitude algorithm is selected 2012-07-21 14:00:52 -05:00
James Cotton
69057a1373 No reason to get homeLocation every cycle 2012-07-21 13:57:25 -05:00
James Cotton
7cdf47c1d4 Make the sensors code only apply the GyroBias from the UAVO which is now coming 
consistently only from the attitude module
 2012-07-21 13:51:20 -05:00
James Cotton
e5bd999975 Process the settings updates more discretely in revo attitude 2012-07-21 13:50:16 -05:00
Stacey Sheldon
123f199160 gps: fix case on GPS.h file 2012-07-21 14:42:04 -04:00
Stacey Sheldon
fc78d9f7d8 nmea: fix typo in DEBUG macro name 2012-07-21 14:23:14 -04:00
Stacey Sheldon
eafd525323 Merge remote-tracking branch 'origin/D-Lite/ubx-parser-next' into next 2012-07-21 14:22:10 -04:00
James Cotton
797a4def6a Do not use the data from the magnetometer if it contains NAN 2012-07-21 11:43:31 -05:00
Werner Backes
d4a401ce30 Removed Revolution specific code 2012-07-21 07:58:00 +02:00
James Cotton
bcdd5a8bba Fixes to the overo module where it was thinking the fifo buffer writes failed 2012-07-20 13:45:31 -05:00
James Cotton
5091b16065 Needs work but it's sending data now 2012-07-20 11:36:49 -05:00
James Cotton
6a3c067c18 Zero out the packet counter when pios_over is initialized. 2012-07-20 10:45:20 -05:00
James Cotton
6b3e5573a0 The overosync module now uses pios_com interface. 2012-07-20 09:46:28 -05:00