rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-02 10:24:11 +01:00
Code Issues Releases Activity
3,981 Commits 5 Branches 8 Tags 266 MiB
86ce79af1d
Commit Graph

1774 Commits

Author SHA1 Message Date
Mathieu Rondonneau
3780de8d3e OP-423 port to OP (heap2) the previous changes done in CC (heap1) (see c95b199166) 
I managed to test CC with heap2 changes and the init stack claimed back to heap once scheduler starts.

the changes of this commit are OP related (just cleanup on CC side):
Arch specific stuff (in reset vector) to hide this from portable code:
     - switch back to MSP stack before starting the scheduler so that the sheduler can use the IRQ stack (when/if needed).
     - call the C portable function in heap2 to claim some stack back (the number to claim is taken from linker file).
     - start the scheduler from reset vector (I move this here from main because it make sense to not go back to C (so that I don't need to copy the rolled stack in case the sheduler returns). This make it more clean.
     - Also I have added the call to the mem manager if sheduler return. that way, we don't reset indefinitely if memory runs out. We will go to this handler and figure things out (right now, it's just looping but at least not rebooting. Probably trap NMI would be better (later improvement).
 2011-06-14 20:10:53 -07:00
James Cotton
144f36dfb7 Merge branch 'bugfix-flight' 2011-06-14 10:02:55 -05:00
Mathieu Rondonneau
c95b199166 OP-423 do the arch specific stuff (in reset vector) to hide this from portable code: 
- switch back to MSP stack before starting the scheduler so that the sheduler can use the IRQ stack (when/if needed).
 - call the C portable function in heap1 to claim some stack back (the number to claim is taken from linker file).
 - start the scheduler from reset vector (I move this here from main because it make sense to not go back to C (so that I don't need to copy the rolled stack in case the sheduler returns). This make it more clean.
 - Also I have added the call to the mem manager if sheduler return. that way, we don't reset indefinitely if memory runs out. We will go to this handler and figure things out (right now, it's just looping but at least not rebooting. Probably trap NMI would be better (later improvement).

The part missing for this part is the weak attribute for the function in heap1.c so that we don't have to update everything with empty stub.
I think the weak atrribute for C function called in assembly is arch dependent so I am not sure if this is possible (will look into it, maybe somebody outthere nows).
Right now, it's heap1 dependent and won't work with heap2. I will clean that up the next couple of days.

I did some test and it looks good.
this is without init code re-organization so we don't free as much as we will be it's good starts.

This compile with sim_posix (since it does not affect portable code) so this is really clean.
I only tested this with CC. I will port it for OP when I will work on heap2.
 2011-06-13 21:49:17 -07:00
Mathieu Rondonneau
1f54e32ea9 OP-423 also add changes to OP. (I can not test it because I don't have a board so only compile test) 2011-06-13 17:10:14 -07:00
James Cotton
404c026188 Patch from Zippe to use cycle timer for CPU monitoring. 2011-06-13 00:24:30 -05:00
Mathieu Rondonneau
7598e898fa OP-423 Step-1: split system stack and implement water mark for IRQstack: 
- use IRQStack for ISRs (at begening of SRAM) (let's call it the irq stack)
- use end of heap for stack needed during initialization (let's call it the init stack).
- the systemStats in GCS indicate the remaining bytes in the IRQ stack (this is realy usefull to monitor our (nested) IRQs.

This is the base ground to provide as much memory as possible available at task creation time.

Next step is to re-organize the initialization in order to move all the init out of the thread's stacks onto the init stack.
This will provide as much memory as possible available at task creation time.
Basically the stack during initialization will be destroyed once the scheduler starts and dynamic alloc are made (since the init stack is at the end of the heap). We will need to make sure we don't clobber the heap during initialization otherwise this will lead to stack corruption.
 2011-06-12 20:23:00 -07:00
James Cotton
0f5fe54329 FlashFS: Should clear the 0 sector when wiping flash chip, not 10 bytes in. 2011-06-11 22:31:51 -05:00
Oleg Semyonov
5d0c7fe42e Merge branch 'master' into heli_improvements 2011-06-11 12:19:07 +03:00
Corvus Corax
a7841a523a bugfix: forgot to add header file (pios.posix) 2011-06-10 22:04:54 +02:00
Corvus Corax
47a6643318 PiOS.posix: ported PiOS_CRC to PiOS.posix to fix compilation error on OpenPilot introduced by new dependency 2011-06-10 17:16:15 +02:00
James Cotton
4a59c03b0e OP-493: Unfortuantely have to change stack alarms for this to work :( 2011-06-07 10:31:40 -05:00
James Cotton
bdc9094975 OP-493 OP-505 OP-511: Make up to 6 accessory channels so some can go from 
ManualCommand to a camera module and some could go from that camera module to
output (i.e. mixing of inputs to pan tilt with stabilization)
 2011-06-06 10:56:31 -05:00
James Cotton
1ecd244aff OP-493 OP-505 OP-511: Fixed bug with the direct mapping where it looked at throttle curve 
source instead of directly bypassing
 2011-06-06 10:53:55 -05:00
James Cotton
6c6906d61e OP-493: Switch to using Accessory0:2 to match the InstId 2011-06-05 15:38:58 -05:00
James Cotton
99b3a629a8 OP-493: Force three AccessoryDesired objects to always exist. Routing to 
Mixing channel now works.  However Accessory desired instances do not show up
in GCS.
 2011-06-05 15:38:58 -05:00
James Cotton
a1336e4d03 OP-493: Make sure accessory desired is not a single instance object 2011-06-05 15:38:57 -05:00
James Cotton
8ebd6a83d6 OP-493: Add support to bypass the mixer and route accessory data straight to 
outputs.  Warning: This has no failsafes like arming.  We should discuss if
this is appropriate.

In addition accessory objects can be routed throught the mixer for collective
or flaperon.
 2011-06-05 15:38:57 -05:00
James Cotton
a1d60cb77d OP-493: Use multiple instances when using multiple accessory channels 2011-06-05 15:38:57 -05:00
James Cotton
1365542103 OP-493: Populate the Accessory Desired from TX 2011-06-05 15:38:57 -05:00
James Cotton
4f47c06547 Merge branch 'saving_crc' into bugfix-flight 2011-06-05 15:37:44 -05:00
James Cotton
624baeda5c Merge branch 'OP-423_Mathieu_GetSet_Uavobjects' into bugfix-flight 2011-06-05 09:48:22 -05:00
James Cotton
0a56129b35 OP-452: Made the CRC calculation run in chunks to balance efficiency and ram 
usage, because Stac caught me being lazy :)
 2011-06-05 09:05:59 -05:00
James Cotton
56faad594e OP-423: Make sure to unlock semaphore before returning from error condition 2011-06-05 08:41:21 -05:00
James Cotton
599483d5ac OP-152: Save CRC for object and header into flash and only load object if CRC 
matches.  Read the flash first bytewise to compute CRC instead of buffering
which is more RAM efficient but very inefficient as it sets up many one byte
SPI transfers.

Also incremented the filesystem magic flag to trigger an automatic flash wipe
on this upgrade.
 2011-06-04 18:36:38 -05:00
James Cotton
3e5d02cbaf OP-152: Abstract the CRC code out of uavtalk to allow it to be reused (PT - 
feel free to test moving this to the hardware CRC unit)
 2011-06-04 18:36:26 -05:00
dankers
3013a092d9 Merge branch 'OP-519_Mathieu_Upgrade_FreeRTOS' into bugfix-flight 2011-06-04 16:42:15 +10:00
Mathieu Rondonneau
7b8d09371b fixing minor compiler error/warnings when compiling OP with DEBUG=NO 2011-06-03 21:47:43 -07:00
Mathieu Rondonneau
31a06a5ae7 OP-423 add set/get uavobjects functions to access objects fields separately. 2011-06-02 21:18:34 -07:00
Mathieu Rondonneau
6e64a546df Remove un-used code 2011-06-02 20:21:26 -07:00
Mathieu Rondonneau
071a684248 OP-519 upgrade to FreeRTOS-7.0.1 
- only affect flight/PiOS (no change for posix and win32)
- tested on recent master (some runtime on CC with GCS)
- the new timer feature is not compiled-in since we don't use it yet.
- NO TEST FLIGHT
 2011-06-01 21:46:28 -07:00
Oleg Semyonov
f770870af7 Merge branch 'bugfix-flight' 2011-06-01 14:53:31 +03:00
Oleg Semyonov
6e418735cf OP-509: fix for ld symbol reference (also fixes build with 4.5.2 gcc) 2011-06-01 00:31:27 +03:00
James Cotton
efe50012cb Merge branch 'spektrum_rtc_supervisor' 2011-05-29 17:19:48 -05:00
sambas
17fb31a7fa Spektrum rtc supervisor working, tested on CC and all outputs are activated. Needs review and testing before merge. 2011-05-29 14:52:22 +03:00
sambas
86d02e2d34 Merge branch 'master' of ssh://git.openpilot.org/OpenPilot into spektrum_rtc_supervisor 2011-05-29 10:40:17 +03:00
Stacey Sheldon
5be27fda83 coptercontrol: Increase stack size for system module 
When running flight software from master (cf74908), my
config was pushing the system module stack usage to within
16 bytes of its limit.  This triggers a stack overflow
alarm which prevents the quad from arming/flying.

This change increases the available stack size such
that there are 72 bytes of stack free (a previously stated
safe margin) when my quad is sitting idle and unarmed on
the bench.
 2011-05-29 00:12:26 -04:00
Stacey Sheldon
ac0eb3a5c7 Merge remote branch 'origin/stac_build-opf-image' 2011-05-26 21:29:53 -04:00
James Cotton
66b85acebd Merge branch 'bugfix-flight' 2011-05-26 20:07:58 -05:00
James Cotton
4bc763dafc Extend PiOS DELAY to allow querying the time value in uS 2011-05-26 12:19:04 -05:00
Oleg Semyonov
36d2a467e0 manualcontrol: fix copy/paste error 2011-05-26 00:16:36 +03:00
Stacey Sheldon
4da671fc82 build: change firmware files from .opf to .opfw extensions 2011-05-25 00:20:02 -04:00
Oleg Semyonov
66804076b8 build: fix release/Makefile for *.opf files and changed targets 2011-05-24 23:49:51 -04:00
Stacey Sheldon
8bd08e381a build: add support for EE bank on pipx boards 
The pipxtreme boards use a sector of the on-board flash
for configuration storage.  Adjust the memory maps to
reflect this.

The board_info_blob is also extended to include the EE
bank definitions.  This should be used by the pipxtreme
firmware rather than determining it based on chip size.
 2011-05-24 01:10:40 -04:00
Stacey Sheldon
91cb294730 build: remove redundant PHONY for size target 2011-05-24 01:10:40 -04:00
Stacey Sheldon
0eb92fad91 build: refactor jtag program and add jtag wipe target 
Macros for JTAG program and wipe for each target are now
provided in firmware-defs.mk.

The _wipe target for each firmware and bootloader image will
erase either the bootloader (bl_*_wipe) or firmware (fw_*_wipe)
bank.
 2011-05-24 01:10:31 -04:00
Stacey Sheldon
9973fda23b build: define bootloader and firmware bank spans 
The board-info.mk files now define the start and size
of the bootloader and the firmware banks.
 2011-05-24 01:03:01 -04:00
Stacey Sheldon
504fe7a664 dfu: fix typo WRITABLA -> WRITABLE 2011-05-24 00:58:10 -04:00
Stacey Sheldon
96827eecff build: Make all flight sw use pios_board_info_blob 
Now that every bootloader build has a board info blob,
make all fw and bl images use it.

The following MACROS are removed:
  BOARD_TYPE, BOARD_REVISION, BOOTLOADER_VERSION,
  START_OF_USER_CODE, HW_TYPE

These values are now ONLY available from the bootloader
flash via the pios_board_info_blob symbol.  These values
must not be #defined or otherwise hard-coded into the
firmware in any way.  The bootloader flash is the only
valid source for this information.

NOTE: To ensure that we have an upgrade path from an
      old bootloader (without board_info_blob) to a
      new bootloader (with board_info_blob), it is
      essential that the bu_* targets do not depend
      on (or validate) the board_info_blob being present
      in the bootloader flash.
 2011-05-24 00:58:10 -04:00
Stacey Sheldon
2d47427b05 link: Use alternate declaration of pios_board_info_blob 
Make use of a shorter notation to allow the linker to provide
the correct address for pios_board_info_blob.
 2011-05-23 18:21:42 -04:00
Stacey Sheldon
6e406c0232 build: remove all remaining use of -DUSE_BOOTLOADER 
The USE_BOOTLOADER compile flag was only being used
to determine where the ISR vector table was located.

Provide this explicitly from the linker since it knows
exactly where it is putting the ISR vector table.
 2011-05-23 18:21:42 -04:00
Stacey Sheldon
0a67730d0f build: refactor fw, bl and bu rules 
- New macros for fw, bl and bu rules in top-level make
- Per-board info factored into make/board/*/board-info.mk
- Per-board info now shared btw. fw, bl and blupd for each board
   - BOARD_TYPE, BOARD_REVISION, BOOTLOADER_VERSION, HW_TYPE
   - MCU, CHIP, BOARD, MODEL, MODEL_SUFFIX
   - START_OF_BL_CODE, START_OF_FW_CODE
- blupd_* goals renamed to bu_*
- all_blupd goal renamed to all_bu
- firmware goals renamed to fw_*, board name goals are preserved
- bu_*_program now writes updater to correct address for all boards
- BL updater firmware builds now produce .opf format including
  version info blob.
- BL updater firmware name now includes board name.
- INS makefile brought up to date w.r.t. linker scripts
 2011-05-23 18:21:42 -04:00
Stacey Sheldon
6ec6425f5e build: build opf images including firmware + version blob 2011-05-22 10:55:13 -04:00
James Cotton
460cc1adc9 Merge remote-tracking branch 'origin/stac_add-bootloader-info-blob' 2011-05-19 16:08:58 -05:00
James Cotton
dd1e10a15d PiOS/Spektrum: Start swapping to using RTC and calls to PIOS_Spektrum_Get() to 
monitor when call Spektrum watchdog
 2011-05-18 01:46:00 -05:00
James Cotton
bdf862a712 PIOS/RTC: Add functions to get the rate. Also changed Start to Init to be more 
consistent with pios.
 2011-05-18 01:45:21 -05:00
dankers
5f32803763 Changed accelKp = 1; in 3C filter when calibrating bias when arming. Increase default yaw by 0.005 2011-05-17 04:15:28 +10:00
Stacey Sheldon
2044d777e6 coptercontrol: always enable -g debug symbols 
This does not affect the size of the image or the RAM
used by the firmware image.  All debugging symbols are
stripped from the elf file during the conversion to a
.bin file.
 2011-05-16 08:35:41 -04:00
Stacey Sheldon
575010169a build: add pios_board_info_blob struct to bootloader flash image 
The board info blob is stored in the last 128 bytes of the
bootloader's flash bank.  You can access this data from the
application firmware like this:
  #include <pios_board_info.h>

  if (pios_board_info_blob.magic == PIOS_BOARD_INFO_BLOB_MAGIC) {
    /* Check some other fields */
  }

DO NOT link pios_board_info.c into your application firmware.
Only bootloaders should provide the content for the board info
structure.  The application firmware is only a user of the data.
 2011-05-16 08:30:30 -04:00
Oleg Semyonov
39d4f23b67 Merge branch 'master' into OP-483_os_release-packaging 2011-05-15 21:32:20 +03:00
James Cotton
ae2759a957 Merge branch 'bugfix-flight' 2011-05-15 12:50:45 -05:00
James Cotton
eb2d094a66 Merge branch 'OP-499_216_Saving' 2011-05-15 10:09:29 -05:00
dankers
71d582495e On arm bias calibration terms now matches boot calibration terms 2011-05-16 00:16:19 +10:00
James Cotton
886f36dca1 Merge branch 'master' into OP-499_216_Saving 2011-05-15 03:58:30 -05:00
James Cotton
feb9c02780 OP-216: Small typo in flashfs code (thanks Zippe) 2011-05-15 00:18:15 -05:00
Oleg Semyonov
0005729056 OP-500: fix PyMite dependencies on autogenerated files 
This is done by separating PyMite-dependent sources and making them
dependent on autogenerated python code. This was tested with make -j
on Windows and worked fine. It failed with errors otherwise:

In file included from ../Libraries/PyMite/vm/class.c:28:
../Libraries/PyMite/vm/pm.h:198: fatal error: pmfeatures.h: No such file or directory
 2011-05-15 04:14:17 +03:00
James Cotton
b01e897e36 Merge branch 'OP-488_NeverHaltWhileArmed_James' 2011-05-14 17:21:05 -05:00
James Cotton
d312e876c4 OP-216: Some small bugs where things were stored 2011-05-14 16:11:30 -05:00
Oleg Semyonov
bac95dae11 OP-483: get rid of -D install switch (doesn't work on Mac) and use mkdir -p instead 2011-05-14 23:17:08 +03:00
James Cotton
d883c8af9f Whitespace and line endings 2011-05-14 15:15:33 -05:00
James Cotton
934addfdcc OP-216: Silly typo 2011-05-14 15:11:33 -05:00
dankers
84e09031a7 Faster attitude calc, be much more aggressive with working out bias. 
Change AccelkP to 0.05 to give accels more influence, just balacing out the 3C filter.

Change stab setting to be a better default fopr most Quads.
 2011-05-15 05:58:58 +10:00
James Cotton
c689d97961 OP-216: Improved error handling 2011-05-14 14:28:11 -05:00
James Cotton
0438f5cf66 OP-216: Check for existence of file table in flash and wipe sector and create 
it if missing.
 2011-05-14 14:23:23 -05:00
James Cotton
2087441006 OP-216: Make the object manager use new flash fs for objects 2011-05-14 14:23:02 -05:00
James Cotton
7e6e7bb391 OP-499 OP-216: Simple list of objects saved in flash to prevent objId 
collision.  Note, this will wipe ALL your settings.
 2011-05-14 14:05:02 -05:00
zedamota
a38fbe6cea Make CopterControl firmware non functional when using the ERASE_FLASH=YES compile flag 2011-05-14 19:03:31 +01:00
dankers
52fd23a3b9 Merge remote-tracking branch 'origin/bugfix-flight' 2011-05-14 00:28:42 +10:00
dankers
8e436eb2ac Merge remote-tracking branch 'origin/bugfix-flight' 2011-05-14 00:28:19 +10:00
James Cotton
dbf8a77a94 Now there are other attitude settings (like rotation angle) make sure these are 
loaded right away at power up
 2011-05-13 07:24:44 -05:00
Oleg Semyonov
a7833e0120 OP-483: add install target for bootloader updater 2011-05-13 11:25:35 +03:00
Oleg Semyonov
45c609100a OP-483: add install target for bootloaders 2011-05-13 11:25:33 +03:00
Oleg Semyonov
37868a4c10 OP-483: add install target for firmware 
make INSTALL_DIR=dir INSTALL_PFX=pfx INSTALL_SFX=sfx install
installs binary file into specified install directory adding
optional prefix and/or suffix.
 2011-05-13 11:25:32 +03:00
Oleg Semyonov
bf8939eb30 OP-483: cleanup: remove unneeded test.bin from BootloaderUpdater 2011-05-13 11:25:30 +03:00
James Cotton
3d5244c4b8 Fix small typo THRSHOLD to THRESHOLD in gps.c 2011-05-12 18:57:16 -05:00
James Cotton
612cd4ff55 Merge branch 'bugfix-flight' 2011-05-11 20:10:38 -05:00
James Cotton
338d363289 When a channel is disabled in the mixer force the channel to have a 0 us pulse 
duration.  The default before was neutral in failsafe.
 2011-05-11 20:09:28 -05:00
James Cotton
5d28276c49 Reshuffle memory allocation on CC after FlightStatus object introduced 2011-05-11 17:35:52 -05:00
James Cotton
fdd591b700 OP-488: If the FirmwareIAP receives a halt signal but system is not disarmed 
abort the halt.
 2011-05-10 14:40:21 -05:00
James Cotton
163d41fb60 OP-466: Make the test output panel work when there is not a valid mixer 
configured.  However unlike previous patch keeps alarms showing so you will be
unable to arm normally.
 2011-05-10 02:43:55 -05:00
James Cotton
d140d9c1fc Fix from Ivan for BootloaderUpdater not building with 4.5.1 2011-05-10 02:11:34 -05:00
elafargue
f904e09353 Merge branch 'master' into OP-307_Firmware_Description_Packaging 2011-05-10 08:31:25 +02:00
James Cotton
808e3c8ea2 Fix bug I made where guidance didn't look at new flight status object 2011-05-09 11:37:06 -05:00
James Cotton
fb8417a0ff Merge remote-tracking branch 'origin/op_475_476_calibrate_during_arming' 2011-05-09 09:23:16 -05:00
elafargue
c4c9be37c6 Fix typo 2011-05-09 15:30:02 +02:00
elafargue
437d33526a Add command line arguments to versionblob.py so that it is easier to use. 2011-05-09 10:54:29 +02:00
elafargue
adb1e77869 Merge branch 'master' into OP-307_Firmware_Description_Packaging 2011-05-09 10:18:00 +02:00
Stacey Sheldon
b2b1c184de stopwatch: Add support for timers 5-8 
This fixes the OP bootloader getting stuck in the
bootloader forever when USB is plugged in.

This also fails hard on being passed an unsupported
timer value so that this can be caught more easily
in the future.
 2011-05-08 12:41:02 -04:00
Stacey Sheldon
965867de7a gdb: add config file for coptercontrol bootloader 2011-05-08 12:40:29 -04:00
Stacey Sheldon
29ec2f198b build: convert all app loads to require bootloaders 
This change is made up of a number of tightly coupled
changes:
 - Deprecate the use of the USE_BOOTLOADER command-line
   option.  It is now hard-coded in each Makefile.
   Overriding it on the command line is not allowed.
 - Split apart the memory declaration and the section
   declaration in all linker files (*_memory.ld and
   *_sections.ld).
 - Describe the split between bootloader and app sections
   of flash in each board's _memory.ld file.
 - Change program target to selectively erase flash so
   that the installed bootloader is preserved across even
   JTAG programming operations.
 - All elf files are built with debug symbols and are not
   stripped.  This should help debugging with gdb.  The
   images programmed on the boards are all .bin files now
   which do not include symbols.
 2011-05-08 12:40:29 -04:00
Stacey Sheldon
465034cf94 bootloaders: always build with debug symbols enabled 
This makes it easier to use gdb to debug issues.  This does
not change the -O flags, only makes -g always on and does
not strip the .elf files.
 2011-05-08 12:40:28 -04:00
Stacey Sheldon
18ea93119f build: Add support for BL_Updaters to top-level makefile 
New targets:
 - make blupd_all_clean
 - make blupd_all
 - make blupd_openpilot
 - make blupd_ahrs
 - make blupd_coptercontrol
 - make blupd_pipxtreme

These targets are also included in the 'all_flight' target.
 2011-05-08 12:40:28 -04:00
elafargue
a2656ed589 Merge branch 'master' into OP-307_Firmware_Description_Packaging 2011-05-08 00:08:09 +02:00
Stacey Sheldon
2301600f11 Make missing definitions for essential macros more obvious 2011-05-07 18:05:50 -04:00
Stacey Sheldon
7e99419c8a build: Add support for %.bin.o generation 
The .bin.o rule places the contents of a raw .bin file
into an .o file wrapped within fixed symbols for start
and end.  This can be used to embed a binary file inside
of an executable.

The symbols for the embedded binary blob are:
 _binary_start
 _binary_end
 _binary_size

NOTE: The way the .bin.o rule is currently written, you
can only embed one binary blob in an executable since the
symbol names will collide if you add multiple blobs.  This
limitation is easily removed later if necessary.
 2011-05-07 18:05:50 -04:00
Stacey Sheldon
58a2c71532 line-end changes only 2011-05-07 18:05:50 -04:00
James Cotton
4ec0263dfc OP-476: If AttitudeSettings.ZeroDuringArming is true, then while arming (1 
second) it will speed up the estimate of gyro bias.
 2011-05-07 15:29:21 -05:00
James Cotton
8e06eb3162 Get the "IDLE_NO_LOAD" level closer for CC with optimizations on, but it would 
be great if someone actually calibrated this for me!
 2011-05-07 15:07:14 -05:00
James Cotton
10e55c25bc OP-475: More changes to get the FlightStatus object to work for Armed and 
FlightMode
 2011-05-07 15:06:04 -05:00
James Cotton
80c839d5bb OP-475: Starting to use the new FlightStatus object 2011-05-07 13:17:21 -05:00
James Cotton
ae841d57cb OP-475: New FlightStatus object. Removed from ManualControlCommand. Won't 
build yet.
 2011-05-07 12:45:35 -05:00
James Cotton
e2819c6815 Restructure the ManualControlCommand code to be much more readable. Also 
facilitates the new FlightMode object.
 2011-05-07 12:43:27 -05:00
James Cotton
d1fb254a41 Merge branch 'master' into bugfix-flight 2011-05-07 06:56:54 -05:00
James Cotton
d3247c9946 Remove unused code from coptercontrol.c 2011-05-07 06:56:20 -05:00
James Cotton
fef1e2dc2e Merge remote-tracking branch 'origin/OP-174_Sambas_BaroAlt_to_ETOSD' 2011-05-07 04:41:13 -05:00
elafargue
98c38a4e5e Bugfix 2011-05-07 09:25:27 +02:00
elafargue
a216d050ab Prototype 'version blob' python script to generate a binary description file to append to end of firmware before uploading. 2011-05-06 21:46:36 +02:00
Corvus Corax
5f749dda7e Modules/ManualControl: bugfix GCS Control was broken due to connection state and arming being checked outside of the "object_writable()? {}" if clause 2011-05-06 01:26:34 +02:00
Corvus Corax
39a9087c98 Merge branch 'master' into bugfix-flight 2011-05-06 00:29:31 +02:00
James Cotton
7e418866be Update the AttitudeSetting object to make the board rotation more human 
readable and update the GCS fields appropriately.
 2011-05-05 13:04:56 -05:00
Corvus Corax
59dd0637a3 PiOS_posix: Add support for pios_debug API, to allow building of GPS module in x86 environment 2011-05-05 14:57:30 +02:00
James Cotton
dd36192e37 Merge branch 'bugfix-flight' 2011-05-05 00:36:55 -05:00
James Cotton
93d8449814 OP-474: When throttle < 0 and "spin while armed" mode enabled don't take into 
account stabilization or stick - stay at neutral
 2011-05-05 00:32:15 -05:00
James Cotton
21a71e5294 Merge branch 'master' into spin_while_armed 
Added back the "Spin arming" button to output panel and made it work
Conflicts:
	ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
	ground/openpilotgcs/src/plugins/config/output.ui
 2011-05-05 00:23:51 -05:00
James Cotton
05684e966b OP-470: Make arm/disarm threshold 50% instead of 90% 2011-05-04 22:53:00 -05:00
James Cotton
7e98bb42c9 OP-462: Patch from OS to override the debug flag for bootloaders 2011-05-03 12:54:11 -05:00
James Cotton
401a989c63 OP-474: Add option to ActuatorSettings to allow people to request their propellers always spin an neutral when armed (I don't recommend this). 2011-05-03 00:08:39 -05:00
James Cotton
9daca1ac41 OP-469: Wasn't paying attention and missed a line 2011-05-02 22:22:57 -05:00
James Cotton
2e552f767e OP-469: Wasn't paying attention and missed a line 2011-05-02 22:22:16 -05:00
Corvus Corax
8d8144f233 OP-441 Prevent double alarm set ( setFailsafe() already sets alarm to CRITICAL ) 2011-05-02 18:00:12 +02:00
James Cotton
9afedc0139 OP-469: Fix a bug I wrote where MaximumRate instead of ManualRate was used to 
scale sticks in rate mode.
 2011-05-02 04:33:32 -05:00
James Cotton
d9221fac06 Merge remote-tracking branch 'origin/OP-452_InputConfiguration' 2011-05-02 03:40:59 -05:00
James Cotton
1f36e00287 Merge remote-tracking branch 'origin/OP_442_OP_437_PT_Dreamer' 2011-05-02 03:34:09 -05:00
David Carlson
341dbd7ad9 Change blink rate to Hz rather than 1/2 Hz. As per comments in review OPReview-18. 2011-05-02 00:50:42 -07:00
David Buzz Carlson
edd5ad8a78 Update Stat LED blink rate when armed to 5 Hz from its current 1 Hz. This allows a more drastic change in LED behavior to highlight that the aircraft WILL NOW CUT YOUR FINGER OFF IF YOU DON'T RESPECT IT!! 2011-05-02 00:50:42 -07:00
David Buzz Carlson
c93ab7e723 Change CC, OP MB, and AHRS to use bootloader by default. 
Also change AttitudeActual to update at 10Hz rather than 2 Hz.  The increased bandwidth is minimal and the resulting "polish" that it adds to the look-and-feel of the GCS is signifcant.
 2011-05-02 00:50:42 -07:00
zedamota
5dd8a3eea2 Fix a silly mistake on the CC erase_flash compile flag. 2011-05-01 20:10:27 +01:00
elafargue
6b00ed3866 NACKs implemented on both ground and flight side, connect time goes under a few seconds now. 2011-04-30 19:32:42 +02:00
zedamota
3d209f2166 Fix to erase option. Erase must be performed after board initialization. 2011-04-30 14:17:44 +01:00
James Cotton
62e3d35a97 OP-452 Read the channel times even if a bad mixer is configured 2011-04-29 17:57:04 -05:00
zedamota
8dd46e1465 Should fix the CC showing as OP. 
Added a compile flag to make a CC fw version that will erase flash.

Signed-off-by: zedamota <josembarros@hotmail.com>
 2011-04-29 23:38:26 +01:00
zedamota
6172e45c0d Should fix CopterControl showing as Openpilot on DropDown box. 2011-04-29 21:42:59 +01:00
zedamota
1cc152b4dd More cleaning, moved stopwatch files to library folder, code formatting. 2011-04-29 20:48:13 +01:00
zedamota
3132de4e48 Fixes download being slow issue. Made some cleaning also 2011-04-29 19:22:21 +01:00
Sambas
2413fd451f OP-174 ET OSD: barometric altitude works now, units must be set metric with E-Logger 2011-04-29 19:08:28 +03:00
James Cotton
5f776f0b58 Merge branch 'master' into OP-439_CorvusCorax_Bootloader-Makefile-and-OpenOCD-config-for-Linux 2011-04-27 23:41:35 -05:00
James Cotton
819bc9d441 Merge branch 'master' into OP-430_Ligi_UAVTalk-Code-Review 2011-04-26 12:49:32 -05:00
Corvus Corax
8c7f3e2720 OP-435 #ifdef covered one command too many - bugfix 2011-04-25 18:37:28 +02:00
Corvus Corax
eb9ccc2f9b OP-383 Review 11 : Removed commented out unused variables as directed by review 2011-04-25 16:36:23 +02:00
Corvus Corax
cdb6b65e64 Merge branch 'master' into OP-383_Edouard_CPUSerial_in_FirmwareIAP 2011-04-25 02:36:44 +02:00
James Cotton
69d03ca101 OP-439: Simplify further. Abstract most of the OOCD flags into the common 
firmware include and delete all the extra foss-jtag config files.  There is now
a legacy file for the revA board a second for AHRS that changes the port
 2011-04-24 10:19:00 -05:00
Corvus Corax
ee7179bd53 OP-439 unified OpenOCD config for mac os x and Linux, Makefiles adapted accordingly 2011-04-24 12:10:33 +02:00
marcus bueschleb
06ac71b784 do not force telemetry update when alarm is changed - this was bypassing the MetaData of the UAVObject and seem to be a relict from times where no metadata existed - now doing it the MetaData way with onchange as updatemode - see http://forums.openpilot.org/topic/4208-systemalarms-bypassing-updatemode-from-metadata/ and OP-431 2011-04-24 03:43:05 +02:00
Corvus Corax
5d952f81e3 PIOS: BL_HELPER: refactored function names 2011-04-23 21:11:17 +02:00
Corvus Corax
150464344d BL_HELPER: call CRC_Ini() from within CRC check function 2011-04-23 20:55:21 +02:00
Corvus Corax
0a05896146 CopterControl: Added dependency: pios_bl_helper 2011-04-23 19:56:48 +02:00
Corvus Corax
357bc369db PIOS: Bootloader Helper functions should sit in HAL, not duplicated in every single architecture. 2011-04-23 19:40:41 +02:00
Corvus Corax
192e31986d PIOS, Modules/FirmwareIAP: Use correct HAL for CPU serial 2011-04-23 18:30:32 +02:00
Corvus Corax
2bf7ea2271 Modules/GPS: Make code to deal with home location optional to allow a sleeker GPS module for RAM challenged systems 2011-04-23 16:49:07 +02:00
marcus bueschleb
b7eba1f9b9 made all periods unsigned 2011-04-20 12:33:16 +02:00
elafargue
e4112e210f Reduce size of FirmwareIAPObj to 40 bytes: only takes the 40 first bytes of the firmware description, ignores the rest. Makes the FWIAP UAVObject more decent size-wise, and does not break USB TX anymore. 2011-04-19 20:45:49 +02:00
elafargue
45e92d654e Implemented support for the Unique STM32 CPU serial number in the firmwareIAP object. 2011-04-19 00:31:20 +02:00
corvus
08eabd21e4 Fixed files with mixed line endings 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3168 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-15 12:03:20 +00:00
peabody124
3afdc7e41c CC-24: Rotate the CC board at any angle relative to "flat and level" with GCS 
config plugin updates.  Has not been tested in flight yet although seems
sensible so please be careful when using this code.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3166 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-15 06:37:16 +00:00
edouard
08b154590d Correct a typo in the CC bootloader USB descriptor define file (in the comments) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3164 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-14 21:35:09 +00:00
edouard
1f88b7f5aa Remove obsolete README files. Obsolete and actually misleading... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3163 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-14 21:00:40 +00:00
chebuzz
06443b4281 OP-378 - OP/INS - Add initial support for INS. HMC5883, BMP085, BMA180, IMU300 all added. Throrough verification has not been done on any of them. main() simply calls self-test functions on all of the hardware. 
AHRS_comms still needs to be implemented.  INS/GPS functionality still needs to be implemented.  Double-check of the new drivers still needs to be done.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3162 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-14 12:46:39 +00:00
chebuzz
7fcde2f248 OP-377 PiOS/BMP085 Update BMP085 driver to be FreeRTOS agnostic 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3161 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-14 09:53:04 +00:00
chebuzz
195e93c0d6 OP-377 PiOS/BMP085 - Update BMP085 driver to be FreeRTOS agnostic. This is required since new INS does not run FreeRTOS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3160 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-14 09:46:23 +00:00
zedamota
a893cd99da flight - Linux Eclipse Workspace - cleaned the workspace. 
This file is exactly the same used in the video published on the wiki 

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3159 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-12 13:03:37 +00:00
peabody124
99c00fb9fe Revert changes to AHRS Makefile. Need to keep DEBUG=NO. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3155 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-11 18:47:36 +00:00
sambas
3b9e762b69 OP-22 Flight/PiOS: Spektrum bugfix, for other than DX7 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3154 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-11 13:42:32 +00:00
jonathan
9f5c393672 OP-191: Add svn:eol-style property for native line endings on checkout; 
Add (temporarily disabled) hooks for the rotational misalignment between the accelerometer and magnetometer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3151 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-10 18:37:32 +00:00
jonathan
c70e134cf8 Add helper function for converting an Euler rotation vector to a rotation matrix 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3150 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-10 18:33:30 +00:00
pip
33d9d31082 Modified manual control input value checking to determine RC connection state - was previously checking only the throttle channel for semi-valid input range, it now checks the Throttle, Roll, Yaw and Pitch channels for full-valid values (manual value is within min and max values). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3146 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-10 14:00:46 +00:00
dankers
d285dc6a46 Remove my old Eclipse workspace, Jose is handling these from now on. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3138 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-10 00:17:16 +00:00
zedamota
1d4eb11c0e flight - don't know why but after I commit this file under windows and try using it on Ubuntu it messes the workspace, this time I'll try to commit in nix 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3137 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-09 22:36:46 +00:00
zedamota
3f15b71755 flight - updated eclipse workspace files 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3136 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-09 18:27:19 +00:00
sambas
dabc33c71c OP-22 Flight/PiOS: fix for 11ms framerate, Spektrum supervisor timer must have atleast one interrupt between frames 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3134 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-09 14:51:39 +00:00
sambas
cdfbf8614c OP-22 Flight/PiOS: Spektrum parser handles all known TXs, or atleast should. Test it well before sending aircraft to the sky. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3133 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-09 14:17:23 +00:00
ligi
c9f9400d75 unify the style rxbytes are assembled & remove the need for a tmp-buffer 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3131 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-09 04:26:25 +00:00
zedamota
7b1d87475a Flight - Commited Linux Eclipse working workspace. A usage "movie" will follow soon. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3126 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-07 13:54:45 +00:00
corvus
8a49dbb6ab OpenPilot_posix: Added ENABLE_QUATERNION_STABILIZATION define 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3116 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-01 15:14:33 +00:00
corvus
da76192e47 Modules/Guidance: Bugfix in Position-Hold code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3112 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-31 20:08:14 +00:00
peabody124
a57c289b3a CC-24: Support mounting CC at any angle by applying a rotation. Now need to 
rotate sensors to make sure stabilization behaves well so don't use till then.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3100 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-29 02:15:57 +00:00
peabody124
48c20d37a9 OP-349 CC-32: Added a Completed operation that is returned after successful 
save or load

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3093 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-28 19:16:50 +00:00
peabody124
bd5925d526 CC-35: Separate term for CC yaw bias rate and others 
Note: AttitudeSettings changed so you'll need to re-zero it

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3090 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-28 18:42:48 +00:00
peabody124
4120937391 OP-364 OP-191: Convert the OPMap setting of HomeLocation to mGau to match the 
changes in flight code

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3083 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-28 10:40:26 +00:00
peabody124
3fc88f69e2 Covering a case that should not occur 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3081 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-26 21:02:43 +00:00
edouard
bce3d21a0f Fix FirmwareIAP module, as it failed to reset the board if the object was queried before for other purposes. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3080 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-26 12:00:08 +00:00
peabody124
e262e3c220 Convert outer position controller to PI 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3077 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-26 11:40:33 +00:00
fredericg
662a3e5cc8 OP-361 Also parse ZDA message in order to get GPS time info with new GTOP FW 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3074 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-26 11:13:11 +00:00
peabody124
eafcf35fa6 Reenable position hold 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3072 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-25 20:17:31 +00:00
edouard
f19b0efc6f CC-40 Implemented support for FirmwareIAP on Coptercontrol: you can now use the "Halt" command on the uploader gadget. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3070 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-25 13:50:13 +00:00
chebuzz
2e5863281c CC/Stabilization - Fix attitude bias not being applied over all sampled quantities 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3065 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-24 17:12:04 +00:00
fredericg
b37dd770d2 Use attitudeActualData.Yaw for course 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3064 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-24 10:56:20 +00:00
peabody124
487b039229 Earlier patch broke coding conventions for line endings 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3062 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-22 12:47:15 +00:00
peabody124
cfb2ca4e1b OP-192 Fix ahrs mag problems from TWOSTEP mag units 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3061 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-22 12:46:50 +00:00
chebuzz
183ca03cc9 CC/Makefile - Make I2C conditional compilation, disabled by default. Unterminated I2C can cause boot process to hang. Thus disabling I2C by default should help to avoid problems in the future. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3059 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-21 09:18:21 +00:00
jonathan
5d23666839 OP-191: Merge from full-calibration branch. Add orthogonality calibration to the accelerometer, and use it. Also adjust the treatment of accelerometer scale factors, such that the diagonal elements of the calibration scale factor matrix are positive. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3057 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-21 00:51:45 +00:00
jonathan
160695e546 OP-191: Merge from full-calibration branch. Add the local gravitational field strength to the home location. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3055 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-21 00:48:32 +00:00
jonathan
8aef515456 OP-191: Merge from full-calibration branch. Scale the reference magnetic field vector to units of milliguass. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3054 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-21 00:47:02 +00:00
fredericg
d270f7e987 Changes to FlightBatterySettings as discussed in forums 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3047 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-19 18:45:40 +00:00
fredericg
ef1dcf6939 rename batterysettings.xml => flightbatterysettings.xml 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3046 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-19 18:31:58 +00:00
sambas
193f9720e5 unix style output dir for all, makes eclipse users happier 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3042 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-15 19:11:56 +00:00
FredericG
ea512a3da7 OP-322 Implement Audible alarm via PWM - Different tune for GPS and Battery Alarm 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3035 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-13 17:02:19 +00:00
peabody124
0c2c70bb60 Update OSX project 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3030 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-12 09:08:23 +00:00
peabody124
b76a235940 OP-317: Fixed the FirmwareIAP resetting the AHRS board. Sorry this took me so 
long to do.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3029 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-12 09:08:12 +00:00
FredericG
c3732bad93 OP-322 Implement Audible alarm via PWM - handle new "PWM Alarm Buzzer" channel type 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3028 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-12 09:02:02 +00:00
FredericG
5bdf836027 OP-324 No code change; commented debug-code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3026 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-12 08:55:45 +00:00
pip
4fab429f50 Corrected the #ifdef line (line 26/27), it was "#ifndef STM32103CB_AHRS_H_", it's now "#ifndef STM32103CB_CC_H_" 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3022 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-10 20:22:20 +00:00
edouard
3fec8a6d72 OP-339 Update PipXtreme PID too. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3020 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 18:07:58 +00:00
pip
f4fef1bfb8 Rewrote PipX's PPM input decoder to do away with supervisor timer/monitor. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3019 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 17:36:11 +00:00
FredericG
fc18f1cb36 OP-326 Long I2C messages starve the other drivers 
We where hammered on the head with interrupts that the driver does not need, not allowing the ISRs of other drivers to run 

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3018 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 17:12:18 +00:00
FredericG
4c51e80b5b OP-340 I2C NACK causes next transfers to fail. 
Needed to clear the NACK flag in the ISR, or the next transfers seem to get a nack too because the IRQ comes back

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3017 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 16:58:37 +00:00
FredericG
f6a2584f12 No code change; commented debug-code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3016 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 16:52:09 +00:00
edouard
aa097ec400 OP-339 Update USB descriptors on CopterControl and OpenPilot to reflect the new convention. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3015 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 07:21:01 +00:00
edouard
7631aeeb48 OP-338 USB Bootloaders on OpenPilot & CopterControl boards now use the new PID, and the right values for bcdDevice. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3014 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 07:06:53 +00:00
edouard
ae32bae5c7 OP-338: Use the new convention on bcdDevice for the PipXtreme. Also use the new PID for the modem. Careful, this breaks the uploader gadget on the GCS for now! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3011 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 23:57:18 +00:00
sambas
b240915d05 PPM driver cleanup 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3010 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 18:52:50 +00:00
pip
0d389c4d34 Forgot to comment out serial port debugging option .. sorry - again 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3009 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 18:32:16 +00:00
pip
48cecfaacd Forgot to commit this file - sorry 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3008 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 18:29:48 +00:00
sambas
0eeacb44bd PPM driver for OP, first test 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3007 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 18:08:13 +00:00
cwabbott
f657dba49f Modified sitl win32 to output to /build/sitl_win32 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3006 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 02:36:33 +00:00
corvus
be1837ecd5 SiTL/SimPosix: Fixed compilation issue because of Timer macro eedeclaration in portmacro.h 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3005 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-07 22:43:20 +00:00
peabody124
b2abc73ae3 AHRS: Move getting mag data back into the main loop 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2998 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-07 19:28:25 +00:00
peabody124
aea0695f70 AHRS: Move out of bound checks to main loop instead of when getting the accel 
data

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2997 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-07 19:28:11 +00:00
pip
bfcfb3e88e Fixed problem with board rebooting when changing mode from PPM Rx or PPM Tx to some other mode. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2996 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-07 17:46:39 +00:00
pip
3e67bf19dc PPM generator module now working (the modem can generate a nice precise PPM stream) - not yet done the RF streaming side of PPM though. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2995 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-07 15:00:38 +00:00
pip
b71bc49ce3 Updated USB descriptor to use the BCD values stated on the wiki page http://wiki.openpilot.org/display/Doc/Firmware+USB+descriptors 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2993 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-06 21:08:12 +00:00
pip
88b2d360a3 Various minor changes to do with switch modem mode on the fly but mainly PPM Input decoder (with error/noise detection) is now working 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2992 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-06 18:52:18 +00:00
FredericG
baf0850690 OP-336 CPU usage calculation incorrect when armed - no measure the time between calculations 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2987 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-06 11:50:54 +00:00
FredericG
5554973cea OP-174 ET OSD support - fix for writing configurations - temp workaround for what seems to be an issue with I2C driver OP-305 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2986 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-06 11:19:29 +00:00
corvus
7c4f29508b useless note on documentation (needs update) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2982 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-06 00:29:50 +00:00
FredericG
6d0679b9e9 Small fix to PIOS_DEBUG_PinValue8Bit(), was also influencing other IO pins 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2975 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-05 12:53:52 +00:00
FredericG
35475820ad 2 new PIOS_DEBUG functions to output a value on the debug-pins. In its current implementation it will probably not work on CC.... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2971 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-05 09:23:57 +00:00
FredericG
5f52ef6aaa fix: PIOS_DEBUG_Init() was no longer called 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2970 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-05 09:21:32 +00:00
osnwt
8d085552fb CC: Modules/Attitude/attitude.c: unused headers removed (do we have another?) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2967 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-04 21:12:37 +00:00
osnwt
e9d507dd3e CC: Fixed compilation error after uavobject rename 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2966 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-04 20:56:58 +00:00
pip
7317891d39 Slight reorganisation to allow easier continuous data transmission (DATA streaming and PPM streaming) and allow easier total configuration changes on the fly. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2961 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-04 08:34:44 +00:00
FredericG
32c7596636 OP-324 Make NMEA parser more resilient to corrupted messages - For the new GTOP GPS FW, parsing of the VTG message is needed to get Heading and GroundSpeed 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2960 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-04 07:57:18 +00:00
FredericG
c890f596e4 NMEA: minor change to debug-messages 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2953 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 19:53:10 +00:00
pip
eaea8f28cf Starting to add continuous streaming modes (DATA and PPM). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2951 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 16:32:43 +00:00
scott
f1ee47dcff Added #include "pios_config.h" to make sim_posix build again. Some alarm constants were missing. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2945 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 05:09:11 +00:00
peabody124
e4d9ef98a5 OP-315: Display run time as a percentage 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2944 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:45 +00:00
peabody124
97163d2193 Update OSX project 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2943 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:42 +00:00
peabody124
ec29920a8d OP-315: Clean up RTC calls into a separate function. Unfortunately still need 
to add function headers into portmacro.h

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2942 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:38 +00:00
peabody124
3e2c542eef OP-315 Use RTC at 65 khz as time base for task switching 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2941 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:34 +00:00
peabody124
528f74b512 OP-315: Extend TaskInfo to include run time stats. Still need to configure a 
timer to run at around 10 khz.  RTC a good option.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2940 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:29 +00:00
peabody124
267efe0b88 OP-315: Patch to FreeRTOS port to allow querying the run time for tasks. This 
will need to be forward ported (and ideally pushed up stream) for FreeRTOS
updates

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2939 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:22 +00:00
vassilis
b084ea7ea1 FlightPlan/Python: Updated object generator to create a Python file for each UAVObject. It is now possible to access all UAVObjects from the FlightPlan Python scripts. 
Warning: The memory utilization when importing objects is unacceptably high making it unusable in the flight code at this point. It can be however used with the SITL simulator. Some more investigation is needed to understand why several kb of memory are used each time a module is imported (even before any functions are called or objects from the module are created). 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2938 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 02:22:50 +00:00