1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
Commit Graph

4057 Commits

Author SHA1 Message Date
Laurent Lalanne
21fcbf024d OP-1354 ETA for home based on current velocity and distance, time conversions/formating 2014-06-20 20:33:43 +02:00
Laurent Lalanne
1921f929f3 OP-1354 Fixed pitch0 line, some centering. Added Home info : distance/bearing to home 2014-06-20 18:26:31 +02:00
Laurent Lalanne
8e2efe0c5f OP-1354 Added compass-home (Enabled if TakeOffLocation.Status is Valid) and compass-waypoint (Currently disabled) 2014-06-20 00:50:44 +02:00
Laurent Lalanne
5dc0cb7d8e OP-1354 Fixes center-arrows position on resize, disable sideslip moving (flicker issue on SmoothedAnimation) 2014-06-19 20:50:47 +02:00
Laurent Lalanne
29d0d31e09 OP-1354 PFD fixes : World size (grey background appears when board is tilted) + Removed empty foreground item (add flickering on render) 2014-06-19 00:49:45 +02:00
Laurent Lalanne
98af0a544f OP-1354 Current_voltage_fixes_and_more_in_PFD : Minor changes to remove some glitches 2014-06-17 19:37:09 +02:00
Laurent Lalanne
529cf301b0 Merge branch 'next' into laurent/OP-1354_Current_voltage_fixes_and_more_in_PFD 2014-06-17 17:17:23 +02:00
Laurent Lalanne
8988e4901b OP-1354 Current_voltage_fixes_and_more_in_PFD : Solid border with round corners, better resizing 2014-06-17 14:29:24 +02:00
Philippe Renon
d775eb536a OP-1351 changed some thermal calibration instruction messages from Warn to Info 2014-06-16 23:06:06 +02:00
Philippe Renon
0f439baff2 OP-1351 six point calibration would not clear instruction text when displaying home location not set error message 2014-06-16 23:05:19 +02:00
Laurent Lalanne
a46a1e09fb OP-1339 System Health fixes : Alignments, text center, text sizes, round corners over layers, red cross. 2014-06-16 22:03:23 +02:00
Alessio Morale
dfdce20044 Merge remote-tracking branch 'origin/Bertrand/OP-1339_System_Health_Improvement' into next 2014-06-16 10:04:55 +02:00
Alessio Morale
3932d0a8bd Merge remote-tracking branch 'origin/laurent/OP-1354_Current_voltage_fixes_and_more_in_PFD' into next 2014-06-16 10:04:07 +02:00
Philippe Renon
bd127320d7 OP-1351 thermal calibration - fixed glitch in time display 2014-06-14 22:24:07 +02:00
Philippe Renon
7eea7113e3 OP-1351 six point calibration - replaced unset home location error popup wiht instruction message 2014-06-14 18:41:53 +02:00
Philippe Renon
440741f616 OP-1351 fixed an instruction message 2014-06-14 18:19:18 +02:00
Philippe Renon
48978b523c OP-1351 minor cleanups 2014-06-14 18:14:10 +02:00
Philippe Renon
6e43858f50 OP-1351 commented out thermal rise simulation 2014-06-14 18:13:17 +02:00
Philippe Renon
51bfb49e8c OP-1351 add more helpful instruction to thermal calibration (end condition, estimated time, ...) 2014-06-14 18:11:43 +02:00
Philippe Renon
1e0028cc2f OP-1531 thermal calibration now displays the acquired temperature range + cleaned up display and handling of temp and variance. 2014-06-13 00:40:55 +02:00
Philippe Renon
bc7087da1a OP-1351 added missing tr() call for thermal calibration estimated time message 2014-06-12 21:11:45 +02:00
Kevin Finisterre
58dad5d3a5 Try to set Ilimit Rate... somehow I set Ilimit Attitude instead. Need to sort out. basic idea worked though. 2014-06-12 12:07:03 -04:00
Kevin Finisterre
9aaa764797 work out a method to set some default PIDs... using a setData() call helps!!! 2014-06-12 11:05:46 -04:00
Kevin Finisterre
1bf9f250dc poor attempt to set some default PIDS? make a note to change the modelview ehre as well. 2014-06-12 02:43:38 -04:00
Kevin Finisterre
2dcc9c59f1 correct values to be more appropriate for VehicleConfigurationHelper::applyMixerConfiguration() 2014-06-11 21:28:20 -04:00
Kevin Finisterre
47673f519e Attempt to set some mixer values 2014-06-11 21:25:05 -04:00
Kevin Finisterre
64b2fce3d4 I created some sort of issue in the Output warning highlights. Disable for now. 2014-06-11 16:02:15 -04:00
Philippe Renon
67ff2e58b8 OP-1351 now use Newton's law of cooling to simulate temperature rise 2014-06-11 21:35:07 +02:00
Kevin Finisterre
569209a510 add setupElevonServo function 2014-06-11 15:20:31 -04:00
Kevin Finisterre
1f74a78263 Attempt adding in the proper Mixer setting constructs for Elevon setup. 2014-06-11 14:41:42 -04:00
Kevin Finisterre
b9733363b3 some revision control data is misplaced preventing compile 2014-06-11 12:23:33 -04:00
Laurent Lalanne
4ecc78a353 OP-1337 Simplified tooltip message for DelayComp/CC inverted mode 2014-06-11 07:56:16 +02:00
Philippe Renon
e596f2ea90 OP-1351 thermal calibration - added Debug message type and used it to stop displaying some status messages 2014-06-11 01:07:00 +02:00
Kevin Finisterre
7558509720 Revert "Fix minor cosmetic issue where vtail model was not rendering in the Configuration screen. Edit the Inkscape Object Properties."
This reverts commit 11fa414e1a.

Conflicts:
	ground/openpilotgcs/src/plugins/config/images/fixedwing-shapes.svg
	ground/openpilotgcs/src/plugins/setupwizard/pages/fixedwingpage.cpp
2014-06-08 00:00:43 -04:00
Kevin Finisterre
28246cccbe fix remaining headers 2014-06-07 23:04:12 -04:00
Kevin Finisterre
0fa69ba789 add proper header definition for Elevon setup 2014-06-07 22:52:28 -04:00
Kevin Finisterre
0bd4e9efa5 Try to fix my Vtail->Elevon naming issue. Attempt to fix Elevon mixer setting defaults 2014-06-07 22:31:42 -04:00
Kevin Finisterre
c2c89bf0f5 Merge remote-tracking branch 'origin/next' into thread/OP-1222_Fixed_Wing_Wizard_Support
Getting more current code in place.
2014-06-07 21:24:05 -04:00
Alessio Morale
2396350f2f OP-1365 Flight code instrumentation API: Implementation of UAVObject wrapper layer 2014-06-06 22:19:27 +02:00
Philippe Renon
4a6c417bda OP-1351 fixed inversed calibration instruction text 2014-06-01 20:50:46 +02:00
Philippe Renon
b348dbdd1c OP-1351 moved calibration help text to its own tab (plenty of room to add more help..) 2014-06-01 19:28:15 +02:00
Philippe Renon
bfff7f73ed OP-1351 made instruction text more consistent accross calibration steps 2014-06-01 17:41:05 +02:00
Philippe Renon
e434fc6db9 OP-1351 display thermal calibration estimated duration in instruction text box 2014-06-01 17:21:03 +02:00
Philippe Renon
b13e5548c1 OP-1351 made sure that progress bar won't show 100% when calibration failed 2014-06-01 17:20:17 +02:00
Philippe Renon
99444babeb OP-1351 simplified thermal progress bar handling and made it indeterminate when target duration not yet estimated 2014-06-01 16:03:31 +02:00
Philippe Renon
e0a61603bf OP-1351 fixed compilation error caused by duplicate method 2014-06-01 15:01:02 +02:00
Philippe Renon
d70c78109f OP-1351 fixed issue with buttons initial enabled state 2014-06-01 14:31:21 +02:00
Philippe Renon
2a1e2436eb OP-1351 added progress bar for sixpoint calibration 2014-06-01 12:49:57 +02:00
Philippe Renon
0b108ecf04 OP-1351 Apply and Save logic for thermal calibration now works as expected 2014-06-01 01:08:21 +02:00
Philippe Renon
149f7e79d9 OP-1351 add acquiring flag to avoid spurious samples at the end of thermal calibration acquisition 2014-05-31 20:15:10 +02:00
Philippe Renon
bdbe9d7f68 OP-1351 fixed early closing of debug log file causing some qt warnings and loss of debug output 2014-05-31 19:44:09 +02:00
Philippe Renon
489f59b65d OP-1351 fixed issue that caused thermal calibration to progress bar to move back 2014-05-31 19:42:53 +02:00
Philippe Renon
5182ccc2eb OP-1351 initial cleanup of thermal calibration + added attempt at simulating the temperature rise 2014-05-31 19:42:40 +02:00
Philippe Renon
14e8e769c8 OP-1351 made help icon size consistent accross configuration panels 2014-05-30 19:06:34 +02:00
Philippe Renon
111dcd704f OP-1351 SixPointCalibrationModel will now only save relevant parts of uavobjects to avoid stomping irrelevant parts 2014-05-30 19:06:34 +02:00
Philippe Renon
ac61ed35d2 OP-1351 use two instances of SixPointCalibrationModel (one for accel and one for mag calibration) to avoid apply/save issues when using only one 2014-05-30 19:06:29 +02:00
Philippe Renon
9f50859978 OP-1351 Apply and Save logic for board level calibration now works as expected 2014-05-30 18:07:23 +02:00
Philippe Renon
20708f0058 OP-1351 Apply and Save logic for sxi point calibration now works as expected 2014-05-30 15:11:37 +02:00
Philippe Renon
934a11bd96 OP-1351 Apply and Save logic for gyro bias calibration now works as expected 2014-05-30 15:09:07 +02:00
Kevin Finisterre
11fa414e1a Fix minor cosmetic issue where vtail model was not rendering in the Configuration screen. Edit the Inkscape Object Properties.
Likewise adjust fixedwingpage.cpp to be more consistant with the inkscape label. ie 'vtail' vs. 'v-tail'
2014-05-29 11:51:20 -04:00
Philippe Renon
bd6bd043d1 OP-1351 thermal calibration - fixed duplicate signal warning 2014-05-29 00:26:37 +02:00
Philippe Renon
9cced08f82 OP-1351 reviewed instructions text for all calibration steps 2014-05-28 23:43:11 +02:00
Philippe Renon
60700cab7f OP-1351 improved instructions handling for thermal calibration (removed duplicates, specified instruction types) 2014-05-28 23:07:31 +02:00
Laurent Lalanne
534a3d2282 OP-1337_French_translations_updates Changes/Updates in uavconfiginfo.cpp (not sure is currently used) 2014-05-28 20:43:38 +02:00
Laurent Lalanne
94150fc2d3 Merge branch 'next' into laurent/OP-1337_French_translations_updates 2014-05-28 20:03:14 +02:00
Laurent Lalanne
e3f426d758 OP-1354 Removed pitch0 line from Pitch-scale, fixed RoolScale position (based on radius) + center of rotation. 2014-05-27 22:16:05 +02:00
Laurent Lalanne
08dce43934 OP-1354 Background color (Consumed energy alarm) only displayed with value is > 0 2014-05-27 00:03:52 +02:00
Laurent Lalanne
f8ce7f0624 OP-1354 Added ConsumedEnergy alarm on Pfd : Color changes based on EstimatedFlightTime : 2mn - Orange / 1min Red 2014-05-26 19:57:33 +02:00
Corvus Corax
bf16738fd3 Merge branch 'next' into amorale/OP-1350_takeoff_location_handling 2014-05-26 17:16:47 +02:00
Laurent Lalanne
6a9f588082 OP-1354 Updates battery values : Fixes blinking pfd 2014-05-26 16:56:18 +02:00
Laurent Lalanne
9dc02fde61 OP-1354 Current voltage fixes and more in PFD
Bottom text position (warning alarms)
2014-05-26 13:55:44 +02:00
Laurent Lalanne
9ec2ef07d6 OP-1354 Current voltage fixes and more in PFD
Fix Rollscale center of rotation
2014-05-26 13:54:09 +02:00
Philippe Renon
c9b64d6399 OP-1351 reverted use of QToolbox + tried to better handle resizing of visual help 2014-05-25 22:48:36 +02:00
Kevin Finisterre
4ebaa6f205 set all the min and max values to 554 and 2400 per the Arduino servo library
fix some cosmetic errors on the debug output
fix the Vtail mixer setting that caused channel 4 to go crazy due to being undefined. Servo would sit and shake for no reason.
2014-05-25 16:05:13 -04:00
Laurent Lalanne
c8f31eb19c OP-1354 Current voltage fixes and more in PFD
Reverted some previous changes (round fonction) : CPU load
Added mask : Gps bar graph, telemetry
Tested V, A, mAh values.
2014-05-25 21:29:24 +02:00
Kevin Finisterre
4d250ff856 Fix channel indexes to use servoCenterSlider
Set channelNeutral = 1500 where appropriate for each model type.
Add the missing actuator save for fixed wing!   actSettings->setData(data);
2014-05-25 15:20:04 -04:00
Philippe Renon
0f72ca05e9 OP-1351 cleaned up instruction handling code (less hacky) 2014-05-25 20:14:26 +02:00
Philippe Renon
48558f75e6 OP-1351 disable other calibration steps when running thermal calibration 2014-05-25 18:46:51 +02:00
Laurent Lalanne
85dd0666f1 OP-1354 Current voltage fixes and more in PFD
Fix : Gps-text and Altitude scale position
2014-05-25 16:35:47 +02:00
Laurent Lalanne
893257d08b OP-1354 Current voltage fixes and more in PFD
Fixes on object position, Warning cross with rounded tips.
2014-05-25 16:16:42 +02:00
Laurent Lalanne
95e01586db OP-1354 Current voltage fixes and more in PFD
Fix sizes on svg file
Sideslip working if needed.
2014-05-25 15:03:53 +02:00
Laurent Lalanne
33bf47bc44 OP-1354 Current voltage fixes and more in PFD
Better rendering, still problems on top (Gps bars, borders)
2014-05-25 12:17:37 +02:00
Laurent Lalanne
8bc4b5e7f3 OP-1354 Current voltage fixes and more in PFD
First commit

Fix Current, Voltage and ConsumedEnergy on Pfd (i hope)
Added Throttle bargraph and Telemetry Tx/Rx + Telemetry status
Top panel with more space for future information / Compass moved
2014-05-25 05:46:06 +02:00
Philippe Renon
9a1a43186a OP-1351 attempt at using a QToolbox for the calibration steps UI (wip to get early feedback) 2014-05-23 09:15:24 +02:00
Philippe Renon
297671ae68 OP-1351 temperature (absolute and variance) are displayed again. cleaned up related code. 2014-05-22 21:22:54 +02:00
Philippe Renon
4feaa72998 OP-1351 thermal calibration step now uses instruction panel like all other steps (WIP).
Display of temp and temp variation currently broken.
2014-05-21 23:14:09 +02:00
Philippe Renon
e8b7a025ba OP-1351 calibration ui : Moved instruction panel below button panel to free
space for visual help. Made visual help image respect aspect ration. Text
panels are now non editable, reworked help text and step names.
2014-05-21 23:14:08 +02:00
Philippe Renon
eee02bafe6 first version (resizing should go to image, might need a split pane) 2014-05-21 23:14:08 +02:00
Alessio Morale
4581481852 Fix a bug making version checker not working for satellite. 2014-05-20 15:13:39 +02:00
Corvus Corax
718a35c376 OP-1353 Fix Position and Velocity in Flightgear HITL bridge 2014-05-19 00:18:57 +02:00
Laurent Lalanne
3f9507d109 OP-1337 French translations updates
Minors updates
2014-05-17 11:49:50 +02:00
Laurent Lalanne
2f3cca7478 Merge remote-tracking branch 'origin/next' into laurent/OP-1337_French_translations_updates 2014-05-17 10:50:47 +02:00
Philippe Renon
fe60509ffa OP-1331 uncrustified 2014-05-16 23:53:04 +02:00
Philippe Renon
846146ca80 Merge branch 'filnet/OP-1331_alignment_issue_in_input_output_channel_config' into next
Conflicts:
	ground/openpilotgcs/src/plugins/config/configgadgetwidget.cpp
2014-05-16 23:51:13 +02:00
Alessio Morale
37d2ace282 OP-1350 add uavo to GCS 2014-05-16 02:16:45 +02:00
Philippe Renon
9fe0c6516c OP-1331 slightly increased min width of Input Channel Function combobox 2014-05-15 00:20:45 +02:00
Philippe Renon
ced787d716 OP-1331 fixed regression in widget binding framework (handling of scale was broken) 2014-05-14 23:37:40 +02:00
Philippe Renon
b74e1c19bf OP-1331 slightly increased min width of Input Channel Type and Number comboboxes 2014-05-14 22:11:15 +02:00
Philippe Renon
c32026b906 OP-1331 hopefully last tweaks for input/output channel alignment on CliffOS (most component width are now self adjusting) 2014-05-13 22:52:10 +02:00
Philippe Renon
940074e6f6 OP-1348 Congig gadget would briefly flash next widget when replacing the currently selected widget (missing change) 2014-05-13 22:06:10 +02:00
Philippe Renon
513ba37746 OP-1348 Congig gadget would briefly flash next widget when replacing the currently selected widget 2014-05-13 22:04:01 +02:00
Laurent Lalanne
5ea6db1e93 OP-1337 French translations updates
FlightLog updates
2014-05-13 17:56:28 +02:00
Philippe Renon
e9f14544f9 OP-1346 GCS was not allowing setting the ResponseTime for the Collective input channel.
Worse GCS would then shift the values (Accessory0 would go to Collective, Accessory1 to Accessory0,
Accessory2 to Accessory1 and Accessory2 would always be zero)
2014-05-12 22:42:01 +02:00
Philippe Renon
6804e5fe8e OP-1331 factored common code between InputChannelForm and OutputChannelForm into new abstract class ChannelForm 2014-05-12 22:30:50 +02:00
Laurent Lalanne
7aa221e7ca OP-1337 French translations updates
Update for help link related to Oplink (source code and translation)
Previously old wiki Pixtreme page
2014-05-12 19:57:39 +02:00
Laurent Lalanne
06ac0100c7 OP-1337 French translations updates
Cleanup : Removed obsoletes translations + minor fixes
2014-05-12 12:07:39 +02:00
Laurent Lalanne
fb58c001cf OP-1337 French translations updates
SystemHealt alarms : Little update and changes on Receiver-Critical to match recent changes in next (six stabilization modes)
2014-05-11 23:14:43 +02:00
Philippe Renon
38b0617596 OP-1331 uncrustified 2014-05-11 22:08:35 +02:00
Philippe Renon
7affc8d12f OP-1331 OP-1335 BITFIELD was removed by mistake from UAVObjectField::isNumeric() (self review) 2014-05-11 18:53:49 +02:00
Philippe Renon
88100a72c2 OP-1331 OP-1335 revisited GComboBox to integer binding (less hacky now ;) ) 2014-05-11 18:48:39 +02:00
Philippe Renon
9cf24a9731 OP-1331 minor tweaks to output channel form 2014-05-11 17:46:37 +02:00
Philippe Renon
b6a297c40f OP-1159 Removed "Rev" checkboxes on input tab for channels on which it doesn't have an effect 2014-05-11 17:42:44 +02:00
Philippe Renon
048ca0787f OP-1343 GCS Config - Input Channel Response Time was not saved + Made visible only for relevant channels. 2014-05-11 17:32:04 +02:00
Philippe Renon
fcc16367eb OP-1331 fixed compilation error in configgadgetwidet introduced with last commit 2014-05-11 16:30:31 +02:00
Philippe Renon
9012f0aa89 OP-1331 commented out useless GCS logging 2014-05-11 16:20:07 +02:00
Philippe Renon
3a02149d1d Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next 2014-05-11 14:56:56 +02:00
Philippe Renon
40ed1fc570 OP-1174 fixed GCS telemetry build dependency issue 2014-05-11 14:20:31 +02:00
Bertrand Oresve
fe9cfa77b4 OP-1339 System Health Improvement 2014-05-11 10:05:47 +02:00
Philippe Renon
274c6aadad OP-1331 trying new approach to address input/output channel configuration grid alignment issues.
New approach is to move the individual widgets to the parent grid layout in order to have them all under the same constraints.
This wip to have feedback on other OSes.
2014-05-10 20:40:14 +02:00
Laurent Lalanne
b30b1ad395 OP-1337 French translations updates
Dot missing, added in source code and translation updated.
2014-05-10 13:48:12 +02:00
Laurent Lalanne
0df5266406 OP-1337 French translations updates
Little changes
2014-05-10 13:19:56 +02:00
Laurent Lalanne
4f31ce6b01 OP-1337 French translations updates
Updated wiki links in translation
2014-05-10 12:21:31 +02:00
Laurent Lalanne
048ac1e383 OP-1337 French translations updates
Add tr() for Wiki links and allow FR pages from wiki
2014-05-10 11:56:24 +02:00
Laurent Lalanne
fd8f475b7c OP-1337 French translations updates
Cruize control tooltips, Firmware Uploader updates
2014-05-10 01:15:42 +02:00
Laurent Lalanne
7fafb44bfb OP-1337 French translations updates
Typo fix in importexportgadgetwidget.cpp : to file...
2014-05-09 22:44:26 +02:00
Laurent Lalanne
77a11a04fc OP-1337 French_translations_updates
First update
2014-05-09 21:00:40 +02:00
Bertrand Oresve
fd1b786868 Merge branch 'next'
Conflicts:
	flight/libraries/sanitycheck.c
	flight/modules/Stabilization/stabilization.c
2014-05-08 21:36:54 +02:00
Corvus Corax
29cef5876d Merge branch 'amorale/OP-975_calibration_process_changes' into corvuscorax/OP-1161_magnetometer-alarm
Conflicts:
	ground/openpilotgcs/src/plugins/config/calibration/sixpointcalibrationmodel.cpp
2014-05-08 21:27:01 +02:00
Corvus Corax
ce8e9db362 Merge branch 'next' into corvuscorax/OP-1161_magnetometer-alarm 2014-05-08 21:16:21 +02:00
Philippe Renon
da3d9d61fc OP-1331 fixed alignment issues in Config Output channel list (mostly by fixing the size of items).
Includes other minor UI cleanups (spin box text right aligned, ...)
2014-05-08 18:31:09 +02:00
Philippe Renon
fed7fba84f OP-1331 fixed alignment issues in Config Input channel list (mostly by fixing the size of items).
Removed hidden channelNumber spin box. Included other minor UI cleanups (spin box text right aligned, ...).
2014-05-08 18:31:01 +02:00
Philippe Renon
07a828f971 OP-1331 OP-1335 Added support in ConfigTaskWidget to bind a GComboBox to an integer property 2014-05-08 17:55:20 +02:00
Philippe Renon
cc1c4db786 Merge branch 'filnet/OP-1174_beautify_uploader_gadget_popups' into next 2014-05-08 00:28:26 +02:00
Alessio Morale
96904bdf50 OP-975 Use GyroSensor UAVO when available for gyro calibration (on revo GyroState is biased by EKF gyrobias, so it reads almost always 0) 2014-05-07 22:34:27 +02:00
Corvus Corax
2da1f2aa09 Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1161_magnetometer-alarm 2014-05-07 22:26:20 +02:00
Alessio Morale
bd7b1f8d57 OP-975 some visual enhancemets to UI (moving save button for level, adding spacers, showing percentage to progressbar) 2014-05-07 21:07:08 +02:00
Alessio Morale
7451e3d0a5 OP-975 fix some help text. 2014-05-07 21:03:08 +02:00
Cliff Geerdes
ead576bab4 OP-1323 GCS label font tweaks 2014-05-06 21:52:32 -04:00
Corvus Corax
56b5747b4e uncrustify 2014-05-06 18:53:57 +02:00
Corvus Corax
a2ae0601bb Merge remote-tracking branch 'origin/amorale/OP-975_calibration_process_changes' into corvuscorax/OP-1161_magnetometer-alarm 2014-05-06 18:51:46 +02:00
Corvus Corax
2bd7609de9 Merge branch 'next' into corvuscorax/OP-1161_magnetometer-alarm
Conflicts:
	ground/openpilotgcs/share/openpilotgcs/diagrams/default/system-health.svg
2014-05-06 17:30:00 +02:00
Corvus Corax
b42cd8e862 Merge remote-tracking branch 'origin/Bertrand/OP-1303_Add_PathPlan_Alarm_In_SystemHealth' into next 2014-05-06 16:58:17 +02:00
Philippe Renon
e3e92efc70 OP-1174 uncrustified 2014-05-05 00:05:51 +02:00
Philippe Renon
1e803c292b OP-1174 beautified various uploader popups 2014-05-04 22:53:14 +02:00
Philippe Renon
f38de84aa2 OP-1174 changed title of firmware mismatch popup 2014-05-04 22:52:09 +02:00
Philippe Renon
bcb16f7618 OP-1174 minor uploader ui tweaks : Status text now has minimum size to avoid jumps of the toolbar buttons. Capitalized Erase Settings button. 2014-05-04 22:51:24 +02:00
Philippe Renon
465f57215c OP-1309 restored tab index to 0 in input.ui 2014-05-04 18:22:28 +02:00
Philippe Renon
8abd540eb9 OP-1309 fixed label alignment issue in input.ui affecting Stabilization Modes 2014-05-04 12:47:40 +02:00
Corvus Corax
aee6a3b85b Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1259_Cruise_Control_Tweaks 2014-05-04 12:04:43 +02:00
Corvus Corax
fb41258e57 OP-1309 fixed missing assignment in manualcontrol FM switch 2014-05-04 12:03:56 +02:00
Alessio Morale
1395bd524c OP-975 fix help, make instruction text more visible 2014-05-03 19:45:22 +02:00
Corvus Corax
8ec8c4e235 Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1259_Cruise_Control_Tweaks 2014-05-03 18:40:10 +02:00
Alessio Morale
c15b415499 OP-975 have differenet set of messages for accel only(ignore orientation on xy plane) and mag calibration. 2014-05-03 18:40:04 +02:00
Corvus Corax
0509595137 OP-1309 present for Laurent: 3 more Stabilized modes (and a bit of cleanup) 2014-05-03 18:38:45 +02:00
Philippe Renon
1bca36ab8d OP-1174 auto update wizard : removed now (hopefully) uneeded workarounds 2014-05-03 17:42:19 +02:00
Philippe Renon
5b64459eb3 OP-1174 changed fw version check popup from QErrorMessage to QMessageBox. This allows to use a warning icon, etc... And opens the door to more improvments. 2014-05-03 17:41:01 +02:00
Philippe Renon
8c0560418d OP-1174 moved firmware version check (again) from uploader plugin to telemetry plugin 2014-05-03 14:32:46 +02:00
Philippe Renon
6fe1c9acd2 OP-1174 OP-1285 Fixed uploader gadget button tooltip. Was wrongly indicating that the erase feature is available from BL version 4 and earlier instead of later. 2014-05-02 23:46:30 +02:00
Philippe Renon
81b7063f04 OP-1174 OP-1131 moved firmware version check from uploader gadget to uploader plugin - removed test code 2014-05-02 23:42:28 +02:00
Philippe Renon
40dcd94b5c OP-1174 OP-1131 moved firmware version check from uploader gadget to uploader plugin.
This ensures that the check is always done even if the uploader gadget is not displayed.
2014-05-02 23:36:05 +02:00
Corvus Corax
c63540b2ec Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1259_Cruise_Control_Tweaks
Conflicts:
	flight/modules/Stabilization/stabilization.c
	shared/uavobjectdefinition/stabilizationsettings.xml
2014-05-02 18:25:57 +02:00
Philippe Renon
4b379a1816 OP-1174 unrelated cleanup :) 2014-05-02 08:56:09 +02:00
Philippe Renon
f4f3f74948 OP-1174 uploader gadget - now wait for all boards to be disconnected (used to wait for *one* board to be disconnected).
This was acheived by reusing new ConnectionWaiter.
2014-05-02 08:55:46 +02:00
Philippe Renon
9573e141aa OP-1174 auto update wizard - error messages are now shown in red 2014-05-02 08:53:40 +02:00
Philippe Renon
6dd88da492 OP-1174 uploader gadget - made all strings translatable 2014-05-01 23:48:17 +02:00
Philippe Renon
9132e3d44f OP-1174 uploader gadget - removed deprecated code and minor renaming 2014-05-01 23:21:57 +02:00
Philippe Renon
fababeeeee OP-1174 wizard upgrade page - made all strings translatable 2014-05-01 23:19:50 +02:00
Philippe Renon
7fef044325 OP-1174 wizard upgrade page - removed now uneeded fix that caused the wizard dialog to flicker 2014-05-01 23:14:35 +02:00
Corvus Corax
f7a2e31809 Merge branch 'next' into theothercliff/OP-1259_Cruise_Control_Tweaks
Conflicts:
	flight/pios/stm32f10x/inc/usb_conf.h
2014-05-01 22:58:10 +02:00
Philippe Renon
e8cb96f90d OP-1174 uploader gadget - removed popup to disconnect when using auto update.
Fix also applies to vehicule setup wizard autoupdate page
Instead of using a popup that requires user to click Ok, GCS will wait untill all boards are disconnected
This fix induces lots of cleanups.
2014-05-01 22:48:22 +02:00
Corvus Corax
e47cad8ab8 OP-1309 changed default maximum rate for yaw (was too low, old Stabi ignored that setting) 2014-05-01 19:33:03 +02:00
Philippe Renon
39205e350f OP-1174 uploader gadget - added comments and cleaned up logging 2014-05-01 17:19:33 +02:00
Philippe Renon
c981da5f09 OP-1174 uploader gadget - make sure UI is updated before modal popup is executed 2014-05-01 17:19:24 +02:00
Philippe Renon
3ebe4a7c77 OP-1174 uploader gadget - refactored duplicated code into new "sleep" method 2014-05-01 17:19:23 +02:00
Philippe Renon
b13b72acad OP-1174 uploader gadget - fixed spelling mistake and simplfied erase button logic 2014-05-01 17:18:58 +02:00
Philippe Renon
ef9eaaba35 OP-1174 added timing out dialog used for board disconnect and connect detection (no need to click ok anymore when disconnecting while rescuing) 2014-05-01 16:37:12 +02:00
Bertrand Oresve
5c1435bef1 OP-1161 Add Mag alarm in System-Health 2014-05-01 12:45:34 +02:00
Corvus Corax
6993570cc9 OP-1309 integrated AltitudeHold into new Stabilization 2014-05-01 11:48:38 +02:00
Corvus Corax
3ada1da71a uncrustify 2014-04-30 22:20:07 +02:00
Bertrand Oresve
e37acae75f OP-1303 Modify INPUT & OUTPUT label 2014-04-30 20:54:25 +02:00
Bertrand Oresve
0a5811fcf9 OP-1303 Change the receiver and actuator boxes 2014-04-30 13:52:37 +02:00
Cliff Geerdes
5ee2930181 OP-1259 Removed inverted flight pitch and yaw reverse option 2014-04-29 20:24:49 -04:00
Bertrand Oresve
567b86167f OP-1303 Corrects the red-cross (bis) 2014-04-29 21:25:23 +02:00
Alessio Morale
cd27914a56 OP-975 Use Fitting algorithm for mag calibration, continously acquiring sample during the whole process 2014-04-27 18:35:30 +02:00
Alessio Morale
b7e53f782b OP-975 Implement fitting along axis (no rotation) 2014-04-27 18:25:04 +02:00
Alessio Morale
a00b633972 OP-975 fix some text, make it translatable 2014-04-27 12:59:39 +02:00
Alessio Morale
bb35a8fc97 OP-975 remove "magic strings", cleanup 2014-04-27 12:58:59 +02:00
Alessio Morale
76b19f8c35 OP-975 Employ a new sequence that is optimal for magnetometer calibration. Updated all images 2014-04-27 12:13:49 +02:00
Corvus Corax
33acbc4209 OP-1309 added new thrust mode default to setup wizard 2014-04-26 20:57:39 +02:00
Corvus Corax
599661ba18 OP-1309 UAVObject changes, GCS changes and Makefile changes needed for Stabi refactoring 2014-04-26 15:14:40 +02:00
Bertrand Oresve
aea3ea0f00 OP-1303 correct Airspeed-Error alarm 2014-04-25 10:06:05 +02:00
Bertrand Oresve
30fb96c39f OP-1303 Add PathPlan and SystemConfig Alarm (with correct red cross and labels in capital) 2014-04-23 15:49:17 +02:00
Alessio Morale
7e6875bf3b OP-975 give to empty image a meaningful name 2014-04-22 17:39:12 +02:00
Alessio Morale
7be6c16a40 OP-1301 allow GPS protocol selection only if GPS module is enabled.
This allow to be able to save HW settings with GPS module disabled.
2014-04-20 13:26:06 +02:00
Alessio Morale
d9b25db36d OP-1196 Populate attitude tab at connection for CC 2014-04-20 13:08:07 +02:00
Alessio Morale
d0a3303018 OP-975 replace empty model image. 2014-04-18 14:43:50 +02:00
Bertrand Oresve
bb0097cb76 OP-1303 Add PathPlan Alarm & SystemConfigAlarm, interface refurbishment 2014-04-17 12:38:53 +02:00
Alessio Morale
000ba5e8f3 Merge remote-tracking branch 'origin/laurent/OP-1172_fonts_in_default_config_files' into next
Conflicts:
	ground/openpilotgcs/share/openpilotgcs/default_configurations/Developer.xml
	ground/openpilotgcs/share/openpilotgcs/default_configurations/OpenPilotGCS_wide.xml
2014-04-15 22:42:18 +02:00
Bertrand Oresve
2fa8bc031a First try 2014-04-13 22:24:57 +02:00
Alessio Morale
e165324019 OP-975 Add some graphic/text hints to gyrocalibration 2014-04-13 19:26:07 +02:00
Alessio Morale
49fae24ea0 OP-975 optimize visual quality for instruction pictures 2014-04-11 20:45:45 +02:00
Alessio Morale
da9aacf94f OP-975 show board images for Accelerometer calibration. 2014-04-11 20:44:16 +02:00
Alessio Morale
9fb0f980f3 OP-975 replace plane pictures and add bare board images 2014-04-11 20:42:42 +02:00
Alessio Morale
37cec18e50 OP-975 move listMean and listVar out of configtaskwidget 2014-04-11 06:29:56 +02:00
Alessio Morale
24af67d91a OP-975 cleanup 2014-04-11 05:44:47 +02:00
Alessio Morale
9aef8b0edf OP-975 Move gyro zero bias calibration to a reusable class 2014-04-11 05:41:39 +02:00
Alessio Morale
2249510c52 OP-975 Move board level calibration to a reusable class 2014-04-11 01:45:36 +02:00
Alessio Morale
7708cdd15d OP-975 Move six points calibration to a reusable class 2014-04-11 00:46:44 +02:00
Alessio Morale
73169e0f20 OP-975 Split level/gyro calibrations, base level calibration on board rotation, a lot more refactoring/cleanup 2014-04-10 22:43:47 +02:00
Alessio Morale
f1d6b3a863 OP-975 fix message at end of calibration 2014-04-10 22:42:20 +02:00
Alessio Morale
28361488b8 OP-975 first part of code refactoring, changed the UI to better use the available space 2014-04-10 17:30:33 +02:00
Alessio Morale
1fe591d51e OP-975 change BoardRotation data type to float so it can be used for level calibration 2014-04-10 01:47:37 +02:00
Alessio Morale
1f0885dd4f OP-975 Calibrating a single sensor doesn't mean reset the other... 2014-04-09 19:57:23 +02:00
Alessio Morale
6c0851769e OP-975 Get rid of SIX_POINT_CAL_ACCEL, implemented
separate cal for mag and accel
2014-04-09 17:35:30 +02:00
Alessio Morale
9e702a123a OP-975 add an "help view" and associated graphics for leveling 2014-04-09 02:23:50 +02:00
Alessio Morale
feee6f78e3 OP-975 Add separate buttons for mag and accel calibration (UI changes) 2014-04-09 02:22:48 +02:00
Alessio Morale
d13d3da204 OP-975 die, die my paperplane 2014-04-09 01:15:08 +02:00
Alessio Morale
45915e3387 OP-975 Remove noise calibration 2014-04-09 01:12:31 +02:00
Alessio Morale
694cb01ace OP-975/OP-1068 Fix gcs so current calibration does still works 2014-04-08 21:22:40 +02:00
Corvus Corax
4b50708db6 uncrustify 2014-04-08 16:26:55 +02:00
Alessio Morale
c83284b21e Merge remote-tracking branch 'origin/next' into shared/OP-1252_update_to_qt521 2014-04-08 11:31:23 +02:00
Alessio Morale
6e0f478f43 OP-1291 fix Matlab/Octave converter after UAVTalk changes.
Also made several optimization.
2014-04-05 13:00:55 +02:00
Alessio Morale
8bb1d0148c Uncrustify 2014-04-01 22:58:23 +02:00
Alessio Morale
b58dd938d2 Merge remote-tracking branch 'origin/andrecillo/OP-1283_SystemHealthGadgetWidget_updateAlarms_coordinate_calculation_correction' into next 2014-04-01 22:11:32 +02:00
Alessio Morale
6540c69698 Merge remote-tracking branch 'origin/andrecillo/OP-1273_PixHawk_airspeed_sensor_MS4525DO' into next 2014-04-01 22:05:12 +02:00
Alessio Morale
840e4727fd Merge remote-tracking branch 'origin/Bertrand/OP-1250_Add_GPS_Protocol_Config' into next 2014-04-01 21:45:11 +02:00
Alessio Morale
8fb8c8c9ff Merge branch 'next' of git://git.openpilot.org/OpenPilot into next 2014-04-01 21:42:34 +02:00
Alessio Morale
0b66e2e96c Merge remote-tracking branch 'origin/laurent/OP-1257_No_GCS_Audio_Linux' into next 2014-04-01 21:36:39 +02:00
Alessio Morale
18be34db05 Merge remote-tracking branch 'origin/filnet/OP-1246_RadioComBridge_bugs' into next 2014-04-01 21:31:32 +02:00
Fredrik Arvidsson
da5d5aa977 Fixed dll export related issue in uavobjectutil/uavobjecthelper.h, this bug only affected windows. 2014-04-01 17:07:03 +02:00
m_thread
93ce3a1e54 Merge branch 'next' into thread/OP-1245_FlightLog_Configuration_And_Control_GUI 2014-03-30 18:36:53 +02:00
Corvus Corax
057563dfb2 OP-1170 re-activated accidently commented out code from commit a79efd7 2014-03-30 17:47:31 +02:00
Andres
fd27a23225 OP-1283 Matrix inversion outside loop, mapRect called once 2014-03-28 18:16:03 +01:00
Andres
c8c9411fca OP-1283 spelling error in comment corrected 2014-03-28 14:43:39 +01:00
m_thread
c91bb83f00 Merge branch 'next' into thread/OP-1245_FlightLog_Configuration_And_Control_GUI 2014-03-28 14:37:58 +01:00
m_thread
6cb2797c4f OP-1245 Made the dialog raise to front if hidden by main window. 2014-03-28 14:34:33 +01:00
Andres
f73d75704b OP-1283 corrected the coordinate calculation of alarm items by including a multiplication of the inverse of the background matrix and the alarm item matrix 2014-03-28 14:22:21 +01:00
Andres
7ec855af5f OP-1273 added and implemented Airpeed alarm for the PixHawk sensor 2014-03-28 14:18:14 +01:00
Cliff Geerdes
45fa3220a5 Merge branch 'next' into theothercliff/OP-1259_Cruise_Control_Tweaks 2014-03-26 13:49:17 -04:00
Cliff Geerdes
81f31e64a9 OP-1259 WIP to merge next in locally 2014-03-26 13:48:24 -04:00
Cliff Geerdes
eaa58fd1dc Merge branch 'theothercliff/OP-1260_Rattitude_Tweaks' into next 2014-03-26 12:22:17 -04:00
Cliff Geerdes
5ecea4bf33 OP-1260 fix misspelling of RattitudeModeTransition 2014-03-23 13:00:00 -04:00
Philippe Renon
2d52720a87 OP-1263 fixed minor memory leak introduced during SDL refactoring 2014-03-23 16:53:17 +01:00
m_thread
629bf807b5 Merge branch 'next' into thread/OP-1245_FlightLog_Configuration_And_Control_GUI 2014-03-23 10:52:15 +01:00
Corvus Corax
1babe4383a Merge remote-tracking branch 'origin/D-Lite/OP-1261-winHIDfix' into next 2014-03-22 21:34:53 +01:00
Cliff Geerdes
6d7d10caba OP-1259 PowerDelayComp addtl inverted modes 2014-03-22 01:18:06 -04:00
m_thread
3e3309860a Merge branch 'next' into thread/OP-1245_FlightLog_Configuration_And_Control_GUI 2014-03-20 23:00:46 +01:00
m_thread
f95e6833e3 OP-1245 Uncrustify 2014-03-20 22:59:27 +01:00
m_thread
77f9294548 OP-1245 Changed the code that saves the logging metadata for all objects and DebugLogSettings object. 2014-03-20 22:58:09 +01:00
m_thread
786d3c97a1 OP-1245 Added tooltips. Added correct colors. 2014-03-20 22:57:21 +01:00
m_thread
b508c7dc96 OP-1245 Re-factored saving to board. Added code to save more things. 2014-03-20 17:02:44 +01:00
m_thread
838d8dd15f OP-1245 Added code to update and store meta data on the board. 2014-03-20 14:10:16 +01:00
m_thread
cfff73361b Merge branch 'next' into thread/OP-1245_FlightLog_Configuration_And_Control_GUI 2014-03-20 07:25:20 +01:00
Philippe Renon
7a6fcba12a OP-1194 uncrustified 2014-03-20 01:46:38 +01:00
Philippe Renon
03bdd5e03e Merge remote-tracking branch 'origin/next' into filnet/OP-1194_persist_scope_gadget_plot_and_legend_visibility_state 2014-03-20 01:42:26 +01:00
Philippe Renon
3594e70437 Merge remote-tracking branch 'origin/next' into filnet/OP-1243_opmap_widget_duplicate_popup_menu_entries 2014-03-20 01:28:47 +01:00
Philippe Renon
82bcc65d4c OP-1263 cleaned up gcscontrol.pro 2014-03-20 01:09:25 +01:00
Philippe Renon
40f648eab1 OP-1255 Windows toolchain : upgraded Qt from version 5.1.1 to version 5.2.1
- Qt installer is now downloaded from official web site
- Qt is not anymore tweaked to contain the SDL SDK (see OP-1263)
- Installing Qt now requires 7-Zip to be available (run "./make/scripts/win_sdk_install.sh [<OpenPilot tools dir>]" to get it)
- SLD needs to be installed with "make sdl_sdk_install"
KNOWN ISSUE : GCS build fails unless V=1 command line arg is provided
2014-03-20 00:46:05 +01:00
Philippe Renon
a9ff7f7afc OP-1255 Qt 5.2.1 : use _MAX_PATH from stdlib.h in place of MAX_PATH from usbstorioctl.h 2014-03-19 23:38:46 +01:00
Philippe Renon
9e9673cde4 OP-1263 moved SDLGamepad members to new private class SDLGamepadPrivate so as to not expose SDL.h to users of this lib 2014-03-19 23:38:37 +01:00
m_thread
a327d49049 OP-1245 Added code to read current log settings from uavos. 2014-03-19 17:08:33 +01:00
Cliff Geerdes
1cb9d9548f OP-1160 limit values in flight code (not just GCS) to avoid DZ. Set GCS tab index back to 0. 2014-03-17 22:40:19 -04:00
Philippe Renon
2903fb9ea7 OP-1263 cleaned up gcscontrol.pro 2014-03-17 20:44:00 +01:00
Philippe Renon
2ee3780d08 OP-1263 SDL is now downloaded and installed independently and is not added to Qt anymore 2014-03-17 20:43:38 +01:00
m_thread
1dae98a378 OP-1245 Added code to load settings from xml file. 2014-03-15 13:57:28 +01:00
Werner Backes
ef715ecd73 Make WriteFile use Events to signal when write requests are
finished. This avoids lockups on Windows platforms during hid_write. (see OP-1261)
2014-03-14 12:19:02 +01:00
Cliff Geerdes
297b0d01cb OP-1260 remove anti-windup, 2 PIDs, mode transition 2014-03-14 01:47:37 -04:00
Bertrand Oresve
bee59c58d3 OP-1250 Add GPS protocol configuration (with minor corrections) 2014-03-13 21:24:31 +01:00
Bertrand Oresve
9622358149 OP-1250 Add Gps Protocol configuration 2014-03-12 20:51:19 +01:00
Laurent Lalanne
03df524e83 OP-1257 No GCS Audio (Linux package) added mediaservice/libgstaudiodecoder.so 2014-03-09 23:31:08 +01:00
Laurent Lalanne
44905fc0a9 OP-1257 No GCS Audio (Linux package) QT5 dependencies : libqgsttools_p.so.1 2014-03-09 21:33:50 +01:00
Laurent Lalanne
2f097ab20b OP-1257 No GCS Audio (Linux package) Only one library is needed (mediaservice/libgstmediaplayer.so) 2014-03-09 19:18:09 +01:00
Alessio Morale
8218becdac uncrustify 2014-03-09 16:43:31 +01:00
Alessio Morale
0f2d65a8e4 Merge branch 'amorale/OP-974_make_bl_info_available_to_fw' into next 2014-03-09 16:17:34 +01:00
Alessio Morale
597a6b4670 Merge branch 'amorale/OP-1230_autoload_dev_firmware' into next 2014-03-09 16:15:09 +01:00
Alessio Morale
b98fce7980 OP-1230 fix paths for Windows as suggested by Filnet 2014-03-09 15:07:11 +01:00
Alessio Morale
4d3b513378 Fix Wiki link for Revo Sensor configuration page Help 2014-03-09 14:46:29 +01:00
Alessio Morale
e407eb8126 Merge branch 'next' of git://git.openpilot.org/OpenPilot into next 2014-03-09 14:38:17 +01:00
Alessio Morale
0b30b79c98 Merge remote-tracking branch 'origin/amorale/OP-1149_gyro_accel_thermal_calibration' into next
Conflicts:
	ground/openpilotgcs/src/libs/eigen/Eigen/src/Core/util/Memory.h
	ground/openpilotgcs/src/plugins/config/revosensors.ui
	ground/openpilotgcs/src/plugins/setupwizard/vehicleconfigurationhelper.cpp
2014-03-09 14:38:08 +01:00
m_thread
41865d5e78 OP-1245 Added functionality to save settings as xml file. 2014-03-09 13:15:17 +01:00
m_thread
171abbb111 OP-1245 Cleaned up after a bad merge. 2014-03-09 10:53:28 +01:00
m_thread
bd90dcc9e9 Merge remote-tracking branch 'origin/next' into thread/OP-1245_FlightLog_Configuration_And_Control_GUI
Conflicts:
	ground/openpilotgcs/src/plugins/flightlog/flightlogmanager.h
2014-03-09 10:47:18 +01:00
m_thread
4db48b7a5e OP-1245 Uncrustify 2014-03-09 10:41:21 +01:00
Laurent Lalanne
2355b12bda Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next 2014-03-09 10:13:05 +01:00
Laurent Lalanne
7662cd75d2 OP-1257 No GCS Audio (Linux package) Libraries needed to play sound. 2014-03-09 10:06:47 +01:00
Corvus Corax
e31dcd7950 Merge branch 'next' into corvuscorax/OP-1216_flight-control-refurbishment 2014-03-09 01:40:40 +01:00
Corvus Corax
5ce46ed7dd uncrustificationization 2014-03-09 01:39:30 +01:00
Corvus Corax
148b453aad OP-1216 added new mixer output type "reversable motor" to have engines which can can backwards go to a safe level when disarmed 2014-03-09 01:37:22 +01:00
m_thread
d25eb01583 OP-1245 Added separate spinbox for period when throttled or periodically is chosen.
Added empty placeholder methods for some functions.
2014-03-08 17:28:46 +01:00
Corvus Corax
82a196b8cf Merge branch 'next' into corvuscorax/OP-1216_flight-control-refurbishment 2014-03-08 15:52:45 +01:00
Alessio Morale
72e674bc09 OP-1254 Update linux copydata 2014-03-08 14:20:14 +01:00
m_thread
cbe4eea01e OP-1245 Added buttons and combobox to the logging settings panel. 2014-03-08 13:47:41 +01:00
m_thread
4f6d680810 OP-1245 Added check for board connected to enable disable controls. This function is only available for Revolution board at this point. 2014-03-08 12:14:19 +01:00
m_thread
4209f1d6b5 Merge remote-tracking branch 'origin/next' into thread/OP-1245_FlightLog_Configuration_And_Control_GUI
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2014-03-08 10:50:32 +01:00
Laurent Lalanne
ab183100d6 OP-1237 Blank/Black Buttons on Vehicle Configuration Multirotor Throttle Curve
Removed stylesheet for MixerCurve in multirotor tab
2014-03-07 22:44:06 +01:00
Fredrik Arvidsson
54036ee5d6 Merge remote-tracking branch 'origin/thread/OP-1170_Compiler_Warnings' into next 2014-03-07 20:20:48 +01:00
m_thread
fe36fbf927 OP-1245 Added debuglog settings combo editor and databinding between C++ and qml. 2014-03-07 18:06:50 +01:00
m_thread
e533215786 OP-1245 Added debuglog settings wrapper and GUI. 2014-03-06 23:30:55 +01:00
m_thread
0c61fd35c8 OP-1245 Added table with UAVOs. Re-factored some UAVObject code. 2014-03-06 00:41:48 +01:00
m_thread
aa9e18d7fa OP-1170 One more compiler warning zapped. 2014-03-04 23:51:44 +01:00
m_thread
076e690337 OP-1170 Got rid of more compiler warnings.
Uncrustified the code.
2014-03-04 23:45:01 +01:00
Philippe Renon
5d7e37f6b8 OP-1246 removed left over crc_table member from ground uavtalk 2014-03-04 10:03:45 +01:00
Corvus Corax
dbbb8d5e0d OP-1216 fixes as suggested in OPReview-645 2014-03-03 18:58:09 +01:00
Corvus Corax
2c99b008c6 OP-1216 some fixes to flightmode and arm state management, update GCS control widget to be able to test and debug new control infrastructure 2014-03-02 22:20:18 +01:00
Corvus Corax
12eed41e58 OP-1216 modified alarms for manualcontrol/receiver to reflect new architecture 2014-03-02 20:12:19 +01:00
Corvus Corax
3ea9042279 Merge branch 'next' into corvuscorax/OP-1216_flight-control-refurbishment 2014-03-02 14:54:01 +01:00
Philippe Renon
bb16da86ff OP-1243 fixed duplicate popup menu entries appearing when opening menu multiple times
- also removed two unconventional Close menu entries
- and other minor cleanups

+review OPReview
2014-03-02 14:07:13 +01:00
m_thread
b0bc0909ba OP-1170 Fixed MacOSX build error. 2014-02-27 11:29:53 +01:00
m_thread
a5e10d2034 OP-1170 Suppressing specific warnings not fixable. 2014-02-27 09:50:17 +01:00
m_thread
43bd1f3c69 OP-1170 Got rid of all compiler warnings in utils library. 2014-02-27 09:16:33 +01:00
m_thread
ae72735a50 OP-1170 Removed all compiler warnings from opmapcontrol library. 2014-02-27 09:08:38 +01:00
m_thread
36307100f0 OP-1170 Got rid of compiler warnings for several plugins. A few warnings are left since I dont know how to get rid of them without suppressing a whole category of warnings in all files compiled. 2014-02-26 18:33:58 +01:00
m_thread
f306a356f3 OP-1170 got rid of compiler warnings in multiple plugins. 2014-02-26 17:57:45 +01:00
m_thread
4b4f9bd108 OP-1170 Got rid of all compiler warnings in pathactioneditor plugin. 2014-02-26 17:53:22 +01:00
m_thread
a79efd7353 OP-1170 Got rid of all compiler warnings in opmap plugin. 2014-02-26 17:48:40 +01:00
m_thread
7e52a0f641 OP-1170 Got rid of all compiler warnings in ophid plugin. 2014-02-26 17:38:43 +01:00
m_thread
3c4bf5be9a OP-1170 Got rid of all compiler warnings in notify plugin. 2014-02-26 17:36:37 +01:00
m_thread
5be91fa012 OP-1170 got rid of all compiler warnings in logging plugin. 2014-02-26 17:31:01 +01:00
m_thread
460c60399b OP-1170 Got rid of all compiler warnings in lineardial plugin. 2014-02-26 17:30:04 +01:00
m_thread
929f309f61 OP-1170 Got rid of all compiler warnings in HITL plugin. 2014-02-26 17:25:49 +01:00
m_thread
15b1304fd1 OP-1170 Got rid of all compiler warnings in debuggadget plugin. 2014-02-26 17:21:38 +01:00
m_thread
2bd808995d OP-1170 got rid of all compiler warnings in Core plugin. 2014-02-26 17:19:58 +01:00
m_thread
a632b4ad06 OP-1170 Got rid of all compiler warning in Config Plugin 2014-02-26 17:17:37 +01:00
m_thread
749703d187 OP-1245 GUI fixing. 2014-02-26 15:56:20 +01:00
m_thread
607466f937 OP-1245 Adjustments to qml dialog design to accomodate log settings and control. 2014-02-26 14:44:45 +01:00
m_thread
7150a3c4be OP-1244 Changed formatting of objectid and instance id in xml export format. 2014-02-26 12:56:01 +01:00
m_thread
1d237aff96 OP-1244 Added support for flight start adjusted time stamps in exported files. 2014-02-26 12:55:32 +01:00
m_thread
c5549a287b OP-1244 Added csv export implementation. 2014-02-26 12:36:53 +01:00
m_thread
b7ab2701a4 OP-1244 Implemented xml export of flight logs. 2014-02-26 12:10:02 +01:00
m_thread
b272948ff4 OP-1244 Added basic streaming xml write support to UAVObjects. 2014-02-26 11:19:00 +01:00
m_thread
905e6a8eda OP-1244 Added basic support for multiple export format. 2014-02-26 11:17:26 +01:00
Alessio Morale
92839fe95d Uncrustify 2014-02-21 19:19:24 +01:00
Alessio Morale
89b1a43b76 Merge remote-tracking branch 'origin/amorale/OP-1100_fix_osx_file_associations' into next 2014-02-21 19:18:06 +01:00
Alessio Morale
3cf1662bc8 Merge remote-tracking branch 'origin/amorale/OP-1212_telemetry_prio_queue' into next 2014-02-21 19:16:52 +01:00
Alessio Morale
b759d38f5c Merge branch 'rel-14.01' into next 2014-02-21 19:16:02 +01:00
Alessio Morale
85c222e7cb Merge branch 'amorale/OP-1166_fix_min_less_than_1000' into rel-14.01 2014-02-21 19:05:04 +01:00
Corvus Corax
e97ce303b8 Merge branch 'corvuscorax/OP-942_task-diagnostics-for-callbacks' into next 2014-02-18 00:03:07 +01:00
Philippe Renon
f6c7b5c185 OP-1228 disabled telemetry monitor option page creation to fix gcs crash
- a fully functional option page will be re-introduced with OP-1185

+review OPReview
2014-02-17 21:32:30 +01:00
Corvus Corax
0ebc92d9f5 Merge branch 'corvuscorax/OP-942_task-diagnostics-for-callbacks' into corvuscorax/OP-1216_flight-control-refurbishment
Conflicts:
	flight/modules/AltitudeHold/altitudehold.c
2014-02-16 19:08:39 +01:00
Corvus Corax
5f2ce2e0a1 Merge branch 'next' into corvuscorax/OP-1216_flight-control-refurbishment 2014-02-16 12:26:45 +01:00
Corvus Corax
4fa62d71f8 drive-by-enhancement: assert on existance of qml fields in debug mode, helps debugging qml 2014-02-16 12:18:41 +01:00
Alessio Morale
49bc5b8cbd OP-1212 fix GCS plot configurations 2014-02-15 15:32:57 +01:00
Alessio Morale
15b1fe88cb OP-1230 Fix filename with empty label 2014-02-15 14:49:14 +01:00
Alessio Morale
8bed1e02ce OP-1230 Automatically load the firmware in build/fw_<boardname> in development environment 2014-02-15 14:34:05 +01:00
Alessio Morale
7640f72e1f OP-974 add bootloader revision info in Uploader gadget's Device Information. 2014-02-15 12:42:22 +01:00
m_thread
a99de5d326 OP-1222 Fixed svg files. Cleaned up and grouped items to work in wizard.
Removed some translations and simplified some gradients.
Added support for output calibration of Aileron and v-tail wings.
Added comments in the code explaining the various arrays with
indexes and ids in the output configuration page class.
2014-02-14 00:00:52 +01:00
m_thread
f8e6e8c183 Merge remote-tracking branch 'origin/kfinisterre/FixedWingWizard' into thread/OP-1222_Fixed_Wing_Wizard_Support
Conflicts:
	ground/openpilotgcs/src/plugins/config/cfg_vehicletypes/configfixedwingwidget.h
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2014-02-12 12:34:37 +01:00
Alessio Morale
9bb09bb4a1 OP-1100 fix app plist for invalid file associations 2014-02-11 12:22:03 +01:00
Alessio Morale
d7c18b1022 OP-1166 there was still a problem with ManualcontrolSettings.channelMin. This is a hacky workaround until the binding framework does not allow for a cleaner solution. 2014-02-10 21:53:08 +01:00
Laurent Lalanne
d1252ce261 OP-1187 rel-14.01 Updates 2014-02-09 20:09:37 +01:00
Corvus Corax
b5a27d05e7 OP-1197 configurable failsafes OP-1219 thrust control OP-1217 separate manualcontrolsettings apart 2014-02-09 19:37:22 +01:00
Laurent Lalanne
8795b1aebd Merge remote-tracking branch 'origin/rel-14.01' into laurent/OP-1187_allow_french_translations_in_future_releases 2014-02-09 19:24:15 +01:00
m_thread
3e6192f2d1 OP-1191 Uncrustify. 2014-02-09 19:12:45 +01:00
m_thread
184b161d45 OP-1191 Fixed weirdness showing in 'Edit Gadgets Mode' after switch to Fusion style. 2014-02-09 17:39:16 +01:00
m_thread
9f02d3c170 OP-1191 Added some tooltips and fixed tooltip font color in css to make it work in Fusion style on Linux. 2014-02-09 14:08:07 +01:00
m_thread
64d0f861b1 OP-1191 Gui fixes to Output configuration gui. 2014-02-09 11:36:57 +01:00
Fredrik Arvidsson
277410061a OP-1166 Channel number dropdowns not initialized properly. 2014-02-09 11:00:51 +01:00
m_thread
53c5b511af OP-1191 Fixed Stabilization gui issues. 2014-02-09 10:59:50 +01:00
m_thread
da137e18e7 OP-1191 Removed all special tweaks to the macosx css. No need to have this for fusion. 2014-02-08 13:55:32 +01:00
m_thread
0964031ae0 OP-1191 Minor gui fixes. Removed stuff from linux css file. No need to have minor tweaks to the fusion style. 2014-02-08 13:51:42 +01:00
m_thread
7d44e38daf OP-1088 Changes to the Vehicle configuration page. Changed combo box for tab bar and made the tab text translate-able. 2014-02-08 13:50:14 +01:00
Alessio Morale
4a29db4983 OP-1212 Remove priority task from taskinfo 2014-02-07 18:29:19 +01:00
Alessio Morale
0b36b39a5b OP-1150 cleanup stale debug code, fix warnings 2014-02-07 12:12:18 +01:00
Alessio Morale
679e800d48 OP-1150: Fix start button not enabled due to uninitialized member variables; 2014-02-07 12:09:03 +01:00
m_thread
986f2e3e8e OP-1191 Fixed a typo. 2014-02-06 18:30:01 +01:00
m_thread
6bfbe88813 OP-1191 Added message box stating that board reboot is needed after bind/unbind 2014-02-06 17:51:13 +01:00
Fredrik Arvidsson
9b50c26e8f OP-1088 Switched to use 'Fusion' style on the application 2014-02-06 16:37:13 +01:00
m_thread
e6a8d8f02c OP-1191 General Configuration cleanup 2014-02-06 16:28:26 +01:00
m_thread
517123d521 OP-1191 OPLink Configuration cleanup 2014-02-06 16:27:58 +01:00
Alessio Morale
7dc358ecae OP-1150 fix and uniform ui style 2014-02-06 02:14:59 +01:00
Alessio Morale
19d1618996 OP-1150: Try to fix some cases where Start in not enabled postponing m_thermalCalibrationModel->init() 2014-02-06 01:40:22 +01:00
Alessio Morale
128daa9f03 OP-1150: remove couts left from old debug code 2014-02-06 01:00:40 +01:00
Alessio Morale
8a3e737cd8 OP-1150: second order polynomial for all gyro axis. 2014-02-06 00:59:42 +01:00
Alessio Morale
f7fd5ab1d9 OP-1150: remove non existing file in config.pro 2014-02-04 21:59:15 +01:00
Alessio Morale
77288b723a OP-1150 UI for thermal calibration: show a message if calibration failed, some cleanup. 2014-02-04 00:54:57 +01:00
Alessio Morale
6431e80a5c OP-1150 UI for thermal calibration: fix missing dependency on version_info 2014-02-03 23:32:47 +01:00
Alessio Morale
ef066a63b1 OP-1150 UI for thermal calibration: get rid of accel_scale no more needed after refactoring 2014-02-03 20:25:59 +01:00
Laurent Lalanne
f0a1555c14 OP-1187 Indentation 2014-02-03 11:57:33 +01:00
Corvus Corax
b076ba02a1 OP-942 API change to CallbackScheduler - include unique ID for each callback for a taskinfo like UAVObject 2014-02-02 19:54:17 +01:00
Alessio Morale
27c19d7cb1 OP-1149/OP-1150: uncrustify/Cleanup 2014-02-02 18:53:35 +01:00
Alessio Morale
1ea4a5bf0d OP-1150 UI for thermal calibration: add a full debug log stored into a temporary directory.
Path is show in console log message. Files are cleaned up as soon as board is disconnected.
2014-02-02 18:37:33 +01:00
Alessio Morale
fb8bba4bec OP-1150 UI for thermal calibration: fill calibration extent fields for accel/gyro 2014-01-31 21:01:59 +01:00
Laurent Lalanne
66fdc73e71 OP-1187 Removed "#" 2014-01-31 19:15:15 +01:00
Philippe Renon
9e16e8f6a9 OP-1194 minor cleanups to scope gadget state persistence handling 2014-01-30 21:54:05 +01:00
Laurent Lalanne
8e837fb985 OP-1187 Wrong file copy in lasted commit.
qt_fr.qm located in tools/Qt_install_dir, allow copy of this file for all systems
2014-01-29 13:42:39 +01:00
Alessio Morale
bd5824f83d OP-1150 UI for thermal calibration: fill calibraion extent fields for baro 2014-01-28 23:11:04 +01:00
Alessio Morale
61354eaac9 OP-1150 UI for thermal calibration: UI fixes and change target gradient to .2 2014-01-28 00:13:13 +01:00
Alessio Morale
57554ec44f OP-1150 UI for thermal calibration: fix wrong condition for validating gyro calibration 2014-01-27 22:56:17 +01:00
Alessio Morale
159ba7f697 OP-1150 UI for thermal calibration: Zero gyro/accel calibration before acquisition 2014-01-27 00:25:16 +01:00
Alessio Morale
afb7ba7ea4 OP-1150 UI for thermal calibration: calculate variance before and after calibration as sanity check 2014-01-27 00:24:53 +01:00
Philippe Renon
cdeebeebb4 OP-1194 scope gadget will now persistent plot and legend visibility state between runs
+review OPReview
2014-01-26 16:54:24 +01:00
Philippe Renon
decb996801 OP-1198 allow GCS gadgets to store/restore individual state (needed for OP-1194) 2014-01-26 16:30:08 +01:00
Alessio Morale
8cb8977a9e Merge branch 'rel-14.01' of git://git.openpilot.org/OpenPilot into rel-14.01 2014-01-24 22:13:36 +01:00
Philippe Renon
7ecc247e4c Merge branch 'filnet/OP-1183_uavbrowser_displays_hex_string_as_decimal' into rel-14.01 2014-01-24 21:54:45 +01:00
Philippe Renon
6f9fe4479e Merge branch 'filnet/OP-1182_telemetry_widget_is_too_small_on_mac' into rel-14.01 2014-01-24 20:51:59 +01:00
Philippe Renon
a234f52b6d OP-1182 minor tweak of telemetry monitor widget margin for better centering 2014-01-24 20:50:13 +01:00
Alessio Morale
e28e6a76fa OP-1176 : fix Cruise Control checkboxes use wrong Default button 2014-01-24 20:19:13 +01:00
Philippe Renon
40ecef4f94 Merge branch 'OP-1184/cleanup_stack_scope_widget_plot_list' into rel-14.01 2014-01-24 19:58:01 +01:00
Philippe Renon
16ff328bfb OP-1184 removed spurious drawAntialiased setting from stack scope config
+review OPReview-632
2014-01-24 19:53:13 +01:00
Philippe Renon
b58620c981 OP-1184 removed obsolete plots from the stack scope monitor gadget
did same in TaskInfo uav object
2014-01-24 00:17:47 +01:00
Laurent Lalanne
6e6f5804b5 OP-1172 Remove unused configurations files 2014-01-23 19:15:50 +01:00
Alessio Morale
02c7084196 Merge remote-tracking branch 'origin/next' into amorale/OP-1149_gyro_accel_thermal_calibration
Conflicts:
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2014-01-23 01:02:13 +01:00
Laurent Lalanne
ddde8a9596 OP-1187 Should be the last update before RC release if no changes in Gui/text 2014-01-22 23:34:21 +01:00
Laurent Lalanne
15dfec2d70 Merge remote-tracking branch 'origin/rel-14.01' into laurent/OP-1187_allow_french_translations_in_future_releases 2014-01-22 23:24:45 +01:00
Philippe Renon
ae3d2f41b8 OP-1183 UAVObjectBrowser - fixed issue in newly added hex string editor 2014-01-22 21:35:06 +01:00
Philippe Renon
a41930a5e2 Merge remote-tracking branch 'origin/filnet/OP-1182_telemetry_widget_is_too_small_on_mac' into rel-14.01 2014-01-22 20:59:26 +01:00
Alessio Morale
2d11f81e8a Merge branch 'amorale/OP-1179_about_box_not_working_on_linux' into rel-14.01 2014-01-22 20:27:14 +01:00
Laurent Lalanne
8c06db7c3d OP-1187 Spell check... 2014-01-22 19:59:32 +01:00
Corvus Corax
59b50ee84e uncrustification 2014-01-22 18:30:30 +01:00
Laurent Lalanne
28f96ebd31 OP-1187 Review from Joël (eyesonsky) Thanks ! 2014-01-22 18:08:55 +01:00
Philippe Renon
d8e1d849f5 OP-1183 UAVObjectBrowser now displays and allows editing of integers in
hex format (when unit is set to hex)

+review OPReview
2014-01-21 23:08:13 +01:00
Philippe Renon
0c8756b496 OP-1182 second attempt at fixing telemetry monitor widget size too small on Mac 2014-01-21 22:51:46 +01:00
Laurent Lalanne
eadb9d69f3 OP-1187 New branch laurent/OP-1187_allow_french_translations_in_future_releases
Updated lasted text in radio inputs
2014-01-21 20:52:52 +01:00
Laurent Lalanne
64485f1cf8 Merge remote-tracking branch 'origin/rel-14.01' into laurent/OP-1187_allow_french_translations_in_future_releases 2014-01-21 20:37:18 +01:00
Philippe Renon
3ce504ac6e OP-1182 tried to make device list combo box wide enough to display "USB: OPLinkMini" on all OSes 2014-01-21 02:42:11 +01:00
Philippe Renon
ff6c5e80a0 OP-1182 attempt at fixing telemetry monitor widget size too small on Mac 2014-01-21 02:40:15 +01:00
Fredrik Arvidsson
1537dc4187 OP-1166 Adde some more nice to have functionality to the channel configuration gui. 2014-01-21 00:49:46 +01:00
Fredrik Arvidsson
4cac7d18ac OP-1166 Fixes the maxed out bug and beautifies some gui. 2014-01-21 00:06:20 +01:00
Fredrik Arvidsson
e14acffd5c Merge branch 'thread/OP-1178_OPLink_Configuration' into rel-14.01 2014-01-20 07:21:13 +01:00
Fredrik Arvidsson
5fd8db6c5a Merge branch 'thread/OP-1168_Reload_Board_Data_Fix' into rel-14.01 2014-01-19 23:18:10 +01:00
Fredrik Arvidsson
a2f69a5ad6 OP-1168, OP-1180 Fixing Reload for AltitudeHold page. Fixing Realtime updates checkboxes. 2014-01-19 23:15:53 +01:00
Alessio Morale
e55345223c OP-1179 fix linux packages for missing .so that causes blank about box 2014-01-19 18:12:44 +01:00
Fredrik Arvidsson
9727456ec2 OP-1178 Fixed QLineEdit support. Rgression from Re-factoring. 2014-01-19 17:20:03 +01:00
Laurent Lalanne
faaf883a0b Updated Feed Forward tuning page 2014-01-19 14:35:17 +01:00
Fredrik Arvidsson
bfc2dc03a5 Merge branch 'thread/OP-1168_Reload_Board_Data_Fix' into rel-14.01 2014-01-19 14:09:00 +01:00
Fredrik Arvidsson
8fb17f7383 OP-1168 Bug made Reload board data not work. 2014-01-19 14:07:48 +01:00
Laurent Lalanne
2c3d6445b9 Anti-windup / advanced Camera stab updated 2014-01-19 13:34:36 +01:00
Alessio Morale
ba0001981b Merge remote-tracking branch 'origin/laurent/OP-1151_PFD_inverted_flight' into next 2014-01-19 12:34:34 +01:00
Fredrik Arvidsson
694abb26c6 OP-1169 Minor performance fix. 2014-01-19 00:19:12 +01:00
Laurent Lalanne
bd66d4b263 Update 2014-01-19 00:06:20 +01:00
Fredrik Arvidsson
3936173017 OP-1169 Found the 'Control' item bug and fixed some minor things. 2014-01-18 23:39:46 +01:00
Laurent Lalanne
4d6baf47f9 Updates, re-read and some problems inside source code are reported with a flag "Typo" in translator comments. 2014-01-18 17:51:38 +01:00
Alessio Morale
6d63b6b9b0 Merge remote-tracking branch 'origin/fnurgel/OP-1162_linux_deb_packaging_qt5' into next 2014-01-18 14:18:46 +01:00
Alessio Morale
e58f66db73 Merge remote-tracking branch 'origin/amorale/OP-1160_add_prepare_target_and_hooks' into next 2014-01-18 13:56:08 +01:00
Alessio Morale
f5bd8a556d Merge remote-tracking branch 'origin/amorale/OP-1155_osx_package' into next 2014-01-18 13:54:57 +01:00
Alessio Morale
ab0406a6c8 OP-1150 UI for thermal calibration: Uncrustify 2014-01-18 13:48:41 +01:00
Alessio Morale
25f75f0b8e OP-1150 UI for thermal calibration: add a completed state, some other fixes to FSM 2014-01-18 13:46:32 +01:00
Alessio Morale
3a5213ac9f OP-1150 UI for thermal calibration: Calculation relative error checking 2014-01-18 13:46:05 +01:00
Alessio Morale
a82873f7ba OP-1150 UI for thermal calibration: fix acquisition not stopping after exiting its state 2014-01-18 13:45:00 +01:00
Alessio Morale
ebb075fcfd OP-1150 UI for thermal calibration: Add calibration calculation 2014-01-18 13:43:45 +01:00
Laurent Lalanne
4414d11417 OP-1172 Some fonts are not defined in config files
Fix all font names not defined in default Gcs config files
2014-01-18 12:30:24 +01:00
Laurent Lalanne
ae679d5a04 Fixes in config.pro with original from next 2014-01-18 03:59:56 +01:00
Laurent Lalanne
0b27657dcf Merge remote-tracking branch 'origin/next' into translations_next 2014-01-18 02:39:06 +01:00
Laurent Lalanne
94f29cdb10 Cruize Control text updated 2014-01-18 01:43:45 +01:00
Corvus Corax
91d5a865da uncrustification 2014-01-18 00:32:50 +01:00
Laurent Lalanne
96555373e7 Merge remote-tracking branch 'origin/next' into translations_next 2014-01-18 00:03:13 +01:00
Laurent Lalanne
43703dd6d9 Updates about "Windup" 2014-01-18 00:02:00 +01:00
Alessio Morale
eef8bebf15 OP-1150 UI for thermal calibration: put everything inside OpenPilot namespaces 2014-01-17 18:58:35 +01:00
Alessio Morale
3f5af83d42 OP-1150 UI for thermal calibration: fix deadlock at end of acquisition, moved uavo disconnect at state exit to handle abort 2014-01-17 18:57:09 +01:00
m_thread
83b3a9bf12 OP-1154 Gui Fiddling. 2014-01-17 14:20:18 +01:00
m_thread
234626444e Merge remote-tracking branch 'origin/next' into thread/OP-1154_Cruise_Control_automatically_increase_copter_throttle_per 2014-01-17 13:16:15 +01:00
m_thread
cc551d4acb OP-1154 Fixed values from not loading in comboboxes properly. 2014-01-17 11:01:05 +01:00
Cliff Geerdes
42dda77264 OP-1154 neated up input page, tooltips, labels were cut off, etc. 2014-01-17 01:07:43 -05:00
Fredrik Arvidsson
60465bbd7d OP-984 Missed something :/ 2014-01-17 01:23:17 +01:00
Fredrik Arvidsson
2e2bd096d0 OP-984 Moved Cruise control settings to input config page. Added PID bank settings per flight mode switch position.
Field CruiseControlFlightModeSwitchPosEnable needs to be changed to an array of booleans to work with gui.
2014-01-17 01:15:02 +01:00
Laurent Lalanne
a162d885a8 Accentuations missed in capital letters 2014-01-16 23:19:54 +01:00
Alessio Morale
847c3327eb OP-1150 UI for thermal calibration: Samples acquisition and rough progressbar working 2014-01-16 23:09:08 +01:00
Cliff Geerdes
bfb5a248a0 OP-1154 enables for individual flight mode switch positions 2014-01-16 16:51:19 -05:00
Laurent Lalanne
e0098b8f54 Updated new strings in Next 2014-01-16 19:59:59 +01:00
Laurent Lalanne
8c4e45a893 Merge remote-tracking branch 'origin/next' into translations_next 2014-01-16 19:18:44 +01:00
Philippe Renon
9229da9c89 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next 2014-01-16 19:02:39 +01:00
Philippe Renon
b69621ba11 OP-984 fixed jumping PID Tab in stabilization config panel 2014-01-16 19:01:44 +01:00
Corvus Corax
41202a0227 Merge branch 'corvuscorax/OP-1022_AH_improvements_amorale' into next 2014-01-15 22:47:42 +01:00
Philippe Renon
694747cd27 Merge remote-tracking branch 'origin/next' into filnet/OP-1122_gcs_waypoint_editor_stabilization
Conflicts:
	ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
2014-01-15 20:12:08 +01:00
Corvus Corax
eb8d57cf31 uncrustification 2014-01-15 18:47:47 +01:00
Corvus Corax
9997f14d68 Merge remote-tracking branch 'origin/next' into corvuscorax/OP-1022_AH_improvements_amorale 2014-01-15 18:45:09 +01:00
Philippe Renon
d43b220dc0 OP-1122 uncrustified gcs and flight 2014-01-14 22:46:01 +01:00
Philippe Renon
c8cb666271 OP-1122 fixed wrong Timeout legend in waypoint editor (was (ms) instead of (s))
+review OPReview-609
2014-01-14 21:08:27 +01:00
Philippe Renon
96588ab13e OP-1122 OP-1145 fixed logging helper as per review
+review OPReview-604
2014-01-14 21:05:27 +01:00
Philippe Renon
7f2c24db2b OP-1122 OP-1158 - renamed uavobject FlightPlan to PathPlan
+review OPReview-609
2014-01-14 21:05:16 +01:00
Alessio Morale
0423d4ce99 OP-1160 Copydata was pointing to OPENSSL instead of OPENSSL_DIR, added related
export in tool.mk
2014-01-14 12:50:31 +01:00
Corvus Corax
07d5c8e4d2 OP-1022 fixed the config plugin widget to represent new simpler settings layout 2014-01-14 00:26:27 +01:00
Alessio Morale
0a43971dc1 OP-1150 UI for thermal calibration: Uncrustify 2014-01-13 02:35:41 +01:00
Alessio Morale
70e13b461f OP-1150 UI for thermal calibration: Fix cut/paste incident 2014-01-13 02:31:36 +01:00
Alessio Morale
67d25a27ac OP-1150 UI for thermal calibration: Add an instruction label to describe the current Status 2014-01-13 02:03:47 +01:00
Alessio Morale
52da1a2aa6 OP-1150 UI for thermal calibration: Connect State machine to UI 2014-01-13 02:03:01 +01:00
Alessio Morale
89dc9a03ec OP-1150 UI for thermal calibration: Initial state machine implementation (Save setting and setup board working) 2014-01-13 02:02:05 +01:00
Alessio Morale
026247fd5c OP-1150 UI for thermal calibration: Add state transitions for saving/restoring settings and board setup 2014-01-13 01:58:34 +01:00
Alessio Morale
1b13bae126 OP-1150 UI for thermal calibration: move into calibration/thermal 2014-01-13 01:55:44 +01:00
Alessio Morale
7cd3e83fbc OP-1150/OP-1068 Fix signal name in wizardmodel 2014-01-13 01:48:33 +01:00
Philippe Renon
a64720a9f1 OP-1122 OP-1158 added flight plan CRC consistency checks (in GCS and fixedwingpathfollower module)
- need to do the same in vtolpathfollower module)
- addressed an issue that could cause unwanted waypoints to be used (path follower was looping over all instanciated wp)
2014-01-12 19:42:12 +01:00
Philippe Renon
ff8a001a51 Merge remote-tracking branch 'origin/next' into filnet/OP-1122_gcs_waypoint_editor_stabilization
Conflicts:
	ground/openpilotgcs/src/plugins/config/configpipxtremewidget.cpp
	ground/openpilotgcs/src/plugins/uavobjectutil/uavobjectutilmanager.cpp
2014-01-12 16:29:17 +01:00
Philippe Renon
aa24f2193a OP-1122 OP-1158 renamed FlightPlanInfo uavobject to FlightPlan 2014-01-12 15:23:21 +01:00
Philippe Renon
78fabdd4c3 OP-1122 OP-1158 added facility to update a CRC with uavobject data (ground side) 2014-01-12 15:08:12 +01:00
Alessio Morale
39f3d36e09 OP-1150/OP-1068 Fix headers for wizard infrastructure 2014-01-11 23:12:14 +01:00
Alessio Morale
ce2113f912 OP-1150/OP-1068: Create a QStateMachine based wizard infrastructure 2014-01-11 21:18:45 +01:00
Alessio Morale
1f27bffb38 OP-1150 UI for thermal calibration: Adding UI design 2014-01-11 21:07:03 +01:00
Fredrik Arvidsson
b43cf9a7fe OP-984 Commented out some annoying debug prints. 2014-01-11 16:14:12 +01:00
Fredrik Arvidsson
38a709a0da OP-984 Fixed false dirty indication. Added some constant. 2014-01-11 15:44:07 +01:00
Fredrik Arvidsson
b14c8bd4d2 OP-984 Gui fixes 2014-01-11 15:23:11 +01:00
Fredrik Arvidsson
92c7e96fc8 Merge remote-tracking branch 'origin/LesNewell/OP-984_PID_banks' into thread/OP-984_PID_banks_GUI
Conflicts:
	ground/openpilotgcs/src/plugins/config/stabilization.ui
2014-01-11 09:41:36 +01:00
Corvus Corax
4c078f3dd8 Merge branch 'next' into corvuscorax/OP-1022_AH_improvements_amorale 2014-01-11 09:40:34 +01:00
Mikael Blomqvist
c98b8b4763 Fix for broken dependency lookup during deb packaging 2014-01-11 01:11:00 +01:00
Laurent Lalanne
b0614259dc Translations fixes 2014-01-10 23:51:57 +01:00
a*morale
4738e4eafc OP-1155 OSX Package: Add QtQuick plugin deployment to copydata.pro 2014-01-10 23:25:35 +01:00
a*morale
11259a3ac3 Merge remote-tracking branch 'origin/fnurgel/linux_deb_packaging_qt5' into amorale/OP-1155_osx_package 2014-01-10 23:24:18 +01:00
Les Newell
49cf33ee59 Merge branch 'next' into LesNewell/OP-984_PID_banks
Conflicts:
	flight/modules/Stabilization/stabilization.c
2014-01-10 19:32:44 +00:00
Laurent Lalanne
e904c9f9cf Horizon line is now displayed fine when board is in inverted flight, center of rotation is located on yellow arrows. 2014-01-10 19:10:28 +01:00
Les Newell
8eb2eefec7 Merge branch 'LesNewell/OP-984_PID_banks' into next 2014-01-10 15:24:28 +00:00
Alessio Morale
6d3dca6ee3 Merge remote-tracking branch 'origin/theothercliff/OP-1117_multi_wii_horizon_flight_mode_only' into next 2014-01-10 10:43:53 +01:00
a*morale
bab382a3df OP-1155 OSX Package: Set QMAKE_MACOSX_DEPLOYMENT_TARGET 2014-01-10 00:44:12 +01:00
Philippe Renon
9c7fcbe47c [OP-1105] uncrustified 2014-01-09 21:17:44 +01:00
Fredrik Arvidsson
3d8e3eb823 OP-984 Uncrustify. 2014-01-09 19:52:56 +01:00
Fredrik Arvidsson
cd5fb01d7e Merge remote-tracking branch 'origin/next' into thread/OP-984_PID_banks_GUI 2014-01-09 19:29:53 +01:00
m_thread
41506803e6 OP-984 Some gui fiddling. 2014-01-09 19:00:24 +01:00
Mikael Blomqvist
6379a7d937 deb package now bundles qt5 libs and goodies 2014-01-09 15:57:12 +01:00
m_thread
68573af710 OP-984 Feature complete. 2014-01-09 13:34:11 +01:00
m_thread
088197ac69 OP-984 Added backing store for values when switching between uavos. 2014-01-09 13:02:03 +01:00
Fredrik Arvidsson
a3c03b0244 OP-984 Minor changes. 2014-01-09 09:39:47 +01:00
Philippe Renon
e716d97803 OP-1122 OP-1120 moved CRC8 utility from uavtalk.cpp to new utils/crc.cpp 2014-01-09 01:10:18 +01:00
Philippe Renon
f422a1d639 OP-1122 OP-1145 made ground uavtalk code more similar to its flight side version 2014-01-09 01:07:25 +01:00
Philippe Renon
8c7792b6e5 OP-1122 OP-1120 Added a new FligthPlanInfo uavobject
- FligthPlanInfo contains the number of waypoints and action pathes
- FligthPlanInfo contains a CRC of all waypoints and action pathes
- The CRC is not yet implemented
- These informations will be used to check the consistency of a flight plan
2014-01-09 01:06:00 +01:00
Philippe Renon
339e69f25d OP-1122 OP-1123 fixed OSX specific GCS compilation errors 2014-01-09 00:00:00 +01:00
Fredrik Arvidsson
958efa62e1 OP-984 Added code to allow switching between pid banks by selecting tabs
The tabs are now dynamically created from a constant.
2014-01-08 00:33:45 +01:00
Alessio Morale
ecaaf84a79 OP-1150 add code to calculate the thermal calibration coefficients for baro, gyro and accel 2014-01-08 00:01:00 +01:00
Fredrik Arvidsson
99cfa5339d OP-984 UI changes. Added TabBars to visually simulate PID bank change. 2014-01-07 23:04:32 +01:00
Philippe Renon
ee1584d639 OP-1122 OP-1145 uavobject toStringBrief now displays the object Id as in hexadecimal format 2014-01-07 21:55:26 +01:00
Alessio Morale
78f77e8d3f OP-1150 Make calibrationutil class static and include the Polynomial fit algorithm 2014-01-07 19:50:53 +01:00
Fredrik Arvidsson
15cf91aa53 OP-984 UI changes. 2014-01-06 23:31:46 +01:00
Fredrik Arvidsson
69e5f0c186 OP-984 Minor fixes before actual gui changes. 2014-01-06 22:25:38 +01:00
Philippe Renon
772c395e67 OP-1122 OP-1145 fixed handling of ground messages done by OPLM
- OPLM used to receive and relay all messages
- OPLM will now reveice only specific messages and relay others as required (needs to be reviewed...)
- add RadioComBridgeStats uavobject to collect and report tx/rx statistics
- made error handling more robust
- added a few FIXMEs
2014-01-06 21:35:00 +01:00
Fredrik Arvidsson
a2e0158bfb OP-984 Closing in... 2014-01-06 17:25:39 +01:00
Fredrik Arvidsson
f8714de85b OP-984 Fixed a double dispose issue in destructor. 2014-01-06 13:33:22 +01:00
Fredrik Arvidsson
3ed61a37d0 OP-984 More refactoring. 2014-01-06 12:56:30 +01:00
Fredrik Arvidsson
c24753603a OP-984 Adding support for multiple bindings per widget. 2014-01-06 11:54:34 +01:00
Alessio Morale
46ff4c8bf9 OP-1150 Add calibration util class implementing polynomial/ellipsoid fit algorithms 2014-01-06 11:11:16 +01:00
Alessio Morale
82691a9348 OP-1150 Update Eigen 2014-01-06 11:09:22 +01:00
Philippe Renon
329ea821f8 [OP-1105] improved handling of missing firmware description in GCS
- fixed logging spam introduced by previous commit
2014-01-05 23:05:36 +01:00
Philippe Renon
ec421ad962 [OP-1105] improved handling of missing firmware description in GCS
- fixed logging spam introduced by previous commit
2014-01-05 22:27:54 +01:00
Philippe Renon
6b3a02c485 [OP-1105] improved handling of missing firmware description in GCS 2014-01-05 18:53:21 +01:00
Philippe Renon
cceb9a363c [OP-1105] improved handling of missing firmware description in GCS 2014-01-05 18:45:57 +01:00
Cliff Geerdes
a48b9cc242 OP-1117 reduced CPU for CC/3D coded log2f() / powf() 2014-01-04 04:22:54 -05:00
Laurent Lalanne
529f0ade4b Translation progress 2014-01-03 13:52:54 +01:00
Fredrik Arvidsson
b97c410e37 OP-984 Small fixes after re-factoring. 2014-01-02 20:47:23 +01:00
Fredrik Arvidsson
ab27f41734 OP-984 Refactoring. 2014-01-01 23:17:31 +01:00
Fredrik Arvidsson
1ea13ba161 OP-984 More refactorng. 2014-01-01 23:03:20 +01:00
Fredrik Arvidsson
b244f8a3cd OP-984 Some refactoring to prepare for multi PID bank GUI support. 2014-01-01 22:49:04 +01:00
Alessio Morale
4b5ee1c2fb OP-1149 Changes to GCS to use AccelGyroSettings for bias calculations 2013-12-29 18:58:45 +01:00
Fredrik Arvidsson
99d6c9e4bd OP-984 Added GUI for selecting PID bank for TxPID module. 2013-12-29 18:02:16 +01:00
Fredrik Arvidsson
dfc5a745cd OP-984 Added GUI to configure which PID bank to use for the 3 common stabilization modes. 2013-12-29 17:47:27 +01:00
Laurent Lalanne
3081b94694 Translation progress 2013-12-28 21:37:33 +01:00
Corvus Corax
d60eda1a83 forgot uncrustification 2013-12-27 18:37:14 +01:00
Corvus Corax
36788a60f4 bugfix for xplane hitl, convert gyroscope sensor from rad/s to deg/s 2013-12-27 16:26:59 +01:00
Corvus Corax
66d1141c7f Merge remote-tracking branch 'origin/next' into corvuscorax/OP-1022_AH_improvements_amorale 2013-12-27 13:47:45 +01:00
Alessio Morale
a340c06b01 OP-1149 Changes to GCS to accounts for UAVO Changes from previous commit 2013-12-26 16:56:54 +01:00
Laurent Lalanne
bdbbaa4f93 Merge branch 'next' into translations_next
Conflicts:
	ground/openpilotgcs/src/libs/utils/logfile.cpp
	ground/openpilotgcs/src/libs/utils/logfile.h
	ground/openpilotgcs/src/plugins/coreplugin/aboutdialog.cpp
	ground/openpilotgcs/src/plugins/coreplugin/aboutdialog.h
	ground/openpilotgcs/src/plugins/telemetry/monitorwidget.h
	ground/openpilotgcs/src/plugins/telemetry/telemetry_global.h
2013-12-23 13:02:27 +01:00
Kevin Finisterre
3862c9cfaa settings still not saving to the board... trying to sort it out. Making sure all necessary codepaths exist in the FixedWing clone of the MultiRotor code for the Wizard. 2013-12-20 02:08:08 -05:00
Cliff Geerdes
14aa1f83de OP-1117 make anti windup insensitive to Ki changes, include dT in calcs, linearize config spinner 2013-12-19 03:21:30 -05:00
Philippe Renon
02e3970864 OP-1122 OP-1145 ground side uavtalk and telemetry enhancements
- added more stats (bytes, sync errors, crc errors)
- made error handling more robust
2013-12-19 03:19:29 +01:00
Kevin Finisterre
6ee5baa146 I was aparantly missing a call to updateAirframe(frameType); 2013-12-18 17:28:25 -05:00