1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-05 13:24:11 +01:00
Commit Graph

724 Commits

Author SHA1 Message Date
andrew
2f38fe2269 Updated Alarms.c Modified flight alarm code to NOT set SystemAlarms to an "Uninitialised" value on startup.
This allows the UAVObjectGenerator generated code to set the default values.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2301 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-28 04:19:41 +00:00
andrew
bdb2982ca5 Added alarm processing for GPS module.
Error when GPS disconnected
  OK when >=7 satellites and PDOP <3.5
  Warning when only 3Dfix
  Critical otherwise

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2297 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-27 19:59:43 +00:00
andrew
e7e0f6740b Modified flight alarm code to set SystemAlarms to an "Uninitialised" value on startup.
This means that any defined alarms that don't have their flight module compiled in will show uninitialised rather than OK

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2295 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-27 07:30:36 +00:00
andrew
39cb30d56f Update to SystemAlarms UAVObject.
Added:
Battery
Flight Time
I2C
GPS
Also added new alarm state of "Uninitialised"

no code to set these alarms yet.

As this changes UAVObjects both flight and GCS software will need to be recompiled to stay in sync.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2294 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-27 07:25:52 +00:00
pip
d072c30ba1 Settings additions.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2274 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-22 22:16:44 +00:00
cwabbott
7715a6d6cd PiOS.win32: Add MMCSS support for Vista onward, and smarter priority boosting to XP. Also, add the Actuator module and the fake pios_servo.c. If you run this using Windows 7 or Vista, then you need to run OpenPilot.exe as administrator once to set up the registry.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2270 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-22 14:47:42 +00:00
edouard
d8edab8371 Added a (fake) pios_servo module in PiOS.posix, this makes it possible to compile the Actuator module and see servo output values, or at least
what they would be on a real board. Also fixed a typo in stabilization.c which made me lose time when trying to understand the code...




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2260 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-20 16:38:17 +00:00
osnwt
801568269c 2251 rev changes reverted. Let someone change UAVObjects to provide calibrated altitude and/or offset to HomeLocation and/or take off location (which can be quite different including elevation). But please do not forget that many of users do not have the GCS with Internet at field and/or do not have sufficient weather/baro/altitude condition info for their country. So the solution should provide also a way to 'drive-power-launch'.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2259 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-20 05:20:06 +00:00
corvus
1aa6a206db Sim_Posix: Updated Makefile to include some recently changed/new UAVObjects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2253 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-19 11:29:24 +00:00
osnwt
7d084aca49 Added power-up barometric altitude calibration. Height accuracy is not sufficient, for better results we may want some filtering and/or another sensor/ADC. But at least now the BaroAltitude.Altitude object provides meaningful data comparing to uncalibrated zero height.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2251 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-18 23:40:17 +00:00
cwabbott
0b985b2168 PiOS.win32: Various fixes to get it working again, added a sim_win32 option to the main makefile.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2249 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-18 18:41:37 +00:00
pip
e84b222272 PipX modem settings update .. note that they do not yet function.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2248 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-18 13:54:35 +00:00
peabody124
af99c31a61 PiOS/I2C: Fixed typo and also the values for I2C Diagnostics when disabled.
Enabled by default though.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2243 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-18 07:09:28 +00:00
peabody124
4b4a66c2d7 PiOS/I2C: Lots of small changes. Added a few weird bus events that are
sometimes thrown, and made errors not lock it up by default.  It works for me,
but since this has historically been associated with lots of lock ups please
check your systems carefully.

PiOS/I2C: Make the bus by default try to recover from errors instead of locking
up

PiOS/I2C: After a bus error and clocking all previous data create a STOP
condition to make sure bus is released (note, this also requires creating a
START condition first)

PiOS/I2C: If the same event hits the I2C bus twice in a row then disregard
second one, there is no situation where we should get the same event multiple
times that matters and this gets us out really quickly to catch the real
events.  I was seeing this with repeated 0x70084 which means byte transmitted.
This is related to STM32 bugs in the IRQ timings I believe.

PiOS/I2C: 1) Mask out some bits we don't care about in the event flags
2) Don't lock up if the give semaphore fails, although why it does is strange
3) Recover from bus failure through the "auto" state path instead of just
coding state

PiOS/I2C: Change the reset bus code to follow
http://www.analog.com/static/imported-files/application_notes/54305147357414AN686_0.pdf
(thanks for the reference Neontangerine).  Although this may actually NOT clear
the bus the first time through, subsequent bus errors should eventually clock
it out.  The up side is it is less likely to clock a bunch of 1s into an ESC
and make it run up.

PiOS/I2C: Some cleaned up code for getting a snippet of the history when
something strange happens

PiOS/I2C: Export logging information from I2C through a UAV object

PiOS/I2C: Improve the diagnostic information

PiOS/I2C: Need to handle the event 0x30084.  This seems to happen between a
byte transmitted and new byte started

PiOS/I2C: Handle the NACK condition by simply going to the stopping state.

PiOS/I2C: Add a new NACK state to handle sending the STOP signal after a NACK
following the STM documentation.  Other error conditions still are not dealt
with.

PiOS/I2C: Should handle the NACK condition from all the write cases.  Need to
think about read cases

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2239 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-17 07:01:58 +00:00
zedamota
c034a35d2c OP-21/Bootloader - Changes to the IAPObject. Implements MB and AHRS user mode IAPObject. Added user mode reset command to the CLI. To many changes to bootloading system to write here, a Wiki page will have to be writen.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2238 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-15 19:06:28 +00:00
edouard
4be34fdb0f Modified all channel naming internally to use Channel 1 to Channel 8, instead of the previous convention of Channel0 to Channel7.
BEWARE: I have not flown my quad with this code, so please be careful, test, and report!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2234 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-13 23:54:30 +00:00
peabody124
9250470c98 Guidance: In velocity control use maximum groundspeed to cap the velocity
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2229 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-13 07:03:04 +00:00
pip
9ceda82fba Updated UAVObjects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2227 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-12 18:26:51 +00:00
pip
d5f6504aa2 Updated UAVObjects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2224 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-12 18:16:24 +00:00
pip
b4e4d4ed5e Adding PipX modem settings/status UAVObjects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2219 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-11 10:56:42 +00:00
pip
8b2e1c32d7 Adding PipX modem settings/status UAVObjects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2218 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-11 10:56:33 +00:00
peabody124
fd10c6ffff Guidance: Small sign error
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2209 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-10 17:14:35 +00:00
peabody124
d218e18ded AHRS: Make arm timeout of 0 disable feature for planes. Don't want them arming
out.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2205 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-08 20:07:34 +00:00
pip
5e91f46633 Added more telemetry baudrate options
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2198 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-06 08:31:24 +00:00
pip
49e99ea180 Added more telemetry baudrate options
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2195 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-06 08:23:20 +00:00
peabody124
4e8c6588b6 OP-156 AHRS: Run the accel data through a fifo so it can output raw data faster
than the ekf runs and also be more tolerant of timing jitter

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2191 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-04 17:34:29 +00:00
peabody124
6f1e7b4e41 AHRS: Add a configuration to export the sensor data either with or without INS
bias correction.  This is useful for stabilization to get rid of the gyro bias.
Making it an option is important for calibration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2189 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-04 17:34:25 +00:00
peabody124
e861bcb9d0 Flight/Guidance: Convert PositionPID mode to PositionPI + Velocity feedback.
Needs AHRS with accel_bias estimation to behave well.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2187 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-04 17:34:19 +00:00
peabody124
a04e33ccc6 OP-192 Flight/ManualControl: Add an ArmedTimeout field to the
ManualControlSettings so that planes can disable the timeout
feature for gliding (holding roll on a plane not so good).

Note: This will require you to reconfigure your ManualControlSettings

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2185 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-04 17:34:16 +00:00
peabody124
4f21bee0d7 OP-192 Flight/ManualControl: Correctly convert to ms in timeout code so system
will automatically disarm after 30 seconds without motor.  This behavior will
need to be parameterized for planes which might idle for a while.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2181 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-01 22:12:01 +00:00
andrew
c94c76ce40 Minor change to give back manual control to an axis when it is set to stabilization = None
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2165 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-27 04:03:37 +00:00
edouard
b840c5ec40 Update ActuatorSettings to remove obsolete fields.
YOU WILL NEED TO RECONFIGURE YOUR ACTUATORS!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2162 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-26 20:55:05 +00:00
peabody124
ebcb272da6 AHRS: Add a separate parameter for velocity and position variance and remove
indoor from the name since it's used for both indoor and outdoor mode now.
Increased default value to 0.4 to better reflect the GPS accuracy.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2156 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-26 15:57:08 +00:00
dschin
b2a538375c Changes in files supporting AHRS for new initialization methods.
Changes in ahrs.c for new initialization and to fix issues with outdoor algorithm.  The changes in ahrs.c are pretty messy, but committed mostly to get the code to Peabody for more extensive restructuring of ahrs.c.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2150 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-24 01:27:43 +00:00
peabody124
d2b468d661 Flight/Stabilization: Need to either set or clear the alarm, but the way it was
before cleared at the end of each loop - including one after an alarm

Flight/Actuator: Similar change to make sure not having updates from
stabilization (i.e. no AHRS) doesn't trigger a watchdog reset

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2140 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 17:13:42 +00:00
osnwt
ed49f7fc40 Prevent some compiler warnings treated as errors during RELEASE build (possible use of uninitialized variables - CodeSourcery under Windows build system). It may be done with some #pragma as well, but this way is more portable.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2132 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-21 13:09:05 +00:00
cwabbott
2dde28843b PiOS/win32: UAVObject fixes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2114 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-13 15:46:37 +00:00
peabody124
54aa09ce27 OP-163 Flight/Guidance: Take current position as desired position
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2111 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-12 16:57:16 +00:00
peabody124
6ebc8ccd57 OP-163 Flight/Guidance: Add variations on position hold to try out. Only one will end
up in the final code.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2110 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-12 16:57:13 +00:00
peabody124
5850c1804d OP-199 Flight/Stabilization: Increment a counter in actuatorDesired whenever an
update takes longer than 15 ms

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2109 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-12 04:36:04 +00:00
corvus
bb1b6d8b8d sim_posix: added missing UAVobject source file to Makefile
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2086 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-06 15:33:54 +00:00
peabody124
834eecfc1f OP-200 Flight/Watchdog: Have flag that is set from actuator, ahrs_comms, manual
and stabilization that is monitored by watchdog.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2078 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-05 14:28:21 +00:00
peabody124
f950b9f6c0 Flight/ManualControl: Make it so the disarmed signal itself changes when GCS
lost.  Warning though: it takes ~5-10 seconds for the flight telemetry status
to go from connected so this solution still isn't great.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2070 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-04 02:30:53 +00:00
peabody124
7bdd900409 Flight/Manual: Cleaner solution to deal with timer wraparound
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2069 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-04 02:30:51 +00:00
peabody124
1f87715719 OP-192 Flight/ManualControl: Add a timeout to the armed signal. Leaving throttle < 0
for 30 seconds disables it.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2068 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-04 02:30:49 +00:00
peabody124
c69c4157f1 Flight/Actuator: Add failsafe for when flying via GCS to disarm at
lost connection

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2067 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-04 02:30:47 +00:00
peabody124
34bd4b7524 OP-198 Flight/GPS: Remove dependency on buffer.c, also made the detection of start and
end characters occur while sentence coming in instead of reprocessing whole
sentence for each character

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2041 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-30 18:15:52 +00:00
pip
ed03a45ee5 Added extra error checking - making sure the packet size is valid and that packet sizes match.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2039 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-30 15:00:36 +00:00
sambas
3f62776253 OP-97 flight/GPS: Few more fixes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2028 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-28 14:58:39 +00:00
peabody124
b9f74a86c3 OP-198 Flight/Libraries: Swap to using circular buffer code from Pip because it
supports thread safe write/read simultaneously

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2027 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-28 14:30:03 +00:00
sambas
365a2a121a OP-97 flight/GPS: Few fixes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2025 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-28 13:50:34 +00:00
peabody124
aada18a0ea UAVTalk: Update protcol version number to go with new packet format and changed
a few constants to make it self documenting

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2017 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 17:41:41 +00:00
peabody124
4570d6df23 UAVTalk: Insert a sync byte (0x3C) and the packet size to facilitating handling
by PipX modems.  This is a change to UAVTalk so GCS and the hardware must all
be updated.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2016 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 17:16:29 +00:00
sambas
3e462b1434 OP-97 flight/GPS: Disable speed threshold command for those who knows it's needed, check gpsTask->DISABLE_GPS_TRESHOLD
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2014 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 15:51:33 +00:00
peabody124
2019edd612 AHRS: Store running time to make detect resets easier. Update OP and AHRS in
parallel for this update.  Also removed comment for rawhid

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2012 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 14:31:32 +00:00
sambas
f1ba558fa1 Flight/GPS: Some updates
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2011 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 10:39:38 +00:00
peabody124
a2e0cd2240 Stabilization: Dont make queue respond to both raw sensors and attitude because
causes it to trigger most of the time every 1 ms which is consuming tons of
CPU.  Also lower the failsafe timeout since its likely due to overloading the
event system and we don't want to delay 100 ms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2005 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-24 20:00:05 +00:00
peabody124
9944cdfcb0 Flight/RateDesired: UAVObject for monitoring the desired rate out of
stabilization for diagnostics

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2004 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-24 20:00:02 +00:00
ligi
523b6ad8f7 added hint on how to better distinguish FC/NC
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2001 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-22 12:36:47 +00:00
peabody124
098b2fd693 Flight/System: Double heart rate when system is armed. This is per request in
IRC, but suggestions are welcome.  In the long run we probably need a sensible
way of embedding some information in the LED but it's not obvious to me.  Also
could have done with callback - sue me. ;)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1997 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-20 05:31:24 +00:00
corvus
50574841bd Moved non primary Stabilization modules into Branches
simple		- outdated - won't compile
Experimental	- outdated - won't compile
les		- development version - not stable
les+corvus	- development version - not stable




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1993 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-19 19:12:37 +00:00
corvus
8cb04a372f Stabilization: new stabilization variant based on les stabilization module, with several options for coordinate system transformation
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1990 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-18 14:46:45 +00:00
edouard
82b702e239 Added the new Multirotor shapes to the SystemSettings object, as discussed on the forums. UID has not changed, but you should recompile still (sorry).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1972 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 14:15:47 +00:00
les
2125e2479d Added AHRS boot loader SPI protocol
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1965 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-16 17:54:00 +00:00
cwabbott
dff66607c7 More UAVObject fixes, stuff to get PiOS.win32 compiling again.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1962 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-16 12:15:47 +00:00
les
6d6ec37474 Manual control: Changed 'Position' stabilization mode to 'Attitude'
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1944 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-11 17:58:11 +00:00
peabody124
dc10998152 Flight/Stabilization: Make any throttle < 0 reset the pid integral windup
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1933 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 00:46:06 +00:00
peabody124
5f601bf5ab Flight/Guidance: Enable for any type of quad airframe
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1932 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 00:46:04 +00:00
peabody124
ea85e98d7a Flight/Stabilization: Move update time storage to before the set to make sure
it goes

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1922 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-08 15:38:28 +00:00
peabody124
8308e4a4fe Whitespace change: get rid of CR
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1921 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-08 15:38:26 +00:00
peabody124
4e6f100ae5 Flight: Swap to Les' code for main line
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1920 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-08 15:38:23 +00:00
edouard
85aeffed9a Removed example settings from OpenPilot flight SW makefile too..
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1914 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-07 17:42:59 +00:00
peabody124
c4cb494a22 UAVOBjects: Just ran object genearator to get things compiling again
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1913 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-07 13:09:35 +00:00
darkz
6b8aba07b1 Updated Makefile.posix to reflect the removal of example code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1907 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-07 02:50:12 +00:00
edouard
5c48c29612 Remove example objects from the flight code, not needed anymore
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1905 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 21:50:57 +00:00
peabody124
dea5c91646 AHRSCalibration: Make default values correct now Les extended
uavobjectgenerator to support multiple fields (thanks Les!).  Also
changed default scale on mag to +/-6g

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1899 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 14:26:42 +00:00
peabody124
66bf9d53d4 AHRS: Paramaterize the variance used for the indoor algorithm.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1898 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 14:26:40 +00:00
kokomojoe
946283d67e OP-185 Flight - Added FirmwareIAP to the module load list in makefile, added uavobjectsinit.c with firmware IAP init calls
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1896 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 05:30:48 +00:00
kokomojoe
7cf0e9ba31 OP-185 Flight support for firmware IAP object. added the pios_iap.c and firmwareiapobj.c
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1895 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 02:58:07 +00:00
kokomojoe
6499da40e3 OP-185 Flight Added init function for PIOS_IAP helper functions.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1892 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 02:07:11 +00:00
kokomojoe
2fe266650f OP-185 Flight - support files for Firmware IAP object
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1891 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 02:06:13 +00:00
les
7ddb0f6f80 Stabilization: Changed to new switch format. Both position and rate modes work.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1886 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-05 14:51:33 +00:00
les
1e26ca11ee Manual control: Added some extra room at throttle zero when detecting a faulty signal
Before, moving your throttle trim slightly could cause ManualControl to think the receiver was not connected

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1885 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-05 14:50:03 +00:00
les
b2c81aceee Actuator: Fixed motors not going to min throttle in failsafe.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1884 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-05 14:47:48 +00:00
peabody124
ba3ecada1d Flight/ManualControl: Implemented settings to change what the Mode switch does
so it can also change parameters of Stabilization.  Please check your aircraft
behavior with this patch, but default behavior should be unchanged.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1878 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 19:48:09 +00:00
peabody124
f03669733b Flight/Guidance: Merge back into one task because memory requirements of a task
exceed CPU requirements of PID.  Also add add lesstabilization UAVObject to Makefile
to fix compile errors.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1870 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 02:01:34 +00:00
peabody124
d71e9df8c5 Flight/UAVObjects: Add a few files that were missed earlier, and get posix
worlking again

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1869 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 02:01:31 +00:00
les
05a85c8c95 New stabilization module based on PI-P algorithm used in FlightOS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1864 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 20:39:23 +00:00
cwabbott
8d1a99ae15 PiOS.win32: Updated PiOS.win32 makefile for recent UAVObject changes, and also updated the experimental stabilization code to comply with recent changes to the simple code. Nobody uses SiTL anymore :( .
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1858 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 18:59:58 +00:00
les
11cf24a312 Actuator: Fixed uninitialised variables
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1857 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 18:37:07 +00:00
peabody124
a9495e2cbb UAVObjects/AttitudeSettings: Remove unused object, moving data to AHRSettings.
Added attitude bias to AHRSSettings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1855 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 18:14:34 +00:00
peabody124
754200f9cf UAVObjects/Delete old VTOLSettings object
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1854 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 18:14:27 +00:00
edouard
eeb5eab177 Flight/Stabilization: fix for -180/+180 yaw transition which caused glitches in the stab module.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1853 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 16:43:10 +00:00
peabody124
5c9b5f4a99 AHRS: Get calibration working again
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1842 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 03:10:04 +00:00
peabody124
0c30101f54 AHRS: Made an object setting to allow the downsampling rate to be changed on the
fly (EKF rate up to a limit).  Also, now the algorithm selects if you are
indoor or outdoor as well as if you use a mag indoor (if you do set the z
variance higher than it calibrates to).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1841 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 03:10:01 +00:00
peabody124
29b087703b Flight/AHRSComms: Decrease stack size, not needed to be that big. Also made
ActuatorDesired dT in ms like the uavobject indicates

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1839 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:32 +00:00
peabody124
6d39d85b8f UAVObjects/AHRSStatus: Remove unused fields
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1838 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:29 +00:00
peabody124
2050864e59 UAVObjects/VTOLStatus: Remove unused object. Also added update time to
indicate stabilization loop time.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1837 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:26 +00:00
peabody124
0fd9fda7a6 Flight/AHRS Comms: Whitespace fixes
gnuindent -npro -kr -i8 -ts8 -sob -ss -ncs -cp1 -il0 -hnl -l150

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1836 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:22 +00:00
peabody124
ea3fb03c7f Flight/AHRS Communications: Switch to Les' very nice UAVObject communication
scheme

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1835 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:18 +00:00
peabody124
2a93f35807 UAVObjects/MixerSettings: Have values as int8, don't need float resolution
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1832 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 20:28:14 +00:00
les
b2d56ca34c AHRS: Added UAVObject based SPI communication between AHRS and OP.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1830 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 17:31:13 +00:00
edouard
d2c1014e29 Re-enabled yaw stabilization after SystemSettings changed. There might be a lingering issue when the
yaw angle crosses the zero-360 mark, beware.
You can disable yaw stabilization by setting all PID gains to zero for yaw.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1828 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 16:26:43 +00:00
peabody124
d54c6bf0f8 Flight/Actuator: Use dT in seconds. Forgot to change MaxAccel.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1825 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 14:37:03 +00:00
peabody124
0dfdad4fc4 Flight/Actuator: Reset critical alarm
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1824 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 14:09:14 +00:00
peabody124
c076a695ce UAVObjects/ActuatorSettings: Default values are all 1000 now so that an
unconfigured motor can't turn on.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1823 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 13:45:26 +00:00
peabody124
9f4e3906e3 Flight/Actuator: Made it use the detected dT for the feedforward computation
and removed the unused field from actuator settings (old setting time and all
the aircraft specific stuff).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1820 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 12:33:33 +00:00
peabody124
2dc40d11a1 Flight/Stabilization: Use the system clock to determine time from previous
update since now drive by events.  This means StabilizationSettings object
changing so write down your settings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1819 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 12:33:29 +00:00
peabody124
4461aba6d6 Flight/Stabilization: Move to object event system. Latency from ahrs_comm
update to actuator update now ~0.7 ms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1818 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 12:33:26 +00:00
peabody124
b9943645e0 Flight/Actuator: Run actuator from queue again, latency well behaved.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1817 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 12:33:20 +00:00
sambas
ee4ca7b93a OP-177 Flight: All alarms fixed, AHRSComms stack size made critical stack alarm, event warning caused by queue that is not used at the moment.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1801 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 19:06:35 +00:00
peabody124
a4e0ee5fdf Flight/Actuator: Move Les' actuator to the active one
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1800 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 18:51:36 +00:00
peabody124
2f6f76d578 Flight/Actuator: Remove old mixer code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1799 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 18:51:34 +00:00
fredericg
f090b4bcf8 OP-174 ET OSD: Fixed build errors due to UABObject changes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1786 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 19:56:25 +00:00
peabody124
9b1d258a94 Flight/Les/Actuator: Space->Tab, somehow slipped passed previous patch
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1784 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 17:30:42 +00:00
peabody124
aa42256ad1 Flight/Stabilization: Convert all PID loops to units of seconds instead of ms.
THIS MEANS YOU MUST RETUNE YOUR PID LOOP IF YOU'RE FLYING WITH IT

Alternatively divide Kd by 1000 and multiply Ki by 1000

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1782 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 09:04:43 +00:00
peabody124
fef8cca5b6 Flight/Posix: Get compiling again (sorry Corvus, I think I messed up your
change earlier)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1778 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 07:28:48 +00:00
peabody124
6d0df704a7 Flight/Modules: Corrected code to use tabs
find ./flight/OpenPilot/Modules/ \! \( -name '*~' -a -prune \) -type f    |
xargs -I{} bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss
-ncs -cp1 -il0 -hnl -l150 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1776 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 07:28:34 +00:00
peabody124
b85e322206 Flight/FlightSituation: Remove unused module
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1774 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 07:28:21 +00:00
peabody124
da583e0914 Flight/Guidance: Disable by default
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1768 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 03:07:40 +00:00
peabody124
8475a68958 Flight/Stabilization: Keep command and error in deg/s for rate stabilization
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1766 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 03:06:54 +00:00
peabody124
77b68e5169 Flight/Guidance: Initial template for guidance module
Flight: Create PositionDesired (the active waypoint) UAVObject and make the FlightSituationActual no update since it not used.
Flight: New velocity desired object that passes information between the look computing the desired velocity and the PID loop to get it (updated at different rates)
UAVObjects/PositionActual: Remove unused GPS fields
UAVObjects/PositionActual VelocityActual: Split the velocity into a separate object.  ALso make sure all the information telemetered around is in cm to avoid using floats.
UAVObject/GuidanceSettings: New guidance settings object for the guidance module
Flight/Posix: Add the new objects to the Posix sim
Flight/Guidance: Computes a desired velocity based on position error than runs a PID loop to control roll and pitch to achieve that velocity.  All distances are in cm, and updated the PositionActual fields to reflect this and use int32.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1760 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 03:06:27 +00:00
zedamota
9b05282be5 OP-21/Flight Bootloader - should make things cross platform.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1758 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 00:39:01 +00:00
peabody124
a01783b2a8 OP-140 AHRS: Explicilty deal with if it is initialized or not, use that to
determine retransmitting calibration, home location and such.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1755 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 21:05:38 +00:00
peabody124
9b28f2d72c OP-167 OP-157 AHRS/Calibration: Added mag scale and really cleaned up calibration.
Calibration should take less time now too (using second moments to estimate
variance in one pass).  Now need to change to multiple messages to get the
calibration in to keep the request message size minimal.  Also currently
running sensor calibrate doesn't store the gyro bias so if you want to use this
you'll have to tweak it manually.  I'll fix that step tomorrow.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1741 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 09:20:38 +00:00
edouard
eedf85a5ac OP-138 Start of the new Mixer configuration interface, for fixed wing only. This does not work yet, takes a long time to fully implement.
The system settings UAVObject is updated, you will have to recompile your firmware. If you want to take a look and let me know, please do!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1737 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-24 20:39:37 +00:00
corvus
1472b342c1 1.0 Featur Freeze -
Removing some Experimental and Incomplete Modules and their UAVObjects not suited for 1.0
- they will be moved into an experimental branch:

Navigation     : experimental code only
FlightSituation: experimental code only 
Guidance       : preliminary draft - possibly to be replaced by peabody124 position hold code if finished in time.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1729 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-23 22:05:03 +00:00
corvus
e44045f422 OP-165 : Guidance Module
Creating GuidanceModule together with PositionDesired UAVObject (as discussed),
so dschin and me can work on it :-)
Will compile and (on sim_posix) execute, but PID logic is yet untested and preliminary.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1722 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-22 22:16:48 +00:00
les
ef7ee86d45 Mixer: zero throttle shuts off motors and changed MixernMatrix to MixernVector
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1710 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 19:31:17 +00:00
chebuzz
862e35def1 OP/PiOS.posix - Somebody added UAVObjects but did not add them to the posix sim
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1702 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 14:16:14 +00:00
peabody124
f96654ace1 Adding mixerstatus/mixersetting uavobject files that were missed
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1701 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 07:08:51 +00:00
les
875437f483 Added matrix based actuator mixing. Note the makefile is set to use the original actuator code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1698 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-20 19:27:08 +00:00
zedamota
3ba6372dc4 OP-21/Flight Bootloader - Clean up and linker files for the AHRS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1691 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-19 18:27:53 +00:00
peabody124
11f2b1a8dc Flight/Stabilization: Dont cap error at maximum stabilization value - that is to scale control throws. Create another variable if we want this.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1676 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-17 18:15:02 +00:00
andrew
da1a762072 Added basic code for Yaw stabilisation in manual mode for Helis.
This is functionally the same as having a heading hold gyro in hardware.
Code is copied from the simple stabilisation routine and is a bit rough at the minute, but initial testing looks good.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1670 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-17 05:52:34 +00:00
peabody124
41b7a99883 Flight/Stabilization: Yaw rate stabilization error should be normalized by dt
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1669 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-17 02:00:55 +00:00
zedamota
e8d6e7c557 Flight - Centralized board specific files, BL and User FW uses the same board definitions, no need to have 2.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1663 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 19:19:38 +00:00
peabody124
3b015b41c5 Flight: Got a much nicer arming/disarming system going. Made it a separate flag in the end to allow testing the stabilization code with motors not running. Also changes maxRoll/maxPitch/maxYaw to uint8 to keep object size smaller - no reason for float precision for this.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1660 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 15:41:11 +00:00
peabody124
a6e71177e4 AHRS: Yaw stabilization now supports rate stabilization or heading hold. Also need to cleanly support rate stabilization on all the other axis. Les suggested this be in manual mode which will require changing the logic somewhat (essentially for vtol it will always be running through the Stabilization module) in an aircraft dependent manner. An alternative would be a stabilization flag indicating to do full attitude hold, attitude + yaw stabilization, or all axis gyro stabilization. This would be my preference.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1659 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 15:41:08 +00:00
peabody124
0b8756d55c OP-148 AHRS/Comms: For now don't retransmit calibration after comms glitch as this re-zeros gyro bias and makes attitude stutter. Need to explicitly communicate when comms glitches and query if AHRS actually rebooted.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1654 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 05:26:12 +00:00
peabody124
885c966e53 AHRS: Added a tracker for number of ADC updates the EKF misses. Also updated the Telemetry autogenerated files to accomodate the 11500 baud rate.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1652 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 02:59:00 +00:00
peabody124
19e80da928 AHRS: Update UAVObject with information about AHRS rate
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1650 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 01:54:21 +00:00
pip
73c8194acc Added PIOS_COM_TELEM_BAUDRATE, PIOS_COM_GPS_BAUDRATE, PIOS_COM_AUX_BAUDRATE & PIOS_COM_SPEKTRUM_BAUDRATE defines in pios_board.h with '#if defines' in pios_board.c for easier baudrate changing.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1644 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:18:38 +00:00
pip
22b9b2512e Added a 115200 baud telemetry option to the OP main board/UAVTalk.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1632 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:43:42 +00:00
stac
ac6989fbeb bmp085: fix configuration of EOC interrupt
The EOC EXTI interrupt configuration was incorrectly
pointing at GPIOG pin 8 rather than GPIOC pin 15.
This was preventing the EOC interrupt from working
properly.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1626 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:59 +00:00
chebuzz
3b5b129445 Fix POSIX simulator to work with new VTOL UAVObjects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1607 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-13 14:00:53 +00:00
peabody124
47a7b8548b Flight: Safety feature for VTOL. Don't enable motor until throttle brought above .5 then below or to zero.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1604 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 22:18:21 +00:00
peabody124
e90e714c2b Flight: Tweaked the throttle handling and VTOL use of it to make sure engines can be shut off easily in stabilization mode.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1593 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:49 +00:00
peabody124
5d1ebf76ea Flight/VTOLmixer: Fix bug in mixer that messed up roll mixing. Also changed minimum to -1 so that neutral can be position motors come on and -1 the off position. Also made failsafe throttle value -1 to be consistent.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1591 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:44 +00:00
peabody124
c376711405 Flight/Stabilization: Make the derivative account for the sampling time (dAngle/dt) for the PID loop since integral does and also make the integral bounds uavobject settings. It was originally bounded by constant/Ki but I'm not sure why as you change the gain of the error integral you also want to decrease the maximum error it can cause.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1590 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:41 +00:00
peabody124
8999355327 Flight: Made actuator a periodic task. I don't think the queue is low enough latency - should figure out how to make this happen as callback is the right way to go.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1589 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:38 +00:00
peabody124
dceb20b16d Flight: VTOLStatus object that returns the thrusts on all the engines
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1588 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:34 +00:00
peabody124
bba3b0c64a Flight: VTOLSetings object to contain the mixer settings for VTOL crafts
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1587 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:30 +00:00
stac
93ef510946 ahrscomms: use relative delays to avoid slipping
Change from using vTaskDelay to using vTaskDelayUntil to
ensure that we're trying to stay periodic rather than
just waiting a fixed amount of time after each loop of
processing.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1580 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-11 23:06:22 +00:00
peabody124
e260077247 Flight/ManualControl: Making failsafe test (which must explicitly look at receiver inputs instead of throttle values in case of reversal) also consider readonly flag to detect GCS control.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1545 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-06 02:58:41 +00:00
peabody124
61854ac6ab Flight: Support for quadcoptors. The format of this control will change to support octo's and more flexible tuning.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1544 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-06 02:58:39 +00:00
stac
95595664c3 telemetry: fix comments around #ifdef
No functional changes.

The closing comment on some of the USB_HID related
ifdefs was outdated.  Fixed.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1541 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-05 23:10:34 +00:00
peabody124
f9a0b799a2 Foolishly forgot object like I always do
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1529 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 22:01:11 +00:00
peabody124
d3b677298c Flight/ManualControl: Added a hysteresis loop to the manual control connection/disconnection status. I seem to get glitching without it - probably because of the receiver catching noise. It still occasionally glitches but I don't want to make it longer. Probably should be an adjustable setting.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1527 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 17:08:04 +00:00
peabody124
c21d058110 Flight: Added ability to use a third accessory input. Currently using that to select tuning roll/pitch bias and PID tuning. I also _STRONGLY_ recommend if you enable these accessory channels (and thus these features) you make the saved meta data for the StabilizationSettings and AttitudeSettings read-only, so only on flights where you mean to can you change these settings. I'm also not convinced about the interface - it seems like flicking TX switches to get into adjustments is a recipe for disaster. Probably need to just control through GCS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1526 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 17:08:02 +00:00
peabody124
45e8131a30 Flight: Added ability to use additional TX inputs to tune attitude bias. Note this form of the calibration is temporary and will likely be replaced by a rotation matrix to deal with more general rotations.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1525 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 17:07:59 +00:00
peabody124
8dbc382e5b Ground/CoordinateConversions: Shows correct location now. I just typed in a 3.14 constants and forgot to change to M_PI.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1520 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 05:58:43 +00:00
peabody124
b4ff14b725 Ground/GCSControl: Swapped sign conventions of sticks to match the sign convention of roll/pitch/yaw. I.e. now right on the roll causes a + roll, pulling down on the pitch causes + pitch.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1518 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 02:19:06 +00:00
peabody124
a406034ed9 OP-132 Flight/AHRS: Changed the heuristics regarding GPS quality and INSGPS updates. Now if satellites < 7 or PDOP > 3.5 it does not perform GPS updates. Professor is working on some code to fix parts of the covariance matrix. If indoor updates high a 0 position and velocity and high variance.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1515 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 02:19:00 +00:00
cwabbott
d7a3ffb464 flight/PiOS.win32: update Makefile.win32 with new UAVObjects, also change UAVObject headers to have a newline at the end.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1510 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-02 23:55:24 +00:00
peabody124
d3bb821e82 Flight/ManualControl: Change to ManualControl module to make warning only kick in if input is less than the max and min for throttle. Disable going to (unimplemented) auto mode. Commiting based on one yay and no nay.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1505 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-02 16:33:02 +00:00
peabody124
ec7d059de8 Posix: Corrected makefile after UAVObjects mashup
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1489 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-31 17:21:44 +00:00
peabody124
12657440c3 OP-132 AHRS: Added an indoor flight mode and also add an ad-hoc quality heuristic to the GPS signal to increase the measurement variance from GPS when fix quality is poor or when in indoor flight mode. In addition corrected the indentation to conform to the tab/space convention forum discussion.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1474 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-31 02:11:09 +00:00
andrew
65dc5e9b04 Yaw stabilisation for the simple algorithm was calculating the error and not taking into account that 350º error is the same as -10º error.
The resultant error could range from -360º -> +360º
Since this is only used for Helicopters / multi rotors, and the aircraft can rotate in any direction, I added the modulo logic so that it is now from -180º -> +180º this should now take quickest path to correct the error.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1464 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-30 01:20:43 +00:00
andrew
3c6d9d6976 manual control was mapping tx input as -180º -> 180º for AttitudeDesired.Yaw.
The Wiki (http://wiki.openpilot.org/Unit_Standards) states this should be 0 - 360º
Made the code match the wiki.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1463 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-30 01:16:00 +00:00
peabody124
f202884ce8 AHRS: Numerous changes. Added CPU load monitoring for AHRS as well as some friendly debugging output options. Also added a new CalibrationMode setting to AHRS (Echo) to speed up sensor calibration. Cleaned up the 6 point calibration interface to make it more friendly, but I think Edouard will clobber it with something nice and sexy :).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1455 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-29 06:38:30 +00:00
stac
ecac1fb79d nmea: parse GSV sentences and populate GPSSatellites object
This creates a new UAVObject called GPSSatellites to hold
information about which satellites the GPS receiver can see
and the quality of their signals.

NMEA GSV sentences are now parsed.  The full set of GSV data
may be split across multiple GSV sentences, each containing
info for at most 4 satellites.  Once an entire set of GSV
records has been collected, the GPSSatellites UAVObject is
updated.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1453 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-29 01:46:14 +00:00
stac
2ead641136 nmea: minor bug fixes and robustness improvements
Remove asserts on bad data, only assert on coding errors.
Remove unnecessary inline qualifier to reduce code size.
Handle more lat/lon precisions in conversion to fixed-point.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1452 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-29 01:46:11 +00:00
stac
679f59f19d uavobjectparser: fix alignment of field init in generated code
Change from spaces to <TAB> to match the formatting in
the template.  No functional changes, just whitespace.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1451 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-29 01:46:09 +00:00
peabody124
8128c3bbfa OP-118 AHRS: Added 6 point calibration routine to AHRS config widget. To use it, click "Cal Mode", then place the AHRS on each of 6 sides of a cube then click save position. Finally click compute to push the updated scale abd bias terms to the AHRS. Also fixed a bug in UAVObjectField that would not allow you to setDouble for extra fields.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1449 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-28 18:48:51 +00:00
andrew
3530428982 Fixed the bounding of servo outputs for the case when max < min
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1444 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-28 05:11:19 +00:00
peabody124
00cad250ea Adding gpstime.h for flight.
Seriously - I'm sorry I missed all these files.  I suck.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1443 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-28 00:58:04 +00:00
peabody124
ced0a4b952 AHRS: Fixed silly bug that made the default mag variance be zero - explains "hopping around" default behavior. Still should run calibration though.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1439 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 21:05:41 +00:00
peabody124
5f9289f0c0 Flight: Keep getting WMM memory usage down
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1438 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 21:05:38 +00:00
peabody124
16361dea12 AHRS: Making AHRS populate the NED/Vel fields of PositionActual. May rename object to PositionVelocityActual. Also created a GPSTime object which is populated from the GPRMC command. Also added a GPZDA parsing command, but by default OP GPS doesn't send this command. Made the computation of the world magnetic model use the current time to set the magnetic vector. Note: currently if you set your home location and save it to SD, this will not recompute the vector over time. I'm not sure how sensitive this is.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1435 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 19:59:25 +00:00
stac
24a4c6b791 gps: Update GPSPosition instead of PositionActual
GPS module now updates GPSPosition UAVObject
rather than the PositionActual object.  The
GPSPosition object is intended to be consumed
only by the AHRS.  The AHRS will use this (and
other inputs) to compute a filtered version of
the position in the PositionActual object.

This commit will cause temporary breakage of the
GPS functionality in the GCS until the PositionActual
object is properly updated by the AHRS.  Most of the
GCS should continue to use PositionActual.  The only
exception to this might be any tool for specifically
visualizing the raw GPS state.

GPS.c is now only responsible for receiving a
complete NMEA sentence from the COM interface.

NMEA parsing is now factored out into NMEA.[ch]
which is where GPSPosition is now updated based
on the complete NMEA sentences obtained from the
GPS.

Latitude and Longitude are now encoded in a
fixed-point notation in units of degrees x 10^-7
to prevent truncation of precision due to encoding
into a float.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1431 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 02:15:00 +00:00
stac
47df1faa8d ahrs: whitespace adjustments
No functional changes.  Whitespace/tab fixups only.
Use TRUE/FALSE instead of 1/0.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1430 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 02:14:58 +00:00
peabody124
a0b21bef45 Flight: Got read only check working for UAVObjects and modified the ManualControl Module to use it. Edouard - please check over this.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1427 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 00:15:48 +00:00
peabody124
a8df6e2c4d OP-128 Flight Documentation: Added description to all the UAVObject (now mandatory) and changed the parser to populate this information into the autogenerated files. Also added a function to test if an object is read only for flight.
Since there are a lot of autogenerated changes the important ones are:

  flight/OpenPilot/UAVObjects/inc/uavobjecttemplate.h - added description and define to make the ObjectReadOnly query
  flight/OpenPilot/UAVObjects/uavobjecttemplate.c

  flight/OpenPilot/UAVObjects/uavobjectmanager.c - added the UAVObjReadOnly query

  ground/src/libs/uavobjgenerator/uavobjectparser.cpp - added parsing of description field

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1425 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 00:15:42 +00:00
andrew
2361af19fb First attempt at ccpm mixing for single rotor helicopter.
This has throttle and pitch curves implemented and can be configured for many swashplate configurations.

This has flown a 450 clone (with training wheels) and the ccpm worked well.

Still need to neaten up some stuff and work out how to implement yaw stabilisation in manual mode.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1412 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-26 06:00:57 +00:00
peabody124
4ca10e92c7 OP-121 OP-122 Flight: Improved USB HID communication.
1. Added reenumeration function and call it on USB init (device will appear after reprogramming now)
  2. Moved buffer.c to general flight/Libraries location
  3. Removed the 62 byte transmission limitation by adding a transmission buffer
  4. Sped up USB communication by increasing endpoint polling frequency

Note, that the nonblocking and blocking USB send functions are not blocking entirely correcting.  The blocking calls the nonblocking, and the nonblocking blocks until the last chunk has started tranmission if it's a big transmission.  The buffering I added would generalize to non-blocking nicely, but would require using the EP1(IN) callback to handle most of the tranmission.  This creates a lot of issues if one function is pushing data onto the buffer and the interrupt is sending.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1403 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-25 05:32:52 +00:00
andrew
b467b419e6 OP-103, UAVObject update.
Adding settings for configuring CCPM mixing for Helicopters to ActuatorSettings and SystemSettings UAVObjects.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1402 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-25 00:55:15 +00:00
peabody124
2db294caf7 OP-125 Flight: Changed GPS stack size to a bit closer to what the internal model needs to get rid of out of memory warning, but it could still use 1k less if it pulled all the constants from flash when needed and computed the time difference when called. Also changed ManualControl so it checks the active control values to determine the warning, so if GCS is controlling the warning light goes out.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1387 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 06:03:19 +00:00
peabody124
e94d3d3846 AHRS/Flight: Allow selecting simple algorithm as well as INSGPS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1384 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 03:51:08 +00:00
peabody124
bd8fffe4d0 AHRS/Flight: Renamed AttitudeSettings to AhrsSettings to make it more intuitive. Added the ability to change the algorithm from GCS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1383 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 03:39:13 +00:00
peabody124
b32184d1ec OP-119 Flight: Converted HomeLocation object to use cm for the home base instead of floating point.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1382 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 02:49:53 +00:00
peabody124
2596f43511 OP-120 AHRS: Moved conversion of quaternion to RPY over from AHRS to OP to minimize transfer and computational load on AHRS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1381 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 02:35:39 +00:00
peabody124
0d11493337 Flight: Added mixer settings for elevon. Also added bound checking on servo outputs which becomes important when multiple things are mixed and you want to use the full range.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1380 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 01:54:58 +00:00
cwabbott
19f6db79be Added ManualControl to the win32 and posix makefiles. Also fixed a compiler error about "No newline at end of file."
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1379 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 00:52:56 +00:00
peabody124
2e705e6836 OP-116 AHRS: Made data going to the AHRS in NED format. Once the final estimate object is created I'll repeat the same calculation to populate it, although we want to avoid going back to LLA format on the OP because the CPU requirements are excessive.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1376 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 19:01:36 +00:00
zedamota
6adc834d9b OP-21/Flight Prep work for the USB HID bootloader
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1375 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 18:57:29 +00:00
zedamota
2daa229a2d OP-21/Flight Prep work for the USB HID bootloader
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1374 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 18:56:00 +00:00
peabody124
60332efec0 OP-118 AHRS: Missed the auto generated files for the default values. Also no idea why last patch changed navigationsettings - either make uavobjects does differently on different platforms or someone forgot to run make uavobjects.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1372 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 17:02:12 +00:00
peabody124
0862d64b8c OP-118 AHRS: Made default calibration values friendly for people. Also fixed bug that would repeatedly trigger calibration when it was requested.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1371 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 16:43:00 +00:00
sambas
7859a130e8 Fixed bug that caused Object Browser to crash
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1369 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 08:59:18 +00:00
cwabbott
e27adf700b Fix posix and win32 makefiles for recent UAVObject changes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1367 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 00:59:12 +00:00
peabody124
5662d85c4e OP-120 AHRS: Tightened up the communication protocol so it runs more quickly. Looks ok in gdb but GCS not crashing right now (rendering error) so I can't test it properly.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1366 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 00:21:54 +00:00
peabody124
8897c441fa OP-118 AHRS: Added AHRSCalibration object and messages associated with that to AHRS. Also made AHRS run calibration only when requested. We will create a GCS plugin that runs through computing the calibration settings. To compute the variances on the AHRS set the measure variances to true, wait ten seconds, then set it to false to read it back.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1363 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 21:46:02 +00:00
stac
635df28c34 GPSPosition: Add new UAVObject for GPSPosition
This object is not yet populated or used.  This
will soon hold the raw position data from the GPS
receiver.  PositionActual will be converted to
hold the computed position from the AHRS.

Contents of this object are still subject to change.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1355 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:18 +00:00
stac
a960d6e1b1 GPS: fix typo desimal->decimal throughout
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1352 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:12 +00:00
stac
7b2111e512 baroaltitude: rename AltitudeActual to BaroAltitude
This is to align the object names to matches the UAVObject
architecture doc.  No functional changes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1351 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:10 +00:00
peabody124
ba4dc14cea OP-124 Flight: Added fields to the AHRSStatus to track failures of each of the SPI message types.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1347 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 09:21:39 +00:00
peabody124
bb79ba66fa OP-119 AHRS: Converted the big data structures for the WMM calculation to be allocated on the stack, which forced a dependency on FreeRTOS :-( but keeps things on the heap. Also changed the HomeLocation object to include a Set field. When this is false, OP will try and update it whenever it gets a 3D fix. If it is saved to disk with this field as true, then it won't need to get a lock to send the magnetic flux vector to the AHRS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1346 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 08:35:44 +00:00
peabody124
4b0a0236d8 OP-119 AHRS: Increased GPS stack size to allow WWM to not overwrite other memory. In addition converted all the calls to use pointers so I will switch to using pvPortMalloc vPortFree to get it off the stack entirely. Now correctly computing flux for me and running.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1345 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 08:35:41 +00:00
peabody124
2031cfe4d0 OP-119 AHRS: Added error counters for the messages as well as changed an error on AHRS echo back for the HomeLocation message.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1344 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-20 22:52:13 +00:00
peabody124
86766ecc14 OP-119 AHRS: Removed WMM computation for now because it was triggering a reset (probably not watchdog) which is weird - it worked on AHRS. Maybe running out of memory? Also added the break on comm error in ahrs_comms to resync with it. I think the message to send the home location is also not working right now. Fixed chip reset.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1340 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-20 14:48:02 +00:00
peabody124
ef0b307353 [OP-119] Flight/AHRS: Created a HomeLocation object which is updated when the GPS gets an initial 3D fix and populated with the information to convert from LLA from the GPS to NED reference frame. Also added a message for passing the MagneticNorth vector to the AHRS and removed that computation from AHRS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1337 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-19 20:38:27 +00:00
FredericG
fd986f3437 OP-90 Configuring the ET OSD without eLogger. The module can now read a opaque config-file from the SD-card card and send it to the OSD
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1336 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-19 17:32:18 +00:00
peabody124
3c4def13cc AHRS: Added message to pass GPS information into AHRS from OP. This is then converted
into NED reference frame and used in the INSGPS algorithm, although currently this
information isn't propagated back to OP.  Data structures related to the GPS position
into the algorithm and the position estimate out will likely be in flux.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1334 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-19 05:18:34 +00:00
peabody124
8bcff21184 Flight: Made the actuator module perform a get after set to allow configuration module to override servo position.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1329 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 20:47:36 +00:00
FredericG
0b9079e277 ET OSD: removed existing debug and config code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1327 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 19:15:43 +00:00
peabody124
cfd20922cd AHRS: Added the filtered data to the attitude raw object. Even though this seems like an oxymoron it's still raw to the EKF algorithm, and nice to see the real values after filtering to make sure nothing weird is going on. However, if people don't like this I'm open to suggestions/patches. I'd maybe suggest the whole attituderaw object be converted to ahrsraw anyway since it's more like that (eg. none of the values are actually attitude estimates).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1325 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 14:54:24 +00:00
peabody124
fda6fc8371 Merge branch 'mac_support'
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1324 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 14:29:53 +00:00
FredericG
b46bc68e96 "addr" field of I2C transaction struct now takes real I2C address, and not address that is pre-shifted to accommodate the R/W bit
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1321 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 10:04:55 +00:00
FredericG
be2f5bbf70 ET OSD: Adapt to new I2C API
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1316 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 09:31:54 +00:00
stac
3125ecfc4e AHRSComms: altitude sensor data is now sent to AHRS
Altitude/pressure sensor data is sent to the AHRS whenever
the AltitudeActual object is updated.

Altitude, Pressure and Temperature are sent as floats.
Same as in the UAVObject that goes to the GCS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1291 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 01:02:13 +00:00
stac
c3e509c2cb attituderaw: Replace HeadingActual with AttitudeRaw
AttitudeRaw now includes:
 - magnetometers XYZ (in mG)
 - gyros XYZ (raw ADC samples)
 - accelerometers XYZ (raw ADC samples)
 - placeholder for gyro temp sensors (read as zero for now)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1289 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 23:42:14 +00:00
stac
5d635d4233 uavobjects: regenerate existing uavobjects
No functional change, uavobjects were not regenerated since last
change to the object generator.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1288 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 23:42:07 +00:00
peabody124
a084d21804 Merge branch 'watchdog'
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1281 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-13 05:18:17 +00:00
cwabbott
c1cf1ec71b PiOS/Win32: Most stable version of port.c so far. Changed Makefile.win32 to use mingw32-gcc to avoid conflicts.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1278 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-12 14:32:52 +00:00
stac
f74c6ffdd5 i2c: rewrite i2c layer
The STM32 I2C block has a number of errata associated with it.
These errata are primarily related to timing sensitivities between
the peripheral and the interrupt handler.  In particular, the
correct generation of the stop bit relies on the I2C IRQ running
immediately and not being held off for any reason.

NOTE: The I2C interrupts must be the highest priority IRQs in the
      system to ensure correct operation.

I2C protocol is now implemented as a formal state machine.
See: stm32_i2c_fsm.{dot,jpg} for FSM description.

I2C init is now expressed by const initializers in pios_board.c
for both OP and AHRS boards.

I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays
of an unlimited number of bus transfers to be done atomically.
The I2C adapter driver now handles all bus-level locking across the
list of transactions.  Generation of start/restart/stop conditions
are handled automatically over the list of transactions.

Timeouts have been removed from the API for now.  May be added
back later.

This driver has run error free on both the OP and AHRS boards for
up to 48hrs but it still sometimes fails earlier than that on the OP
board.  There is another possible set of improvements to the driver
that could employ the DMA engine for transfers of >= 2bytes.  This
change would reduce the timing sensitivities between the peripheral
and the driver but unfortunately, both the SPI and I2C interfaces
share the DMA1 engine.  That means only one of these two peripherals
can use the DMA engine and right now, SPI between OP and AHRS is
already using it.

Failures are currently fatal and will lock up the CPU.  This allows
useful information to be obtained in the failure cases.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:15:08 +00:00
stac
f66e2cbd86 battery: fix doxygen header info
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1239 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:56 +00:00
stac
a320a3e4d4 build: Turn modules back on
The modules were disabled for some reason in r1172.
This just turns them back on for the real targets.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1237 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:53 +00:00
peabody124
0eac218572 Small update to make ManualControl get the command after setting it. That way if the flight system isn't meant to overwrite it (i.e. flying via GCS) it uses the right value. I think this should actually be the default behavior of UAVObject set... awaiting feedback from Vassilis.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1214 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-05 19:56:36 +00:00
cwabbott
d910b8f756 slight changes to get PiOS.win32 to compile
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1205 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-04 14:21:58 +00:00
cwabbott
c2508bbb9e PiOS for win32
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1200 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-03 19:29:14 +00:00
sambas
7f6336d324 OP-22 Flight/PiOS: Spektrum reworked, input is mapped to old aux in receiver connector, works nicely with calibration plugin. Also bind works, just needs config flag to bind on powerup
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1189 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-01 10:34:07 +00:00
peabody124
47da7326e7 Damn thought I'd commited this
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1176 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-29 13:50:24 +00:00
corvus
02a78f0470 moved Vassilis stabilization module as of r1153 into Stabilization/simple
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1173 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 15:03:55 +00:00
corvus
9ad9ffd466 moved new stabilization code into experimental subdirectory
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1172 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 15:00:51 +00:00
corvus
c8486d08e4 Fixed some bugs in OpenPilot Core.
- syntax error in pios_board_posix.c introduced with Doxygen comment blocks
- platform dependant code had been added to openpilot.c instead of pios_board.c
- redundant header inclusion (stm32... already included by PiOS)


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1171 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 14:34:48 +00:00
dankers
32e6d53b23 Small comment issue that was causing build to fail
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1170 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 11:28:18 +00:00
edouard
9145a4b1a6 Doxygen work: created "OpenPilot System" group for system libraries and core files. Changed a typo on the Osd Doxygen. Let me know if you're OK with this approach.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1169 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 07:28:21 +00:00
peabody124
27bcd20882 HID working on Mac for telemetry. Need to tweak GCS code for Win/Linux
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1166 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 20:50:20 +00:00
FredericG
efaa6c910b MKSerial: also report ground-speed
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1162 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 09:49:47 +00:00
peabody124
eb41a84acf And this
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1161 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 08:09:43 +00:00
peabody124
7d7802593e Oops, sorry missed these files
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1160 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 08:08:50 +00:00
peabody124
840f7ff456 A version of the firmware that successfully Acks back and forth over HID. Still need to refine the PIOS interface and make GCS strip out the report ID data (if necessary). Also note: currently if you run too many modules the watchdog timer kicks in. I haven't determined if this is due to an interrupt binding up or what (and why it doesn't happen more often since I can't find any code that explicitly resets the WWDG).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1157 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 06:22:34 +00:00
peabody124
c46dcea73a Pretty major update of the USB HID core. Removed a lot of old code related to custom drivers and BSL (which will be brought back under HID). Device enumerates but still not communicating. Hopefully nothing broken, lots changed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1155 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 03:19:07 +00:00
corvus
2621d07574 Added UAVObjects: FlightSituationActual NavigationSettings NavigationDesired
- Added FlighSituation Module (development module for sensor fusion, mostly stub, possibly renamed later)
- Added Navigation Module (development module for navigating towards a point in space - DEVELOPMENT CODE, NOT STABLE YET (I am testing around with this)) 
- Changed Stabilization Module (uses local reference frame now. Stable except for code cleanup/review. Tested in simulator and outperforms old code.)



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1154 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-26 21:26:28 +00:00
peabody124
d928676f5e More documentation updates, standardizing format to include addtogroup at the beginning of headers so files are associated with modules
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1121 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 19:53:35 +00:00
sambas
f5c24d169e flight/osd: Parse config into setupbits and parameter slots
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1115 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 15:24:29 +00:00
peabody124
99e94228a9 More doxygen updates
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1106 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 05:31:11 +00:00
peabody124
1cd81e211f Added Doxygen comments for OpenPilot modules
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1101 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 01:02:34 +00:00
corvus
aa53b57d55 Changed the Build directory for posix port from Build/ to Build.posix/
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1090 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-14 10:08:03 +00:00
corvus
fa57e42efa Deleted OpenPilot.posix branch. Integrated portability modifications into main tree
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1086 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-13 16:23:41 +00:00
FredericG
5bb4fedc7f attitude seq field was removed
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1065 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 12:25:43 +00:00
vassilis
9f2a01a78a Flight/Servo Fix Servo driver buffer overflow, was messing up the I2C and altitude readings, now working fine. Servo index used to be 1-8 but the Servo driver was indexing a buffer out of bounds. Changed everything to use index 0-7 for servo outputs.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1061 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 01:54:43 +00:00
stac
3896baa908 usb hid: fix compiling with ALLOW_HID_TELEMETRY
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1060 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-10 14:56:27 +00:00
sambas
9003cd8eca OP-97 flight/GPS: GeoidSeparation added, need to think that precision problem
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1056 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-10 07:27:07 +00:00
stac
17bea4cb91 ahrscomms: connect the OP board to the AHRS board
The AHRS comms module now sync's with the AHRS and
exchanges interesting data periodically.  Whenever
the link to the AHRS is down, the AHRSComms alarm is
raised.

This is fairly basic for now but provides the last
piece of the infrastructure to move data back/forth
between the OP and the AHRS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1014 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:49 +00:00
stac
a3a2dbd634 spi: Add support for hardware CRC generation/checking
PIOS SPI devices may now make use of automatic CRC generation
and checking on block transfers.  Only supports CRC8 for now.

Since the SPI interface CRC calculation continues across message
boundaries (ie. not reset on every transfer), we must manually reset
the CRC registers for every transfer to allow the two sides of the
link to resynchronize.

Unfortunately, resetting the CRC registers requires disabling the
SPI peripheral which must now be done on every block transfer.

Note: The last byte of the tx buffer is never sent and is assumed to
      be a place holder for the tx CRC8.
Note: The last byte of the rx buffer is expected to hold the rx CRC8.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1011 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:42 +00:00
stac
548a32f18b attitude: Rename Attitude module to AHRSComms
The Attitude module will soon be handling updates for all UAVObjects
that require data from the AHRS.  To reflect this expansion of scope,
it has been renamed to AHRSComms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1009 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:37 +00:00
stac
1425ab1786 ahrs status: Add AhrsStatus UAVObject
This object currently only holds the serial number of the attached
AHRS board.  This will be retrieved each time communications are
(re)established with the AHRS board.

This will eventually be extended to hold some statistics for OP to
AHRS comms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1008 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:34 +00:00
stac
1bbc8381c0 heading: Add HeadingActual UAVobject
This object currently holds only the raw magnetometer readings and
an instantaneous heading calculation which are only really useful
for debugging.  The contents of this object will change often as
development progresses.

Note: The magnetometer values are often garbage due to a problem
with i2c software on the AHRS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1007 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:31 +00:00
stac
0e6294ca27 spi: remove internal pull-up from input data lines
The input data lines between the OP and AHRS boards had internal
pull-ups enabled.  This seemed to be causing issues early on
during development of the inter-board comms.  Not sure if this
is still necessary but this is how the current code was tested.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1006 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:26 +00:00
stac
89a6d6d912 ahrs spi: Add definition of OP<->AHRS SPI protocol
This defines the SPI message format as well as a few
initial messages for moving data across the link.

The v0 messages are place holders for firmware download
in the bootloader.

The v1 messages are to be used by the main application.

Note: This is not the final protocol definition.
      Subject to change without notice.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1004 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:15 +00:00
stac
3eceef43d3 spi: Connect device specific DMA IRQ handlers
Mark the device specific DMA IRQ handlers as strongly linked
aliases for the genericly named interrupt vector symbol.

Here's how this works...
 * The address of the symbol DMA1_Channel2_IRQHandler is written
   into the DMA1/Channel2 interrupt vector by the linker script.
 * The startup_*.S file specifies Default_Handler() as a weakly
   linked alias for DMA1_Channel2_IRQHandler.
 * We now override the weakly linked alias with the strongly linked
   PIOS_SPI_sdcard_irq_handler().
 * This results in the address of PIOS_SPI_sdcard_irq_handler() being
   written to the vector table for the DMA1/Channel2 interrupt.
 * The PIOS_SPI_sdcard_irq_handler() function is now called whenever
   the DMA1/Channel2 interrupt fires.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1003 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:13 +00:00
stac
b084fc4be5 alarms: Add alarm for AHRS Communications
The AHRSComms alarm will be raised whenever the OP board
is not able to communicate with the AHRS board.

The navigation software on the OP board could use this
alarm to trigger its best attempt at an emergency landing.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1002 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:11 +00:00
stac
1cc6981ee5 attitude: Remove seq field from uavobject
The sequence number field for the attitude solution is
likely unnecessary.  Removed.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1000 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:04 +00:00
sambas
1a7a9aa250 flight/osd: config write retry routine, my original empty config array.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@986 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-02 18:49:42 +00:00
sambas
aa1ddca8bf flight/osd: ET osd write config work, dump format also same as write array. use with caution
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@985 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-02 14:54:04 +00:00
dankers
e47f755c30 Minini removed from OpenPilot
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@965 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-01 08:57:06 +00:00
peabody124
6715565727 Make CODE_SOURCERY switch affect rm command
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@909 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-27 19:44:39 +00:00
FredericG
55f13788de FlightBatteryState Object : Made Voltage and Current fields float
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@895 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-26 10:59:11 +00:00
FredericG
8204143f9d MKSerial: Do not generate BatteryState as this is now generated by the battery-module
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@894 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-26 10:31:27 +00:00
FredericG
302be3ee6f OSD: Send battery-current info to OSD. Consumed mAh is calculated by the OSD
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@893 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-26 10:27:10 +00:00
vassilis
c74eb2f0e9 OP-26 Flight/Stabilization First release of stabilization module. Tested using FlightGear, default tuning is for the HITL simulation. Works fairly well but a number of improvements can be made to aid tuning. The ManualControl settings must be first set as you would normally do for HITL simulation, flight mode is changed using the mode channel.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@887 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-25 02:28:16 +00:00
FredericG
6ef11148b5 First version of battery module
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@882 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-24 11:10:43 +00:00
FredericG
6c40edccf2 ET OSD: WIP: dumping of config-blob to serial port
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@852 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-21 20:02:03 +00:00
FredericG
3bc938d45e lowered I2C timoout whne using RTOS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@842 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-21 09:19:02 +00:00
FredericG
d7390a07a5 MKSerial: use AUX port
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@840 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 18:08:41 +00:00
FredericG
fba5164634 Enable AUX UART with ENABLE_AUX_UART in Makefile
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@838 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 18:01:21 +00:00
FredericG
e5c795e42b Remapped UART_AUX from PA9/10 (RX inputs) to PB6/7 (Servo output)
Rationale: (http://forums.openpilot.org/topic/800-rev-761-mkserial-adapt-to-com-usartx-pios-com-x/page__view__findpost__p__2203_)
  

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@836 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 17:48:59 +00:00
FredericG
eac1d8a06b No need to include telemetry.h in openpilot.c
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@835 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 17:43:00 +00:00
FredericG
524201d3b6 MKSerial: Complete PositionActual Obj
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@818 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-19 11:04:49 +00:00
FredericG
ceadcf49a0 OSD: Also use PositionActual object
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@817 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-19 11:02:43 +00:00
dankers
69d2c1b546 Add flightbatterystate to the GCS, ran uavobjgenerator on all XML files. .cpp and .h included for GCS now, uncommented out these files from the uavobjects.pro.
Moving sounds folder to shared. Some sounds will be uploaded later.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@792 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-17 10:06:51 +00:00
fredericg
369657d52e FlightBatteryState object changed
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@786 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-16 13:41:10 +00:00
fredericg
23b2771602 OP makefile, traces under dos did not work well
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@785 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-16 13:38:49 +00:00
FredericG
e3815bf8b8 OSD: start displaying real data WIP
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@765 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-14 16:50:01 +00:00
vassilis
106bdca20e Flight/Actuator Go to failsafe actuator outputs when a command is not received
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@763 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-14 02:00:16 +00:00
fredericg
0731747d84 new object: FlightBatteryState
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@762 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 17:21:31 +00:00
fredericg
4e15413fc9 MkSerial, adapt to COM_USARTX => PIOS_COM_X
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@761 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 11:18:42 +00:00
stac
771a56ca9d com/usart: generalize com driver API
- Created a pluggable COM layer
- Converted COM + USART init into static initializers
  rather than typedefs
- Generalized the USB HID COM API to match the USART
  API.
- Changed USART and COM layers to be data driven rather
  than #ifdef'ing/switching on the specifics of each port

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@760 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:24:26 +00:00
stac
8d015a57d0 pios spi: support both master and slave configs
Added support for SPI slave configurations to the pios SPI layer.

Converted the board specific configuration for the PIOS SPI layer to
use const static initializers rather than #defines (see pios_board.c).

SPI interface between the OP board and the AHRS is now operational at
a basic level, capable of moving simple single byte messages between
boards.  Multi-byte, CRC protected messages will be added on top of this.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@759 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:23:44 +00:00
stac
90f9e6d309 openocd: support OP and AHRS at the same time
Split the floss-jtag.cfg file into separate versions
for OP and AHRS.

Push AHRS onto non-default ports for gdb, tcl and
telnet.

Update the AHRS gdb setup script to point at the new
gdb port.

Add (commented out) example sytax to support distinguishing
between multiple floss-jtag boards that don't have serial
numbers.  Uses the usb bus address of each device as the
selector.  See this patch posted to the openocd mailing list
for how to add this functionality to openocd:
  http://lists.berlios.de/pipermail/openocd-development/2010-June/015785.html

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@755 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:22:30 +00:00
FredericG
f8b793e54d ET OSD, WIP. Encoding of voltage and GPS data is now known
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@750 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-12 17:44:24 +00:00
fredericg
39aaf0868a MkSerial: Adapt to GpsPosition => ActualPosition
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@744 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-11 15:54:13 +00:00
vassilis
b6160c8a9b Flight/Telemetry Avoid bunching of periodic updates by spreading them.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@739 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-11 02:24:26 +00:00
vassilis
eaa9d97939 Flight/GPS Renamed GPSObject to PositionActual and implemented field for GPS status (NoGPS, NoFix, Fix2D and Fix3D)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@734 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-10 01:28:06 +00:00
FredericG
5472d531e7 Starting OSD module for ET OSD Std
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@732 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-09 20:43:43 +00:00
fredericg
e550243c13 Removed unwanted quotes in build-output when building under windows/dos
before
  "**** Compiling C :" ../PiOS/STM32F10x/pios_sys.c "->" Build/pios_sys.o
after
  **** Compiling C : ../PiOS/STM32F10x/pios_sys.c -> Build/pios_sys.o

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@731 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-09 16:38:10 +00:00
FredericG
2895925bd2 Small fixes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@726 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-07 19:56:42 +00:00
fredericg
426b4344b0 Detect if connected to NaviCtrl or FlightCtrl and use appropriate messages - untested
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@725 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-07 14:50:48 +00:00