rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-02 10:24:11 +01:00
Code Issues Releases Activity
10,373 Commits 5 Branches 8 Tags 266 MiB
7be6c16a40
Commit Graph

4584 Commits

Author SHA1 Message Date
Alessio Morale
9e1acc3165 OP-1058: fix needed for fw_revolution code compilation 2013-07-31 15:24:26 +02:00
Alessio Morale
d99790be71 OP-1058: Implement explicit item accessor for MultiElement fields. 
This implementation uses a union containing the Array implementing the MultiElement field data and a struct made from element names.
it allow to replace the following sintax:
  settings.PitchRatePID[STABILIZATIONSETTINGS_PITCHRATEPID_KP]
with a more concise and less error prone
  settings.PitchRatePID.fields.Kp
while allowing the direct array access using the notation
  settings.PitchRatePID.data[n]
 2013-07-31 15:23:43 +02:00
Oleg Semyonov
77a6db3007 Merge remote-tracking branch 'origin/os/baro-offset-lpf' into next 2013-07-30 23:41:37 +02:00
Alessio Morale
b4d2423680 OP-1048 fix CF stateestimation bug using AccelTau. 
move *_filtered to stateestimator data struct and initialize them at init.
they were previously used uninitialized thus causing estimation to fail validations, restarting the filter continously

+review OPReview
 2013-07-30 23:41:21 +02:00
Corvus Corax
5206c1f195 uncrustification 2013-07-30 22:14:36 +02:00
Brian Webb
2340f4f0d9 OP-1050: Moves LED configuration above settings erase in OPLink pios_board.c to prevent crashing when settings are erased. 2013-07-29 20:37:00 -07:00
Corvus Corax
4d9f7a72db Start CallbackScheduler last (after other modules) to reduce risk of race conditions during bootup 2013-07-28 20:31:31 +02:00
Corvus Corax
9537cac701 Merge branch 'next' into corvuscorax/callbackeventdispatcher2 2013-07-28 17:10:20 +02:00
Brian Webb
e246ecf536 Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs. 2013-07-28 07:01:08 -07:00
Richard Flay (Hyper)
c3e3521001 OP-1049: Hotfix to 13.06.02 for MPU6000 FIFO overflow on CC3D when board initialisation takes 
longer than 150ms.
 2013-07-28 01:16:22 +09:30
Oleg Semyonov
1bfa66c2b6 Change settings for baro altitude offset correction 2013-07-26 21:14:44 +02:00
Corvus Corax
ae1db5058e uncrustification 2013-07-20 16:59:00 +02:00
Corvus Corax
4f6c3c98e3 some small fixes to airspeed compensation in Stabilization 2013-07-20 14:52:22 +02:00
Corvus Corax
2ecbf4a846 add code to scale stabilization PID coefficients by 1/airspeed^2 if the user wishes to do so 2013-07-20 13:52:45 +02:00
Corvus Corax
b3cbb57a2b made low pass filter alpha a setting 2013-07-20 10:40:29 +02:00
Corvus Corax
1049f483a5 added low pass filter and a few safety checks to gps airspeed estimation 2013-07-20 09:09:44 +02:00
Corvus Corax
72e33a11e4 uncrustification, changed ekf glitch recognition to warning, since its now benign 2013-07-19 15:40:57 +02:00
Corvus Corax
b9ae8844a1 return error if ekf has not inited to prevent arming without proper state estimation 2013-07-19 15:37:50 +02:00
Corvus Corax
be583dd8bf fixes to gps airspeed sensor 2013-07-19 15:30:33 +02:00
Corvus Corax
842b4e361b moved airspeed sensor code to correct location 2013-07-19 15:29:04 +02:00
Alessio Morale
6b27ff1e27 OP-1022 add position lowpass, rework setting uavo, cleanup 2013-07-19 11:28:48 +00:00
Alessio Morale
e2a7c6cb25 OP-1022 Reset altitude and velocity when stick goes to deadband 2013-07-19 07:57:24 +00:00
Oleg Semyonov
aa560653d4 Make baro altitude offset (relative to GPS alt) filter configurable 2013-07-19 09:53:44 +03:00
Corvus Corax
ea8373b0f7 re-enabled wind estimation absed on groundspeed 2013-07-18 20:01:02 +02:00
Corvus Corax
2ab92f09a5 fix for the fix 2013-07-18 14:15:23 +02:00
Corvus Corax
9ba1fbdccc fixed safety check for throttle low, needed for arming on switch, too, but not for disarming 2013-07-18 14:10:33 +02:00
Corvus Corax
7b5bf53200 fixed channel reversals 2013-07-18 13:46:58 +02:00
Corvus Corax
50561bfb5f made arming/disarming sequence time configurable - useful for heli pilots that like almost-instant disarm 2013-07-18 13:13:23 +02:00
Corvus Corax
114e25ff5d cleaned up code for armin/disarming and got rid of a bunch of assumptions 2013-07-18 13:05:37 +02:00
Corvus Corax
658b2fc804 cherry-pick of Sambas Arm-On-A-Switch capability implementation 2013-07-18 10:45:36 +02:00
Corvus Corax
6c88184b32 Merge branch 'corvuscorax/OP-1036_fixed-wing-improvements' into next 2013-07-18 09:46:23 +02:00
Corvus Corax
bffe119214 made safety checks in fixed wing path follower configurable 2013-07-17 14:50:23 +02:00
Alessio Morale
005a68826d OP-1022 Converted to a plain Altitude PID + Velocity PI implementation 2013-07-17 08:38:44 +00:00
Alessio Morale
8c70e64544 OP-1022 reset velocity when changing flight mode 2013-07-17 08:37:56 +00:00
Werner Backes
45cebda628 Add a configurable lowpass filter to smooth throttle commands in 
AltitudeHold mode.

Conflicts:
	flight/modules/AltitudeHold/altitudehold.c
	shared/uavobjectdefinition/altitudeholdsettings.xml
 2013-07-16 21:21:21 +00:00
Werner Backes
7708aab313 Added vertical velocity as a control loop input to improve dynamics during 
commanded ascend/decent.

Conflicts:
	flight/modules/AltitudeHold/altitudehold.c
	flight/modules/ManualControl/manualcontrol.c
	shared/uavobjectdefinition/altitudeholdsettings.xml
 2013-07-16 21:17:32 +00:00
Alessio Morale
ed233efde2 OP-1022 Uncrustify 2013-07-16 20:02:03 +00:00
Alessio Morale
0203e2c6e2 OP-1022 Adding a proportional term on the square of the altitude error. 2013-07-16 20:01:16 +00:00
Alessio Morale
5b4d46819e OP-1022 Fix problem with EventSystem due to too high update rate 2013-07-16 12:25:58 +00:00
Alessio Morale
e975e4d9b7 OP-1022: replace old KF in alitude hold with status from filters 2013-07-16 12:25:57 +00:00
Alessio Morale
a57f8913ba OP-1022: replace old KF in alitude hold with status from filters 2013-07-16 12:25:57 +00:00
Alessio Morale
133ad414f8 OP-1022: Added a velocity loop in AH module, used when throttle is not in central position. 2013-07-16 12:25:57 +00:00
Werner Backes
23b5b37480 Scale down initial throttle when AH is engaged based on roll/pitch angle. 
This improves AH behaviour when switching to AH while being in fast
forward flight.
 2013-07-16 12:25:57 +00:00
Werner Backes
513d509865 Initialize altitude before switching to "running". Not doing this could 
cause glitches during the very first switch to AH.
 2013-07-16 12:25:57 +00:00
Werner Backes
1da68cda9a Scale up desired throttle in AH mode to compensate for roll/pitch 2013-07-16 12:25:57 +00:00
Werner Backes
73aa4df431 Missing " 2013-07-16 12:25:57 +00:00
Werner Backes
723f308ac7 Removed obsolete (unused) code 2013-07-16 12:25:57 +00:00
Werner Backes
45ed66414f Changed AH to work with absolute instead of relative altitude 2013-07-16 12:25:56 +00:00
Werner Backes
aecc8543a5 Corrected throttle stick exponentional function in AH mode 2013-07-16 12:25:56 +00:00
Alessio Morale
11bc7804d0 Merge branch 'amorale/OP-994_adc_cleanup' into next 2013-07-16 12:23:25 +00:00
Corvus Corax
81e691f2d6 fixed stack size for manualcontrol, fixed acking behaviour for waypoints 2013-07-16 10:12:16 +02:00
Alessio Morale
104bae01e8 OP-994 Exclude alarm for estimated flight time if Capacity setting is 0 
+review OPReview-506
 2013-07-15 20:35:26 +00:00
Corvus Corax
8b6510da4f Made AltitudeOffset for ReturnToHome configurable, Made Failsafe-FlightMode configurable. 2013-07-15 09:14:09 +02:00
Alessio Morale
402c84c003 OP-994 Added zero calibration settings 
+review OPReview-506
 2013-07-14 20:26:07 +00:00
Corvus Corax
4d28052dd8 update configuration check prior to arming control, just in case. Allthough the configuration didn't change, other parameters like the list of running tasks can, which alters the alarms. 2013-07-14 06:20:22 +02:00
Corvus Corax
f3a96e5620 Bugfixed in fixed wing path follower, high wind situation now succesfully detected 2013-07-11 16:22:24 +02:00
Corvus Corax
0ffb2dee02 bugfix in pathplanner - 3d distance not calculated correctly 2013-07-11 14:35:37 +02:00
Corvus Corax
c1f32e9beb OP-1036: rename some settings and move them in the right place 
tags: de-kenzification
 2013-07-10 15:55:12 +02:00
Corvus Corax
27eadc200b Merge branch 'corvuscorax/lla2nedfilter' into next 
Conflicts:
	flight/modules/StateEstimation/stateestimation.c
 2013-07-10 14:38:12 +02:00
Corvus Corax
551780c74b Merge branch 'corvuscorax/complementary_altitude_filter' into next 
Conflicts:
	flight/targets/boards/revolution/firmware/UAVObjects.inc
 2013-07-10 14:27:25 +02:00
Brian Webb
c2df59498b Merge remote-tracking branch 'origin/master' into next 2013-07-06 07:08:30 -07:00
Brian Webb
0d02df4d02 Uncrustified OPLink code. 2013-07-05 18:49:26 -07:00
Brian Webb
6dbecca7a5 OP-932 Fixes erasing settings on OPLink and blocks OPLinkSettings objects from being transmitted over the radio. 2013-07-05 18:25:52 -07:00
Brian Webb
d0d8a0aadd OP-932 Adds PWM outputs to OPLinkMini. Both gpio pins on the main and/or flexi port can be configured to output PWM for a total of up to 4 PWM outputs. 2013-07-03 18:58:34 -07:00
Corvus Corax
0107432e45 Added a low pass filter for accels to the altitude filter 2013-07-02 23:17:08 +02:00
Alessio Morale
89cb294218 OP-994 Move pios_architecture,h include in pios,h 
+review OPReview-506
 2013-07-02 19:26:39 +02:00
Brian Webb
c76ee7de9d OP-932 Fixes the failsafe that detects when the Rx modem loses sync with the Tx modem. This was not working on one-way mode. 2013-06-30 16:08:50 -07:00
Corvus Corax
ba87f32812 typo fix 2013-06-30 19:46:28 +02:00
Corvus Corax
51a4b16af5 New Filter to calculate NED from LLA as part of StateEstimation 2013-06-30 18:49:29 +02:00
Corvus Corax
2a16c0dbd7 removed GPS module ability to calculate NED coordinate (not its job) 2013-06-30 16:31:19 +02:00
Brian Webb
491e5fe685 Adds a failsafe on PPM output on OPLink that kicks in when the link goes down. Also updates all air datarate settings and adds new 64 and 100 kbps modes. 2013-06-29 15:00:38 -07:00
Corvus Corax
7745f93935 changed default coefficients and exposed them to a settings uavobject as they should be 2013-06-29 01:16:02 +02:00
Corvus Corax
2621b087a2 fixed filter in first bench test tries, works surprisingly well... 2013-06-28 21:27:05 +02:00
Corvus Corax
2fb0c0a3ce some uncrustification 2013-06-28 19:52:09 +02:00
Corvus Corax
b19a74613a uncrustification 2013-06-28 19:20:39 +02:00
Corvus Corax
360e58abde eventdispatcher, limit event callback count fired in one go 2013-06-28 19:04:11 +02:00
Corvus Corax
b9038e5ed6 new simple complementary filter to calculate current altitude and vertical speed 2013-06-28 17:22:16 +02:00
Brian Webb
bab69401b9 OP-932 Allows configuring the Revo as coordinator. 2013-06-27 19:55:01 -07:00
Brian Webb
6386b12026 OP-932 Fixes raw serial on UART and USB VCP. 2013-06-27 19:16:01 -07:00
Corvus Corax
f5b3318726 correct calculation of next scheduling 2013-06-27 20:37:37 +02:00
Corvus Corax
cd2cc821d6 made event dispatcher a callback 2013-06-27 18:51:35 +02:00
Brian Webb
d5f16faaec OP-932 Fixes the datarate used on PPM only mode, and fixes failsafe on PPM output on OPLM. 2013-06-26 20:11:39 -07:00
Brian Webb
caa8d3e70e OP-932 Forces one-way to be set when PPM only is configured. 2013-06-26 18:02:08 -07:00
Brian Webb
2aea2342ab OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo. 2013-06-26 18:01:54 -07:00
Brian Webb
b25ba75fd9 OP-932 Removed obsolete include of pios_rfm22b_rcvr from pios.h. 2013-06-26 18:00:22 -07:00
Brian Webb
44a0266e41 OP-932 Adds claiming of the SPI bus in the OPLink channel change function. 2013-06-26 18:00:02 -07:00
Brian Webb
56a60f2983 OP-932 Updates the 19.2 kbps datarate using the spreadsheet. 2013-06-26 17:59:49 -07:00
Brian Webb
61c453f6ff Removes several of the air datarate settings, and fine tunes the calculation of the max packet length from the datarate and packet time. 9600, 19200, 36400, and 57600 modes tested. Tested 19200 in one-way mode for PPM only. 2013-06-26 17:59:33 -07:00
Brian Webb
f8d60e6dee OP-932 Adds additional thread and UAVTalk connection to the telemetry module that reads from the uart/radio link on the Revo. This allows the Revo to read OAVObjects over both the uart/radio link and the USB link at the same time. Unfortunately, there's no way to know which link to send UAVObjects out on, so all UAVObjects go to the USB port if USB is connected. This allows UAVObjects to be received from the OPLink radio, even when USB is connected. 2013-06-26 17:58:02 -07:00
Brian Webb
cdd51537f1 Fixes the 9600 bps air datarate for the RFM33B modem. 2013-06-26 17:57:46 -07:00
Brian Webb
fc0328a3cd OP-932 Adds working one-way mode to the OPLink radio connection. In this mode, packets will only flow from the ground side (coordinator modem) to the flight side modem. 2013-06-26 17:57:32 -07:00
Brian Webb
774a74884a OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo. 2013-06-26 17:57:11 -07:00
Brian Webb
8c370df319 OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device. 2013-06-26 17:56:56 -07:00
Brian Webb
12c8ef2e3a OP-932 Changes the UAVTalkRelayInputStream function to UAVTalkRelayPacket to allow for not relaying a packet on error, etc. Also adds a function to get the object ID out of the current packet (UAVTalkGetPacketObjId). These functions are used by the OPLink. 2013-06-26 17:56:40 -07:00
Brian Webb
08efc8d152 OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem. 2013-06-26 17:56:20 -07:00
Brian Webb
7c10623615 OP-932 Adds a semaphore to PPM input to signal when a new frame has been received. This can be used to process a new frame with as low a latency as possible. 2013-06-26 17:56:10 -07:00
Brian Webb
ac75af55c1 OP-932 Moves the PIOS_PPM_OUT_Set function from pios_ppm_out_priv.h to pios_ppm_out.h 2013-06-26 17:55:56 -07:00
Corvus Corax
0c43346292 Merge branch 'corvuscorax/OP-947_stateestimator-module' into next 
Thanks everyone for helping getting this together, especially Alessio
and DLite :-)
 2013-06-25 23:48:12 +02:00
Corvus Corax
ed592bd6ab Merge remote-tracking branch 'origin/rel-13.06.01' into next 2013-06-25 22:32:14 +02:00
Corvus Corax
f2abe1f5c7 StateEstimation: removed (not yet implemented) 16 state EKF support for now 2013-06-25 19:30:21 +02:00
Alessio Morale
0b8d18ae49 OP-994 Move common defines to architecture specific header 
+review OPReview-506
 2013-06-24 18:50:44 +02:00
Corvus Corax
5bdfad4bdb removed redundant check as suggested in review 2013-06-23 19:39:00 +02:00
Corvus Corax
e916902c9e changed alarm return states, so cf initialisation will cause visible LED blinks... 2013-06-23 19:26:17 +02:00
Corvus Corax
407817f959 backport of complementary filter bugfix 2013-06-23 18:37:43 +02:00
Corvus Corax
4bf934ae69 prevent positionSensor updates if GPS lock is low quality. Sometimes bad updates are worse than no updates. 2013-06-22 23:15:10 +02:00
Corvus Corax
3392622d2b backporting change on next to modified Attitude module 2013-06-22 23:07:53 +02:00
Corvus Corax
6163c5f53a Merge branch 'next' into corvuscorax/OP-947_stateestimator-module 
Conflicts:
	flight/modules/AltitudeHold/altitudehold.c
	ground/openpilotgcs/share/openpilotgcs/pfd/default/AltitudeScale.qml
	ground/openpilotgcs/share/openpilotgcs/pfd/default/PfdIndicators.qml
	ground/openpilotgcs/share/openpilotgcs/pfd/default/SpeedScale.qml
	ground/openpilotgcs/src/plugins/pfd/pfdgadgetwidget.cpp
 2013-06-22 18:44:03 +02:00
Oleg Semyonov
7f84307714 OP-997: fix release notes. This change was reverted but not documented 2013-06-22 18:29:40 +02:00
Corvus Corax
ee1465fd9a OP-1018: Fix ETASv3 Airspeed sensor autocalibration 2013-06-22 12:53:23 +02:00
Alessio Morale
57c8cd7872 Merge branch 'amorale/OP-1019_simple_altitudehold' into next 2013-06-21 17:16:24 +02:00
Alessio Morale
d2893fd32b OP-1019 fix sanitychecks and other uavo definition sanity checks for the newly defined altitudevario mode 2013-06-20 19:39:19 +02:00
Werner Backes
e5b68382e0 Keep TODO comment. 2013-06-20 14:35:40 +02:00
Werner Backes
0f5e354f99 Removed first occurance of accel_err scaling. We don't want to do this 
twice.
 2013-06-20 12:42:22 +02:00
Alessio Morale
5318c20de6 OP-1019 add a simple altitude hold 2013-06-20 11:27:45 +02:00
Alessio Morale
f41f7ade66 Merge remote-tracking branch 'origin/amorale/OP-1009_reset_gyrobias' into next 2013-06-18 20:39:55 +02:00
Alessio Morale
5cc3645b96 Uncrustify 2013-06-18 20:23:46 +02:00
Alessio Morale
54af41765e OP-1009 missing initialization on a previously static variable. 
+review OPReview-516
 2013-06-17 21:42:30 +02:00
Alessio Morale
b012d55f26 OP-1009 fix comments and fixes review 
+review OPReview-516
 2013-06-17 21:01:24 +02:00
Alessio Morale
2b232ae155 Fix bootloader usb issues caused by USB reconnection fixes. 
Issues were related to missing usb detection and broken communication while updloading fw.
They are now skipped in NON FreeRTOS mode (aka bootloader).

+review OPReview
 2013-06-17 20:24:07 +02:00
Alessio Morale
840e6aa4f7 OP-994 Move temp calculation to a macro defined in pios_board.h as it is achitecture dependant 
+review OPReview-506
 2013-06-15 18:47:33 +02:00
Alessio Morale
d5a77fb525 OP-1009 prevent gyro zeroing from raise an alarm when arming 2013-06-15 17:28:30 +02:00
Alessio Morale
517c331dd4 OP-1012 fixed speeds to make easy to distinguish flash rates 2013-06-15 17:27:48 +02:00
Alessio Morale
f2431b2868 GPS module is builtin so there is no way to shut the gps alarm when gps is not used. 
This change does remove any alarm when no port is configured for gps.
Things depending on GPS will continue to raise their own alarm when no gps data are feed.
 2013-06-15 16:39:29 +02:00
Alessio Morale
354fdf4bdf OP-1012 implement several messages for alarm led 2013-06-15 16:38:53 +02:00
Alessio Morale
49da1aca86 OP-1009 Redo gyro zero in Complementary after calibration parameters changes 2013-06-15 16:22:24 +02:00
Corvus Corax
1d17d08cca Merge branch 'next' into corvuscorax/OP-947_stateestimator-module 2013-06-12 18:32:01 +02:00
Alessio Morale
3c39b049d6 Fixed wrong deadband range for AH 2013-06-11 21:17:17 +02:00
Alessio Morale
04326e2386 Merge remote-tracking branch 'origin/amorale/OP-999_ah_failsafe' into next 2013-06-11 15:39:43 +02:00
Alessio Morale
ad123a2761 Merge remote-tracking branch 'origin/amorale/OP-980_connection_reliability_issue' into next 2013-06-11 15:39:34 +02:00
Alessio Morale
2c0f7794a9 Merge remote-tracking branch 'origin/amorale/OP-997_revolution_settings_to_ext_flash' into next 2013-06-11 15:39:13 +02:00
Alessio Morale
f767d64f0c OP-980 Remove the timeout logic as it causing troubles with windows 
platform
 2013-06-11 10:27:32 +02:00
Alessio Morale
c1a1c04ad8 OP-999 trigger a failsafe condition in AH module when throttle is below 0 for more than 200ms 
+review OPReview
 2013-06-10 23:48:08 +02:00
Brian Webb
789930db45 Moved PIOS_TASK_MONITOR_Initialize to before EventDispatcherInitialize. The event dispatcher creates a task that registers itself with the task monitor. It is unlikely that the task will start before the task monitor is initialized, but not impossible (at least on the F4 targets, I don't think). 2013-06-09 20:16:40 -07:00
Corvus Corax
88071b1078 Merge remote-tracking branch 'next' into corvuscorax/OP-947_stateestimator-module 2013-06-09 22:43:25 +02:00
Corvus Corax
47523bfe15 update PositionSensor whenever there is a 3d fix position update, even if its not good quality... 2013-06-09 22:42:14 +02:00
Corvus Corax
6f59c49506 just uncrustification 2013-06-09 22:09:04 +02:00
Corvus Corax
d8f9f839f2 startup grace time for filter initialisation 2013-06-09 21:49:04 +02:00
Alessio Morale
e9b3ee52f3 OP-997: add fields to SystemStatsUavo to monitor storage status 2013-06-09 19:20:00 +02:00
Alessio Morale
1cb69e6a0e OP-997: Revert Revolution settings storage to external flash to prevent freezes during sector erase/garbage collection 2013-06-09 19:17:12 +02:00
Corvus Corax
218e15ce61 Merge branch 'next' into corvuscorax/OP-947_stateestimator-module 2013-06-09 17:24:08 +02:00
Alessio Morale
87db5d30b0 OP-980 change how the semaphore is used on PIOS_USB_CheckAvailable to prevent deadlocks 2013-06-09 16:14:44 +02:00
Corvus Corax
a99255a36a allow smaller nonzero variances during runtime 2013-06-09 13:57:36 +02:00
Corvus Corax
022f1a1ac0 Merge branch 'next' into corvuscorax/OP-947_stateestimator-module 
Conflicts:
	flight/modules/Attitude/revolution/attitude.c
 2013-06-09 13:49:52 +02:00
Alessio Morale
6d71d92860 Merge remote-tracking branch 'origin/amorale/OP-990_revo_bias_with_shaken_startup' into next 2013-06-09 09:10:33 +02:00
Alessio Morale
0f28920e5f Merge remote-tracking branch 'origin/amorale/OP-988_gps_not_configured_alarm' into next 2013-06-09 09:09:44 +02:00
Alessio Morale
107b930573 Merge remote-tracking branch 'origin/amorale/OP-980_revolution_usb_reconnect' into next 2013-06-09 09:07:24 +02:00
Alessio Morale
59eaf01089 OP-990 Change initial delay before calibration to 4 seconds to allow to put the craft on the ground after battery connection 
+review OPReview-505
 2013-06-09 08:59:35 +02:00
Alessio Morale
cea6496866 OP-995: Cleanup of Battery Module 2013-06-08 13:53:19 +02:00
Alessio Morale
bdd80a63c9 OP-994: Refactor/Cleanup of cpu temp measurement: fixed declarations for Voltage Scale constants 2013-06-08 13:46:57 +02:00
Alessio Morale
ab1c9c157f OP-995: Fixes for correct battery monitor readout 2013-06-08 13:40:01 +02:00
Alessio Morale
51a7f27b99 OP-994 Add an API to PIOS_ADC to get directly the Voltage value 2013-06-08 13:36:54 +02:00
Alessio Morale
6671a404ca OP-994 Refactor/Cleanup of cpu temp measurement 2013-06-08 13:36:18 +02:00
Alessio Morale
7a6b5c5681 OP-990 Fixed the main cause of wrong bias calculation: 
The initial bias calculation done between 1 and 7 seconds
since power on was completely skipped due to a wrong condition.
 2013-06-08 13:10:23 +02:00
Alessio Morale
3ad123718e Revert "OP-990 zeroed the rollpitch bias rate at startup and incremented at arming." 
This reverts commit c0b926a2d5.
 2013-06-08 13:10:23 +02:00
Corvus Corax
f79c227def Merge branch 'corvuscorax/uavobjmanagerfix' into corvuscorax/OP-947_stateestimator-module 2013-06-06 22:41:31 +02:00
Corvus Corax
115b991f86 Bugfix in UAVObjectmanager. LoadFromFile() is not allowed to use GetByID since its called from Register, where the uavobject is not registered yet. 2013-06-06 21:22:17 +02:00
Corvus Corax
6fdf554d4a Merge branch 'next' into corvuscorax/OP-947_stateestimator-module 
Conflicts:
	flight/modules/Attitude/revolution/attitude.c
	ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
	shared/uavobjectdefinition/attitudesettings.xml
 2013-06-06 19:25:54 +02:00
Corvus Corax
fcc3f519d8 filterekf: Remember critical divergence and set error flag to prevent (re)arming so the user will notice 2013-06-06 17:59:27 +02:00
Corvus Corax
b0db191703 Divide mag variance by Be squared to cope with normalization correctly 2013-06-06 17:54:59 +02:00
Alessio Morale
ee7887c406 OP-980 Extended the memory barrier macros and fixed barrier kind in pios_usb_hid 
+review OPReview-501
 2013-06-06 10:26:41 +02:00
Mathieu Rondonneau
45391abd55 OP-976: RE-run uncrustify 2013-06-05 19:48:56 -07:00
Mathieu Rondonneau
a8c946dcb2 OP-976: Fix uncrustify changes that put a space before the ";" in the macro 2013-06-05 19:46:55 -07:00
Mathieu Rondonneau
89273146df Merge branch 'next' into Mathieu/OP-976_module_macro 2013-06-05 19:17:54 -07:00
Mathieu Rondonneau
d2fae1abed OP-976: fixing function name in the macro although don't have any effect since the linker directives are local. 2013-06-05 19:15:47 -07:00
Alessio Morale
c340bfc294 OP-980 Insert locking while checking status in PIOS_USB_CheckAvailable 
+review OPReview-501
 2013-06-06 01:42:26 +02:00
Alessio Morale
5fa73624da OP-980 Added memory barrier to preserve sequence to ensure callback validation 
+review OPReview-501
 2013-06-06 01:39:45 +02:00
Corvus Corax
bab95e7ca8 check variances for validity and reinitialize if invalid 2013-06-06 00:07:11 +02:00
Corvus Corax
f22a0d299e EKF: Averaging term for dT 
- prevent scheduling jitter from screwing with the filter while keeping dT accurate
 2013-06-06 00:06:12 +02:00
Alessio Morale
c0b926a2d5 OP-990 zeroed the rollpitch bias rate at startup and incremented at arming. 2013-06-05 22:19:20 +02:00
Corvus Corax
6f6ca2481e Changed CoordinateConversion to use doubles for LLA2NED conversion, so coordinates can be represented in ECEF with sufficient resolution 2013-06-05 20:40:49 +02:00
Corvus Corax
5e306250a5 Enabled simulated sensors in SimPosix for debugging of EKF behaviour including: 
- SimPosix again stores and reads UAVObjects to disk (was disabled by someone)
- simulated sensors moved to allow automated module initialisation in simposix
- fixed a categorization bug in a uavobject
 2013-06-05 19:34:48 +02:00
Alessio Morale
b4f8b02a42 Revert "some optimizations, use real rx and tx buffer size instead of max buffer leghts" 
It does not work in Windows so need further investigation prior to undo this revert
This reverts commit 901db6f828.
+review OPReview-501
 2013-06-05 19:01:01 +02:00
Corvus Corax
dc68d7d94e changed insgps, removed unnecessary gain representation 2013-06-05 17:52:49 +02:00
Brian Webb
f9706132f7 Fixed setting of timestampLength in UAVTalk parsing when the UAVObject is not initialize in the firmware. This mostly affects the OPLink, which doesn't initialize most of the UAVObjects, but does need to parse them. 2013-06-04 20:37:51 -07:00
Alessio Morale
8fb81ae17b OP-980 uncrustify 
+review OPReview-501
 2013-06-05 01:02:37 +02:00
Alessio Morale
f1f48b0ec6 OP-980 Fix usb reconnection issue for Revolution target. 
step 3: add a timeout on rx_active to prevent rx locks
 2013-06-05 00:54:08 +02:00
Alessio Morale
901db6f828 some optimizations, use real rx and tx buffer size instead of max buffer leghts 2013-06-05 00:53:50 +02:00
Alessio Morale
ce2bce353f OP-980 Fix usb reconnection issue for Revolution target. 
step 2: check for cable disconnection (vbus) and issue a SW reconnection
 2013-06-05 00:04:26 +02:00
Mathieu Rondonneau
23b2907d08 OP-976: Add the ';' back 
This compile successfuly with make all_flight
 2013-06-03 20:37:40 -07:00
Alessio Morale
14b87383b9 OP-980 Fix usb reconnection issue for Revolution target. 
step 1: reset tx/rx_active flags on disconnection/reconnection
 2013-06-04 01:52:44 +02:00
Alessio Morale
cfe057c573 OP-988 Raise SYSTEMALARMS_ALARM_CRITICAL when no gps port is configured, the same alarm as no gps case. 
+review OPReview
 2013-06-03 20:30:41 +02:00
Oleg Semyonov
65c463bf03 Update Windows USB driver file 2013-06-03 16:39:41 +03:00
Richard Flay (Hyper)
8c494dce00 OP-982: Further updates to Strings in response to review feedback. 
+review OPReview-493
 2013-06-02 18:43:37 +09:30
Richard Flay (Hyper)
3e6389d9b6 OP-982: Updates to spacing and Strings in response to review feedback. 
+review OPReview-493
 2013-06-02 18:11:04 +09:30
Richard Flay (Hyper)
35b580a34e OP-982: Adds Revolution related entries to OpenPilot-CDC.inf for Windows. 
+review OPReview
 2013-06-02 08:44:54 +09:30
Corvus Corax
6435604182 some fixes and corrections as suggested in review 2013-05-29 22:18:08 +02:00
Corvus Corax
e82a52e8ff filterekf: changed mag variance to 1/1000000 to compensate for normalization, as it was done on old AHRS 2013-05-29 22:02:39 +02:00
Alessio Morale
6b2218d1df Merge remote-tracking branch 'origin/amorale/OP-925_Cyr_patches_for_revo_cf' into next 2013-05-28 18:39:42 +02:00
Alessio Morale
a286a20cb0 OP-925 Changed dT to comply with revo sensor rate 
+review OPReview-484
 2013-05-27 21:05:39 +02:00
Fredrik Arvidsson
d9d2b7d167 Merge remote-tracking branch 'origin/os/OP-770_version_info_stuff' into thread/OP-770_UAV_Export_Version_Info_Fix 2013-05-27 19:30:18 +02:00
Brian Webb
50162333d8 Merge remote-tracking branch 'origin/dankers/minor-modem-renames' into next 2013-05-27 09:44:17 -07:00
Brian Webb
16b787179c Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next 2013-05-26 08:37:05 -07:00
Brian Webb
e9f83bcc80 Fixes a bug in the rfm22b driver that was reading past the end of the bindings list when receiving a status message. Also adds some formatting changes that came about after doing a make uncrustify_all. 2013-05-26 08:36:38 -07:00
Alessio Morale
9bfce1bcd6 Merge remote-tracking branch 'origin/amorale/OP-925_Cyr_patches_for_revo_cf' into next 2013-05-26 16:18:05 +02:00
David Ankers
69ede538c9 Update date bu just an easy ay to start review +review OPReview-485 2013-05-26 17:50:44 +10:00
David Ankers
2f9c9df736 Increase the size of the USB Descriptor array to take extra char 2013-05-26 17:03:48 +10:00
David Ankers
7a9466bbf9 State in the header which board this is for 2013-05-26 16:12:35 +10:00
David Ankers
f7a9f94a36 Missing file header 2013-05-26 16:09:55 +10:00
David Ankers
a5b856d1bc Change board description name to OPLink Mini 2013-05-26 16:04:55 +10:00
David Ankers
d5eccea78f Comment and header renames, change PipX to OPLink Mini 2013-05-26 15:48:02 +10:00
Oleg Semyonov
444431579e OP-770: add/rename some version-info.py template variables 2013-05-25 23:02:29 +02:00
Corvus Corax
7bf58f09c5 filterekf gyro bias adjustment bugfix 2013-05-25 16:18:18 +02:00
Brian Webb
4036e95bd5 Merge remote-tracking branch 'origin/next' into OP-932-Modularize_Radio_Driver 2013-05-25 06:56:13 -07:00
Corvus Corax
6c25e82633 fixed bugs in GPS, corrected zeroing of updated flags in stateestimation 2013-05-25 12:28:32 +02:00
Richard Flay (Hyper)
bd538703ea OP-962: Tweaked C2U_STACK_SIZE_BYTES to be a multiple of 4. 
+review OPReview-480
 2013-05-25 17:10:41 +09:30
Corvus Corax
87b1b4873c bugfix in baro alt filter plugin 2013-05-25 02:02:53 +02:00
Corvus Corax
902bf29c92 some small bugfixes to filterekf 2013-05-25 00:05:06 +02:00
Corvus Corax
b916df5448 ported cyr's patch to new CF 2013-05-24 23:59:12 +02:00
Corvus Corax
259eeecbbc Put Macros in StateEstimation into the file header after request in review. 
Author expresses concernes about the code readability in this layout
(Commit message edited, was: "HATE THIS")
 2013-05-24 19:19:40 +02:00
Corvus Corax
40864b2d3b some cleanups 2013-05-23 21:21:14 +02:00
Alessio Morale
711f1ad35b Fix indentation 2013-05-23 00:47:38 +02:00
Corvus Corax
53ba3f4b74 removed GPS check from ekf and put into GPS 2013-05-22 23:20:31 +02:00
Alessio Morale
697874b315 Port of OP-754 On Revo. Fixed signs on bias calculation. Added rate zeroing at startup to yaw 2013-05-22 23:17:09 +02:00
Corvus Corax
843db63cf6 some last issues from review 2013-05-22 23:08:48 +02:00
Corvus Corax
9b95af2006 refaktored GPS Sensor UAVObjects 2013-05-22 22:36:23 +02:00
Corvus Corax
b56de3b66b filterchain rework 2013-05-22 21:26:18 +02:00
Corvus Corax
8fe159c457 some changes... 2013-05-22 19:05:28 +02:00
Brian Webb
ac4847c8ac OP-932 Moves the configuration of the com ports on the coordinator OPLink to startup. 2013-05-21 19:48:21 -07:00
Brian Webb
dbce08a151 OP-932 Changes the radio task loop to loop every 1ms, and reduces the tx transmit period back down to 8ms. Also reduces the Tx windows to 1ms for each modem, and reserves the latter half of the Tx window for channel changing. 2013-05-21 17:40:05 -07:00
Alessio Morale
294a295510 Port CF patch from Cyr that filters accel to reduce attitude drift due to vibrations 2013-05-22 00:55:10 +02:00
Alessio Morale
0b5a28f19e Port OP-754 to Revolution attitude estimation module: subtract GyroBIAS to work on raw value 
Added MagKp and MagKi to AttitudeSetting UAVO
 2013-05-21 23:44:12 +02:00
a*morale
464d2be9f7 Port OP-754 to Revolution attitude estimation module 2013-05-21 22:40:35 +02:00
Corvus Corax
ecc4a529a3 some fixes to filtercf and stateestimation and filterekf - Thanks Werner for help :-) 2013-05-21 20:06:33 +02:00
Brian Webb
d4a4588011 OP-932 Changes the RFM22 frequency hopping to change channels every Tx period. Also increases the Tx clock period from 8ms to 16ms, and adds a check on calculation the the time delta that it doesn't change the previous estimated time delta by too much. If the delta between the current time delta and the previously estimated time delta is too large it could indicate that there was a delay somewhere that makes the calculated time delta inaccurate. 
Rearanges the packet send priority in the rfm22b driver so that PPM packets are top priority.
 2013-05-20 20:49:24 -07:00
Alessio Morale
8e7e7e052a OP-962 Fix Stack size for ComUSBBridge 
+review OPReview
 2013-05-21 00:45:45 +02:00
Corvus Corax
3dda543608 Merge branch 'corvuscorax/OP-946_refaktor_sensor_and_state' into corvuscorax/OP-947_stateestimator-module 2013-05-20 20:53:46 +02:00
Corvus Corax
fb433a97d7 Bugfix: add gyro bias to correct axis 2013-05-20 20:52:45 +02:00
Corvus Corax
3cb4f59c94 failsafe, fallback to attitude for now until StateEstimation works reliably 2013-05-20 20:49:34 +02:00
Corvus Corax
a04b76f836 some bugfixes to make it boot on revo 2013-05-20 20:25:20 +02:00
Corvus Corax
8a36959d39 OP-945: Filter refaktoring - last fixes to make it compile 2013-05-20 17:04:52 +02:00
Corvus Corax
e7c35a94f6 added EKF filter 2013-05-20 16:31:10 +02:00
Corvus Corax
a286cc6b24 update settings during initialisation only 2013-05-20 15:28:18 +02:00
Corvus Corax
a03f87efb5 Complementary filter added 2013-05-20 15:04:36 +02:00
Corvus Corax
741c70cda4 barometric bias filter added 2013-05-20 12:56:40 +02:00
Corvus Corax
7ea258a895 airspeed filter added 2013-05-20 12:45:39 +02:00
Corvus Corax
2f082dbf87 added filter for magnetometer bias drift compensation 2013-05-20 11:24:57 +02:00
Corvus Corax
1bd9cdafab added missing attitude state variable ;) 2013-05-20 10:43:40 +02:00
Corvus Corax
34294d2635 Magneto to Mag fix 2013-05-20 10:35:54 +02:00
Corvus Corax
d258caad3f Merge branch 'corvuscorax/OP-946_refaktor_sensor_and_state' into corvuscorax/OP-947_stateestimator-module 2013-05-20 10:34:40 +02:00
Corvus Corax
1236bf3ed9 renamed Magneto to Mag 2013-05-20 10:33:02 +02:00
Corvus Corax
49b8e0d699 Merge branch 'next' into corvuscorax/OP-946_refaktor_sensor_and_state 2013-05-20 10:07:55 +02:00
Oleg Semyonov
0798d8e330 OP-891: move firmware_info template under flight directory 2013-05-20 01:12:45 +03:00
Corvus Corax
46e7d2121f fake filter for stationary position data added 2013-05-19 22:49:11 +02:00
Corvus Corax
bf80b3f103 readded missing header 2013-05-19 22:40:50 +02:00
Corvus Corax
bc6f06e943 first filter implemented and some bugs fixed 2013-05-19 22:24:12 +02:00
Corvus Corax
b62c758831 statefilter main file almost complete, time to start work on filter classes 2013-05-19 22:24:12 +02:00
Corvus Corax
2ab9f938c9 ongoing dev work, incomplete 2013-05-19 22:24:12 +02:00
Corvus Corax
d97934cf86 Merge branch 'next' into corvuscorax/OP-946_refaktor_sensor_and_state 2013-05-19 22:05:48 +02:00
Brian Webb
649667d338 Addes ifdef PIOS_INCLUDE_WDG around several calls to the wathdog functions for the Revolution firmware (allows you to turn off the watchdog). 2013-05-19 12:56:23 -07:00
Sexy Pony
900f643bbd Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES 2013-05-19 17:37:30 +03:00
Alessio Morale
ab7af16be3 Merge branch 'amorale/OP-901_lib_udates-usb_fixes' into HEAD 
Conflicts:
	flight/pios/stm32f10x/library.mk
	flight/targets/boards/revoproto/firmware/pios_board.c
 2013-05-19 15:01:08 +02:00
Corvus Corax
f630351c75 Merge branch 'next' ... 2013-05-19 12:17:40 +02:00
Alessio Morale
37eabb0931 Pointed type is explicitly used with sizeof when dealing with struct pointers. 
+review OPReview-474
 2013-05-19 12:00:16 +02:00
Corvus Corax
daf329d8f5 uncrustification (again) 2013-05-19 11:38:18 +02:00
Alessio Morale
88a39a81d8 Enable ComUsbBridge Optional Module and fix CDC support for RevoProto 2013-05-19 10:07:01 +02:00
Corvus Corax
39cde8947c removed forgotten commented out code 2013-05-18 22:19:22 +02:00
Corvus Corax
9c3a8369cd OP-946: State And Sensor Refaktoring: Moved Filtering for Magnetometers, Gyros and Accels into Attitude 2013-05-18 21:55:47 +02:00
Alessio Morale
2e458b5652 OP-901 USB OTG/Device Drivers are not targeted for f103 (they are targeted at f105) so move again to F4 library folder instead of common 2013-05-18 20:53:28 +02:00
Alessio Morale
3ec9447fdc OP-901 Update CMSIS to r3p2-00rel1 2013-05-18 20:29:06 +02:00
Corvus Corax
5284195c29 Refaktored sensor and state UAVObjects consistently into XXYSensor and XXYState 2013-05-18 19:36:45 +02:00
Alessio Morale
e8dc7509f9 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next 2013-05-18 17:18:48 +02:00
Oleg Semyonov
80ce4fc995 Fix weird error of running python script with extra --verbose option as a part of script name 
This error of building any EF targets was found on Windows if used with
make V=1 verbose output option. The '--verbose' python script option was
used by the Windows make as a part of python script file name with
'file not found' error. Now it works. Still can't get the cause of that
error, though...
 2013-05-18 17:25:26 +03:00
Alessio Morale
c1f767b12d Merge remote-tracking branch 'origin/amorale/OP-954_logfs_settings_in_internal_flash' into next 
Conflicts:
	flight/pios/common/pios_flashfs_logfs.c
 2013-05-18 15:53:25 +02:00
Alessio Morale
66da2796e0 Merge remote-tracking branch 'origin/amorale/OP-905_revolution_watchdog_next' into next 2013-05-18 15:00:50 +02:00
Alessio Morale
aba64689a6 OP-901 removed stale core_cm3.c file 2013-05-18 14:25:37 +02:00
Corvus Corax
80caceb984 make uncrustify_all;make uncrustify_all; 2013-05-18 14:17:26 +02:00
Alessio Morale
976ad90211 OP-901 Updated F4 CMSIS startup files, Moved USB OTG and USB Device library to common 2013-05-18 14:03:03 +02:00
Alessio Morale
f0c01d0eff OP-901 Updated F4 StdPeriph Driver Library to V1.1.0 2013-05-18 13:57:45 +02:00
Alessio Morale
448e98b336 OP-901 Updated F1 StdPeriph Driver Library to v3.5.0 2013-05-18 13:55:43 +02:00
Brian Webb
bc4f615c25 Adds setting HSE_VALUE on all F1 targets (should only be necessary if the HSE clock is not 8MHz). 
Moves the CMSIS system_stm3210x.c from library.mk to the individual Makefiles for the F1 targets.  This allows for custom SystemInit functions where necessary.
 2013-05-17 22:01:48 -07:00
Alessio Morale
09e241e8bd OP-901 removed old stale files in PiOS folder 2013-05-18 00:25:07 +02:00
Alessio Morale
67e41c34fc Merge remote-tracking branch 'origin/next' into amorale/usb_fixes 2013-05-17 22:46:42 +02:00
Alessio Morale
2735f8a620 OP-901 Updated common CMSIS files 2013-05-17 22:41:34 +02:00
Alessio Morale
13ee42a42a OP-901 Fixed errors due to unused parameter 2013-05-17 22:39:16 +02:00
Alessio Morale
a7460bfd3c OP-954 Fixes for UT 
+review OPReview-470
 2013-05-17 21:51:12 +02:00
Corvus Corax
e0de2083af Merge branch 'next' into corvuscorax/OP-944_EKF-improvements 
Conflicts:
	flight/libraries/insgps13state.c
 2013-05-16 23:29:15 +02:00
Corvus Corax
667f46ceb1 removed non ASCII characters in comment line 2013-05-16 23:21:32 +02:00
Richard Flay (Hyper)
a6aedee9fa Merge branch 'next' into brian/support_inverted_USB_vsense 2013-05-17 05:54:42 +09:30
Richard Flay (Hyper)
031ea3e069 Merge branch 'next' into brian/code_cleanup_130514 2013-05-17 05:49:38 +09:30
Alessio Morale
6ba15ebc53 OP-954 Fixes from review: 
- CopterControl target fix
- tabs in Nakefiles
- Removed duplicate stale settings and clean empty lines in osd Makefile
+review OPReview-470
 2013-05-15 23:18:50 +02:00
Alessio Morale
c80f01dff9 OP-954 Rename the legacy PIOS_INCLUDE_FLASH_SECTOR_SETTINGS to PIOS_INCLUDE_FLASH_LOGFS_SETTINGS 
+review OPReview-470
 2013-05-15 23:16:34 +02:00
Richard Flay (Hyper)
ae14c13195 Merge branch 'next' into hyper/OP-951_add--Wshadow-to-flight-CFLAGS 
Conflicts:
	flight/modules/ManualControl/manualcontrol.c
 2013-05-16 06:28:56 +09:30
Richard Flay (Hyper)
9572a156ce Merge branch 'next' into corvuscorax/o3fixes 2013-05-16 05:56:45 +09:30
Richard Flay (Hyper)
ef5bb6f6fe Merge branch 'next' into OP-950_spi_fixes_FreeRTOS 2013-05-16 05:41:09 +09:30
Brian Webb
156109bb88 Added support for an active low USB vsense line. 2013-05-14 20:37:13 -07:00
Brian Webb
1608d11416 Cleans up some compiler warnings/erros and adds missing ifdefs around some e.g. WDG calls. 2013-05-14 20:22:54 -07:00
Alessio Morale
71cae382ae OP-954 Update OPLink to support the "UAVObject on a specific LogFS instance" updates 2013-05-14 23:54:50 +02:00
Stacey Sheldon
280f537644 f4 usb: ensure that we NAK on unused OUT endpoints 
The ST USB code will automatically receive on any
endpoint that is opened but not in the NAK state.
Make sure we set OUT endpoints to NAK initially.

It also happily writes via a NULL pointer in ep->xfer_buff
which writes to address 0x0000_0000.  Since address
0x0 is aliased onto the internal flash by the BOOT0/1 pins
and the internal flash is (normally) in the LOCKED state,
this write puts the internal flash into an errored state.

This errored state means that writes to internal flash
are no longer allowed and all further writes fail.
 2013-05-14 23:50:17 +02:00
Alessio Morale
07af6b5c80 Added LogFS support for OPLinkMini with internal flash 2013-05-14 23:00:45 +02:00
Alessio Morale
8d57d8ff76 Internal flash settings for F1 
Conflicts:
	flight/pios/stm32f10x/pios_flash_internal.c
 2013-05-14 22:58:05 +02:00
sambas
da23fd6784 Added F1 internal flash driver 
Conflicts:
	flight/pios/stm32f10x/pios_flash_internal.c

Conflicts:
	flight/pios/stm32f10x/pios_flash_internal.c
 2013-05-14 22:56:12 +02:00
Alessio Morale
707e648457 OP-905: Fixes. Prevent LogFS from triggering watchdog 2013-05-14 18:43:39 +02:00
Alessio Morale
742ea6f6b8 Merge branch 'amorale/OP-905_revolution_watchdog' into next 
Conflicts:
	flight/targets/RevoMini/System/pios_board.c
 2013-05-14 18:42:02 +02:00
Richard Flay (Hyper)
ed68fbe68d OP-951: Adds -Wshadow to flight CFLAGS and fixes resulting compilation breakage. 
+review OPReview
 2013-05-14 07:01:45 +09:30
Alessio Morale
ff16dd03e7 Merge branch 'amorale/OP-938_ah_improvements' into next 
Conflicts:
	flight/modules/AltitudeHold/altitudehold.c
	flight/modules/ManualControl/manualcontrol.c
 2013-05-13 23:30:46 +02:00
Oleg Semyonov
e5970ed25d logfs: fix unit tests (requires MIN declaration from pios_math.h) 2013-05-12 03:51:00 +03:00
Alessio Morale
30b755b7aa OP-901 fixed errors due to unused parameter and applied fix against fifo empty bug on usb_dcd_int.c 2013-05-11 23:49:52 +02:00
Alessio Morale
95a3e99b7c OP-901 updated STM32 USB OTG Driver (updated configuration) 2013-05-11 23:12:14 +02:00
Alessio Morale
24fcea168c OP-901 Updated STM32F4 USB Device Library 2013-05-11 23:12:13 +02:00
Alessio Morale
ccc24d844a OP-901 updated STM32 USB OTG Driver 2013-05-11 23:10:47 +02:00
lilvinz
1016b08b70 f4 usb: removed DCD_EP_Flush on endpoint TX 
This has probably caused the problem that prevented tx after
a bus reconnection.
 2013-05-11 22:41:05 +02:00
Alessio Morale
535b53cb1c Raised priority for USB interrupt to high, changed subriority to 0 (PriorityGroup is 0) 2013-05-11 22:41:05 +02:00
Stacey Sheldon
441e9e7b84 f4 usb: always init HID and CDC devices 
This is required so that we can always respond to HID and
CDC requests via the control endpoint (ep0).  The F1/F3
implementation gets away with disabling these interfaces
because all of the ep0 handling is in the usbhook code
rather than (properly) split out into class-specific
drivers like it is done on the F4 implementation.

Conflicts:
	flight/targets/DiscoveryF4/System/pios_board.c
	flight/targets/FlyingF4/System/pios_board.c
	flight/targets/Freedom/System/pios_board.c
	flight/targets/Quanton/System/pios_board.c
 2013-05-11 22:41:04 +02:00
Stacey Sheldon
0d8fe83dca usb cdc: advertise support for line coding and serial state 
The CDC descriptor was not advertising support the the line
coding and serial state messages.  This was preventing Mac
from sending the SetControlLineState message to indicate
that a DTE (ie terminal program) was present and reading
from the serial port.

We support (and depend on) the DTE indication now so this
was making CDC not work on Mac.

Linux seems to provide the indication regardless of whether
it is advertised in the descriptor or not.
 2013-05-11 22:41:03 +02:00
Stacey Sheldon
0e0571149b f4 usb: ensure that we NAK on unused OUT endpoints 
The ST USB code will automatically receive on any
endpoint that is opened but not in the NAK state.
Make sure we set OUT endpoints to NAK initially.

It also happily writes via a NULL pointer in ep->xfer_buff
which writes to address 0x0000_0000.  Since address
0x0 is aliased onto the internal flash by the BOOT0/1 pins
and the internal flash is (normally) in the LOCKED state,
this write puts the internal flash into an errored state.

This errored state means that writes to internal flash
are no longer allowed and all further writes fail.
 2013-05-11 22:41:03 +02:00
Stacey Sheldon
565de5fd4e f4 usb: ensure correct interface numbers for BL and FW 
The interface numbers differ for the HID interface between
the BL and FW.  This is required to keep windows happy.

In HID+CDC, the CDC interfaces must come first with HID last
which makes it #2.  In HID only mode, we can't use #2 for HID
since windows doesn't like the first/only interface to be
anything other than #0.

Conflicts:
	flight/targets/board_hw_defs/discoveryf4/board_hw_defs.c
	flight/targets/board_hw_defs/flyingf4/board_hw_defs.c
	flight/targets/board_hw_defs/freedom/board_hw_defs.c
	flight/targets/board_hw_defs/quanton/board_hw_defs.c
 2013-05-11 22:41:02 +02:00
Stacey Sheldon
2165a5afe1 f4 usb hid: handle SET_IDLE request 
The code doesn't do anything useful with the SET_IDLE
but this helps to keep the wireshark USB traces clean
so that the real errors stand out better.
 2013-05-11 22:41:02 +02:00
Stacey Sheldon
c22daec1b0 usb cdc: avoid need for ZLP by using tx buffers smaller than max 
USB CDC uses BULK endpoints to send/receive data.  Typically,
a USB host will enqueue large buffers on its IN (device-to-host)
URBs.  These buffers are larger than the max packet size for the
bulk endpoint.

The USB standard requires that an IN transfer ends when one of
these is true:
 * a short packet (ie. less than max packet size) is sent by the
   device
 * a zero length packet (ZLP)
 * enough packets that the entire host buffer is filled

Our device implementation never sends ZLPs.  We sometimes send
packets that are exactly max-packet-size bytes long.  This would
result in partially filling a host buffer without signalling (via
ZLP) that the transmission had finished.  The host would then wait
until the next transfer had taken place before processing the first
data, thus delaying the first data.

This change simply forces all of our transfers to be short packets
and avoids the need to worry about zero length packets.  This is
at the cost of some efficiency on the host side since its large
buffers will only ever be partially filled.

Conflicts:
	flight/PiOS/STM32F30x/pios_usb_cdc.c
 2013-05-11 22:41:01 +02:00
Stacey Sheldon
366c573bab f4 usb hid: send correct report ID in dummy report 
The desired report ID is in the LSB of the wValue field,
not the MSB.  This will now send the correct report ID
back to the host.
 2013-05-11 22:41:01 +02:00
Stacey Sheldon
232f9b2f8f f4 usb hid: use static data for dummy report Tx 
This code was previously passing a pointer to stack
data into PIOS_USBHOOK_CtrlTx() which may be sending
this data asynchronously.  Now pass a pointer to
static data so that the asynchronous send doesn't
tx random stack contents.
 2013-05-11 22:41:00 +02:00
Stacey Sheldon
859734af98 f4 usb: fix tracking of OUT requests with data stages 
This code was mistakenly tracking the IN (device-to-host)
requests with data stages.  It should have been tracking
the OUT (host-to-device) requests with data stages.

This tracking data is important now that CDC is supported.
CDC actually uses OUT requests with data stages whereas HID
does not.  This bug only triggered once CDC was enabled.
 2013-05-11 22:41:00 +02:00
Stacey Sheldon
b56f5206bd com/usart/cdc: ensure that device structs are memset before use 
CDC and USART device drivers were not all clearing their
device structs before using them.

This specifically caused crashes in the case where the upper
COM layer was binding only a Tx path.  The Rx path callback
in the lower driver was uninitialized random data and would
result in the lower driver faulting when it tried to call the
callback.

Conflicts:
	flight/PiOS/STM32F30x/pios_usart.c
	flight/PiOS/STM32F30x/pios_usb_cdc.c
	flight/PiOS/STM32F30x/pios_usb_hid.c
 2013-05-11 22:40:59 +02:00
Stacey Sheldon
e16be98224 usb cdc: ensure com buffer is drained when no DTE is attached 
The CDC layer on F1, F3 and F4 now always acts like an
infinte data sink whenever *either* there is no DTE present
(ie. no terminal program listening) *or* the USB cable is
disconnected.

F1 and F4 were previously checking the cable but not the DTE.
F3 didn't check anything.  The COM layer didn't even ask the
lower layers.

All of this used to mean that any time a caller did a blocking
send to a CDC device without a DTE, it would eventually block
for up to a 5s timeout waiting for space in the Tx buffer.

Conflicts:
	flight/PiOS/STM32F30x/pios_usb_cdc.c
 2013-05-11 22:40:58 +02:00
Stacey Sheldon
c702ca0f1b usbhook: fix up indentation 
No functional changes.
 2013-05-11 22:40:57 +02:00
Stacey Sheldon
cb6f4a474e f4 usb: ensure data buffers are 4-byte aligned 
4-byte alignment is required for DMA.
 2013-05-11 22:40:56 +02:00
Stacey Sheldon
9cc70695d7 f4 usb cdc: add support for USB CDC to RevoMini 
Conflicts:
	flight/targets/RevoMini/System/inc/pios_config.h
	flight/targets/RevoMini/System/pios_board.c
 2013-05-11 22:40:56 +02:00
Stacey Sheldon
c6e893e1e5 usb: fix interfaces in USB HW defs for OSD 2013-05-11 22:38:28 +02:00
Stacey Sheldon
207bd671ac usb: fix interfaces in USB HW defs for RevoMini 2013-05-11 22:38:27 +02:00
Stacey Sheldon
f4bed187f4 f4 usb cdc: implement CDC class driver for STM32 F4 SoCs 2013-05-11 22:38:26 +02:00
Stacey Sheldon
19714d2316 f4 usb: allocate TX FIFO RAM for endpoints 2 and 3 
This is required to support USB CDC mgmt and data
endpoints.
 2013-05-11 22:38:25 +02:00
Stacey Sheldon
02addaf4a0 usbhook: make ctrl endpoint OUT treat request as const 
The req parameter is passed to the OUT stage as a convenience.
Since the OUT callback is called *after* the transfer has occurred,
modifying the req would have absolutely no effect.  Marking this
as const makes this expectation clear.
 2013-05-11 22:38:25 +02:00
Stacey Sheldon
590feefd9b f1 usb cdc: ensure uart state is transmitted on control endpoint 
Previously, the IN stage on the CTRL interface would write (and
send) its data via the buffer owned by the DATA endpoint.  This
would probably have overwritten any data being sent at that
moment.  This may have caused data corruption from FC -> GCS.
 2013-05-11 22:35:19 +02:00
Alessio Morale
d555bd0673 Uses Internal flash for system settings storage repourposing external flash for "User" storage 2013-05-11 22:06:30 +02:00
Alessio Morale
511283c608 Flash internal: writes optimization using 4 bytes parallelism 2013-05-11 22:04:47 +02:00
Alessio Morale
687e75b2e2 Changes to board specific files to support UAVObject on a specific LogFS instance 2013-05-11 17:15:07 +02:00
Alessio Morale
aefda3b560 Changes to UAVObjectManager to explicitly specify the logfs instance to be used 2013-05-11 17:13:11 +02:00
Richard Flay (Hyper)
04f59d5910 OP-950: Adds "higher priority task woken" logic to SPI and SPI bus resident 
sensor device drivers. Based partly on code contributed by lilvinz.

+review OPReview
 2013-05-11 16:18:34 +09:30
Corvus Corax
336a50f7e4 dynamic is better than static 2013-05-11 02:02:04 +02:00
Corvus Corax
92d73e0e73 keep on stack for now 2013-05-11 01:56:57 +02:00
Corvus Corax
e3147eed1a some changes as suggested in review 2013-05-11 01:33:56 +02:00
Corvus Corax
0a3b59ddea ManualControl: Initialize scaledChannel to 0, - required to not fail compilation with -O3 (GCC claims about potentially uninitialized use) 2013-05-10 20:23:16 +02:00
Corvus Corax
b76df471ee bugfix on revo proto. STM32F4 A revision has a hardware bug and cannot do flash prefetching properly 2013-05-10 19:53:51 +02:00
Werner Backes
7c9d2ce9a5 Merge branch 'D-Lite/OP-934_rfm22b_rcvr_timeout_handling_next' into next 2013-05-10 09:59:30 +02:00
Corvus Corax
c5cbbf1c19 OP-944 : Improve Extended Kalman Filter generic formula to work roughly as fast as the auto generated code, remove autogenerated code. 2013-05-09 21:26:35 +02:00
Richard Flay (Hyper)
cf14608ebe Merge branch 'next' into hyper/OP-936_task-monitor-rework 2013-05-09 19:25:02 +09:30
Stacey Sheldon
c6485a134c logfs: load/save UAVOs to specific logfs partition 
Now that multiple filesystem partitions are supported,
the UAVO manager needs to be specific about which partition
to load/save its objects to.

Conflicts:
	flight/targets/CopterControl/System/pios_board.c
	flight/targets/DiscoveryF4/System/pios_board.c
	flight/targets/FlyingF3/System/pios_board.c
	flight/targets/FlyingF4/System/pios_board.c
	flight/targets/Freedom/System/pios_board.c
	flight/targets/Quanton/System/pios_board.c
	flight/targets/RevoMini/System/pios_board.c
	flight/targets/Revolution/System/pios_board.c
	flight/uavobjects/uavobjectmanager.c
 2013-05-08 20:06:32 +02:00
Stacey Sheldon
4f9ce60930 ut logfs: add support for testing a 2nd partition 2013-05-08 19:42:12 +02:00
Stacey Sheldon
8ab50bca13 flashfs: use uintptr_t instead of uint32_t in flashfs API 2013-05-08 19:42:01 +02:00
Stacey Sheldon
99e61dd617 logfs: support multiple instances of logfs 
Conflicts:
	flight/pios/common/pios_flashfs_logfs.c
	flight/pios/inc/pios_flashfs_logfs_priv.h
	flight/tests/logfs/pios.h
	flight/tests/logfs/pios_config.h
	flight/tests/logfs/unittest.cpp
 2013-05-08 19:28:11 +02:00
Alessio Morale
93bad2e8c2 Merge branch 'amorale/OP-917_f4_bootloader_updater' into next 
***** PLEASE NOTE  ***** From this revision all F4 based boards (Revolution/OSD) needs bootloader version  5 to boot properly

Conflicts:
	flight/pios/stm32f4xx/libraries/CMSIS2/Device/ST/STM32F4xx/Source/osd/system_stm32f4xx.c
	flight/targets/boards/osd/board-info.mk
	make/boot-defs.mk
	make/common-defs.mk
 2013-05-07 21:02:41 +02:00
Werner Backes
cc38ba0bdb Revert 8fa793 because it's obsoleted by 938ed5. 2013-05-06 14:26:25 +02:00
Werner Backes
938ed58918 Corrected timout calculation formula. 2013-05-06 14:20:53 +02:00
Werner Backes
bb87e6390e Update ppm_fresh if we receive a new PPM packet in order to keep the 
rfm22b receiver supervisor happy.
 2013-05-06 12:00:58 +02:00
Richard Flay (Hyper)
fbc8bc698f OP-936: Merges branch 'next' into hyper/OP-936_task-monitor-rework, fixes damage/conflicts, 
and brings the callback scheduler into the fold.

+review OPReview-461
 2013-05-06 19:11:14 +09:30
Werner Backes
0005d643ca Merge branch 'D-Lite/OP-934_rfm22b_rcvr_timeout_handling' into D-Lite/OP-934_rfm22b_rcvr_timeout_handling_next 2013-05-06 08:23:22 +02:00
Brian Webb
ae8286e99a OP-932: Fixes a bug that was preventing setting of Tx power on remote modem. 2013-05-06 01:03:15 +01:00
Corvus Corax
39fe6beb4b Merge branch 'corvuscorax/Attitude-fixes' into next 
Conflicts:
	flight/libraries/insgps13state.c
	flight/modules/Attitude/revolution/attitude.c
 2013-05-05 23:09:07 +02:00
Corvus Corax
e0a6dae46a made "fake" variances set in indoor mode and used for airspeed hack come from UAvObject 2013-05-05 18:19:43 +02:00
Corvus Corax
946105cbe3 Merge branch 'next' into corvuscorax/Attitude-fixes 2013-05-05 17:44:59 +02:00
Alessio Morale
5a2c53804f OP-917 Make reboot over telemetry link works. UserDFU timeouts to the user application when no USB connection is found. 
+review OPReview-456
 2013-05-05 15:15:44 +02:00
Richard Flay (Hyper)
a2d8544931 OP-931: adds -Wextra compiler option for the flight code, and makes the bazillion code changes required 
to make the flight code compile again. Needs careful review, particularly all the fixes for the
signed vs unsigned comparisons.

+review OPReview-459
 2013-05-05 16:32:24 +09:30
Alessio Morale
1e5ce7a5fb OP-938 Add programmable EXP and max full throttle climb/descent rate 2013-05-04 18:50:19 +02:00
Brian Webb
dc4455ff68 OP-932: Fixes a bug that was preventing setting of Tx power on remote modem. 2013-05-04 17:24:40 +01:00
Brian Webb
d7ca77b996 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into OP-932-Modularize_Radio_Driver 2013-05-04 16:50:20 +01:00
Brian Webb
57552f4cc9 OP-932: Changed the clock syncronization to happen only on packts transmitted from the coordinator to the remote modem. The Tx finished time of the previous packet is now sent in the packet header. This is compared to the Rx complete time of that packet on the remote modem to calcualte the difference between two modems. This eliminates the need for ACKing, so ACKs were removed for PPM and status packet. 2013-05-04 16:50:08 +01:00
Richard Flay (Hyper)
5b61466259 OP-931: Adds -Wdouble-promotion compiler option and fixes problems that the compiler then identifies. 
+review OPReview-459
 2013-05-04 19:24:01 +09:30
Richard Flay (Hyper)
7f273bd9e6 Fixes recent, but broken, commit of fix for OP-754. Bunny is bad. 2013-05-04 11:30:39 +09:30
Richard Flay (Hyper)
87fcf9fa8b Merge branch 'next' into hyper/OP-931_extra_compiler_warnings and update as necessary. 
Hopefully properly fixes conflicts:
	flight/modules/Attitude/attitude.c
	flight/modules/ManualControl/manualcontrol.c
	flight/modules/Osd/WavPlayer/wavplayer.c
	flight/modules/Osd/osdgen/osdgen.c
	flight/modules/System/systemmod.c
	ground/uavobjgenerator/generators/flight/uavobjectgeneratorflight.cpp
 2013-05-04 11:12:44 +09:30
Brian Webb
33cb06b1b0 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into OP-932-Modularize_Radio_Driver 2013-05-04 01:30:01 +01:00
Richard Flay (Hyper)
576d33464a OP-754/OPReview-374: Applied a very old patch, provided by cyr, to the latest next branch. 2013-05-04 09:10:02 +09:30
Alessio Morale
c88c0e03a8 OP-938 Reduce deadband to +/-10% around 0 2013-05-03 22:32:23 +02:00
Alessio Morale
1c3fb70ab1 OP-629 Block arming on all navigation based modes 
Conflicts:
	flight/modules/ManualControl/manualcontrol.c
 2013-05-03 22:32:23 +02:00
Alessio Morale
976999eba0 OP-938 Add an "Exp" to throttle stick when in AH to make it useable 
Conflicts:
	flight/modules/ManualControl/manualcontrol.c
 2013-05-03 22:32:23 +02:00
Alessio Morale
9f65409c5a OP-938 Stop AH from running when board is not armed 2013-05-03 22:32:23 +02:00
Oleg Semyonov
137ddbf73a Fix broken unit tests 2013-05-03 20:27:03 +02:00
Oleg Semyonov
7aa59f4573 pios.h: only include STM32xxx.h if particular STM32 MCU is defined 2013-05-03 20:25:48 +02:00
Brian Webb
38cd0e1c46 OP-932: Fixes configuration of the remote serial connection when using VCP/raw comms. 2013-05-03 14:46:14 +01:00
Brian Webb
12e8adbdc4 OP-932: Fixes vitual com port and (not tested) raw comms over a UART on the OPLink. 2013-05-03 14:46:01 +01:00
Brian Webb
84a0f981e0 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into OP-932-Modularize_Radio_Driver 2013-05-03 14:08:40 +01:00
Richard Flay (Hyper)
0178d666d5 OP-931: Fixes the mag_updated test in revo Attitude module to use the square of the Be vector magnitude. 
Also fixes the dT calculation issues in a few places, one of which was as suggested in OPReview-459.

+review OPReview-459
 2013-05-03 19:24:54 +09:30
Corvus Corax
5d5a3389c4 missed removal of unneeded update chec 2013-05-03 02:48:06 +02:00
Corvus Corax
25c58ff074 Put all EKF initialisation values in a separate UAVObject EKFConfiguration, 
adapted insgps13state.c/.h,
modules/Attitude/revolution,
configrevowidget.cpp,
accordingly.
 2013-05-03 02:17:44 +02:00
Richard Flay (Hyper)
84e1a81f8b OP-936: Moves the task monitor code out of the flight library and into PiOS. 
This move and rework also breaks the dependency of the task monitor on the UAVO subsystem,
and pushes the responsibility for updating the TaskInfo UAVO into the System module.

+review OPReview
 2013-05-03 07:01:14 +09:30
Corvus Corax
48288c740e OP-931: some floating point math fixes, should make merge with other dev branch easier 2013-05-02 22:45:02 +02:00
Corvus Corax
201eed8d8f when testing variances for validity dont allow negative variances 2013-05-02 20:09:57 +02:00
Werner Backes
b48665e59b rfm22b receiver supervisor now properly indicates a timeout condition. 
This allows upper layers to recognize control signal loss.
 2013-05-02 12:57:00 +02:00
Werner Backes
8fa79377c3 Lowered rfm22b_rcvr supervisor timeout. Timeout values above 159 exceed uint8_t 
range during timeout calculation and effectively disable the supervisor.
 2013-05-02 12:56:57 +02:00
Sambas
f7b9223827 Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext 
Conflicts:
	flight/modules/System/systemmod.c
	shared/uavobjectdefinition/taskinfo.xml
 2013-05-02 09:00:12 +03:00
Brian Webb
66b048e280 OP-932: Fixes configuration of the remote serial connection when using VCP/raw comms. 2013-05-02 04:42:16 +01:00
Brian Webb
80cef9dbcc OP-932: Fixes vitual com port and (not tested) raw comms over a UART on the OPLink. 2013-05-02 04:23:26 +01:00
Corvus Corax
467b22f294 I knew I had forgotten something (cos -> cosf ...) 2013-05-01 20:40:50 +02:00
Corvus Corax
ff5fd9c7c9 Safety modification, defer any change to RevoSettings (fusionalgorithm), RevoCalibration, and EKFInitialVariance until the craft has been disarmed! 2013-05-01 20:21:46 +02:00
Corvus Corax
e7dc665c14 Reworked Variance Objects, Setting for initial EKF variance 2013-05-01 19:16:29 +02:00
Corvus Corax
3ef2693dfc use DEG2RAD and RAD2DEG everywhere 2013-05-01 18:16:22 +02:00
Corvus Corax
d77c690fe3 Merge branch 'next' into corvuscorax/Attitude-fixes 
Conflicts:
	flight/modules/Attitude/revolution/attitude.c
 2013-05-01 17:51:05 +02:00
Brian Webb
3b5bec167e Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into OP-932-Modularize_Radio_Driver 2013-05-01 15:30:24 +01:00
Brian Webb
d8b09f132f OP-932: Removes requirement to ACK PPM packets. 2013-05-01 15:28:33 +01:00
Brian Webb
344e5cbb66 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into OP-932-Modularize_Radio_Driver 2013-05-01 14:38:28 +01:00
Brian Webb
8c763c8ed3 OP-932: Improves the timing of channel changes on the radio device. 2013-05-01 14:37:47 +01:00
Corvus Corax
a0ca66b0cd Merge branch 'corvuscorax/delayed_callbacks_with_delay' into next 2013-05-01 15:34:16 +02:00
Oleg Semyonov
7032d2a9d6 Merge remote-tracking branch 'origin/next' into os/uncrustify-config 2013-05-01 13:31:38 +02:00
Oleg Semyonov
654dd051c7 Merge remote-tracking branch 'origin/next' into os/debug-pins 2013-05-01 11:13:30 +02:00
Brian Webb
a7d606dfe9 OP-932: Syncronize start of transmissions using the same coordinated clock as used by FHSS. 2013-05-01 03:46:46 +01:00
Brian Webb
2201d9d2bb OP-932: Continued cleanup and modularization of radio code. Also fixed a bug that held the SPI lock when an error occured in an Rx. 2013-05-01 03:14:35 +01:00
Brian Webb
ef18319306 OP-932: Continued cleanup and modularization of the RFM22B radio code. Low-level radio driver has mostly been split out of the higher-level state machine. 2013-05-01 03:14:23 +01:00
Brian Webb
94cb92f410 OP-932: Additional restructuring of radio code. 2013-05-01 03:14:11 +01:00
Brian Webb
cb24d3266e OP-932: Hold SPI bus semephore through multiple read/write transactions. 2013-05-01 03:13:58 +01:00
Brian Webb
8c59271d48 OP-932: Store the device status in bitfields with meaningful names. 2013-05-01 03:13:48 +01:00
Brian Webb
c3ea1bf3c0 OP-932: Fixed GPIO debugging on RevoMini (both V1 and V2) 2013-05-01 03:13:36 +01:00
Brian Webb
39c6e81d07 OP-924: Ensures that the PPM pulse turns off between PPM frames. 2013-05-01 02:48:48 +01:00