James Cotton
5d0e513678
Fix small deg/rad issue in generating gps data
2012-04-03 09:17:55 -05:00
James Cotton
df6bc4deff
Enable guidance on simulation and add wind model
2012-04-03 09:16:31 -05:00
James Cotton
fdfaac6559
More tweaks to OSX simulator
2012-04-03 09:16:31 -05:00
James Cotton
ca535c2632
Fix bugs in simulated sensor data. Now works well with INSGPS.
2012-04-03 09:16:31 -05:00
James Cotton
84040d25b4
Add attitudesimulated object to capture the simulated state
2012-04-03 09:16:30 -05:00
James Cotton
09ce6e1ab4
Restore the original Revolution FreeRTOSConfig and make the osx simulation
...
scheduler not start high priority tasks when they are created because I can't
reliably get the starting task to stop (because currently in a swapping mutex I
think).
2012-04-03 09:16:30 -05:00
James Cotton
6df9691609
Bring back the original module files and remove comments from FreeRTOS
...
debugging
2012-04-03 09:16:30 -05:00
James Cotton
82a2987b2c
More improvements to the osx simulation FreeRTOS port. Only tick the tick
...
handler when we have confirmed the running thread has halted. This is more
like what would happen on a single core machine.
2012-04-03 09:16:30 -05:00
James Cotton
543500ed78
Improve the simulated sensors to produce (I think) consistent data now
2012-04-03 09:16:30 -05:00
James Cotton
0b342ea3d6
Changing the tick counter to only happen after current thread is suspended
...
seems to fix stability issues
2012-04-03 09:16:30 -05:00
James Cotton
fbd8695d7d
Check in WIP for osx simulation
2012-04-03 09:16:30 -05:00
James Cotton
c1726e30e5
Make pios_tcp uses two threads - one for the socket stuff and another within
...
FreeRTOS to receive the data.
2012-04-03 09:16:30 -05:00
James Cotton
75262b400a
More osx simulation work
2012-04-03 09:16:29 -05:00
James Cotton
da294384b6
Getting closer on osx simulation
2012-04-03 09:16:29 -05:00
James Cotton
a2bc7b8668
Osx Simulator Not running quickly but at least it's staying up
2012-04-03 09:16:29 -05:00
James Cotton
898a595d81
Delete old files
2012-04-03 09:16:29 -05:00
James Cotton
adad006530
More work on OSX simulation
2012-04-03 09:16:29 -05:00
James Cotton
99e246f151
More of the 7.0 files for OSX simulation
2012-04-03 09:16:29 -05:00
James Cotton
356802b5ac
Update to FreeRTOS 7 for OSX sim
2012-04-03 09:16:28 -05:00
James Cotton
0d3a6d94d8
Delete some old files
2012-04-03 09:16:28 -05:00
James Cotton
491df5d130
Small update to the osx wdg
2012-04-03 09:16:28 -05:00
James Cotton
51f0c3453b
More work on osx simulation engine
2012-04-03 09:16:28 -05:00
James Cotton
3c0b65fbf8
Implement a simulated watchdog to catch when the chip would have reboot
2012-04-03 09:16:28 -05:00
James Cotton
28cab678ce
Simulate a more complete QC model.
2012-04-03 09:16:28 -05:00
James Cotton
9d5dbe4bfe
Create stub for TCP connection of simulation
2012-04-03 09:16:28 -05:00
James Cotton
6aa1f1e344
Had some debugging outputs (logged to file) still enabled
2012-04-03 09:16:28 -05:00
James Cotton
f1aa3b658e
Add a new sensor simulation mode that essentially has a gyro rate that is rate
...
desired and the accel based on the current attitude.
2012-04-03 09:16:28 -05:00
James Cotton
ce54c4205d
Disable a print from the port that was causing rashes
2012-04-03 09:16:27 -05:00
James Cotton
6df2df6eec
Get rid of the mutex when enabling/disabling soft IRQs. This isn't ideal but
...
it seems to be triggering deadlocks.
2012-04-03 09:16:27 -05:00
James Cotton
6adc74f6f9
Check in the fake sensor data module
2012-04-03 09:16:27 -05:00
James Cotton
dee17f8fd4
Enable task run time monitoring in osx simulation
2012-04-03 09:16:27 -05:00
James Cotton
0e815540ff
Patch from Stac that processes module names without using sed. Also enable
...
diagnostic stuff for simulation.
2012-04-03 09:16:27 -05:00
James Cotton
2391385788
Remove the pauase in the idle task. Increases load but also stability.
2012-04-03 09:16:27 -05:00
James Cotton
e97c1bc016
Include the module include file before any uavo ones
2012-04-03 09:16:27 -05:00
James Cotton
dfa39b59bf
Rename the pios_config file for simulation
2012-04-03 09:16:26 -05:00
James Cotton
cb7b475d03
Remove the need ot have two ways of listing the modules for simulation
2012-04-03 09:16:26 -05:00
James Cotton
76bdd09795
Rename the pios_config file for simulation
2012-04-03 09:16:26 -05:00
James Cotton
e79a6e292b
Add watchdog flag for simulated sensor task
2012-04-03 09:16:26 -05:00
James Cotton
e0fbdaf9fe
Move the pios_board_posix file to something more general
2012-04-03 09:16:26 -05:00
James Cotton
c8a64ccbc7
Need to use slightly different code to generate the InitMods.c function for
...
simulation because of the Attitude/Revolution format.
2012-04-03 09:16:26 -05:00
James Cotton
1763d0c72c
Switch to conditional signaling. Seems more robust.
2012-04-03 09:16:26 -05:00
James Cotton
f0e84088c1
Simulated LED now flashing.
2012-04-03 09:16:26 -05:00
James Cotton
5589ca60db
Check in compilation files for OSX simulation. Update to work on revolution
...
tree.
2012-04-03 09:16:26 -05:00
James Cotton
ea5b733ac8
Fix the soft timing in pios_delay. Also disable LED printing messages.
2012-04-03 09:16:26 -05:00
James Cotton
dd5a71c48d
Add watchdog flag for simulated sensor task
2012-04-03 09:16:25 -05:00
James Cotton
ae2f1e95f6
Move the pios_board_posix file to something more general
2012-04-03 09:16:25 -05:00
James Cotton
5fd569829c
Need to use slightly different code to generate the InitMods.c function for
...
simulation because of the Attitude/Revolution format.
2012-04-03 09:16:25 -05:00
James Cotton
5901a07eb1
Switch to conditional signaling. Seems more robust.
2012-04-03 09:16:25 -05:00
James Cotton
99b81c7159
Simulated LED now flashing.
2012-04-03 09:16:25 -05:00
James Cotton
4e64b27034
Disable matlab simulation for now
2012-04-03 09:16:24 -05:00
James Cotton
cfd92de87a
Add explicit casts in manualcontrol to avoid compiler warnings/errors
2012-04-03 09:16:24 -05:00
James Cotton
7ba32f8735
Check in compilation files for OSX simulation. Update to work on revolution
...
tree.
2012-04-03 09:16:24 -05:00
James Cotton
5827e3f565
Add box around logo path
2012-04-03 03:42:37 -05:00
James Cotton
bfb0c6935e
Make pathplanner use callbacks on the waypoints and their index to pick up
...
changes from the GCS while flying
2012-04-03 03:42:37 -05:00
James Cotton
c26cceb47b
If the waypoint index is changed then update teh position desired. This should
...
probably be done with change callbacks because currently changing the waypoints
themselves doesn't update position desired.
2012-04-03 03:42:36 -05:00
James Cotton
6d1c36680f
Scale the max velocity as a magnitude on teh vector instead of independently on
...
each direction
2012-04-03 03:42:36 -05:00
James Cotton
5b3cc4876e
In simulations a higher GPS noise is required for the INS
2012-04-03 03:42:35 -05:00
James Cotton
32f76db8ae
Only update position desired when you change waypoints active
2012-04-03 03:42:35 -05:00
James Cotton
ba1ade33cb
Get navigation working and program hardcoded flight path
2012-04-03 03:42:34 -05:00
James Cotton
62117430cf
Flip the sign of throttle in the guidance altitude control
2012-04-03 03:42:34 -05:00
James Cotton
7f226867c6
Some bug fixes for revo attitude estimation.
2012-04-03 03:42:33 -05:00
James Cotton
d4488512c0
Add RTH waypoint action
2012-04-03 03:42:33 -05:00
James Cotton
3eac69e953
Create stub for waypoint navigation
2012-04-03 03:42:32 -05:00
James Cotton
c8ceea72e6
Increase the telemetry queue size from revolution
2012-04-03 03:42:32 -05:00
James Cotton
af9f36d7df
Improve the attitude initialization for all of the modes
2012-04-03 03:42:32 -05:00
James Cotton
3888d6ff69
Changed settings that makes updates smoother
2012-04-03 03:42:31 -05:00
James Cotton
319b53a342
Make sure full initialization routine for INSGPS occurs each time it is
...
restarted.
2012-04-03 03:42:31 -05:00
James Cotton
372f959c37
Refine some stack sizes
2012-04-03 03:42:30 -05:00
James Cotton
54880c83a0
Fix some task sizes and the memory limits
2012-04-03 03:42:30 -05:00
James Cotton
a83fb019f6
When in complimentary filter mode pass the GPS information straight
...
through to Position Actual
2012-04-03 03:42:29 -05:00
James Cotton
98b1a21921
Fixup: Shouldn't update gps until home location is set
2012-04-03 03:42:29 -05:00
James Cotton
7a3ec3e173
Some code cleanup to get rid of some warning messages
2012-04-03 03:42:29 -05:00
James Cotton
23625904c5
Remove the now unused ECEF and Rne fields from HomeLocation. Also reenable
...
calculation of the WMM and HomeLocation from the GPS code for revolution.
2012-04-03 03:42:28 -05:00
James Cotton
71d0180d45
Use the sensor variances from object
2012-04-03 03:42:28 -05:00
James Cotton
ce2d1f94f6
Better hardcoded constants for INS variances
2012-04-03 03:42:27 -05:00
James Cotton
de7fc81795
Fixes to the GPS LLA to NED translation
2012-04-03 03:42:27 -05:00
James Cotton
e32ab9342c
Shuffle some stack sizes around
2012-04-03 03:42:26 -05:00
James Cotton
4cadb7ec0e
Forgot to initialize revo settings object
2012-04-03 03:42:26 -05:00
James Cotton
337d5b7079
Enable guidance in revo. Update manual control to set the position desired
...
when the switch is flipped.
2012-04-03 03:42:25 -05:00
James Cotton
0eedaa1250
Change how we convert LLA to NED. Now it is done with a taylor expansion
...
around the home LLA coordinate to avoid the conversion into ECEF coordinates.
This has the benefit of not requiring double precision math and uses less
operations.
Now we should remove the Rne and ECEF fields from HomeLocation as they are
unused
2012-04-03 03:42:25 -05:00
James Cotton
e8cc7748af
Clean up some unused variables in attitude code
2012-04-03 03:42:24 -05:00
James Cotton
a9aa6b696b
Add object for setting the fusion algorithm
2012-04-03 03:42:24 -05:00
James Cotton
1911c7360d
New NEDPosition object which is the transformed GPS location
2012-04-03 03:42:24 -05:00
James Cotton
e3c36ac99a
Change requires for GSP updated to be set to true (wrong sign on PDOP check)
2012-04-03 03:42:23 -05:00
James Cotton
1630267324
Some small updates to 16 state INS
2012-04-03 03:42:23 -05:00
James Cotton
9e4651ab80
INS working on Revo
2012-04-03 03:42:22 -05:00
James Cotton
7e36d086de
More work on INS algorithm to force constants to single
2012-04-03 03:42:22 -05:00
James Cotton
137429d92d
More work for the simulation
2012-04-03 03:42:22 -05:00
James Cotton
96edea9d4b
Some fixes to GPS parsing
2012-04-03 03:42:21 -05:00
James Cotton
55ee568fe2
Work on the INS algorithm
2012-04-03 03:42:21 -05:00
James Cotton
7034a45e44
Force more calculations to explicitly being float
2012-04-03 03:42:20 -05:00
James Cotton
8c8224c122
Use a bigger event queue for overo logging to avoid event system warnings, and
...
add code to shortcircuit formatting a packet if it will not fit.
2012-04-03 03:42:19 -05:00
James Cotton
e82323af32
Make revolution work with the FreeRTOS queue based MPU6000 driver
2012-04-03 03:41:52 -05:00
James Cotton
bb41bc1472
Add no for DIAG_TASKS to make file to make it easier not to miss.
2012-04-03 02:07:04 -05:00
James Cotton
d7cb232315
Add MPU6000 accel range to config structure. Also put in correct values.
2012-04-03 02:07:04 -05:00
James Cotton
3346e848e0
Attitude error timeout was 2 ms when sensors at 500 Hz. Caused lots of errors
...
and overwhelmed event system.
2012-04-03 02:07:04 -05:00
James Cotton
3f22ef8c66
Slow MPU6000 on CC3D to 500 Hz
2012-04-03 02:07:04 -05:00
James Cotton
35854b35f6
MPU6000 accel value coming out twice as high as it should. Need to store scale
...
in cfg structure to fix this properly.
2012-04-03 02:07:04 -05:00
James Cotton
8032130769
Slow down gyro a bit on CC to give the CPU some breathing room. Might need to
...
come down more.
2012-04-03 02:07:03 -05:00
James Cotton
a960f3d07e
Switch the MPU6000 driver to using a FreeRTOS queue. Need to update Revo code
...
to take advantage of this.
2012-04-03 02:07:03 -05:00
James Cotton
1415728762
Get the MPU6000 CC3D working. Right now the ADC system is commented out, which
...
will break regular CC.
2012-04-03 02:07:03 -05:00
James Cotton
a0b7453580
Make the firmwareIAP variable not a global
2012-04-03 02:07:03 -05:00
Stacey Sheldon
9b33be5d65
ef: pad any gaps between the BL bank and the FW bank
...
The Entire Flash (EF) image for revo has a gap between
the end of the BL bank and the start of the FW bank.
This fills the gap with 0xFF and properly aligns the
FW image in flash.
2012-04-01 22:39:27 -04:00
Brian Webb
df0a1c2ac1
Upgraded Brian-Metadata-Mods to current next.
2012-04-01 12:25:13 -07:00
Brian Webb
496a323b7f
Fixed indentaion.
2012-03-31 07:59:44 -07:00
Stacey Sheldon
eab923fee0
revo: move fw image into 128KB sectors
...
This saves the more versatile 16KB and 64KB sectors
for other purposes.
2012-03-28 21:52:43 -04:00
Stacey Sheldon
f971fc14d5
openocd: update to latest git snapshot (f1c01333)
2012-03-27 00:53:27 -04:00
Stacey Sheldon
91cffb1809
f4 usb: don't skip yield from ISR
...
Function was returning prior to the code that might
need to yield from within the ISR.
2012-03-27 00:18:44 -04:00
Corvus Corax
0742c88a98
enabled optional rtation of Revolution board
2012-03-26 05:25:52 +02:00
Corvus Corax
d32dd0ccd4
Fixed fmod() versus fmodf() usage in flight/...
2012-03-26 04:16:54 +02:00
Brian Webb
1669f00456
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-03-24 15:21:16 -07:00
Brian Webb
23f6c8af73
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-03-23 20:49:12 -07:00
Stacey Sheldon
730defb698
f4 flash: fix flash voltage range setting in bl_helper
...
F4 boards are powered by 3.3V which corresponds to
VoltageRange_3. Fix this to match actual VDD so we
get faster erase/write times.
2012-03-22 22:37:31 -04:00
James Cotton
8059004755
Make sure if an event has a null handle and the queue is full we don't try and
...
query UAVObjID
2012-03-22 10:46:30 -05:00
James Cotton
c7ff2a46c7
Merge remote-tracking branch 'origin/laurent/modelview' into revolution
...
Conflicts:
flight/CopterControl/Makefile
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
2012-03-22 02:58:24 -05:00
James Cotton
2f8049e20a
Update the bootloader hw version for the mpu6000 board and make the sensor code
...
and initialization respond appropriately. Enable hte L3GD20 and BMA180.
Let the board type determine which is used.
2012-03-22 00:41:37 -05:00
James Cotton
6350ec575e
Merge remote-tracking branch 'origin/os/features/stick-deadband-next' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
2012-03-21 16:03:40 -05:00
James Cotton
e7ca02c038
Initialize mag before mpu6000. Seems more reliable but I don't know why.
2012-03-21 03:42:15 -05:00
James Cotton
e4290d678b
Reenable the pressure sensor and other modules
2012-03-21 00:49:29 -05:00
James Cotton
720684c248
Flag to enable pressure/mag
2012-03-21 00:49:04 -05:00
James Cotton
a77a859e5c
Using some config switches to get this board up and running
2012-03-21 00:48:31 -05:00
James Cotton
6b88a278b3
Disable overosync by default. It was triggering event system warnings due to
...
the extra updates from altholdsmoothed. Increase queue size when reenabled.
Also AltHold is is trigger warnings because other tasks starve it during
startup.
2012-03-21 00:29:09 -05:00
James Cotton
f4663b98e4
When the event system or object manager has an error store the object ID in the
...
SystemStats.
2012-03-20 23:18:07 -05:00
Brian Webb
fc2d81cd8c
Added optional ADC initialization to PipXtreme (turned off).
2012-03-19 17:59:05 -07:00
Brian Webb
fdf853a2fe
Cleaned up the PipXtreme makefile.
2012-03-18 19:26:18 -07:00
Brian Webb
823b111d60
Added Reed-Solomon error correction to PipXtreme. The code is a slight modification of rsscode ( http://rscode.sourceforge.net ). Packet acking has also been turned on as the default, so each packet is error corrected, and if errors remain, the packet is NACKed, otherwise it is ACKed. Also temporarily turned off UAVTalk parsing. This was causing the CC to be identified as a PipX due to the PipX sending UAVObjects (I believe) from the system module. The system module is going to have to be modified/replaced for the PipX.
2012-03-18 17:43:29 -07:00
Brian Webb
aba3789d87
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into Brian-Metadata-Mods
2012-03-18 13:28:11 -07:00
Brian Webb
346ae1bc6e
Removed crc from PipXtreme build.
2012-03-18 10:29:28 -07:00
Brian Webb
620e862022
Moved unused crc.c/h back to PipXtreme directory.
2012-03-18 10:26:47 -07:00
Brian Webb
ecdf150946
Moved RFM22B code from PipXtreme to pios_rfm22b.c driver. The radio is now passing data.
2012-03-18 10:22:05 -07:00
Brian Webb
41c68a6f6b
Updates to PipX configration.
2012-03-15 19:51:46 -07:00
Brian Webb
78b622a8d8
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into PipXtreme
2012-03-15 19:31:18 -07:00
Brian Webb
b34b849453
Added start at a modified PipX packet handler.
2012-03-15 19:29:54 -07:00
James Cotton
a319a6b14c
Flags to disable mag/baro init
2012-03-14 22:35:09 -05:00
James Cotton
0d42303d37
Fix some compilation errors/warnings in attitude.c
2012-03-11 16:30:18 -05:00
James Cotton
c8d1534b87
Convert inline functions to static, let the compiler figure it out. Also some
...
formatting since code was probably written with tabstop = 2 :)
2012-03-11 13:18:08 -05:00
James Cotton
bbbca319d8
Merge commit 'c4df0c0ceff8ba985bb20d815f27910b9e59d992' into revolution
2012-03-11 13:14:06 -05:00
Alessio Morale
c4df0c0cef
Support for port remapping on serial ports
...
Support for receiver configuration (PPM, PWM and DSM)
There are still problems with Flexi port (not sure if related to a problem with my board) and Uart/SBUS that has the input always inverted.
2012-03-11 18:38:49 +01:00
Stacey Sheldon
3782cdc58e
bu: drop CC and PipX from BU targets since they don't build
...
The CC and PipX bootloader updater (BU) builds don't currently
work due to some recent changes in how LEDs are handled.
Remove them from the default BU targets so that the all_flight
target can build clean again.
Also fix a linker warning in OP build.
2012-03-10 20:41:15 -05:00
Stacey Sheldon
6038bfcb40
revo servo: swap servo pins 3 and 4 definitions to match schematic
...
Note non-standard pin numbering on JP3 on the schematic.
2012-03-10 15:06:21 -05:00
James Cotton
820ca6a970
Initialize loop variable OUTSIDE loop so that baro is used still for altitude
...
hold.
2012-03-10 11:28:51 -06:00
James Cotton
f4705551b6
Update task info to cover the AltitudeHold module
2012-03-10 11:14:30 -06:00
Dmitry Zaitsev
d45e88515b
firmware: disable Attitude module in simulation
...
this part should be rewritten to completely disable the polling of sensors.
i just do not know how to do it correctly.
2012-03-10 06:02:23 +04:00
James Cotton
690f1b5f29
Enable camera stabilization
2012-03-08 01:37:34 -06:00
Stacey Sheldon
3210bd3f9c
f4 usb_dcd: disable FIFO empty IRQ while waiting for tx completion
...
CPU was being hammered with FIFO empty IRQs if we queued data but
the host wasn't actively draining the FIFO.
This was entirely unexpected so this hack should probably be
removed once we can figure out why this was happening.
This is almost certainly hiding some other issue.
2012-03-07 20:36:37 -05:00
Stacey Sheldon
c4bd286739
f4 usb_hid: track whether we have buffers queued on endpoints
...
Make sure we don't clobber our endpoint configuration by
double configuring an Rx or Tx buffer against it. Wait for
the completion of the previous operation before allowing
endpoint configuration again.
2012-03-07 20:36:36 -05:00
Brian Webb
d73895de7d
Working PipX com relay.
2012-03-07 18:05:42 -07:00
Stacey Sheldon
65fc6104e6
f4 usb_hid: ignore upper layers if USB IF not yet enabled
...
Upper (COM) layer was calling down into the HID layer before
the HID interface had been enabled. This was leading to
interacting with the endpoint Rx and Tx FIFOs prior to init.
The FIFO config was then being clobbered when we the USB IF
was eventually enabled.
2012-03-07 20:01:35 -05:00
Stacey Sheldon
1f37806eab
f4 usb_hid: fix typo in EP IN registration call
...
Code was using the size of the Rx buffer instead of the Tx
buffer when registering. Buffers are currently the same
size so wasn't causing any issues.
2012-03-07 20:01:35 -05:00
Stacey Sheldon
bc3ee6209c
f4 usbhook: drop in/out bit from EP numbers before using as index
...
USBHOOK endpoint callback arrays should not be indexed with the
0x80 (in/out) bit set. Oops.
2012-03-07 20:01:35 -05:00
Stacey Sheldon
6832a62872
f4 bl_helper: clear all flash errors as we unlock the flash
...
Error flags being set were causing flash erase operations to
fail. Not sure why these flags were set though so this might
be hiding some other problem.
2012-03-07 19:53:18 -05:00
Stacey Sheldon
4ea1156e7b
f4 bl_helper: teach bl_helper about f4 flash sector map
2012-03-07 19:53:17 -05:00
Stacey Sheldon
d1d123e4f6
revo bl: turn on USB and add support for OP DFU protocol
2012-03-07 19:53:17 -05:00
Stacey Sheldon
b8fcbad297
revo bl: remove unneeded code from revo BL
...
Clean up BL source tree and makefile.
2012-03-07 19:53:17 -05:00
Stacey Sheldon
c854c3f4a4
usbhook: add support in API for deactivating USB
2012-03-07 19:53:17 -05:00
Stacey Sheldon
cb9c3a9b7e
usbhook: delete dead code
...
Remove old code left-over from porting from F1 to F4.
2012-03-07 19:53:17 -05:00
Stacey Sheldon
e2ab662b5d
sysclk: pass in correct definition for HSE_VALUE
...
The code in RCC_GetClocksFreq() uses HSE_VALUE to determine
the tick rate of the SYSCLK. This in turn is used by the
code in PIOS_DELAY_* to compute delays.
ST Library defaults this to 25MHz for the F4. Our board
actually has an 8MHz oscillator so delays were way off.
Mostly affects the bootloaders since most FW code uses RTOS
delays rather than busy-waiting using PIOS_DELAY_*.
2012-03-07 19:52:54 -05:00
Stacey Sheldon
fdf54ab86c
hid: fix response to HID descriptor
...
HID driver was incorrectly giving back the HID interface
descriptor when asked for the HID descriptor. This should
let OP boards interact better with generic HID layer drivers
and also gives us nicer output in lsusb once the HID descriptor
is read.
2012-03-07 19:52:54 -05:00
Brian Webb
444150269a
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into PipXtreme
2012-03-05 18:22:08 -07:00
James Cotton
61d59828dc
Disable the new features if not revolution and set an error flag. Fixes
...
compilation errors.
2012-03-05 00:24:11 -06:00
Alessio Morale
637af911ef
Merge remote-tracking branch 'origin/james/revolution' into amorale/revolution
2012-03-04 12:31:13 +01:00
James Cotton
7961aba83c
Clean up a few more compiler warnings
...
Conflicts:
flight/PiOS/Common/pios_ms5611.c
2012-03-03 13:32:56 -06:00
James Cotton
91a226fc12
Sometimes the mag stops updating so kickstart it
2012-03-03 13:31:46 -06:00
James Cotton
bc8b72623e
Get rid of some unused variables
2012-03-03 11:54:09 -06:00
James Cotton
b3f620af7c
Merge remote-tracking branch 'revo/stac/openocd' into revolution
2012-03-03 11:52:09 -06:00
James Cotton
f20e5da9ed
Merge branch 'next' into revolution
...
Conflicts:
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configrevowidget.h
ground/openpilotgcs/src/plugins/scope/scopegadgetwidget.cpp
2012-03-03 11:41:41 -06:00
Stacey Sheldon
0684a42fac
build: use board-specific JTAG interface for openocd
...
Removes hard-coding of JTAG interface config in the
<board>_program make macros.
This allows the use of STLINKv2 for F4 boards while
continuing to use the FOSS JTAG revB on F1 boards.
2012-03-03 08:43:01 -05:00
Stacey Sheldon
d78c5d2a9a
openocd: reenable flash commands on f4 boards
2012-03-03 08:43:01 -05:00
Stacey Sheldon
c0c38609ec
openocd: move to newer openocd (dec6b913)
...
This update fixes flash writing on F4 chips
2012-03-03 08:43:01 -05:00
Alessio Morale
226cd09a13
Merge branch 'james/revolution' into amorale/revolution
2012-03-02 21:24:56 +01:00
James Cotton
e3df261213
Merge branch 'stac/revo-usb' into revolution
...
Conflicts:
flight/Revolution/System/pios_board.c
2012-03-02 13:00:13 -06:00
James Cotton
72a93dbae5
Fix from PT for OSX/Windows F4 USB HID to send the full report size even if not
...
all used.
2012-03-02 11:11:36 -06:00
Alessio Morale
e8880d7271
Removed duplicate InitClock for tim_4
2012-03-02 00:55:50 +01:00
Alessio Morale
691e8760bc
Updated OpenPilotOSX.xcodeproj to include Flight as a reference to the actual folder
2012-02-29 23:13:02 +01:00
Brian Webb
a0bdc58e5b
Added framework for rfm22b com device.
2012-02-28 21:30:06 -07:00
Brian Webb
992aa3bec6
Updated PipX branch to use CDC device with a VCP (not working yet).
2012-02-25 09:07:37 -07:00
Brian Webb
e2cb750dc6
First cut on RadioComBridge module, which is intended to pass data from either a USART or a USB port to the PipX radio link.
2012-02-25 07:37:05 -07:00
Brian Webb
01f314724b
Updates to USB configuration on the PipXtreme.
2012-02-24 15:54:26 -07:00
Brian Webb
483a96c31d
Some more cleanup to PipXtreme codebase.
2012-02-24 07:49:41 -07:00
Brian Webb
b69b285f58
Fixed PipXtreme bootloader.
2012-02-23 20:40:24 -07:00
Brian Webb
182f285e60
Added missing startup file for PipXtreme.
2012-02-23 20:06:34 -07:00
Brian Webb
cf34baec69
Some cleanup on PipXtreme codebase.
2012-02-23 19:58:23 -07:00
Oleg Semyonov
2271b95816
Merge remote branch 'origin/next' into os/features/stick-deadband-next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
ground/openpilotgcs/src/plugins/config/configtaskwidget.cpp
ground/openpilotgcs/src/plugins/config/configtaskwidget.h
2012-02-23 08:32:27 +02:00
Oleg Semyonov
e62cc8914c
Merge remote branch 'origin/next' into os/features/pid-tuning-from-transmitter-next
...
Conflicts:
flight/CopterControl/Makefile
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configtaskwidget.cpp
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/hwsettings.xml
2012-02-22 23:03:17 +02:00
Brian Webb
f0dfba6fc0
Re-baslined the PipX codebase using the experimental Transmitter codebase.
2012-02-21 20:29:06 -07:00
Oleg Semyonov
403e9cd220
TxPID module: add ILimit values to the list of settings
2012-02-21 19:57:10 +02:00
James Cotton
7b548eaa54
Fix bug in the integral for altitude hold where it was accumulating wrong variable.
2012-02-21 00:40:55 -06:00
Brian Webb
43f6458f86
Reduced the sizeof the UAVObject metadata by:
...
1) Combining all binary or mode values into a single byte
2) Adding accessor functions to read/write the flag bits
3) Reduced the size of the time values from 32 bits to 16 bits
2012-02-20 18:45:18 -07:00
James Cotton
900780e10c
Add bias estimation to the altitude fusion algorithm. Necessary to increase
...
the gains on acceleration and velocity feedback terms (they are a problem when
biased).
2012-02-19 11:38:09 -06:00
James Cotton
47fac7e31c
Move the throttle setting code for alt hold into the fast accel loop.
2012-02-18 18:16:15 -06:00
Oleg Semyonov
c721d001c0
Subtract deadband offset from then input to still have fine control
2012-02-18 10:21:51 +02:00
James Cotton
7d4582e5f0
Update the altitude KF to use the updated measurements appropriately and check
...
in the relevant matlab code to check it and genererate it. Produces quite
smooth traces.
2012-02-16 05:33:47 -06:00
James Cotton
c957172f8f
In the case of swapping in userspace due to the buffer being blocked during
...
ISR, make sure the latency is less than 50 us to avoid framesync errors. Still
seeing a few nonsense packets on Overo side but fairly few. Probably need to
add CRC to whole packet now and call it done.
2012-02-14 11:06:16 -06:00
James Cotton
1930d092eb
In the case where the overo scheduler cannot swap buffers (userspace loading
...
it) then set a flag so as soon as the buffer is loaded then we schedule it.
2012-02-14 11:00:29 -06:00
James Cotton
f04c58b0f4
Make the overo transaction occur based on the rising edge of the NSS line.
...
This fixes most of the frame sync problems. However, it's a bit hacky as
there is currently hardware information inside a module.
2012-02-14 10:37:30 -06:00
James Cotton
d018d93e88
Clean up previous commit a bit and make the sampling rate a variable (and adapt
...
the sampling time accordingly).
2012-02-13 01:49:54 -06:00
James Cotton
3acbfbe96c
Convert the pressure sensor code to most of the calculations as int64 to retain
...
precision.
2012-02-13 01:22:48 -06:00
James Cotton
4717af1afd
Swap telemetry port and gps ports back
2012-02-12 13:55:52 -06:00
James Cotton
f23f53dc4e
Add settings for the altitude kalman filter settings and init the state when
...
first measurement arrives
2012-02-12 09:07:27 -06:00
James Cotton
34ca5777dd
Kalman filter for altitude
2012-02-11 21:08:19 -06:00
James Cotton
d8f0494e57
Merge branch 'revolution' into revolution_overo
2012-02-11 20:02:20 -06:00
Alessio Morale
22b211167c
Ported pios_iap.c to F4
...
restored failed boot count check on pios_board.c for revo
2012-02-11 13:49:32 +01:00
James Cotton
3026527801
Now the desired altitude is relative to when the switch was flipped so that the
...
baro altitude module can use a smoothed altitude estimate for the starting
point.
2012-02-08 23:02:29 -06:00
James Cotton
80d602ef7b
Switch order of some commands to make sure it loads the correct hover throttle
2012-02-08 20:47:10 -06:00
James Cotton
ab41bae071
Separately smooth the error estimate from the derivative
2012-02-08 11:15:33 -06:00
James Cotton
60c951843d
Use backtracking to limit integral in altitude hold and smooth the velocity
...
error. Initialize the throttle integral better.
2012-02-08 10:39:31 -06:00
James Cotton
c6b1d6b8df
Rework the altitude hold code a bit
2012-02-08 09:42:10 -06:00
James Cotton
49a03a868b
Merge branch 'altitudehold' into revolution_overo
...
Conflicts:
flight/OpenPilot/UAVObjects.inc
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
flight/Revolution/Makefile
flight/Revolution/ins.c
2012-02-07 23:00:29 -06:00
James Cotton
6ec0f06c80
Back to 1024 byte packets
2012-02-07 13:02:11 -06:00
James Cotton
2c60447200
Switch back to 512 byte packets and fix bug when writing the header size that
...
was smashing the crc
2012-02-07 11:32:04 -06:00
James Cotton
221a0c5e53
Add the number of dropped updates to the overosync stats
2012-02-07 09:13:26 -06:00
James Cotton
a89d425b23
Reset the received rate for overo sync object
2012-02-07 09:01:58 -06:00
James Cotton
02bec750bd
In the attitude loop need to check all the queues even if unused or the event
...
system will have warnings
2012-02-07 08:46:34 -06:00
Stacey Sheldon
e2939dae2a
revo usb: Add support for USB to Revo
2012-02-07 02:25:31 -05:00
Stacey Sheldon
8b73ae7d16
remove trailing whitespace
2012-02-07 02:25:31 -05:00
Stacey Sheldon
b8c16fe7a5
hw defs: move misc defines and non-const data out of board_hw_defs.c
...
The board_hw_defs.c file should only contain static
const declarations that only describe the hardware.
All other non-const variables should be put into one
of the pios_board.c files.
2012-02-07 02:25:31 -05:00
Stacey Sheldon
3c1b1001f9
f4 usb: Allow USB descriptors to be const through ST APIs
2012-02-07 02:25:31 -05:00
Stacey Sheldon
56102013aa
f4 usb: correct function prototypes in bsp template
...
This file is not actually used but it should still be accurate.
2012-02-07 02:25:31 -05:00
Stacey Sheldon
57f9f6e3d1
f4 usb: configure and build ST USB OTG and USB DEV libraries
2012-02-07 02:25:31 -05:00
Stacey Sheldon
1e79ed6d54
f4 usb: fix invalid reference to stm32f4_discovery.h
2012-02-07 02:25:31 -05:00
Stacey Sheldon
04b81f13a7
f4 usb: fix invalid references to stm32f2xx.h
2012-02-07 02:25:31 -05:00
Stacey Sheldon
266b95561f
f4 usb: rename device template to real config file
2012-02-07 02:25:30 -05:00
Stacey Sheldon
a4ae844f2b
f4 usb: rename otg template to real config file
2012-02-07 02:25:30 -05:00
Stacey Sheldon
58bbe0870d
f4 usb: allow device->host data to be const
...
This allows the application code to pass const
descriptors to the Tx APIs in the STM32 USB
library.
2012-02-07 02:25:30 -05:00
Stacey Sheldon
4b911bb3be
f4 usb: remove unused device class examples
2012-02-07 02:25:30 -05:00
Stacey Sheldon
efbe8bbfdd
f4 usb: convert all line endings to LF-only
...
Line ending changes only. No functional changes.
2012-02-07 02:25:30 -05:00
Stacey Sheldon
6a43d1c7ed
f4 usb: Import pristine STM32F4 USB Library v1.1.0
...
Taken from version STM32F4-Discovery_FW_V1.1.0 of the
library from ST.
2012-02-07 02:25:30 -05:00
Stacey Sheldon
240425ff22
gdb: add config file for revo bl
2012-02-07 02:25:30 -05:00
Stacey Sheldon
1532338847
ef: fix dependencies in entire flash image build
...
ef_$(BOARD_NAME).bin files were not properly depending
on their fw and bl files resulting in the ef files not
being regenerated.
2012-02-07 02:25:30 -05:00
James Cotton
ae01936808
Add the portTickTime into the OveroSync stream
2012-02-06 10:00:02 -06:00
James Cotton
dbcb499d7f
Add object to monitor the overo link status. Current just records the bytes/s
...
being sent and the connected status (based on sending more than 500 bytes per
second)
2012-02-06 09:37:31 -06:00
James Cotton
5b2376dbee
Remove the semaphore for buffer swapping and make this occur during the receive
...
ISR. This leads to a possible condition where a copy is taking place in
userspace and then a buffer swap interrupts it. However, the copy should
always finish before the SPI DMA slave catches up to that place in memory at 10
MHz.
This fixes a common condition where the userspace task (low priority) was not
swapping buffers in time from user space and logs were corrupted.
2012-02-06 08:21:24 -06:00
James Cotton
179e66b754
Refactor how new packets are scheduled to avoid trying to start a transaction
...
from an ISR. This was causing lock ups. It's a bit higher latency probably
(trivially slow) but if we aren't keeping up with the Overo transactions then
using a proper DMA double buffer will be required.
2012-02-04 20:11:31 -06:00
James Cotton
665801662d
In cc3d update sensors add accelbias before scaling to allow more precision in
...
levelinIn cc3d update sensors add accelbias before scaling to allow more
precision in levelingg
2012-02-04 12:12:41 -06:00
James Cotton
4e190f99e2
Improved the revo overosync code to put multiple uavobjects into a packet
2012-02-04 12:06:03 -06:00
Stacey Sheldon
60a2af2e58
ef+dfu: Move EF image generation into separate makefile
...
A separate makefile for EF (Entire Flash) targets allows
the removal of board-specific hard-coded addresses. These
values can now be included from the board-info.mk files
for each board.
2012-02-04 12:03:42 -05:00
Brian Webb
3f66afd74a
Removed emacs mode header from pios_gcsrcvr.c
2012-02-04 08:42:16 -07:00
Stacey Sheldon
4fafbb13ed
makefile: Add EF (Entire Flash) targets for all boards
...
These new build targets will construct a flash image that
includes both a bootloader as well as a firmware image all
in one. Examples:
make ef_coptercontrol
make ef_revolution
This also adds support for a new target for writing this EF
image to boards that support a DFU interface (only F4-based
boards). This can be done by running:
make dfuutil_install
# Boot board with SBL asserted to activate STM32 DFU ROM
# Attach USB cable
make ef_revolution_dfu
Bootloader images are also now padded out to occupy the full
BL flash region.
2012-02-03 00:59:36 -05:00
Stacey Sheldon
ce544cf4ab
gdb: remove cortex_m3 remnants from revo gdb init file
2012-02-03 00:59:31 -05:00
Stacey Sheldon
99f5f20cb2
openocd: add support for stlink on stm32f4 targets
2012-02-03 00:51:31 -05:00
Brian Webb
a314604f9b
Added failsafe to GCS Receiver device.
2012-02-02 19:59:42 -07:00
James Cotton
18a64e261f
Going a bit overkill with this - deinit who SPI block between transactions.
2012-02-02 12:32:57 -06:00
James Cotton
c26154f303
Switch back to 256 byte packets and 0xFF pad the end
2012-02-02 11:40:49 -06:00
James Cotton
03cfb1453a
DeInit SPI DMA between transactions. Somehow if this doesn't happen the next
...
transaction doesn't start at the beginning again. Something is still not quite
right because first few bytes aren't getting across. Need logic analyzer.
2012-02-02 11:37:35 -06:00
James Cotton
77a6abb341
For PIOS_SPI F4 do not enable the TX irq. Also do not wait for the
...
transmission to finish either.
2012-02-02 11:24:14 -06:00
James Cotton
8b1137c6a0
Align the tx and rx SPI buffers from Overosync
2012-02-02 11:23:40 -06:00
James Cotton
0a71a48c57
Sending all FF finally again
2012-02-02 10:36:09 -06:00
James Cotton
80b839d145
The SPI3 TX DMA channel was wrong
2012-02-02 10:13:09 -06:00
James Cotton
29237f97ae
For SPI slave devices we need to handle the interrupt differently since
...
transactions should already be completed. Also reset the callback so in the
case of noise on the IRQ line it will not keep firing interrupts.
I suspect we should probably disable interrupts in this handler to prevent
refiring.
2012-02-02 10:13:09 -06:00
James Cotton
88b9f20cda
Fix nasty bug in the DMA stream configuration
2012-02-02 10:13:09 -06:00
James Cotton
95abb56d5e
Added module to send updates out the SPI port
2012-02-02 09:19:25 -06:00
James Cotton
e434ab94a9
Enable SPI port for revolution to overo communications
2012-02-02 01:42:38 -06:00
Alessio Morale
5449408763
Merge branch 'amorale/timerprescaler' into inoutch8
2012-02-01 00:23:53 +01:00
Alessio Morale
cb2dadd0ea
fix Motor 8 out not working
2012-02-01 00:20:50 +01:00
Alessio Morale
322ced44a1
Solve PWM Input 8 not working
2012-02-01 00:16:48 +01:00
Alessio Morale
820e8ac062
Handle different prescaler values for timers on APB1 and APB2.
...
The PIOS_MASTER_CLOCK has been removed in favor of
PIOS_SYSCLK (the master clock value,168000000 for revolution)
PIOS_PERIPHERAL_APB1_CLOCK and
PIOS_PERIPHERAL_APB2_CLOCK
Look at STM32F4xx_Revolution.h for the list of timer/peripheral and APB them belongs.
2012-01-28 20:04:55 +01:00
James Cotton
a778c45d6f
For L3GD20 sensor task run at the sensor speed
2012-01-28 10:11:30 -06:00
James Cotton
13447ac907
Fix the MPU6000 implementation
2012-01-28 00:21:58 -06:00
James Cotton
e07fca0465
Commit the revolution board_hw_defs.c file
2012-01-26 23:32:36 -06:00
James Cotton
b4435d0b35
For L3GD20 sensor task on revo update gyro once per physical sample
2012-01-26 23:29:12 -06:00
James Cotton
f311700804
Flashfs: Whenever failing out of a transaction unlock the semaphore
2012-01-26 14:14:50 -06:00
James Cotton
85bfa7dcf9
Flashfs: Missed calculation of the header crc for monolitihic write
2012-01-26 13:32:53 -06:00
James Cotton
84dd1dbc40
A bit more lenient settings for CC sensor timings
2012-01-26 13:00:06 -06:00
James Cotton
ad3d470f40
Flashfs and Flash: Add new function to write a series of blocks in one flash
...
write transaction to improve efficieny.
2012-01-26 12:39:35 -06:00
James Cotton
80705cdba1
Flash: Because on CC/CC3D the flash is initialized before FreeRTOS is started
...
we cannot use the transaction lock or the delay while saving.
2012-01-26 11:50:05 -06:00
James Cotton
4fc907ad0d
Add a transaction semaphore to flash and flashfs to make sure multiple saves
...
or loads can't be attempted between threads
2012-01-26 11:36:07 -06:00
James Cotton
8b15fdd88b
Flash: Add a vTaskDelay when waiting for flash operations to complete to
...
prevent blocking the bus from accels
2012-01-26 11:26:19 -06:00
James Cotton
7f38d113eb
Delete more old target stuff
2012-01-26 11:21:34 -06:00
James Cotton
e69a0937bc
Flash: Wrote status instead of read it
2012-01-26 11:17:00 -06:00
James Cotton
69dc5abf0c
Flash: Get rid of some defines and directly reference the cfg structure
2012-01-26 10:56:26 -06:00
James Cotton
6d572986e5
Flashfs: Clean up some of the JEDEC commands and also format whole chip when FS
...
is wrong.
2012-01-26 10:04:49 -06:00
James Cotton
fe7b9a909a
LED: Update the LEDs on revo
2012-01-26 09:11:27 -06:00
James Cotton
7eab883d5c
Fix some small revolution typos
2012-01-25 22:50:19 -06:00
James Cotton
20670d049b
Update pios_led for F4 targets to match the new F1 implementation. Also fix
...
type for F1 in GPIO labels.
2012-01-25 22:50:19 -06:00
James Cotton
727f0befc5
Make the gyro go a bit more regularly to stabilization but needs updating
...
regular CC
2012-01-25 22:50:19 -06:00
James Cotton
e4df3202e0
L3GD20: Update sensor task for revo to use the new queue
2012-01-25 22:50:19 -06:00
James Cotton
205aabe895
L3GD20: Make this sensor push data onto a FreeRTOS queue so that the sensor
...
reading task can block according. Also now the gyro data is sent to
stabilization multiple times per update of the attitude loop.
2012-01-25 01:20:07 -06:00
James Cotton
0da20bb846
Flash: Because most of the commands are a JEDEC standard rename this file
...
pios_flash_jedec and abstract out the methods that can vary between chips.
2012-01-25 00:23:24 -06:00
James Cotton
a02cad6f52
Flashfs: Separate out the sector sizes and magic values into a runtime
...
configurable structure. This makes it easier to deal with different chip
layouts.
2012-01-24 23:56:59 -06:00
James Cotton
1971ba30dc
No longer hardcode baudrate
2012-01-24 23:42:43 -06:00
James Cotton
5ad37e691c
USB: Update the USB configuration structure to include the GPIO that is used
...
for sensing and then load different config for CC and CC3D. Updated the
bootloader as well. Also changed the PIOS_USB_CheckAvailability function to
only return the sense signal and not the transfer_possible flag as this is not
set in time for the bootloader on CC3D for some reason.
2012-01-24 22:15:43 -06:00
James Cotton
bc3703ce33
Need more irq stack for CC3D
2012-01-24 19:48:52 -06:00
James Cotton
104c091590
Correct the range constants for the L3GD20 driver
2012-01-24 19:48:14 -06:00
James Cotton
a25d52785b
Change the bus speed for the L3GD20 to 10MHz and some small cleanups
2012-01-24 19:17:49 -06:00
James Cotton
3880b0ddc3
CC3D and CC use different CS lines for the flash chip. Add a second cfg
...
structure for each SPI interface.
2012-01-24 16:21:48 -06:00
James Cotton
587ec5a615
Revert earlier patch on filesystem for Revolution. Need to make erase command
...
and positioning of filesystem dependent on board type.
Reverted 99123372d0
2012-01-24 16:14:41 -06:00
James Cotton
b6c056fef2
Use the updated L3GD20 format and make attitude.c use the gyro data from the
...
fifo
2012-01-24 15:52:17 -06:00
James Cotton
c9263cb8c0
L3GD20: Dynamically allocate buffer structure when used
2012-01-24 15:51:38 -06:00
James Cotton
5efbfb02fa
Make the BMA180 sensor system acquire from the queue. Correct the orientation
...
and speed it up to 10 MHz communications.
2012-01-24 15:09:20 -06:00
James Cotton
8c208412c9
Give the BMA180 a dynamically allocated device structure and also make it
...
properly bind to a SPI and slave number. Temporarily reducing spi bus to
slowest possible speed.
2012-01-24 14:38:00 -06:00
James Cotton
aec7dd0b00
Initialize the LEDs early in the bootup process
2012-01-24 14:37:04 -06:00
James Cotton
8e79bc2ee2
Temporarily refactor attitude to directly read the sensors instead of pull from
...
their queues until the interrupts are working properly
2012-01-24 11:54:23 -06:00
James Cotton
e9552065a9
Reenable the CC3D sensors
2012-01-24 11:03:33 -06:00
James Cotton
466992a907
Migrate some of the CC board settings to the new board_hw_defs
2012-01-24 10:58:40 -06:00
James Cotton
c242ab8b86
Merge branch 'next' into revolution3
...
Conflicts:
flight/AHRS/ahrs.c
flight/AHRS/pios_board.c
flight/Bootloaders/Revolution/Makefile
flight/CopterControl/System/pios_board.c
flight/INS/pios_board.c
flight/OpenPilot/Makefile
flight/OpenPilot/System/openpilot.c
flight/OpenPilot/System/pios_board.c
flight/PiOS/Boards/STM32103CB_CC_Rev1.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/Revolution/Makefile
flight/Revolution/System/inc/pios_config.h
flight/Revolution/test.c
2012-01-24 10:46:35 -06:00
James Cotton
f029567e66
Remove meaningless settings from CC config file
2012-01-24 10:39:35 -06:00
James Cotton
66293a9788
Merge remote-tracking branch 'origin/stac/led-boottime-config' into next
2012-01-24 10:38:33 -06:00
James Cotton
7c22215e0b
Patch from Sambas to fix F4 on windows
2012-01-24 10:33:07 -06:00
James Cotton
486cdb5dbb
Got CC running again although with altitude and bmp085 disabled as well as the
...
CC3D drivers.
2012-01-24 10:32:42 -06:00
James Cotton
be50c00b7c
Make sure BMA180/L3GD20 can be disabled
2012-01-24 09:23:13 -06:00
James Cotton
4d3af7afbf
Add ID test to ADXL345
2012-01-24 09:23:12 -06:00
James Cotton
946c6a7f1d
Fix small bugs in pios_board.c relating to adxl345 spi configuration
2012-01-24 09:23:12 -06:00
James Cotton
728c05f973
Crude implementation of sensor reading for CC3D
2012-01-24 09:23:12 -06:00
James Cotton
0cb6b13d33
Add BMA180 to CopterControl 3D. Had to reduce the stack space by 256 bytes.
...
Some can be reclaimed by making the BMA180 allocate its fifo dynamically but
I'll do that later when it uses FreeRTOS queues for the FIFO.
2012-01-24 09:23:12 -06:00
James Cotton
11471ff68b
Update drivers for CC to the new EXTI system and SPI calls
2012-01-24 09:23:12 -06:00
James Cotton
a20d654744
Update the attitude algorithm for CC to use the Gyros and Accels UAVObjects
...
instead of AttitudeRaw
2012-01-24 09:23:12 -06:00
James Cotton
4cf82815ce
Get the right pios_iap.c from next
2012-01-24 09:23:07 -06:00
James Cotton
aaf1c5dfdd
Update the F1 SPI library to support multiple NSS lines
2012-01-23 23:27:02 -06:00
James Cotton
5fd458426a
Merge branch 'cc3d' into revolution3
...
Conflicts:
flight/PiOS/inc/pios_l3gd20.h
flight/PiOS/pios.h
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2012-01-23 22:09:45 -06:00
Stacey Sheldon
5907022b6d
Merge remote-tracking branch 'origin/stac/ld-2.22-fix' into next
2012-01-23 23:05:52 -05:00
James Cotton
bcb49cbd33
Merge branch 'next' into cc3d
...
Conflicts:
flight/PiOS/STM32F10x/pios_exti.c
2012-01-23 17:09:47 -06:00
James Cotton
2524662475
Copy the BMP085 back from next
2012-01-23 16:58:07 -06:00
James Cotton
b01d5c6b87
Include the drivers from the common directory
2012-01-23 16:58:07 -06:00
James Cotton
886d5456ac
Update pios_exti for F4
2012-01-23 16:55:54 -06:00
James Cotton
9a12299074
Update the driver cfg structures for the EXTI changes. Make the drivers call
...
the pios_exti_init instead of their individual implementations.
2012-01-23 16:55:52 -06:00
James Cotton
b2a292e9c4
Move all the drivers to the PiOS/Common directory to prepare for refactoring
...
the EXTI calls they make to the portable version
2012-01-23 10:11:46 -06:00
James Cotton
c84240e485
Merge branch 'next' into revolution3
...
Conflicts:
flight/PiOS/STM32F10x/pios_bmp085.c
flight/PiOS/STM32F10x/pios_exti.c
2012-01-23 06:51:30 -06:00
James Cotton
21ae37b3de
Remove BMP085 driver from F4 target
2012-01-23 06:44:25 -06:00
James Cotton
d864b481a1
Fix a few more merge conflicts
2012-01-23 04:47:35 -06:00
Stacey Sheldon
bfe6676eed
exti: rewrite exti layer to improve portability
...
The exti layer now allows drivers to register interrupt callbacks
during board initialization. All details of the driver using a
particular EXTI pin have been removed from the EXTI layer so it
can now be used on any board without board-specific modification.
This includes some nice refinements provided by Mike Smith during
initial review. His original commits have been squashed into this
one.
2012-01-22 23:23:41 -05:00
Stacey Sheldon
dc4aa07a32
board_hw_defs: factor out board-specific hw config definitions
...
Board specific HW configuration is now collected in a single .c
file for each board. This HW configuration is #include'd into
the FW, BL and BU builds for each board.
These new .c files are found in:
flight/board_hw_defs/<board_name>/board_hw_defs.c
Parts of this information were previously duplicated between
the BL and FW builds. This commit cleans up the duplication.
Using a #include on a .c file is a bit ugly but it allows us
to ensure that all of the symbols in the board_hw_defs.c file
are *ONLY* used in the PIOS_Board_Init() function for each
software build.
2012-01-22 19:41:41 -05:00
Stacey Sheldon
6bb4f0c61d
leds: use boot-time config for PiOS LED layer
...
LEDs are now configured based on a board-specific initialization
in PIOS_BOARD_Init().
LEDs are now named:
PIOS_LED_HEARTBEAT
PIOS_LED_ALARM
2012-01-22 18:22:59 -05:00
Stacey Sheldon
3cbf4499e1
ld: make sure current pointer never goes backwards
...
Fixes linking on ld version 2.22.
2012-01-21 21:18:06 -05:00
James Cotton
cc0cbf0381
Enable IAP code on revolution now
2012-01-21 13:22:39 -06:00
James Cotton
fe44a3d37a
Reference correct taskmonitor file compiled in to revolution
2012-01-21 13:22:17 -06:00
James Cotton
e505de7ba0
Remove redundant remap field from merge
2012-01-21 13:22:00 -06:00
James Cotton
838370b3a4
Fix calls to backup registers on F4
2012-01-21 13:21:37 -06:00
James Cotton
bb0bfe0ae4
Merge branch 'next' into revolution3
...
Conflicts:
flight/Bootloaders/CopterControl/Makefile
flight/Bootloaders/PipXtreme/Makefile
flight/Bootloaders/Revolution/inc/pios_config.h
flight/CopterControl/Makefile
flight/INS/inc/pios_config.h
flight/Libraries/taskmonitor.c
flight/Modules/Altitude/altitude.c
flight/Modules/Attitude/attitude.c
flight/OpenPilot/Makefile
flight/OpenPilot/Makefile.posix
flight/OpenPilot/System/inc/pios_usb_board_data.h
flight/OpenPilot/System/inc/taskmonitor.h
flight/OpenPilot/System/pios_board.c
flight/OpenPilot/System/taskmonitor.c
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_bmp085.c
flight/PiOS/STM32F4xx/pios_iap.c
flight/PiOS/pios.h
flight/Revolution/System/inc/pios_config.h
flight/Revolution/System/inc/taskmonitor.h
flight/Revolution/System/taskmonitor.c
ground/openpilotgcs/src/plugins/serialconnection/serialplugin.cpp
shared/uavobjectdefinition/systemalarms.xml
shared/uavobjectdefinition/taskinfo.xml
2012-01-21 11:27:03 -06:00
James Cotton
f8e59443b8
If the BMA180 isn't read when an IRQ fires (because the flash chip has claimed
...
the bus) then it won't fire another interrupt until read. For now this is
dealt with in the sensor loop by forcing a read when the fifo is empty.
2012-01-21 10:13:46 -06:00
James Cotton
f6db859e4f
Fix bug in flash driver where it could assert CS line after failing to claim
...
the bus. Also added a "claimed" flag to the device structure.
2012-01-21 09:57:12 -06:00
James Cotton
5dbbfec8a9
Make the BMA180 driver use the appropriate claim method from the ISR. Also
...
slow down this bus to 10 MHz.
2012-01-21 09:57:02 -06:00
James Cotton
ff0bd87f4e
PIOS SPI: Add a second claim bus method for use in ISR. This has no timeout
...
and uses an ISR safe queue claiming method. This avoids deadlocks when ISR
blocks other tasks from freeing the bus.
2012-01-21 09:07:06 -06:00
James Cotton
ec903449cd
Remove line that bypassed the BMA180 startup test
2012-01-21 08:46:32 -06:00
James Cotton
6d72678086
Add timeout in the sensor task for reading sensors to stop the watchdog firing.
...
All sensors should later be converted to use FreeRTOS queues.
2012-01-21 08:32:41 -06:00
James Cotton
476cb4d9c2
Unfortunately for now hardcoding new LED configuration. Need to generalize LED
...
out to a proper run-time configuration. This unfortunately breaks a general
firmware for now.
2012-01-20 15:45:51 -06:00
James Cotton
8935614a3f
Switch the gyro driver loaded based on the board revision flag from the
...
bootloader
2012-01-20 14:52:05 -06:00
James Cotton
a252ee134a
Fix the l3gd20 initialization in pios_board.c and also change the (ugly)
...
hardcoded exti system to use line3 on F1xx for L3GD20
2012-01-20 14:39:05 -06:00
James Cotton
c76e9f2d7a
Updates to the l3gd20 driver for stm32f1xx. Need to eventually merge these
...
drivers with F4 drivers.
2012-01-20 14:36:16 -06:00
James Cotton
4f28c8d48e
Change the init structures to be const in the std periph library for exti
2012-01-20 14:35:27 -06:00
James Cotton
a5d006d1a9
Set up the SPI interface to the l3gd20
2012-01-20 14:20:37 -06:00
James Cotton
8f535bd28c
Import of l3gd20 driver from revo branch
2012-01-20 13:42:58 -06:00
James Cotton
7f284596f2
Attempting to get flash and BMA180 to coexist
2012-01-20 13:33:21 -06:00
James Cotton
1e8811362e
On revolution attach the flash chip to the accel bus now. Also extended the
...
flash chip driver to take in the slave number during initialization so this is
no longer a hardcoded option.
2012-01-20 07:37:47 -06:00
Stacey Sheldon
64202ce092
Merge remote-tracking branch 'origin/stac/i2c_decoupling' into next
2012-01-17 22:35:36 -05:00
Stacey Sheldon
ad141c908a
Merge remote-tracking branch 'origin/stac/usb-composite-device-v2' into next
2012-01-17 22:26:38 -05:00
James Cotton
1b5e776dc5
Hardcoded scale for now since it isn't picking up from the cfg structure.
2012-01-17 19:53:20 -06:00
James Cotton
ce2d0fcbb1
L3GD20 data now running through IRQ -> FIFO
2012-01-17 19:36:32 -06:00
James Cotton
35025303cd
Getting data from gyro.
2012-01-17 19:29:38 -06:00
Stacey Sheldon
bffb184b7a
usb: add standard boilerplate to new files
2012-01-16 21:32:52 -05:00
Stacey Sheldon
ee0895aa77
usb hid: remove stale files from pipx
...
These files are no longer relevent for USB configuration.
2012-01-16 21:31:07 -05:00