rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-02 10:24:11 +01:00
Code Issues Releases Activity
2,292 Commits 5 Branches 8 Tags 266 MiB
3e9ee37c73
Commit Graph

1007 Commits

Author SHA1 Message Date
pip
0f7e0cf4db Removed PipBee folder 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1953 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-13 07:40:36 +00:00
les
6d6ec37474 Manual control: Changed 'Position' stabilization mode to 'Attitude' 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1944 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-11 17:58:11 +00:00
peabody124
dc10998152 Flight/Stabilization: Make any throttle < 0 reset the pid integral windup 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1933 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 00:46:06 +00:00
peabody124
5f601bf5ab Flight/Guidance: Enable for any type of quad airframe 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1932 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 00:46:04 +00:00
peabody124
e72b6051b5 AHRS: Make mag variance account for the vector length of magnetic field. Also 
moved around where the axis are swapped and made the negative sign come from
calibration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1931 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 00:46:01 +00:00
peabody124
ea85e98d7a Flight/Stabilization: Move update time storage to before the set to make sure 
it goes

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1922 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 15:38:28 +00:00
peabody124
8308e4a4fe Whitespace change: get rid of CR 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1921 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 15:38:26 +00:00
peabody124
4e6f100ae5 Flight: Swap to Les' code for main line 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1920 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 15:38:23 +00:00
peabody124
0a9ab6ca5f AHRS: Send PositionActual and VelocityActual out 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1919 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 15:38:19 +00:00
edouard
85aeffed9a Removed example settings from OpenPilot flight SW makefile too.. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1914 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-07 17:42:59 +00:00
peabody124
c4cb494a22 UAVOBjects: Just ran object genearator to get things compiling again 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1913 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-07 13:09:35 +00:00
kokomojoe
a0b3b47c48 OP-21 Flight/Bootloader - experimental modules implementing a simple serial packet (SSP) protocol. ssp_test is a test framework. ssp is the module, main_ssp.c prototype module on how this could be used in the bootloader, it is not fully functional, additional logic required for start-up detection to decide if serial initialization is required. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1909 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-07 04:59:18 +00:00
darkz
6b8aba07b1 Updated Makefile.posix to reflect the removal of example code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1907 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-07 02:50:12 +00:00
edouard
5c48c29612 Remove example objects from the flight code, not needed anymore 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1905 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 21:50:57 +00:00
sambas
e32ddd5230 Flight/AHRS: gyrotemp raw actually shows now raw temp 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1903 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 18:14:12 +00:00
peabody124
dea5c91646 AHRSCalibration: Make default values correct now Les extended 
uavobjectgenerator to support multiple fields (thanks Les!).  Also
changed default scale on mag to +/-6g

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1899 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 14:26:42 +00:00
peabody124
66bf9d53d4 AHRS: Paramaterize the variance used for the indoor algorithm. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1898 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 14:26:40 +00:00
kokomojoe
946283d67e OP-185 Flight - Added FirmwareIAP to the module load list in makefile, added uavobjectsinit.c with firmware IAP init calls 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1896 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 05:30:48 +00:00
kokomojoe
7cf0e9ba31 OP-185 Flight support for firmware IAP object. added the pios_iap.c and firmwareiapobj.c 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1895 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 02:58:07 +00:00
kokomojoe
6499da40e3 OP-185 Flight Added init function for PIOS_IAP helper functions. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1892 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 02:07:11 +00:00
kokomojoe
2fe266650f OP-185 Flight - support files for Firmware IAP object 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1891 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 02:06:13 +00:00
kokomojoe
20c6e2292a OP-185 Flight helper functions for the firmware IAP object. Allows setting/clearing of back-up registers 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1890 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 02:02:37 +00:00
les
7ddb0f6f80 Stabilization: Changed to new switch format. Both position and rate modes work. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1886 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-05 14:51:33 +00:00
les
1e26ca11ee Manual control: Added some extra room at throttle zero when detecting a faulty signal 
Before, moving your throttle trim slightly could cause ManualControl to think the receiver was not connected

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1885 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-05 14:50:03 +00:00
les
b2c81aceee Actuator: Fixed motors not going to min throttle in failsafe. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1884 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-05 14:47:48 +00:00
peabody124
ba3ecada1d Flight/ManualControl: Implemented settings to change what the Mode switch does 
so it can also change parameters of Stabilization.  Please check your aircraft
behavior with this patch, but default behavior should be unchanged.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1878 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 19:48:09 +00:00
les
3aa72835d6 AHRS comms: Added GPL text 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1876 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 15:29:41 +00:00
peabody124
f03669733b Flight/Guidance: Merge back into one task because memory requirements of a task 
exceed CPU requirements of PID.  Also add add lesstabilization UAVObject to Makefile
to fix compile errors.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1870 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 02:01:34 +00:00
peabody124
d71e9df8c5 Flight/UAVObjects: Add a few files that were missed earlier, and get posix 
worlking again

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1869 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 02:01:31 +00:00
les
05a85c8c95 New stabilization module based on PI-P algorithm used in FlightOS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1864 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 20:39:23 +00:00
les
dcef777ab0 AHRS SPI comms: Retries were not being tracked correctly 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1863 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 20:36:20 +00:00
peabody124
e743678d89 AHRS: This fixes the mags, I forgot to normalize the magnetic flux at your 
home location.  If you use INSGPS_INDOORS make sure your HomeLocation.Be fields
are correct for your GPS coordinates
http://maps.alfiordalis.com/declination.html

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1862 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 20:35:22 +00:00
cwabbott
8d1a99ae15 PiOS.win32: Updated PiOS.win32 makefile for recent UAVObject changes, and also updated the experimental stabilization code to comply with recent changes to the simple code. Nobody uses SiTL anymore :( . 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1858 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:59:58 +00:00
les
11cf24a312 Actuator: Fixed uninitialised variables 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1857 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:37:07 +00:00
peabody124
1931c75a4c AHRS: Deal better with DMA errors 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1856 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:14:36 +00:00
peabody124
a9495e2cbb UAVObjects/AttitudeSettings: Remove unused object, moving data to AHRSettings. 
Added attitude bias to AHRSSettings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1855 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:14:34 +00:00
peabody124
754200f9cf UAVObjects/Delete old VTOLSettings object 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1854 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:14:27 +00:00
edouard
eeb5eab177 Flight/Stabilization: fix for -180/+180 yaw transition which caused glitches in the stab module. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1853 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 16:43:10 +00:00
peabody124
840df39b78 AHRS: Export gyro data as deg/s instead of rad/s to match the object label 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1851 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 15:22:09 +00:00
peabody124
9165fb87b2 AHRS: Calibration values were sent but not locked into EKF 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1847 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 04:34:07 +00:00
peabody124
87a822e3f9 AHRS: Add back home location setting north axis 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1846 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 04:34:05 +00:00
peabody124
5c9b5f4a99 AHRS: Get calibration working again 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1842 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 03:10:04 +00:00
peabody124
0c30101f54 AHRS: Made an object setting to allow the downsampling rate to be changed on the 
fly (EKF rate up to a limit).  Also, now the algorithm selects if you are
indoor or outdoor as well as if you use a mag indoor (if you do set the z
variance higher than it calibrates to).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1841 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 03:10:01 +00:00
peabody124
104dc165a9 AHRS: Max downsample that doesn't cause huge amounts of drops right now is 20 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1840 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:34 +00:00
peabody124
29b087703b Flight/AHRSComms: Decrease stack size, not needed to be that big. Also made 
ActuatorDesired dT in ms like the uavobject indicates

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1839 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:32 +00:00
peabody124
6d39d85b8f UAVObjects/AHRSStatus: Remove unused fields 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1838 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:29 +00:00
peabody124
2050864e59 UAVObjects/VTOLStatus: Remove unused object. Also added update time to 
indicate stabilization loop time.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1837 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:26 +00:00
peabody124
0fd9fda7a6 Flight/AHRS Comms: Whitespace fixes 
gnuindent -npro -kr -i8 -ts8 -sob -ss -ncs -cp1 -il0 -hnl -l150

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1836 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:22 +00:00
peabody124
ea3fb03c7f Flight/AHRS Communications: Switch to Les' very nice UAVObject communication 
scheme

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1835 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:18 +00:00
corvus
62300c9682 flight/Libraries/CoordinateConversion: ECEF2LLA() - Speed up the calculation with a primer coordinate. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1834 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 20:30:34 +00:00
peabody124
2a93f35807 UAVObjects/MixerSettings: Have values as int8, don't need float resolution 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1832 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 20:28:14 +00:00
les
683aa2b480 AHRS: Tidied up calibration sequence 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1831 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 19:41:00 +00:00
les
b2d56ca34c AHRS: Added UAVObject based SPI communication between AHRS and OP. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1830 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 17:31:13 +00:00
les
498f3d0fa6 PIOS SPI: Added a function to detect if the channel is busy 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1829 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 16:52:20 +00:00
edouard
d2c1014e29 Re-enabled yaw stabilization after SystemSettings changed. There might be a lingering issue when the 
yaw angle crosses the zero-360 mark, beware.
You can disable yaw stabilization by setting all PID gains to zero for yaw.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1828 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 16:26:43 +00:00
peabody124
d54c6bf0f8 Flight/Actuator: Use dT in seconds. Forgot to change MaxAccel. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1825 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 14:37:03 +00:00
peabody124
0dfdad4fc4 Flight/Actuator: Reset critical alarm 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1824 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 14:09:14 +00:00
peabody124
c076a695ce UAVObjects/ActuatorSettings: Default values are all 1000 now so that an 
unconfigured motor can't turn on.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1823 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 13:45:26 +00:00
peabody124
9f4e3906e3 Flight/Actuator: Made it use the detected dT for the feedforward computation 
and removed the unused field from actuator settings (old setting time and all
the aircraft specific stuff).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1820 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:33 +00:00
peabody124
2dc40d11a1 Flight/Stabilization: Use the system clock to determine time from previous 
update since now drive by events.  This means StabilizationSettings object
changing so write down your settings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1819 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:29 +00:00
peabody124
4461aba6d6 Flight/Stabilization: Move to object event system. Latency from ahrs_comm 
update to actuator update now ~0.7 ms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1818 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:26 +00:00
peabody124
b9943645e0 Flight/Actuator: Run actuator from queue again, latency well behaved. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1817 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:20 +00:00
peabody124
e2d63cbf19 Flight & Ground/AHRS Calibration: Made variance estimation into a two pass 
approach again because ran out of numerical precision for single pass.  Also
made ground force the gyro signs to be correct.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1806 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-30 04:30:29 +00:00
sambas
ee4ca7b93a OP-177 Flight: All alarms fixed, AHRSComms stack size made critical stack alarm, event warning caused by queue that is not used at the moment. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1801 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-29 19:06:35 +00:00
peabody124
a4e0ee5fdf Flight/Actuator: Move Les' actuator to the active one 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1800 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-29 18:51:36 +00:00
peabody124
2f6f76d578 Flight/Actuator: Remove old mixer code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1799 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-29 18:51:34 +00:00
sambas
2d90a80e22 Flight/PiOS: this patch makes dosfs work with both MBR and VBR formats. Backup your SD files in case this messes something!! Testing needed. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1798 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-29 16:29:38 +00:00
peabody124
c95b1e6117 Ground/UAVControl: Working joystick support although currently not configurable 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1794 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-29 03:59:03 +00:00
kokomojoe
6f1f990d85 OP-21 AHRS/Bootloader - Moved start of user code to 0x08002000. Must be used with latest AHRS Bootloader compiled with DEBUG=OFF. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1788 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-28 02:21:48 +00:00
fredericg
f090b4bcf8 OP-174 ET OSD: Fixed build errors due to UABObject changes 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1786 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 19:56:25 +00:00
peabody124
9b1d258a94 Flight/Les/Actuator: Space->Tab, somehow slipped passed previous patch 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1784 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 17:30:42 +00:00
peabody124
aa42256ad1 Flight/Stabilization: Convert all PID loops to units of seconds instead of ms. 
THIS MEANS YOU MUST RETUNE YOUR PID LOOP IF YOU'RE FLYING WITH IT

Alternatively divide Kd by 1000 and multiply Ki by 1000

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1782 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 09:04:43 +00:00
peabody124
fef8cca5b6 Flight/Posix: Get compiling again (sorry Corvus, I think I messed up your 
change earlier)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1778 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 07:28:48 +00:00
peabody124
3c021c09d9 Flight/PiOS: Whitespace changes 
find ./flight/PiOS/inc/ \! \( -name '*~' -a -prune \) -type f    | xargs -I{}
bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss -ncs -cp1
-il0 -hnl -l150 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1777 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 07:28:45 +00:00
peabody124
6d0df704a7 Flight/Modules: Corrected code to use tabs 
find ./flight/OpenPilot/Modules/ \! \( -name '*~' -a -prune \) -type f    |
xargs -I{} bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss
-ncs -cp1 -il0 -hnl -l150 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1776 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 07:28:34 +00:00
peabody124
b85e322206 Flight/FlightSituation: Remove unused module 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1774 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 07:28:21 +00:00
peabody124
da583e0914 Flight/Guidance: Disable by default 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1768 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 03:07:40 +00:00
peabody124
6d811cc4db OP-140 AHRS: Don't run INSGPS until OP says board is initialized. This will 
also block heart beat.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1767 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 03:06:57 +00:00
peabody124
8475a68958 Flight/Stabilization: Keep command and error in deg/s for rate stabilization 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1766 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 03:06:54 +00:00
peabody124
a3ea9a5461 AHRS: Add a weak mag correction in indoor mode to remove gyro bias and try and 
get a reliable heading

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1765 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 03:06:51 +00:00
peabody124
77b68e5169 Flight/Guidance: Initial template for guidance module 
Flight: Create PositionDesired (the active waypoint) UAVObject and make the FlightSituationActual no update since it not used.
Flight: New velocity desired object that passes information between the look computing the desired velocity and the PID loop to get it (updated at different rates)
UAVObjects/PositionActual: Remove unused GPS fields
UAVObjects/PositionActual VelocityActual: Split the velocity into a separate object.  ALso make sure all the information telemetered around is in cm to avoid using floats.
UAVObject/GuidanceSettings: New guidance settings object for the guidance module
Flight/Posix: Add the new objects to the Posix sim
Flight/Guidance: Computes a desired velocity based on position error than runs a PID loop to control roll and pitch to achieve that velocity.  All distances are in cm, and updated the PositionActual fields to reflect this and use int32.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1760 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 03:06:27 +00:00
kokomojoe
ca4f3b53fa OP-21/Flight Bootloader - added compiler and linker options to remove unused functions. Code is now smaller. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1759 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 02:34:04 +00:00
zedamota
9b05282be5 OP-21/Flight Bootloader - should make things cross platform. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1758 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 00:39:01 +00:00
zedamota
0371808099 OP-21/Flight Bootloader - should make things cross platform. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1757 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 00:36:42 +00:00
peabody124
a01783b2a8 OP-140 AHRS: Explicilty deal with if it is initialized or not, use that to 
determine retransmitting calibration, home location and such.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1755 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-25 21:05:38 +00:00
peabody124
9b28f2d72c OP-167 OP-157 AHRS/Calibration: Added mag scale and really cleaned up calibration. 
Calibration should take less time now too (using second moments to estimate
variance in one pass).  Now need to change to multiple messages to get the
calibration in to keep the request message size minimal.  Also currently
running sensor calibrate doesn't store the gyro bias so if you want to use this
you'll have to tweak it manually.  I'll fix that step tomorrow.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1741 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-25 09:20:38 +00:00
edouard
eedf85a5ac OP-138 Start of the new Mixer configuration interface, for fixed wing only. This does not work yet, takes a long time to fully implement. 
The system settings UAVObject is updated, you will have to recompile your firmware. If you want to take a look and let me know, please do!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1737 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-24 20:39:37 +00:00
zedamota
095cbb4dd5 OP-21/Flight Bootloader - Now pulls SS pin low again if no AHRS is found. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1733 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-24 15:46:59 +00:00
corvus
1472b342c1 1.0 Featur Freeze - 
Removing some Experimental and Incomplete Modules and their UAVObjects not suited for 1.0
- they will be moved into an experimental branch:

Navigation     : experimental code only
FlightSituation: experimental code only 
Guidance       : preliminary draft - possibly to be replaced by peabody124 position hold code if finished in time.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1729 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-23 22:05:03 +00:00
corvus
e44045f422 OP-165 : Guidance Module 
Creating GuidanceModule together with PositionDesired UAVObject (as discussed),
so dschin and me can work on it :-)
Will compile and (on sim_posix) execute, but PID logic is yet untested and preliminary.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1722 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-22 22:16:48 +00:00
les
ef7ee86d45 Mixer: zero throttle shuts off motors and changed MixernMatrix to MixernVector 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1710 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-21 19:31:17 +00:00
peabody124
a1a3b0774f Flight/AHRS: Update code to coding conventions. 
find ./flight/AHRS/ \! \( -name '*~' -a -prune \) -type f    | xargs -I{} bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss -ncs -cp1 -il0 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1707 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-21 19:29:39 +00:00
peabody124
833e8428d2 Flight/Libraries: Updated to coding conventions 
find ./flight/Libraries/ \! \( -name '*~' -a -prune \) -type f    | xargs -I{} bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss -ncs -cp1 -il0 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1706 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-21 19:29:35 +00:00
chebuzz
862e35def1 OP/PiOS.posix - Somebody added UAVObjects but did not add them to the posix sim 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1702 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-21 14:16:14 +00:00
peabody124
f96654ace1 Adding mixerstatus/mixersetting uavobject files that were missed 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1701 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-21 07:08:51 +00:00
les
875437f483 Added matrix based actuator mixing. Note the makefile is set to use the original actuator code. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1698 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-20 19:27:08 +00:00
sambas
24840b461d OP-22 Flight/PiOS: added failsafe and recovery "watchdog" timer 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1697 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-20 18:00:31 +00:00
zedamota
5fb45f835e OP-21/Flight Bootloader - Bug fix, 1 more 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1696 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-20 17:09:06 +00:00
zedamota
87dc0908ce OP-21/Flight Bootloader - Bug fix 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1695 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-20 16:29:34 +00:00
zedamota
3ba6372dc4 OP-21/Flight Bootloader - Clean up and linker files for the AHRS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1691 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-19 18:27:53 +00:00
zedamota
128df749f0 OP-21/Flight Bootloader - small bug fix 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1683 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-18 23:38:45 +00:00
zedamota
c9752a6a3a OP-21/Flight Bootloader - some changes for the bootloader to work 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1682 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-18 23:11:42 +00:00
zedamota
1b9811aa0e OP-21/Flight Bootloader - AHRS programming fully working 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1681 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-18 23:10:26 +00:00
zedamota
97b44ffb04 OP-21/Flight Bootloader - Various fixes. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1678 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-18 00:46:34 +00:00
peabody124
11f2b1a8dc Flight/Stabilization: Dont cap error at maximum stabilization value - that is to scale control throws. Create another variable if we want this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1676 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-17 18:15:02 +00:00
peabody124
0ea95fbad1 AHRS: Separate covariance prediction from state prediction to get updated state out of spi a few milliseconds sooner. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1675 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-17 18:15:00 +00:00
peabody124
92c36114f3 AHRS: No longer reinit after a comms glitch. Allow time for EKF to converge (2-3 seconds) after power up. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1674 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-17 18:14:20 +00:00
peabody124
8e0c5136c0 AHRS/Comms: Make the polling delay 1ms instead of 20ms to make sure if a message isn't ready we don't pause for a long time. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1673 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-17 18:12:25 +00:00
andrew
da1a762072 Added basic code for Yaw stabilisation in manual mode for Helis. 
This is functionally the same as having a heading hold gyro in hardware.
Code is copied from the simple stabilisation routine and is a bit rough at the minute, but initial testing looks good.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1670 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-17 05:52:34 +00:00
peabody124
41b7a99883 Flight/Stabilization: Yaw rate stabilization error should be normalized by dt 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1669 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-17 02:00:55 +00:00
peabody124
a6ca5b82e7 OP-155 Flight/HID: Make the HID stall when buffer full. Not sure the consequences on ground (i.e. if it handles the stall correctly) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1665 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 20:23:02 +00:00
zedamota
e8d6e7c557 Flight - Centralized board specific files, BL and User FW uses the same board definitions, no need to have 2. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1663 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 19:19:38 +00:00
peabody124
3b015b41c5 Flight: Got a much nicer arming/disarming system going. Made it a separate flag in the end to allow testing the stabilization code with motors not running. Also changes maxRoll/maxPitch/maxYaw to uint8 to keep object size smaller - no reason for float precision for this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1660 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 15:41:11 +00:00
peabody124
a6e71177e4 AHRS: Yaw stabilization now supports rate stabilization or heading hold. Also need to cleanly support rate stabilization on all the other axis. Les suggested this be in manual mode which will require changing the logic somewhat (essentially for vtol it will always be running through the Stabilization module) in an aircraft dependent manner. An alternative would be a stabilization flag indicating to do full attitude hold, attitude + yaw stabilization, or all axis gyro stabilization. This would be my preference. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1659 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 15:41:08 +00:00
peabody124
110c46216e OP-155 Flight: Increase the pios_com buffer size to support these larger objects. If this gets worse and we don't want to use as much OP memory we can make it stall the USB bus when the buffer is full. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1657 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 05:57:03 +00:00
peabody124
832b61ab86 OP-117 AHRS: Binary streaming of the raw data within EKF. Doesn't keep up while running this but does give accurate data that went into algorithm. Once we can dynamically change sampling rate will be good. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1655 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 05:26:14 +00:00
peabody124
0b8756d55c OP-148 AHRS/Comms: For now don't retransmit calibration after comms glitch as this re-zeros gyro bias and makes attitude stutter. Need to explicitly communicate when comms glitches and query if AHRS actually rebooted. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1654 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 05:26:12 +00:00
peabody124
885c966e53 AHRS: Added a tracker for number of ADC updates the EKF misses. Also updated the Telemetry autogenerated files to accomodate the 11500 baud rate. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1652 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 02:59:00 +00:00
peabody124
ff1b303083 AHRS: Only do EKF correction with mag when new data available 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1651 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 02:58:56 +00:00
peabody124
19e80da928 AHRS: Update UAVObject with information about AHRS rate 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1650 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 01:54:21 +00:00
zedamota
4d0d865c31 OP-21/Flight Bootloader - fix to paths 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1647 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 18:03:52 +00:00
pip
82be9117d6 Added USART baudrate defines into pios_board.h & '#if defined's into pios_board.c 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1646 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 17:37:50 +00:00
pip
d2bc126e68 Added PIOS_COM_AUX_BAUDRATE to pios_board.h & '#if defined' to pios_board.c for easier baudrate setting. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1645 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 17:33:00 +00:00
pip
73c8194acc Added PIOS_COM_TELEM_BAUDRATE, PIOS_COM_GPS_BAUDRATE, PIOS_COM_AUX_BAUDRATE & PIOS_COM_SPEKTRUM_BAUDRATE defines in pios_board.h with '#if defines' in pios_board.c for easier baudrate changing. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1644 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 17:18:38 +00:00
zedamota
3e89e388fa OP-21/Flight Bootloader 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1643 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 17:09:27 +00:00
zedamota
c72a5b1cfe OP-21/Flight Bootloader 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1642 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 17:08:24 +00:00
zedamota
f972b78bfb OP-21/Flight Bootloader 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1641 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 17:07:43 +00:00
pip
cf864225fe Added easier to find USART baudrate setting PIOS_USART_BAUDRATE. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1640 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 17:07:37 +00:00
zedamota
50b7931a1c OP-21/Flight Bootloader - new bootloaders 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1639 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 17:06:51 +00:00
pip
89fb0b8582 Made pios_hmc5843_data_ready volatile (accessed by both interrupts and main exec loop). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1638 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 17:00:36 +00:00
zedamota
df88140f51 OP-21/Flight Bootloader - Remove deprecated bootloaders 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1637 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 16:58:00 +00:00
stac
1017d0294b ahrs: always enable -g for gdb debug symbols 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1635 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 15:45:41 +00:00
stac
7886a617dc Revert "ahrs: No longer support -O0 since it doesn't fit" 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1634 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 15:45:39 +00:00
pip
22b9b2512e Added a 115200 baud telemetry option to the OP main board/UAVTalk. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1632 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:43:42 +00:00
stac
73787f7f15 ahrs: No longer support -O0 since it doesn't fit 
Leaving debug on allows the -g option to be enabled
so that we can have symbols in gdb even though we're
forcing the optimization flags to -Os.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1631 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:21:06 +00:00
stac
cdb8aa37a0 ahrs: Only read mag data when it has been updated 
The AHRS mainloop was reading the mag data on every
loop regardless of whether new data was actually
available.  Now that the MAG_DRDY signal is monitored,
we can read only at the rate (10Hz) new data is actually
produced by the sensor.

This also enables future improvements that will remove the
filtering work that is still being done on the mag data on
every iteration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1630 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:21:05 +00:00
stac
55d90970ed hmc5843: hide internal #defines and functions 
Way too much was being exposed in the API for the
HMC5843.  This commit properly hides internal
details of the driver.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1629 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:21:04 +00:00
stac
0e7a801e9e hmc5843: Add support for DRDY signal from magnetometer 
The DRDY signal from the magnetometer is connected to PB8
on the STM32.  This pin is now configured as an external
interrupt and is now used to signal when new data is
available from the magnetometer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1628 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:21:02 +00:00
stac
4ac001553d hmc5843: convert line endings from CRLF to LF 
No functional changes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1627 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:21:00 +00:00
stac
ac6989fbeb bmp085: fix configuration of EOC interrupt 
The EOC EXTI interrupt configuration was incorrectly
pointing at GPIOG pin 8 rather than GPIOC pin 15.
This was preventing the EOC interrupt from working
properly.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1626 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:20:59 +00:00
stac
88e73906d0 i2c: Add recovery code for i2c bus errors 
I2C bus errors are now recoverable.  The bus is properly reset
and an error indication is now provided to the caller whenever
a bus error occurs during processing of the transaction list.

For now, the users of the I2C layer just retry infinitely on
failure.  The BMP085 and HMC5843 code should be changed to
report errors to its callers to allow a more sensible retry
strategy.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1625 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:20:57 +00:00
stac
0122394481 i2c: consolidate handling of AUTO transitions 
AUTO transitions in the FSM are now handled immediately
after processing each newly injected event rather than only
at the end of the EV ISR.

This consolidation allows the upcoming addition of event
injection from both the EV and ER ISR contexts.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1624 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:20:56 +00:00
stac
7d5463e5e6 i2c: Move polling for bus stopped from ISR to task/mainloop 
Occasionally, the I2C driver races with the STM32 I2C peripheral
at the end of a bus cycle.  This leaves the bus in an errored
state and the stop condition is not properly asserted on the bus.

The polling for the stopped condition was previously implemented
in ISR context since it was expected to be nearly instananeous.
In the error condition, however, the stop condition will never
happen.  The polling for this case is now done by the initiating
task (or mainloop on the AHRS) to prevent the timeout condition
from triggering the watchdog.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1623 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:20:55 +00:00
stac
65ad2caf8a i2c: Make transaction initiator available in txn list 
The info field in the pios_i2c_txn list can now be used
to provide a const string which describes the context
for this transaction.

This is very helpful when diagnosing an error that occurs
somewhere in the middle of the I2C FSM since the FSM runs
primarily in the ISR where the original context for the
transactions is no longer available in the traceback.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1622 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:20:53 +00:00
stac
85c60479c1 i2c: rename FSM faulted state 
Differentiate the _FSM_ faulted from the (soon to
exist _BUS_ faulted state.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1621 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:20:52 +00:00
stac
139da048f6 ahrs: remove unused debug code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1620 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:20:51 +00:00
pip
cc3860daaf Added 'uint32_t PIOS_SYS_getCPUFlashSize(void)' into pios_sys.c/h files. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1616 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-14 09:18:55 +00:00
peabody124
c5fe985a45 AHRS: Gets timing working correctly to compute the EKF rate and idle time in real values 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1615 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-14 07:03:36 +00:00
peabody124
0875dc8442 AHRS: First pass refactoring the ADC code into another function. Still want to clean up a few constants make the downsampling go into a smaller circularbuffer nicely. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1614 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-14 07:03:34 +00:00
peabody124
1051d894b9 AHRS: Merged in some new code from Dschin that expliclity writes the prediction terms in the covariance matrix. Also made changes to compile with -Os. Now runs around 125 - 150 Hz depending on corrections used (this will become adjustable from GCS shortly). 
Squashed commit of the following:

commit 897e3365ab6c762584c34238efd12dc144e72af0
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 22:15:21 2010 -0500

    AHRS: Getting it running nice and quickly.

commit 53d72fb849164730c89873cab81c9e09be0b112b
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 15:57:46 2010 -0500

    AHRS: Make more variables volatile for -Os.

commit 4fa90821b5d3d8c2ea5e67756313a8a63c0eeb8c
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 15:11:31 2010 -0500

    AHRS/Makefile: -O0 not added to allow me to try various space flags that don't break code.

commit 5bd17a304dc28dc271c2f3e8c6cb8ad4a830404f
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 14:44:05 2010 -0500

    AHRS: Make debuggign USART easy to disable

commit 5453f2a7939492769fe9e9cc822e69c107320670
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 14:38:37 2010 -0500

    AHRS: Explicitly expand covariance prediction.  Brings computations from 160 to 90.  Makes it not fit in AHRS though.

commit b6712da7eece2a464a2073d24b77be22bfa47094
Author: James Cotton <peabody124@gmail.com>
Date:   Sun Sep 12 22:59:42 2010 -0500

    AHRS: Make it easy to comment out the I2C/Magnetometers.

commit 8c84d0091f3d6f6bedc7a0224a4ed9cb099b022b
Author: James Cotton <peabody124@gmail.com>
Date:   Thu Sep 9 00:49:50 2010 -0500

    AHRS: Small change to INSGPS analysis tools

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1613 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-14 06:42:56 +00:00
pip
7da2fc2ba7 made ahrs_state 'volatile' in ahrs.c to prevent compiler optimization lockup 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1612 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-13 20:56:58 +00:00
pip
8bfaa997d3 made curr_state 'volatile' in pios_i2c_priv.h to prevernt compiler optimization lockup. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1611 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-13 20:52:56 +00:00
peabody124
4a4932e5ff AHRS/FSM: Small initialization detail to make compile with -Os 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1610 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-13 19:04:37 +00:00
zedamota
66560786f4 Flight - #ifdefs to make it work with both normal and bootloader packet formats. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1609 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-13 17:08:52 +00:00
chebuzz
3b5b129445 Fix POSIX simulator to work with new VTOL UAVObjects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1607 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-13 14:00:53 +00:00
peabody124
47a7b8548b Flight: Safety feature for VTOL. Don't enable motor until throttle brought above .5 then below or to zero. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1604 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 22:18:21 +00:00
peabody124
76971a807c AHRS: Some more tweaking of the timings. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1603 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 22:18:18 +00:00
zedamota
257b4d2c95 flight - BL AHRS Comms - fixes to make it compile, not tested yet. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1601 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 21:08:43 +00:00
peabody124
ba34bb8c24 AHRS: Oops, didn't notice the message processing was removed from end of loop. Adding back. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1597 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 12:44:57 +00:00
pip
d0b8a9755d Added USB_LED_ON/USB_LED_OFF and checks to see if they are defined to the PIOS_USB_HID_ChangeConnectionState function .. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1596 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 10:47:20 +00:00
pip
9fca16db41 Added an RTOS detection is 2 places because I'm using this file on the modem (without an RTOS). #if defined(PIOS_INCLUDE_FREERTOS) ... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1595 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 10:33:45 +00:00
peabody124
59758122e1 AHRS: Cannot process messages while idling as this makes the main loop execution time non-deterministic based on OP (i.e. could get three messages and push the time up). It would be a nice featuer since you can get a raw and EKF update in the same step, but if the AHRS_Comm loop is fast (which is should be to keep update latency low) then this will hammer the AHRS with redunant requests. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1594 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:51 +00:00
peabody124
e90e714c2b Flight: Tweaked the throttle handling and VTOL use of it to make sure engines can be shut off easily in stabilization mode. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1593 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:49 +00:00
peabody124
56131476ef AHRS: Switch to sampling at 2khz, plenty of CPU usage. However need to make EKF rate different for outdoor mode with this patch because otherwise will drop samples :-( 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1592 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:47 +00:00
peabody124
5d1ebf76ea Flight/VTOLmixer: Fix bug in mixer that messed up roll mixing. Also changed minimum to -1 so that neutral can be position motors come on and -1 the off position. Also made failsafe throttle value -1 to be consistent. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1591 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:44 +00:00
peabody124
c376711405 Flight/Stabilization: Make the derivative account for the sampling time (dAngle/dt) for the PID loop since integral does and also make the integral bounds uavobject settings. It was originally bounded by constant/Ki but I'm not sure why as you change the gain of the error integral you also want to decrease the maximum error it can cause. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1590 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:41 +00:00
peabody124
8999355327 Flight: Made actuator a periodic task. I don't think the queue is low enough latency - should figure out how to make this happen as callback is the right way to go. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1589 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:38 +00:00
peabody124
dceb20b16d Flight: VTOLStatus object that returns the thrusts on all the engines 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1588 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:34 +00:00
peabody124
bba3b0c64a Flight: VTOLSetings object to contain the mixer settings for VTOL crafts 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1587 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:30 +00:00
stac
d18e0c3ef8 ahrscomms: Add low-level message code for bootloader msgs 
Implement low-level utility functions for sending/receiving
the opahrs proto v0 (bootloader) messages.  These are used
by the OP firmware loader and the AHRS bootloader.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1586 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-11 23:06:31 +00:00
stac
c3c8a30bfc ahrscomms: fix return values on error 
Some functions were returning -1 instead of one of the
valud enum values.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1585 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-11 23:06:29 +00:00
stac
6bf3038f3f ahrscomms: provide helper function for simple requests 
This cleans up some of the boiler plate code that is
repeasted for simple (empty) requests that expect a
response.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1584 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-11 23:06:28 +00:00
stac
7ecbb5f5b8 opahrs_proto: Add new boot and versions messages 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1583 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-11 23:06:26 +00:00
stac
d1dc300081 ahrscomms: remove unused sync and switch_proto messages 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1582 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-11 23:06:25 +00:00
stac
80c92ba54b ahrs: process SPI messages while idle 
This makes the AHRS continually process SPI messages
while waiting for new samples to be ready.  This has
the side effect of making the CPU utilization on the
AHRS pin at 99-100% (ie. we make use of all of our
otherwise idle time).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1581 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-11 23:06:23 +00:00
stac
93ef510946 ahrscomms: use relative delays to avoid slipping 
Change from using vTaskDelay to using vTaskDelayUntil to
ensure that we're trying to stay periodic rather than
just waiting a fixed amount of time after each loop of
processing.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1580 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-11 23:06:22 +00:00
dschin
e6fea9bb76 Changed the feedback gain matrix K to a global variable in insgps so that it may be inspected. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1577 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-10 20:46:46 +00:00
zedamota
aa1af2b9f3 OP-21/Flight Bootloader - Changes to make it independent of RTOS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1570 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-09 18:44:55 +00:00
peabody124
6cdb9b0b48 AHRS: Added Matlab code to analyze the INSGPS friendly data dump format and plot the important variables. This requires "DUMP_FRIENDLY" be enabled in the file. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1560 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-08 06:15:21 +00:00
peabody124
e499f33fd5 AHRS: Improved code to stream raw data from AHRS and added a matlab function to acquire and analyze the data. The QT program to analyze it should work but QextSerial seems to have a bug and drops or inserts data 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1559 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-08 06:15:18 +00:00
peabody124
9895b403c7 Ground/SerialLogging: Improved the serial dump from AHRS to have a big random frame header and to detect it on the logging program. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1556 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-07 16:33:10 +00:00
cwabbott
c2e93aa810 PiOS/win32: Made the process priority "high priority" for OpenPilot.exe to help with accurate timing. Also removed some unneeded debugging code from tasks.c. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1553 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-06 21:23:02 +00:00
peabody124
e06162fa3a Flight/AHRS: Reorganized the code a little to make sure indoor used by default unless GPS updates come 
in.  Also change the velocity variance in indoor mode to lower to make it get a better attitude estimate (primarily faster convergence - probably will tweak this in the future dynamically).  Finally decreased barometer variance - in scope it's actually quite reasonable, normally within +/- .5 m.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1546 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-06 07:54:19 +00:00
peabody124
e260077247 Flight/ManualControl: Making failsafe test (which must explicitly look at receiver inputs instead of throttle values in case of reversal) also consider readonly flag to detect GCS control. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1545 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-06 02:58:41 +00:00
peabody124
61854ac6ab Flight: Support for quadcoptors. The format of this control will change to support octo's and more flexible tuning. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1544 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-06 02:58:39 +00:00
stac
95595664c3 telemetry: fix comments around #ifdef 
No functional changes.

The closing comment on some of the USB_HID related
ifdefs was outdated.  Fixed.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1541 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-05 23:10:34 +00:00
zedamota
492227c916 OP-21/Flight Bootloader - Donwload function is now interrupt driven. Had to increase IN polling interval due to some problems. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1530 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-05 00:17:20 +00:00
peabody124
f9a0b799a2 Foolishly forgot object like I always do 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1529 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 22:01:11 +00:00
peabody124
d3b677298c Flight/ManualControl: Added a hysteresis loop to the manual control connection/disconnection status. I seem to get glitching without it - probably because of the receiver catching noise. It still occasionally glitches but I don't want to make it longer. Probably should be an adjustable setting. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1527 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 17:08:04 +00:00
peabody124
c21d058110 Flight: Added ability to use a third accessory input. Currently using that to select tuning roll/pitch bias and PID tuning. I also _STRONGLY_ recommend if you enable these accessory channels (and thus these features) you make the saved meta data for the StabilizationSettings and AttitudeSettings read-only, so only on flights where you mean to can you change these settings. I'm also not convinced about the interface - it seems like flicking TX switches to get into adjustments is a recipe for disaster. Probably need to just control through GCS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1526 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 17:08:02 +00:00
peabody124
45e8131a30 Flight: Added ability to use additional TX inputs to tune attitude bias. Note this form of the calibration is temporary and will likely be replaced by a rotation matrix to deal with more general rotations. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1525 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 17:07:59 +00:00
peabody124
8dbc382e5b Ground/CoordinateConversions: Shows correct location now. I just typed in a 3.14 constants and forgot to change to M_PI. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1520 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 05:58:43 +00:00
peabody124
b4ff14b725 Ground/GCSControl: Swapped sign conventions of sticks to match the sign convention of roll/pitch/yaw. I.e. now right on the roll causes a + roll, pulling down on the pitch causes + pitch. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1518 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 02:19:06 +00:00
peabody124
404e0c2f44 OP-132 AHRS: Changes to the Indoor flight handling to only use the barometer indoors and update with a zero for velocity and high variance. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1517 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 02:19:04 +00:00
peabody124
a406034ed9 OP-132 Flight/AHRS: Changed the heuristics regarding GPS quality and INSGPS updates. Now if satellites < 7 or PDOP > 3.5 it does not perform GPS updates. Professor is working on some code to fix parts of the covariance matrix. If indoor updates high a 0 position and velocity and high variance. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1515 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 02:19:00 +00:00
zedamota
8233f87b0a OP-21/Flight Bootloader - Download function fixed. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1513 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 01:06:40 +00:00
dschin
84d054c4ed gdb command file to enable debugging with interrupts in Eclipse 
See http://forums.openpilot.org/topic/1671-debugging-with-interrupts-in-eclipse/
for details.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1511 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-03 13:10:04 +00:00
cwabbott
d7a3ffb464 flight/PiOS.win32: update Makefile.win32 with new UAVObjects, also change UAVObject headers to have a newline at the end. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1510 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-02 23:55:24 +00:00
zedamota
749267aee5 OP-21/Flight Bootloader - Minor bug fix. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1508 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-02 22:43:32 +00:00
zedamota
7a66232be0 OP-21/Flight Bootloader - Complete recoding. WARNING- As with all flash memories, the one in your OP HW as limited write cycles. Errors in this bootloader may damage your HW if it falls under a write or erase dead loop. This is still under development, for devs only. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1507 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-02 20:13:41 +00:00